brcm63xx: update development kernel to linux 3.14
authorJonas Gorski <jogo@openwrt.org>
Fri, 4 Apr 2014 10:17:08 +0000 (10:17 +0000)
committerJonas Gorski <jogo@openwrt.org>
Fri, 4 Apr 2014 10:17:08 +0000 (10:17 +0000)
Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40380

291 files changed:
target/linux/brcm63xx/config-3.13 [deleted file]
target/linux/brcm63xx/config-3.14 [new file with mode: 0644]
target/linux/brcm63xx/patches-3.13/001-spi-add-bcm63xx-HSSPI-driver.patch [deleted file]
target/linux/brcm63xx/patches-3.13/002-MIPS-BCM63XX-expose-the-HSSPI-clock.patch [deleted file]
target/linux/brcm63xx/patches-3.13/003-MIPS-BCM63XX-setup-the-HSSPI-clock-rate.patch [deleted file]
target/linux/brcm63xx/patches-3.13/004-MIPS-BCM63XX-add-HSSPI-IRQ-and-register-offsets.patch [deleted file]
target/linux/brcm63xx/patches-3.13/005-MIPS-BCM63XX-add-HSSPI-platform-device-and-register-.patch [deleted file]
target/linux/brcm63xx/patches-3.13/006-spi-bcm63xx-don-t-reject-reads-256-bytes.patch [deleted file]
target/linux/brcm63xx/patches-3.13/007-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch [deleted file]
target/linux/brcm63xx/patches-3.13/008-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch [deleted file]
target/linux/brcm63xx/patches-3.13/009-MIPS-BMIPS-change-compile-time-checks-to-runtime-che.patch [deleted file]
target/linux/brcm63xx/patches-3.13/010-MIPS-BMIPS-merge-CPU-options-into-one-option.patch [deleted file]
target/linux/brcm63xx/patches-3.13/011-MIPS-BMIPS-select-CPU_SUPPORTS_HIGHMEM.patch [deleted file]
target/linux/brcm63xx/patches-3.13/012-MIPS-BMIPS-select-CPU_HAS_PREFETCH.patch [deleted file]
target/linux/brcm63xx/patches-3.13/013-MIPS-BMIPS-extend-BMIPS3300-to-include-BMIPS32.patch [deleted file]
target/linux/brcm63xx/patches-3.13/014-MIPS-BMIPS-add-a-smp-ops-registration-helper.patch [deleted file]
target/linux/brcm63xx/patches-3.13/015-MIPS-BCM63XX-always-register-bmips-smp-ops.patch [deleted file]
target/linux/brcm63xx/patches-3.13/016-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch [deleted file]
target/linux/brcm63xx/patches-3.13/017-MIPS-cpu-type-guard-BMIPS-variants-with-SYS_HAS_CPU_.patch [deleted file]
target/linux/brcm63xx/patches-3.13/018-MIPS-BCM63XX-drop-SYS_HAS_CPU_MIPS32R1.patch [deleted file]
target/linux/brcm63xx/patches-3.13/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [deleted file]
target/linux/brcm63xx/patches-3.13/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [deleted file]
target/linux/brcm63xx/patches-3.13/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [deleted file]
target/linux/brcm63xx/patches-3.13/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [deleted file]
target/linux/brcm63xx/patches-3.13/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-3.13/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-3.13/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-3.13/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-3.13/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-3.13/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-3.13/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [deleted file]
target/linux/brcm63xx/patches-3.13/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch [deleted file]
target/linux/brcm63xx/patches-3.13/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch [deleted file]
target/linux/brcm63xx/patches-3.13/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch [deleted file]
target/linux/brcm63xx/patches-3.13/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch [deleted file]
target/linux/brcm63xx/patches-3.13/205-USB-fix-bcm63xx_udc.patch [deleted file]
target/linux/brcm63xx/patches-3.13/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [deleted file]
target/linux/brcm63xx/patches-3.13/300-reset_buttons.patch [deleted file]
target/linux/brcm63xx/patches-3.13/301-led_count.patch [deleted file]
target/linux/brcm63xx/patches-3.13/302-extended-platform-devices.patch [deleted file]
target/linux/brcm63xx/patches-3.13/303-spi-board-info.patch [deleted file]
target/linux/brcm63xx/patches-3.13/304-boardid_fixup.patch [deleted file]
target/linux/brcm63xx/patches-3.13/308-board_leds_naming.patch [deleted file]
target/linux/brcm63xx/patches-3.13/309-cfe_version_mod.patch [deleted file]
target/linux/brcm63xx/patches-3.13/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch [deleted file]
target/linux/brcm63xx/patches-3.13/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch [deleted file]
target/linux/brcm63xx/patches-3.13/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch [deleted file]
target/linux/brcm63xx/patches-3.13/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch [deleted file]
target/linux/brcm63xx/patches-3.13/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch [deleted file]
target/linux/brcm63xx/patches-3.13/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch [deleted file]
target/linux/brcm63xx/patches-3.13/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch [deleted file]
target/linux/brcm63xx/patches-3.13/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch [deleted file]
target/linux/brcm63xx/patches-3.13/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch [deleted file]
target/linux/brcm63xx/patches-3.13/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch [deleted file]
target/linux/brcm63xx/patches-3.13/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch [deleted file]
target/linux/brcm63xx/patches-3.13/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch [deleted file]
target/linux/brcm63xx/patches-3.13/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch [deleted file]
target/linux/brcm63xx/patches-3.13/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch [deleted file]
target/linux/brcm63xx/patches-3.13/324-MIPS-BCM63XX-protect-irq-register-accesses.patch [deleted file]
target/linux/brcm63xx/patches-3.13/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch [deleted file]
target/linux/brcm63xx/patches-3.13/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch [deleted file]
target/linux/brcm63xx/patches-3.13/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch [deleted file]
target/linux/brcm63xx/patches-3.13/328-cfe_simplify_detection.patch [deleted file]
target/linux/brcm63xx/patches-3.13/329-bcm63xxpart_use_cfedetection.patch [deleted file]
target/linux/brcm63xx/patches-3.13/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [deleted file]
target/linux/brcm63xx/patches-3.13/331-MIPS-BCM63XX-define-variant-id-field.patch [deleted file]
target/linux/brcm63xx/patches-3.13/332-MIPS-BCM63XX-detect-bcm6328-variants.patch [deleted file]
target/linux/brcm63xx/patches-3.13/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [deleted file]
target/linux/brcm63xx/patches-3.13/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch [deleted file]
target/linux/brcm63xx/patches-3.13/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [deleted file]
target/linux/brcm63xx/patches-3.13/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [deleted file]
target/linux/brcm63xx/patches-3.13/337-MIPS-BCM63XX-widen-cpuid-field.patch [deleted file]
target/linux/brcm63xx/patches-3.13/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [deleted file]
target/linux/brcm63xx/patches-3.13/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-3.13/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-3.13/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-3.13/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [deleted file]
target/linux/brcm63xx/patches-3.13/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-3.13/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [deleted file]
target/linux/brcm63xx/patches-3.13/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [deleted file]
target/linux/brcm63xx/patches-3.13/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [deleted file]
target/linux/brcm63xx/patches-3.13/347-MIPS-BCM6318-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-3.13/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [deleted file]
target/linux/brcm63xx/patches-3.13/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-3.13/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-3.13/351-set-board-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-3.13/400-bcm963xx_flashmap.patch [deleted file]
target/linux/brcm63xx/patches-3.13/401-bcm963xx_real_rootfs_length.patch [deleted file]
target/linux/brcm63xx/patches-3.13/402_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/brcm63xx/patches-3.13/403-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/brcm63xx/patches-3.13/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [deleted file]
target/linux/brcm63xx/patches-3.13/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [deleted file]
target/linux/brcm63xx/patches-3.13/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [deleted file]
target/linux/brcm63xx/patches-3.13/412-MTD-physmap-allow-passing-pp_data.patch [deleted file]
target/linux/brcm63xx/patches-3.13/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [deleted file]
target/linux/brcm63xx/patches-3.13/414-MTD-m25p80-allow-passing-pp_data.patch [deleted file]
target/linux/brcm63xx/patches-3.13/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [deleted file]
target/linux/brcm63xx/patches-3.13/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [deleted file]
target/linux/brcm63xx/patches-3.13/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch [deleted file]
target/linux/brcm63xx/patches-3.13/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch [deleted file]
target/linux/brcm63xx/patches-3.13/420-BCM63XX-add-endian-check-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-3.13/421-BCM63XX-add-led-pin-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-3.13/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [deleted file]
target/linux/brcm63xx/patches-3.13/423-bcm63xx_enet_add_b53_support.patch [deleted file]
target/linux/brcm63xx/patches-3.13/424-bcm63xx_enet_no_request_mem_region.patch [deleted file]
target/linux/brcm63xx/patches-3.13/500-board-D4PW.patch [deleted file]
target/linux/brcm63xx/patches-3.13/501-board-NB4.patch [deleted file]
target/linux/brcm63xx/patches-3.13/502-board-96338W2_E7T.patch [deleted file]
target/linux/brcm63xx/patches-3.13/503-board-CPVA642.patch [deleted file]
target/linux/brcm63xx/patches-3.13/504-board_dsl_274xb_rev_c.patch [deleted file]
target/linux/brcm63xx/patches-3.13/505-board_spw500v.patch [deleted file]
target/linux/brcm63xx/patches-3.13/506-board_gw6200_gw6000.patch [deleted file]
target/linux/brcm63xx/patches-3.13/507-board-MAGIC.patch [deleted file]
target/linux/brcm63xx/patches-3.13/508-board_hw553.patch [deleted file]
target/linux/brcm63xx/patches-3.13/509-board_rta1320_16m.patch [deleted file]
target/linux/brcm63xx/patches-3.13/510-board_spw303v.patch [deleted file]
target/linux/brcm63xx/patches-3.13/511-board_V2500V.patch [deleted file]
target/linux/brcm63xx/patches-3.13/512-board_BTV2110.patch [deleted file]
target/linux/brcm63xx/patches-3.13/513-board_livebox.patch [deleted file]
target/linux/brcm63xx/patches-3.13/514-board_ct536_ct5621.patch [deleted file]
target/linux/brcm63xx/patches-3.13/515-board_DWV-S0_fixes.patch [deleted file]
target/linux/brcm63xx/patches-3.13/516-board_96348A-122.patch [deleted file]
target/linux/brcm63xx/patches-3.13/517-RTA1205W_16_uart_fixes.patch [deleted file]
target/linux/brcm63xx/patches-3.13/519_board_CPVA502plus.patch [deleted file]
target/linux/brcm63xx/patches-3.13/520-bcm63xx-add-support-for-96368MVWG-board.patch [deleted file]
target/linux/brcm63xx/patches-3.13/521-bcm63xx-add-support-for-96368MVNgr-board.patch [deleted file]
target/linux/brcm63xx/patches-3.13/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-3.13/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-3.13/524-board_dsl_274xb_rev_f.patch [deleted file]
target/linux/brcm63xx/patches-3.13/525-board_96348w3.patch [deleted file]
target/linux/brcm63xx/patches-3.13/526-board_CT6373-1.patch [deleted file]
target/linux/brcm63xx/patches-3.13/527-board_dva-g3810bn-tl-1.patch [deleted file]
target/linux/brcm63xx/patches-3.13/528-board_nb6.patch [deleted file]
target/linux/brcm63xx/patches-3.13/529-board_fast2604.patch [deleted file]
target/linux/brcm63xx/patches-3.13/530-board_963281T_TEF.patch [deleted file]
target/linux/brcm63xx/patches-3.13/531-board_96328A-1441N1.patch [deleted file]
target/linux/brcm63xx/patches-3.13/532-board_96328a-1241N.patch [deleted file]
target/linux/brcm63xx/patches-3.13/533-board_rta770bw.patch [deleted file]
target/linux/brcm63xx/patches-3.13/534-board_hw556.patch [deleted file]
target/linux/brcm63xx/patches-3.13/535-board_rta770w.patch [deleted file]
target/linux/brcm63xx/patches-3.13/536-board_fast2704.patch [deleted file]
target/linux/brcm63xx/patches-3.13/537-board_fast2504n.patch [deleted file]
target/linux/brcm63xx/patches-3.13/550-alice_gate2_leds.patch [deleted file]
target/linux/brcm63xx/patches-3.13/551-96348gw_a_leds.patch [deleted file]
target/linux/brcm63xx/patches-3.13/552-board_96348gw-10_reset_button.patch [deleted file]
target/linux/brcm63xx/patches-3.13/553-boards_probe_switch.patch [deleted file]
target/linux/brcm63xx/patches-3.13/554-board_DWVS0_leds_buttons.patch [deleted file]
target/linux/brcm63xx/patches-3.13/555-board_96318ref.patch [deleted file]
target/linux/brcm63xx/patches-3.13/556-board_96318ref_p300.patch [deleted file]
target/linux/brcm63xx/patches-3.13/557-board_bcm963269bhr.patch [deleted file]
target/linux/brcm63xx/patches-3.13/558-board_AR1004G.patch [deleted file]
target/linux/brcm63xx/patches-3.13/559-board_vw6339gu.patch [deleted file]
target/linux/brcm63xx/patches-3.13/560-board_963268gu_p300.patch [deleted file]
target/linux/brcm63xx/patches-3.13/800-wl_exports.patch [deleted file]
target/linux/brcm63xx/patches-3.13/801-ssb_export_fallback_sprom.patch [deleted file]
target/linux/brcm63xx/patches-3.13/802-rtl8367r_fix_RGMII_support.patch [deleted file]
target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/301-led_count.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/324-MIPS-BCM63XX-protect-irq-register-accesses.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/328-cfe_simplify_detection.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/329-bcm63xxpart_use_cfedetection.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/501-board-NB4.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/508-board_hw553.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/513-board_livebox.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/528-board_nb6.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/534-board_hw556.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/800-wl_exports.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch [new file with mode: 0644]

diff --git a/target/linux/brcm63xx/config-3.13 b/target/linux/brcm63xx/config-3.13
deleted file mode 100644 (file)
index 9cf4d60..0000000
+++ /dev/null
@@ -1,195 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_B53=y
-CONFIG_B53_MMAP_DRIVER=y
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-CONFIG_B53_SPI_DRIVER=y
-# CONFIG_B53_SRAB_DRIVER is not set
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_8250 is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_NET_UTILS=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RX_BUSY_POLL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
-# CONFIG_ZBUD is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/config-3.14 b/target/linux/brcm63xx/config-3.14
new file mode 100644 (file)
index 0000000..2ab663e
--- /dev/null
@@ -0,0 +1,199 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_AUDIT=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_B53=y
+CONFIG_B53_MMAP_DRIVER=y
+CONFIG_B53_PHY_DRIVER=y
+CONFIG_B53_PHY_FIXUP=y
+CONFIG_B53_SPI_DRIVER=y
+# CONFIG_B53_SRAB_DRIVER is not set
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_3368=y
+CONFIG_BCM63XX_CPU_6318=y
+CONFIG_BCM63XX_CPU_63268=y
+CONFIG_BCM63XX_CPU_6328=y
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_CPU_6362=y
+CONFIG_BCM63XX_CPU_6368=y
+CONFIG_BCM63XX_EHCI=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_OHCI=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BCM63XX_WDT=y
+CONFIG_BOARD_BCM963XX=y
+# CONFIG_BOARD_LIVEBOX is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_BMIPS=y
+CONFIG_CPU_BMIPS32_3300=y
+CONFIG_CPU_BMIPS4350=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM63XX=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KEXEC=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+# CONFIG_MLX5_CORE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_BCM63XX_PARTS=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+# CONFIG_PCIEAER is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RELAY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_BCM63XX=y
+CONFIG_SPI_BCM63XX_HSSPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_BMIPS=y
+CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
+CONFIG_SYS_HAS_CPU_BMIPS4350=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WEAK_ORDERING=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-3.13/001-spi-add-bcm63xx-HSSPI-driver.patch b/target/linux/brcm63xx/patches-3.13/001-spi-add-bcm63xx-HSSPI-driver.patch
deleted file mode 100644 (file)
index 0cd7982..0000000
+++ /dev/null
@@ -1,531 +0,0 @@
-From 8e051b79ae3f66dbad96312fe2976401c28d2148 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 5/5] spi: add bcm63xx HSSPI driver
-
-Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.
-
-It does feature some new modes like 3-wire or dual spi, but neither of it
-is currently implemented.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/Kconfig             |   7 +
- drivers/spi/Makefile            |   1 +
- drivers/spi/spi-bcm63xx-hsspi.c | 484 ++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 492 insertions(+)
- create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -118,6 +118,13 @@ config SPI_BCM63XX
-       help
-           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
-+config SPI_BCM63XX_HSSPI
-+      tristate "Broadcom BCM63XX HS SPI controller driver"
-+      depends on BCM63XX || COMPILE_TEST
-+      help
-+        This enables support for the High Speed SPI controller present on
-+        newer Broadcom BCM63XX SoCs.
-+
- config SPI_BITBANG
-       tristate "Utilities for Bitbanging SPI masters"
-       help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_ATH79)                      += spi-ath79.o
- obj-$(CONFIG_SPI_AU1550)              += spi-au1550.o
- obj-$(CONFIG_SPI_BCM2835)             += spi-bcm2835.o
- obj-$(CONFIG_SPI_BCM63XX)             += spi-bcm63xx.o
-+obj-$(CONFIG_SPI_BCM63XX_HSSPI)               += spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN5XX)             += spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_V3)               += spi-bfin-v3.o
- obj-$(CONFIG_SPI_BFIN_SPORT)          += spi-bfin-sport.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm63xx-hsspi.c
-@@ -0,0 +1,484 @@
-+/*
-+ * Broadcom BCM63XX High Speed SPI Controller driver
-+ *
-+ * Copyright 2000-2010 Broadcom Corporation
-+ * Copyright 2012-2013 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+#include <linux/mutex.h>
-+
-+#define HSSPI_GLOBAL_CTRL_REG                 0x0
-+#define GLOBAL_CTRL_CS_POLARITY_SHIFT         0
-+#define GLOBAL_CTRL_CS_POLARITY_MASK          0x000000ff
-+#define GLOBAL_CTRL_PLL_CLK_CTRL_SHIFT                8
-+#define GLOBAL_CTRL_PLL_CLK_CTRL_MASK         0x0000ff00
-+#define GLOBAL_CTRL_CLK_GATE_SSOFF            BIT(16)
-+#define GLOBAL_CTRL_CLK_POLARITY              BIT(17)
-+#define GLOBAL_CTRL_MOSI_IDLE                 BIT(18)
-+
-+#define HSSPI_GLOBAL_EXT_TRIGGER_REG          0x4
-+
-+#define HSSPI_INT_STATUS_REG                  0x8
-+#define HSSPI_INT_STATUS_MASKED_REG           0xc
-+#define HSSPI_INT_MASK_REG                    0x10
-+
-+#define HSSPI_PINGx_CMD_DONE(i)                       BIT((i * 8) + 0)
-+#define HSSPI_PINGx_RX_OVER(i)                        BIT((i * 8) + 1)
-+#define HSSPI_PINGx_TX_UNDER(i)                       BIT((i * 8) + 2)
-+#define HSSPI_PINGx_POLL_TIMEOUT(i)           BIT((i * 8) + 3)
-+#define HSSPI_PINGx_CTRL_INVAL(i)             BIT((i * 8) + 4)
-+
-+#define HSSPI_INT_CLEAR_ALL                   0xff001f1f
-+
-+#define HSSPI_PINGPONG_COMMAND_REG(x)         (0x80 + (x) * 0x40)
-+#define PINGPONG_CMD_COMMAND_MASK             0xf
-+#define PINGPONG_COMMAND_NOOP                 0
-+#define PINGPONG_COMMAND_START_NOW            1
-+#define PINGPONG_COMMAND_START_TRIGGER                2
-+#define PINGPONG_COMMAND_HALT                 3
-+#define PINGPONG_COMMAND_FLUSH                        4
-+#define PINGPONG_CMD_PROFILE_SHIFT            8
-+#define PINGPONG_CMD_SS_SHIFT                 12
-+
-+#define HSSPI_PINGPONG_STATUS_REG(x)          (0x84 + (x) * 0x40)
-+
-+#define HSSPI_PROFILE_CLK_CTRL_REG(x)         (0x100 + (x) * 0x20)
-+#define CLK_CTRL_FREQ_CTRL_MASK                       0x0000ffff
-+#define CLK_CTRL_SPI_CLK_2X_SEL                       BIT(14)
-+#define CLK_CTRL_ACCUM_RST_ON_LOOP            BIT(15)
-+
-+#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x)      (0x104 + (x) * 0x20)
-+#define SIGNAL_CTRL_LATCH_RISING              BIT(12)
-+#define SIGNAL_CTRL_LAUNCH_RISING             BIT(13)
-+#define SIGNAL_CTRL_ASYNC_INPUT_PATH          BIT(16)
-+
-+#define HSSPI_PROFILE_MODE_CTRL_REG(x)                (0x108 + (x) * 0x20)
-+#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT     8
-+#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT     12
-+#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT     16
-+#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT     18
-+#define MODE_CTRL_MODE_3WIRE                  BIT(20)
-+#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT               24
-+
-+#define HSSPI_FIFO_REG(x)                     (0x200 + (x) * 0x200)
-+
-+
-+#define HSSPI_OP_CODE_SHIFT                   13
-+#define HSSPI_OP_SLEEP                                (0 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ_WRITE                   (1 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_WRITE                                (2 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ                         (3 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_SETIRQ                               (4 << HSSPI_OP_CODE_SHIFT)
-+
-+#define HSSPI_BUFFER_LEN                      512
-+#define HSSPI_OPCODE_LEN                      2
-+
-+#define HSSPI_MAX_PREPEND_LEN                 15
-+
-+#define HSSPI_MAX_SYNC_CLOCK                  30000000
-+
-+#define HSSPI_BUS_NUM                         1 /* 0 is legacy SPI */
-+
-+struct bcm63xx_hsspi {
-+      struct completion done;
-+      struct mutex bus_mutex;
-+
-+      struct platform_device *pdev;
-+      struct clk *clk;
-+      void __iomem *regs;
-+      u8 __iomem *fifo;
-+
-+      u32 speed_hz;
-+      u8 cs_polarity;
-+};
-+
-+static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs,
-+                               bool active)
-+{
-+      u32 reg;
-+
-+      mutex_lock(&bs->bus_mutex);
-+      reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+
-+      reg &= ~BIT(cs);
-+      if (active == !(bs->cs_polarity & BIT(cs)))
-+              reg |= BIT(cs);
-+
-+      __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      mutex_unlock(&bs->bus_mutex);
-+}
-+
-+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs,
-+                                struct spi_device *spi, int hz)
-+{
-+      unsigned profile = spi->chip_select;
-+      u32 reg;
-+
-+      reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
-+      __raw_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg,
-+                   bs->regs + HSSPI_PROFILE_CLK_CTRL_REG(profile));
-+
-+      reg = __raw_readl(bs->regs + HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+      if (hz > HSSPI_MAX_SYNC_CLOCK)
-+              reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+      else
-+              reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+      __raw_writel(reg, bs->regs + HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+
-+      mutex_lock(&bs->bus_mutex);
-+      /* setup clock polarity */
-+      reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      reg &= ~GLOBAL_CTRL_CLK_POLARITY;
-+      if (spi->mode & SPI_CPOL)
-+              reg |= GLOBAL_CTRL_CLK_POLARITY;
-+      __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      mutex_unlock(&bs->bus_mutex);
-+}
-+
-+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
-+{
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+      unsigned chip_select = spi->chip_select;
-+      u16 opcode = 0;
-+      int pending = t->len;
-+      int step_size = HSSPI_BUFFER_LEN;
-+      const u8 *tx = t->tx_buf;
-+      u8 *rx = t->rx_buf;
-+
-+      bcm63xx_hsspi_set_clk(bs, spi, t->speed_hz);
-+      bcm63xx_hsspi_set_cs(bs, spi->chip_select, true);
-+
-+      if (tx && rx)
-+              opcode = HSSPI_OP_READ_WRITE;
-+      else if (tx)
-+              opcode = HSSPI_OP_WRITE;
-+      else if (rx)
-+              opcode = HSSPI_OP_READ;
-+
-+      if (opcode != HSSPI_OP_READ)
-+              step_size -= HSSPI_OPCODE_LEN;
-+
-+      __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
-+                   2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
-+                   2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
-+                   bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
-+
-+      while (pending > 0) {
-+              int curr_step = min_t(int, step_size, pending);
-+
-+              init_completion(&bs->done);
-+              if (tx) {
-+                      memcpy_toio(bs->fifo + HSSPI_OPCODE_LEN, tx, curr_step);
-+                      tx += curr_step;
-+              }
-+
-+              __raw_writew(opcode | curr_step, bs->fifo);
-+
-+              /* enable interrupt */
-+              __raw_writel(HSSPI_PINGx_CMD_DONE(0),
-+                           bs->regs + HSSPI_INT_MASK_REG);
-+
-+              /* start the transfer */
-+              __raw_writel(!chip_select << PINGPONG_CMD_SS_SHIFT |
-+                           chip_select << PINGPONG_CMD_PROFILE_SHIFT |
-+                           PINGPONG_COMMAND_START_NOW,
-+                           bs->regs + HSSPI_PINGPONG_COMMAND_REG(0));
-+
-+              if (wait_for_completion_timeout(&bs->done, HZ) == 0) {
-+                      dev_err(&bs->pdev->dev, "transfer timed out!\n");
-+                      return -ETIMEDOUT;
-+              }
-+
-+              if (rx) {
-+                      memcpy_fromio(rx, bs->fifo, curr_step);
-+                      rx += curr_step;
-+              }
-+
-+              pending -= curr_step;
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_hsspi_setup(struct spi_device *spi)
-+{
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+      u32 reg;
-+
-+      reg = __raw_readl(bs->regs +
-+                        HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+      reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
-+      if (spi->mode & SPI_CPHA)
-+              reg |= SIGNAL_CTRL_LAUNCH_RISING;
-+      else
-+              reg |= SIGNAL_CTRL_LATCH_RISING;
-+      __raw_writel(reg, bs->regs +
-+                   HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+
-+      mutex_lock(&bs->bus_mutex);
-+      reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+
-+      /* only change actual polarities if there is no transfer */
-+      if ((reg & GLOBAL_CTRL_CS_POLARITY_MASK) == bs->cs_polarity) {
-+              if (spi->mode & SPI_CS_HIGH)
-+                      reg |= BIT(spi->chip_select);
-+              else
-+                      reg &= ~BIT(spi->chip_select);
-+              __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      }
-+
-+      if (spi->mode & SPI_CS_HIGH)
-+              bs->cs_polarity |= BIT(spi->chip_select);
-+      else
-+              bs->cs_polarity &= ~BIT(spi->chip_select);
-+
-+      mutex_unlock(&bs->bus_mutex);
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
-+                                    struct spi_message *msg)
-+{
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+      struct spi_transfer *t;
-+      struct spi_device *spi = msg->spi;
-+      int status = -EINVAL;
-+      int dummy_cs;
-+      u32 reg;
-+
-+      /* This controller does not support keeping CS active during idle.
-+       * To work around this, we use the following ugly hack:
-+       *
-+       * a. Invert the target chip select's polarity so it will be active.
-+       * b. Select a "dummy" chip select to use as the hardware target.
-+       * c. Invert the dummy chip select's polarity so it will be inactive
-+       *    during the actual transfers.
-+       * d. Tell the hardware to send to the dummy chip select. Thanks to
-+       *    the multiplexed nature of SPI the actual target will receive
-+       *    the transfer and we see its response.
-+       *
-+       * e. At the end restore the polarities again to their default values.
-+       */
-+
-+      dummy_cs = !spi->chip_select;
-+      bcm63xx_hsspi_set_cs(bs, dummy_cs, true);
-+
-+      list_for_each_entry(t, &msg->transfers, transfer_list) {
-+              status = bcm63xx_hsspi_do_txrx(spi, t);
-+              if (status)
-+                      break;
-+
-+              msg->actual_length += t->len;
-+
-+              if (t->delay_usecs)
-+                      udelay(t->delay_usecs);
-+
-+              if (t->cs_change)
-+                      bcm63xx_hsspi_set_cs(bs, spi->chip_select, false);
-+      }
-+
-+      mutex_lock(&bs->bus_mutex);
-+      reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      reg &= ~GLOBAL_CTRL_CS_POLARITY_MASK;
-+      reg |= bs->cs_polarity;
-+      __raw_writel(reg, bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      mutex_unlock(&bs->bus_mutex);
-+
-+      msg->status = status;
-+      spi_finalize_current_message(master);
-+
-+      return 0;
-+}
-+
-+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
-+{
-+      struct bcm63xx_hsspi *bs = (struct bcm63xx_hsspi *)dev_id;
-+
-+      if (__raw_readl(bs->regs + HSSPI_INT_STATUS_MASKED_REG) == 0)
-+              return IRQ_NONE;
-+
-+      __raw_writel(HSSPI_INT_CLEAR_ALL, bs->regs + HSSPI_INT_STATUS_REG);
-+      __raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-+
-+      complete(&bs->done);
-+
-+      return IRQ_HANDLED;
-+}
-+
-+static int bcm63xx_hsspi_probe(struct platform_device *pdev)
-+{
-+      struct spi_master *master;
-+      struct bcm63xx_hsspi *bs;
-+      struct resource *res_mem;
-+      void __iomem *regs;
-+      struct device *dev = &pdev->dev;
-+      struct clk *clk;
-+      int irq, ret;
-+      u32 reg, rate;
-+
-+      irq = platform_get_irq(pdev, 0);
-+      if (irq < 0) {
-+              dev_err(dev, "no irq\n");
-+              return -ENXIO;
-+      }
-+
-+      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      regs = devm_request_and_ioremap(dev, res_mem);
-+      if (IS_ERR(regs))
-+              return PTR_ERR(regs);
-+
-+      clk = clk_get(dev, "hsspi");
-+
-+      if (IS_ERR(clk))
-+              return PTR_ERR(clk);
-+
-+      rate = clk_get_rate(clk);
-+      if (!rate) {
-+              ret = -EINVAL;
-+              goto out_put_clk;
-+      }
-+
-+      clk_prepare_enable(clk);
-+
-+      master = spi_alloc_master(&pdev->dev, sizeof(*bs));
-+      if (!master) {
-+              ret = -ENOMEM;
-+              goto out_disable_clk;
-+      }
-+
-+      bs = spi_master_get_devdata(master);
-+      bs->pdev = pdev;
-+      bs->clk = clk;
-+      bs->regs = regs;
-+      bs->speed_hz = rate;
-+      bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
-+
-+      mutex_init(&bs->bus_mutex);
-+
-+      master->bus_num = HSSPI_BUS_NUM;
-+      master->num_chipselect = 8;
-+      master->setup = bcm63xx_hsspi_setup;
-+      master->transfer_one_message = bcm63xx_hsspi_transfer_one;
-+      master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-+      master->bits_per_word_mask = SPI_BPW_MASK(8);
-+      master->auto_runtime_pm = true;
-+
-+      platform_set_drvdata(pdev, master);
-+
-+      /* Initialize the hardware */
-+      __raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-+
-+      /* clean up any pending interrupts */
-+      __raw_writel(HSSPI_INT_CLEAR_ALL, bs->regs + HSSPI_INT_STATUS_REG);
-+
-+      /* read out default CS polarities */
-+      reg = __raw_readl(bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+      bs->cs_polarity = reg & GLOBAL_CTRL_CS_POLARITY_MASK;
-+      __raw_writel(reg | GLOBAL_CTRL_CLK_GATE_SSOFF,
-+                   bs->regs + HSSPI_GLOBAL_CTRL_REG);
-+
-+      ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED,
-+                             pdev->name, bs);
-+
-+      if (ret)
-+              goto out_put_master;
-+
-+      /* register and we are done */
-+      ret = spi_register_master(master);
-+      if (ret)
-+              goto out_put_master;
-+
-+      return 0;
-+
-+out_put_master:
-+      spi_master_put(master);
-+out_disable_clk:
-+      clk_disable_unprepare(clk);
-+out_put_clk:
-+      clk_put(clk);
-+
-+      return ret;
-+}
-+
-+
-+static int bcm63xx_hsspi_remove(struct platform_device *pdev)
-+{
-+      struct spi_master *master = platform_get_drvdata(pdev);
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      spi_unregister_master(master);
-+
-+      /* reset the hardware and block queue progress */
-+      __raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
-+      clk_disable_unprepare(bs->clk);
-+      clk_put(bs->clk);
-+
-+      return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_hsspi_suspend(struct device *dev)
-+{
-+      struct spi_master *master = dev_get_drvdata(dev);
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      spi_master_suspend(master);
-+      clk_disable(bs->clk);
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_hsspi_resume(struct device *dev)
-+{
-+      struct spi_master *master = dev_get_drvdata(dev);
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      clk_enable(bs->clk);
-+      spi_master_resume(master);
-+
-+      return 0;
-+}
-+
-+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
-+      .suspend        = bcm63xx_hsspi_suspend,
-+      .resume         = bcm63xx_hsspi_resume,
-+};
-+
-+#define BCM63XX_HSSPI_PM_OPS  (&bcm63xx_hsspi_pm_ops)
-+#else
-+#define BCM63XX_HSSPI_PM_OPS  NULL
-+#endif
-+
-+
-+
-+static struct platform_driver bcm63xx_hsspi_driver = {
-+      .driver = {
-+              .name   = "bcm63xx-hsspi",
-+              .owner  = THIS_MODULE,
-+              .pm     = BCM63XX_HSSPI_PM_OPS,
-+      },
-+      .probe          = bcm63xx_hsspi_probe,
-+      .remove         = bcm63xx_hsspi_remove,
-+};
-+
-+module_platform_driver(bcm63xx_hsspi_driver);
-+
-+MODULE_ALIAS("platform:bcm63xx_hsspi");
-+MODULE_DESCRIPTION("Broadcom BCM63xx High Speed SPI Controller driver");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.13/002-MIPS-BCM63XX-expose-the-HSSPI-clock.patch b/target/linux/brcm63xx/patches-3.13/002-MIPS-BCM63XX-expose-the-HSSPI-clock.patch
deleted file mode 100644 (file)
index 38aa69a..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-From f0df10fb498c21bbb201bc81dd209ea646b5a311 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:19:09 +0100
-Subject: [PATCH 1/5] MIPS: BCM63XX: expose the HSSPI clock
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -226,6 +226,28 @@ static struct clk clk_spi = {
- };
- /*
-+ * HSSPI clock
-+ */
-+static void hsspi_set(struct clk *clk, int enable)
-+{
-+      u32 mask;
-+
-+      if (BCMCPU_IS_6328())
-+              mask = CKCTL_6328_HSSPI_EN;
-+      else if (BCMCPU_IS_6362())
-+              mask = CKCTL_6362_HSSPI_EN;
-+      else
-+              return;
-+
-+      bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_hsspi = {
-+      .set    = hsspi_set,
-+};
-+
-+
-+/*
-  * XTM clock
-  */
- static void xtm_set(struct clk *clk, int enable)
-@@ -346,6 +368,8 @@ struct clk *clk_get(struct device *dev,
-               return &clk_usbd;
-       if (!strcmp(id, "spi"))
-               return &clk_spi;
-+      if (!strcmp(id, "hsspi"))
-+              return &clk_hsspi;
-       if (!strcmp(id, "xtm"))
-               return &clk_xtm;
-       if (!strcmp(id, "periph"))
diff --git a/target/linux/brcm63xx/patches-3.13/003-MIPS-BCM63XX-setup-the-HSSPI-clock-rate.patch b/target/linux/brcm63xx/patches-3.13/003-MIPS-BCM63XX-setup-the-HSSPI-clock-rate.patch
deleted file mode 100644 (file)
index c08bf00..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From c8b7d2630d907025ce30989bddd01f4f0f13c103 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 20 Nov 2013 17:22:40 +0100
-Subject: [PATCH 2/5] MIPS: BCM63XX: setup the HSSPI clock rate
-
-Properly set up the HSSPI clock rate depending on the SoC's PLL rate.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -390,3 +390,21 @@ void clk_put(struct clk *clk)
- }
- EXPORT_SYMBOL(clk_put);
-+
-+#define HSSPI_PLL_HZ_6328     133333333
-+#define HSSPI_PLL_HZ_6362     400000000
-+
-+static int __init bcm63xx_clk_init(void)
-+{
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM6328_CPU_ID:
-+              clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-+              break;
-+      case BCM6362_CPU_ID:
-+              clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-+              break;
-+      }
-+
-+      return 0;
-+}
-+arch_initcall(bcm63xx_clk_init);
diff --git a/target/linux/brcm63xx/patches-3.13/004-MIPS-BCM63XX-add-HSSPI-IRQ-and-register-offsets.patch b/target/linux/brcm63xx/patches-3.13/004-MIPS-BCM63XX-add-HSSPI-IRQ-and-register-offsets.patch
deleted file mode 100644 (file)
index 7bd98c1..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From 33a6acbe47636adcd9062a0e0af7985c0df9faa5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 3/5] MIPS: BCM63XX: add HSSPI IRQ and register offsets
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -145,6 +145,7 @@ enum bcm63xx_regs_set {
-       RSET_UART1,
-       RSET_GPIO,
-       RSET_SPI,
-+      RSET_HSSPI,
-       RSET_UDC0,
-       RSET_OHCI0,
-       RSET_OHCI_PRIV,
-@@ -193,6 +194,7 @@ enum bcm63xx_regs_set {
- #define RSET_ENETDMAS_SIZE(chans)     (16 * (chans))
- #define RSET_ENETSW_SIZE              65536
- #define RSET_UART_SIZE                        24
-+#define RSET_HSSPI_SIZE                       1536
- #define RSET_UDC_SIZE                 256
- #define RSET_OHCI_SIZE                        256
- #define RSET_EHCI_SIZE                        256
-@@ -265,6 +267,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_UART1_BASE           (0xb0000120)
- #define BCM_6328_GPIO_BASE            (0xb0000080)
- #define BCM_6328_SPI_BASE             (0xdeadbeef)
-+#define BCM_6328_HSSPI_BASE           (0xb0001000)
- #define BCM_6328_UDC0_BASE            (0xdeadbeef)
- #define BCM_6328_USBDMA_BASE          (0xb000c000)
- #define BCM_6328_OHCI0_BASE           (0xb0002600)
-@@ -313,6 +316,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE           (0xdeadbeef)
- #define BCM_6338_GPIO_BASE            (0xfffe0400)
- #define BCM_6338_SPI_BASE             (0xfffe0c00)
-+#define BCM_6338_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6338_UDC0_BASE            (0xdeadbeef)
- #define BCM_6338_USBDMA_BASE          (0xfffe2400)
- #define BCM_6338_OHCI0_BASE           (0xdeadbeef)
-@@ -360,6 +364,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE           (0xdeadbeef)
- #define BCM_6345_GPIO_BASE            (0xfffe0400)
- #define BCM_6345_SPI_BASE             (0xdeadbeef)
-+#define BCM_6345_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6345_UDC0_BASE            (0xdeadbeef)
- #define BCM_6345_USBDMA_BASE          (0xfffe2800)
- #define BCM_6345_ENET0_BASE           (0xfffe1800)
-@@ -406,6 +411,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_UART1_BASE           (0xdeadbeef)
- #define BCM_6348_GPIO_BASE            (0xfffe0400)
- #define BCM_6348_SPI_BASE             (0xfffe0c00)
-+#define BCM_6348_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6348_UDC0_BASE            (0xfffe1000)
- #define BCM_6348_USBDMA_BASE          (0xdeadbeef)
- #define BCM_6348_OHCI0_BASE           (0xfffe1b00)
-@@ -451,6 +457,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE           (0xfffe0120)
- #define BCM_6358_GPIO_BASE            (0xfffe0080)
- #define BCM_6358_SPI_BASE             (0xfffe0800)
-+#define BCM_6358_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6358_UDC0_BASE            (0xfffe0800)
- #define BCM_6358_USBDMA_BASE          (0xdeadbeef)
- #define BCM_6358_OHCI0_BASE           (0xfffe1400)
-@@ -553,6 +560,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_UART1_BASE           (0xb0000120)
- #define BCM_6368_GPIO_BASE            (0xb0000080)
- #define BCM_6368_SPI_BASE             (0xb0000800)
-+#define BCM_6368_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6368_UDC0_BASE            (0xdeadbeef)
- #define BCM_6368_USBDMA_BASE          (0xb0004800)
- #define BCM_6368_OHCI0_BASE           (0xb0001600)
-@@ -604,6 +612,7 @@ extern const unsigned long *bcm63xx_regs
-       __GEN_RSET_BASE(__cpu, UART1)                                   \
-       __GEN_RSET_BASE(__cpu, GPIO)                                    \
-       __GEN_RSET_BASE(__cpu, SPI)                                     \
-+      __GEN_RSET_BASE(__cpu, HSSPI)                                   \
-       __GEN_RSET_BASE(__cpu, UDC0)                                    \
-       __GEN_RSET_BASE(__cpu, OHCI0)                                   \
-       __GEN_RSET_BASE(__cpu, OHCI_PRIV)                               \
-@@ -647,6 +656,7 @@ extern const unsigned long *bcm63xx_regs
-       [RSET_UART1]            = BCM_## __cpu ##_UART1_BASE,           \
-       [RSET_GPIO]             = BCM_## __cpu ##_GPIO_BASE,            \
-       [RSET_SPI]              = BCM_## __cpu ##_SPI_BASE,             \
-+      [RSET_HSSPI]            = BCM_## __cpu ##_HSSPI_BASE,           \
-       [RSET_UDC0]             = BCM_## __cpu ##_UDC0_BASE,            \
-       [RSET_OHCI0]            = BCM_## __cpu ##_OHCI0_BASE,           \
-       [RSET_OHCI_PRIV]        = BCM_## __cpu ##_OHCI_PRIV_BASE,       \
-@@ -727,6 +737,7 @@ enum bcm63xx_irq {
-       IRQ_ENET0,
-       IRQ_ENET1,
-       IRQ_ENET_PHY,
-+      IRQ_HSSPI,
-       IRQ_OHCI0,
-       IRQ_EHCI0,
-       IRQ_USBD,
-@@ -815,6 +826,7 @@ enum bcm63xx_irq {
- #define BCM_6328_ENET0_IRQ            0
- #define BCM_6328_ENET1_IRQ            0
- #define BCM_6328_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6328_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
- #define BCM_6328_OHCI0_IRQ            (BCM_6328_HIGH_IRQ_BASE + 9)
- #define BCM_6328_EHCI0_IRQ            (BCM_6328_HIGH_IRQ_BASE + 10)
- #define BCM_6328_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-@@ -860,6 +872,7 @@ enum bcm63xx_irq {
- #define BCM_6338_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6338_ENET1_IRQ            0
- #define BCM_6338_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6338_HSSPI_IRQ            0
- #define BCM_6338_OHCI0_IRQ            0
- #define BCM_6338_EHCI0_IRQ            0
- #define BCM_6338_USBD_IRQ             0
-@@ -898,6 +911,7 @@ enum bcm63xx_irq {
- #define BCM_6345_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET1_IRQ            0
- #define BCM_6345_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6345_HSSPI_IRQ            0
- #define BCM_6345_OHCI0_IRQ            0
- #define BCM_6345_EHCI0_IRQ            0
- #define BCM_6345_USBD_IRQ             0
-@@ -936,6 +950,7 @@ enum bcm63xx_irq {
- #define BCM_6348_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET1_IRQ            (IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6348_HSSPI_IRQ            0
- #define BCM_6348_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 12)
- #define BCM_6348_EHCI0_IRQ            0
- #define BCM_6348_USBD_IRQ             0
-@@ -974,6 +989,7 @@ enum bcm63xx_irq {
- #define BCM_6358_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6358_ENET1_IRQ            (IRQ_INTERNAL_BASE + 6)
- #define BCM_6358_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6358_HSSPI_IRQ            0
- #define BCM_6358_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 5)
- #define BCM_6358_EHCI0_IRQ            (IRQ_INTERNAL_BASE + 10)
- #define BCM_6358_USBD_IRQ             0
-@@ -1086,6 +1102,7 @@ enum bcm63xx_irq {
- #define BCM_6368_ENET0_IRQ            0
- #define BCM_6368_ENET1_IRQ            0
- #define BCM_6368_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6368_HSSPI_IRQ            0
- #define BCM_6368_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 5)
- #define BCM_6368_EHCI0_IRQ            (IRQ_INTERNAL_BASE + 7)
- #define BCM_6368_USBD_IRQ             (IRQ_INTERNAL_BASE + 8)
-@@ -1133,6 +1150,7 @@ extern const int *bcm63xx_irqs;
-       [IRQ_ENET0]             = BCM_## __cpu ##_ENET0_IRQ,            \
-       [IRQ_ENET1]             = BCM_## __cpu ##_ENET1_IRQ,            \
-       [IRQ_ENET_PHY]          = BCM_## __cpu ##_ENET_PHY_IRQ,         \
-+      [IRQ_HSSPI]             = BCM_## __cpu ##_HSSPI_IRQ,            \
-       [IRQ_OHCI0]             = BCM_## __cpu ##_OHCI0_IRQ,            \
-       [IRQ_EHCI0]             = BCM_## __cpu ##_EHCI0_IRQ,            \
-       [IRQ_USBD]              = BCM_## __cpu ##_USBD_IRQ,             \
diff --git a/target/linux/brcm63xx/patches-3.13/005-MIPS-BCM63XX-add-HSSPI-platform-device-and-register-.patch b/target/linux/brcm63xx/patches-3.13/005-MIPS-BCM63XX-add-HSSPI-platform-device-and-register-.patch
deleted file mode 100644 (file)
index b20cf2c..0000000
+++ /dev/null
@@ -1,107 +0,0 @@
-From ad04c99347cf9e583457f7258e97f0be22fad2ec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 Nov 2011 12:18:26 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: add HSSPI platform device and register it
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  4 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |  3 ++
- arch/mips/bcm63xx/dev-hsspi.c                      | 47 ++++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |  8 ++++
- 4 files changed, 60 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-hsspi.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
--                 dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o
-+                 dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-+                 dev-wdt.o dev-usb-usbd.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -23,6 +23,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -915,6 +916,8 @@ int __init board_register_devices(void)
-       bcm63xx_spi_register();
-+      bcm63xx_hsspi_register();
-+
-       bcm63xx_flash_register();
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -0,0 +1,47 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_regs.h>
-+
-+static struct resource spi_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static struct platform_device bcm63xx_hsspi_device = {
-+      .name           = "bcm63xx-hsspi",
-+      .id             = 0,
-+      .num_resources  = ARRAY_SIZE(spi_resources),
-+      .resource       = spi_resources,
-+};
-+
-+int __init bcm63xx_hsspi_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+              return -ENODEV;
-+
-+      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
-+      spi_resources[0].end = spi_resources[0].start;
-+      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
-+      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
-+
-+      return platform_device_register(&bcm63xx_hsspi_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -0,0 +1,8 @@
-+#ifndef BCM63XX_DEV_HSSPI_H
-+#define BCM63XX_DEV_HSSPI_H
-+
-+#include <linux/types.h>
-+
-+int bcm63xx_hsspi_register(void);
-+
-+#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/brcm63xx/patches-3.13/006-spi-bcm63xx-don-t-reject-reads-256-bytes.patch b/target/linux/brcm63xx/patches-3.13/006-spi-bcm63xx-don-t-reject-reads-256-bytes.patch
deleted file mode 100644 (file)
index 60abbda..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From 4d8fa9d3d1fe1d70fe7d59537acf49797f6010a1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 1 Dec 2013 16:19:46 +0100
-Subject: [PATCH 2/2] spi/bcm63xx: don't reject reads >= 256 bytes
-
-The rx_tail register is only 8 bit wide, so it will wrap around
-after 256 read bytes. This makes it rather meaningless, so drop any
-usage of it to not treat reads over 256 as failed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -205,13 +205,7 @@ static int bcm63xx_txrx_bufs(struct spi_
-       if (!timeout)
-               return -ETIMEDOUT;
--      /* read out all data */
--      rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
--
--      if (do_rx && rx_tail != len)
--              return -EIO;
--
--      if (!rx_tail)
-+      if (!do_rx)
-               return 0;
-       len = 0;
diff --git a/target/linux/brcm63xx/patches-3.13/007-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch b/target/linux/brcm63xx/patches-3.13/007-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch
deleted file mode 100644 (file)
index b50f0b8..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 8bd8f46cbc709974b26396aa440133db4484015e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 28 Jun 2013 00:25:13 +0200
-Subject: [PATCH V2 01/13] MIPS: BCM63XX: disable SMP also on BCM3368
-
-BCM3368 has the same shared TLB as BCM6358.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/prom.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -64,9 +64,9 @@ void __init prom_init(void)
-               register_smp_ops(&bmips_smp_ops);
-               /*
--               * BCM6328 might not have its second CPU enabled, while BCM6358
--               * needs special handling for its shared TLB, so disable SMP
--               * for now.
-+               * BCM6328 might not have its second CPU enabled, while BCM3368
-+               * and BCM6358 need special handling for their shared TLB, so
-+               * disable SMP for now.
-                */
-               if (BCMCPU_IS_6328()) {
-                       reg = bcm_readl(BCM_6328_OTP_BASE +
-@@ -74,7 +74,7 @@ void __init prom_init(void)
-                       if (reg & OTP_6328_REG3_TP1_DISABLED)
-                               bmips_smp_enabled = 0;
--              } else if (BCMCPU_IS_6358()) {
-+              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-                       bmips_smp_enabled = 0;
-               }
diff --git a/target/linux/brcm63xx/patches-3.13/008-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch b/target/linux/brcm63xx/patches-3.13/008-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch
deleted file mode 100644 (file)
index 92b7f98..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From 72a1c3ad0392d7b42bf50e6ecade63a775166c73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 27 Jun 2013 21:32:41 +0200
-Subject: [PATCH V2 02/13] MIPS: allow asm/cpu.h to be included from assembly
-
-Add guards around the enum to allow including cpu.h from assembly.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/cpu.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/include/asm/cpu.h
-+++ b/arch/mips/include/asm/cpu.h
-@@ -249,6 +249,8 @@
- #define FPIR_IMP_NONE         0x0000
-+#if !defined(__ASSEMBLY__)
-+
- enum cpu_type_enum {
-       CPU_UNKNOWN,
-@@ -301,6 +303,7 @@ enum cpu_type_enum {
-       CPU_LAST
- };
-+#endif /* !__ASSEMBLY */
- /*
-  * ISA Level encodings
diff --git a/target/linux/brcm63xx/patches-3.13/009-MIPS-BMIPS-change-compile-time-checks-to-runtime-che.patch b/target/linux/brcm63xx/patches-3.13/009-MIPS-BMIPS-change-compile-time-checks-to-runtime-che.patch
deleted file mode 100644 (file)
index 2f56f15..0000000
+++ /dev/null
@@ -1,602 +0,0 @@
-From 7d790bd6cab314462a29ba194e243b8b1d529524 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 27 Jun 2013 21:33:56 +0200
-Subject: [PATCH V2 03/13] MIPS: BMIPS: change compile time checks to runtime
- checks
-
-Allow building for all bmips cpus at the same time by changing ifdefs
-to checks for the cpu type, or adding appropriate checks to the
-assembly.
-
-Since BMIPS43XX and BMIPS5000 require different IPI implementations,
-split the SMP ops into one for each, so the runtime overhead is only
-at registration time for them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
-  * use switch (cpu_type()) instead of if () else if () ...
-  * split the smp ops into bmips43xx and bmips5000
-
- arch/mips/bcm63xx/prom.c      |   2 +-
- arch/mips/include/asm/bmips.h |   3 +-
- arch/mips/kernel/bmips_vec.S  |  55 ++++++--
- arch/mips/kernel/smp-bmips.c  | 312 +++++++++++++++++++++++++-----------------
- 4 files changed, 235 insertions(+), 137 deletions(-)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -61,7 +61,7 @@ void __init prom_init(void)
-       if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
-               /* set up SMP */
--              register_smp_ops(&bmips_smp_ops);
-+              register_smp_ops(&bmips43xx_smp_ops);
-               /*
-                * BCM6328 might not have its second CPU enabled, while BCM3368
---- a/arch/mips/include/asm/bmips.h
-+++ b/arch/mips/include/asm/bmips.h
-@@ -47,7 +47,8 @@
- #include <linux/cpumask.h>
- #include <asm/r4kcache.h>
--extern struct plat_smp_ops bmips_smp_ops;
-+extern struct plat_smp_ops bmips43xx_smp_ops;
-+extern struct plat_smp_ops bmips5000_smp_ops;
- extern char bmips_reset_nmi_vec;
- extern char bmips_reset_nmi_vec_end;
- extern char bmips_smp_movevec;
---- a/arch/mips/kernel/bmips_vec.S
-+++ b/arch/mips/kernel/bmips_vec.S
-@@ -13,6 +13,7 @@
- #include <asm/asm.h>
- #include <asm/asmmacro.h>
- #include <asm/cacheops.h>
-+#include <asm/cpu.h>
- #include <asm/regdef.h>
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
-@@ -91,12 +92,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
-       beqz    k0, bmips_smp_entry
- #if defined(CONFIG_CPU_BMIPS5000)
-+      mfc0    k0, CP0_PRID
-+      li      k1, PRID_IMP_BMIPS5000
-+      andi    k0, 0xff00
-+      bne     k0, k1, 1f
-+
-       /* if we're not on core 0, this must be the SMP boot signal */
-       li      k1, (3 << 25)
-       mfc0    k0, $22
-       and     k0, k1
-       bnez    k0, bmips_smp_entry
--#endif
-+1:
-+#endif /* CONFIG_CPU_BMIPS5000 */
- #endif /* CONFIG_SMP */
-       /* nope, it's just a regular NMI */
-@@ -139,7 +146,12 @@ bmips_smp_entry:
-       xori    k0, 0x04
-       mtc0    k0, CP0_CONFIG
-+      mfc0    k0, CP0_PRID
-+      andi    k0, 0xff00
- #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
-+      li      k1, PRID_IMP_BMIPS43XX
-+      bne     k0, k1, 2f
-+
-       /* initialize CPU1's local I-cache */
-       li      k0, 0x80000000
-       li      k1, 0x80010000
-@@ -150,14 +162,21 @@ bmips_smp_entry:
- 1:    cache   Index_Store_Tag_I, 0(k0)
-       addiu   k0, 16
-       bne     k0, k1, 1b
--#elif defined(CONFIG_CPU_BMIPS5000)
-+
-+      b       3f
-+2:
-+#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
-+#if defined(CONFIG_CPU_BMIPS5000)
-       /* set exception vector base */
-+      li      k1, PRID_IMP_BMIPS5000
-+      bne     k0, k1, 3f
-+
-       la      k0, ebase
-       lw      k0, 0(k0)
-       mtc0    k0, $15, 1
-       BARRIER
--#endif
--
-+#endif /* CONFIG_CPU_BMIPS5000 */
-+3:
-       /* jump back to kseg0 in case we need to remap the kseg1 area */
-       la      k0, 1f
-       jr      k0
-@@ -221,8 +240,18 @@ END(bmips_smp_int_vec)
- LEAF(bmips_enable_xks01)
- #if defined(CONFIG_XKS01)
--
-+      mfc0    t0, CP0_PRID
-+      andi    t2, t0, 0xff00
- #if defined(CONFIG_CPU_BMIPS4380)
-+      li      t1, PRID_IMP_BMIPS43XX
-+      bne     t2, t1, 1f
-+
-+      andi    t0, 0xff
-+      addiu   t1, t0, -PRID_REV_BMIPS4380_HI
-+      bgtz    t1, 2f
-+      addiu   t0, -PRID_REV_BMIPS4380_LO
-+      bltz    t0, 2f
-+
-       mfc0    t0, $22, 3
-       li      t1, 0x1ff0
-       li      t2, (1 << 12) | (1 << 9)
-@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01)
-       or      t0, t2
-       mtc0    t0, $22, 3
-       BARRIER
--#elif defined(CONFIG_CPU_BMIPS5000)
-+      b       2f
-+1:
-+#endif /* CONFIG_CPU_BMIPS4380 */
-+#if defined(CONFIG_CPU_BMIPS5000)
-+      li      t1, PRID_IMP_BMIPS5000
-+      bne     t2, t1, 2f
-+
-       mfc0    t0, $22, 5
-       li      t1, 0x01ff
-       li      t2, (1 << 8) | (1 << 5)
-@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01)
-       or      t0, t2
-       mtc0    t0, $22, 5
-       BARRIER
--#else
--
--#error Missing XKS01 setup
--
--#endif
--
-+#endif /* CONFIG_CPU_BMIPS5000 */
-+2:
- #endif /* defined(CONFIG_XKS01) */
-       jr      ra
---- a/arch/mips/kernel/smp-bmips.c
-+++ b/arch/mips/kernel/smp-bmips.c
-@@ -49,8 +49,10 @@ cpumask_t bmips_booted_mask;
- unsigned long bmips_smp_boot_sp;
- unsigned long bmips_smp_boot_gp;
--static void bmips_send_ipi_single(int cpu, unsigned int action);
--static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
-+static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
-+static void bmips5000_send_ipi_single(int cpu, unsigned int action);
-+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
-+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
- /* SW interrupts 0,1 are used for interprocessor signaling */
- #define IPI0_IRQ                      (MIPS_CPU_IRQ_BASE + 0)
-@@ -64,49 +66,58 @@ static irqreturn_t bmips_ipi_interrupt(i
- static void __init bmips_smp_setup(void)
- {
-       int i, cpu = 1, boot_cpu = 0;
--
--#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
-       int cpu_hw_intr;
--      /* arbitration priority */
--      clear_c0_brcm_cmt_ctrl(0x30);
--
--      /* NBK and weak order flags */
--      set_c0_brcm_config_0(0x30000);
--
--      /* Find out if we are running on TP0 or TP1 */
--      boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
--
--      /*
--       * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
--       * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
--       * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
--       */
--      if (boot_cpu == 0)
--              cpu_hw_intr = 0x02;
--      else
--              cpu_hw_intr = 0x1d;
--
--      change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
--
--      /* single core, 2 threads (2 pipelines) */
--      max_cpus = 2;
--#elif defined(CONFIG_CPU_BMIPS5000)
--      /* enable raceless SW interrupts */
--      set_c0_brcm_config(0x03 << 22);
--
--      /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
--      change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
--
--      /* N cores, 2 threads per core */
--      max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
-+      switch (current_cpu_type()) {
-+      case CPU_BMIPS4350:
-+      case CPU_BMIPS4380:
-+              /* arbitration priority */
-+              clear_c0_brcm_cmt_ctrl(0x30);
-+
-+              /* NBK and weak order flags */
-+              set_c0_brcm_config_0(0x30000);
-+
-+              /* Find out if we are running on TP0 or TP1 */
-+              boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
-+
-+              /*
-+               * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
-+               * thread
-+               * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
-+               * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
-+               */
-+              if (boot_cpu == 0)
-+                      cpu_hw_intr = 0x02;
-+              else
-+                      cpu_hw_intr = 0x1d;
-+
-+              change_c0_brcm_cmt_intr(0xf8018000,
-+                                      (cpu_hw_intr << 27) | (0x03 << 15));
-+
-+              /* single core, 2 threads (2 pipelines) */
-+              max_cpus = 2;
-+
-+              break;
-+      case CPU_BMIPS5000:
-+              /* enable raceless SW interrupts */
-+              set_c0_brcm_config(0x03 << 22);
-+
-+              /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
-+              change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
-+
-+              /* N cores, 2 threads per core */
-+              max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
-+
-+              /* clear any pending SW interrupts */
-+              for (i = 0; i < max_cpus; i++) {
-+                      write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
-+                      write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
-+              }
--      /* clear any pending SW interrupts */
--      for (i = 0; i < max_cpus; i++) {
--              write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
--              write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
-+              break;
-+      default:
-+              max_cpus = 1;
-       }
--#endif
-       if (!bmips_smp_enabled)
-               max_cpus = 1;
-@@ -134,6 +145,20 @@ static void __init bmips_smp_setup(void)
-  */
- static void bmips_prepare_cpus(unsigned int max_cpus)
- {
-+      irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
-+
-+      switch (current_cpu_type()) {
-+      case CPU_BMIPS4350:
-+      case CPU_BMIPS4380:
-+              bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
-+              break;
-+      case CPU_BMIPS5000:
-+              bmips_ipi_interrupt = bmips5000_ipi_interrupt;
-+              break;
-+      default:
-+              return;
-+      }
-+
-       if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
-                       "smp_ipi0", NULL))
-               panic("Can't request IPI0 interrupt");
-@@ -168,26 +193,39 @@ static void bmips_boot_secondary(int cpu
-       pr_info("SMP: Booting CPU%d...\n", cpu);
--      if (cpumask_test_cpu(cpu, &bmips_booted_mask))
--              bmips_send_ipi_single(cpu, 0);
-+      if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
-+              switch (current_cpu_type()) {
-+              case CPU_BMIPS4350:
-+              case CPU_BMIPS4380:
-+                      bmips43xx_send_ipi_single(cpu, 0);
-+                      break;
-+              case CPU_BMIPS5000:
-+                      bmips5000_send_ipi_single(cpu, 0);
-+                      break;
-+              }
-+      }
-       else {
--#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
--              /* Reset slave TP1 if booting from TP0 */
--              if (cpu_logical_map(cpu) == 1)
--                      set_c0_brcm_cmt_ctrl(0x01);
--#elif defined(CONFIG_CPU_BMIPS5000)
--              if (cpu & 0x01)
--                      write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
--              else {
--                      /*
--                       * core N thread 0 was already booted; just
--                       * pulse the NMI line
--                       */
--                      bmips_write_zscm_reg(0x210, 0xc0000000);
--                      udelay(10);
--                      bmips_write_zscm_reg(0x210, 0x00);
-+              switch (current_cpu_type()) {
-+              case CPU_BMIPS4350:
-+              case CPU_BMIPS4380:
-+                      /* Reset slave TP1 if booting from TP0 */
-+                      if (cpu_logical_map(cpu) == 1)
-+                              set_c0_brcm_cmt_ctrl(0x01);
-+                      break;
-+              case CPU_BMIPS5000:
-+                      if (cpu & 0x01)
-+                              write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
-+                      else {
-+                              /*
-+                               * core N thread 0 was already booted; just
-+                               * pulse the NMI line
-+                               */
-+                              bmips_write_zscm_reg(0x210, 0xc0000000);
-+                              udelay(10);
-+                              bmips_write_zscm_reg(0x210, 0x00);
-+                      }
-+                      break;
-               }
--#endif
-               cpumask_set_cpu(cpu, &bmips_booted_mask);
-       }
- }
-@@ -199,26 +237,32 @@ static void bmips_init_secondary(void)
- {
-       /* move NMI vector to kseg0, in case XKS01 is enabled */
--#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
--      void __iomem *cbr = BMIPS_GET_CBR();
-+      void __iomem *cbr;
-       unsigned long old_vec;
-       unsigned long relo_vector;
-       int boot_cpu;
--      boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
--      relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
--                        BMIPS_RELO_VECTOR_CONTROL_1;
--
--      old_vec = __raw_readl(cbr + relo_vector);
--      __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
--
--      clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
--#elif defined(CONFIG_CPU_BMIPS5000)
--      write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
--              (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
-+      switch (current_cpu_type()) {
-+      case CPU_BMIPS4350:
-+      case CPU_BMIPS4380:
-+              cbr = BMIPS_GET_CBR();
-+
-+              boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
-+              relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
-+                                BMIPS_RELO_VECTOR_CONTROL_1;
-+
-+              old_vec = __raw_readl(cbr + relo_vector);
-+              __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
-+
-+              clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
-+              break;
-+      case CPU_BMIPS5000:
-+              write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
-+                      (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
--      write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
--#endif
-+              write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
-+              break;
-+      }
- }
- /*
-@@ -243,8 +287,6 @@ static void bmips_cpus_done(void)
- {
- }
--#if defined(CONFIG_CPU_BMIPS5000)
--
- /*
-  * BMIPS5000 raceless IPIs
-  *
-@@ -253,12 +295,12 @@ static void bmips_cpus_done(void)
-  * IPI1 is used for SMP_CALL_FUNCTION
-  */
--static void bmips_send_ipi_single(int cpu, unsigned int action)
-+static void bmips5000_send_ipi_single(int cpu, unsigned int action)
- {
-       write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
- }
--static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
-+static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
- {
-       int action = irq - IPI0_IRQ;
-@@ -272,7 +314,14 @@ static irqreturn_t bmips_ipi_interrupt(i
-       return IRQ_HANDLED;
- }
--#else
-+static void bmips5000_send_ipi_mask(const struct cpumask *mask,
-+      unsigned int action)
-+{
-+      unsigned int i;
-+
-+      for_each_cpu(i, mask)
-+              bmips5000_send_ipi_single(i, action);
-+}
- /*
-  * BMIPS43xx racey IPIs
-@@ -287,7 +336,7 @@ static irqreturn_t bmips_ipi_interrupt(i
- static DEFINE_SPINLOCK(ipi_lock);
- static DEFINE_PER_CPU(int, ipi_action_mask);
--static void bmips_send_ipi_single(int cpu, unsigned int action)
-+static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
- {
-       unsigned long flags;
-@@ -298,7 +347,7 @@ static void bmips_send_ipi_single(int cp
-       spin_unlock_irqrestore(&ipi_lock, flags);
- }
--static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
-+static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
- {
-       unsigned long flags;
-       int action, cpu = irq - IPI0_IRQ;
-@@ -317,15 +366,13 @@ static irqreturn_t bmips_ipi_interrupt(i
-       return IRQ_HANDLED;
- }
--#endif /* BMIPS type */
--
--static void bmips_send_ipi_mask(const struct cpumask *mask,
-+static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
-       unsigned int action)
- {
-       unsigned int i;
-       for_each_cpu(i, mask)
--              bmips_send_ipi_single(i, action);
-+              bmips43xx_send_ipi_single(i, action);
- }
- #ifdef CONFIG_HOTPLUG_CPU
-@@ -381,15 +428,30 @@ void __ref play_dead(void)
- #endif /* CONFIG_HOTPLUG_CPU */
--struct plat_smp_ops bmips_smp_ops = {
-+struct plat_smp_ops bmips43xx_smp_ops = {
-+      .smp_setup              = bmips_smp_setup,
-+      .prepare_cpus           = bmips_prepare_cpus,
-+      .boot_secondary         = bmips_boot_secondary,
-+      .smp_finish             = bmips_smp_finish,
-+      .init_secondary         = bmips_init_secondary,
-+      .cpus_done              = bmips_cpus_done,
-+      .send_ipi_single        = bmips43xx_send_ipi_single,
-+      .send_ipi_mask          = bmips43xx_send_ipi_mask,
-+#ifdef CONFIG_HOTPLUG_CPU
-+      .cpu_disable            = bmips_cpu_disable,
-+      .cpu_die                = bmips_cpu_die,
-+#endif
-+};
-+
-+struct plat_smp_ops bmips5000_smp_ops = {
-       .smp_setup              = bmips_smp_setup,
-       .prepare_cpus           = bmips_prepare_cpus,
-       .boot_secondary         = bmips_boot_secondary,
-       .smp_finish             = bmips_smp_finish,
-       .init_secondary         = bmips_init_secondary,
-       .cpus_done              = bmips_cpus_done,
--      .send_ipi_single        = bmips_send_ipi_single,
--      .send_ipi_mask          = bmips_send_ipi_mask,
-+      .send_ipi_single        = bmips5000_send_ipi_single,
-+      .send_ipi_mask          = bmips5000_send_ipi_mask,
- #ifdef CONFIG_HOTPLUG_CPU
-       .cpu_disable            = bmips_cpu_disable,
-       .cpu_die                = bmips_cpu_die,
-@@ -427,43 +489,47 @@ void bmips_ebase_setup(void)
-       BUG_ON(ebase != CKSEG0);
--#if defined(CONFIG_CPU_BMIPS4350)
--      /*
--       * BMIPS4350 cannot relocate the normal vectors, but it
--       * can relocate the BEV=1 vectors.  So CPU1 starts up at
--       * the relocated BEV=1, IV=0 general exception vector @
--       * 0xa000_0380.
--       *
--       * set_uncached_handler() is used here because:
--       *  - CPU1 will run this from uncached space
--       *  - None of the cacheflush functions are set up yet
--       */
--      set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
--              &bmips_smp_int_vec, 0x80);
--      __sync();
--      return;
--#elif defined(CONFIG_CPU_BMIPS4380)
--      /*
--       * 0x8000_0000: reset/NMI (initially in kseg1)
--       * 0x8000_0400: normal vectors
--       */
--      new_ebase = 0x80000400;
--      cbr = BMIPS_GET_CBR();
--      __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
--      __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
--#elif defined(CONFIG_CPU_BMIPS5000)
--      /*
--       * 0x8000_0000: reset/NMI (initially in kseg1)
--       * 0x8000_1000: normal vectors
--       */
--      new_ebase = 0x80001000;
--      write_c0_brcm_bootvec(0xa0088008);
--      write_c0_ebase(new_ebase);
--      if (max_cpus > 2)
--              bmips_write_zscm_reg(0xa0, 0xa008a008);
--#else
--      return;
--#endif
-+      switch (current_cpu_type()) {
-+      case CPU_BMIPS4350:
-+              /*
-+               * BMIPS4350 cannot relocate the normal vectors, but it
-+               * can relocate the BEV=1 vectors.  So CPU1 starts up at
-+               * the relocated BEV=1, IV=0 general exception vector @
-+               * 0xa000_0380.
-+               *
-+               * set_uncached_handler() is used here because:
-+               *  - CPU1 will run this from uncached space
-+               *  - None of the cacheflush functions are set up yet
-+               */
-+              set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
-+                      &bmips_smp_int_vec, 0x80);
-+              __sync();
-+              return;
-+      case CPU_BMIPS4380:
-+              /*
-+               * 0x8000_0000: reset/NMI (initially in kseg1)
-+               * 0x8000_0400: normal vectors
-+               */
-+              new_ebase = 0x80000400;
-+              cbr = BMIPS_GET_CBR();
-+              __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
-+              __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
-+              break;
-+      case CPU_BMIPS5000:
-+              /*
-+               * 0x8000_0000: reset/NMI (initially in kseg1)
-+               * 0x8000_1000: normal vectors
-+               */
-+              new_ebase = 0x80001000;
-+              write_c0_brcm_bootvec(0xa0088008);
-+              write_c0_ebase(new_ebase);
-+              if (max_cpus > 2)
-+                      bmips_write_zscm_reg(0xa0, 0xa008a008);
-+              break;
-+      default:
-+              return;
-+      }
-+
-       board_nmi_handler_setup = &bmips_nmi_handler_setup;
-       ebase = new_ebase;
- }
diff --git a/target/linux/brcm63xx/patches-3.13/010-MIPS-BMIPS-merge-CPU-options-into-one-option.patch b/target/linux/brcm63xx/patches-3.13/010-MIPS-BMIPS-merge-CPU-options-into-one-option.patch
deleted file mode 100644 (file)
index 0bf6db8..0000000
+++ /dev/null
@@ -1,137 +0,0 @@
-From 81d6f5e024884ce904b7bd36fec60291d751df48 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 27 Jun 2013 23:57:20 +0200
-Subject: [PATCH V2 04/13] MIPS: BMIPS: merge CPU options into one option
-
-Instead of treating each flavour as an exclusive CPU to select, make
-BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which
-flavours to include support.
-
-Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380
-and BMIPS5000.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
- * Let the SYS_HAS_CPU_BMIPS* symbols select SYS_HAS_CPU_BMIPS instead of
-   requiring users to select it
-
- arch/mips/Kconfig | 80 +++++++++++++++++++++++++++----------------------------
- 1 file changed, 39 insertions(+), 41 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1396,41 +1396,21 @@ config CPU_CAVIUM_OCTEON
-         can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
-         Full details can be found at http://www.caviumnetworks.com.
--config CPU_BMIPS3300
--      bool "BMIPS3300"
--      depends on SYS_HAS_CPU_BMIPS3300
--      select CPU_BMIPS
--      help
--        Broadcom BMIPS3300 processors.
--
--config CPU_BMIPS4350
--      bool "BMIPS4350"
--      depends on SYS_HAS_CPU_BMIPS4350
--      select CPU_BMIPS
--      select SYS_SUPPORTS_SMP
--      select SYS_SUPPORTS_HOTPLUG_CPU
--      help
--        Broadcom BMIPS4350 ("VIPER") processors.
--
--config CPU_BMIPS4380
--      bool "BMIPS4380"
--      depends on SYS_HAS_CPU_BMIPS4380
--      select CPU_BMIPS
--      select SYS_SUPPORTS_SMP
--      select SYS_SUPPORTS_HOTPLUG_CPU
--      help
--        Broadcom BMIPS4380 processors.
--
--config CPU_BMIPS5000
--      bool "BMIPS5000"
--      depends on SYS_HAS_CPU_BMIPS5000
--      select CPU_BMIPS
--      select CPU_SUPPORTS_HIGHMEM
--      select MIPS_CPU_SCACHE
--      select SYS_SUPPORTS_SMP
--      select SYS_SUPPORTS_HOTPLUG_CPU
-+config CPU_BMIPS
-+      bool "Broadcom BMIPS"
-+      depends on SYS_HAS_CPU_BMIPS
-+      select CPU_MIPS32
-+      select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
-+      select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
-+      select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
-+      select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
-+      select CPU_SUPPORTS_32BIT_KERNEL
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SWAP_IO_SPACE
-+      select WEAK_ORDERING
-       help
--        Broadcom BMIPS5000 processors.
-+        Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
- config CPU_XLR
-       bool "Netlogic XLR SoC"
-@@ -1513,14 +1493,25 @@ config CPU_LOONGSON1
-       select CPU_SUPPORTS_32BIT_KERNEL
-       select CPU_SUPPORTS_HIGHMEM
--config CPU_BMIPS
-+config CPU_BMIPS3300
-       bool
--      select CPU_MIPS32
--      select CPU_SUPPORTS_32BIT_KERNEL
--      select DMA_NONCOHERENT
--      select IRQ_CPU
--      select SWAP_IO_SPACE
--      select WEAK_ORDERING
-+
-+config CPU_BMIPS4350
-+      bool
-+      select SYS_SUPPORTS_SMP
-+      select SYS_SUPPORTS_HOTPLUG_CPU
-+
-+config CPU_BMIPS4380
-+      bool
-+      select SYS_SUPPORTS_SMP
-+      select SYS_SUPPORTS_HOTPLUG_CPU
-+
-+config CPU_BMIPS5000
-+      bool
-+      select CPU_SUPPORTS_HIGHMEM
-+      select MIPS_CPU_SCACHE
-+      select SYS_SUPPORTS_SMP
-+      select SYS_SUPPORTS_HOTPLUG_CPU
- config SYS_HAS_CPU_LOONGSON2E
-       bool
-@@ -1594,17 +1585,24 @@ config SYS_HAS_CPU_SB1
- config SYS_HAS_CPU_CAVIUM_OCTEON
-       bool
-+config SYS_HAS_CPU_BMIPS
-+      bool
-+
- config SYS_HAS_CPU_BMIPS3300
-       bool
-+      select SYS_HAS_CPU_BMIPS
- config SYS_HAS_CPU_BMIPS4350
-       bool
-+      select SYS_HAS_CPU_BMIPS
- config SYS_HAS_CPU_BMIPS4380
-       bool
-+      select SYS_HAS_CPU_BMIPS
- config SYS_HAS_CPU_BMIPS5000
-       bool
-+      select SYS_HAS_CPU_BMIPS
- config SYS_HAS_CPU_XLR
-       bool
diff --git a/target/linux/brcm63xx/patches-3.13/011-MIPS-BMIPS-select-CPU_SUPPORTS_HIGHMEM.patch b/target/linux/brcm63xx/patches-3.13/011-MIPS-BMIPS-select-CPU_SUPPORTS_HIGHMEM.patch
deleted file mode 100644 (file)
index 2c66d56..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From 89d4a38dde99a6b141e90860fca594a9ac66336b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jul 2013 14:02:57 +0200
-Subject: [PATCH V2 05/13] MIPS: BMIPS: select CPU_SUPPORTS_HIGHMEM
-
-All BMIPS CPUs support HIGHMEM, so it should be selected by CPU_BMIPS.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1409,6 +1409,7 @@ config CPU_BMIPS
-       select IRQ_CPU
-       select SWAP_IO_SPACE
-       select WEAK_ORDERING
-+      select CPU_SUPPORTS_HIGHMEM
-       help
-         Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
-@@ -1508,7 +1509,6 @@ config CPU_BMIPS4380
- config CPU_BMIPS5000
-       bool
--      select CPU_SUPPORTS_HIGHMEM
-       select MIPS_CPU_SCACHE
-       select SYS_SUPPORTS_SMP
-       select SYS_SUPPORTS_HOTPLUG_CPU
diff --git a/target/linux/brcm63xx/patches-3.13/012-MIPS-BMIPS-select-CPU_HAS_PREFETCH.patch b/target/linux/brcm63xx/patches-3.13/012-MIPS-BMIPS-select-CPU_HAS_PREFETCH.patch
deleted file mode 100644 (file)
index 733dc04..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-From 58827e709eb7a2e0899260893a5c9c58eb0c5db1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jul 2013 14:04:40 +0200
-Subject: [PATCH V2 06/13] MIPS: BMIPS: select CPU_HAS_PREFETCH
-
-As they are MIPS32 CPUs they do support the prefetch opcode.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1410,6 +1410,7 @@ config CPU_BMIPS
-       select SWAP_IO_SPACE
-       select WEAK_ORDERING
-       select CPU_SUPPORTS_HIGHMEM
-+      select CPU_HAS_PREFETCH
-       help
-         Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
diff --git a/target/linux/brcm63xx/patches-3.13/013-MIPS-BMIPS-extend-BMIPS3300-to-include-BMIPS32.patch b/target/linux/brcm63xx/patches-3.13/013-MIPS-BMIPS-extend-BMIPS3300-to-include-BMIPS32.patch
deleted file mode 100644 (file)
index a5667ad..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
-From e742d5b77ec18926293ec5d101470522f67ee159 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 15 Aug 2013 12:10:11 +0200
-Subject: [PATCH V2 07/13] MIPS: BMIPS: extend BMIPS3300 to include BMIPS32
-
-Codewise there is no difference between these two, so it does not make
-sense to treat them differently. Also chip families having one of these
-tend to have the other.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1400,7 +1400,7 @@ config CPU_BMIPS
-       bool "Broadcom BMIPS"
-       depends on SYS_HAS_CPU_BMIPS
-       select CPU_MIPS32
--      select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
-+      select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
-       select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
-       select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
-       select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
-@@ -1412,7 +1412,7 @@ config CPU_BMIPS
-       select CPU_SUPPORTS_HIGHMEM
-       select CPU_HAS_PREFETCH
-       help
--        Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
-+        Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
- config CPU_XLR
-       bool "Netlogic XLR SoC"
-@@ -1495,7 +1495,7 @@ config CPU_LOONGSON1
-       select CPU_SUPPORTS_32BIT_KERNEL
-       select CPU_SUPPORTS_HIGHMEM
--config CPU_BMIPS3300
-+config CPU_BMIPS32_3300
-       bool
- config CPU_BMIPS4350
-@@ -1589,7 +1589,7 @@ config SYS_HAS_CPU_CAVIUM_OCTEON
- config SYS_HAS_CPU_BMIPS
-       bool
--config SYS_HAS_CPU_BMIPS3300
-+config SYS_HAS_CPU_BMIPS32_3300
-       bool
-       select SYS_HAS_CPU_BMIPS
diff --git a/target/linux/brcm63xx/patches-3.13/014-MIPS-BMIPS-add-a-smp-ops-registration-helper.patch b/target/linux/brcm63xx/patches-3.13/014-MIPS-BMIPS-add-a-smp-ops-registration-helper.patch
deleted file mode 100644 (file)
index c236075..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0b135a3e8f344061ed0aa66e2514627dd7aa946f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 23 Jun 2013 14:04:51 +0200
-Subject: [PATCH V2 08/13] MIPS: BMIPS: add a smp ops registration helper
-
-Add a helper similar to the generic register_XXX_smp_ops() for bmips.
-Register SMP UP ops in case of BMIPS32/3300.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
- * use SMP_UP (ops) in case of BMIPS32_3300
-
- arch/mips/Kconfig             |  1 +
- arch/mips/bcm63xx/prom.c      |  2 +-
- arch/mips/include/asm/bmips.h | 26 ++++++++++++++++++++++++++
- 3 files changed, 28 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1496,6 +1496,7 @@ config CPU_LOONGSON1
-       select CPU_SUPPORTS_HIGHMEM
- config CPU_BMIPS32_3300
-+      select SMP_UP if SMP
-       bool
- config CPU_BMIPS4350
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -61,7 +61,7 @@ void __init prom_init(void)
-       if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
-               /* set up SMP */
--              register_smp_ops(&bmips43xx_smp_ops);
-+              register_bmips_smp_ops();
-               /*
-                * BCM6328 might not have its second CPU enabled, while BCM3368
---- a/arch/mips/include/asm/bmips.h
-+++ b/arch/mips/include/asm/bmips.h
-@@ -46,9 +46,35 @@
- #include <linux/cpumask.h>
- #include <asm/r4kcache.h>
-+#include <asm/smp-ops.h>
- extern struct plat_smp_ops bmips43xx_smp_ops;
- extern struct plat_smp_ops bmips5000_smp_ops;
-+
-+static inline int register_bmips_smp_ops(void)
-+{
-+#if IS_ENABLED(CONFIG_CPU_BMIPS) && IS_ENABLED(CONFIG_SMP)
-+      switch (current_cpu_type()) {
-+      case CPU_BMIPS32:
-+      case CPU_BMIPS3300:
-+              return register_up_smp_ops();
-+      case CPU_BMIPS4350:
-+      case CPU_BMIPS4380:
-+              register_smp_ops(&bmips43xx_smp_ops);
-+              break;
-+      case CPU_BMIPS5000:
-+              register_smp_ops(&bmips5000_smp_ops);
-+              break;
-+      default:
-+              return -ENODEV;
-+      }
-+
-+      return 0;
-+#else
-+      return -ENODEV;
-+#endif
-+}
-+
- extern char bmips_reset_nmi_vec;
- extern char bmips_reset_nmi_vec_end;
- extern char bmips_smp_movevec;
diff --git a/target/linux/brcm63xx/patches-3.13/015-MIPS-BCM63XX-always-register-bmips-smp-ops.patch b/target/linux/brcm63xx/patches-3.13/015-MIPS-BCM63XX-always-register-bmips-smp-ops.patch
deleted file mode 100644 (file)
index 6590185..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-From 08181bee8ee375225129d086656c567022becf41 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 28 Jun 2013 00:08:16 +0200
-Subject: [PATCH V2 09/13] MIPS: BCM63XX: always register bmips smp ops
-
-Use the return value for guarding further SMP setup.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/prom.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -59,10 +59,8 @@ void __init prom_init(void)
-       /* do low level board init */
-       board_prom_init();
--      if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
--              /* set up SMP */
--              register_bmips_smp_ops();
--
-+      /* set up SMP */
-+      if (!register_bmips_smp_ops()) {
-               /*
-                * BCM6328 might not have its second CPU enabled, while BCM3368
-                * and BCM6358 need special handling for their shared TLB, so
diff --git a/target/linux/brcm63xx/patches-3.13/016-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch b/target/linux/brcm63xx/patches-3.13/016-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch
deleted file mode 100644 (file)
index 9c17a7b..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From 949b88531a779af4f6456ff43d3de2d4f74e44ee Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 23 Jun 2013 12:25:49 +0200
-Subject: [PATCH V2 10/13] MIPS: BCM63XX: let the individual SoCs select the
- appropriate CPUs
-
-Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS*
-option for its embedded processor, so support will be conditionally
-included.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig         | 1 -
- arch/mips/bcm63xx/Kconfig | 8 ++++++++
- 2 files changed, 8 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -133,7 +133,6 @@ config BCM63XX
-       select DMA_NONCOHERENT
-       select IRQ_CPU
-       select SYS_HAS_CPU_MIPS32_R1
--      select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -3,33 +3,41 @@ menu "CPU support"
- config BCM63XX_CPU_3368
-       bool "support 3368 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
- config BCM63XX_CPU_6345
-       bool "support 6345 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
- config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
- endmenu
diff --git a/target/linux/brcm63xx/patches-3.13/017-MIPS-cpu-type-guard-BMIPS-variants-with-SYS_HAS_CPU_.patch b/target/linux/brcm63xx/patches-3.13/017-MIPS-cpu-type-guard-BMIPS-variants-with-SYS_HAS_CPU_.patch
deleted file mode 100644 (file)
index 96e6dfb..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-From c515f21d7680015bc94e0c081b73aba5a3d74680 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 17 Oct 2013 13:14:48 +0200
-Subject: [PATCH V2 12/13] MIPS: cpu-type: guard BMIPS variants with
- SYS_HAS_CPU_BMIPS*
-
-BMIPS32 and  BMIPS3300 also need to be available for MIPS32R1, as
-bcm47xx might not select BMIPS.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/cpu-type.h | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/arch/mips/include/asm/cpu-type.h
-+++ b/arch/mips/include/asm/cpu-type.h
-@@ -27,10 +27,7 @@ static inline int __pure __get_cpu_type(
- #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
-       case CPU_4KC:
-       case CPU_ALCHEMY:
--      case CPU_BMIPS3300:
--      case CPU_BMIPS4350:
-       case CPU_PR4450:
--      case CPU_BMIPS32:
-       case CPU_JZRISC:
- #endif
-@@ -163,6 +160,16 @@ static inline int __pure __get_cpu_type(
-       case CPU_CAVIUM_OCTEON2:
- #endif
-+#if defined(CONFIG_SYS_HAS_CPU_BMIPS32_3300) || \
-+      defined (CONFIG_SYS_HAS_CPU_MIPS32_R1)
-+      case CPU_BMIPS32:
-+      case CPU_BMIPS3300:
-+#endif
-+
-+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4350
-+      case CPU_BMIPS4350:
-+#endif
-+
- #ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
-       case CPU_BMIPS4380:
- #endif
diff --git a/target/linux/brcm63xx/patches-3.13/018-MIPS-BCM63XX-drop-SYS_HAS_CPU_MIPS32R1.patch b/target/linux/brcm63xx/patches-3.13/018-MIPS-BCM63XX-drop-SYS_HAS_CPU_MIPS32R1.patch
deleted file mode 100644 (file)
index 0337697..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From c6c4897703d825c9efea6d9a708aaa080c8c3177 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 17 Oct 2013 13:16:08 +0200
-Subject: [PATCH V2 13/13] MIPS: BCM63XX: drop SYS_HAS_CPU_MIPS32R1
-
-All MIPS cores on BCM63XX identify as Broadcom, not MIPS, so no need
-to support non-broadcom MIPS CPUs. This also ensures that CPU_BMIPS
-is always selected.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -132,7 +132,6 @@ config BCM63XX
-       select CSRC_R4K
-       select DMA_NONCOHERENT
-       select IRQ_CPU
--      select SYS_HAS_CPU_MIPS32_R1
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
diff --git a/target/linux/brcm63xx/patches-3.13/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.13/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644 (file)
index 63d385b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              msleep(100);
- }
- static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-3.13/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.13/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644 (file)
index eaf7503..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              udelay(10);
- }
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -386,7 +386,6 @@ static inline void set_clocks(struct bcm
-       if (is_enabled) {
-               clk_enable(udc->usbh_clk);
-               clk_enable(udc->usbd_clk);
--              udelay(10);
-       } else {
-               clk_disable(udc->usbd_clk);
-               clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-3.13/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.13/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644 (file)
index 88217bd..0000000
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--                 dev-wdt.o dev-usb-usbd.o
-+                 dev-wdt.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_device) {
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      } else {
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      }
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+      if (is_device)
-+              val |= USBH_PRIV_SWAP_USBD_MASK;
-+      else
-+              val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_on)
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      else
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -41,6 +41,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- #define DRV_MODULE_NAME               "bcm63xx_udc"
-@@ -863,22 +864,7 @@ static void bcm63xx_select_phy_mode(stru
-               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
-       }
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_device) {
--              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      } else {
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      }
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--      if (is_device)
--              val |= USBH_PRIV_SWAP_USBD_MASK;
--      else
--              val &= ~USBH_PRIV_SWAP_USBD_MASK;
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- /**
-@@ -892,14 +878,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--      u32 val, portmask = BIT(udc->pd->port_no);
-+      u32 portmask = BIT(udc->pd->port_no);
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_on)
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      else
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+      bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- /**
diff --git a/target/linux/brcm63xx/patches-3.13/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.13/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644 (file)
index 40bbe08..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
-       else
-               val &= ~USBH_PRIV_SWAP_USBD_MASK;
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
-       else
-               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA       ENDN    mmio    descriptor
-+ * 0  0       BE      invalid
-+ * 0  1       BE      LE
-+ * 1  0       BE      BE
-+ * 1  1       BE      invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6348())
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+      else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-3.13/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.13/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644 (file)
index 768dcca..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+config BCM63XX_OHCI
-+      bool
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.13/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.13/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644 (file)
index 111d481..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--                 dev-wdt.o dev-usb-usbd.o usb-common.o
-+                 dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ohci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .no_big_frame_no        = 1,
-+      .num_ports              = 1,
-+      .power_on               = bcm63xx_ohci_power_on,
-+      .power_off              = bcm63xx_ohci_power_off,
-+      .power_suspend          = bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "ohci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ohci_pdata,
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+              return -ENODEV;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.13/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.13/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 2c26482..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -898,6 +899,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
diff --git a/target/linux/brcm63xx/patches-3.13/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.13/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644 (file)
index bce91e3..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -12,11 +12,18 @@ config BCM63XX_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+config BCM63XX_EHCI
-+      bool
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.13/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.13/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644 (file)
index 8b1f8d2..0000000
+++ /dev/null
@@ -1,137 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,8 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--                 dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
-+                 usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ehci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .power_on               = bcm63xx_ehci_power_on,
-+      .power_off              = bcm63xx_ehci_power_off,
-+      .power_suspend          = bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "ehci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ehci_pdata,
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.13/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.13/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 641a57c..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -899,6 +900,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
diff --git a/target/linux/brcm63xx/patches-3.13/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.13/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644 (file)
index 6d91129..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-+      .ignore_oc              = 1,
-       .power_on               = bcm63xx_ehci_power_on,
-       .power_off              = bcm63xx_ehci_power_off,
-       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-3.13/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-3.13/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
deleted file mode 100644 (file)
index 00dc9c9..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 1 Jul 2011 23:16:47 +0200
-Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- include/linux/spi/flash.h |    5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -2,7 +2,7 @@
- #define LINUX_SPI_FLASH_H
- struct mtd_partition;
--
-+struct mtd_part_parser_data;
- /**
-  * struct flash_platform_data: board-specific flash data
-  * @name: optional flash device name (eg, as used with mtdparts=)
-@@ -10,6 +10,8 @@ struct mtd_partition;
-  * @nr_parts: number of mtd_partitions for static partitoning
-  * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
-  *    with chips that can't be queried for JEDEC or other IDs
-+ * @part_probe_types: optional list of MTD parser names to use for
-+ *    partitioning
-  *
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-@@ -25,6 +27,7 @@ struct flash_platform_data {
-       char            *type;
-+      const char      **part_probe_types;
-       /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/brcm63xx/patches-3.13/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.13/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
deleted file mode 100644 (file)
index 2396aeb..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 16:53:08 +0100
-Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
- platform data
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -1124,7 +1124,8 @@ static int m25p_probe(struct spi_device
-       /* partitions should match sector boundaries; and it may be good to
-        * use readonly partitions for writeprotected sectors (BP2..BP0).
-        */
--      return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
-+      return mtd_device_parse_register(&flash->mtd,
-+                      data ? data->part_probe_types : NULL, &ppdata,
-                       data ? data->parts : NULL,
-                       data ? data->nr_parts : 0);
- }
diff --git a/target/linux/brcm63xx/patches-3.13/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.13/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
deleted file mode 100644 (file)
index c2842c1..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 17:33:40 +0100
-Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
- include/linux/spi/flash.h    |    4 ++++
- 2 files changed, 31 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -101,6 +101,7 @@ struct m25p {
-       u8                      program_opcode;
-       u8                      *command;
-       bool                    fast_read;
-+      int                     max_transfer_len;
- };
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -359,10 +360,9 @@ static int m25p80_erase(struct mtd_info
-  * Read an address range from the flash chip.  The address range
-  * may be any size provided it is within the physical boundaries.
-  */
--static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
-       size_t *retlen, u_char *buf)
- {
--      struct m25p *flash = mtd_to_m25p(mtd);
-       struct spi_transfer t[2];
-       struct spi_message m;
-       uint8_t opcode;
-@@ -405,6 +405,28 @@ static int m25p80_read(struct mtd_info *
-       return 0;
- }
-+static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+      size_t *retlen, u_char *buf)
-+{
-+      struct m25p *flash = mtd_to_m25p(mtd);
-+      size_t off;
-+      size_t read_len = flash->max_transfer_len;
-+      size_t part_len;
-+      int ret = 0;
-+
-+      if (!read_len)
-+              return __m25p80_read(flash, from, len, retlen, buf);
-+
-+      *retlen = 0;
-+
-+      for (off = 0; off < len && !ret; off += read_len) {
-+              ret = __m25p80_read(flash, from + off, min(len - off, read_len),
-+                                  &part_len, buf + off);
-+                      *retlen += part_len;
-+      }
-+
-+      return ret;
-+}
- /*
-  * Write an address range to the flash chip.  Data must be written in
-  * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -1001,6 +1023,9 @@ static int m25p_probe(struct spi_device
-       if (!flash->command)
-               return -ENOMEM;
-+      if (data)
-+              flash->max_transfer_len = data->max_transfer_len;
-+
-       flash->spi = spi;
-       mutex_init(&flash->lock);
-       spi_set_drvdata(spi, flash);
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
-  * @part_probe_types: optional list of MTD parser names to use for
-  *    partitioning
-  *
-+ * @max_transfer_len: option maximum read/write length limitation for
-+ *    SPI controllers not able to transfer any length commands.
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-  * help set up the device and its appropriate default partitioning.
-@@ -28,6 +30,8 @@ struct flash_platform_data {
-       char            *type;
-       const char      **part_probe_types;
-+
-+      unsigned int    max_transfer_len;
-       /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/brcm63xx/patches-3.13/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch b/target/linux/brcm63xx/patches-3.13/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
deleted file mode 100644 (file)
index 1f175f4..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From b2f399dcd674a692a64bb3b300b77b78ae57b530 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 12 Jan 2014 16:47:35 +0100
-Subject: [PATCH] USB: OHCI: allow other arches to use the BE frame number
- quirk
-
-Intead of guarding it with a certain PPC SoC and expanding the list
-for each SoC requiring it, just guard it with USB_OHCI_BIG_ENDIAN_DESC.
-
-This makes it less suprising that passing no_big_frame_no = 1 for the
-platform data does not do what expected (or
-
-Checking it for all big endian descriptor setups should not impact
-performance much as USB1.1 is rather slow anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ohci.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -650,7 +650,7 @@ static inline u32 hc32_to_cpup (const st
-  * some big-endian SOC implementations.  Same thing happens with PSW access.
-  */
--#ifdef CONFIG_PPC_MPC52xx
-+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
- #define big_endian_frame_no_quirk(ohci)       (ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci)       0
diff --git a/target/linux/brcm63xx/patches-3.13/205-USB-fix-bcm63xx_udc.patch b/target/linux/brcm63xx/patches-3.13/205-USB-fix-bcm63xx_udc.patch
deleted file mode 100644 (file)
index f13a13d..0000000
+++ /dev/null
@@ -1,168 +0,0 @@
-From a864a5b3efe9dce1647172d105559a1b850cf4c9 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 14 Jan 2014 15:29:25 -0800
-Subject: [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel
- code
-
-Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
-changed the ENETDMA[CS] macros such that they are no longer macros, but
-actual register offset definitions. The bcm63xx_udc driver was not
-updated, and as a result, causes the following build error to pop up:
-
- CC      drivers/usb/gadget/u_ether.o
-drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
-drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
-a function
-drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
-drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
-a function
-drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
-a function
-
-Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
-take an extra channel argument, and use the channel width
-(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
-doing again what the macro implicitely did for us.
-
-CC: Kevin Cernekee <cernekee@gmail.com>
-CC: Jonas Gorski <jogo@openwrt.org>
-CC: stable@vger.kernel.org
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
-Felipe,
-
-This is against your branch as balbi/usb.git, and this fix should be applied to
-stable 3.11 onwards.
-
-Thanks!
-
- drivers/usb/gadget/bcm63xx_udc.c | 58 ++++++++++++++++++++++------------------
- 1 file changed, 32 insertions(+), 26 deletions(-)
-
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -362,24 +362,30 @@ static inline void usb_dma_writel(struct
-       bcm_writel(val, udc->iudma_regs + off);
- }
--static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
-+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
- {
--      return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
-+      return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
-+                      (ENETDMA_CHAN_WIDTH * chan));
- }
--static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
-+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
-+                                      int chan)
- {
--      bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
-+      bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
-+                      (ENETDMA_CHAN_WIDTH * chan));
- }
--static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
-+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
- {
--      return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
-+      return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
-+                      (ENETDMA_CHAN_WIDTH * chan));
- }
--static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
-+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
-+                                      int chan)
- {
--      bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
-+      bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
-+                      (ENETDMA_CHAN_WIDTH * chan));
- }
- static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
-@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u
-       } while (!last_bd);
-       usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
--                      ENETDMAC_CHANCFG_REG(iudma->ch_idx));
-+                      ENETDMAC_CHANCFG_REG, iudma->ch_idx);
- }
- /**
-@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b
-               bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
-       /* stop DMA, then wait for the hardware to wrap up */
--      usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
-+      usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
--      while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
-+      while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
-                                  ENETDMAC_CHANCFG_EN_MASK) {
-               udelay(1);
-@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b
-                       dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
-                                ch_idx);
-                       usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
--                                      ENETDMAC_CHANCFG_REG(ch_idx));
-+                                      ENETDMAC_CHANCFG_REG, ch_idx);
-               }
-       }
--      usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
-+      usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
-       /* don't leave "live" HW-owned entries for the next guy to step on */
-       for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
-@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b
-       /* set up IRQs, UBUS burst size, and BD base for this channel */
-       usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
--                      ENETDMAC_IRMASK_REG(ch_idx));
--      usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
-+                      ENETDMAC_IRMASK_REG, ch_idx);
-+      usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
--      usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
--      usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
-+      usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
-+      usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
- }
- /**
-@@ -2016,7 +2022,7 @@ static irqreturn_t bcm63xx_udc_data_isr(
-       spin_lock(&udc->lock);
-       usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
--                      ENETDMAC_IR_REG(iudma->ch_idx));
-+                      ENETDMAC_IR_REG, iudma->ch_idx);
-       bep = iudma->bep;
-       rc = iudma_read(udc, iudma);
-@@ -2156,18 +2162,18 @@ static int bcm63xx_iudma_dbg_show(struct
-               seq_printf(s, " [ep%d]:\n",
-                          max_t(int, iudma_defaults[ch_idx].ep_num, 0));
-               seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
--                         usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
--                         usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
--                         usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
--                         usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
-+                         usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
-+                         usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
-+                         usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
-+                         usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
--              sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
--              sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
-+              sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
-+              sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
-               seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
--                         usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
-+                         usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
-                          sram2 >> 16, sram2 & 0xffff,
-                          sram3 >> 16, sram3 & 0xffff,
--                         usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
-+                         usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
-               seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
-                          iudma->n_bds);
diff --git a/target/linux/brcm63xx/patches-3.13/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-3.13/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644 (file)
index 7375acb..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -661,6 +661,10 @@ int ehci_setup(struct usb_hcd *hcd)
-       /* cache this readonly data; minimize chip reads */
-       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+      if (ehci->num_ports) {
-+              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+              ehci->hcs_params |= ehci->num_ports;
-+      }
-       ehci->sbrn = HCD_USB2;
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -48,6 +48,8 @@ static int ehci_platform_reset(struct us
-       ehci->big_endian_desc = pdata->big_endian_desc;
-       ehci->big_endian_mmio = pdata->big_endian_mmio;
-       ehci->ignore_oc = pdata->ignore_oc;
-+      if (pdata->num_ports && pdata->num_ports <= 15)
-+              ehci->num_ports = pdata->num_ports;
-       if (pdata->pre_setup) {
-               retval = pdata->pre_setup(hcd);
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -213,6 +213,7 @@ struct ehci_hcd {                  /* one per controlle
-       u32                     command;
-       /* SILICON QUIRKS */
-+      unsigned int            num_ports;
-       unsigned                no_selective_suspend:1;
-       unsigned                has_fsl_port_bug:1; /* FreeScale */
-       unsigned                big_endian_mmio:1;
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -40,6 +40,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
-       int             caps_offset;
-+      unsigned int    num_ports;
-       unsigned        has_tt:1;
-       unsigned        has_synopsys_hc_bug:1;
-       unsigned        big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-3.13/300-reset_buttons.patch b/target/linux/brcm63xx/patches-3.13/300-reset_buttons.patch
deleted file mode 100644 (file)
index 0886f6c..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,8 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -37,6 +39,9 @@
- #define HCS_OFFSET_128K                       0x20000
-+#define BCM963XX_KEYS_POLL_INTERVAL   20
-+#define BCM963XX_KEYS_DEBOUNCE_INTERVAL       (BCM963XX_KEYS_POLL_INTERVAL * 3)
-+
- static struct board_info board;
- /*
-@@ -380,6 +385,16 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_96348gw = {
-@@ -438,6 +453,16 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_FAST2404 = {
-@@ -871,11 +896,23 @@ static struct platform_device bcm63xx_gp
-       .dev.platform_data      = &bcm63xx_led_data,
- };
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+      .poll_interval  = BCM963XX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+      .name           = "gpio-keys-polled",
-+      .id             = 0,
-+      .dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
- /*
-  * third stage init callback, register all board devices.
-  */
- int __init board_register_devices(void)
- {
-+      int button_count = 0;
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -937,5 +974,16 @@ int __init board_register_devices(void)
-               gpio_request_one(board.ephy_reset_gpio,
-                               board.ephy_reset_gpio_flags, "ephy-reset");
-+      /* count number of BUTTONs defined by this device */
-+      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+              button_count++;
-+
-+      if (button_count) {
-+              bcm63xx_gpio_keys_data.nbuttons = button_count;
-+              bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+              platform_device_register(&bcm63xx_gpio_keys_device);
-+      }
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -3,6 +3,7 @@
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -48,6 +49,9 @@ struct board_info {
-       /* GPIO LEDs */
-       struct gpio_led leds[5];
-+      /* Buttons */
-+      struct gpio_keys_button buttons[4];
-+
-       /* External PHY reset GPIO */
-       unsigned int ephy_reset_gpio;
diff --git a/target/linux/brcm63xx/patches-3.13/301-led_count.patch b/target/linux/brcm63xx/patches-3.13/301-led_count.patch
deleted file mode 100644 (file)
index 5b9a12e..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,6 +912,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int button_count = 0;
-+      int led_count = 0;
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -965,10 +966,16 @@ int __init board_register_devices(void)
-       bcm63xx_flash_register();
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--      bcm63xx_led_data.leds = board.leds;
-+      /* count number of LEDs defined by this device */
-+      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+              led_count++;
-+
-+      if (led_count) {
-+              bcm63xx_led_data.num_leds = led_count;
-+              bcm63xx_led_data.leds = board.leds;
--      platform_device_register(&bcm63xx_gpio_leds);
-+              platform_device_register(&bcm63xx_gpio_leds);
-+      }
-       if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-               gpio_request_one(board.ephy_reset_gpio,
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -47,7 +47,7 @@ struct board_info {
-       struct bcm63xx_dsp_platform_data dsp;
-       /* GPIO LEDs */
--      struct gpio_led leds[5];
-+      struct gpio_led leds[14];
-       /* Buttons */
-       struct gpio_keys_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.13/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.13/302-extended-platform-devices.patch
deleted file mode 100644 (file)
index 2810b6f..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -964,6 +964,9 @@ int __init board_register_devices(void)
-       bcm63xx_hsspi_register();
-+      if (board.num_devs)
-+              platform_add_devices(board.devs, board.num_devs);
-+
-       bcm63xx_flash_register();
-       /* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,6 +57,10 @@ struct board_info {
-       /* External PHY reset GPIO flags from gpio.h */
-       unsigned long ephy_reset_gpio_flags;
-+
-+      /* Additional platform devices */
-+      struct platform_device **devs;
-+      unsigned int    num_devs;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.13/303-spi-board-info.patch b/target/linux/brcm63xx/patches-3.13/303-spi-board-info.patch
deleted file mode 100644 (file)
index 0258710..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -967,6 +968,9 @@ int __init board_register_devices(void)
-       if (board.num_devs)
-               platform_add_devices(board.devs, board.num_devs);
-+      if (board.num_spis)
-+              spi_register_board_info(board.spis, board.num_spis);
-+
-       bcm63xx_flash_register();
-       /* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -61,6 +61,10 @@ struct board_info {
-       /* Additional platform devices */
-       struct platform_device **devs;
-       unsigned int    num_devs;
-+
-+      /* Additional platform devices */
-+      struct spi_board_info *spis;
-+      unsigned int    num_spis;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.13/304-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.13/304-boardid_fixup.patch
deleted file mode 100644 (file)
index 937b9d6..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,6 +35,7 @@
- #include <board_bcm963xx.h>
- #include <uapi/linux/bcm933xx_hcs.h>
-+#include <uapi/linux/bcm963xx_tag.h>
- #define PFX   "board_bcm963xx: "
-@@ -43,6 +44,9 @@
- #define BCM963XX_KEYS_POLL_INTERVAL   20
- #define BCM963XX_KEYS_DEBOUNCE_INTERVAL       (BCM963XX_KEYS_POLL_INTERVAL * 3)
-+#define CFE_OFFSET_64K                        0x10000
-+#define CFE_OFFSET_128K                       0x20000
-+
- static struct board_info board;
- /*
-@@ -782,6 +786,30 @@ const char *board_get_name(void)
-       return board.name;
- }
-+static void __init boardid_fixup(u8 *boot_addr)
-+{
-+      struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+      char *board_name = (char *)bcm63xx_nvram_get_name();
-+
-+      /* check if bcm_tag is at 64k offset */
-+      if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-+              /* else try 128k */
-+              tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-+              if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-+                      /* No tag found */
-+                      printk(KERN_DEBUG "No bcm_tag found!\n");
-+                      return;
-+              }
-+      }
-+      /* check if we should override the boardid */
-+      if (tag->information1[0] != '+')
-+              return;
-+
-+      strncpy(board_name, &tag->information1[1], BOARDID_LEN);
-+
-+      printk(KERN_INFO "Overriding boardid with '%s'\n", board_name);
-+}
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -820,6 +848,10 @@ void __init board_prom_init(void)
-               hcs = (struct bcm_hcs *)boot_addr;
-               board_name = hcs->filename;
-       } else {
-+              if (strcmp(cfe_version, "unknown") != 0) {
-+                      /* cfe present */
-+                      boardid_fixup(boot_addr);
-+              }
-               board_name = bcm63xx_nvram_get_name();
-       }
-       /* find board by name */
diff --git a/target/linux/brcm63xx/patches-3.13/308-board_leds_naming.patch b/target/linux/brcm63xx/patches-3.13/308-board_leds_naming.patch
deleted file mode 100644 (file)
index 0064066..0000000
+++ /dev/null
@@ -1,267 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -148,28 +148,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl",
-+                      .name           = "96338GW:green:adsl",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ses",
-+                      .name           = "96338GW:green:ses",
-                       .gpio           = 5,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96338GW:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96338GW:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96338GW:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               }
-@@ -189,28 +189,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl",
-+                      .name           = "96338W:green:adsl",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ses",
-+                      .name           = "96338W:green:ses",
-                       .gpio           = 5,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96338W:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96338W:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96338W:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -249,29 +249,29 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348R:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348R:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348R:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348R:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348R:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -310,28 +310,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348GW-10:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348GW-10:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348GW-10:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348GW-10:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348GW-10:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -364,28 +364,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348GW-11:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348GW-11:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348GW-11:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348GW-11:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348GW-11:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -432,28 +432,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348GW:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348GW:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348GW:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348GW:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348GW:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -585,27 +585,27 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96358VW:green:adsl-fail",
-                       .gpio           = 15,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96358VW:green:ppp",
-                       .gpio           = 22,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96358VW:green:ppp-fail",
-                       .gpio           = 23,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96358VW:green:power",
-                       .gpio           = 4,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96358VW:green:stop",
-                       .gpio           = 5,
-               },
-       },
-@@ -637,22 +637,22 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl",
-+                      .name           = "96358VW2:green:adsl",
-                       .gpio           = 22,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96358VW2:green:ppp-fail",
-                       .gpio           = 23,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96358VW2:green:power",
-                       .gpio           = 5,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96358VW2:green:stop",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
diff --git a/target/linux/brcm63xx/patches-3.13/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.13/309-cfe_version_mod.patch
deleted file mode 100644 (file)
index dfc3384..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -835,10 +835,20 @@ void __init board_prom_init(void)
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--      if (!memcmp(cfe, "cfe-v", 5))
--              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--      else
-+      if (strstarts(cfe, "cfe-")) {
-+              if(cfe[4] == 'v') {
-+                      if(cfe[5] == 'd')
-+                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
-+                      else if (cfe[10] > 0)
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
-+                      else
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+              } else {
-+                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+              }
-+      } else
-               strcpy(cfe_version, "unknown");
-       printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
diff --git a/target/linux/brcm63xx/patches-3.13/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch b/target/linux/brcm63xx/patches-3.13/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
deleted file mode 100644 (file)
index 04b3426..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From 082a49f0490008b999db80e3ccf1521c7dd21cec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 2 Dec 2013 12:32:44 +0100
-Subject: [PATCH 1/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from register
- sets
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 33 ------------------------
- 1 file changed, 33 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -598,10 +598,6 @@ enum bcm63xx_regs_set {
- extern const unsigned long *bcm63xx_regs_base;
--#define __GEN_RSET_BASE(__cpu, __rset)                                        \
--      case RSET_## __rset :                                           \
--              return BCM_## __cpu ##_## __rset ##_BASE;
--
- #define __GEN_RSET(__cpu)                                             \
-       switch (set) {                                                  \
-       __GEN_RSET_BASE(__cpu, DSL_LMEM)                                \
-@@ -693,36 +689,7 @@ extern const unsigned long *bcm63xx_regs
- static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
- {
--#ifdef BCMCPU_RUNTIME_DETECT
-       return bcm63xx_regs_base[set];
--#else
--#ifdef CONFIG_BCM63XX_CPU_3368
--      __GEN_RSET(3368)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6328
--      __GEN_RSET(6328)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6338
--      __GEN_RSET(6338)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6345
--      __GEN_RSET(6345)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6348
--      __GEN_RSET(6348)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6358
--      __GEN_RSET(6358)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6362
--      __GEN_RSET(6362)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6368
--      __GEN_RSET(6368)
--#endif
--#endif
--      /* unreached */
--      return 0;
- }
- /*
diff --git a/target/linux/brcm63xx/patches-3.13/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch b/target/linux/brcm63xx/patches-3.13/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
deleted file mode 100644 (file)
index 9226530..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-From 07d0224576cbb2e6ac680b4ade4bba7a49bd0a07 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 2 Dec 2013 12:34:11 +0100
-Subject: [PATCH 2/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from irq setup code
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 109 ------------------------------------------------
- 1 file changed, 109 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -26,114 +26,6 @@ static void __internal_irq_mask_64(unsig
- static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
--#ifndef BCMCPU_RUNTIME_DETECT
--#ifdef CONFIG_BCM63XX_CPU_3368
--#define irq_stat_reg          PERF_IRQSTAT_3368_REG
--#define irq_mask_reg          PERF_IRQMASK_3368_REG
--#define irq_bits              32
--#define is_ext_irq_cascaded   0
--#define ext_irq_start         0
--#define ext_irq_end           0
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_3368
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6328
--#define irq_stat_reg          PERF_IRQSTAT_6328_REG
--#define irq_mask_reg          PERF_IRQMASK_6328_REG
--#define irq_bits              64
--#define is_ext_irq_cascaded   1
--#define ext_irq_start         (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end           (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6328
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6338
--#define irq_stat_reg          PERF_IRQSTAT_6338_REG
--#define irq_mask_reg          PERF_IRQMASK_6338_REG
--#define irq_bits              32
--#define is_ext_irq_cascaded   0
--#define ext_irq_start         0
--#define ext_irq_end           0
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6338
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6345
--#define irq_stat_reg          PERF_IRQSTAT_6345_REG
--#define irq_mask_reg          PERF_IRQMASK_6345_REG
--#define irq_bits              32
--#define is_ext_irq_cascaded   0
--#define ext_irq_start         0
--#define ext_irq_end           0
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6345
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6348
--#define irq_stat_reg          PERF_IRQSTAT_6348_REG
--#define irq_mask_reg          PERF_IRQMASK_6348_REG
--#define irq_bits              32
--#define is_ext_irq_cascaded   0
--#define ext_irq_start         0
--#define ext_irq_end           0
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6348
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6358
--#define irq_stat_reg          PERF_IRQSTAT_6358_REG
--#define irq_mask_reg          PERF_IRQMASK_6358_REG
--#define irq_bits              32
--#define is_ext_irq_cascaded   1
--#define ext_irq_start         (BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end           (BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE)
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6358
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6362
--#define irq_stat_reg          PERF_IRQSTAT_6362_REG
--#define irq_mask_reg          PERF_IRQMASK_6362_REG
--#define irq_bits              64
--#define is_ext_irq_cascaded   1
--#define ext_irq_start         (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end           (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
--#define ext_irq_count         4
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6362
--#define ext_irq_cfg_reg2      0
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6368
--#define irq_stat_reg          PERF_IRQSTAT_6368_REG
--#define irq_mask_reg          PERF_IRQMASK_6368_REG
--#define irq_bits              64
--#define is_ext_irq_cascaded   1
--#define ext_irq_start         (BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
--#define ext_irq_end           (BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE)
--#define ext_irq_count         6
--#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6368
--#define ext_irq_cfg_reg2      PERF_EXTIRQ_CFG_REG2_6368
--#endif
--
--#if irq_bits == 32
--#define dispatch_internal                     __dispatch_internal
--#define internal_irq_mask                     __internal_irq_mask_32
--#define internal_irq_unmask                   __internal_irq_unmask_32
--#else
--#define dispatch_internal                     __dispatch_internal_64
--#define internal_irq_mask                     __internal_irq_mask_64
--#define internal_irq_unmask                   __internal_irq_unmask_64
--#endif
--
--#define irq_stat_addr (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
--#define irq_mask_addr (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
--
--static inline void bcm63xx_init_irq(void)
--{
--}
--#else /* ! BCMCPU_RUNTIME_DETECT */
--
- static u32 irq_stat_addr, irq_mask_addr;
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
-@@ -234,7 +126,6 @@ static void bcm63xx_init_irq(void)
-               internal_irq_unmask = __internal_irq_unmask_64;
-       }
- }
--#endif /* ! BCMCPU_RUNTIME_DETECT */
- static inline u32 get_ext_irq_perf_reg(int irq)
- {
diff --git a/target/linux/brcm63xx/patches-3.13/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch b/target/linux/brcm63xx/patches-3.13/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
deleted file mode 100644 (file)
index f26624e..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-From 72578a46543821c5b9544842e45fcbed0c1b7eb8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:35:12 +0100
-Subject: [PATCH 3/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from reset code
-
----
- arch/mips/bcm63xx/reset.c | 60 -----------------------------------------------
- 1 file changed, 60 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -125,8 +125,6 @@
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
--#ifdef BCMCPU_RUNTIME_DETECT
--
- /*
-  * core reset bits
-  */
-@@ -188,64 +186,6 @@ static int __init bcm63xx_reset_bits_ini
-       return 0;
- }
--#else
--
--#ifdef CONFIG_BCM63XX_CPU_3368
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(3368)
--};
--#define reset_reg PERF_SOFTRESET_6358_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6328
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(6328)
--};
--#define reset_reg PERF_SOFTRESET_6328_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6338
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(6338)
--};
--#define reset_reg PERF_SOFTRESET_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6345
--static const u32 bcm63xx_reset_bits[] = { };
--#define reset_reg 0
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6348
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(6348)
--};
--#define reset_reg PERF_SOFTRESET_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6358
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(6358)
--};
--#define reset_reg PERF_SOFTRESET_6358_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6362
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(6362)
--};
--#define reset_reg PERF_SOFTRESET_6362_REG
--#endif
--
--#ifdef CONFIG_BCM63XX_CPU_6368
--static const u32 bcm63xx_reset_bits[] = {
--      __GEN_RESET_BITS_TABLE(6368)
--};
--#define reset_reg PERF_SOFTRESET_6368_REG
--#endif
--
--static int __init bcm63xx_reset_bits_init(void) { return 0; }
--#endif
- static DEFINE_SPINLOCK(reset_mutex);
diff --git a/target/linux/brcm63xx/patches-3.13/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch b/target/linux/brcm63xx/patches-3.13/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
deleted file mode 100644 (file)
index 49a3475..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 1aab93c5c97c55fef130726a6f58c9a1fd5b6240 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:36:45 +0100
-Subject: [PATCH 4/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from gpio
-
----
- arch/mips/bcm63xx/gpio.c | 14 --------------
- 1 file changed, 14 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -18,19 +18,6 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
--#ifndef BCMCPU_RUNTIME_DETECT
--#define gpio_out_low_reg      GPIO_DATA_LO_REG
--#ifdef CONFIG_BCM63XX_CPU_6345
--#ifdef gpio_out_low_reg
--#undef gpio_out_low_reg
--#define gpio_out_low_reg      GPIO_DATA_LO_REG_6345
--#endif /* gpio_out_low_reg */
--#endif /* CONFIG_BCM63XX_CPU_6345 */
--
--static inline void bcm63xx_gpio_out_low_reg_init(void)
--{
--}
--#else /* ! BCMCPU_RUNTIME_DETECT */
- static u32 gpio_out_low_reg;
- static void bcm63xx_gpio_out_low_reg_init(void)
-@@ -44,7 +31,6 @@ static void bcm63xx_gpio_out_low_reg_ini
-               break;
-       }
- }
--#endif /* ! BCMCPU_RUNTIME_DETECT */
- static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
- static u32 gpio_out_low, gpio_out_high;
diff --git a/target/linux/brcm63xx/patches-3.13/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch b/target/linux/brcm63xx/patches-3.13/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
deleted file mode 100644 (file)
index afde39b..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-From 94f819bc230bb61a9ff21da6c860a40ca68c2805 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:43:35 +0100
-Subject: [PATCH 5/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from spi code
-
----
- arch/mips/bcm63xx/dev-spi.c                        |  4 ---
- .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h     | 31 ----------------------
- 2 files changed, 35 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_regs.h>
--#ifdef BCMCPU_RUNTIME_DETECT
- /*
-  * register offsets
-  */
-@@ -41,9 +40,6 @@ static __init void bcm63xx_spi_regs_init
-               BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               bcm63xx_regs_spi = bcm6358_regs_spi;
- }
--#else
--static __init void bcm63xx_spi_regs_init(void) { }
--#endif
- static struct resource spi_resources[] = {
-       {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -30,26 +30,6 @@ enum bcm63xx_regs_spi {
-       SPI_RX_DATA,
- };
--#define __GEN_SPI_RSET_BASE(__cpu, __rset)                            \
--      case SPI_## __rset:                                             \
--              return SPI_## __cpu ##_## __rset;
--
--#define __GEN_SPI_RSET(__cpu)                                         \
--      switch (reg) {                                                  \
--      __GEN_SPI_RSET_BASE(__cpu, CMD)                                 \
--      __GEN_SPI_RSET_BASE(__cpu, INT_STATUS)                          \
--      __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST)                         \
--      __GEN_SPI_RSET_BASE(__cpu, INT_MASK)                            \
--      __GEN_SPI_RSET_BASE(__cpu, ST)                                  \
--      __GEN_SPI_RSET_BASE(__cpu, CLK_CFG)                             \
--      __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE)                           \
--      __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL)                            \
--      __GEN_SPI_RSET_BASE(__cpu, RX_TAIL)                             \
--      __GEN_SPI_RSET_BASE(__cpu, MSG_CTL)                             \
--      __GEN_SPI_RSET_BASE(__cpu, MSG_DATA)                            \
--      __GEN_SPI_RSET_BASE(__cpu, RX_DATA)                             \
--      }
--
- #define __GEN_SPI_REGS_TABLE(__cpu)                                   \
-       [SPI_CMD]               = SPI_## __cpu ##_CMD,                  \
-       [SPI_INT_STATUS]        = SPI_## __cpu ##_INT_STATUS,           \
-@@ -66,20 +46,9 @@ enum bcm63xx_regs_spi {
- static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
- {
--#ifdef BCMCPU_RUNTIME_DETECT
-       extern const unsigned long *bcm63xx_regs_spi;
-       return bcm63xx_regs_spi[reg];
--#else
--#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
--      __GEN_SPI_RSET(6348)
--#endif
--#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
--      defined(CONFIG_BCM63XX_CPU_6368)
--      __GEN_SPI_RSET(6358)
--#endif
--#endif
--      return 0;
- }
- #endif /* BCM63XX_DEV_SPI_H */
diff --git a/target/linux/brcm63xx/patches-3.13/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch b/target/linux/brcm63xx/patches-3.13/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
deleted file mode 100644 (file)
index 0dba2e2..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-From ed6c71de07ad042691ec02e9eb97375ddc91ed01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 13:45:22 +0100
-Subject: [PATCH 6/8] MIPS: BCM63XX: remove !RUNTIME_DETECT usage from enet
- code
-
----
- arch/mips/bcm63xx/dev-enet.c                       |  4 --
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    | 46 ----------------------
- 2 files changed, 50 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -14,7 +14,6 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
--#ifdef BCMCPU_RUNTIME_DETECT
- static const unsigned long bcm6348_regs_enetdmac[] = {
-       [ENETDMAC_CHANCFG]      = ENETDMAC_CHANCFG_REG,
-       [ENETDMAC_IR]           = ENETDMAC_IR_REG,
-@@ -43,9 +42,6 @@ static __init void bcm63xx_enetdmac_regs
-       else
-               bcm63xx_regs_enetdmac = bcm6348_regs_enetdmac;
- }
--#else
--static __init void bcm63xx_enetdmac_regs_init(void) { }
--#endif
- static struct resource shared_res[] = {
-       {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -112,55 +112,9 @@ enum bcm63xx_regs_enetdmac {
- static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
- {
--#ifdef BCMCPU_RUNTIME_DETECT
-       extern const unsigned long *bcm63xx_regs_enetdmac;
-       return bcm63xx_regs_enetdmac[reg];
--#else
--#ifdef CONFIG_BCM63XX_CPU_6345
--      switch (reg) {
--      case ENETDMAC_CHANCFG:
--              return ENETDMA_6345_CHANCFG_REG;
--      case ENETDMAC_IR:
--              return ENETDMA_6345_IR_REG;
--      case ENETDMAC_IRMASK:
--              return ENETDMA_6345_IRMASK_REG;
--      case ENETDMAC_MAXBURST:
--              return ENETDMA_6345_MAXBURST_REG;
--      case ENETDMAC_BUFALLOC:
--              return ENETDMA_6345_BUFALLOC_REG;
--      case ENETDMAC_RSTART:
--              return ENETDMA_6345_RSTART_REG;
--      case ENETDMAC_FC:
--              return ENETDMA_6345_FC_REG;
--      case ENETDMAC_LEN:
--              return ENETDMA_6345_LEN_REG;
--      }
--#endif
--#if defined(CONFIG_BCM63XX_CPU_6328) || \
--      defined(CONFIG_BCM63XX_CPU_6338) || \
--      defined(CONFIG_BCM63XX_CPU_6348) || \
--      defined(CONFIG_BCM63XX_CPU_6358) || \
--      defined(CONFIG_BCM63XX_CPU_6362) || \
--      defined(CONFIG_BCM63XX_CPU_6368)
--      switch (reg) {
--      case ENETDMAC_CHANCFG:
--              return ENETDMAC_CHANCFG_REG;
--      case ENETDMAC_IR:
--              return ENETDMAC_IR_REG;
--      case ENETDMAC_IRMASK:
--              return ENETDMAC_IRMASK_REG;
--      case ENETDMAC_MAXBURST:
--              return ENETDMAC_MAXBURST_REG;
--      case ENETDMAC_BUFALLOC:
--      case ENETDMAC_RSTART:
--      case ENETDMAC_FC:
--      case ENETDMAC_LEN:
--              return 0;
--      }
--#endif
--#endif
--      return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.13/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch b/target/linux/brcm63xx/patches-3.13/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
deleted file mode 100644 (file)
index 6316b8d..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 12c6957004d6770f4b34d59d8a3cafd5d8bfce15 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 3 Dec 2013 14:06:12 +0100
-Subject: [PATCH 7/8] MIPS: BCM63XX: remove !RUNTIME_DETECT in
- cpu-feature-overrides
-
-All three SoCs have in common they have a BMIPS32/BMIPS3300 CPU, so
-we can replace this as no SoC with BMIPS4350 support enabled.
----
- arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
-@@ -24,7 +24,7 @@
- #define cpu_has_smartmips             0
- #define cpu_has_vtag_icache           0
--#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
-+#if !defined(CONFIG_SYS_HAS_CPU_BMIPS4350)
- #define cpu_has_dc_aliases            0
- #endif
diff --git a/target/linux/brcm63xx/patches-3.13/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch b/target/linux/brcm63xx/patches-3.13/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
deleted file mode 100644 (file)
index e40cfa0..0000000
+++ /dev/null
@@ -1,199 +0,0 @@
-From 78c3d2e796a28ad55f6c2310a11ab22e91bb52fc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 2 Dec 2013 12:30:44 +0100
-Subject: [PATCH 8/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code for
- bcmcpu_get_id
-
-Use the same pattern as with get_*_cpu_type() to allow the compiler
-to remove code for non enabled devices.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          |  11 +--
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 120 +++++++----------------
- 2 files changed, 38 insertions(+), 93 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,9 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
--static u16 bcm63xx_cpu_id;
-+u16 bcm63xx_cpu_id __read_mostly;
-+EXPORT_SYMBOL(bcm63xx_cpu_id);
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -97,13 +99,6 @@ static const int bcm6368_irqs[] = {
- };
--u16 __bcm63xx_get_cpu_id(void)
--{
--      return bcm63xx_cpu_id;
--}
--
--EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
--
- u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -19,118 +19,68 @@
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
--u16 __bcm63xx_get_cpu_id(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-+static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+{
-+      switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM3368_CPU_ID
--# endif
--# define BCMCPU_IS_3368()     (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
--#else
--# define BCMCPU_IS_3368()     (0)
-+              case BCM3368_CPU_ID:
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6328_CPU_ID
--# endif
--# define BCMCPU_IS_6328()     (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
--#else
--# define BCMCPU_IS_6328()     (0)
-+              case BCM6328_CPU_ID:
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6338_CPU_ID
--# endif
--# define BCMCPU_IS_6338()     (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
--#else
--# define BCMCPU_IS_6338()     (0)
-+              case BCM6338_CPU_ID:
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6345_CPU_ID
--# endif
--# define BCMCPU_IS_6345()     (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
--#else
--# define BCMCPU_IS_6345()     (0)
-+              case BCM6345_CPU_ID:
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6348_CPU_ID
--# endif
--# define BCMCPU_IS_6348()     (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
--#else
--# define BCMCPU_IS_6348()     (0)
-+              case BCM6348_CPU_ID:
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6358_CPU_ID
--# endif
--# define BCMCPU_IS_6358()     (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
--#else
--# define BCMCPU_IS_6358()     (0)
-+              case BCM6358_CPU_ID:
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6362_CPU_ID
--# endif
--# define BCMCPU_IS_6362()     (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
--#else
--# define BCMCPU_IS_6362()     (0)
-+              case BCM6362_CPU_ID:
- #endif
--
- #ifdef CONFIG_BCM63XX_CPU_6368
--# ifdef bcm63xx_get_cpu_id
--#  undef bcm63xx_get_cpu_id
--#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
--#  define BCMCPU_RUNTIME_DETECT
--# else
--#  define bcm63xx_get_cpu_id()        BCM6368_CPU_ID
--# endif
--# define BCMCPU_IS_6368()     (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
--#else
--# define BCMCPU_IS_6368()     (0)
--#endif
--
--#ifndef bcm63xx_get_cpu_id
--#error "No CPU support configured"
-+              case BCM6368_CPU_ID:
- #endif
-+              break;
-+      default:
-+              unreachable();
-+      }
-+
-+      return cpu_id;
-+}
-+
-+extern u16 bcm63xx_cpu_id;
-+
-+static inline u16 __pure bcm63xx_get_cpu_id(void)
-+{
-+      const u16 cpu_id = bcm63xx_cpu_id;
-+
-+      return __bcm63xx_get_cpu_id(cpu_id);
-+}
-+
-+#define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
-+#define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
-+#define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-+#define BCMCPU_IS_6348()      (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
-+#define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
-+#define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
-+#define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.13/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch b/target/linux/brcm63xx/patches-3.13/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch
deleted file mode 100644 (file)
index f4d98c3..0000000
+++ /dev/null
@@ -1,42 +0,0 @@
-From 653dcc09407a695efb203337c6f72515d4c4ee43 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 21 Mar 2013 17:05:15 +0100
-Subject: [PATCH 29/53] MIPS: BCM63XX: rename __dispatch_internal to
- __dispatch_internal_32
-
-Make it follow the same naming convention as the other functions.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,7 +19,7 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--static void __dispatch_internal(void) __maybe_unused;
-+static void __dispatch_internal_32(void) __maybe_unused;
- static void __dispatch_internal_64(void) __maybe_unused;
- static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
-@@ -117,7 +117,7 @@ static void bcm63xx_init_irq(void)
-       }
-       if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal;
-+              dispatch_internal = __dispatch_internal_32;
-               internal_irq_mask = __internal_irq_mask_32;
-               internal_irq_unmask = __internal_irq_unmask_32;
-       } else {
-@@ -149,7 +149,7 @@ static inline void handle_internal(int i
-  * will resume the loop where it ended the last time we left this
-  * function.
-  */
--static void __dispatch_internal(void)
-+static void __dispatch_internal_32(void)
- {
-       u32 pending;
-       static int i;
diff --git a/target/linux/brcm63xx/patches-3.13/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch b/target/linux/brcm63xx/patches-3.13/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
deleted file mode 100644 (file)
index fb57939..0000000
+++ /dev/null
@@ -1,223 +0,0 @@
-From c28c639b031385ecf965eecf3bfb532e88044c89 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:52:53 +0100
-Subject: [PATCH 30/53] MIPS: BCM63XX: move bcm63xx_init_irq down
-
-Allows up to drop the prototypes from the top.
----
- arch/mips/bcm63xx/irq.c | 190 +++++++++++++++++++++++-------------------------
- 1 file changed, 92 insertions(+), 98 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,13 +19,6 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--static void __dispatch_internal_32(void) __maybe_unused;
--static void __dispatch_internal_64(void) __maybe_unused;
--static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
--static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
--static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
--static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
--
- static u32 irq_stat_addr, irq_mask_addr;
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
-@@ -35,97 +28,6 @@ static unsigned int ext_irq_cfg_reg1, ex
- static void (*internal_irq_mask)(unsigned int irq);
- static void (*internal_irq_unmask)(unsigned int irq);
--static void bcm63xx_init_irq(void)
--{
--      int irq_bits;
--
--      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
--
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM3368_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_3368_REG;
--              irq_mask_addr += PERF_IRQMASK_3368_REG;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
--              break;
--      case BCM6328_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6328_REG;
--              irq_mask_addr += PERF_IRQMASK_6328_REG;
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
--              break;
--      case BCM6338_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr += PERF_IRQMASK_6338_REG;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
--              break;
--      case BCM6345_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr += PERF_IRQMASK_6345_REG;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
--              break;
--      case BCM6348_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr += PERF_IRQMASK_6348_REG;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
--              break;
--      case BCM6358_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6358_REG;
--              irq_mask_addr += PERF_IRQMASK_6358_REG;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
--              break;
--      case BCM6362_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6362_REG;
--              irq_mask_addr += PERF_IRQMASK_6362_REG;
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
--              break;
--      case BCM6368_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6368_REG;
--              irq_mask_addr += PERF_IRQMASK_6368_REG;
--              irq_bits = 64;
--              ext_irq_count = 6;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
--              break;
--      default:
--              BUG();
--      }
--
--      if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal_32;
--              internal_irq_mask = __internal_irq_mask_32;
--              internal_irq_unmask = __internal_irq_unmask_32;
--      } else {
--              dispatch_internal = __dispatch_internal_64;
--              internal_irq_mask = __internal_irq_mask_64;
--              internal_irq_unmask = __internal_irq_unmask_64;
--      }
--}
- static inline u32 get_ext_irq_perf_reg(int irq)
- {
-@@ -451,6 +353,98 @@ static struct irqaction cpu_ext_cascade_
-       .flags          = IRQF_NO_THREAD,
- };
-+static void bcm63xx_init_irq(void)
-+{
-+      int irq_bits;
-+
-+      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
-+      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-+
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_3368_REG;
-+              irq_mask_addr += PERF_IRQMASK_3368_REG;
-+              irq_bits = 32;
-+              ext_irq_count = 4;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+              break;
-+      case BCM6328_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6328_REG;
-+              irq_mask_addr += PERF_IRQMASK_6328_REG;
-+              irq_bits = 64;
-+              ext_irq_count = 4;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+              break;
-+      case BCM6338_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6338_REG;
-+              irq_mask_addr += PERF_IRQMASK_6338_REG;
-+              irq_bits = 32;
-+              ext_irq_count = 4;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+              break;
-+      case BCM6345_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6345_REG;
-+              irq_mask_addr += PERF_IRQMASK_6345_REG;
-+              irq_bits = 32;
-+              ext_irq_count = 4;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+              break;
-+      case BCM6348_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6348_REG;
-+              irq_mask_addr += PERF_IRQMASK_6348_REG;
-+              irq_bits = 32;
-+              ext_irq_count = 4;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+              break;
-+      case BCM6358_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6358_REG;
-+              irq_mask_addr += PERF_IRQMASK_6358_REG;
-+              irq_bits = 32;
-+              ext_irq_count = 4;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+              break;
-+      case BCM6362_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6362_REG;
-+              irq_mask_addr += PERF_IRQMASK_6362_REG;
-+              irq_bits = 64;
-+              ext_irq_count = 4;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+              break;
-+      case BCM6368_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6368_REG;
-+              irq_mask_addr += PERF_IRQMASK_6368_REG;
-+              irq_bits = 64;
-+              ext_irq_count = 6;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
-+              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+              break;
-+      default:
-+              BUG();
-+      }
-+
-+      if (irq_bits == 32) {
-+              dispatch_internal = __dispatch_internal_32;
-+              internal_irq_mask = __internal_irq_mask_32;
-+              internal_irq_unmask = __internal_irq_unmask_32;
-+      } else {
-+              dispatch_internal = __dispatch_internal_64;
-+              internal_irq_mask = __internal_irq_mask_64;
-+              internal_irq_unmask = __internal_irq_unmask_64;
-+      }
-+}
-+
- void __init arch_init_irq(void)
- {
-       int i;
diff --git a/target/linux/brcm63xx/patches-3.13/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch b/target/linux/brcm63xx/patches-3.13/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
deleted file mode 100644 (file)
index f0311ce..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-From 01bf26c51b427e24ac69f604d33f7d9360a9e470 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 18 Apr 2013 21:14:49 +0200
-Subject: [PATCH 31/53] MIPS: BCM63XX: replace irq dispatch code with a generic
- version
-
-The generic version uses a variable length of u32 registers of u32/u64.
-This allows easier support for longer registers without having to rewrite
-verything.
-
-This "generic" version is not slower than the old version in the best case
-(= i == next set bit), and twice as fast in the worst case in 64 bits.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 130 +++++++++++++++++++++---------------------------
- 1 file changed, 56 insertions(+), 74 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -51,47 +51,65 @@ static inline void handle_internal(int i
-  * will resume the loop where it ended the last time we left this
-  * function.
-  */
--static void __dispatch_internal_32(void)
--{
--      u32 pending;
--      static int i;
--
--      pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
--
--      if (!pending)
--              return ;
--
--      while (1) {
--              int to_call = i;
--              i = (i + 1) & 0x1f;
--              if (pending & (1 << to_call)) {
--                      handle_internal(to_call);
--                      break;
--              }
--      }
-+#define BUILD_IPIC_INTERNAL(width)                                    \
-+void __dispatch_internal_##width(void)                                        \
-+{                                                                     \
-+      u32 pending[width / 32];                                        \
-+      unsigned int src, tgt;                                          \
-+      bool irqs_pending = false;                                      \
-+      static int i;                                                   \
-+                                                                      \
-+      /* read registers in reverse order */                           \
-+      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-+              u32 val;                                                \
-+                                                                      \
-+              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
-+              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
-+              pending[--tgt] = val;                                   \
-+                                                                      \
-+              if (val)                                                \
-+                      irqs_pending = true;                            \
-+      }                                                               \
-+                                                                      \
-+      if (!irqs_pending)                                              \
-+              return;                                                 \
-+                                                                      \
-+      while (1) {                                                     \
-+              int to_call = i;                                        \
-+                                                                      \
-+              i = (i + 1) & (width - 1);                              \
-+              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
-+                      handle_internal(to_call);                       \
-+                      break;                                          \
-+              }                                                       \
-+      }                                                               \
-+}                                                                     \
-+                                                                      \
-+static void __internal_irq_mask_##width(unsigned int irq)             \
-+{                                                                     \
-+      u32 val;                                                        \
-+      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-+      unsigned bit = irq & 0x1f;                                      \
-+                                                                      \
-+      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val &= ~(1 << bit);                                             \
-+      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+}                                                                     \
-+                                                                      \
-+static void __internal_irq_unmask_##width(unsigned int irq)           \
-+{                                                                     \
-+      u32 val;                                                        \
-+      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-+      unsigned bit = irq & 0x1f;                                      \
-+                                                                      \
-+      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val |= (1 << bit);                                              \
-+      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
- }
--static void __dispatch_internal_64(void)
--{
--      u64 pending;
--      static int i;
--
--      pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
--
--      if (!pending)
--              return ;
--
--      while (1) {
--              int to_call = i;
--
--              i = (i + 1) & 0x3f;
--              if (pending & (1ull << to_call)) {
--                      handle_internal(to_call);
--                      break;
--              }
--      }
--}
-+BUILD_IPIC_INTERNAL(32);
-+BUILD_IPIC_INTERNAL(64);
- asmlinkage void plat_irq_dispatch(void)
- {
-@@ -128,42 +146,6 @@ asmlinkage void plat_irq_dispatch(void)
-  * internal IRQs operations: only mask/unmask on PERF irq mask
-  * register.
-  */
--static void __internal_irq_mask_32(unsigned int irq)
--{
--      u32 mask;
--
--      mask = bcm_readl(irq_mask_addr);
--      mask &= ~(1 << irq);
--      bcm_writel(mask, irq_mask_addr);
--}
--
--static void __internal_irq_mask_64(unsigned int irq)
--{
--      u64 mask;
--
--      mask = bcm_readq(irq_mask_addr);
--      mask &= ~(1ull << irq);
--      bcm_writeq(mask, irq_mask_addr);
--}
--
--static void __internal_irq_unmask_32(unsigned int irq)
--{
--      u32 mask;
--
--      mask = bcm_readl(irq_mask_addr);
--      mask |= (1 << irq);
--      bcm_writel(mask, irq_mask_addr);
--}
--
--static void __internal_irq_unmask_64(unsigned int irq)
--{
--      u64 mask;
--
--      mask = bcm_readq(irq_mask_addr);
--      mask |= (1ull << irq);
--      bcm_writeq(mask, irq_mask_addr);
--}
--
- static void bcm63xx_internal_irq_mask(struct irq_data *d)
- {
-       internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
diff --git a/target/linux/brcm63xx/patches-3.13/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch b/target/linux/brcm63xx/patches-3.13/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch
deleted file mode 100644 (file)
index e53f230..0000000
+++ /dev/null
@@ -1,183 +0,0 @@
-From 1003fb4a5ee9fcff518f20eefdee1a9bf500af7e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 00:24:06 +0200
-Subject: [PATCH 32/53] MIPS: BCM63XX: append irq line number to
- irq_{stat,mask}*
-
-The SMP capable irq controllers have two interupt output pins which are
-controlled through separate registers, so make the variables arrays.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           | 51 ++++++++++++-----------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 16 +++----
- 2 files changed, 34 insertions(+), 33 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,7 +19,8 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--static u32 irq_stat_addr, irq_mask_addr;
-+static u32 irq_stat_addr[2];
-+static u32 irq_mask_addr[2];
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
-@@ -64,8 +65,8 @@ void __dispatch_internal_##width(void)
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-               u32 val;                                                \
-                                                                       \
--              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
--              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
-+              val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));  \
-+              val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32)); \
-               pending[--tgt] = val;                                   \
-                                                                       \
-               if (val)                                                \
-@@ -92,9 +93,9 @@ static void __internal_irq_mask_##width(
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-                                                                       \
--      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
-       val &= ~(1 << bit);                                             \
--      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
- }                                                                     \
-                                                                       \
- static void __internal_irq_unmask_##width(unsigned int irq)           \
-@@ -103,9 +104,9 @@ static void __internal_irq_unmask_##widt
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-                                                                       \
--      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
-       val |= (1 << bit);                                              \
--      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
- }
- BUILD_IPIC_INTERNAL(32);
-@@ -339,20 +340,20 @@ static void bcm63xx_init_irq(void)
- {
-       int irq_bits;
--      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-+      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
-+      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_3368_REG;
--              irq_mask_addr += PERF_IRQMASK_3368_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
-+              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-       case BCM6328_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6328_REG;
--              irq_mask_addr += PERF_IRQMASK_6328_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
-+              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -361,29 +362,29 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-       case BCM6338_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr += PERF_IRQMASK_6338_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
-+              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-               break;
-       case BCM6345_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr += PERF_IRQMASK_6345_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
-+              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-               break;
-       case BCM6348_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr += PERF_IRQMASK_6348_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
-+              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-               break;
-       case BCM6358_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6358_REG;
--              irq_mask_addr += PERF_IRQMASK_6358_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
-+              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
-               irq_bits = 32;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -392,8 +393,8 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-               break;
-       case BCM6362_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6362_REG;
--              irq_mask_addr += PERF_IRQMASK_6362_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
-+              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -402,8 +403,8 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-               break;
-       case BCM6368_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6368_REG;
--              irq_mask_addr += PERF_IRQMASK_6368_REG;
-+              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
-+              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
-               irq_bits = 64;
-               ext_irq_count = 6;
-               is_ext_irq_cascaded = 1;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -215,23 +215,23 @@
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG         0xc
--#define PERF_IRQMASK_6328_REG         0x20
-+#define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
- #define PERF_IRQMASK_6348_REG         0xc
--#define PERF_IRQMASK_6358_REG         0xc
--#define PERF_IRQMASK_6362_REG         0x20
--#define PERF_IRQMASK_6368_REG         0x20
-+#define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
-+#define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
--#define PERF_IRQSTAT_6328_REG         0x28
-+#define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
- #define PERF_IRQSTAT_6348_REG         0x10
--#define PERF_IRQSTAT_6358_REG         0x10
--#define PERF_IRQSTAT_6362_REG         0x28
--#define PERF_IRQSTAT_6368_REG         0x28
-+#define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
-+#define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
diff --git a/target/linux/brcm63xx/patches-3.13/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch b/target/linux/brcm63xx/patches-3.13/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
deleted file mode 100644 (file)
index a21137f..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From 842f213228e6fc9fd6cca01ab5128623112aa7a9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 00:31:29 +0200
-Subject: [PATCH 33/53] MIPS: BCM63XX: populate irq_{stat,mask}_addr for second
- pin
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -342,11 +342,15 @@ static void bcm63xx_init_irq(void)
-       irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
-       irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
-+      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
-               irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
-+              irq_stat_addr[1] = 0;
-+              irq_stat_addr[1] = 0;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-@@ -354,6 +358,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6328_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
-               irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
-+              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
-+              irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -364,6 +370,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6338_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
-               irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
-+              irq_stat_addr[1] = 0;
-+              irq_mask_addr[1] = 0;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-@@ -371,6 +379,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6345_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
-               irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
-+              irq_stat_addr[1] = 0;
-+              irq_mask_addr[1] = 0;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-@@ -378,6 +388,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6348_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
-               irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
-+              irq_stat_addr[1] = 0;
-+              irq_mask_addr[1] = 0;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-@@ -385,6 +397,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6358_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
-               irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
-+              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
-+              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
-               irq_bits = 32;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -395,6 +409,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6362_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
-               irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
-+              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
-+              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -405,6 +421,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6368_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
-               irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
-+              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
-+              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
-               irq_bits = 64;
-               ext_irq_count = 6;
-               is_ext_irq_cascaded = 1;
diff --git a/target/linux/brcm63xx/patches-3.13/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch b/target/linux/brcm63xx/patches-3.13/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch
deleted file mode 100644 (file)
index 1b8921c..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From a33bb660c712447ba8b561109cda6734954a6efa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 11:21:16 +0200
-Subject: [PATCH 34/53] MIPS: BCM63XX: add pin argument to dispatch internal
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
- 1 file changed, 10 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,9 +19,10 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
-+
- static u32 irq_stat_addr[2];
- static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(void);
-+static void (*dispatch_internal)(int pin);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
-@@ -54,19 +55,20 @@ static inline void handle_internal(int i
-  */
- #define BUILD_IPIC_INTERNAL(width)                                    \
--void __dispatch_internal_##width(void)                                        \
-+void __dispatch_internal_##width(int pin)                             \
- {                                                                     \
-       u32 pending[width / 32];                                        \
-       unsigned int src, tgt;                                          \
-       bool irqs_pending = false;                                      \
--      static int i;                                                   \
-+      static int i[2];                                                \
-+      int *next = &i[pin];                                            \
-                                                                       \
-       /* read registers in reverse order */                           \
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-               u32 val;                                                \
-                                                                       \
--              val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));  \
--              val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32)); \
-+              val = bcm_readl(irq_stat_addr[pin] + src * sizeof(u32)); \
-+              val &= bcm_readl(irq_mask_addr[pin] + src * sizeof(u32)); \
-               pending[--tgt] = val;                                   \
-                                                                       \
-               if (val)                                                \
-@@ -77,9 +79,9 @@ void __dispatch_internal_##width(void)
-               return;                                                 \
-                                                                       \
-       while (1) {                                                     \
--              int to_call = i;                                        \
-+              int to_call = *next;                                    \
-                                                                       \
--              i = (i + 1) & (width - 1);                              \
-+              *next = (*next + 1) & (width - 1);                      \
-               if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
-                       handle_internal(to_call);                       \
-                       break;                                          \
-@@ -129,7 +131,7 @@ asmlinkage void plat_irq_dispatch(void)
-               if (cause & CAUSEF_IP1)
-                       do_IRQ(1);
-               if (cause & CAUSEF_IP2)
--                      dispatch_internal();
-+                      dispatch_internal(0);
-               if (!is_ext_irq_cascaded) {
-                       if (cause & CAUSEF_IP3)
-                               do_IRQ(IRQ_EXT_0);
diff --git a/target/linux/brcm63xx/patches-3.13/324-MIPS-BCM63XX-protect-irq-register-accesses.patch b/target/linux/brcm63xx/patches-3.13/324-MIPS-BCM63XX-protect-irq-register-accesses.patch
deleted file mode 100644 (file)
index c38137d..0000000
+++ /dev/null
@@ -1,158 +0,0 @@
-From 85257b702e1d4c6dcc839c737833c42ca53bae93 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 21 Apr 2013 15:38:56 +0200
-Subject: [PATCH 35/53] MIPS: BCM63XX: protect irq register accesses
-
----
- arch/mips/bcm63xx/irq.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -12,6 +12,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/irq.h>
-+#include <linux/spinlock.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -20,6 +21,9 @@
- #include <bcm63xx_irq.h>
-+static DEFINE_SPINLOCK(ipic_lock);
-+static DEFINE_SPINLOCK(epic_lock);
-+
- static u32 irq_stat_addr[2];
- static u32 irq_mask_addr[2];
- static void (*dispatch_internal)(int pin);
-@@ -62,8 +66,10 @@ void __dispatch_internal_##width(int pin
-       bool irqs_pending = false;                                      \
-       static int i[2];                                                \
-       int *next = &i[pin];                                            \
-+      unsigned long flags;                                            \
-                                                                       \
-       /* read registers in reverse order */                           \
-+      spin_lock_irqsave(&ipic_lock, flags);                           \
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-               u32 val;                                                \
-                                                                       \
-@@ -74,6 +80,7 @@ void __dispatch_internal_##width(int pin
-               if (val)                                                \
-                       irqs_pending = true;                            \
-       }                                                               \
-+      spin_unlock_irqrestore(&ipic_lock, flags);                      \
-                                                                       \
-       if (!irqs_pending)                                              \
-               return;                                                 \
-@@ -94,10 +101,13 @@ static void __internal_irq_mask_##width(
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-+      unsigned long flags;                                            \
-                                                                       \
-+      spin_lock_irqsave(&ipic_lock, flags);                           \
-       val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
-       val &= ~(1 << bit);                                             \
-       bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
-+      spin_unlock_irqrestore(&ipic_lock, flags);                      \
- }                                                                     \
-                                                                       \
- static void __internal_irq_unmask_##width(unsigned int irq)           \
-@@ -105,10 +115,13 @@ static void __internal_irq_unmask_##widt
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-+      unsigned long flags;                                            \
-                                                                       \
-+      spin_lock_irqsave(&ipic_lock, flags);                           \
-       val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
-       val |= (1 << bit);                                              \
-       bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
-+      spin_unlock_irqrestore(&ipic_lock, flags);                      \
- }
- BUILD_IPIC_INTERNAL(32);
-@@ -167,8 +180,10 @@ static void bcm63xx_external_irq_mask(st
- {
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-+      unsigned long flags;
-       regaddr = get_ext_irq_perf_reg(irq);
-+      spin_lock_irqsave(&epic_lock, flags);
-       reg = bcm_perf_readl(regaddr);
-       if (BCMCPU_IS_6348())
-@@ -177,6 +192,8 @@ static void bcm63xx_external_irq_mask(st
-               reg &= ~EXTIRQ_CFG_MASK(irq % 4);
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
-+
-       if (is_ext_irq_cascaded)
-               internal_irq_mask(irq + ext_irq_start);
- }
-@@ -185,8 +202,10 @@ static void bcm63xx_external_irq_unmask(
- {
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-+      unsigned long flags;
-       regaddr = get_ext_irq_perf_reg(irq);
-+      spin_lock_irqsave(&epic_lock, flags);
-       reg = bcm_perf_readl(regaddr);
-       if (BCMCPU_IS_6348())
-@@ -195,6 +214,7 @@ static void bcm63xx_external_irq_unmask(
-               reg |= EXTIRQ_CFG_MASK(irq % 4);
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
-       if (is_ext_irq_cascaded)
-               internal_irq_unmask(irq + ext_irq_start);
-@@ -204,8 +224,10 @@ static void bcm63xx_external_irq_clear(s
- {
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-+      unsigned long flags;
-       regaddr = get_ext_irq_perf_reg(irq);
-+      spin_lock_irqsave(&epic_lock, flags);
-       reg = bcm_perf_readl(regaddr);
-       if (BCMCPU_IS_6348())
-@@ -214,6 +236,7 @@ static void bcm63xx_external_irq_clear(s
-               reg |= EXTIRQ_CFG_CLEAR(irq % 4);
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
- }
- static int bcm63xx_external_irq_set_type(struct irq_data *d,
-@@ -222,6 +245,7 @@ static int bcm63xx_external_irq_set_type
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-       int levelsense, sense, bothedge;
-+      unsigned long flags;
-       flow_type &= IRQ_TYPE_SENSE_MASK;
-@@ -256,6 +280,7 @@ static int bcm63xx_external_irq_set_type
-       }
-       regaddr = get_ext_irq_perf_reg(irq);
-+      spin_lock_irqsave(&epic_lock, flags);
-       reg = bcm_perf_readl(regaddr);
-       irq %= 4;
-@@ -300,6 +325,7 @@ static int bcm63xx_external_irq_set_type
-       }
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
-       irqd_set_trigger_type(d, flow_type);
-       if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
diff --git a/target/linux/brcm63xx/patches-3.13/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch b/target/linux/brcm63xx/patches-3.13/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
deleted file mode 100644 (file)
index 189965a..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From df6661d1b5c001eb91ce07f364fd5b6468fd6f99 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 12:03:15 +0200
-Subject: [PATCH 36/53] MIPS: BCM63XX: wire up the second cpu's irq line
-
----
- arch/mips/bcm63xx/irq.c | 44 +++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 37 insertions(+), 7 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -102,11 +102,17 @@ static void __internal_irq_mask_##width(
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-       unsigned long flags;                                            \
-+      int cpu;                                                        \
-                                                                       \
-       spin_lock_irqsave(&ipic_lock, flags);                           \
--      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
--      val &= ~(1 << bit);                                             \
--      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
-+      for_each_present_cpu(cpu) {                                     \
-+              if (!irq_mask_addr[cpu])                                \
-+                      break;                                          \
-+                                                                      \
-+              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
-+              val &= ~(1 << bit);                                     \
-+              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
-+      }                                                               \
-       spin_unlock_irqrestore(&ipic_lock, flags);                      \
- }                                                                     \
-                                                                       \
-@@ -116,11 +122,20 @@ static void __internal_irq_unmask_##widt
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-       unsigned long flags;                                            \
-+      int cpu;                                                        \
-                                                                       \
-       spin_lock_irqsave(&ipic_lock, flags);                           \
--      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
--      val |= (1 << bit);                                              \
--      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
-+      for_each_present_cpu(cpu) {                                     \
-+              if (!irq_mask_addr[cpu])                                \
-+                      break;                                          \
-+                                                                      \
-+              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
-+              if (cpu_online(cpu))                                    \
-+                      val |= (1 << bit);                              \
-+              else                                                    \
-+                      val &= ~(1 << bit);                             \
-+              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
-+      }                                                               \
-       spin_unlock_irqrestore(&ipic_lock, flags);                      \
- }
-@@ -145,7 +160,10 @@ asmlinkage void plat_irq_dispatch(void)
-                       do_IRQ(1);
-               if (cause & CAUSEF_IP2)
-                       dispatch_internal(0);
--              if (!is_ext_irq_cascaded) {
-+              if (is_ext_irq_cascaded) {
-+                      if (cause & CAUSEF_IP3)
-+                              dispatch_internal(1);
-+              } else {
-                       if (cause & CAUSEF_IP3)
-                               do_IRQ(IRQ_EXT_0);
-                       if (cause & CAUSEF_IP4)
-@@ -358,6 +376,14 @@ static struct irqaction cpu_ip2_cascade_
-       .flags          = IRQF_NO_THREAD,
- };
-+#ifdef CONFIG_SMP
-+static struct irqaction cpu_ip3_cascade_action = {
-+      .handler        = no_action,
-+      .name           = "cascade_ip3",
-+      .flags          = IRQF_NO_THREAD,
-+};
-+#endif
-+
- static struct irqaction cpu_ext_cascade_action = {
-       .handler        = no_action,
-       .name           = "cascade_extirq",
-@@ -494,4 +520,8 @@ void __init arch_init_irq(void)
-       }
-       setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
-+#ifdef CONFIG_SMP
-+      if (is_ext_irq_cascaded)
-+              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
-+#endif
- }
diff --git a/target/linux/brcm63xx/patches-3.13/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch b/target/linux/brcm63xx/patches-3.13/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
deleted file mode 100644 (file)
index 468cbc3..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-From b665117faa0dfde70689502fc420d72bbf8e6bd4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 30 Apr 2013 11:26:53 +0200
-Subject: [PATCH 37/53] MIPS: BCM63XX: use irq_desc as argument for (un)mask
-
-In preparation for applying affinity, use the irq descriptor as the
-argument for (un)mask.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
- 1 file changed, 10 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -31,8 +31,8 @@ static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
- static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(unsigned int irq);
--static void (*internal_irq_unmask)(unsigned int irq);
-+static void (*internal_irq_mask)(struct irq_data *d);
-+static void (*internal_irq_unmask)(struct irq_data *d);
- static inline u32 get_ext_irq_perf_reg(int irq)
-@@ -96,9 +96,10 @@ void __dispatch_internal_##width(int pin
-       }                                                               \
- }                                                                     \
-                                                                       \
--static void __internal_irq_mask_##width(unsigned int irq)             \
-+static void __internal_irq_mask_##width(struct irq_data *d)           \
- {                                                                     \
-       u32 val;                                                        \
-+      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-       unsigned long flags;                                            \
-@@ -116,9 +117,10 @@ static void __internal_irq_mask_##width(
-       spin_unlock_irqrestore(&ipic_lock, flags);                      \
- }                                                                     \
-                                                                       \
--static void __internal_irq_unmask_##width(unsigned int irq)           \
-+static void __internal_irq_unmask_##width(struct irq_data *d)         \
- {                                                                     \
-       u32 val;                                                        \
-+      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-       unsigned long flags;                                            \
-@@ -182,12 +184,12 @@ asmlinkage void plat_irq_dispatch(void)
-  */
- static void bcm63xx_internal_irq_mask(struct irq_data *d)
- {
--      internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
-+      internal_irq_mask(d);
- }
- static void bcm63xx_internal_irq_unmask(struct irq_data *d)
- {
--      internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
-+      internal_irq_unmask(d);
- }
- /*
-@@ -213,7 +215,7 @@ static void bcm63xx_external_irq_mask(st
-       spin_unlock_irqrestore(&epic_lock, flags);
-       if (is_ext_irq_cascaded)
--              internal_irq_mask(irq + ext_irq_start);
-+              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
- }
- static void bcm63xx_external_irq_unmask(struct irq_data *d)
-@@ -235,7 +237,7 @@ static void bcm63xx_external_irq_unmask(
-       spin_unlock_irqrestore(&epic_lock, flags);
-       if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq + ext_irq_start);
-+              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
- }
- static void bcm63xx_external_irq_clear(struct irq_data *d)
diff --git a/target/linux/brcm63xx/patches-3.13/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch b/target/linux/brcm63xx/patches-3.13/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
deleted file mode 100644 (file)
index 9394e23..0000000
+++ /dev/null
@@ -1,111 +0,0 @@
-From 9249f2f6a309e3f45c35d16decdcc5b2cadcadb8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 12:06:03 +0200
-Subject: [PATCH 38/53] MIPS: BCM63XX: allow setting affinity for IPIC
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c | 43 +++++++++++++++++++++++++++++++++++++------
- 1 file changed, 37 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -32,7 +32,7 @@ static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
- static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
- static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d);
-+static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
- static inline u32 get_ext_irq_perf_reg(int irq)
-@@ -51,6 +51,20 @@ static inline void handle_internal(int i
-               do_IRQ(intbit + IRQ_INTERNAL_BASE);
- }
-+static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
-+                                   const struct cpumask *m)
-+{
-+      bool enable = cpu_online(cpu);
-+#ifdef CONFIG_SMP
-+
-+      if (m)
-+              enable &= cpu_isset(cpu, *m);
-+      else if (irqd_affinity_was_set(d))
-+              enable &= cpu_isset(cpu, *d->affinity);
-+#endif
-+      return enable;
-+}
-+
- /*
-  * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-  * prioritize any interrupt relatively to another. the static counter
-@@ -117,7 +131,8 @@ static void __internal_irq_mask_##width(
-       spin_unlock_irqrestore(&ipic_lock, flags);                      \
- }                                                                     \
-                                                                       \
--static void __internal_irq_unmask_##width(struct irq_data *d)         \
-+static void __internal_irq_unmask_##width(struct irq_data *d,         \
-+                                        const struct cpumask *m)      \
- {                                                                     \
-       u32 val;                                                        \
-       unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
-@@ -132,7 +147,7 @@ static void __internal_irq_unmask_##widt
-                       break;                                          \
-                                                                       \
-               val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              if (cpu_online(cpu))                                    \
-+              if (enable_irq_for_cpu(cpu, d, m))                      \
-                       val |= (1 << bit);                              \
-               else                                                    \
-                       val &= ~(1 << bit);                             \
-@@ -189,7 +204,7 @@ static void bcm63xx_internal_irq_mask(st
- static void bcm63xx_internal_irq_unmask(struct irq_data *d)
- {
--      internal_irq_unmask(d);
-+      internal_irq_unmask(d, NULL);
- }
- /*
-@@ -237,7 +252,8 @@ static void bcm63xx_external_irq_unmask(
-       spin_unlock_irqrestore(&epic_lock, flags);
-       if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
-+              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
-+                                  NULL);
- }
- static void bcm63xx_external_irq_clear(struct irq_data *d)
-@@ -356,6 +372,18 @@ static int bcm63xx_external_irq_set_type
-       return IRQ_SET_MASK_OK_NOCOPY;
- }
-+#ifdef CONFIG_SMP
-+static int bcm63xx_internal_set_affinity(struct irq_data *data,
-+                                       const struct cpumask *dest,
-+                                       bool force)
-+{
-+      if (!irqd_irq_disabled(data))
-+              internal_irq_unmask(data, dest);
-+
-+      return 0;
-+}
-+#endif
-+
- static struct irq_chip bcm63xx_internal_irq_chip = {
-       .name           = "bcm63xx_ipic",
-       .irq_mask       = bcm63xx_internal_irq_mask,
-@@ -523,7 +551,10 @@ void __init arch_init_irq(void)
-       setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
- #ifdef CONFIG_SMP
--      if (is_ext_irq_cascaded)
-+      if (is_ext_irq_cascaded) {
-               setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
-+              bcm63xx_internal_irq_chip.irq_set_affinity =
-+                      bcm63xx_internal_set_affinity;
-+      }
- #endif
- }
diff --git a/target/linux/brcm63xx/patches-3.13/328-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-3.13/328-cfe_simplify_detection.patch
deleted file mode 100644 (file)
index e05c91d..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -1,6 +1,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- void board_prom_init(void);
-@@ -9,4 +11,8 @@ void board_setup(void);
- int board_register_devices(void);
-+static inline bool bcm63xx_is_cfe_present(void) {
-+      return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-3.13/329-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-3.13/329-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644 (file)
index dedd728..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,7 +35,7 @@
- #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <linux/bcm963xx_tag.h>
--#include <asm/mach-bcm63xx/board_bcm963xx.h>
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- #define BCM63XX_EXTENDED_SIZE 0xBFC00000      /* Extended flash address */
-@@ -43,30 +43,6 @@
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--      char buf[9];
--      int ret;
--      size_t retlen;
--
--      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      if (ret)
--              return ret;
--
--      if (strncmp("cfe-v", buf, 5) == 0)
--              return 0;
--
--      /* very old CFE's do not have the cfe-v string, so check for magic */
--      ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
-                                       struct mtd_partition **pparts,
-                                       struct mtd_part_parser_data *data)
-@@ -85,7 +61,7 @@ static int bcm63xx_parse_cfe_partitions(
-       u32 computed_crc;
-       bool rootfs_first = false;
--      if (bcm63xx_detect_cfe(master))
-+      if (!bcm63xx_is_cfe_present())
-               return -EINVAL;
-       cfe_erasesize = max_t(uint32_t, master->erasesize,
diff --git a/target/linux/brcm63xx/patches-3.13/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-3.13/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644 (file)
index 2cf02f6..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- };
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+      return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
-@@ -332,6 +341,7 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-       switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -19,6 +19,7 @@
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-@@ -82,6 +83,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_3368() \
-+      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-3.13/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-3.13/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644 (file)
index 0ffc5bd..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From 9cd8b4a2ee9d0e6a5b91845bdd6f4b7e114fc8c4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 41/53] MIPS: BCM63XX: define variant id field
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -9,6 +9,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT                       8
-+#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
- #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/brcm63xx/patches-3.13/332-MIPS-BCM63XX-detect-bcm6328-variants.patch b/target/linux/brcm63xx/patches-3.13/332-MIPS-BCM63XX-detect-bcm6328-variants.patch
deleted file mode 100644 (file)
index 4eb5234..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From 6c8d94aaf5e2f0a3327e4f69ccd980bd5617f925 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 42/53] MIPS: BCM63XX: detect bcm6328 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -304,6 +304,7 @@ void __init bcm63xx_cpu_init(void)
-       struct cpuinfo_mips *c = &current_cpu_data;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-       chipid_reg = 0;
-@@ -343,6 +344,7 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -352,6 +354,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6328_CPU_ID:
-               bcm63xx_regs_base = bcm6328_regs_base;
-               bcm63xx_irqs = bcm6328_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+              else if (varid == 3)
-+                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
-               break;
-       case BCM6338_CPU_ID:
-               bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,8 @@
-  */
- #define BCM3368_CPU_ID                0x3368
- #define BCM6328_CPU_ID                0x6328
-+#define BCM63281_CPU_ID               0x63281
-+#define BCM63283_CPU_ID               0x63283
- #define BCM6338_CPU_ID                0x6338
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
-@@ -85,8 +87,10 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
-       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-3.13/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-3.13/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644 (file)
index 145d18f..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From dc48adb13a99086d1f484d3379a918626c5b1658 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 43/53] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -382,6 +382,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6362_CPU_ID:
-               bcm63xx_regs_base = bcm6362_regs_base;
-               bcm63xx_irqs = bcm6362_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+              else if (varid == 2)
-+                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
-               break;
-       case BCM6368_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -17,6 +17,7 @@
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
- #define BCM6358_CPU_ID                0x6358
-+#define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-@@ -99,6 +100,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
-       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-3.13/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch b/target/linux/brcm63xx/patches-3.13/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch
deleted file mode 100644 (file)
index 19539cf..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-From 311b0246d51e09d13464e76abb0e231c855dd333 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 44/53] MIPS: BCM63XX: add support for BCM6368 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -392,8 +392,12 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       case BCM6368_CPU_ID:
-+      case BCM6369_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
-               bcm63xx_irqs = bcm6368_irqs;
-+
-+              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+              bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-+#define BCM6369_CPU_ID                0x6369
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -106,6 +107,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.13/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-3.13/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644 (file)
index 3230add..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,7 +41,7 @@
-                                       BCM_CB_MEM_SIZE - 1)
- #define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
-                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/brcm63xx/patches-3.13/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-3.13/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644 (file)
index d6eb54d..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,10 +40,10 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
--#define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
--                                      BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-+                                      BCM_PCIE_MEM_SIZE_6328 - 1)
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- static struct resource bcm_pcie_mem_resource = {
-       .name   = "bcm63xx PCIe memory space",
--      .start  = BCM_PCIE_MEM_BASE_PA,
--      .end    = BCM_PCIE_MEM_END_PA,
-+      .start  = 0,
-+      .end    = 0,
-       .flags  = IORESOURCE_MEM,
- };
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
-       /* set bar0 to little endian */
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-       val |= BASEMASK_REMAP_EN;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-       register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      }
-+
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.13/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-3.13/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644 (file)
index 5b641a0..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- static u32 bcm63xx_cpu_variant __read_mostly;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -27,7 +27,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
-       switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -69,11 +69,11 @@ static inline u16 __pure __bcm63xx_get_c
-       return cpu_id;
- }
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--      const u16 cpu_id = bcm63xx_cpu_id;
-+      const u32 cpu_id = bcm63xx_cpu_id;
-       return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/brcm63xx/patches-3.13/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-3.13/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644 (file)
index 9132e42..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -1,10 +1,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- #define IRQ_INTERNAL_BASE             8
--#define IRQ_EXTERNAL_BASE             100
-+#define NR_INTERNAL_IRQS              128
-+#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -1,7 +1,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- #endif
diff --git a/target/linux/brcm63xx/patches-3.13/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.13/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 9c5967f..0000000
+++ /dev/null
@@ -1,769 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -60,6 +60,11 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+      bool "support 63268 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-+      select HW_HAS_PCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -825,7 +825,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk,
-                               CKCTL_6368_SWPKT_USB_EN |
-                               CKCTL_6368_SWPKT_SAR_EN,
-                               enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
-       else
-               return;
-@@ -177,6 +179,8 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-       else
-               return;
-@@ -199,6 +203,8 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
-       else
-               return;
-@@ -225,9 +231,13 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6358_SPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_SPI_EN;
--      else
--              /* BCMCPU_IS_6368 */
-+      else if (BCMCPU_IS_6368())
-               mask = CKCTL_6368_SPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_SPI_EN;
-+      else
-+              return;
-+
-       bcm_hwclock_set(mask, enable);
- }
-@@ -246,6 +256,8 @@ static void hsspi_set(struct clk *clk, i
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_HSSPI_EN;
-       else
-               return;
-@@ -307,6 +319,8 @@ static void pcie_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- static struct clk clk_pcie = {
-@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev,
-               return &clk_periph;
-       if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
-               return &clk_pcm;
--      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
-+      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
-+          !strcmp(id, "ipsec"))
-               return &clk_ipsec;
--      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
-+      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-+          !strcmp(id, "pcie"))
-               return &clk_pcie;
-       return ERR_PTR(-ENOENT);
- }
-@@ -411,6 +427,7 @@ static int __init bcm63xx_clk_init(void)
-               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-               break;
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-               break;
-       }
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- };
-+static const unsigned long bcm63268_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
-       return bcm63xx_cpu_variant;
-@@ -251,6 +260,27 @@ static unsigned int detect_cpu_clock(voi
-               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
-       }
-+      case BCM63268_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+                              STRAPBUS_63268_FCVO_SHIFT;
-+              switch (mips_pll_fcvo) {
-+              case 0x3:
-+              case 0xe:
-+                      return 320000000;
-+              case 0xa:
-+                      return 333000000;
-+              case 0x2:
-+              case 0xb:
-+              case 0xf:
-+                      return 400000000;
-+              default:
-+                      return 0;
-+              }
-+      }
-       default:
-               BUG();
-@@ -265,7 +295,7 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-       if (BCMCPU_IS_6345()) {
-@@ -304,6 +334,7 @@ void __init bcm63xx_cpu_init(void)
-       struct cpuinfo_mips *c = &current_cpu_data;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      bool long_chipid = false;
-       u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-@@ -325,6 +356,9 @@ void __init bcm63xx_cpu_init(void)
-               case 0x10:
-                       chipid_reg = BCM_6345_PERF_BASE;
-                       break;
-+              case 0x80:
-+                      long_chipid = true;
-+                      /* fall-through */
-               default:
-                       chipid_reg = BCM_6368_PERF_BASE;
-                       break;
-@@ -332,6 +366,7 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       }
-+
-       /*
-        * really early to panic, but delaying panic would not help since we
-        * will never get any working console
-@@ -341,10 +376,17 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
--      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+      if (long_chipid) {
-+              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+      } else {
-+              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      }
-+
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -399,6 +441,15 @@ void __init bcm63xx_cpu_init(void)
-               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-               bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-+      case BCM63168_CPU_ID:
-+      case BCM63169_CPU_ID:
-+      case BCM63268_CPU_ID:
-+      case BCM63269_CPU_ID:
-+              bcm63xx_regs_base = bcm63268_regs_base;
-+              bcm63xx_irqs = bcm63268_irqs;
-+
-+              bcm63xx_cpu_id = BCM63268_CPU_ID;
-+              break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
-               break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
-               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-                       return BCM63XX_FLASH_TYPE_PARALLEL;
-               }
-+      case BCM63268_CPU_ID:
-+              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+                      return BCM63XX_FLASH_TYPE_SERIAL;
-+              else
-+                      return BCM63XX_FLASH_TYPE_NAND;
-       default:
-               return -EINVAL;
-       }
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-               bcm63xx_regs_spi = bcm6348_regs_spi;
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
--              BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+              BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               bcm63xx_regs_spi = bcm6358_regs_spi;
- }
-@@ -85,7 +85,7 @@ int __init bcm63xx_spi_register(void)
-       }
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368()) {
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-               spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-               spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -158,6 +158,7 @@ static void __internal_irq_unmask_##widt
- BUILD_IPIC_INTERNAL(32);
- BUILD_IPIC_INTERNAL(64);
-+BUILD_IPIC_INTERNAL(128);
- asmlinkage void plat_irq_dispatch(void)
- {
-@@ -343,6 +344,7 @@ static int bcm63xx_external_irq_set_type
-       case BCM6358_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-+      case BCM63268_CPU_ID:
-               if (levelsense)
-                       reg |= EXTIRQ_CFG_LEVELSENSE(irq);
-               else
-@@ -515,6 +517,18 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
-               ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-               break;
-+      case BCM63268_CPU_ID:
-+              irq_stat_addr[0] += PERF_IRQSTAT_63268_REG(0);
-+              irq_mask_addr[0] += PERF_IRQMASK_63268_REG(0);
-+              irq_stat_addr[1] += PERF_IRQSTAT_63268_REG(1);
-+              irq_mask_addr[1] += PERF_IRQMASK_63268_REG(1);
-+              irq_bits = 128;
-+              ext_irq_count = 4;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_63268_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_63268_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_63268;
-+              break;
-       default:
-               BUG();
-       }
-@@ -523,10 +537,14 @@ static void bcm63xx_init_irq(void)
-               dispatch_internal = __dispatch_internal_32;
-               internal_irq_mask = __internal_irq_mask_32;
-               internal_irq_unmask = __internal_irq_unmask_32;
--      } else {
-+      } else if (irq_bits == 64) {
-               dispatch_internal = __dispatch_internal_64;
-               internal_irq_mask = __internal_irq_mask_64;
-               internal_irq_unmask = __internal_irq_unmask_64;
-+      } else {
-+              dispatch_internal = __dispatch_internal_128;
-+              internal_irq_mask = __internal_irq_mask_128;
-+              internal_irq_unmask = __internal_irq_unmask_128;
-       }
- }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -125,6 +125,20 @@
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET   0
-+#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL    0
-+#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY   0
-+#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI    0
-+#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
-+                               SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(6368)
- };
-+static const u32 bcm63268_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
-@@ -182,6 +200,9 @@ static int __init bcm63xx_reset_bits_ini
-       } else if (BCMCPU_IS_6368()) {
-               reset_reg = PERF_SOFTRESET_6368_REG;
-               bcm63xx_reset_bits = bcm6368_reset_bits;
-+      } else if (BCMCPU_IS_63268()) {
-+              reset_reg = PERF_SOFTRESET_63268_REG;
-+              bcm63xx_reset_bits = bcm63268_reset_bits;
-       }
-       return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,10 @@
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
- #define BCM6369_CPU_ID                0x6369
-+#define BCM63168_CPU_ID               0x63168
-+#define BCM63169_CPU_ID               0x63169
-+#define BCM63268_CPU_ID               0x63268
-+#define BCM63269_CPU_ID               0x63269
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -61,6 +65,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
-               case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+              case BCM63268_CPU_ID:
-+#endif
-               break;
-       default:
-               unreachable();
-@@ -86,6 +94,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -109,6 +118,14 @@ static inline u32 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
-       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -573,6 +590,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE             (0xb0004180)
- #define BCM_6368_MISC_BASE            (0xdeadbeef)
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
-+#define BCM_63268_PERF_BASE           (0xb0000000)
-+#define BCM_63268_TIMER_BASE          (0xb0000080)
-+#define BCM_63268_WDT_BASE            (0xb000009c)
-+#define BCM_63268_UART0_BASE          (0xb0000180)
-+#define BCM_63268_UART1_BASE          (0xb00001a0)
-+#define BCM_63268_GPIO_BASE           (0xb00000c0)
-+#define BCM_63268_SPI_BASE            (0xb0000800)
-+#define BCM_63268_HSSPI_BASE          (0xb0001000)
-+#define BCM_63268_UDC0_BASE           (0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE         (0xb000c800)
-+#define BCM_63268_OHCI0_BASE          (0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
-+#define BCM_63268_USBD_BASE           (0xb0002400)
-+#define BCM_63268_MPI_BASE            (0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
-+#define BCM_63268_PCIE_BASE           (0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
-+#define BCM_63268_DSL_BASE            (0xdeadbeef)
-+#define BCM_63268_UBUS_BASE           (0xdeadbeef)
-+#define BCM_63268_ENET0_BASE          (0xdeadbeef)
-+#define BCM_63268_ENET1_BASE          (0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE                (0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
-+#define BCM_63268_ENETSW_BASE         (0xb0700000)
-+#define BCM_63268_EHCI0_BASE          (0xb0002500)
-+#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
-+#define BCM_63268_MEMC_BASE           (0xdeadbeef)
-+#define BCM_63268_DDR_BASE            (0xb0003000)
-+#define BCM_63268_M2M_BASE            (0xdeadbeef)
-+#define BCM_63268_ATM_BASE            (0xdeadbeef)
-+#define BCM_63268_XTM_BASE            (0xb0007000)
-+#define BCM_63268_XTMDMA_BASE         (0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_PCM_BASE            (0xb000b000)
-+#define BCM_63268_PCMDMA_BASE         (0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_RNG_BASE            (0xdeadbeef)
-+#define BCM_63268_MISC_BASE           (0xb0001800)
- extern const unsigned long *bcm63xx_regs_base;
-@@ -1084,6 +1147,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ            0
-+#define BCM_63268_ENET0_IRQ           0
-+#define BCM_63268_ENET1_IRQ           0
-+#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ          0
-+#define BCM_63268_ENET0_RXDMA_IRQ     0
-+#define BCM_63268_ENET0_TXDMA_IRQ     0
-+#define BCM_63268_ENET1_RXDMA_IRQ     0
-+#define BCM_63268_ENET1_TXDMA_IRQ     0
-+#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ             0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -22,6 +22,8 @@ static inline unsigned long bcm63xx_gpio
-               return 48;
-       case BCM6368_CPU_ID:
-               return 38;
-+      case BCM63268_CPU_ID:
-+              return 52;
-       case BCM6348_CPU_ID:
-       default:
-               return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -9,6 +9,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT         12
-+#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT                       8
- #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
-@@ -211,6 +213,52 @@
-                                       CKCTL_6368_NAND_EN |            \
-                                       CKCTL_6368_IPSEC_EN)
-+#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
-+#define CKCTL_63268_VDSL_EN           (1 << 3)
-+#define CKCTL_63268_MIPS_EN           (1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
-+#define CKCTL_63268_DECT_EN           (1 << 6)
-+#define CKCTL_63268_FAP0_EN           (1 << 7)
-+#define CKCTL_63268_FAP1_EN           (1 << 8)
-+#define CKCTL_63268_SAR_EN            (1 << 9)
-+#define CKCTL_63268_ROBOSW_EN         (1 << 10)
-+#define CKCTL_63268_PCM_EN            (1 << 11)
-+#define CKCTL_63268_USBD_EN           (1 << 12)
-+#define CKCTL_63268_USBH_EN           (1 << 13)
-+#define CKCTL_63268_IPSEC_EN          (1 << 14)
-+#define CKCTL_63268_SPI_EN            (1 << 15)
-+#define CKCTL_63268_HSSPI_EN          (1 << 16)
-+#define CKCTL_63268_PCIE_EN           (1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
-+#define CKCTL_63268_GMAC_EN           (1 << 19)
-+#define CKCTL_63268_NAND_EN           (1 << 20)
-+#define CKCTL_63268_TBUS_EN           (1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
-+                                      CKCTL_63268_VDSL_AFE_EN |       \
-+                                      CKCTL_63268_VDSL_EN |           \
-+                                      CKCTL_63268_WLAN_OCP_EN |       \
-+                                      CKCTL_63268_DECT_EN |           \
-+                                      CKCTL_63268_FAP0_EN |           \
-+                                      CKCTL_63268_FAP1_EN |           \
-+                                      CKCTL_63268_SAR_EN |            \
-+                                      CKCTL_63268_ROBOSW_EN |         \
-+                                      CKCTL_63268_PCM_EN |            \
-+                                      CKCTL_63268_USBD_EN |           \
-+                                      CKCTL_63268_USBH_EN |           \
-+                                      CKCTL_63268_IPSEC_EN |          \
-+                                      CKCTL_63268_SPI_EN |            \
-+                                      CKCTL_63268_HSSPI_EN |          \
-+                                      CKCTL_63268_PCIE_EN |           \
-+                                      CKCTL_63268_PHYMIPS_EN |        \
-+                                      CKCTL_63268_GMAC_EN |           \
-+                                      CKCTL_63268_NAND_EN |           \
-+                                      CKCTL_63268_TBUS_EN |           \
-+                                      CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
-@@ -224,6 +272,7 @@
- #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-@@ -234,6 +283,7 @@
- #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-@@ -244,6 +294,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358      0x14
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG_63268     0x18
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
-@@ -273,6 +324,7 @@
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
- #define PERF_SOFTRESET_6368_REG               0x10
-+#define PERF_SOFTRESET_63268_REG      0x10
- #define SOFTRESET_3368_SPI_MASK               (1 << 0)
- #define SOFTRESET_3368_ENET_MASK      (1 << 2)
-@@ -366,6 +418,26 @@
- #define SOFTRESET_6368_USBH_MASK      (1 << 12)
- #define SOFTRESET_6368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_63268_SPI_MASK      (1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
-+#define SOFTRESET_63268_SAR_MASK      (1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
-+#define SOFTRESET_63268_USBS_MASK     (1 << 5)
-+#define SOFTRESET_63268_USBH_MASK     (1 << 6)
-+#define SOFTRESET_63268_PCM_MASK      (1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
-+#define SOFTRESET_63268_DECT_MASK     (1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG           0x34
- #define MIPSPLLCTL_N1_SHIFT           20
-@@ -1499,6 +1571,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
-+#define MISC_STRAPBUS_63268_REG               0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT     21
-+#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -25,6 +25,7 @@ static inline int is_bcm63xx_internal_re
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-+      case BCM63268_CPU_ID:
-               if (offset >= 0xb0000000 && offset < 0xb1000000)
-                       return 1;
-               break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,7 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+              BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -276,7 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -295,8 +297,11 @@ bcm63xx_enetsw_register(const struct bcm
-       if (BCMCPU_IS_6328())
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
--      else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+               BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+      else if (BCMCPU_VARIANT_IS_63268() ||  BCMCPU_VARIANT_IS_63269())
-+              enetsw_pd.num_ports = ENETSW_PORTS_63268;
-       enetsw_pd.dma_has_sram = true;
-       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -62,6 +62,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT       8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/brcm63xx/patches-3.13/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.13/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 4e8a090..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -136,7 +136,8 @@
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
- #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK)
-+                               SOFTRESET_63268_PCIE_CORE_MASK | \
-+                               SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -45,6 +45,11 @@
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-                                       BCM_PCIE_MEM_SIZE_6328 - 1)
-+#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
-+                                      BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
-       }
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               return bcm63xx_register_pcie();
-       case BCM3368_CPU_ID:
-       case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.13/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.13/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 8383ef7..0000000
+++ /dev/null
@@ -1,671 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -18,6 +18,11 @@ config BCM63XX_EHCI
-       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+config BCM63XX_CPU_6318
-+      bool "support 6318 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -825,7 +825,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -252,7 +252,9 @@ static void hsspi_set(struct clk *clk, i
- {
-       u32 mask;
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318())
-+              mask = CKCTL_6318_HSSPI_EN;
-+      else if (BCMCPU_IS_6328())
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-@@ -417,12 +419,16 @@ void clk_put(struct clk *clk)
- EXPORT_SYMBOL(clk_put);
-+#define HSSPI_PLL_HZ_6318     250000000
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
- static int __init bcm63xx_clk_init(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              clk_hsspi.rate = HSSPI_PLL_HZ_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-               break;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
-       __GEN_CPU_IRQ_TABLE(3368)
- };
-+static const unsigned long bcm6318_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,12 +142,38 @@ unsigned int bcm63xx_get_memory_size(voi
-       return bcm63xx_memory_size;
- }
-+#define STRAP_OVERRIDE_BUS_REG                0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
-               return 300000000;
-+      case BCM6318_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+              pr_info("strap_override_bus = %08x\n", tmp);
-+
-+              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+              switch (mips_pll_fcvo) {
-+              case 0:
-+                      return 166000000;
-+              case 1:
-+                      return 400000000;
-+              case 2:
-+                      return 250000000;
-+              case 3:
-+                      return 333000000;
-+              };
-+      }
-       case BCM6328_CPU_ID:
-       {
-               unsigned int tmp, mips_pll_fcvo;
-@@ -295,6 +329,13 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
-+      if (BCMCPU_IS_6318()) {
-+              val = bcm_sdram_readl(SDRAM_CFG_REG);
-+              val = val & SDRAM_CFG_6318_SPACE_MASK;
-+              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+              return 1 << (val + 20);
-+      }
-+
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-@@ -342,6 +383,12 @@ void __init bcm63xx_cpu_init(void)
-       switch (c->cputype) {
-       case CPU_BMIPS3300:
-+              if ((read_c0_prid() & 0xff) >= 0x33) {
-+                      /* BCM6318 */
-+                      chipid_reg = BCM_6368_PERF_BASE;
-+                      break;
-+              }
-+
-               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
-                       __cpu_name[cpu] = "Broadcom BCM6338";
-               /* fall-through */
-@@ -389,6 +436,10 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-+      case BCM6318_CPU_ID:
-+              bcm63xx_regs_base = bcm6318_regs_base;
-+              bcm63xx_irqs = bcm6318_irqs;
-+              break;
-       case BCM3368_CPU_ID:
-               bcm63xx_regs_base = bcm3368_regs_base;
-               bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
-       u32 val;
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              /* only support serial flash */
-+              return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -70,7 +70,7 @@ static struct platform_device bcm63xx_sp
- int __init bcm63xx_spi_register(void)
- {
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -441,6 +441,16 @@ static void bcm63xx_init_irq(void)
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-+      case BCM6318_CPU_ID:
-+              irq_stat_addr[0] += PERF_IRQSTAT_6318_REG;
-+              irq_mask_addr[0] += PERF_IRQMASK_6318_REG;
-+              irq_bits = 128;
-+              ext_irq_count = 4;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_6318_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_6318_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
-               irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -72,7 +72,7 @@ void __init prom_init(void)
-                       if (reg & OTP_6328_REG3_TP1_DISABLED)
-                               bmips_smp_enabled = 0;
--              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-                       bmips_smp_enabled = 0;
-               }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -43,6 +43,23 @@
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+
-+#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET    0
-+#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL     0
-+#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM     0
-+#define BCM6318_RESET_MPI     0
-+#define BCM6318_RESET_PCIE    \
-+                              (SOFTRESET_6318_PCIE_MASK |             \
-+                               SOFTRESET_6318_PCIE_CORE_MASK |        \
-+                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
- #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
-@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(3368)
- };
-+static const u32 bcm6318_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6328)
- };
-@@ -183,6 +204,9 @@ static int __init bcm63xx_reset_bits_ini
-       if (BCMCPU_IS_3368()) {
-               reset_reg = PERF_SOFTRESET_6358_REG;
-               bcm63xx_reset_bits = bcm3368_reset_bits;
-+      } else if (BCMCPU_IS_6318()) {
-+              reset_reg = PERF_SOFTRESET_6318_REG;
-+              bcm63xx_reset_bits = bcm6318_reset_bits;
-       } else if (BCMCPU_IS_6328()) {
-               reset_reg = PERF_SOFTRESET_6328_REG;
-               bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -71,6 +71,9 @@ void bcm63xx_machine_reboot(void)
-       case BCM3368_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-+      case BCM6318_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-@@ -110,7 +113,7 @@ void bcm63xx_machine_reboot(void)
-               bcm6348_a1_reboot();
-       printk(KERN_INFO "triggering watchdog soft-reset...\n");
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
-               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
-       } else {
-               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -10,6 +10,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID                0x3368
-+#define BCM6318_CPU_ID                0x6318
- #define BCM6328_CPU_ID                0x6328
- #define BCM63281_CPU_ID               0x63281
- #define BCM63283_CPU_ID               0x63283
-@@ -38,6 +39,10 @@ static inline u32 __pure __bcm63xx_get_c
-               case BCM3368_CPU_ID:
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+              case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
-               case BCM6328_CPU_ID:
- #endif
-@@ -87,6 +92,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -98,6 +104,8 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
-       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -252,6 +260,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE            (0xdeadbeef)
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_6318_PERF_BASE            (0xb0000000)
-+#define BCM_6318_TIMER_BASE           (0xb0000040)
-+#define BCM_6318_WDT_BASE             (0xb0000068)
-+#define BCM_6318_UART0_BASE           (0xb0000100)
-+#define BCM_6318_UART1_BASE           (0xdeadbeef)
-+#define BCM_6318_GPIO_BASE            (0xb0000080)
-+#define BCM_6318_SPI_BASE             (0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE           (0xb0003000)
-+#define BCM_6318_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE          (0xb0006800)
-+#define BCM_6318_OHCI0_BASE           (0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
-+#define BCM_6318_USBD_BASE            (0xb0006000)
-+#define BCM_6318_MPI_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCIE_BASE            (0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_6318_DSL_BASE             (0xdeadbeef)
-+#define BCM_6318_UBUS_BASE            (0xdeadbeef)
-+#define BCM_6318_ENET0_BASE           (0xdeadbeef)
-+#define BCM_6318_ENET1_BASE           (0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE         (0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
-+#define BCM_6318_ENETSW_BASE          (0xb0080000)
-+#define BCM_6318_EHCI0_BASE           (0xb0005000)
-+#define BCM_6318_SDRAM_BASE           (0xb0004000)
-+#define BCM_6318_MEMC_BASE            (0xdeadbeef)
-+#define BCM_6318_DDR_BASE             (0xdeadbeef)
-+#define BCM_6318_M2M_BASE             (0xdeadbeef)
-+#define BCM_6318_ATM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE          (0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_PCM_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_RNG_BASE             (0xdeadbeef)
-+#define BCM_6318_MISC_BASE            (0xb0000280)
-+#define BCM_6318_OTP_BASE             (0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE           (0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -819,6 +877,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ              0
-+#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ            0
-+#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ             0
-+#define BCM_6318_ENET0_IRQ            0
-+#define BCM_6318_ENET1_IRQ            0
-+#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ           0
-+#define BCM_6318_ENET0_RXDMA_IRQ      0
-+#define BCM_6318_ENET0_TXDMA_IRQ      0
-+#define BCM_6318_ENET1_RXDMA_IRQ      0
-+#define BCM_6318_ENET1_TXDMA_IRQ      0
-+#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ              0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -52,6 +52,39 @@
-                                        CKCTL_3368_EMUSB_EN | \
-                                        CKCTL_3368_USBU_EN)
-+#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
-+#define CKCTL_6318_USB_ASB_EN         (1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
-+#define CKCTL_6318_ADSL_EN            (1 << 11)
-+#define CKCTL_6318_SAR125_EN          (1 << 12)
-+#define CKCTL_6318_MIPS_EN            (1 << 13)
-+#define CKCTL_6318_PCIE_EN            (1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
-+#define CKCTL_6318_SDR_EN             (1 << 19)
-+#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN           (1 << 25)
-+#define CKCTL_6318_PCIE25_EN          (1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
-+                                      CKCTL_6318_ADSL_QPROC_EN |      \
-+                                      CKCTL_6318_ADSL_AFE_EN |        \
-+                                      CKCTL_6318_ADSL_EN |            \
-+                                      CKCTL_6318_SAR_EN  |            \
-+                                      CKCTL_6318_USB_EN |             \
-+                                      CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
-@@ -259,12 +292,27 @@
-                                       CKCTL_63268_TBUS_EN |           \
-                                       CKCTL_63268_ROBOSW250_EN)
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG             0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
-+#define UB_CKCTL_6318_ARB_EN          (1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
-+#define UB_CKCTL_6318_SAR_EN          (1 << 7)
-+#define UB_CKCTL_6318_SDR_EN          (1 << 8)
-+#define UB_CKCTL_6318_USB_EN          (1 << 9)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG         0xc
-+#define PERF_IRQMASK_6318_REG         0x20
- #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
-@@ -276,6 +324,7 @@
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-+#define PERF_IRQSTAT_6318_REG         0x30
- #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
-@@ -287,6 +336,7 @@
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-+#define PERF_EXTIRQ_CFG_REG_6318      0x18
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
- #define PERF_EXTIRQ_CFG_REG_6338      0x14
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
-@@ -320,6 +370,7 @@
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG            0x28
-+#define PERF_SOFTRESET_6318_REG               0x10
- #define PERF_SOFTRESET_6328_REG               0x10
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
-@@ -333,6 +384,18 @@
- #define SOFTRESET_3368_USBS_MASK      (1 << 11)
- #define SOFTRESET_3368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_6318_SPI_MASK               (1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
-+#define SOFTRESET_6318_SAR_MASK               (1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
-+#define SOFTRESET_6318_USBS_MASK      (1 << 4)
-+#define SOFTRESET_6318_USBH_MASK      (1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK               (1 << 0)
- #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
- #define SOFTRESET_6328_SAR_MASK               (1 << 2)
-@@ -504,8 +567,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
-+#define TIMER_IRQMASK_6318_REG                0x0
-+#define TIMER_IRQSTAT_6318_REG                0x4
-+#define IRQSTATMASK_TIMER0            (1 << 0)
-+#define IRQSTATMASK_TIMER1            (1 << 1)
-+#define IRQSTATMASK_TIMER2            (1 << 2)
-+#define IRQSTATMASK_TIMER3            (1 << 3)
-+#define IRQSTATMASK_WDT                       (1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
- #define TIMER_CTL0_REG                        0x4
- #define TIMER_CTL1_REG                        0x8
- #define TIMER_CTL2_REG                        0xC
-@@ -1372,6 +1444,8 @@
- #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT          13
- #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT    4
-+#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- #define SDRAM_MBASE_REG                       0xc
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -22,6 +22,7 @@ static inline int is_bcm63xx_internal_re
-               if (offset >= 0xfff00000)
-                       return 1;
-               break;
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
-               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
-       int i;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-               return 0;
-       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,8 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--              BCMCPU_IS_63268())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -277,8 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--              !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -295,7 +295,7 @@ bcm63xx_enetsw_register(const struct bcm
-       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-                BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              return 50;
-       case BCM6328_CPU_ID:
-               return 32;
-       case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-3.13/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-3.13/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644 (file)
index 71044f8..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -28,7 +28,9 @@
-       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
-       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
-       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
--      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
-+      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
-+      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
-+      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
- #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
-@@ -42,6 +44,8 @@
- #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+#define BCM3368_RESET_PCIE_CORE       0
-+#define BCM3368_RESET_PCIE_HARD       0
- #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-@@ -54,11 +58,10 @@
- #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM     0
- #define BCM6318_RESET_MPI     0
--#define BCM6318_RESET_PCIE    \
--                              (SOFTRESET_6318_PCIE_MASK |             \
--                               SOFTRESET_6318_PCIE_CORE_MASK |        \
--                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
-@@ -70,11 +73,10 @@
- #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI     0
--#define BCM6328_RESET_PCIE    \
--                              (SOFTRESET_6328_PCIE_MASK |             \
--                               SOFTRESET_6328_PCIE_CORE_MASK |        \
--                               SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
- #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
-@@ -88,6 +90,8 @@
- #define BCM6338_RESET_MPI     0
- #define BCM6338_RESET_PCIE    0
- #define BCM6338_RESET_PCIE_EXT        0
-+#define BCM6338_RESET_PCIE_CORE       0
-+#define BCM6338_RESET_PCIE_HARD       0
- #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
-@@ -101,6 +105,8 @@
- #define BCM6348_RESET_MPI     0
- #define BCM6348_RESET_PCIE    0
- #define BCM6348_RESET_PCIE_EXT        0
-+#define BCM6348_RESET_PCIE_CORE       0
-+#define BCM6348_RESET_PCIE_HARD       0
- #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
-@@ -114,6 +120,8 @@
- #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE    0
- #define BCM6358_RESET_PCIE_EXT        0
-+#define BCM6358_RESET_PCIE_CORE       0
-+#define BCM6358_RESET_PCIE_HARD       0
- #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET    0
-@@ -125,9 +133,10 @@
- #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI     0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--                               SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD       0
- #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET    0
-@@ -141,6 +150,8 @@
- #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM6368_RESET_PCIE_CORE       0
-+#define BCM6368_RESET_PCIE_HARD       0
- #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET   0
-@@ -152,10 +163,10 @@
- #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
--#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK | \
--                               SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -14,6 +14,8 @@ enum bcm63xx_core_reset {
-       BCM63XX_RESET_MPI,
-       BCM63XX_RESET_PCIE,
-       BCM63XX_RESET_PCIE_EXT,
-+      BCM63XX_RESET_PCIE_CORE,
-+      BCM63XX_RESET_PCIE_HARD,
- };
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
-       /* reset the PCIe core */
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+              mdelay(10);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+      }
-       mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-       mdelay(10);
diff --git a/target/linux/brcm63xx/patches-3.13/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.13/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 2225587..0000000
+++ /dev/null
@@ -1,342 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -50,6 +50,18 @@ static void bcm_hwclock_set(u32 mask, in
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+      u32 reg;
-+
-+      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+      if (enable)
-+              reg |= mask;
-+      else
-+              reg &= ~mask;
-+      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -317,12 +329,17 @@ static struct clk clk_ipsec = {
- static void pcie_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+      }
- }
- static struct clk clk_pcie = {
-@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev,
-       if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
-           !strcmp(id, "ipsec"))
-               return &clk_ipsec;
--      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-+      if ((BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-           !strcmp(id, "pcie"))
-               return &clk_pcie;
-       return ERR_PTR(-ENOENT);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,6 +40,12 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
-+                                      BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1662,6 +1662,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
-+#define PCIE_SPECIFIC_REG             0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
-+
- #define PCIE_CONFIG2_REG              0x408
- #define CONFIG2_BAR1_SIZE_EN          1
- #define CONFIG2_BAR1_SIZE_MASK                0xf
-@@ -1707,7 +1718,54 @@
- #define PCIE_RC_INT_C                 (1 << 2)
- #define PCIE_RC_INT_D                 (1 << 3)
--#define PCIE_DEVICE_OFFSET            0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB      0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT     20
-+#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT      4
-+#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
-+#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN      1
-+
-+#define PCIE_HARD_DEBUG_REG           0x4204
-+#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
-+#define CPU_INT_PCIE_INTA             (1 << 1)
-+#define CPU_INT_PCIE_INTB             (1 << 2)
-+#define CPU_INT_PCIE_INTC             (1 << 3)
-+#define CPU_INT_PCIE_INTD             (1 << 4)
-+#define CPU_INT_PCIE_INTR             (1 << 5)
-+#define CPU_INT_PCIE_NMI              (1 << 6)
-+#define CPU_INT_PCIE_UBUS             (1 << 7)
-+#define CPU_INT_IPI                   (1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG                0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT                12
-+#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT         15
-+#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT         20
-+#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318               0x9000
-+#define PCIE_DEVICE_OFFSET_6328               0x8000
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -489,8 +489,12 @@ static int bcm63xx_pcie_read(struct pci_
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
-@@ -509,8 +513,12 @@ static int bcm63xx_pcie_write(struct pci
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- void __iomem *pci_iospace_start;
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
-       u32 val;
-       u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
-       mdelay(200);
- }
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
-       u32 val;
--      /* enable clock */
--      pcie_clk = clk_get(NULL, "pcie");
--      if (IS_ERR_OR_NULL(pcie_clk))
--              return -ENODEV;
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
--      clk_prepare_enable(pcie_clk);
-+      /* reset the PCIe core */
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+      mdelay(10);
-+      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+      val &= ~HARD_DEBUG_SERDES_IDDQ;
-+      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+      mdelay(200);
-+}
--      bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+      u32 val;
-       /* configure the PCIe bridge */
-       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
-       val |= OPT2_CFG_TYPE1_BD_SEL;
-       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
-+      /* set bar0 to little endian */
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+      val |= BASEMASK_REMAP_EN;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+      u32 val;
-+
-+      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+                      PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+             C2P_BASELIMIT_BASE_SHIFT;
-+
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+      /* set bar0 to little endian */
-+      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+                      PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+      u32 val;
-+
-+      /* enable clock */
-+      pcie_clk = clk_get(NULL, "pcie");
-+      if (IS_ERR_OR_NULL(pcie_clk))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(pcie_clk);
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+              bcm63xx_reset_pcie_gen1();
-+              bcm63xx_init_pcie_gen1();
-+      } else {
-+              bcm63xx_reset_pcie_gen2();
-+              bcm63xx_init_pcie_gen2();
-+      }
-+
-       /* setup class code as bridge */
-       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
-       val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
-       val &= ~CONFIG2_BAR1_SIZE_MASK;
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
--      /* set bar0 to little endian */
--      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--      val |= BASEMASK_REMAP_EN;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
-       register_pci_controller(&bcm63xx_pcie_controller);
-       return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-       } else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
-       }
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.13/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-3.13/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644 (file)
index a91a29b..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
-       {
-               .name           = "cfe",
-@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+void __init bcm63xx_flash_detect(void)
-+{
-+      flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--      int flash_type;
-       u32 val;
--      flash_type = bcm63xx_detect_flash_type();
--
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-               /* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -18,6 +18,7 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_gpio.h>
-+#include <bcm63xx_dev_flash.h>
- void __init prom_init(void)
- {
-@@ -56,6 +57,9 @@ void __init prom_init(void)
-       /* register gpiochip */
-       bcm63xx_gpio_init();
-+      /* detect and setup flash access */
-+      bcm63xx_flash_detect();
-+
-       /* do low level board init */
-       board_prom_init();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -7,6 +7,8 @@ enum {
-       BCM63XX_FLASH_TYPE_NAND,
- };
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.13/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-3.13/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644 (file)
index 2b19600..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -110,9 +110,46 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+#define HSSPI_FLASH_CTRL_REG          0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK   0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
-+#define FLASH_CTRL_MB_EN              (1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
-       flash_type = bcm63xx_detect_flash_type();
-+
-+      /* reduce flash mapping to single i/o reads for safety */
-+      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+           BCMCPU_IS_63268())) {
-+              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+              if (!(val & FLASH_CTRL_MB_EN))
-+                      return;
-+
-+              val &= ~FLASH_CTRL_MB_EN;
-+              val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+
-+              switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+              case FLASH_CTRL_ADDR_BYTES_3:
-+                      val |= 0x0b; /* OPCODE_FAST_READ */
-+                      break;
-+              case FLASH_CTRL_ADDR_BYTES_4:
-+                      val |= 0x0c; /* OPCODE_FAST_READ_4B */
-+                      break;
-+              case FLASH_CTRL_ADDR_BYTES_2:
-+              default:
-+                      pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+                              val & FLASH_CTRL_ADDR_BYTES_MASK);
-+                      return;
-+              }
-+
-+              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+      }
- }
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-3.13/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-3.13/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644 (file)
index 384702c..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -136,7 +136,11 @@ static struct clk clk_ephy = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+                              CKCTL_6318_ROBOSW025_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_6328())
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -183,18 +187,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--      else if (BCMCPU_IS_6348())
-+      } else if (BCMCPU_IS_6348()) {
-               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--      else if (BCMCPU_IS_6368())
-+      } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--      else
-+      } else {
-               return;
-+      }
-       if (enable)
-               msleep(100);
-@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev,
-               return &clk_enetsw;
-       if (!strcmp(id, "ephy"))
-               return &clk_ephy;
--      if (!strcmp(id, "usbh"))
-+      if (!strcmp(id, "usbh") || (BCMCPU_IS_6318() && !strcmp(id, "usbd")))
-               return &clk_usbh;
--      if (!strcmp(id, "usbd"))
-+      if (!strcmp(id, "usbd") && !BCMCPU_IS_6318())
-               return &clk_usbd;
-       if (!strcmp(id, "spi"))
-               return &clk_spi;
diff --git a/target/linux/brcm63xx/patches-3.13/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-3.13/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644 (file)
index cd4189b..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -800,6 +800,12 @@
- #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
-+#define GPIO_PINMUX_SEL0_6318         0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- #define GPIO_PINMUX_OTHR_REG          0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -1118,6 +1124,7 @@
- #define USBH_PRIV_SWAP_6358_REG               0x0
- #define USBH_PRIV_SWAP_6368_REG               0x1c
-+#define USBH_PRIV_SWAP_6318_REG               0x0c
- #define USBH_PRIV_SWAP_USBD_SHIFT     6
- #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1143,6 +1150,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
-+
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -914,6 +914,15 @@ void __init board_prom_init(void)
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+      }
-+#endif
- }
- /*
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -22,6 +22,8 @@ config BCM63XX_CPU_6318
-       bool "support 6318 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-3.13/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-3.13/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644 (file)
index 90e3655..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -585,6 +585,9 @@
- #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
- #define TIMER_CTL_ENABLE_MASK         (1 << 31)
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG         0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1666,6 +1669,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT     21
- #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+#define MISC_IDDQ_CTRL_6328_REG               0x48
-+#define MISC_IDDQ_CTRL_63268_REG      0x4c
-+
-+#define IDDQ_CTRL_63268_USBH          (1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -62,6 +62,26 @@ static void bcm_ub_hwclock_set(u32 mask,
-       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+      u32 offset;
-+      u32 reg;
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+              offset = MISC_IDDQ_CTRL_6328_REG;
-+      else if (BCMCPU_IS_63268())
-+              offset = MISC_IDDQ_CTRL_63268_REG;
-+      else
-+              return;
-+
-+      reg = bcm_misc_readl(offset);
-+      if (enable)
-+              reg &= ~mask;
-+      else
-+              reg |= mask;
-+      bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -199,7 +219,17 @@ static void usbh_set(struct clk *clk, in
-       } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-       } else if (BCMCPU_IS_63268()) {
-+              u32 reg;
-+
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+              if (enable)
-+                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+              else
-+                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
-       } else {
-               return;
-       }
diff --git a/target/linux/brcm63xx/patches-3.13/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-3.13/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644 (file)
index 9884ff6..0000000
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1152,11 +1152,18 @@
- #define USBH_PRIV_SETUP_6368_REG      0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT     5
-+#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
- #define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -72,6 +72,8 @@ config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-3.13/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-3.13/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644 (file)
index 43709af..0000000
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -42,6 +42,7 @@ struct board_info {
-       /* USB config */
-       struct bcm63xx_usbd_platform_data usbd;
-+      unsigned int num_usbh_ports:2;
-       /* DSP config */
-       struct bcm63xx_dsp_platform_data dsp;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -965,6 +965,7 @@ int __init board_register_devices(void)
- {
-       int button_count = 0;
-       int led_count = 0;
-+      int usbh_ports = 0;
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -987,14 +988,21 @@ int __init board_register_devices(void)
-           !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-+      if ((board.has_ohci0 || board.has_ehci0)) {
-+              usbh_ports = board.num_usbh_ports;
-+
-+              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+                      usbh_ports = 1;
-+      }
-+
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-       if (board.has_ehci0)
--              bcm63xx_ehci_register();
-+              bcm63xx_ehci_register(usbh_ports);
-       if (board.has_ohci0)
--              bcm63xx_ohci_register();
-+              bcm63xx_ohci_register(usbh_ports);
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
-       },
- };
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-+      bcm63xx_ehci_pdata.num_ports = num_ports;       
-+
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-       ehci_resources[0].end = ehci_resources[0].start;
-       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-       .no_big_frame_no        = 1,
--      .num_ports              = 1,
-       .power_on               = bcm63xx_ohci_power_on,
-       .power_off              = bcm63xx_ohci_power_off,
-       .power_suspend          = bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
-       },
- };
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
-       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-               return -ENODEV;
-+      bcm63xx_ohci_pdata.num_ports = num_ports;
-+
-       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-       ohci_resources[0].end = ohci_resources[0].start;
-       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-3.13/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-3.13/351-set-board-usbh-ports.patch
deleted file mode 100644 (file)
index e007ddd..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -634,6 +634,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-       .leds = {
-               {
diff --git a/target/linux/brcm63xx/patches-3.13/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.13/400-bcm963xx_flashmap.patch
deleted file mode 100644 (file)
index 1594a06..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -32,7 +32,7 @@ static struct mtd_partition mtd_partitio
-       }
- };
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
-       int nulllen = 0;
-       int numslots;
-       unsigned long offset;
-+      unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-       static char nullstring[] = "unallocated";
- #endif
-@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
-               goto out;
-       }
-+      if (data && data->origin) {
-+              fis_origin = data->origin;
-+      } else {
-+              for (i = 0; i < numslots; i++) {
-+                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+                              fis_origin = ((buf[i].flash_base & (master->size << 1)) - 1);
-+                      }
-+              }
-+      }
-+
-       for (i = 0; i < numslots; i++) {
-               struct fis_list *new_fl, **prev;
-@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
-                       goto out;
-               }
-               new_fl->img = &buf[i];
--              if (data && data->origin)
--                      buf[i].flash_base -= data->origin;
--              else
--                      buf[i].flash_base &= master->size-1;
-+              if (fis_origin)
-+                      buf[i].flash_base -= fis_origin;
-+
-+              buf[i].flash_base &= (master->size << 1) - 1;
-               /* I'm sure the JFFS2 code has done me permanent damage.
-                * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.13/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.13/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644 (file)
index caf8b95..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/uapi/linux/bcm963xx_tag.h
-+++ b/include/uapi/linux/bcm963xx_tag.h
-@@ -85,8 +85,10 @@ struct bcm_tag {
-       __u32 rootfs_crc;
-       /* 224-227: CRC32 of kernel partition */
-       __u32 kernel_crc;
--      /* 228-235: Unused at present */
--      char reserved1[8];
-+      /* 228-231: Image sequence number */
-+      char image_sequence[4];
-+      /* 222-235: Openwrt: real rootfs length */
-+      __u32 real_rootfs_length;
-       /* 236-239: CRC32 of header excluding last 20 bytes */
-       __u32 header_crc;
-       /* 240-255: Unused at present */
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -110,7 +110,8 @@ static int bcm63xx_parse_cfe_partitions(
-               } else {
-                       /* OpenWrt layout */
-                       rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
-+                      rootfslen = buf->real_rootfs_length;
-+                      spareaddr = rootfsaddr + rootfslen;
-               }
-       } else {
-               pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
diff --git a/target/linux/brcm63xx/patches-3.13/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.13/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644 (file)
index fc2e8ab..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1633,7 +1633,7 @@ static int compute_hw_mtu(struct bcm_ene
-       actual_mtu = mtu;
-       /* add ethernet header + vlan tag size */
--      actual_mtu += VLAN_ETH_HLEN;
-+      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-       if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
-               return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.13/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.13/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644 (file)
index 6f4f8d9..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,6 +912,8 @@ void __init board_prom_init(void)
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G3_EXT_MII |
-                               GPIO_MODE_6348_G0_EXT_MII;
-+              else if (BCMCPU_IS_6358())
-+                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -770,6 +770,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
- #define GPIO_MODE_6358_UTOPIA         (1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/brcm63xx/patches-3.13/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.13/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644 (file)
index d8405f5..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |   84 +++++++++++++-------------
- 1 files changed, 41 insertions(+), 43 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
-       struct bcm_enet_priv *priv;
-       struct sockaddr addr;
-       struct device *kdev;
--      struct phy_device *phydev;
-       int i, ret;
-       unsigned int size;
--      char phy_id[MII_BUS_ID_SIZE + 3];
-       void *p;
-       u32 val;
-@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
-       kdev = &priv->pdev->dev;
-       if (priv->has_phy) {
--              /* connect to PHY */
--              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--                       priv->mii_bus->id, priv->phy_id);
--
--              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--                                   PHY_INTERFACE_MODE_MII);
--
--              if (IS_ERR(phydev)) {
--                      dev_err(kdev, "could not attach to PHY\n");
--                      return PTR_ERR(phydev);
--              }
--
--              /* mask with MAC supported features */
--              phydev->supported &= (SUPPORTED_10baseT_Half |
--                                    SUPPORTED_10baseT_Full |
--                                    SUPPORTED_100baseT_Half |
--                                    SUPPORTED_100baseT_Full |
--                                    SUPPORTED_Autoneg |
--                                    SUPPORTED_Pause |
--                                    SUPPORTED_MII);
--              phydev->advertising = phydev->supported;
--
--              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--                      phydev->advertising |= SUPPORTED_Pause;
--              else
--                      phydev->advertising &= ~SUPPORTED_Pause;
--
--              dev_info(kdev, "attached PHY at address %d [%s]\n",
--                       phydev->addr, phydev->drv->name);
--
-+              /* Reset state */
-               priv->old_link = 0;
-               priv->old_duplex = -1;
-               priv->old_pause = -1;
--              priv->phydev = phydev;
-       }
-       /* mask all interrupts and request them */
-@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
--              goto out_phy_disconnect;
-+              return ret;
-       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
-                         dev->name, dev);
-@@ -1127,9 +1095,6 @@ out_freeirq_rx:
- out_freeirq:
-       free_irq(dev->irq, dev);
--out_phy_disconnect:
--      phy_disconnect(priv->phydev);
--
-       return ret;
- }
-@@ -1234,12 +1199,6 @@ static int bcm_enet_stop(struct net_devi
-       free_irq(priv->irq_rx, dev);
-       free_irq(dev->irq, dev);
--      /* release phy */
--      if (priv->has_phy) {
--              phy_disconnect(priv->phydev);
--              priv->phydev = NULL;
--      }
--
-       return 0;
- }
-@@ -1834,6 +1793,8 @@ static int bcm_enet_probe(struct platfor
-       /* MII bus registration */
-       if (priv->has_phy) {
-+              struct phy_device *phydev;
-+              char phy_id[MII_BUS_ID_SIZE + 3];
-               priv->mii_bus = mdiobus_alloc();
-               if (!priv->mii_bus) {
-@@ -1871,6 +1832,38 @@ static int bcm_enet_probe(struct platfor
-                       dev_err(&pdev->dev, "unable to register mdio bus\n");
-                       goto out_free_mdio;
-               }
-+
-+              /* connect to PHY */
-+              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+                       priv->mii_bus->id, priv->phy_id);
-+
-+              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+                                   PHY_INTERFACE_MODE_MII);
-+
-+              if (IS_ERR(phydev)) {
-+                      dev_err(&pdev->dev, "could not attach to PHY\n");
-+                      goto out_unregister_mdio;
-+              }
-+
-+              /* mask with MAC supported features */
-+              phydev->supported &= (SUPPORTED_10baseT_Half |
-+                                    SUPPORTED_10baseT_Full |
-+                                    SUPPORTED_100baseT_Half |
-+                                    SUPPORTED_100baseT_Full |
-+                                    SUPPORTED_Autoneg |
-+                                    SUPPORTED_Pause |
-+                                    SUPPORTED_MII);
-+              phydev->advertising = phydev->supported;
-+
-+              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+                      phydev->advertising |= SUPPORTED_Pause;
-+              else
-+                      phydev->advertising &= ~SUPPORTED_Pause;
-+
-+              dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
-+                       phydev->addr, phydev->drv->name);
-+
-+              priv->phydev = phydev;
-       } else {
-               /* run platform code to initialize PHY device */
-@@ -1916,6 +1909,9 @@ static int bcm_enet_probe(struct platfor
-       return 0;
- out_unregister_mdio:
-+      if (priv->phydev)
-+              phy_disconnect(priv->phydev);
-+
-       if (priv->mii_bus)
-               mdiobus_unregister(priv->mii_bus);
-@@ -1957,6 +1953,8 @@ static int bcm_enet_remove(struct platfo
-       enet_writel(priv, 0, ENET_MIISC_REG);
-       if (priv->has_phy) {
-+              phy_disconnect(priv->phydev);
-+              priv->phydev = NULL;
-               mdiobus_unregister(priv->mii_bus);
-               mdiobus_free(priv->mii_bus);
-       } else {
diff --git a/target/linux/brcm63xx/patches-3.13/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.13/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644 (file)
index 7589092..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1086,6 +1086,19 @@
- #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG              (0xb0)
- #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2228,6 +2228,18 @@ static int bcm_enetsw_open(struct net_de
-               priv->sw_port_link[i] = 0;
-       }
-+      /* enable external ports */
-+      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+              u8 rgmii_ctrl;
-+
-+              if (!priv->used_ports[i].used)
-+                      continue;
-+
-+              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+      }
-+
-       /* reset mib */
-       val = enetsw_readb(priv, ENETSW_GMCR_REG);
-       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-3.13/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.13/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644 (file)
index 76a8754..0000000
+++ /dev/null
@@ -1,133 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   33 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,9 +16,12 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-@@ -57,6 +60,21 @@ static struct platform_device mtd_dev =
-       },
- };
-+static struct flash_platform_data bcm63xx_flash_data = {
-+      .part_probe_types       = bcm63xx_part_types,
-+};
-+
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+      {
-+              .bus_num        = 0,
-+              .chip_select    = 0,
-+              .mode           = 0,
-+              .max_speed_hz   = 781000,
-+              .modalias       = "m25p80",
-+              .platform_data  = &bcm63xx_flash_data,
-+      },
-+};
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -64,9 +82,15 @@ static int __init bcm63xx_detect_flash_t
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6318_CPU_ID:
-               /* only support serial flash */
-+              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
-               return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -85,12 +109,20 @@ static int __init bcm63xx_detect_flash_t
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6362_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-                       return BCM63XX_FLASH_TYPE_NAND;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+              if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-               case STRAPBUS_6368_BOOT_SEL_NAND:
-                       return BCM63XX_FLASH_TYPE_NAND;
-@@ -101,6 +133,11 @@ static int __init bcm63xx_detect_flash_t
-               }
-       case BCM63268_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -167,8 +204,15 @@ int __init bcm63xx_flash_register(void)
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
--              pr_warn("unsupported serial flash detected\n");
--              return -ENODEV;
-+              if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+                  BCMCPU_IS_63268())
-+                      bcm63xx_spi_flash_info[0].bus_num = 1;
-+
-+              if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
-+                      bcm63xx_flash_data.max_transfer_len = SPI_6358_MSG_DATA_SIZE;
-+
-+              return spi_register_board_info(bcm63xx_spi_flash_info,
-+                                      ARRAY_SIZE(bcm63xx_spi_flash_info));
-       case BCM63XX_FLASH_TYPE_NAND:
-               pr_warn("unsupported NAND flash detected\n");
-               return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -827,6 +827,7 @@
- #define GPIO_STRAPBUS_REG             0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND   0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1697,6 +1698,7 @@
- #define IDDQ_CTRL_63268_USBH          (1 << 4)
- #define MISC_STRAPBUS_6328_REG                0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/brcm63xx/patches-3.13/412-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.13/412-MTD-physmap-allow-passing-pp_data.patch
deleted file mode 100644 (file)
index 3511120..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 266c506f4b262bd6aba0776a03d82c98e65d9906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:32:36 +0200
-Subject: [PATCH 63/79] MTD: physmap: allow passing pp_data
-
----
- drivers/mtd/maps/physmap.c  |    4 +++-
- include/linux/mtd/physmap.h |    1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -96,6 +96,7 @@ static int physmap_flash_probe(struct pl
- {
-       struct physmap_flash_data *physmap_data;
-       struct physmap_flash_info *info;
-+      struct mtd_part_parser_data *pp_data;
-       const char * const *probe_type;
-       const char * const *part_types;
-       int err = 0;
-@@ -187,8 +188,9 @@ static int physmap_flash_probe(struct pl
-       spin_lock_init(&info->vpp_lock);
-       part_types = physmap_data->part_probe_types ? : part_probe_types;
-+      pp_data = physmap_data->pp_data ? physmap_data->pp_data : NULL;
--      mtd_device_parse_register(info->cmtd, part_types, NULL,
-+      mtd_device_parse_register(info->cmtd, part_types, pp_data,
-                                 physmap_data->parts, physmap_data->nr_parts);
-       return 0;
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -31,6 +31,7 @@ struct physmap_flash_data {
-       char                    *probe_type;
-       struct mtd_partition    *parts;
-       const char * const      *part_probe_types;
-+      struct mtd_part_parser_data *pp_data;
- };
- #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/target/linux/brcm63xx/patches-3.13/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.13/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644 (file)
index 7991fad..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -33,6 +33,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- #include <uapi/linux/bcm933xx_hcs.h>
- #include <uapi/linux/bcm963xx_tag.h>
-@@ -969,6 +970,7 @@ int __init board_register_devices(void)
-       int button_count = 0;
-       int led_count = 0;
-       int usbh_ports = 0;
-+      int i;
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -1014,7 +1016,8 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
- #ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+      if (!board.has_caldata &&
-+          !bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               if (ssb_arch_register_fallback_sprom(
-@@ -1061,5 +1064,9 @@ int __init board_register_devices(void)
-               platform_device_register(&bcm63xx_gpio_keys_device);
-       }
-+      /* register any fixups */
-+      for (i = 0; i < board.has_caldata; i++)
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -8,6 +8,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
-+#include <pci_ath9k_fixup.h>
- /*
-  * flash mapping
-@@ -15,6 +16,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
-+struct ath9k_caldata {
-+      unsigned int    slot;
-+      u32             caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -34,6 +40,10 @@ struct board_info {
-       unsigned int    has_dsp:1;
-       unsigned int    has_uart0:1;
-       unsigned int    has_uart1:1;
-+      unsigned int    has_caldata:2;
-+
-+      /* wifi calibration data config */
-+      struct ath9k_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.13/414-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.13/414-MTD-m25p80-allow-passing-pp_data.patch
deleted file mode 100644 (file)
index 55bb37f..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7f17dfe9009beb07a3de0e380932a725293829df Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:33:03 +0200
-Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
-
----
- drivers/mtd/devices/m25p80.c |    3 +++
- include/linux/spi/flash.h    |    2 ++
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -992,6 +992,9 @@ static int m25p_probe(struct spi_device
-                       dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
-       }
-+      if (data && data->pp_data)
-+              memcpy(&ppdata, data->pp_data, sizeof(ppdata));
-+
-       info = (void *)id->driver_data;
-       if (info->jedec_id) {
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -12,6 +12,7 @@ struct mtd_part_parser_data;
-  *    with chips that can't be queried for JEDEC or other IDs
-  * @part_probe_types: optional list of MTD parser names to use for
-  *    partitioning
-+ * @pp_data: optional partition parser data.
-  *
-  * @max_transfer_len: option maximum read/write length limitation for
-  *    SPI controllers not able to transfer any length commands.
-@@ -30,6 +31,7 @@ struct flash_platform_data {
-       char            *type;
-       const char      **part_probe_types;
-+      struct mtd_part_parser_data *pp_data;
-       unsigned int    max_transfer_len;
-       /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/brcm63xx/patches-3.13/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-3.13/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
deleted file mode 100644 (file)
index bde8961..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 13 Jan 2014 12:12:30 +0100
-Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -222,3 +222,8 @@ int __init bcm63xx_flash_register(void)
-               return -ENODEV;
-       }
- }
-+
-+int bcm63xx_flash_get_type(void)
-+{
-+      return flash_type;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,4 +11,6 @@ void bcm63xx_flash_detect(void);
- int __init bcm63xx_flash_register(void);
-+int bcm63xx_flash_get_type(void);
-+
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.13/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.13/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644 (file)
index af06428..0000000
+++ /dev/null
@@ -1,229 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--                 usb-common.o
-+                 pci-ath9k-fixup.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,192 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <pci_ath9k_fixup.h>
-+
-+#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+struct ath9k_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+      u32 addr;
-+
-+      if (BCMCPU_IS_6328()) {
-+              addr = 0x18000000;
-+      } else {
-+              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+              addr &= MPI_CSBASE_BASE_MASK;
-+      }
-+
-+      switch (bcm63xx_flash_get_type()) {
-+      case BCM63XX_FLASH_TYPE_PARALLEL:
-+              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+              return eeprom;
-+      case BCM63XX_FLASH_TYPE_SERIAL:
-+              /* the first megabyte is memory mapped */
-+              if (offset < 0x100000) {
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      return eeprom;
-+              }
-+
-+              if (BCMCPU_IS_6328()) {
-+                      /* we can change the memory mapped megabyte */
-+                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      bcm_hsspi_writel(0, 0x18);
-+                      return eeprom;
-+              }
-+              /* can't do anything here without talking to the SPI controller. */
-+      case BCM63XX_FLASH_TYPE_NAND:
-+      default:
-+              return NULL;
-+      }
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+      void __iomem *mem;
-+      struct ath9k_platform_data *pdata = NULL;
-+      u16 *cal_data = NULL;
-+      u16 cmd;
-+      u32 bar0;
-+      u32 val;
-+      unsigned i;
-+
-+      for (i = 0; i < ath9k_num_fixups; i++) {
-+              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+              pdata = &ath9k_fixups[i].pdata;
-+              break;
-+      }
-+
-+      if (cal_data == NULL)
-+              return;
-+
-+      if (*cal_data != 0xa55a) {
-+              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM6328_CPU_ID:
-+              val = BCM_PCIE_MEM_BASE_PA_6328;
-+              break;
-+      case BCM6348_CPU_ID:
-+      case BCM6358_CPU_ID:
-+      case BCM6368_CPU_ID:
-+              val = BCM_PCI_MEM_BASE_PA;
-+              break;
-+      default:
-+              BUG();
-+      }
-+
-+      mem = ioremap(val, 0x10000);
-+      if (!mem) {
-+              pr_err("pci %s: ioremap error\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      /* set offset to first reg address */
-+      cal_data += 3;
-+      while(*cal_data != 0xffff) {
-+              u32 reg;
-+              reg = *cal_data++;
-+              val = *cal_data++;
-+              val |= (*cal_data++) << 16;
-+
-+              writel(val, mem + reg);
-+              udelay(100);
-+      }
-+
-+      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+      dev->vendor = val & 0xffff;
-+      dev->device = (val >> 16) & 0xffff;
-+
-+      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+      dev->revision = val & 0xff;
-+      dev->class = val >> 8; /* upper 3 bytes */
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+      iounmap(mem);
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+              return;
-+
-+      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+      ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.13/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.13/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
deleted file mode 100644 (file)
index 3b02c07..0000000
+++ /dev/null
@@ -1,120 +0,0 @@
-Allow bcm63xxpart to receive a caldata offset if calibration data is
-contained in flash.
----
- drivers/mtd/bcm63xxpart.c      |   51 ++++++++++++++++++++++++++++++++++++---
- include/linux/mtd/partitions.h |    2 +
- 2 files changed, 49 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -53,10 +53,12 @@ static int bcm63xx_parse_cfe_partitions(
-       struct mtd_partition *parts;
-       int ret;
-       size_t retlen;
--      unsigned int rootfsaddr, kerneladdr, spareaddr;
-+      unsigned int rootfsaddr, kerneladdr, spareaddr, nvramaddr;
-       unsigned int rootfslen, kernellen, sparelen, totallen;
-       unsigned int cfelen, nvramlen;
-       unsigned int cfe_erasesize;
-+      unsigned int caldatalen1 = 0, caldataaddr1 = 0;
-+      unsigned int caldatalen2 = 0, caldataaddr2 = 0;
-       int i;
-       u32 computed_crc;
-       bool rootfs_first = false;
-@@ -70,6 +72,24 @@ static int bcm63xx_parse_cfe_partitions(
-       cfelen = cfe_erasesize;
-       nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
-       nvramlen = roundup(nvramlen, cfe_erasesize);
-+      nvramaddr = master->size - nvramlen;
-+
-+      if (data) {
-+              if (data->caldata[0]) {
-+                      caldatalen1 = cfe_erasesize;
-+                      caldataaddr1 = rounddown(data->caldata[0],
-+                                               cfe_erasesize);
-+              }
-+              if (data->caldata[1]) {
-+                      caldatalen2 = cfe_erasesize;
-+                      caldataaddr2 = rounddown(data->caldata[1],
-+                                               cfe_erasesize);
-+              }
-+              if (caldataaddr1 == caldataaddr2) {
-+                      caldataaddr2 = 0;
-+                      caldatalen2 = 0;
-+              }
-+      }
-       /* Allocate memory for buffer */
-       buf = vmalloc(sizeof(struct bcm_tag));
-@@ -121,7 +141,7 @@ static int bcm63xx_parse_cfe_partitions(
-               rootfsaddr = 0;
-               spareaddr = cfelen;
-       }
--      sparelen = master->size - spareaddr - nvramlen;
-+      sparelen = min_not_zero(nvramaddr, caldataaddr1) - spareaddr;
-       /* Determine number of partitions */
-       if (rootfslen > 0)
-@@ -130,6 +150,12 @@ static int bcm63xx_parse_cfe_partitions(
-       if (kernellen > 0)
-               nrparts++;
-+      if (caldatalen1 > 0)
-+              nrparts++;
-+
-+      if (caldatalen2 > 0)
-+              nrparts++;
-+
-       /* Ask kernel for more memory */
-       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-       if (!parts) {
-@@ -167,15 +193,32 @@ static int bcm63xx_parse_cfe_partitions(
-               curpart++;
-       }
-+      if (caldatalen1 > 0) {
-+              if (caldatalen2 > 0)
-+                      parts[curpart].name = "cal_data1";
-+              else
-+                      parts[curpart].name = "cal_data";
-+              parts[curpart].offset = caldataaddr1;
-+              parts[curpart].size = caldatalen1;
-+              curpart++;
-+      }
-+
-+      if (caldatalen2 > 0) {
-+              parts[curpart].name = "cal_data2";
-+              parts[curpart].offset = caldataaddr2;
-+              parts[curpart].size = caldatalen2;
-+              curpart++;
-+      }
-+
-       parts[curpart].name = "nvram";
--      parts[curpart].offset = master->size - nvramlen;
-+      parts[curpart].offset = nvramaddr;
-       parts[curpart].size = nvramlen;
-       curpart++;
-       /* Global partition "linux" to make easy firmware upgrade */
-       parts[curpart].name = "linux";
-       parts[curpart].offset = cfelen;
--      parts[curpart].size = master->size - cfelen - nvramlen;
-+      parts[curpart].size = min_not_zero(nvramaddr, caldataaddr1) - cfelen;
-       for (i = 0; i < nrparts; i++)
-               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -56,10 +56,12 @@ struct device_node;
- /**
-  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
-  * @origin: for RedBoot, start address of MTD device
-+ * @caldata: for CFE, start address of wifi calibration data
-  * @of_node: for OF parsers, device node containing partitioning information
-  */
- struct mtd_part_parser_data {
-       unsigned long origin;
-+      unsigned long caldata[2];
-       struct device_node *of_node;
- };
diff --git a/target/linux/brcm63xx/patches-3.13/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.13/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
deleted file mode 100644 (file)
index 6f913dd..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-From 977f8a30103b9c4992cab8f49357fe0d4274004f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:55:26 +0200
-Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c              |    2 +-
- arch/mips/bcm63xx/dev-flash.c                          |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |    4 +++-
- 3 files changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1036,7 +1036,7 @@ int __init board_register_devices(void)
-       if (board.num_spis)
-               spi_register_board_info(board.spis, board.num_spis);
--      bcm63xx_flash_register();
-+      bcm63xx_flash_register(board.has_caldata, board.caldata);
-       /* count number of LEDs defined by this device */
-       while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,12 +35,15 @@ static struct mtd_partition mtd_partitio
-       }
- };
-+static struct mtd_part_parser_data bcm63xx_parser_data;
-+
- static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
-       .parts                  = mtd_partitions,
-       .part_probe_types       = bcm63xx_part_types,
-+      .pp_data                = &bcm63xx_parser_data,
- };
- static struct resource mtd_resources[] = {
-@@ -62,6 +65,7 @@ static struct platform_device mtd_dev =
- static struct flash_platform_data bcm63xx_flash_data = {
-       .part_probe_types       = bcm63xx_part_types,
-+      .pp_data                = &bcm63xx_parser_data,
- };
- static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -189,9 +193,13 @@ void __init bcm63xx_flash_detect(void)
-       }
- }
--int __init bcm63xx_flash_register(void)
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
- {
-       u32 val;
-+      unsigned int i;
-+
-+      for (i = 0; i < num_caldata; i++)
-+              bcm63xx_parser_data.caldata[i] = caldata[i].caldata_offset;
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -1,6 +1,8 @@
- #ifndef __BCM63XX_FLASH_H
- #define __BCM63XX_FLASH_H
-+#include <board_bcm963xx.h>
-+
- enum {
-       BCM63XX_FLASH_TYPE_PARALLEL,
-       BCM63XX_FLASH_TYPE_SERIAL,
-@@ -9,7 +11,7 @@ enum {
- void bcm63xx_flash_detect(void);
--int __init bcm63xx_flash_register(void);
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
- int bcm63xx_flash_get_type(void);
diff --git a/target/linux/brcm63xx/patches-3.13/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.13/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644 (file)
index cbceaa9..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check) __init;
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -19,6 +19,7 @@
- struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-+      unsigned int    endian_check:1;
- };
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -174,12 +174,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-+      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1066,7 +1066,8 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+                      board.caldata[i].endian_check);
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.13/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.13/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644 (file)
index f4821b6..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1067,7 +1067,7 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
-               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check);
-+                      board.caldata[i].endian_check, board.caldata[i].led_pin);
-       return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -175,13 +175,14 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check)
-+      unsigned endian_check, int led_pin)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@ struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-       unsigned int    endian_check:1;
-+      int             led_pin;
- };
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check) __init;
-+      unsigned endian_check, int led_pin) __init;
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.13/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.13/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644 (file)
index 877b517..0000000
+++ /dev/null
@@ -1,206 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--                 pci-ath9k-fixup.o usb-common.o
-+                 pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -34,6 +34,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- #include <uapi/linux/bcm933xx_hcs.h>
- #include <uapi/linux/bcm963xx_tag.h>
-@@ -1065,9 +1066,19 @@ int __init board_register_devices(void)
-       }
-       /* register any fixups */
--      for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check, board.caldata[i].led_pin);
-+      for (i = 0; i < board.has_caldata; i++) {
-+              switch (board.caldata[i].vendor) {
-+              case PCI_VENDOR_ID_ATHEROS:
-+                      pci_enable_ath9k_fixup(board.caldata[i].slot,
-+                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+                              board.caldata[i].led_pin);
-+                      break;
-+              case PCI_VENDOR_ID_RALINK:
-+                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+                              board.caldata[i].eeprom);
-+                      break;
-+              }
-+      }
-       return 0;
- }
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -193,7 +193,7 @@ void __init bcm63xx_flash_detect(void)
-       }
- }
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
- {
-       u32 val;
-       unsigned int i;
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+      {
-+              .slot = 255,
-+      },
-+      {
-+              .slot = 255,
-+      },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+      unsigned i;
-+      struct rt2x00_platform_data *pdata = NULL;
-+
-+      for (i = 0; i < rt2x00_num_fixups; i++) {
-+              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              pdata = &rt2x00_fixups[i].pdata;
-+              break;
-+      }
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+      rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,7 +11,7 @@ enum {
- void bcm63xx_flash_detect(void);
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
- int bcm63xx_flash_get_type(void);
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- /*
-  * flash mapping
-@@ -16,11 +17,15 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+      unsigned int    vendor;
-       unsigned int    slot;
-       u32             caldata_offset;
-+      /* Atheros */
-       unsigned int    endian_check:1;
-       int             led_pin;
-+      /* Ralink */
-+      char*           eeprom;
- };
- /*
-@@ -45,7 +50,7 @@ struct board_info {
-       unsigned int    has_caldata:2;
-       /* wifi calibration data config */
--      struct ath9k_caldata caldata[2];
-+      struct bcm63xx_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/brcm63xx/patches-3.13/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.13/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644 (file)
index 271119c..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -336,6 +336,9 @@ struct bcm_enet_priv {
-       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-       int sw_port_link[ENETSW_MAX_PORT];
-+      /* platform device for associated switch */
-+      struct platform_device *b53_device;
-+
-       /* used to poll switch port state */
-       struct timer_list swphy_poll;
-       spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1978,7 +1979,8 @@ static int bcm_enet_remove(struct platfo
-       return 0;
- }
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
-       .probe  = bcm_enet_probe,
-       .remove = bcm_enet_remove,
-       .driver = {
-@@ -1987,6 +1989,42 @@ struct platform_driver bcm63xx_enet_driv
-       },
- };
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+      .chip_id = 0x6300,
-+      .big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+      .name           = "b53-switch",
-+      .id             = -1,
-+      .dev            = {
-+              .platform_data = &bcm63xx_b53_pdata,
-+      },
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+      int ret;
-+
-+      bcm63xx_b53_pdata.regs = priv->base;
-+      bcm63xx_b53_pdata.enabled_ports = port_mask;
-+      bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+      ret = platform_device_register(&bcm63xx_b53_dev);
-+      if (!ret)
-+              priv->b53_device = &bcm63xx_b53_dev;
-+
-+      return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+      if (priv->b53_device)
-+              platform_device_unregister(&bcm63xx_b53_dev);
-+
-+      priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2240,29 +2278,6 @@ static int bcm_enetsw_open(struct net_de
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
--      /* reset mib */
--      val = enetsw_readb(priv, ENETSW_GMCR_REG);
--      val |= ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--      val &= ~ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--
--      /* force CPU port state */
--      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--      /* enable switch forward engine */
--      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--      val |= ENETSW_SWMODE_FWD_EN_MASK;
--      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--      /* enable jumbo on all ports */
--      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
-       /* initialize flow control buffer allocation */
-       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2722,6 +2737,9 @@ static int bcm_enetsw_probe(struct platf
-       struct bcm63xx_enetsw_platform_data *pd;
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
-+      unsigned i, num_ports = 0;
-+      u16 port_mask = BIT(8);
-+      u8 val;
-       /* stop if shared driver failed, assume driver->probe will be
-        * called in the same order we register devices (correct ?)
-@@ -2811,6 +2829,43 @@ static int bcm_enetsw_probe(struct platf
-       priv->pdev = pdev;
-       priv->net_dev = dev;
-+      /* reset mib */
-+      val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+      val |= ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+      val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+
-+      /* force CPU port state */
-+      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+      /* enable switch forward engine */
-+      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+      val |= ENETSW_SWMODE_FWD_EN_MASK;
-+      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+      /* enable jumbo on all ports */
-+      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+              if (!port->used)
-+                      continue;
-+
-+              num_ports++;
-+              port_mask |= BIT(i);
-+      }
-+
-+      /* only register if there is more than one external port */
-+      if (num_ports > 1)
-+              bcmenet_switch_register(priv, port_mask);
-+
-       return 0;
- out_put_clk:
-@@ -2839,6 +2894,9 @@ static int bcm_enetsw_remove(struct plat
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
-+      /* remove switch */
-+      bcmenet_switch_unregister(priv);
-+
-       /* release device resources */
-       iounmap(priv->base);
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/brcm63xx/patches-3.13/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-3.13/424-bcm63xx_enet_no_request_mem_region.patch
deleted file mode 100644 (file)
index 24dd27a..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2784,12 +2784,6 @@ static int bcm_enetsw_probe(struct platf
-       if (ret)
-               goto out;
--      if (!request_mem_region(res_mem->start, resource_size(res_mem),
--                              "bcm63xx_enetsw")) {
--              ret = -EBUSY;
--              goto out;
--      }
--
-       priv->base = ioremap(res_mem->start, resource_size(res_mem));
-       if (priv->base == NULL) {
-               ret = -ENOMEM;
diff --git a/target/linux/brcm63xx/patches-3.13/500-board-D4PW.patch b/target/linux/brcm63xx/patches-3.13/500-board-D4PW.patch
deleted file mode 100644 (file)
index ffeb8c9..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -555,6 +555,56 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+      .name                           = "D-4P-W",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .has_uart0                      = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "D-4P-W:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "D-4P-W::status",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "D-4P-W:green:internet",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "D-4P-W:red:internet",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -733,6 +783,7 @@ static const struct board_info __initcon
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-+      &board_96348_D4PW,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.13/501-board-NB4.patch
deleted file mode 100644 (file)
index 20d398c..0000000
+++ /dev/null
@@ -1,655 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -49,6 +51,12 @@
- #define CFE_OFFSET_64K                        0x10000
- #define CFE_OFFSET_128K                       0x20000
-+#define NB4_PID_OFFSET                0xff80
-+#define NB4_74X164_GPIO_BASE  64
-+#define NB4_SPI_GPIO_MOSI     7
-+#define NB4_SPI_GPIO_CLK      6
-+#define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
-+
- static struct board_info board;
- /*
-@@ -755,6 +763,601 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+
-+struct spi_gpio_platform_data nb4_spi_gpio_data = {
-+      .sck            = NB4_SPI_GPIO_CLK,
-+      .mosi           = NB4_SPI_GPIO_MOSI,
-+      .miso           = SPI_GPIO_NO_MISO,
-+      .num_chipselect = 1,
-+};
-+
-+
-+static struct platform_device nb4_spi_gpio = {
-+      .name = "spi_gpio",
-+      .id   = 1,
-+      .dev = {
-+              .platform_data = &nb4_spi_gpio_data,
-+      },
-+};
-+
-+static struct platform_device * __initdata nb4_devices[] = {
-+      &nb4_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
-+      .base = NB4_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info nb4_spi_devices[] = {
-+      {
-+              .modalias = "74x164",
-+              .max_speed_hz = 781000,
-+              .bus_num = 1,
-+              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+              .mode = SPI_MODE_0,
-+              .platform_data = &nb4_74x164_platform_data
-+      }
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+      .name                           = "NB4-SER-r0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-SER-r0:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:red:service",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:green:service",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:blue:service",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+      .name                           = "NB4-SER-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-SER-r1:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:red:service",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:green:service",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:blue:service",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+      .name                           = "NB4-SER-r2",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-SER-r2:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:red:service",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:green:service",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:blue:service",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+      .name                           = "NB4-FXC-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-FXC-r1:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:wifi",
-+                      .gpio           = 15,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:red:service",
-+                      .gpio           = 29,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:green:service",
-+                      .gpio           = 30,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:blue:service",
-+                      .gpio           = 4,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+      .name                           = "NB4-FXC-r2",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-FXC-r2:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:wifi",
-+                      .gpio           = 15,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:red:service",
-+                      .gpio           = 29,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:green:service",
-+                      .gpio           = 30,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:blue:service",
-+                      .gpio           = 4,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
- #endif
- /*
-@@ -791,6 +1394,11 @@ static const struct board_info __initcon
-       &board_96358vw2,
-       &board_AGPFS0,
-       &board_DWVS0,
-+      &board_nb4_ser_r0,
-+      &board_nb4_ser_r1,
-+      &board_nb4_ser_r2,
-+      &board_nb4_fxc_r1,
-+      &board_nb4_fxc_r2,
- #endif
- };
-@@ -845,6 +1453,16 @@ static void __init boardid_fixup(u8 *boo
-       struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-       char *board_name = (char *)bcm63xx_nvram_get_name();
-+      if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
-+              u8 *p = boot_addr + NB4_PID_OFFSET;
-+
-+              /* Extract nb4 PID */
-+              if (!memcmp(p, "NB4-", 4)) {
-+                      memcpy(board_name, p, sizeof("NB4-XXX-rX"));
-+                      return;
-+              }
-+      }
-+
-       /* check if bcm_tag is at 64k offset */
-       if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-               /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.13/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.13/502-board-96338W2_E7T.patch
deleted file mode 100644 (file)
index 08f856b..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -226,6 +226,40 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+      .name                           = "96338W2_E7T",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+              .leds = {
-+              {
-+                      .name           = "96338W2_E7T:green:ppp",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96338W2_E7T:green:ppp-fail",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96338W2_E7T:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1373,6 +1407,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-       &board_96338w,
-+      &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.13/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.13/503-board-CPVA642.patch
deleted file mode 100644 (file)
index fde7f8b..0000000
+++ /dev/null
@@ -1,109 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -754,6 +754,98 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_CPVA642 = {
-+      .name                           = "CPVA642",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "CPVA642:red:power",
-+                      .gpio           = 14,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:power",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "CPVA642:red:wifi",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:wifi",
-+                      .gpio           = 28,
-+                      .active_low     = 0,
-+              },
-+              {
-+                      .name           = "CPVA642:red:link",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:link",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:ether",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:phone1",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:phone2",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:usb",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+    },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
-@@ -1428,6 +1520,7 @@ static const struct board_info __initcon
-       &board_96358vw,
-       &board_96358vw2,
-       &board_AGPFS0,
-+      &board_CPVA642,
-       &board_DWVS0,
-       &board_nb4_ser_r0,
-       &board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.13/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.13/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644 (file)
index a6fff9b..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -890,6 +890,61 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+      .name                           = "AW4139",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "dsl-274xb:green:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "dsl-274xb:red:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:adsl",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:internet",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "dsl-274xb:red:internet",
-+                      .gpio           = 10,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- struct spi_gpio_platform_data nb4_spi_gpio_data = {
-       .sck            = NB4_SPI_GPIO_CLK,
-       .mosi           = NB4_SPI_GPIO_MOSI,
-@@ -1522,6 +1577,7 @@ static const struct board_info __initcon
-       &board_AGPFS0,
-       &board_CPVA642,
-       &board_DWVS0,
-+      &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_ser_r1,
-       &board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.13/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.13/505-board_spw500v.patch
deleted file mode 100644 (file)
index 394506b..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -647,6 +647,67 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_spw500v = {
-+      .name                           = "SPW500V",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .has_dsp                        = 1,
-+      .dsp = {
-+              .gpio_rst               = 6,
-+              .gpio_int               = 34,
-+              .ext_irq                = 2,
-+              .cs                     = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "SPW500V:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "SPW500V:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "SPW500V:green:ppp",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {       .name           = "SPW500V:green:pstn",
-+                      .gpio           = 28,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "SPW500V:green:voip",
-+                      .gpio           = 32,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1569,6 +1630,7 @@ static const struct board_info __initcon
-       &board_96348gw_a,
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-+      &board_spw500v,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.13/506-board_gw6200_gw6000.patch
deleted file mode 100644 (file)
index 1f66a2d..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -514,6 +514,112 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_gw6200 = {
-+      .name                           = "GW6200",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .has_dsp                        = 1,
-+              .dsp = {
-+              .gpio_rst               = 8, /* FIXME: What is real GPIO here? */
-+              .gpio_int               = 34,
-+              .ext_irq                = 2,
-+              .cs                     = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "GW6200:green:line1",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "GW6200:green:line2",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "GW6200:green:line3",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "GW6200:green:tel",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+      .name                           = "GW6000",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .has_dsp                        = 1,
-+      .dsp = {
-+              .gpio_rst               = 6,
-+              .gpio_int               = 34,
-+              .ext_irq                = 2,
-+              .cs                     = 2,
-+      },
-+
-+      /* GW6000 has no GPIO-controlled leds */
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
-@@ -1623,6 +1729,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-       &board_96348gw,
-+      &board_gw6000,
-+      &board_gw6200,
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.13/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.13/507-board-MAGIC.patch
deleted file mode 100644 (file)
index 55f976c..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -814,6 +814,78 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+      .name                           = "MAGIC",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              /* it has BP_ENET_EXTERNAL_PHY */
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_dsp                        = 1,
-+      .dsp = {
-+              .gpio_rst               = 25,
-+              .gpio_int               = 34,
-+              .cs                     = 2,
-+              .ext_irq                = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "MAGIC:green:voip",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:adsl",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:wifi",
-+                      .gpio           = 28,
-+              },
-+              {
-+                      .name           = "MAGIC:green:usb",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:hpna",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "MAGIC:green:stop",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1739,6 +1811,7 @@ static const struct board_info __initcon
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-       &board_spw500v,
-+      &board_96348sv,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.13/508-board_hw553.patch
deleted file mode 100644 (file)
index b7506e0..0000000
+++ /dev/null
@@ -1,94 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1778,6 +1778,83 @@ static struct board_info __initdata boar
-       .spis = nb4_spi_devices,
-       .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+      .name                           = "HW553",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .leds = {
-+              {
-+                      .name           = "HW553:red:lan",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:blue:lan",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:adsl",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:blue:adsl",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+
-+              {
-+                      .name           = "HW553:blue:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:wifi",
-+                      .gpio           = 25,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:internetkey",
-+                      .gpio           = 12,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:blue:internetkey",
-+                      .gpio           = 13,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1826,6 +1903,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r2,
-       &board_nb4_fxc_r1,
-       &board_nb4_fxc_r2,
-+      &board_HW553,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.13/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.13/509-board_rta1320_16m.patch
deleted file mode 100644 (file)
index 3683825..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -260,6 +260,45 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+      .name                           = "RTA1320_16M",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+              .leds = {
-+              {
-+                      .name           = "RTA1320_16M:green:adsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA1320_16M:green:ppp",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA1320_16M:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "RTA1320_16M:green:stop",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1871,6 +1910,7 @@ static const struct board_info __initcon
-       &board_96338gw,
-       &board_96338w,
-       &board_96338w2_e7t,
-+      &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.13/510-board_spw303v.patch b/target/linux/brcm63xx/patches-3.13/510-board_spw303v.patch
deleted file mode 100644 (file)
index 61ab794..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1894,6 +1894,72 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+      .name                   = "96358-502V",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0              = 1,
-+      .has_enet0              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "spw303v:green:power+adsl",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:red:power+adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:ppp",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:ses",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:voip",
-+                      .gpio           = 27,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:pots",
-+                      .gpio           = 31,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 11,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "ses",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      }
-+};
- #endif
- /*
-@@ -1944,6 +2010,7 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r1,
-       &board_nb4_fxc_r2,
-       &board_HW553,
-+      &board_spw303v,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.13/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.13/511-board_V2500V.patch
deleted file mode 100644 (file)
index f4cfc6e..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -925,6 +925,65 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+      .name                           = "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_uart0                      = 1,
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "V2500V_BB:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "V2500V_BB:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2500V_BB:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {       .name           = "V2500V_BB:green:ppp",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2500V_BB:green:wireless",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 31,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1995,6 +2054,7 @@ static const struct board_info __initcon
-       &board_96348_D4PW,
-       &board_spw500v,
-       &board_96348sv,
-+      &board_V2500V_BB,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -2116,6 +2176,22 @@ void __init board_prom_init(void)
-               val &= MPI_CSBASE_BASE_MASK;
-       }
-       boot_addr = (u8 *)KSEG1ADDR(val);
-+      printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+      /* Do an early check of CFE and then select bank 0 */
-+
-+      if (boot_addr == (u8 *)0xbf800000) {
-+              u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+                      printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
-+                      boot_addr = tmp_boot_addr;
-+              }
-+      }
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -19,6 +19,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_hsspi.h>
-@@ -207,6 +208,13 @@ int __init bcm63xx_flash_register(int nu
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-               val &= MPI_CSBASE_BASE_MASK;
-+              /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+              /* Loading from CFE always uses Bank 0 */
-+              if (!strcmp(board_get_name(), "V2500V_BB")) {
-+                      pr_info("V2500V: Start in Bank 0\n");
-+                      val = val + 0x400000; // Select Bank 0 start address
-+              }
-+
-               mtd_resources[0].start = val;
-               mtd_resources[0].end = 0x1FFFFFFF;
diff --git a/target/linux/brcm63xx/patches-3.13/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.13/512-board_BTV2110.patch
deleted file mode 100644 (file)
index c68a48b..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -485,6 +485,64 @@ static struct board_info __initdata boar
-       },
- };
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+      .name                           = "V2110",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "V2110:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "V2110:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2110:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {       .name           = "V2110:green:ppp",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2110:green:wireless",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -2055,6 +2113,7 @@ static const struct board_info __initcon
-       &board_spw500v,
-       &board_96348sv,
-       &board_V2500V_BB,
-+      &board_V2110,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/513-board_livebox.patch b/target/linux/brcm63xx/patches-3.13/513-board_livebox.patch
deleted file mode 100644 (file)
index 2323b5e..0000000
+++ /dev/null
@@ -1,390 +0,0 @@
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
-       select SSB
-        help
-+config BOARD_LIVEBOX
-+      bool "Inventel Livebox(es) boards"
-+      select SSB
-+      help
-+       Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,369 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board_livebox: "
-+
-+#define LIVEBOX_KEYS_POLL_INTERVAL    20
-+#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL        (LIVEBOX_KEYS_POLL_INTERVAL * 3)
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+      .name                           = "Livebox-blue-5g",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+                .has_phy              = 1,
-+                .phy_id               = 31,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+
-+      .has_dsp                        = 0, /*TODO some Liveboxes have dsp*/
-+      .dsp = {
-+              .gpio_rst               = 6, /*FIXME eth1 shares gpio6 with dsp?*/
-+              .gpio_int               = 35,
-+              .cs                     = 2,
-+              .ext_irq                = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "Livebox-blue-5g::adsl-fail",
-+                      .gpio           = 0,
-+                      .active_low     = 0,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::adsl",
-+                      .gpio           = 1,
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::phone",
-+                      .gpio           = 3,
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::wifi",
-+                      .gpio           = 4,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "BTN_1",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "BTN_2",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_2,
-+                      .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+
-+      },
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      &board_livebox_blue5g
-+#endif
-+};
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int board_get_mac_address(u8 *mac)
-+{
-+      u8 *p;
-+      int count;
-+
-+      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+      p = mac + ETH_ALEN - 1;
-+      count = mac_addr_used;
-+
-+      while (count--) {
-+              do {
-+                      (*p)++;
-+                      if (*p != 0)
-+                              break;
-+                      p--;
-+              } while (p != mac);
-+      }
-+
-+      if (p == mac) {
-+              printk(KERN_ERR PFX "unable to fetch mac address\n");
-+              return -ENODEV;
-+      }
-+        mac_addr_used++;
-+
-+      return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
-+#define LIVEBOX_BOOT_ADDR             0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9           0x90
-+
-+void __init board_prom_init(void)
-+{
-+      u32 val;
-+      u8 hw_version;
-+
-+      /* Get hardware version */
-+      val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+      val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+      bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+      hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
-+      switch (hw_version) {
-+      case LIVEBOX_HW_BLUE5G_9:
-+              printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+              memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+              break;
-+      default:
-+              printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
-+              break;
-+      }
-+
-+      /* use default livebox configuration */
-+      memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+#ifdef CONFIG_PCI
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+#endif
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+                      printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
-+                      gpio_request(6, "dsp_eth_rst");
-+                      gpio_direction_output(6, 0);
-+                      gpio_set_value(6, 1);
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct physmap_flash_data flash_data = {
-+      .width                  = 2,
-+};
-+
-+static struct resource mtd_resources[] = {
-+      {
-+              .start          = 0,    /* filled at runtime */
-+              .end            = 0,    /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      }
-+};
-+
-+static struct platform_device mtd_dev = {
-+      .name                   = "physmap-flash",
-+      .resource               = mtd_resources,
-+      .num_resources          = ARRAY_SIZE(mtd_resources),
-+      .dev                    = {
-+              .platform_data  = &flash_data,
-+      },
-+};
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+      .name                   = "leds-gpio",
-+      .id                     = 0,
-+      .dev.platform_data      = &bcm63xx_led_data,
-+};
-+
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+      .poll_interval  = LIVEBOX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+      .name           = "gpio-keys-polled",
-+      .id             = 0,
-+      .dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      u32 val;
-+      int led_count = 0;
-+      int button_count = 0;
-+
-+      if (board.has_uart0)
-+              bcm63xx_uart_register(0);
-+
-+      if (board.has_uart1)
-+              bcm63xx_uart_register(1);
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !board_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !board_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      if (board.has_dsp)
-+              bcm63xx_dsp_register(&board.dsp);
-+
-+      bcm63xx_spi_register();
-+
-+      if (board.num_devs)
-+              platform_add_devices(board.devs, board.num_devs);
-+
-+      if (board.num_spis)
-+              spi_register_board_info(board.spis, board.num_spis);
-+
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+      if (val != LIVEBOX_BOOT_ADDR)
-+              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+                      val, LIVEBOX_BOOT_ADDR);
-+      mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
-+      mtd_resources[0].end = 0x1ebfffff;
-+
-+      platform_device_register(&mtd_dev);
-+
-+      /* count number of LEDs defined by this device */
-+      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+              led_count++;
-+
-+      bcm63xx_led_data.num_leds = led_count;
-+      bcm63xx_led_data.leds = board.leds;
-+
-+      platform_device_register(&bcm63xx_gpio_leds);
-+
-+      /* count number of BUTTONs defined by this device */
-+      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+              button_count++;
-+
-+      if (button_count) {
-+              bcm63xx_gpio_keys_data.nbuttons = button_count;
-+              bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+              platform_device_register(&bcm63xx_gpio_keys_device);
-+      }
-+
-+      return 0;
-+}
diff --git a/target/linux/brcm63xx/patches-3.13/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.13/514-board_ct536_ct5621.patch
deleted file mode 100644 (file)
index 10d0d47..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -543,6 +543,51 @@ static struct board_info __initdata boar
- };
-+static struct board_info __initdata board_ct536_ct5621 = {
-+      .name                           = "CT536_CT5621",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 0,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "CT536_CT5621:green:adsl-fail",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT536_CT5621:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -2114,6 +2159,7 @@ static const struct board_info __initcon
-       &board_96348sv,
-       &board_V2500V_BB,
-       &board_V2110,
-+      &board_ct536_ct5621,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.13/515-board_DWV-S0_fixes.patch
deleted file mode 100644 (file)
index c8825c0..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1313,6 +1313,8 @@ static struct board_info __initdata boar
-       .name                           = "DWV-S0",
-       .expected_cpu_id                = 0x6358,
-+      .has_uart0                      = 1,
-+
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -1328,6 +1330,7 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.13/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.13/516-board_96348A-122.patch
deleted file mode 100644 (file)
index d3017dc..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -588,6 +588,69 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96348A_122 = {
-+      .name                           = "96348A-122",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "96348A-122:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96348A-122:red:alarm",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348A-122:green:wps",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wlan",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WLAN,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -2163,6 +2226,7 @@ static const struct board_info __initcon
-       &board_V2500V_BB,
-       &board_V2110,
-       &board_ct536_ct5621,
-+      &board_96348A_122,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/517-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.13/517-RTA1205W_16_uart_fixes.patch
deleted file mode 100644 (file)
index c375614..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -853,6 +853,7 @@ static struct board_info __initdata boar
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-+      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
diff --git a/target/linux/brcm63xx/patches-3.13/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.13/519_board_CPVA502plus.patch
deleted file mode 100644 (file)
index b5ae101..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1151,6 +1151,46 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_CPVA502plus = {
-+      .name                           = "CPVA502+",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "CPVA502+:green:phone",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA502+:green:link",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
-+
- #endif
- /*
-@@ -2228,6 +2268,7 @@ static const struct board_info __initcon
-       &board_V2110,
-       &board_ct536_ct5621,
-       &board_96348A_122,
-+      &board_CPVA502plus,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.13/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644 (file)
index 8ff14ae..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2232,6 +2232,85 @@ static struct board_info __initdata boar
- #endif
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+      .name                           = "96368MVWG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port1",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0x12,
-+                              .name   = "port0",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 0x11,
-+                              .name   = "port3",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "96368MVWG:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVWG:green:ppp",
-+                      .gpio           = 5,
-+              },
-+              {
-+                      .name           = "96368MVWG:green:power",
-+                      .gpio           = 22,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96368MVWG:green:wps",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVWG:red:ppp-fail",
-+                      .gpio           = 31,
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+#endif
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -2286,6 +2365,10 @@ static const struct board_info __initcon
-       &board_HW553,
-       &board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_96368mvwg,
-+#endif
- };
- /*
-@@ -2467,12 +2550,25 @@ void __init board_prom_init(void)
-               bcm63xx_pci_enabled = 1;
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G2_PCI;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCI_REQ1 |
-+                              GPIO_MODE_6368_PCI_GNT1 |
-+                              GPIO_MODE_6368_PCI_INTB |
-+                              GPIO_MODE_6368_PCI_REQ0 |
-+                              GPIO_MODE_6368_PCI_GNT0;
-       }
- #endif
-       if (board.has_pccard) {
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+                              GPIO_MODE_6368_PCMCIA_CD2 |
-+                              GPIO_MODE_6368_PCMCIA_VS1 |
-+                              GPIO_MODE_6368_PCMCIA_VS2;
-       }
-       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-3.13/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-3.13/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644 (file)
index f297096..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2308,6 +2308,72 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+      .name                           = "96368MVNgr",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "96368MVNgr:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:inet",
-+                      .gpio           = 5,
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:power",
-+                      .gpio           = 22,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:wps",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:inet-fail",
-+                      .gpio           = 3,
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
- #endif
- /*
-@@ -2368,6 +2434,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-+      &board_96368mvngr,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.13/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-3.13/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644 (file)
index c8c098d..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -108,13 +108,45 @@ static struct board_info __initdata boar
-               .port_no                = 0,
-       },
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-       .leds = {
-               {
--                      .name           = "96328avng::ppp-fail",
-+                      .name           = "96328avng::internet-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
-+                      .name           = "96328avng::dsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-                       .name           = "96328avng::power",
-                       .gpio           = 4,
-                       .active_low     = 1,
-@@ -131,7 +163,7 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "96328avng::ppp",
-+                      .name           = "96328avng::internet",
-                       .gpio           = 11,
-                       .active_low     = 1,
-               },
diff --git a/target/linux/brcm63xx/patches-3.13/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-3.13/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644 (file)
index 114778d..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -169,6 +169,76 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+      .name                           = "963281TAN",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "963281TAN::internet",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "963281TAN::internet-fail",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::power-fail",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::wps",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::dsl",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+
-+      },
-+};
- #endif
- /*
-@@ -2417,6 +2487,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.13/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.13/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644 (file)
index 3d5b5d1..0000000
+++ /dev/null
@@ -1,132 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -239,6 +239,111 @@ static struct board_info __initdata boar
-       },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+      .name                           = "AW4339U",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor         = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset = 0x7d1000,
-+                      .slot           = 0,
-+                      .led_pin        = -1,
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 1",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "dsl-274xb:red:internet",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:dsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "dsl-274xb:red:power",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:blue:wps",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:internet",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "wifi",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 24,
-+                      .active_low     = 1,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -2488,6 +2593,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.13/525-board_96348w3.patch b/target/linux/brcm63xx/patches-3.13/525-board_96348w3.patch
deleted file mode 100644 (file)
index 52134d4..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1398,6 +1398,59 @@ static struct board_info __initdata boar
-       },
- };
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+      .name                           = "96348W3",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "96348W3:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96348W3:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348W3::adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348W3::internet",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+                      {
-+                      .desc           = "reset",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      },
-+      },
-+};
-+
- #endif
- /*
-@@ -2623,6 +2676,7 @@ static const struct board_info __initcon
-       &board_ct536_ct5621,
-       &board_96348A_122,
-       &board_CPVA502plus,
-+      &board_96348W3,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.13/526-board_CT6373-1.patch
deleted file mode 100644 (file)
index cd0122b..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -57,6 +57,13 @@
- #define NB4_SPI_GPIO_CLK      6
- #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
-+#define CT6373_PID_OFFSET             0xff80
-+#define CT6373_74X164_GPIO_BASE       64
-+#define CT6373_SPI_GPIO_MOSI  7
-+#define CT6373_SPI_GPIO_CLK           6
-+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
-+
-+
- static struct board_info board;
- /*
-@@ -2347,6 +2354,113 @@ static struct board_info __initdata boar
-       .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
-+      .sck            = CT6373_SPI_GPIO_CLK,
-+      .mosi           = CT6373_SPI_GPIO_MOSI,
-+      .miso           = SPI_GPIO_NO_MISO,
-+      .num_chipselect = 1,
-+};
-+
-+static struct platform_device ct6373_spi_gpio = {
-+      .name = "spi_gpio",
-+      .id   = 1,
-+      .dev = {
-+              .platform_data = &ct6373_spi_gpio_data,
-+      },
-+};
-+
-+static struct platform_device * __initdata ct6373_devices[] = {
-+      &ct6373_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
-+      .base = CT6373_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info ct6373_spi_devices[] = {
-+      {
-+              .modalias = "74x164",
-+              .max_speed_hz = 781000,
-+              .bus_num = 1,
-+              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+              .mode = SPI_MODE_0,
-+              .platform_data = &ct6373_74x164_platform_data
-+      }
-+};
-+
-+static struct board_info __initdata board_ct6373_1 = {
-+      .name                           = "CT6373-1",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "CT6373-1:green:power",
-+                      .gpio           = 0,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "CT6373-1:green:usb",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:wlan",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:adsl",
-+                      .gpio           = CT6373_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:line",
-+                      .gpio           = CT6373_74HC64_GPIO(1),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:fxs1",
-+                      .gpio           = CT6373_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:fxs2",
-+                      .gpio           = CT6373_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+
-+      .devs = ct6373_devices,
-+      .num_devs = ARRAY_SIZE(ct6373_devices),
-+      .spis = ct6373_spi_devices,
-+      .num_spis = ARRAY_SIZE(ct6373_spi_devices),
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -2691,6 +2805,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r2,
-       &board_nb4_fxc_r1,
-       &board_nb4_fxc_r2,
-+      &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
- #endif
diff --git a/target/linux/brcm63xx/patches-3.13/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.13/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644 (file)
index a555298..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2603,6 +2603,73 @@ static struct board_info __initdata boar
-               },
-       }
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+      .name                   = "DVAG3810BN",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0              = 1,
-+      .has_enet0              = 1,
-+      .has_enet1              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 0,
-+              .use_internal_phy       = 1,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0              = 1,
-+      .has_pccard             = 1,
-+      .has_ehci0              = 1,
-+
-+      .leds = {
-+              {
-+                      .name   = "DVAG3810BN::voip",
-+                      .gpio   = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::dsl",
-+                      .gpio   = 22,
-+                      .active_low  = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::internet",
-+                      .gpio   = 23,
-+                      .active_low  = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::power",
-+                      .gpio   = 4,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name   = "DVAG3810BN::stop",
-+                      .gpio   = 5,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc   = "reset",
-+                      .gpio   = 34,
-+                      .active_low = 1,
-+                      .type   = EV_KEY,
-+                      .code   = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -2808,6 +2875,7 @@ static const struct board_info __initcon
-       &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
-+      &board_DVAG3810BN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.13/528-board_nb6.patch b/target/linux/brcm63xx/patches-3.13/528-board_nb6.patch
deleted file mode 100644 (file)
index 66705fa..0000000
+++ /dev/null
@@ -1,147 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-+#include <linux/rtl8367.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -56,6 +57,8 @@
- #define NB4_SPI_GPIO_MOSI     7
- #define NB4_SPI_GPIO_CLK      6
- #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
-+#define NB6_GPIO_RTL8367_SDA  18
-+#define NB6_GPIO_RTL8367_SCK  20
- #define CT6373_PID_OFFSET             0xff80
- #define CT6373_74X164_GPIO_BASE       64
-@@ -2672,6 +2675,104 @@ static struct board_info __initdata boar
- };
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
-+      .mode = RTL8367_EXTIF_MODE_RGMII,
-+      .txdelay = 1,
-+      .rxdelay = 5,
-+      .ability = {
-+              .force_mode = 1,
-+              .txpause = 1,
-+              .rxpause = 1,
-+              .link = 1,
-+              .duplex = 1,
-+              .speed = RTL8367_PORT_SPEED_1000,
-+      },
-+};
-+
-+static struct rtl8367_platform_data nb6_rtl8367_data = {
-+      .gpio_sda       = NB6_GPIO_RTL8367_SDA,
-+      .gpio_sck       = NB6_GPIO_RTL8367_SCK,
-+      .extif0_cfg     = &nb6_rtl8367_extif0_cfg,
-+};
-+
-+static struct platform_device nb6_rtl8367_device = {
-+      .name           = RTL8367_DRIVER_NAME,
-+      .id             = -1,
-+      .dev = {
-+              .platform_data  = &nb6_rtl8367_data,
-+      }
-+};
-+
-+static struct platform_device * __initdata nb6_devices[] = {
-+      &nb6_rtl8367_device,
-+};
-+
-+static struct board_info __initdata board_nb6 = {
-+      .name                           = "NB6",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name   = "RGMII",
-+                      },
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 24,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 25,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "wlan",
-+                      .gpio           = 12,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WLAN,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 10,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .devs = nb6_devices,
-+      .num_devs = ARRAY_SIZE(nb6_devices),
-+};
-+#endif
-+
- /*
-  * known 6368 boards
-  */
-@@ -2878,6 +2979,10 @@ static const struct board_info __initcon
-       &board_DVAG3810BN,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      &board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-@@ -2945,6 +3050,11 @@ static void __init boardid_fixup(u8 *boo
-               }
-       }
-+      if (BCMCPU_IS_6362() && (!strncmp(board_name, "NB6-", sizeof("NB6-") - 1))) {
-+              board_name[sizeof("NB6") - 1] = '\0';
-+              return ;
-+      }
-+
-       /* check if bcm_tag is at 64k offset */
-       if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-               /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.13/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.13/529-board_fast2604.patch
deleted file mode 100644 (file)
index 9ebc02a..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1066,6 +1066,57 @@ static struct board_info __initdata boar
-       .has_ehci0                      = 1,
- };
-+static struct board_info __initdata board_FAST2604 = {
-+      .name                                           = "F@ST2604",
-+      .expected_cpu_id                        = 0x6348,
-+
-+      .has_uart0                                      = 1,
-+      .has_pci                                        = 1,
-+      .has_ohci0                                      = 1,
-+
-+      .has_enet1                                      = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                           = "F@ST2604:green:power",
-+                      .gpio                           = 0,
-+                      .active_low                     = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                           = "F@ST2604:red:power",
-+                      .gpio                           = 1,
-+                      .active_low                     = 1,
-+              },
-+              {
-+                      .name                           = "F@ST2604:red:inet",
-+                      .gpio                           = 4,
-+                      .active_low                     = 1,
-+              },
-+              {
-+                      .name                           = "F@ST2604:green:wps",
-+                      .gpio                           = 5,
-+                      .active_low                     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc                           = "reset",
-+                      .gpio                           = 33,
-+                      .active_low                     = 1,
-+                      .type                           = EV_KEY,
-+                      .code                           = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-@@ -2947,6 +2998,7 @@ static const struct board_info __initcon
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-+      &board_FAST2604,
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
diff --git a/target/linux/brcm63xx/patches-3.13/530-board_963281T_TEF.patch b/target/linux/brcm63xx/patches-3.13/530-board_963281T_TEF.patch
deleted file mode 100644 (file)
index d490f28..0000000
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -250,6 +250,126 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_963281T_TEF = {
-+      .name                                   = "963281T_TEF",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "963281T_TEF:green:power",
-+                      .gpio                   = 4,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:power",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:inet",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:inet",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:ppp",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:ppp",
-+                      .gpio                   = 5,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:3g",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:3g",
-+                      .gpio                   = 7,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:wlan",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:eth",
-+                      .gpio                   = 31,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:eth",
-+                      .gpio                   = 20,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 24,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
-       .name                           = "AW4339U",
-       .expected_cpu_id                = 0x6328,
-@@ -2979,6 +3099,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_963281T_TEF,
-       &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.13/531-board_96328A-1441N1.patch b/target/linux/brcm63xx/patches-3.13/531-board_96328A-1441N1.patch
deleted file mode 100644 (file)
index 12a0887..0000000
+++ /dev/null
@@ -1,90 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -180,6 +180,79 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96328A_1441N1 = {
-+      .name                                   = "96328A-1441N1",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "96328A-1441N1:green:power",
-+                      .gpio                   = 8,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:red:power",
-+                      .gpio                   = 4,
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:green:inet",
-+                      .gpio                   = 7,
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:red:inet",
-+                      .gpio                   = 1,
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:green:dsl",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
-       .name                           = "963281TAN",
-       .expected_cpu_id                = 0x6328,
-@@ -3098,6 +3171,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_96328A_1441N1,
-       &board_963281TAN,
-       &board_963281T_TEF,
-       &board_dsl_274xb_f1,
diff --git a/target/linux/brcm63xx/patches-3.13/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.13/532-board_96328a-1241N.patch
deleted file mode 100644 (file)
index 3648b2a..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -180,6 +180,73 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96328A_1241N = {
-+      .name                                   = "96328A-1241N",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "96328A-1241N:green:power",
-+                      .gpio                   = 4,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "96328A-1241N:red:alarm",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "96328A-1241N:green:inet",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_96328A_1441N1 = {
-       .name                                   = "96328A-1441N1",
-       .expected_cpu_id                        = 0x6328,
-@@ -3171,6 +3238,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_96328A_1241N,
-       &board_96328A_1441N1,
-       &board_963281TAN,
-       &board_963281T_TEF,
diff --git a/target/linux/brcm63xx/patches-3.13/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.13/533-board_rta770bw.patch
deleted file mode 100644 (file)
index 60a670f..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -788,6 +788,55 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+      .name                           = "RTA770BW",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "RTA770BW:green:usb",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770BW:green:adsl",
-+                      .gpio           = 8,
-+              },
-+              {
-+                      .name           = "RTA770BW:green:diag",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770BW:green:wlan",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 13,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -3252,6 +3301,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-+      &board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.13/534-board_hw556.patch b/target/linux/brcm63xx/patches-3.13/534-board_hw556.patch
deleted file mode 100644 (file)
index af8c9d4..0000000
+++ /dev/null
@@ -1,565 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2901,6 +2901,492 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW556 = {
-+      .name                                   = "HW556",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .caldata_offset         = 0xe00000,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+static struct board_info __initdata board_HW556_A = {
-+      .name                                   = "HW556_A",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xeffe00,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:green:lan1",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan2",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 12,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan1",
-+                      .gpio                   = 13,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 15,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan2",
-+                      .gpio                   = 22,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan3",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan3",
-+                      .gpio                   = 26,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan4",
-+                      .gpio                   = 27,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan4",
-+                      .gpio                   = 28,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+static struct board_info __initdata board_HW556_B = {
-+      .name                                   = "HW556_B",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xf7e000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:green:lan1",
-+                      .gpio                   = 12,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan1",
-+                      .gpio                   = 13,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan2",
-+                      .gpio                   = 15,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan2",
-+                      .gpio                   = 22,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan3",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan3",
-+                      .gpio                   = 26,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan4",
-+                      .gpio                   = 27,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan4",
-+                      .gpio                   = 28,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+static struct board_info __initdata board_HW556_C = {
-+      .name                                   = "HW556_C",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xefe000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:green:lan1",
-+                      .gpio                   = 12,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan1",
-+                      .gpio                   = 13,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan2",
-+                      .gpio                   = 15,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan2",
-+                      .gpio                   = 22,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan3",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan3",
-+                      .gpio                   = 26,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:green:lan4",
-+                      .gpio                   = 27,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:lan4",
-+                      .gpio                   = 28,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
-       .name                   = "96358-502V",
-@@ -3340,6 +3826,10 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r2,
-       &board_ct6373_1,
-       &board_HW553,
-+      &board_HW556,
-+      &board_HW556_A,
-+      &board_HW556_B,
-+      &board_HW556_C,
-       &board_spw303v,
-       &board_DVAG3810BN,
- #endif
-@@ -3405,13 +3895,37 @@ static void __init boardid_fixup(u8 *boo
-       struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-       char *board_name = (char *)bcm63xx_nvram_get_name();
--      if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
--              u8 *p = boot_addr + NB4_PID_OFFSET;
--
--              /* Extract nb4 PID */
--              if (!memcmp(p, "NB4-", 4)) {
--                      memcpy(board_name, p, sizeof("NB4-XXX-rX"));
--                      return;
-+      if (BCMCPU_IS_6358()) {
-+              if (!strcmp(board_name, "96358VW")) {
-+                      u8 *p = boot_addr + NB4_PID_OFFSET;
-+
-+                      /* Extract nb4 PID */
-+                      if (!memcmp(p, "NB4-", 4)) {
-+                              memcpy(board_name, p, sizeof("NB4-XXX-rX"));
-+                              return;
-+                      }
-+              } else if (!strcmp(board_name, "HW556")) {
-+                      /*
-+                       * HW556 has different wlan caldatas depending on
-+                       * hardware version.
-+                       * Detect hardware version and change board id
-+                       */
-+                      u8 cal_data_ath9k[4] = { 0xa5, 0x5a, 0, 0 };
-+                      u8 cal_data_rt3062[4] = { 0x62, 0x30, 1, 0 };
-+
-+                      if (!memcmp(boot_addr + 0xeffe00,
-+                                  &cal_data_rt3062, 4)) {
-+                              /* Ralink 0xeffe00 */
-+                              memcpy(board_name, "HW556_A", 7);
-+                      } else if (!memcmp(boot_addr + 0xf7e000,
-+                                         &cal_data_ath9k, 4)) {
-+                              /* Atheros 0xf7e000 */
-+                              memcpy(board_name, "HW556_B", 7);
-+                      } else if (!memcmp(boot_addr + 0xefe000,
-+                                         &cal_data_ath9k, 4)) {
-+                              /* Atheros 0xefe000 */
-+                              memcpy(board_name, "HW556_C", 7);
-+                      }
-               }
-       }
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -70,6 +70,11 @@ static int bcm63xx_parse_cfe_partitions(
-                             BCM63XX_CFE_BLOCK_SIZE);
-       cfelen = cfe_erasesize;
-+
-+      /* Fix HW556 MX29LV128DB */
-+      if (!strncmp(bcm63xx_nvram_get_name(), "HW556", 5))
-+              cfelen = 0x20000;
-+
-       nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
-       nvramlen = roundup(nvramlen, cfe_erasesize);
-       nvramaddr = master->size - nvramlen;
diff --git a/target/linux/brcm63xx/patches-3.13/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.13/535-board_rta770w.patch
deleted file mode 100644 (file)
index 6e0cd69..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -776,6 +776,60 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+      .name                           = "RTA770W",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "RTA770W:green:usb",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770W:green:adsl",
-+                      .gpio           = 8,
-+              },
-+              {
-+                      .name           = "RTA770W:green:diag",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770W:green:wlan",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 13,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -3788,6 +3842,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-       &board_rta770bw,
-+      &board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.13/536-board_fast2704.patch b/target/linux/brcm63xx/patches-3.13/536-board_fast2704.patch
deleted file mode 100644 (file)
index bb035df..0000000
+++ /dev/null
@@ -1,145 +0,0 @@
-From: Marcin Jurkowski <marcin1j@gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1480,6 +1480,122 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_FAST2704V2 = {
-+      .name                           = "F@ST2704V2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .has_usbd                       = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              /* front LEDs */
-+              {
-+                      .name                   = "F@ST2704V2:green:power",
-+                      .gpio                   = 4,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "F@ST2704V2:red:power",
-+                      .gpio                   = 5,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "F@ST2704V2:red:inet",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "F@ST2704V2:green:dsl",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "F@ST2704V2:green:inet",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "F@ST2704V2:green:usb",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+
-+              /* side button LEDs */
-+              {
-+                      .name                   = "F@ST2704V2:green:wps",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+              },
-+
-+              /* FIXME: can't control gpio0 line in "out" state, needs further investigation */
-+              /*
-+              {
-+                      .name                   = "F@ST2704V2:green:rfkill",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              */
-+
-+      },
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wps",
-+                      .gpio                   = 24,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WPS_BUTTON,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "rfkill",
-+                      .gpio                   = 15,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-@@ -3832,6 +3948,7 @@ static const struct board_info __initcon
-       &board_963281TAN,
-       &board_963281T_TEF,
-       &board_dsl_274xb_f1,
-+      &board_FAST2704V2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.13/537-board_fast2504n.patch b/target/linux/brcm63xx/patches-3.13/537-board_fast2504n.patch
deleted file mode 100644 (file)
index d8b65a5..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-From: Max Staudt <openwrt.max@enpas.org>
-Date: Wed, 15 Jan 2014 18:51:13 +0000
-Subject: [PATCH] brcm63xx: F@ST2504n board support (Linux-3.10.26)
-
-Signed-off-by: Max Staudt <openwrt.max@enpas.org>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -3787,6 +3787,96 @@ static struct board_info __initdata boar
-       .devs = nb6_devices,
-       .num_devs = ARRAY_SIZE(nb6_devices),
- };
-+
-+static struct board_info __initdata board_fast2504n = {
-+      .name                           = "F@ST2504n",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "fast2504n:orange:power",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "fast2504n:green:power",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "fast2504n:red:internet",
-+                      .gpio           = 26,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "fast2504n:green:ok",
-+                      .gpio           = 28,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "fast2504n:orange:ok",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "fast2504n:orange:wlan",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 24,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 25,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -4008,6 +4098,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6362
-       &board_nb6,
-+      &board_fast2504n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.13/550-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.13/550-alice_gate2_leds.patch
deleted file mode 100644 (file)
index 8235396..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2211,6 +2211,99 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "AGPF-S0:red:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:service",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:service",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:adsl",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:adsl",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:wifi",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:wifi",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:internet",
-+                      .gpio           = 25,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:internet",
-+                      .gpio           = 24,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:usr1",
-+                      .gpio           = 27,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:usr1",
-+                      .gpio           = 26,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:usr2",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:usr2",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_DWVS0 = {
diff --git a/target/linux/brcm63xx/patches-3.13/551-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.13/551-96348gw_a_leds.patch
deleted file mode 100644 (file)
index 07fceaa..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1655,6 +1655,19 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "96348GW-A::adsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348GW-A::usb",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              }
-+      },
- };
- static struct board_info __initdata board_96348_D4PW = {
diff --git a/target/linux/brcm63xx/patches-3.13/552-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.13/552-board_96348gw-10_reset_button.patch
deleted file mode 100644 (file)
index 7a31039..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -999,6 +999,17 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_96348gw_11 = {
diff --git a/target/linux/brcm63xx/patches-3.13/553-boards_probe_switch.patch b/target/linux/brcm63xx/patches-3.13/553-boards_probe_switch.patch
deleted file mode 100644 (file)
index 6d3072d..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -627,6 +627,8 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -670,6 +672,8 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -955,6 +959,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1027,6 +1033,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1256,6 +1264,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1431,6 +1441,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1621,6 +1633,12 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -2036,6 +2054,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -2088,6 +2108,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -2229,6 +2251,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -2346,6 +2370,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
diff --git a/target/linux/brcm63xx/patches-3.13/554-board_DWVS0_leds_buttons.patch b/target/linux/brcm63xx/patches-3.13/554-board_DWVS0_leds_buttons.patch
deleted file mode 100644 (file)
index e21274c..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2378,6 +2378,94 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
-       .has_ehci0                      = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "DWV-S0:red:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "DWV-S0:red:internet",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:internet",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:ADSL",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:ADSL",
-+                      .gpio           = 12,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:wifi",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:VoIP",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:VoIP",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:ethernet",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:ethernet",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:USB",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:USB",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.13/555-board_96318ref.patch b/target/linux/brcm63xx/patches-3.13/555-board_96318ref.patch
deleted file mode 100644 (file)
index 5bcfc4c..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -102,6 +102,93 @@ static struct board_info __initdata boar
- #endif
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+      .name                           = "96318REF",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "96318REF:red:post-failed",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96318REF:green:inet",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96318REF:red:inet-fail",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "wps",
-+                      .gpio                   = 33,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WPS_BUTTON,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 34,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+#endif
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -4262,6 +4349,9 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
-       &board_cvg834g,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      &board_96318ref,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_96328A_1241N,
diff --git a/target/linux/brcm63xx/patches-3.13/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-3.13/556-board_96318ref_p300.patch
deleted file mode 100644 (file)
index 4cd8c9b..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -186,6 +186,94 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+      .name                           = "96318REF_P300",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "96318REF_P300:red:post-failed",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96318REF_P300:green:inet",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96318REF_P300:red:inet-fail",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96318REF_P300::usb-pwron",
-+                      .gpio           = 13,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "wps",
-+                      .gpio                   = 33,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WPS_BUTTON,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 34,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -4351,6 +4439,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-+      &board_96318ref_p300,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
diff --git a/target/linux/brcm63xx/patches-3.13/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-3.13/557-board_bcm963269bhr.patch
deleted file mode 100644 (file)
index 1e62d56..0000000
+++ /dev/null
@@ -1,88 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -4431,6 +4431,75 @@ static struct board_info __initdata boar
- #endif
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963269bhr = {
-+      .name                           = "963269BHR",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_pci                        = 1,
-+
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "963629BHR:green:usb1",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963629BHR:green:usb2",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 32,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+#endif
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -4515,6 +4584,9 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963269bhr,
-+#endif
- };
- /*
diff --git a/target/linux/brcm63xx/patches-3.13/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-3.13/558-board_AR1004G.patch
deleted file mode 100644 (file)
index 8b2b1ee..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From: "mexit@o2.pl" <mexit@o2.pl>
-Date: Sun, 24 Nov 2013 21:33:38 +0000
-Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
-
-Support for Asmax AR 1004g router
-
-Signed-off-by: Adrian Feliks <mexit@o2.pl>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2208,6 +2208,51 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+      .name                           = "AR1004G",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "AR1004G:green:inet",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AR1004G:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AR1004G:red:power",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- #endif
- /*
-@@ -4551,6 +4596,7 @@ static const struct board_info __initcon
-       &board_96348A_122,
-       &board_CPVA502plus,
-       &board_96348W3,
-+      &board_96348gw_10_AR1004G,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.13/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-3.13/559-board_vw6339gu.patch
deleted file mode 100644 (file)
index 298a04a..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -4542,6 +4542,108 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_vw6339gu = {
-+      .name                           = "VW6339GU",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN2",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN4",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 7,
-+                              .name   = "WAN",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "VW6339GU:green:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "VW6339GU:red:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "VW6339GU:green:internet",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "VW6339GU:red:internet",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "VW6339GU:green:dsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "VW6339GU:green:wps",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "VW6339GU:green:usb",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 32,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -4632,6 +4734,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963269bhr,
-+      &board_vw6339gu,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.13/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-3.13/560-board_963268gu_p300.patch
deleted file mode 100644 (file)
index afaf983..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -4479,6 +4479,131 @@ static struct board_info __initdata boar
-  * known 63268/63269 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+      .name                           = "963268BU_P300",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 17,
-+                              .name   = "FE1",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "GbE2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0,
-+                              .name   = "GbE3",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "GbE1",
-+                      },
-+
-+                      [6] = {
-+                              .used   = 1,
-+                              .phy_id = 24,
-+                              .name   = "GbE4",
-+                      },
-+
-+                      [7] = {
-+                              .used   = 1,
-+                              .phy_id = 25,
-+                              .name   = "GbE5",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "963268BU_P300:green:power",
-+                      .gpio           = 20,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:red:power",
-+                      .gpio           = 21,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:green:internet",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:red:internet",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:green:adsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:green:wps",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:green:voip1",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:green:voip2",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963268BU_P300:green:pots",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 32,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 33,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_963269bhr = {
-       .name                           = "963269BHR",
-       .expected_cpu_id                = 0x63268,
-@@ -4733,6 +4858,7 @@ static const struct board_info __initcon
-       &board_96368mvngr,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
- #endif
diff --git a/target/linux/brcm63xx/patches-3.13/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.13/800-wl_exports.patch
deleted file mode 100644 (file)
index 0fa42fd..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -40,6 +40,13 @@ struct bcm963xx_nvram {
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-+/*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
-       unsigned int check_len;
-@@ -48,6 +55,7 @@ void __init bcm63xx_nvram_init(void *add
-       /* extract nvram data */
-       memcpy(&nvram, addr, sizeof(nvram));
-+      memcpy(&nvram_buf, addr, NVRAM_SPACE);
-       /* check checksum before using data */
-       if (nvram.version <= 4) {
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -59,6 +59,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/brcm63xx/patches-3.13/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.13/801-ssb_export_fallback_sprom.patch
deleted file mode 100644 (file)
index b3ced8d..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/export.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-@@ -4869,7 +4870,7 @@ static const struct board_info __initcon
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+struct ssb_sprom bcm63xx_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-       .country_code           = 0x0,
-@@ -4889,6 +4890,7 @@ static struct ssb_sprom bcm63xx_sprom =
-       .boardflags_lo          = 0x2848,
-       .boardflags_hi          = 0x0000,
- };
-+EXPORT_SYMBOL(bcm63xx_sprom);
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
diff --git a/target/linux/brcm63xx/patches-3.13/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-3.13/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644 (file)
index 9037d89..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
-+#define RTL8367_PHY_AD_REG                    0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE                       BIT(12)
- #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
-@@ -894,6 +898,7 @@ static int rtl8367_extif_set_mode(struct
-       case RTL8367_EXTIF_MODE_RGMII_33V:
-               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
-               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
-               break;
-       case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
new file mode 100644 (file)
index 0000000..63d385b
--- /dev/null
@@ -0,0 +1,28 @@
+From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:19 +0100
+Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
+
+Knowledge of the clock setup delay should remain at the clock level (so
+it can be clock specific and CPU specific). Add the 100 milliseconds
+required clock delay for the USB host clock when it gets enabled.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++      else
++              return;
++
++      if (enable)
++              msleep(100);
+ }
+ static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
new file mode 100644 (file)
index 0000000..031dab4
--- /dev/null
@@ -0,0 +1,41 @@
+From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:20 +0100
+Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
+ clock code
+
+This patch adds the required 10 micro seconds delay to the USB device
+clock enable operation. Put this where the correct clock knowledege is,
+which is in the clock code, and remove this delay from the bcm63xx_udc
+gadget driver where it was before.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c          |    5 +++++
+ drivers/usb/gadget/bcm63xx_udc.c |    1 -
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++      else
++              return;
++
++      if (enable)
++              udelay(10);
+ }
+ static struct clk clk_usbd = {
+--- a/drivers/usb/gadget/bcm63xx_udc.c
++++ b/drivers/usb/gadget/bcm63xx_udc.c
+@@ -391,7 +391,6 @@ static inline void set_clocks(struct bcm
+       if (is_enabled) {
+               clk_enable(udc->usbh_clk);
+               clk_enable(udc->usbd_clk);
+-              udelay(10);
+       } else {
+               clk_disable(udc->usbd_clk);
+               clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
new file mode 100644 (file)
index 0000000..f98ae5b
--- /dev/null
@@ -0,0 +1,151 @@
+From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:21 +0100
+Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
+ register
+
+This patch moves the code touching the USB private register in the
+bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
+preparation for adding support for OHCI and EHCI host controllers which
+will also touch the USB private register.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
+ drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
+ 4 files changed, 67 insertions(+), 24 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/usb-common.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+-                 dev-wdt.o dev-usb-usbd.o
++                 dev-wdt.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -0,0 +1,53 @@
++/*
++ * Broadcom BCM63xx common USB device configuration code
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
++ * Copyright (C) 2012 Broadcom Corporation
++ *
++ */
++#include <linux/export.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
++{
++      u32 val;
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++      if (is_device) {
++              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      } else {
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      }
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++      if (is_device)
++              val |= USBH_PRIV_SWAP_USBD_MASK;
++      else
++              val &= ~USBH_PRIV_SWAP_USBD_MASK;
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
++
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
++{
++      u32 val;
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++      if (is_on)
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      else
++              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -0,0 +1,9 @@
++#ifndef BCM63XX_USB_PRIV_H_
++#define BCM63XX_USB_PRIV_H_
++
++#include <linux/types.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++
++#endif /* BCM63XX_USB_PRIV_H_ */
+--- a/drivers/usb/gadget/bcm63xx_udc.c
++++ b/drivers/usb/gadget/bcm63xx_udc.c
+@@ -40,6 +40,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
++#include <bcm63xx_usb_priv.h>
+ #define DRV_MODULE_NAME               "bcm63xx_udc"
+@@ -868,22 +869,7 @@ static void bcm63xx_select_phy_mode(stru
+               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+       }
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-      if (is_device) {
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      } else {
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      }
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+-
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+-      if (is_device)
+-              val |= USBH_PRIV_SWAP_USBD_MASK;
+-      else
+-              val &= ~USBH_PRIV_SWAP_USBD_MASK;
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
+ }
+ /**
+@@ -897,14 +883,9 @@ static void bcm63xx_select_phy_mode(stru
+  */
+ static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+ {
+-      u32 val, portmask = BIT(udc->pd->port_no);
++      u32 portmask = BIT(udc->pd->port_no);
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-      if (is_on)
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      else
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++      bcm63xx_usb_priv_select_pullup(portmask, is_on);
+ }
+ /**
diff --git a/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
new file mode 100644 (file)
index 0000000..40bbe08
--- /dev/null
@@ -0,0 +1,169 @@
+From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:22 +0100
+Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
+ common USB code
+
+This patch updates the common USB code touching the USB private
+registers with the specific bits to properly enable OHCI and EHCI
+controllers on BCM63xx SoCs. As a result we now need to protect access
+to Read Modify Write sequences using a spinlock because we cannot
+guarantee that any of the exposed helper will not be called
+concurrently.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
+ 2 files changed, 99 insertions(+)
+
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -5,10 +5,12 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+  * Copyright (C) 2012 Broadcom Corporation
+  *
+  */
++#include <linux/spinlock.h>
+ #include <linux/export.h>
+ #include <bcm63xx_cpu.h>
+@@ -16,9 +18,14 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_usb_priv.h>
++static DEFINE_SPINLOCK(usb_priv_reg_lock);
++
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
+ {
+       u32 val;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
+       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+       if (is_device) {
+@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
+       else
+               val &= ~USBH_PRIV_SWAP_USBD_MASK;
+       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
+ {
+       u32 val;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
+       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+       if (is_on)
+@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
+       else
+               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
++
++/* The following array represents the meaning of the DESC/DATA
++ * endian swapping with respect to the CPU configured endianness
++ *
++ * DATA       ENDN    mmio    descriptor
++ * 0  0       BE      invalid
++ * 0  1       BE      LE
++ * 1  0       BE      BE
++ * 1  1       BE      invalid
++ *
++ * Since BCM63XX SoCs are configured to be in big-endian mode
++ * we want configuration at line 3.
++ */
++void bcm63xx_usb_priv_ohci_cfg_set(void)
++{
++      u32 reg;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++      if (BCMCPU_IS_6348())
++              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++      else if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++                              USBH_PRIV_TEST_6358_REG);
++
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      }
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
++
++void bcm63xx_usb_priv_ehci_cfg_set(void)
++{
++      u32 reg;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++      if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++                              USBH_PRIV_TEST_6358_REG);
++
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      }
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -5,5 +5,7 @@
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++void bcm63xx_usb_priv_ohci_cfg_set(void);
++void bcm63xx_usb_priv_ehci_cfg_set(void);
+ #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
new file mode 100644 (file)
index 0000000..768dcca
--- /dev/null
@@ -0,0 +1,62 @@
+From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:23 +0100
+Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+OHCI controller, and ensures that all relevant OHCI-related
+configuration options are correctly selected. So far, OHCI support is
+available for the 6328, 6348, 6358 and 6358 SoCs.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++config BCM63XX_OHCI
++      bool
++      select USB_ARCH_HAS_OHCI
++      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
++      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
+       bool "support 6348 CPU"
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
new file mode 100644 (file)
index 0000000..111d481
--- /dev/null
@@ -0,0 +1,138 @@
+From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:24 +0100
+Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
+driven by the ohci-platform generic driver by using specific power
+on/off/suspend callback to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
+ 3 files changed, 101 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+-                 dev-wdt.o dev-usb-usbd.o usb-common.o
++                 dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,94 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ohci_pdriver.h>
++#include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ohci_power_on(struct platform_device *pdev)
++{
++      usb_host_clock = clk_get(&pdev->dev, "usbh");
++      if (IS_ERR_OR_NULL(usb_host_clock))
++              return -ENODEV;
++
++      clk_prepare_enable(usb_host_clock);
++
++      bcm63xx_usb_priv_ohci_cfg_set();
++
++      return 0;
++}
++
++static void bcm63xx_ohci_power_off(struct platform_device *pdev)
++{
++      if (!IS_ERR_OR_NULL(usb_host_clock)) {
++              clk_disable_unprepare(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++}
++
++static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
++      .big_endian_desc        = 1,
++      .big_endian_mmio        = 1,
++      .no_big_frame_no        = 1,
++      .num_ports              = 1,
++      .power_on               = bcm63xx_ohci_power_on,
++      .power_off              = bcm63xx_ohci_power_off,
++      .power_suspend          = bcm63xx_ohci_power_off,
++};
++
++static struct platform_device bcm63xx_ohci_device = {
++      .name           = "ohci-platform",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(ohci_resources),
++      .resource       = ohci_resources,
++      .dev            = {
++              .platform_data          = &bcm63xx_ohci_pdata,
++              .dma_mask               = &ohci_dmamask,
++              .coherent_dma_mask      = DMA_BIT_MASK(32),
++      },
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
++              return -ENODEV;
++
++      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++      ohci_resources[0].end = ohci_resources[0].start;
++      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++
++      return platform_device_register(&bcm63xx_ohci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
new file mode 100644 (file)
index 0000000..2c26482
--- /dev/null
@@ -0,0 +1,36 @@
+From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:25 +0100
+Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
+ enables it
+
+BCM63XX-based boards can control the registration of the OHCI controller
+by setting their has_ohci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to
+register the OHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -26,6 +26,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -898,6 +899,9 @@ int __init board_register_devices(void)
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
+       if (board.has_dsp)
+               bcm63xx_dsp_register(&board.dsp);
diff --git a/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
new file mode 100644 (file)
index 0000000..bce91e3
--- /dev/null
@@ -0,0 +1,62 @@
+From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:26 +0100
+Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+EHCI controller, and ensures that all relevant EHCI-related
+configuration options are selected. So far BCM6328, BCM6358 and BCM6368
+have an EHCI controller and do select this symbol. Update
+drivers/usb/host/Kconfig with BCM63XX to update direct unmet
+dependencies.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |    9 +++++++++
+ drivers/usb/host/Kconfig  |    5 +++--
+ 2 files changed, 12 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -12,11 +12,18 @@ config BCM63XX_OHCI
+       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
+       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++config BCM63XX_EHCI
++      bool
++      select USB_ARCH_HAS_EHCI
++      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
++      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
new file mode 100644 (file)
index 0000000..8b1f8d2
--- /dev/null
@@ -0,0 +1,137 @@
+From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:27 +0100
+Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
+driven by the generic ehci-platform driver by using specific power
+on/off/suspend callbacks to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
+ 3 files changed, 99 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,8 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+-                 dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
++                 dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
++                 usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,92 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/usb/ehci_pdriver.h>
++#include <linux/dma-mapping.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ehci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ehci_power_on(struct platform_device *pdev)
++{
++      usb_host_clock = clk_get(&pdev->dev, "usbh");
++      if (IS_ERR_OR_NULL(usb_host_clock))
++              return -ENODEV;
++
++      clk_prepare_enable(usb_host_clock);
++
++      bcm63xx_usb_priv_ehci_cfg_set();
++
++      return 0;
++}
++
++static void bcm63xx_ehci_power_off(struct platform_device *pdev)
++{
++      if (!IS_ERR_OR_NULL(usb_host_clock)) {
++              clk_disable_unprepare(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++}
++
++static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
++      .big_endian_desc        = 1,
++      .big_endian_mmio        = 1,
++      .power_on               = bcm63xx_ehci_power_on,
++      .power_off              = bcm63xx_ehci_power_off,
++      .power_suspend          = bcm63xx_ehci_power_off,
++};
++
++static struct platform_device bcm63xx_ehci_device = {
++      .name           = "ehci-platform",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(ehci_resources),
++      .resource       = ehci_resources,
++      .dev            = {
++              .platform_data          = &bcm63xx_ehci_pdata,
++              .dma_mask               = &ehci_dmamask,
++              .coherent_dma_mask      = DMA_BIT_MASK(32),
++      },
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++              return 0;
++
++      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++      ehci_resources[0].end = ehci_resources[0].start;
++      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++
++      return platform_device_register(&bcm63xx_ehci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
new file mode 100644 (file)
index 0000000..641a57c
--- /dev/null
@@ -0,0 +1,36 @@
+From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:28 +0100
+Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
+ enables it
+
+BCM63XX-based board can control the registration of the EHCI controller
+by setting their has_ehci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to register
+the EHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -26,6 +26,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -899,6 +900,9 @@ int __init board_register_devices(void)
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
+       if (board.has_ohci0)
+               bcm63xx_ohci_register();
diff --git a/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
new file mode 100644 (file)
index 0000000..6d91129
--- /dev/null
@@ -0,0 +1,24 @@
+From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:30 +0100
+Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
+ overcurrent
+
+This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
+does not support proper overcurrent reporting.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
+ static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
++      .ignore_oc              = 1,
+       .power_on               = bcm63xx_ehci_power_on,
+       .power_off              = bcm63xx_ehci_power_off,
+       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
new file mode 100644 (file)
index 0000000..00dc9c9
--- /dev/null
@@ -0,0 +1,38 @@
+From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 1 Jul 2011 23:16:47 +0200
+Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ include/linux/spi/flash.h |    5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -2,7 +2,7 @@
+ #define LINUX_SPI_FLASH_H
+ struct mtd_partition;
+-
++struct mtd_part_parser_data;
+ /**
+  * struct flash_platform_data: board-specific flash data
+  * @name: optional flash device name (eg, as used with mtdparts=)
+@@ -10,6 +10,8 @@ struct mtd_partition;
+  * @nr_parts: number of mtd_partitions for static partitoning
+  * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
+  *    with chips that can't be queried for JEDEC or other IDs
++ * @part_probe_types: optional list of MTD parser names to use for
++ *    partitioning
+  *
+  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
+  * provide information about SPI flash parts (such as DataFlash) to
+@@ -25,6 +27,7 @@ struct flash_platform_data {
+       char            *type;
++      const char      **part_probe_types;
+       /* we'll likely add more ... use JEDEC IDs, etc */
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
new file mode 100644 (file)
index 0000000..ad82320
--- /dev/null
@@ -0,0 +1,23 @@
+From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 10 Nov 2011 16:53:08 +0100
+Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
+ platform data
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/devices/m25p80.c |    3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1313,7 +1313,8 @@ static int m25p_probe(struct spi_device
+       /* partitions should match sector boundaries; and it may be good to
+        * use readonly partitions for writeprotected sectors (BP2..BP0).
+        */
+-      return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++      return mtd_device_parse_register(&flash->mtd,
++                      data ? data->part_probe_types : NULL, &ppdata,
+                       data ? data->parts : NULL,
+                       data ? data->nr_parts : 0);
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
new file mode 100644 (file)
index 0000000..4e8a7a3
--- /dev/null
@@ -0,0 +1,92 @@
+From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 10 Nov 2011 17:33:40 +0100
+Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
+ include/linux/spi/flash.h    |    4 ++++
+ 2 files changed, 31 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -115,6 +115,7 @@ struct m25p {
+       u8                      program_opcode;
+       u8                      *command;
+       enum read_type          flash_read;
++      int                     max_transfer_len;
+ };
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -509,10 +510,9 @@ static inline unsigned int m25p80_rx_nbi
+  * Read an address range from the flash chip.  The address range
+  * may be any size provided it is within the physical boundaries.
+  */
+-static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
++static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
+       size_t *retlen, u_char *buf)
+ {
+-      struct m25p *flash = mtd_to_m25p(mtd);
+       struct spi_transfer t[2];
+       struct spi_message m;
+       uint8_t opcode;
+@@ -562,6 +562,28 @@ static int m25p80_read(struct mtd_info *
+       return 0;
+ }
++static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
++      size_t *retlen, u_char *buf)
++{
++      struct m25p *flash = mtd_to_m25p(mtd);
++      size_t off;
++      size_t read_len = flash->max_transfer_len;
++      size_t part_len;
++      int ret = 0;
++
++      if (!read_len)
++              return __m25p80_read(flash, from, len, retlen, buf);
++
++      *retlen = 0;
++
++      for (off = 0; off < len && !ret; off += read_len) {
++              ret = __m25p80_read(flash, from + off, min(len - off, read_len),
++                                  &part_len, buf + off);
++                      *retlen += part_len;
++      }
++
++      return ret;
++}
+ /*
+  * Write an address range to the flash chip.  Data must be written in
+  * FLASH_PAGESIZE chunks.  The address range may be any size provided
+@@ -1158,6 +1180,9 @@ static int m25p_probe(struct spi_device
+       if (!flash->command)
+               return -ENOMEM;
++      if (data)
++              flash->max_transfer_len = data->max_transfer_len;
++
+       flash->spi = spi;
+       mutex_init(&flash->lock);
+       spi_set_drvdata(spi, flash);
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
+  * @part_probe_types: optional list of MTD parser names to use for
+  *    partitioning
+  *
++ * @max_transfer_len: option maximum read/write length limitation for
++ *    SPI controllers not able to transfer any length commands.
+  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
+  * provide information about SPI flash parts (such as DataFlash) to
+  * help set up the device and its appropriate default partitioning.
+@@ -28,6 +30,8 @@ struct flash_platform_data {
+       char            *type;
+       const char      **part_probe_types;
++
++      unsigned int    max_transfer_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch b/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
new file mode 100644 (file)
index 0000000..3ca0c8e
--- /dev/null
@@ -0,0 +1,31 @@
+From b2f399dcd674a692a64bb3b300b77b78ae57b530 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 12 Jan 2014 16:47:35 +0100
+Subject: [PATCH] USB: OHCI: allow other arches to use the BE frame number
+ quirk
+
+Intead of guarding it with a certain PPC SoC and expanding the list
+for each SoC requiring it, just guard it with USB_OHCI_BIG_ENDIAN_DESC.
+
+This makes it less suprising that passing no_big_frame_no = 1 for the
+platform data does not do what expected (or
+
+Checking it for all big endian descriptor setups should not impact
+performance much as USB1.1 is rather slow anyway.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ohci.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -639,7 +639,7 @@ static inline u32 hc32_to_cpup (const st
+  * some big-endian SOC implementations.  Same thing happens with PSW access.
+  */
+-#ifdef CONFIG_PPC_MPC52xx
++#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+ #define big_endian_frame_no_quirk(ohci)       (ohci->flags & OHCI_QUIRK_FRAME_NO)
+ #else
+ #define big_endian_frame_no_quirk(ohci)       0
diff --git a/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
new file mode 100644 (file)
index 0000000..474171f
--- /dev/null
@@ -0,0 +1,65 @@
+From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 19 Jan 2014 12:18:03 +0100
+Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
+
+In the same way as the ohci platform driver allows limiting ports,
+enable the same for ehci. This prevents a mismatch in the available
+ports between ehci/ohci on USB 2.0 controllers.
+
+This is needed if the USB host controller always reports the maximum
+number of ports regardless of the number of available ports (because
+one might be set to be usb device).
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      | 4 ++++
+ drivers/usb/host/ehci-platform.c | 2 ++
+ drivers/usb/host/ehci.h          | 1 +
+ include/linux/usb/ehci_pdriver.h | 1 +
+ 4 files changed, 8 insertions(+)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -660,6 +660,10 @@ int ehci_setup(struct usb_hcd *hcd)
+       /* cache this readonly data; minimize chip reads */
+       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++      if (ehci->num_ports) {
++              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
++              ehci->hcs_params |= ehci->num_ports;
++      }
+       ehci->sbrn = HCD_USB2;
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -48,6 +48,8 @@ static int ehci_platform_reset(struct us
+       ehci->big_endian_desc = pdata->big_endian_desc;
+       ehci->big_endian_mmio = pdata->big_endian_mmio;
+       ehci->ignore_oc = pdata->ignore_oc;
++      if (pdata->num_ports && pdata->num_ports <= 15)
++              ehci->num_ports = pdata->num_ports;
+       if (pdata->pre_setup) {
+               retval = pdata->pre_setup(hcd);
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -213,6 +213,7 @@ struct ehci_hcd {                  /* one per controlle
+       u32                     command;
+       /* SILICON QUIRKS */
++      unsigned int            num_ports;
+       unsigned                no_selective_suspend:1;
+       unsigned                has_fsl_port_bug:1; /* FreeScale */
+       unsigned                big_endian_mmio:1;
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -40,6 +40,7 @@ struct usb_hcd;
+  */
+ struct usb_ehci_pdata {
+       int             caps_offset;
++      unsigned int    num_ports;
+       unsigned        has_tt:1;
+       unsigned        has_synopsys_hc_bug:1;
+       unsigned        big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch b/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch
new file mode 100644 (file)
index 0000000..0886f6c
--- /dev/null
@@ -0,0 +1,116 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,6 +12,8 @@
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -37,6 +39,9 @@
+ #define HCS_OFFSET_128K                       0x20000
++#define BCM963XX_KEYS_POLL_INTERVAL   20
++#define BCM963XX_KEYS_DEBOUNCE_INTERVAL       (BCM963XX_KEYS_POLL_INTERVAL * 3)
++
+ static struct board_info board;
+ /*
+@@ -380,6 +385,16 @@ static struct board_info __initdata boar
+                       .active_low     = 1,
+               },
+       },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
+ };
+ static struct board_info __initdata board_96348gw = {
+@@ -438,6 +453,16 @@ static struct board_info __initdata boar
+                       .active_low     = 1,
+               },
+       },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
+ };
+ static struct board_info __initdata board_FAST2404 = {
+@@ -871,11 +896,23 @@ static struct platform_device bcm63xx_gp
+       .dev.platform_data      = &bcm63xx_led_data,
+ };
++static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
++      .poll_interval  = BCM963XX_KEYS_POLL_INTERVAL,
++};
++
++static struct platform_device bcm63xx_gpio_keys_device = {
++      .name           = "gpio-keys-polled",
++      .id             = 0,
++      .dev.platform_data = &bcm63xx_gpio_keys_data,
++};
++
+ /*
+  * third stage init callback, register all board devices.
+  */
+ int __init board_register_devices(void)
+ {
++      int button_count = 0;
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -937,5 +974,16 @@ int __init board_register_devices(void)
+               gpio_request_one(board.ephy_reset_gpio,
+                               board.ephy_reset_gpio_flags, "ephy-reset");
++      /* count number of BUTTONs defined by this device */
++      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++              button_count++;
++
++      if (button_count) {
++              bcm63xx_gpio_keys_data.nbuttons = button_count;
++              bcm63xx_gpio_keys_data.buttons = board.buttons;
++
++              platform_device_register(&bcm63xx_gpio_keys_device);
++      }
++
+       return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -3,6 +3,7 @@
+ #include <linux/types.h>
+ #include <linux/gpio.h>
++#include <linux/gpio_keys.h>
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -48,6 +49,9 @@ struct board_info {
+       /* GPIO LEDs */
+       struct gpio_led leds[5];
++      /* Buttons */
++      struct gpio_keys_button buttons[4];
++
+       /* External PHY reset GPIO */
+       unsigned int ephy_reset_gpio;
diff --git a/target/linux/brcm63xx/patches-3.14/301-led_count.patch b/target/linux/brcm63xx/patches-3.14/301-led_count.patch
new file mode 100644 (file)
index 0000000..5b9a12e
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -912,6 +912,7 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+       int button_count = 0;
++      int led_count = 0;
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -965,10 +966,16 @@ int __init board_register_devices(void)
+       bcm63xx_flash_register();
+-      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+-      bcm63xx_led_data.leds = board.leds;
++      /* count number of LEDs defined by this device */
++      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++              led_count++;
++
++      if (led_count) {
++              bcm63xx_led_data.num_leds = led_count;
++              bcm63xx_led_data.leds = board.leds;
+-      platform_device_register(&bcm63xx_gpio_leds);
++              platform_device_register(&bcm63xx_gpio_leds);
++      }
+       if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+               gpio_request_one(board.ephy_reset_gpio,
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -47,7 +47,7 @@ struct board_info {
+       struct bcm63xx_dsp_platform_data dsp;
+       /* GPIO LEDs */
+-      struct gpio_led leds[5];
++      struct gpio_led leds[14];
+       /* Buttons */
+       struct gpio_keys_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch
new file mode 100644 (file)
index 0000000..2810b6f
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -964,6 +964,9 @@ int __init board_register_devices(void)
+       bcm63xx_hsspi_register();
++      if (board.num_devs)
++              platform_add_devices(board.devs, board.num_devs);
++
+       bcm63xx_flash_register();
+       /* count number of LEDs defined by this device */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -57,6 +57,10 @@ struct board_info {
+       /* External PHY reset GPIO flags from gpio.h */
+       unsigned long ephy_reset_gpio_flags;
++
++      /* Additional platform devices */
++      struct platform_device **devs;
++      unsigned int    num_devs;
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch b/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch
new file mode 100644 (file)
index 0000000..0258710
--- /dev/null
@@ -0,0 +1,33 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -14,6 +14,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/spi/spi.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -967,6 +968,9 @@ int __init board_register_devices(void)
+       if (board.num_devs)
+               platform_add_devices(board.devs, board.num_devs);
++      if (board.num_spis)
++              spi_register_board_info(board.spis, board.num_spis);
++
+       bcm63xx_flash_register();
+       /* count number of LEDs defined by this device */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -61,6 +61,10 @@ struct board_info {
+       /* Additional platform devices */
+       struct platform_device **devs;
+       unsigned int    num_devs;
++
++      /* Additional platform devices */
++      struct spi_board_info *spis;
++      unsigned int    num_spis;
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch
new file mode 100644 (file)
index 0000000..937b9d6
--- /dev/null
@@ -0,0 +1,62 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -35,6 +35,7 @@
+ #include <board_bcm963xx.h>
+ #include <uapi/linux/bcm933xx_hcs.h>
++#include <uapi/linux/bcm963xx_tag.h>
+ #define PFX   "board_bcm963xx: "
+@@ -43,6 +44,9 @@
+ #define BCM963XX_KEYS_POLL_INTERVAL   20
+ #define BCM963XX_KEYS_DEBOUNCE_INTERVAL       (BCM963XX_KEYS_POLL_INTERVAL * 3)
++#define CFE_OFFSET_64K                        0x10000
++#define CFE_OFFSET_128K                       0x20000
++
+ static struct board_info board;
+ /*
+@@ -782,6 +786,30 @@ const char *board_get_name(void)
+       return board.name;
+ }
++static void __init boardid_fixup(u8 *boot_addr)
++{
++      struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
++      char *board_name = (char *)bcm63xx_nvram_get_name();
++
++      /* check if bcm_tag is at 64k offset */
++      if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
++              /* else try 128k */
++              tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
++              if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
++                      /* No tag found */
++                      printk(KERN_DEBUG "No bcm_tag found!\n");
++                      return;
++              }
++      }
++      /* check if we should override the boardid */
++      if (tag->information1[0] != '+')
++              return;
++
++      strncpy(board_name, &tag->information1[1], BOARDID_LEN);
++
++      printk(KERN_INFO "Overriding boardid with '%s'\n", board_name);
++}
++
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+@@ -820,6 +848,10 @@ void __init board_prom_init(void)
+               hcs = (struct bcm_hcs *)boot_addr;
+               board_name = hcs->filename;
+       } else {
++              if (strcmp(cfe_version, "unknown") != 0) {
++                      /* cfe present */
++                      boardid_fixup(boot_addr);
++              }
+               board_name = bcm63xx_nvram_get_name();
+       }
+       /* find board by name */
diff --git a/target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch b/target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch
new file mode 100644 (file)
index 0000000..0064066
--- /dev/null
@@ -0,0 +1,267 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -148,28 +148,28 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl",
++                      .name           = "96338GW:green:adsl",
+                       .gpio           = 3,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ses",
++                      .name           = "96338GW:green:ses",
+                       .gpio           = 5,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96338GW:green:ppp-fail",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96338GW:green:power",
+                       .gpio           = 0,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96338GW:green:stop",
+                       .gpio           = 1,
+                       .active_low     = 1,
+               }
+@@ -189,28 +189,28 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl",
++                      .name           = "96338W:green:adsl",
+                       .gpio           = 3,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ses",
++                      .name           = "96338W:green:ses",
+                       .gpio           = 5,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96338W:green:ppp-fail",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96338W:green:power",
+                       .gpio           = 0,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96338W:green:stop",
+                       .gpio           = 1,
+                       .active_low     = 1,
+               },
+@@ -249,29 +249,29 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl-fail",
++                      .name           = "96348R:green:adsl-fail",
+                       .gpio           = 2,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp",
++                      .name           = "96348R:green:ppp",
+                       .gpio           = 3,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96348R:green:ppp-fail",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96348R:green:power",
+                       .gpio           = 0,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96348R:green:stop",
+                       .gpio           = 1,
+                       .active_low     = 1,
+               },
+@@ -310,28 +310,28 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl-fail",
++                      .name           = "96348GW-10:green:adsl-fail",
+                       .gpio           = 2,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp",
++                      .name           = "96348GW-10:green:ppp",
+                       .gpio           = 3,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96348GW-10:green:ppp-fail",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96348GW-10:green:power",
+                       .gpio           = 0,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96348GW-10:green:stop",
+                       .gpio           = 1,
+                       .active_low     = 1,
+               },
+@@ -364,28 +364,28 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl-fail",
++                      .name           = "96348GW-11:green:adsl-fail",
+                       .gpio           = 2,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp",
++                      .name           = "96348GW-11:green:ppp",
+                       .gpio           = 3,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96348GW-11:green:ppp-fail",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96348GW-11:green:power",
+                       .gpio           = 0,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96348GW-11:green:stop",
+                       .gpio           = 1,
+                       .active_low     = 1,
+               },
+@@ -432,28 +432,28 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl-fail",
++                      .name           = "96348GW:green:adsl-fail",
+                       .gpio           = 2,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp",
++                      .name           = "96348GW:green:ppp",
+                       .gpio           = 3,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96348GW:green:ppp-fail",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96348GW:green:power",
+                       .gpio           = 0,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96348GW:green:stop",
+                       .gpio           = 1,
+                       .active_low     = 1,
+               },
+@@ -585,27 +585,27 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl-fail",
++                      .name           = "96358VW:green:adsl-fail",
+                       .gpio           = 15,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp",
++                      .name           = "96358VW:green:ppp",
+                       .gpio           = 22,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96358VW:green:ppp-fail",
+                       .gpio           = 23,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96358VW:green:power",
+                       .gpio           = 4,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96358VW:green:stop",
+                       .gpio           = 5,
+               },
+       },
+@@ -637,22 +637,22 @@ static struct board_info __initdata boar
+       .leds = {
+               {
+-                      .name           = "adsl",
++                      .name           = "96358VW2:green:adsl",
+                       .gpio           = 22,
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "ppp-fail",
++                      .name           = "96358VW2:green:ppp-fail",
+                       .gpio           = 23,
+               },
+               {
+-                      .name           = "power",
++                      .name           = "96358VW2:green:power",
+                       .gpio           = 5,
+                       .active_low     = 1,
+                       .default_trigger = "default-on",
+               },
+               {
+-                      .name           = "stop",
++                      .name           = "96358VW2:green:stop",
+                       .gpio           = 4,
+                       .active_low     = 1,
+               },
diff --git a/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch
new file mode 100644 (file)
index 0000000..dfc3384
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -835,10 +835,20 @@ void __init board_prom_init(void)
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+-      if (!memcmp(cfe, "cfe-v", 5))
+-              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+-                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+-      else
++      if (strstarts(cfe, "cfe-")) {
++              if(cfe[4] == 'v') {
++                      if(cfe[5] == 'd')
++                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
++                      else if (cfe[10] > 0)
++                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
++                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
++                      else
++                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
++                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++              } else {
++                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
++              }
++      } else
+               strcpy(cfe_version, "unknown");
+       printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
diff --git a/target/linux/brcm63xx/patches-3.14/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch b/target/linux/brcm63xx/patches-3.14/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
new file mode 100644 (file)
index 0000000..04b3426
--- /dev/null
@@ -0,0 +1,61 @@
+From 082a49f0490008b999db80e3ccf1521c7dd21cec Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 2 Dec 2013 12:32:44 +0100
+Subject: [PATCH 1/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from register
+ sets
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 33 ------------------------
+ 1 file changed, 33 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -598,10 +598,6 @@ enum bcm63xx_regs_set {
+ extern const unsigned long *bcm63xx_regs_base;
+-#define __GEN_RSET_BASE(__cpu, __rset)                                        \
+-      case RSET_## __rset :                                           \
+-              return BCM_## __cpu ##_## __rset ##_BASE;
+-
+ #define __GEN_RSET(__cpu)                                             \
+       switch (set) {                                                  \
+       __GEN_RSET_BASE(__cpu, DSL_LMEM)                                \
+@@ -693,36 +689,7 @@ extern const unsigned long *bcm63xx_regs
+ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+ {
+-#ifdef BCMCPU_RUNTIME_DETECT
+       return bcm63xx_regs_base[set];
+-#else
+-#ifdef CONFIG_BCM63XX_CPU_3368
+-      __GEN_RSET(3368)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6328
+-      __GEN_RSET(6328)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6338
+-      __GEN_RSET(6338)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-      __GEN_RSET(6345)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6348
+-      __GEN_RSET(6348)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6358
+-      __GEN_RSET(6358)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6362
+-      __GEN_RSET(6362)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6368
+-      __GEN_RSET(6368)
+-#endif
+-#endif
+-      /* unreached */
+-      return 0;
+ }
+ /*
diff --git a/target/linux/brcm63xx/patches-3.14/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch b/target/linux/brcm63xx/patches-3.14/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
new file mode 100644 (file)
index 0000000..9226530
--- /dev/null
@@ -0,0 +1,135 @@
+From 07d0224576cbb2e6ac680b4ade4bba7a49bd0a07 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 2 Dec 2013 12:34:11 +0100
+Subject: [PATCH 2/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from irq setup code
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 109 ------------------------------------------------
+ 1 file changed, 109 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -26,114 +26,6 @@ static void __internal_irq_mask_64(unsig
+ static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
+ static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
+-#ifndef BCMCPU_RUNTIME_DETECT
+-#ifdef CONFIG_BCM63XX_CPU_3368
+-#define irq_stat_reg          PERF_IRQSTAT_3368_REG
+-#define irq_mask_reg          PERF_IRQMASK_3368_REG
+-#define irq_bits              32
+-#define is_ext_irq_cascaded   0
+-#define ext_irq_start         0
+-#define ext_irq_end           0
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_3368
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6328
+-#define irq_stat_reg          PERF_IRQSTAT_6328_REG
+-#define irq_mask_reg          PERF_IRQMASK_6328_REG
+-#define irq_bits              64
+-#define is_ext_irq_cascaded   1
+-#define ext_irq_start         (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end           (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6328
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6338
+-#define irq_stat_reg          PERF_IRQSTAT_6338_REG
+-#define irq_mask_reg          PERF_IRQMASK_6338_REG
+-#define irq_bits              32
+-#define is_ext_irq_cascaded   0
+-#define ext_irq_start         0
+-#define ext_irq_end           0
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6338
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-#define irq_stat_reg          PERF_IRQSTAT_6345_REG
+-#define irq_mask_reg          PERF_IRQMASK_6345_REG
+-#define irq_bits              32
+-#define is_ext_irq_cascaded   0
+-#define ext_irq_start         0
+-#define ext_irq_end           0
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6345
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6348
+-#define irq_stat_reg          PERF_IRQSTAT_6348_REG
+-#define irq_mask_reg          PERF_IRQMASK_6348_REG
+-#define irq_bits              32
+-#define is_ext_irq_cascaded   0
+-#define ext_irq_start         0
+-#define ext_irq_end           0
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6348
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6358
+-#define irq_stat_reg          PERF_IRQSTAT_6358_REG
+-#define irq_mask_reg          PERF_IRQMASK_6358_REG
+-#define irq_bits              32
+-#define is_ext_irq_cascaded   1
+-#define ext_irq_start         (BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end           (BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6358
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6362
+-#define irq_stat_reg          PERF_IRQSTAT_6362_REG
+-#define irq_mask_reg          PERF_IRQMASK_6362_REG
+-#define irq_bits              64
+-#define is_ext_irq_cascaded   1
+-#define ext_irq_start         (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end           (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count         4
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6362
+-#define ext_irq_cfg_reg2      0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6368
+-#define irq_stat_reg          PERF_IRQSTAT_6368_REG
+-#define irq_mask_reg          PERF_IRQMASK_6368_REG
+-#define irq_bits              64
+-#define is_ext_irq_cascaded   1
+-#define ext_irq_start         (BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end           (BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count         6
+-#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6368
+-#define ext_irq_cfg_reg2      PERF_EXTIRQ_CFG_REG2_6368
+-#endif
+-
+-#if irq_bits == 32
+-#define dispatch_internal                     __dispatch_internal
+-#define internal_irq_mask                     __internal_irq_mask_32
+-#define internal_irq_unmask                   __internal_irq_unmask_32
+-#else
+-#define dispatch_internal                     __dispatch_internal_64
+-#define internal_irq_mask                     __internal_irq_mask_64
+-#define internal_irq_unmask                   __internal_irq_unmask_64
+-#endif
+-
+-#define irq_stat_addr (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
+-#define irq_mask_addr (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
+-
+-static inline void bcm63xx_init_irq(void)
+-{
+-}
+-#else /* ! BCMCPU_RUNTIME_DETECT */
+-
+ static u32 irq_stat_addr, irq_mask_addr;
+ static void (*dispatch_internal)(void);
+ static int is_ext_irq_cascaded;
+@@ -234,7 +126,6 @@ static void bcm63xx_init_irq(void)
+               internal_irq_unmask = __internal_irq_unmask_64;
+       }
+ }
+-#endif /* ! BCMCPU_RUNTIME_DETECT */
+ static inline u32 get_ext_irq_perf_reg(int irq)
+ {
diff --git a/target/linux/brcm63xx/patches-3.14/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch b/target/linux/brcm63xx/patches-3.14/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
new file mode 100644 (file)
index 0000000..f26624e
--- /dev/null
@@ -0,0 +1,85 @@
+From 72578a46543821c5b9544842e45fcbed0c1b7eb8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:35:12 +0100
+Subject: [PATCH 3/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from reset code
+
+---
+ arch/mips/bcm63xx/reset.c | 60 -----------------------------------------------
+ 1 file changed, 60 deletions(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -125,8 +125,6 @@
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
+-#ifdef BCMCPU_RUNTIME_DETECT
+-
+ /*
+  * core reset bits
+  */
+@@ -188,64 +186,6 @@ static int __init bcm63xx_reset_bits_ini
+       return 0;
+ }
+-#else
+-
+-#ifdef CONFIG_BCM63XX_CPU_3368
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(3368)
+-};
+-#define reset_reg PERF_SOFTRESET_6358_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6328
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(6328)
+-};
+-#define reset_reg PERF_SOFTRESET_6328_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6338
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(6338)
+-};
+-#define reset_reg PERF_SOFTRESET_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-static const u32 bcm63xx_reset_bits[] = { };
+-#define reset_reg 0
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6348
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(6348)
+-};
+-#define reset_reg PERF_SOFTRESET_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6358
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(6358)
+-};
+-#define reset_reg PERF_SOFTRESET_6358_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6362
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(6362)
+-};
+-#define reset_reg PERF_SOFTRESET_6362_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6368
+-static const u32 bcm63xx_reset_bits[] = {
+-      __GEN_RESET_BITS_TABLE(6368)
+-};
+-#define reset_reg PERF_SOFTRESET_6368_REG
+-#endif
+-
+-static int __init bcm63xx_reset_bits_init(void) { return 0; }
+-#endif
+ static DEFINE_SPINLOCK(reset_mutex);
diff --git a/target/linux/brcm63xx/patches-3.14/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch b/target/linux/brcm63xx/patches-3.14/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
new file mode 100644 (file)
index 0000000..49a3475
--- /dev/null
@@ -0,0 +1,39 @@
+From 1aab93c5c97c55fef130726a6f58c9a1fd5b6240 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:36:45 +0100
+Subject: [PATCH 4/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from gpio
+
+---
+ arch/mips/bcm63xx/gpio.c | 14 --------------
+ 1 file changed, 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -18,19 +18,6 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+-#ifndef BCMCPU_RUNTIME_DETECT
+-#define gpio_out_low_reg      GPIO_DATA_LO_REG
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-#ifdef gpio_out_low_reg
+-#undef gpio_out_low_reg
+-#define gpio_out_low_reg      GPIO_DATA_LO_REG_6345
+-#endif /* gpio_out_low_reg */
+-#endif /* CONFIG_BCM63XX_CPU_6345 */
+-
+-static inline void bcm63xx_gpio_out_low_reg_init(void)
+-{
+-}
+-#else /* ! BCMCPU_RUNTIME_DETECT */
+ static u32 gpio_out_low_reg;
+ static void bcm63xx_gpio_out_low_reg_init(void)
+@@ -44,7 +31,6 @@ static void bcm63xx_gpio_out_low_reg_ini
+               break;
+       }
+ }
+-#endif /* ! BCMCPU_RUNTIME_DETECT */
+ static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+ static u32 gpio_out_low, gpio_out_high;
diff --git a/target/linux/brcm63xx/patches-3.14/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch b/target/linux/brcm63xx/patches-3.14/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
new file mode 100644 (file)
index 0000000..afde39b
--- /dev/null
@@ -0,0 +1,80 @@
+From 94f819bc230bb61a9ff21da6c860a40ca68c2805 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:43:35 +0100
+Subject: [PATCH 5/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from spi code
+
+---
+ arch/mips/bcm63xx/dev-spi.c                        |  4 ---
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h     | 31 ----------------------
+ 2 files changed, 35 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -18,7 +18,6 @@
+ #include <bcm63xx_dev_spi.h>
+ #include <bcm63xx_regs.h>
+-#ifdef BCMCPU_RUNTIME_DETECT
+ /*
+  * register offsets
+  */
+@@ -41,9 +40,6 @@ static __init void bcm63xx_spi_regs_init
+               BCMCPU_IS_6362() || BCMCPU_IS_6368())
+               bcm63xx_regs_spi = bcm6358_regs_spi;
+ }
+-#else
+-static __init void bcm63xx_spi_regs_init(void) { }
+-#endif
+ static struct resource spi_resources[] = {
+       {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -30,26 +30,6 @@ enum bcm63xx_regs_spi {
+       SPI_RX_DATA,
+ };
+-#define __GEN_SPI_RSET_BASE(__cpu, __rset)                            \
+-      case SPI_## __rset:                                             \
+-              return SPI_## __cpu ##_## __rset;
+-
+-#define __GEN_SPI_RSET(__cpu)                                         \
+-      switch (reg) {                                                  \
+-      __GEN_SPI_RSET_BASE(__cpu, CMD)                                 \
+-      __GEN_SPI_RSET_BASE(__cpu, INT_STATUS)                          \
+-      __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST)                         \
+-      __GEN_SPI_RSET_BASE(__cpu, INT_MASK)                            \
+-      __GEN_SPI_RSET_BASE(__cpu, ST)                                  \
+-      __GEN_SPI_RSET_BASE(__cpu, CLK_CFG)                             \
+-      __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE)                           \
+-      __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL)                            \
+-      __GEN_SPI_RSET_BASE(__cpu, RX_TAIL)                             \
+-      __GEN_SPI_RSET_BASE(__cpu, MSG_CTL)                             \
+-      __GEN_SPI_RSET_BASE(__cpu, MSG_DATA)                            \
+-      __GEN_SPI_RSET_BASE(__cpu, RX_DATA)                             \
+-      }
+-
+ #define __GEN_SPI_REGS_TABLE(__cpu)                                   \
+       [SPI_CMD]               = SPI_## __cpu ##_CMD,                  \
+       [SPI_INT_STATUS]        = SPI_## __cpu ##_INT_STATUS,           \
+@@ -66,20 +46,9 @@ enum bcm63xx_regs_spi {
+ static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
+ {
+-#ifdef BCMCPU_RUNTIME_DETECT
+       extern const unsigned long *bcm63xx_regs_spi;
+       return bcm63xx_regs_spi[reg];
+-#else
+-#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
+-      __GEN_SPI_RSET(6348)
+-#endif
+-#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
+-      defined(CONFIG_BCM63XX_CPU_6368)
+-      __GEN_SPI_RSET(6358)
+-#endif
+-#endif
+-      return 0;
+ }
+ #endif /* BCM63XX_DEV_SPI_H */
diff --git a/target/linux/brcm63xx/patches-3.14/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch b/target/linux/brcm63xx/patches-3.14/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
new file mode 100644 (file)
index 0000000..0dba2e2
--- /dev/null
@@ -0,0 +1,89 @@
+From ed6c71de07ad042691ec02e9eb97375ddc91ed01 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:45:22 +0100
+Subject: [PATCH 6/8] MIPS: BCM63XX: remove !RUNTIME_DETECT usage from enet
+ code
+
+---
+ arch/mips/bcm63xx/dev-enet.c                       |  4 --
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    | 46 ----------------------
+ 2 files changed, 50 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -14,7 +14,6 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+-#ifdef BCMCPU_RUNTIME_DETECT
+ static const unsigned long bcm6348_regs_enetdmac[] = {
+       [ENETDMAC_CHANCFG]      = ENETDMAC_CHANCFG_REG,
+       [ENETDMAC_IR]           = ENETDMAC_IR_REG,
+@@ -43,9 +42,6 @@ static __init void bcm63xx_enetdmac_regs
+       else
+               bcm63xx_regs_enetdmac = bcm6348_regs_enetdmac;
+ }
+-#else
+-static __init void bcm63xx_enetdmac_regs_init(void) { }
+-#endif
+ static struct resource shared_res[] = {
+       {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -112,55 +112,9 @@ enum bcm63xx_regs_enetdmac {
+ static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
+ {
+-#ifdef BCMCPU_RUNTIME_DETECT
+       extern const unsigned long *bcm63xx_regs_enetdmac;
+       return bcm63xx_regs_enetdmac[reg];
+-#else
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-      switch (reg) {
+-      case ENETDMAC_CHANCFG:
+-              return ENETDMA_6345_CHANCFG_REG;
+-      case ENETDMAC_IR:
+-              return ENETDMA_6345_IR_REG;
+-      case ENETDMAC_IRMASK:
+-              return ENETDMA_6345_IRMASK_REG;
+-      case ENETDMAC_MAXBURST:
+-              return ENETDMA_6345_MAXBURST_REG;
+-      case ENETDMAC_BUFALLOC:
+-              return ENETDMA_6345_BUFALLOC_REG;
+-      case ENETDMAC_RSTART:
+-              return ENETDMA_6345_RSTART_REG;
+-      case ENETDMAC_FC:
+-              return ENETDMA_6345_FC_REG;
+-      case ENETDMAC_LEN:
+-              return ENETDMA_6345_LEN_REG;
+-      }
+-#endif
+-#if defined(CONFIG_BCM63XX_CPU_6328) || \
+-      defined(CONFIG_BCM63XX_CPU_6338) || \
+-      defined(CONFIG_BCM63XX_CPU_6348) || \
+-      defined(CONFIG_BCM63XX_CPU_6358) || \
+-      defined(CONFIG_BCM63XX_CPU_6362) || \
+-      defined(CONFIG_BCM63XX_CPU_6368)
+-      switch (reg) {
+-      case ENETDMAC_CHANCFG:
+-              return ENETDMAC_CHANCFG_REG;
+-      case ENETDMAC_IR:
+-              return ENETDMAC_IR_REG;
+-      case ENETDMAC_IRMASK:
+-              return ENETDMAC_IRMASK_REG;
+-      case ENETDMAC_MAXBURST:
+-              return ENETDMAC_MAXBURST_REG;
+-      case ENETDMAC_BUFALLOC:
+-      case ENETDMAC_RSTART:
+-      case ENETDMAC_FC:
+-      case ENETDMAC_LEN:
+-              return 0;
+-      }
+-#endif
+-#endif
+-      return 0;
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch b/target/linux/brcm63xx/patches-3.14/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
new file mode 100644 (file)
index 0000000..6316b8d
--- /dev/null
@@ -0,0 +1,23 @@
+From 12c6957004d6770f4b34d59d8a3cafd5d8bfce15 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 14:06:12 +0100
+Subject: [PATCH 7/8] MIPS: BCM63XX: remove !RUNTIME_DETECT in
+ cpu-feature-overrides
+
+All three SoCs have in common they have a BMIPS32/BMIPS3300 CPU, so
+we can replace this as no SoC with BMIPS4350 support enabled.
+---
+ arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+@@ -24,7 +24,7 @@
+ #define cpu_has_smartmips             0
+ #define cpu_has_vtag_icache           0
+-#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
++#if !defined(CONFIG_SYS_HAS_CPU_BMIPS4350)
+ #define cpu_has_dc_aliases            0
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch b/target/linux/brcm63xx/patches-3.14/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
new file mode 100644 (file)
index 0000000..e40cfa0
--- /dev/null
@@ -0,0 +1,199 @@
+From 78c3d2e796a28ad55f6c2310a11ab22e91bb52fc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 2 Dec 2013 12:30:44 +0100
+Subject: [PATCH 8/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code for
+ bcmcpu_get_id
+
+Use the same pattern as with get_*_cpu_type() to allow the compiler
+to remove code for non enabled devices.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c                          |  11 +--
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 120 +++++++----------------
+ 2 files changed, 38 insertions(+), 93 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -24,7 +24,9 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
+ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+-static u16 bcm63xx_cpu_id;
++u16 bcm63xx_cpu_id __read_mostly;
++EXPORT_SYMBOL(bcm63xx_cpu_id);
++
+ static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+@@ -97,13 +99,6 @@ static const int bcm6368_irqs[] = {
+ };
+-u16 __bcm63xx_get_cpu_id(void)
+-{
+-      return bcm63xx_cpu_id;
+-}
+-
+-EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
+-
+ u8 bcm63xx_get_cpu_rev(void)
+ {
+       return bcm63xx_cpu_rev;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -19,118 +19,68 @@
+ #define BCM6368_CPU_ID                0x6368
+ void __init bcm63xx_cpu_init(void);
+-u16 __bcm63xx_get_cpu_id(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
++static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
++{
++      switch (cpu_id) {
+ #ifdef CONFIG_BCM63XX_CPU_3368
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM3368_CPU_ID
+-# endif
+-# define BCMCPU_IS_3368()     (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
+-#else
+-# define BCMCPU_IS_3368()     (0)
++              case BCM3368_CPU_ID:
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6328_CPU_ID
+-# endif
+-# define BCMCPU_IS_6328()     (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+-#else
+-# define BCMCPU_IS_6328()     (0)
++              case BCM6328_CPU_ID:
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6338_CPU_ID
+-# endif
+-# define BCMCPU_IS_6338()     (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+-#else
+-# define BCMCPU_IS_6338()     (0)
++              case BCM6338_CPU_ID:
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6345_CPU_ID
+-# endif
+-# define BCMCPU_IS_6345()     (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+-#else
+-# define BCMCPU_IS_6345()     (0)
++              case BCM6345_CPU_ID:
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6348_CPU_ID
+-# endif
+-# define BCMCPU_IS_6348()     (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
+-#else
+-# define BCMCPU_IS_6348()     (0)
++              case BCM6348_CPU_ID:
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6358_CPU_ID
+-# endif
+-# define BCMCPU_IS_6358()     (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+-#else
+-# define BCMCPU_IS_6358()     (0)
++              case BCM6358_CPU_ID:
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6362
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6362_CPU_ID
+-# endif
+-# define BCMCPU_IS_6362()     (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+-#else
+-# define BCMCPU_IS_6362()     (0)
++              case BCM6362_CPU_ID:
+ #endif
+-
+ #ifdef CONFIG_BCM63XX_CPU_6368
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()        BCM6368_CPU_ID
+-# endif
+-# define BCMCPU_IS_6368()     (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
+-#else
+-# define BCMCPU_IS_6368()     (0)
+-#endif
+-
+-#ifndef bcm63xx_get_cpu_id
+-#error "No CPU support configured"
++              case BCM6368_CPU_ID:
+ #endif
++              break;
++      default:
++              unreachable();
++      }
++
++      return cpu_id;
++}
++
++extern u16 bcm63xx_cpu_id;
++
++static inline u16 __pure bcm63xx_get_cpu_id(void)
++{
++      const u16 cpu_id = bcm63xx_cpu_id;
++
++      return __bcm63xx_get_cpu_id(cpu_id);
++}
++
++#define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
++#define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
++#define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
++#define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
++#define BCMCPU_IS_6348()      (bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
++#define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
++#define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
++#define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.14/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch b/target/linux/brcm63xx/patches-3.14/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch
new file mode 100644 (file)
index 0000000..f4d98c3
--- /dev/null
@@ -0,0 +1,42 @@
+From 653dcc09407a695efb203337c6f72515d4c4ee43 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 21 Mar 2013 17:05:15 +0100
+Subject: [PATCH 29/53] MIPS: BCM63XX: rename __dispatch_internal to
+ __dispatch_internal_32
+
+Make it follow the same naming convention as the other functions.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,7 +19,7 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+-static void __dispatch_internal(void) __maybe_unused;
++static void __dispatch_internal_32(void) __maybe_unused;
+ static void __dispatch_internal_64(void) __maybe_unused;
+ static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
+ static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
+@@ -117,7 +117,7 @@ static void bcm63xx_init_irq(void)
+       }
+       if (irq_bits == 32) {
+-              dispatch_internal = __dispatch_internal;
++              dispatch_internal = __dispatch_internal_32;
+               internal_irq_mask = __internal_irq_mask_32;
+               internal_irq_unmask = __internal_irq_unmask_32;
+       } else {
+@@ -149,7 +149,7 @@ static inline void handle_internal(int i
+  * will resume the loop where it ended the last time we left this
+  * function.
+  */
+-static void __dispatch_internal(void)
++static void __dispatch_internal_32(void)
+ {
+       u32 pending;
+       static int i;
diff --git a/target/linux/brcm63xx/patches-3.14/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch b/target/linux/brcm63xx/patches-3.14/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
new file mode 100644 (file)
index 0000000..fb57939
--- /dev/null
@@ -0,0 +1,223 @@
+From c28c639b031385ecf965eecf3bfb532e88044c89 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:52:53 +0100
+Subject: [PATCH 30/53] MIPS: BCM63XX: move bcm63xx_init_irq down
+
+Allows up to drop the prototypes from the top.
+---
+ arch/mips/bcm63xx/irq.c | 190 +++++++++++++++++++++++-------------------------
+ 1 file changed, 92 insertions(+), 98 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,13 +19,6 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+-static void __dispatch_internal_32(void) __maybe_unused;
+-static void __dispatch_internal_64(void) __maybe_unused;
+-static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
+-static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
+-static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
+-static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
+-
+ static u32 irq_stat_addr, irq_mask_addr;
+ static void (*dispatch_internal)(void);
+ static int is_ext_irq_cascaded;
+@@ -35,97 +28,6 @@ static unsigned int ext_irq_cfg_reg1, ex
+ static void (*internal_irq_mask)(unsigned int irq);
+ static void (*internal_irq_unmask)(unsigned int irq);
+-static void bcm63xx_init_irq(void)
+-{
+-      int irq_bits;
+-
+-      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
+-      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
+-
+-      switch (bcm63xx_get_cpu_id()) {
+-      case BCM3368_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_3368_REG;
+-              irq_mask_addr += PERF_IRQMASK_3368_REG;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+-              break;
+-      case BCM6328_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6328_REG;
+-              irq_mask_addr += PERF_IRQMASK_6328_REG;
+-              irq_bits = 64;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+-              break;
+-      case BCM6338_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6338_REG;
+-              irq_mask_addr += PERF_IRQMASK_6338_REG;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+-              break;
+-      case BCM6345_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6345_REG;
+-              irq_mask_addr += PERF_IRQMASK_6345_REG;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+-              break;
+-      case BCM6348_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6348_REG;
+-              irq_mask_addr += PERF_IRQMASK_6348_REG;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+-              break;
+-      case BCM6358_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6358_REG;
+-              irq_mask_addr += PERF_IRQMASK_6358_REG;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+-              break;
+-      case BCM6362_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6362_REG;
+-              irq_mask_addr += PERF_IRQMASK_6362_REG;
+-              irq_bits = 64;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
+-              break;
+-      case BCM6368_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6368_REG;
+-              irq_mask_addr += PERF_IRQMASK_6368_REG;
+-              irq_bits = 64;
+-              ext_irq_count = 6;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+-              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
+-              break;
+-      default:
+-              BUG();
+-      }
+-
+-      if (irq_bits == 32) {
+-              dispatch_internal = __dispatch_internal_32;
+-              internal_irq_mask = __internal_irq_mask_32;
+-              internal_irq_unmask = __internal_irq_unmask_32;
+-      } else {
+-              dispatch_internal = __dispatch_internal_64;
+-              internal_irq_mask = __internal_irq_mask_64;
+-              internal_irq_unmask = __internal_irq_unmask_64;
+-      }
+-}
+ static inline u32 get_ext_irq_perf_reg(int irq)
+ {
+@@ -451,6 +353,98 @@ static struct irqaction cpu_ext_cascade_
+       .flags          = IRQF_NO_THREAD,
+ };
++static void bcm63xx_init_irq(void)
++{
++      int irq_bits;
++
++      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
++      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
++
++      switch (bcm63xx_get_cpu_id()) {
++      case BCM3368_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_3368_REG;
++              irq_mask_addr += PERF_IRQMASK_3368_REG;
++              irq_bits = 32;
++              ext_irq_count = 4;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
++              break;
++      case BCM6328_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6328_REG;
++              irq_mask_addr += PERF_IRQMASK_6328_REG;
++              irq_bits = 64;
++              ext_irq_count = 4;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
++              break;
++      case BCM6338_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6338_REG;
++              irq_mask_addr += PERF_IRQMASK_6338_REG;
++              irq_bits = 32;
++              ext_irq_count = 4;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
++              break;
++      case BCM6345_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6345_REG;
++              irq_mask_addr += PERF_IRQMASK_6345_REG;
++              irq_bits = 32;
++              ext_irq_count = 4;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
++              break;
++      case BCM6348_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6348_REG;
++              irq_mask_addr += PERF_IRQMASK_6348_REG;
++              irq_bits = 32;
++              ext_irq_count = 4;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
++              break;
++      case BCM6358_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6358_REG;
++              irq_mask_addr += PERF_IRQMASK_6358_REG;
++              irq_bits = 32;
++              ext_irq_count = 4;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
++              break;
++      case BCM6362_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6362_REG;
++              irq_mask_addr += PERF_IRQMASK_6362_REG;
++              irq_bits = 64;
++              ext_irq_count = 4;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
++              break;
++      case BCM6368_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6368_REG;
++              irq_mask_addr += PERF_IRQMASK_6368_REG;
++              irq_bits = 64;
++              ext_irq_count = 6;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
++              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
++              break;
++      default:
++              BUG();
++      }
++
++      if (irq_bits == 32) {
++              dispatch_internal = __dispatch_internal_32;
++              internal_irq_mask = __internal_irq_mask_32;
++              internal_irq_unmask = __internal_irq_unmask_32;
++      } else {
++              dispatch_internal = __dispatch_internal_64;
++              internal_irq_mask = __internal_irq_mask_64;
++              internal_irq_unmask = __internal_irq_unmask_64;
++      }
++}
++
+ void __init arch_init_irq(void)
+ {
+       int i;
diff --git a/target/linux/brcm63xx/patches-3.14/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch b/target/linux/brcm63xx/patches-3.14/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
new file mode 100644 (file)
index 0000000..f0311ce
--- /dev/null
@@ -0,0 +1,167 @@
+From 01bf26c51b427e24ac69f604d33f7d9360a9e470 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 18 Apr 2013 21:14:49 +0200
+Subject: [PATCH 31/53] MIPS: BCM63XX: replace irq dispatch code with a generic
+ version
+
+The generic version uses a variable length of u32 registers of u32/u64.
+This allows easier support for longer registers without having to rewrite
+verything.
+
+This "generic" version is not slower than the old version in the best case
+(= i == next set bit), and twice as fast in the worst case in 64 bits.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 130 +++++++++++++++++++++---------------------------
+ 1 file changed, 56 insertions(+), 74 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -51,47 +51,65 @@ static inline void handle_internal(int i
+  * will resume the loop where it ended the last time we left this
+  * function.
+  */
+-static void __dispatch_internal_32(void)
+-{
+-      u32 pending;
+-      static int i;
+-
+-      pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
+-
+-      if (!pending)
+-              return ;
+-
+-      while (1) {
+-              int to_call = i;
+-              i = (i + 1) & 0x1f;
+-              if (pending & (1 << to_call)) {
+-                      handle_internal(to_call);
+-                      break;
+-              }
+-      }
++#define BUILD_IPIC_INTERNAL(width)                                    \
++void __dispatch_internal_##width(void)                                        \
++{                                                                     \
++      u32 pending[width / 32];                                        \
++      unsigned int src, tgt;                                          \
++      bool irqs_pending = false;                                      \
++      static int i;                                                   \
++                                                                      \
++      /* read registers in reverse order */                           \
++      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
++              u32 val;                                                \
++                                                                      \
++              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
++              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
++              pending[--tgt] = val;                                   \
++                                                                      \
++              if (val)                                                \
++                      irqs_pending = true;                            \
++      }                                                               \
++                                                                      \
++      if (!irqs_pending)                                              \
++              return;                                                 \
++                                                                      \
++      while (1) {                                                     \
++              int to_call = i;                                        \
++                                                                      \
++              i = (i + 1) & (width - 1);                              \
++              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
++                      handle_internal(to_call);                       \
++                      break;                                          \
++              }                                                       \
++      }                                                               \
++}                                                                     \
++                                                                      \
++static void __internal_irq_mask_##width(unsigned int irq)             \
++{                                                                     \
++      u32 val;                                                        \
++      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
++      unsigned bit = irq & 0x1f;                                      \
++                                                                      \
++      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
++      val &= ~(1 << bit);                                             \
++      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
++}                                                                     \
++                                                                      \
++static void __internal_irq_unmask_##width(unsigned int irq)           \
++{                                                                     \
++      u32 val;                                                        \
++      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
++      unsigned bit = irq & 0x1f;                                      \
++                                                                      \
++      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
++      val |= (1 << bit);                                              \
++      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
+ }
+-static void __dispatch_internal_64(void)
+-{
+-      u64 pending;
+-      static int i;
+-
+-      pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
+-
+-      if (!pending)
+-              return ;
+-
+-      while (1) {
+-              int to_call = i;
+-
+-              i = (i + 1) & 0x3f;
+-              if (pending & (1ull << to_call)) {
+-                      handle_internal(to_call);
+-                      break;
+-              }
+-      }
+-}
++BUILD_IPIC_INTERNAL(32);
++BUILD_IPIC_INTERNAL(64);
+ asmlinkage void plat_irq_dispatch(void)
+ {
+@@ -128,42 +146,6 @@ asmlinkage void plat_irq_dispatch(void)
+  * internal IRQs operations: only mask/unmask on PERF irq mask
+  * register.
+  */
+-static void __internal_irq_mask_32(unsigned int irq)
+-{
+-      u32 mask;
+-
+-      mask = bcm_readl(irq_mask_addr);
+-      mask &= ~(1 << irq);
+-      bcm_writel(mask, irq_mask_addr);
+-}
+-
+-static void __internal_irq_mask_64(unsigned int irq)
+-{
+-      u64 mask;
+-
+-      mask = bcm_readq(irq_mask_addr);
+-      mask &= ~(1ull << irq);
+-      bcm_writeq(mask, irq_mask_addr);
+-}
+-
+-static void __internal_irq_unmask_32(unsigned int irq)
+-{
+-      u32 mask;
+-
+-      mask = bcm_readl(irq_mask_addr);
+-      mask |= (1 << irq);
+-      bcm_writel(mask, irq_mask_addr);
+-}
+-
+-static void __internal_irq_unmask_64(unsigned int irq)
+-{
+-      u64 mask;
+-
+-      mask = bcm_readq(irq_mask_addr);
+-      mask |= (1ull << irq);
+-      bcm_writeq(mask, irq_mask_addr);
+-}
+-
+ static void bcm63xx_internal_irq_mask(struct irq_data *d)
+ {
+       internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
diff --git a/target/linux/brcm63xx/patches-3.14/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch b/target/linux/brcm63xx/patches-3.14/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch
new file mode 100644 (file)
index 0000000..e53f230
--- /dev/null
@@ -0,0 +1,183 @@
+From 1003fb4a5ee9fcff518f20eefdee1a9bf500af7e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 25 Apr 2013 00:24:06 +0200
+Subject: [PATCH 32/53] MIPS: BCM63XX: append irq line number to
+ irq_{stat,mask}*
+
+The SMP capable irq controllers have two interupt output pins which are
+controlled through separate registers, so make the variables arrays.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c                           | 51 ++++++++++++-----------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 16 +++----
+ 2 files changed, 34 insertions(+), 33 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,7 +19,8 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+-static u32 irq_stat_addr, irq_mask_addr;
++static u32 irq_stat_addr[2];
++static u32 irq_mask_addr[2];
+ static void (*dispatch_internal)(void);
+ static int is_ext_irq_cascaded;
+ static unsigned int ext_irq_count;
+@@ -64,8 +65,8 @@ void __dispatch_internal_##width(void)
+       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
+               u32 val;                                                \
+                                                                       \
+-              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
+-              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
++              val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));  \
++              val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32)); \
+               pending[--tgt] = val;                                   \
+                                                                       \
+               if (val)                                                \
+@@ -92,9 +93,9 @@ static void __internal_irq_mask_##width(
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
+                                                                       \
+-      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
++      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
+       val &= ~(1 << bit);                                             \
+-      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
++      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
+ }                                                                     \
+                                                                       \
+ static void __internal_irq_unmask_##width(unsigned int irq)           \
+@@ -103,9 +104,9 @@ static void __internal_irq_unmask_##widt
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
+                                                                       \
+-      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
++      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
+       val |= (1 << bit);                                              \
+-      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
++      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
+ }
+ BUILD_IPIC_INTERNAL(32);
+@@ -339,20 +340,20 @@ static void bcm63xx_init_irq(void)
+ {
+       int irq_bits;
+-      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
+-      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
++      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
++      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM3368_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_3368_REG;
+-              irq_mask_addr += PERF_IRQMASK_3368_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
++              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+               break;
+       case BCM6328_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6328_REG;
+-              irq_mask_addr += PERF_IRQMASK_6328_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
++              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+               irq_bits = 64;
+               ext_irq_count = 4;
+               is_ext_irq_cascaded = 1;
+@@ -361,29 +362,29 @@ static void bcm63xx_init_irq(void)
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+               break;
+       case BCM6338_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6338_REG;
+-              irq_mask_addr += PERF_IRQMASK_6338_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
++              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+               break;
+       case BCM6345_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6345_REG;
+-              irq_mask_addr += PERF_IRQMASK_6345_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
++              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+               break;
+       case BCM6348_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6348_REG;
+-              irq_mask_addr += PERF_IRQMASK_6348_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
++              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+               break;
+       case BCM6358_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6358_REG;
+-              irq_mask_addr += PERF_IRQMASK_6358_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
++              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
+               irq_bits = 32;
+               ext_irq_count = 4;
+               is_ext_irq_cascaded = 1;
+@@ -392,8 +393,8 @@ static void bcm63xx_init_irq(void)
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+               break;
+       case BCM6362_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6362_REG;
+-              irq_mask_addr += PERF_IRQMASK_6362_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
++              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
+               irq_bits = 64;
+               ext_irq_count = 4;
+               is_ext_irq_cascaded = 1;
+@@ -402,8 +403,8 @@ static void bcm63xx_init_irq(void)
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
+               break;
+       case BCM6368_CPU_ID:
+-              irq_stat_addr += PERF_IRQSTAT_6368_REG;
+-              irq_mask_addr += PERF_IRQMASK_6368_REG;
++              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
++              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
+               irq_bits = 64;
+               ext_irq_count = 6;
+               is_ext_irq_cascaded = 1;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -215,23 +215,23 @@
+ /* Interrupt Mask register */
+ #define PERF_IRQMASK_3368_REG         0xc
+-#define PERF_IRQMASK_6328_REG         0x20
++#define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6338_REG         0xc
+ #define PERF_IRQMASK_6345_REG         0xc
+ #define PERF_IRQMASK_6348_REG         0xc
+-#define PERF_IRQMASK_6358_REG         0xc
+-#define PERF_IRQMASK_6362_REG         0x20
+-#define PERF_IRQMASK_6368_REG         0x20
++#define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
++#define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
++#define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
+-#define PERF_IRQSTAT_6328_REG         0x28
++#define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6338_REG         0x10
+ #define PERF_IRQSTAT_6345_REG         0x10
+ #define PERF_IRQSTAT_6348_REG         0x10
+-#define PERF_IRQSTAT_6358_REG         0x10
+-#define PERF_IRQSTAT_6362_REG         0x28
+-#define PERF_IRQSTAT_6368_REG         0x28
++#define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
++#define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
++#define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
diff --git a/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch b/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
new file mode 100644 (file)
index 0000000..a21137f
--- /dev/null
@@ -0,0 +1,92 @@
+From 842f213228e6fc9fd6cca01ab5128623112aa7a9 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 25 Apr 2013 00:31:29 +0200
+Subject: [PATCH 33/53] MIPS: BCM63XX: populate irq_{stat,mask}_addr for second
+ pin
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -342,11 +342,15 @@ static void bcm63xx_init_irq(void)
+       irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
+       irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
++      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
++      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM3368_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
+               irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
++              irq_stat_addr[1] = 0;
++              irq_stat_addr[1] = 0;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+@@ -354,6 +358,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6328_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+               irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
++              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
++              irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1);
+               irq_bits = 64;
+               ext_irq_count = 4;
+               is_ext_irq_cascaded = 1;
+@@ -364,6 +370,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6338_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
+               irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
++              irq_stat_addr[1] = 0;
++              irq_mask_addr[1] = 0;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+@@ -371,6 +379,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6345_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
+               irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
++              irq_stat_addr[1] = 0;
++              irq_mask_addr[1] = 0;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+@@ -378,6 +388,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6348_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
+               irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
++              irq_stat_addr[1] = 0;
++              irq_mask_addr[1] = 0;
+               irq_bits = 32;
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+@@ -385,6 +397,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6358_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
+               irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
++              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
++              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
+               irq_bits = 32;
+               ext_irq_count = 4;
+               is_ext_irq_cascaded = 1;
+@@ -395,6 +409,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6362_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
+               irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
++              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
++              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
+               irq_bits = 64;
+               ext_irq_count = 4;
+               is_ext_irq_cascaded = 1;
+@@ -405,6 +421,8 @@ static void bcm63xx_init_irq(void)
+       case BCM6368_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
+               irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
++              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
++              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
+               irq_bits = 64;
+               ext_irq_count = 6;
+               is_ext_irq_cascaded = 1;
diff --git a/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch b/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch
new file mode 100644 (file)
index 0000000..1b8921c
--- /dev/null
@@ -0,0 +1,70 @@
+From a33bb660c712447ba8b561109cda6734954a6efa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 26 Apr 2013 11:21:16 +0200
+Subject: [PATCH 34/53] MIPS: BCM63XX: add pin argument to dispatch internal
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
+ 1 file changed, 10 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,9 +19,10 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
++
+ static u32 irq_stat_addr[2];
+ static u32 irq_mask_addr[2];
+-static void (*dispatch_internal)(void);
++static void (*dispatch_internal)(int pin);
+ static int is_ext_irq_cascaded;
+ static unsigned int ext_irq_count;
+ static unsigned int ext_irq_start, ext_irq_end;
+@@ -54,19 +55,20 @@ static inline void handle_internal(int i
+  */
+ #define BUILD_IPIC_INTERNAL(width)                                    \
+-void __dispatch_internal_##width(void)                                        \
++void __dispatch_internal_##width(int pin)                             \
+ {                                                                     \
+       u32 pending[width / 32];                                        \
+       unsigned int src, tgt;                                          \
+       bool irqs_pending = false;                                      \
+-      static int i;                                                   \
++      static int i[2];                                                \
++      int *next = &i[pin];                                            \
+                                                                       \
+       /* read registers in reverse order */                           \
+       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
+               u32 val;                                                \
+                                                                       \
+-              val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));  \
+-              val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32)); \
++              val = bcm_readl(irq_stat_addr[pin] + src * sizeof(u32)); \
++              val &= bcm_readl(irq_mask_addr[pin] + src * sizeof(u32)); \
+               pending[--tgt] = val;                                   \
+                                                                       \
+               if (val)                                                \
+@@ -77,9 +79,9 @@ void __dispatch_internal_##width(void)
+               return;                                                 \
+                                                                       \
+       while (1) {                                                     \
+-              int to_call = i;                                        \
++              int to_call = *next;                                    \
+                                                                       \
+-              i = (i + 1) & (width - 1);                              \
++              *next = (*next + 1) & (width - 1);                      \
+               if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
+                       handle_internal(to_call);                       \
+                       break;                                          \
+@@ -129,7 +131,7 @@ asmlinkage void plat_irq_dispatch(void)
+               if (cause & CAUSEF_IP1)
+                       do_IRQ(1);
+               if (cause & CAUSEF_IP2)
+-                      dispatch_internal();
++                      dispatch_internal(0);
+               if (!is_ext_irq_cascaded) {
+                       if (cause & CAUSEF_IP3)
+                               do_IRQ(IRQ_EXT_0);
diff --git a/target/linux/brcm63xx/patches-3.14/324-MIPS-BCM63XX-protect-irq-register-accesses.patch b/target/linux/brcm63xx/patches-3.14/324-MIPS-BCM63XX-protect-irq-register-accesses.patch
new file mode 100644 (file)
index 0000000..c38137d
--- /dev/null
@@ -0,0 +1,158 @@
+From 85257b702e1d4c6dcc839c737833c42ca53bae93 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 21 Apr 2013 15:38:56 +0200
+Subject: [PATCH 35/53] MIPS: BCM63XX: protect irq register accesses
+
+---
+ arch/mips/bcm63xx/irq.c | 26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -12,6 +12,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/module.h>
+ #include <linux/irq.h>
++#include <linux/spinlock.h>
+ #include <asm/irq_cpu.h>
+ #include <asm/mipsregs.h>
+ #include <bcm63xx_cpu.h>
+@@ -20,6 +21,9 @@
+ #include <bcm63xx_irq.h>
++static DEFINE_SPINLOCK(ipic_lock);
++static DEFINE_SPINLOCK(epic_lock);
++
+ static u32 irq_stat_addr[2];
+ static u32 irq_mask_addr[2];
+ static void (*dispatch_internal)(int pin);
+@@ -62,8 +66,10 @@ void __dispatch_internal_##width(int pin
+       bool irqs_pending = false;                                      \
+       static int i[2];                                                \
+       int *next = &i[pin];                                            \
++      unsigned long flags;                                            \
+                                                                       \
+       /* read registers in reverse order */                           \
++      spin_lock_irqsave(&ipic_lock, flags);                           \
+       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
+               u32 val;                                                \
+                                                                       \
+@@ -74,6 +80,7 @@ void __dispatch_internal_##width(int pin
+               if (val)                                                \
+                       irqs_pending = true;                            \
+       }                                                               \
++      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+                                                                       \
+       if (!irqs_pending)                                              \
+               return;                                                 \
+@@ -94,10 +101,13 @@ static void __internal_irq_mask_##width(
+       u32 val;                                                        \
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
++      unsigned long flags;                                            \
+                                                                       \
++      spin_lock_irqsave(&ipic_lock, flags);                           \
+       val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
+       val &= ~(1 << bit);                                             \
+       bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
++      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+ }                                                                     \
+                                                                       \
+ static void __internal_irq_unmask_##width(unsigned int irq)           \
+@@ -105,10 +115,13 @@ static void __internal_irq_unmask_##widt
+       u32 val;                                                        \
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
++      unsigned long flags;                                            \
+                                                                       \
++      spin_lock_irqsave(&ipic_lock, flags);                           \
+       val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
+       val |= (1 << bit);                                              \
+       bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
++      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+ }
+ BUILD_IPIC_INTERNAL(32);
+@@ -167,8 +180,10 @@ static void bcm63xx_external_irq_mask(st
+ {
+       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+       u32 reg, regaddr;
++      unsigned long flags;
+       regaddr = get_ext_irq_perf_reg(irq);
++      spin_lock_irqsave(&epic_lock, flags);
+       reg = bcm_perf_readl(regaddr);
+       if (BCMCPU_IS_6348())
+@@ -177,6 +192,8 @@ static void bcm63xx_external_irq_mask(st
+               reg &= ~EXTIRQ_CFG_MASK(irq % 4);
+       bcm_perf_writel(reg, regaddr);
++      spin_unlock_irqrestore(&epic_lock, flags);
++
+       if (is_ext_irq_cascaded)
+               internal_irq_mask(irq + ext_irq_start);
+ }
+@@ -185,8 +202,10 @@ static void bcm63xx_external_irq_unmask(
+ {
+       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+       u32 reg, regaddr;
++      unsigned long flags;
+       regaddr = get_ext_irq_perf_reg(irq);
++      spin_lock_irqsave(&epic_lock, flags);
+       reg = bcm_perf_readl(regaddr);
+       if (BCMCPU_IS_6348())
+@@ -195,6 +214,7 @@ static void bcm63xx_external_irq_unmask(
+               reg |= EXTIRQ_CFG_MASK(irq % 4);
+       bcm_perf_writel(reg, regaddr);
++      spin_unlock_irqrestore(&epic_lock, flags);
+       if (is_ext_irq_cascaded)
+               internal_irq_unmask(irq + ext_irq_start);
+@@ -204,8 +224,10 @@ static void bcm63xx_external_irq_clear(s
+ {
+       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+       u32 reg, regaddr;
++      unsigned long flags;
+       regaddr = get_ext_irq_perf_reg(irq);
++      spin_lock_irqsave(&epic_lock, flags);
+       reg = bcm_perf_readl(regaddr);
+       if (BCMCPU_IS_6348())
+@@ -214,6 +236,7 @@ static void bcm63xx_external_irq_clear(s
+               reg |= EXTIRQ_CFG_CLEAR(irq % 4);
+       bcm_perf_writel(reg, regaddr);
++      spin_unlock_irqrestore(&epic_lock, flags);
+ }
+ static int bcm63xx_external_irq_set_type(struct irq_data *d,
+@@ -222,6 +245,7 @@ static int bcm63xx_external_irq_set_type
+       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+       u32 reg, regaddr;
+       int levelsense, sense, bothedge;
++      unsigned long flags;
+       flow_type &= IRQ_TYPE_SENSE_MASK;
+@@ -256,6 +280,7 @@ static int bcm63xx_external_irq_set_type
+       }
+       regaddr = get_ext_irq_perf_reg(irq);
++      spin_lock_irqsave(&epic_lock, flags);
+       reg = bcm_perf_readl(regaddr);
+       irq %= 4;
+@@ -300,6 +325,7 @@ static int bcm63xx_external_irq_set_type
+       }
+       bcm_perf_writel(reg, regaddr);
++      spin_unlock_irqrestore(&epic_lock, flags);
+       irqd_set_trigger_type(d, flow_type);
+       if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
diff --git a/target/linux/brcm63xx/patches-3.14/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch b/target/linux/brcm63xx/patches-3.14/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
new file mode 100644 (file)
index 0000000..189965a
--- /dev/null
@@ -0,0 +1,92 @@
+From df6661d1b5c001eb91ce07f364fd5b6468fd6f99 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 26 Apr 2013 12:03:15 +0200
+Subject: [PATCH 36/53] MIPS: BCM63XX: wire up the second cpu's irq line
+
+---
+ arch/mips/bcm63xx/irq.c | 44 +++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 37 insertions(+), 7 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -102,11 +102,17 @@ static void __internal_irq_mask_##width(
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
+       unsigned long flags;                                            \
++      int cpu;                                                        \
+                                                                       \
+       spin_lock_irqsave(&ipic_lock, flags);                           \
+-      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
+-      val &= ~(1 << bit);                                             \
+-      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
++      for_each_present_cpu(cpu) {                                     \
++              if (!irq_mask_addr[cpu])                                \
++                      break;                                          \
++                                                                      \
++              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
++              val &= ~(1 << bit);                                     \
++              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
++      }                                                               \
+       spin_unlock_irqrestore(&ipic_lock, flags);                      \
+ }                                                                     \
+                                                                       \
+@@ -116,11 +122,20 @@ static void __internal_irq_unmask_##widt
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
+       unsigned long flags;                                            \
++      int cpu;                                                        \
+                                                                       \
+       spin_lock_irqsave(&ipic_lock, flags);                           \
+-      val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));          \
+-      val |= (1 << bit);                                              \
+-      bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));          \
++      for_each_present_cpu(cpu) {                                     \
++              if (!irq_mask_addr[cpu])                                \
++                      break;                                          \
++                                                                      \
++              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
++              if (cpu_online(cpu))                                    \
++                      val |= (1 << bit);                              \
++              else                                                    \
++                      val &= ~(1 << bit);                             \
++              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
++      }                                                               \
+       spin_unlock_irqrestore(&ipic_lock, flags);                      \
+ }
+@@ -145,7 +160,10 @@ asmlinkage void plat_irq_dispatch(void)
+                       do_IRQ(1);
+               if (cause & CAUSEF_IP2)
+                       dispatch_internal(0);
+-              if (!is_ext_irq_cascaded) {
++              if (is_ext_irq_cascaded) {
++                      if (cause & CAUSEF_IP3)
++                              dispatch_internal(1);
++              } else {
+                       if (cause & CAUSEF_IP3)
+                               do_IRQ(IRQ_EXT_0);
+                       if (cause & CAUSEF_IP4)
+@@ -358,6 +376,14 @@ static struct irqaction cpu_ip2_cascade_
+       .flags          = IRQF_NO_THREAD,
+ };
++#ifdef CONFIG_SMP
++static struct irqaction cpu_ip3_cascade_action = {
++      .handler        = no_action,
++      .name           = "cascade_ip3",
++      .flags          = IRQF_NO_THREAD,
++};
++#endif
++
+ static struct irqaction cpu_ext_cascade_action = {
+       .handler        = no_action,
+       .name           = "cascade_extirq",
+@@ -494,4 +520,8 @@ void __init arch_init_irq(void)
+       }
+       setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
++#ifdef CONFIG_SMP
++      if (is_ext_irq_cascaded)
++              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
++#endif
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch b/target/linux/brcm63xx/patches-3.14/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
new file mode 100644 (file)
index 0000000..468cbc3
--- /dev/null
@@ -0,0 +1,83 @@
+From b665117faa0dfde70689502fc420d72bbf8e6bd4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 30 Apr 2013 11:26:53 +0200
+Subject: [PATCH 37/53] MIPS: BCM63XX: use irq_desc as argument for (un)mask
+
+In preparation for applying affinity, use the irq descriptor as the
+argument for (un)mask.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
+ 1 file changed, 10 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -31,8 +31,8 @@ static int is_ext_irq_cascaded;
+ static unsigned int ext_irq_count;
+ static unsigned int ext_irq_start, ext_irq_end;
+ static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+-static void (*internal_irq_mask)(unsigned int irq);
+-static void (*internal_irq_unmask)(unsigned int irq);
++static void (*internal_irq_mask)(struct irq_data *d);
++static void (*internal_irq_unmask)(struct irq_data *d);
+ static inline u32 get_ext_irq_perf_reg(int irq)
+@@ -96,9 +96,10 @@ void __dispatch_internal_##width(int pin
+       }                                                               \
+ }                                                                     \
+                                                                       \
+-static void __internal_irq_mask_##width(unsigned int irq)             \
++static void __internal_irq_mask_##width(struct irq_data *d)           \
+ {                                                                     \
+       u32 val;                                                        \
++      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
+       unsigned long flags;                                            \
+@@ -116,9 +117,10 @@ static void __internal_irq_mask_##width(
+       spin_unlock_irqrestore(&ipic_lock, flags);                      \
+ }                                                                     \
+                                                                       \
+-static void __internal_irq_unmask_##width(unsigned int irq)           \
++static void __internal_irq_unmask_##width(struct irq_data *d)         \
+ {                                                                     \
+       u32 val;                                                        \
++      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+       unsigned bit = irq & 0x1f;                                      \
+       unsigned long flags;                                            \
+@@ -182,12 +184,12 @@ asmlinkage void plat_irq_dispatch(void)
+  */
+ static void bcm63xx_internal_irq_mask(struct irq_data *d)
+ {
+-      internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
++      internal_irq_mask(d);
+ }
+ static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+ {
+-      internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
++      internal_irq_unmask(d);
+ }
+ /*
+@@ -213,7 +215,7 @@ static void bcm63xx_external_irq_mask(st
+       spin_unlock_irqrestore(&epic_lock, flags);
+       if (is_ext_irq_cascaded)
+-              internal_irq_mask(irq + ext_irq_start);
++              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
+ }
+ static void bcm63xx_external_irq_unmask(struct irq_data *d)
+@@ -235,7 +237,7 @@ static void bcm63xx_external_irq_unmask(
+       spin_unlock_irqrestore(&epic_lock, flags);
+       if (is_ext_irq_cascaded)
+-              internal_irq_unmask(irq + ext_irq_start);
++              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
+ }
+ static void bcm63xx_external_irq_clear(struct irq_data *d)
diff --git a/target/linux/brcm63xx/patches-3.14/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch b/target/linux/brcm63xx/patches-3.14/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
new file mode 100644 (file)
index 0000000..9394e23
--- /dev/null
@@ -0,0 +1,111 @@
+From 9249f2f6a309e3f45c35d16decdcc5b2cadcadb8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 26 Apr 2013 12:06:03 +0200
+Subject: [PATCH 38/53] MIPS: BCM63XX: allow setting affinity for IPIC
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 43 +++++++++++++++++++++++++++++++++++++------
+ 1 file changed, 37 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -32,7 +32,7 @@ static unsigned int ext_irq_count;
+ static unsigned int ext_irq_start, ext_irq_end;
+ static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+ static void (*internal_irq_mask)(struct irq_data *d);
+-static void (*internal_irq_unmask)(struct irq_data *d);
++static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
+ static inline u32 get_ext_irq_perf_reg(int irq)
+@@ -51,6 +51,20 @@ static inline void handle_internal(int i
+               do_IRQ(intbit + IRQ_INTERNAL_BASE);
+ }
++static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
++                                   const struct cpumask *m)
++{
++      bool enable = cpu_online(cpu);
++#ifdef CONFIG_SMP
++
++      if (m)
++              enable &= cpu_isset(cpu, *m);
++      else if (irqd_affinity_was_set(d))
++              enable &= cpu_isset(cpu, *d->affinity);
++#endif
++      return enable;
++}
++
+ /*
+  * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+  * prioritize any interrupt relatively to another. the static counter
+@@ -117,7 +131,8 @@ static void __internal_irq_mask_##width(
+       spin_unlock_irqrestore(&ipic_lock, flags);                      \
+ }                                                                     \
+                                                                       \
+-static void __internal_irq_unmask_##width(struct irq_data *d)         \
++static void __internal_irq_unmask_##width(struct irq_data *d,         \
++                                        const struct cpumask *m)      \
+ {                                                                     \
+       u32 val;                                                        \
+       unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+@@ -132,7 +147,7 @@ static void __internal_irq_unmask_##widt
+                       break;                                          \
+                                                                       \
+               val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+-              if (cpu_online(cpu))                                    \
++              if (enable_irq_for_cpu(cpu, d, m))                      \
+                       val |= (1 << bit);                              \
+               else                                                    \
+                       val &= ~(1 << bit);                             \
+@@ -189,7 +204,7 @@ static void bcm63xx_internal_irq_mask(st
+ static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+ {
+-      internal_irq_unmask(d);
++      internal_irq_unmask(d, NULL);
+ }
+ /*
+@@ -237,7 +252,8 @@ static void bcm63xx_external_irq_unmask(
+       spin_unlock_irqrestore(&epic_lock, flags);
+       if (is_ext_irq_cascaded)
+-              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
++              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
++                                  NULL);
+ }
+ static void bcm63xx_external_irq_clear(struct irq_data *d)
+@@ -356,6 +372,18 @@ static int bcm63xx_external_irq_set_type
+       return IRQ_SET_MASK_OK_NOCOPY;
+ }
++#ifdef CONFIG_SMP
++static int bcm63xx_internal_set_affinity(struct irq_data *data,
++                                       const struct cpumask *dest,
++                                       bool force)
++{
++      if (!irqd_irq_disabled(data))
++              internal_irq_unmask(data, dest);
++
++      return 0;
++}
++#endif
++
+ static struct irq_chip bcm63xx_internal_irq_chip = {
+       .name           = "bcm63xx_ipic",
+       .irq_mask       = bcm63xx_internal_irq_mask,
+@@ -523,7 +551,10 @@ void __init arch_init_irq(void)
+       setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+ #ifdef CONFIG_SMP
+-      if (is_ext_irq_cascaded)
++      if (is_ext_irq_cascaded) {
+               setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
++              bcm63xx_internal_irq_chip.irq_set_affinity =
++                      bcm63xx_internal_set_affinity;
++      }
+ #endif
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/328-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-3.14/328-cfe_simplify_detection.patch
new file mode 100644 (file)
index 0000000..e05c91d
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
+@@ -1,6 +1,8 @@
+ #ifndef BCM63XX_BOARD_H_
+ #define BCM63XX_BOARD_H_
++#include <asm/bootinfo.h>
++
+ const char *board_get_name(void);
+ void board_prom_init(void);
+@@ -9,4 +11,8 @@ void board_setup(void);
+ int board_register_devices(void);
++static inline bool bcm63xx_is_cfe_present(void) {
++      return fw_arg3 == 0x43464531;
++}
++
+ #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/329-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-3.14/329-bcm63xxpart_use_cfedetection.patch
new file mode 100644 (file)
index 0000000..dedd728
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -35,7 +35,7 @@
+ #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
+ #include <linux/bcm963xx_tag.h>
+-#include <asm/mach-bcm63xx/board_bcm963xx.h>
++#include <asm/mach-bcm63xx/bcm63xx_board.h>
+ #define BCM63XX_EXTENDED_SIZE 0xBFC00000      /* Extended flash address */
+@@ -43,30 +43,6 @@
+ #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
+-static int bcm63xx_detect_cfe(struct mtd_info *master)
+-{
+-      char buf[9];
+-      int ret;
+-      size_t retlen;
+-
+-      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
+-                     (void *)buf);
+-      buf[retlen] = 0;
+-
+-      if (ret)
+-              return ret;
+-
+-      if (strncmp("cfe-v", buf, 5) == 0)
+-              return 0;
+-
+-      /* very old CFE's do not have the cfe-v string, so check for magic */
+-      ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
+-                     (void *)buf);
+-      buf[retlen] = 0;
+-
+-      return strncmp("CFE1CFE1", buf, 8);
+-}
+-
+ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
+                                       struct mtd_partition **pparts,
+                                       struct mtd_part_parser_data *data)
+@@ -85,7 +61,7 @@ static int bcm63xx_parse_cfe_partitions(
+       u32 computed_crc;
+       bool rootfs_first = false;
+-      if (bcm63xx_detect_cfe(master))
++      if (!bcm63xx_is_cfe_present())
+               return -EINVAL;
+       cfe_erasesize = max_t(uint32_t, master->erasesize,
diff --git a/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
new file mode 100644 (file)
index 0000000..3f24473
--- /dev/null
@@ -0,0 +1,77 @@
+From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:08:36 +0100
+Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
+ 2 files changed, 28 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
+ u16 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
++static u32 bcm63xx_cpu_variant __read_mostly;
++
+ static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
+ };
++u32 bcm63xx_get_cpu_variant(void)
++{
++      return bcm63xx_cpu_variant;
++}
++
++EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
++
+ u8 bcm63xx_get_cpu_rev(void)
+ {
+       return bcm63xx_cpu_rev;
+@@ -334,6 +343,7 @@ void __init bcm63xx_cpu_init(void)
+       /* read out CPU type */
+       tmp = bcm_readl(chipid_reg);
+       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++      bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+       switch (bcm63xx_cpu_id) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -19,6 +19,7 @@
+ #define BCM6368_CPU_ID                0x6368
+ void __init bcm63xx_cpu_init(void);
++u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+@@ -82,6 +83,23 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_3368() \
++      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6328() \
++      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_6338() \
++      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
++#define BCMCPU_VARIANT_IS_6345() \
++      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
++#define BCMCPU_VARIANT_IS_6348() \
++      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
++#define BCMCPU_VARIANT_IS_6358() \
++      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6362() \
++      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
++#define BCMCPU_VARIANT_IS_6368() \
++      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch
new file mode 100644 (file)
index 0000000..0ffc5bd
--- /dev/null
@@ -0,0 +1,20 @@
+From 9cd8b4a2ee9d0e6a5b91845bdd6f4b7e114fc8c4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:22:41 +0100
+Subject: [PATCH 41/53] MIPS: BCM63XX: define variant id field
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -9,6 +9,8 @@
+ #define PERF_REV_REG                  0x0
+ #define REV_CHIPID_SHIFT              16
+ #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
++#define REV_VARID_SHIFT                       8
++#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT                       0
+ #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch b/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch
new file mode 100644 (file)
index 0000000..bd30b27
--- /dev/null
@@ -0,0 +1,67 @@
+From 6c8d94aaf5e2f0a3327e4f69ccd980bd5617f925 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:30:59 +0100
+Subject: [PATCH 42/53] MIPS: BCM63XX: detect bcm6328 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
+ 2 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -306,6 +306,7 @@ void __init bcm63xx_cpu_init(void)
+       struct cpuinfo_mips *c = &current_cpu_data;
+       unsigned int cpu = smp_processor_id();
+       u32 chipid_reg;
++      u8 __maybe_unused varid = 0;
+       /* soc registers location depends on cpu type */
+       chipid_reg = 0;
+@@ -345,6 +346,7 @@ void __init bcm63xx_cpu_init(void)
+       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+       bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
++      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
+       switch (bcm63xx_cpu_id) {
+       case BCM3368_CPU_ID:
+@@ -354,6 +356,14 @@ void __init bcm63xx_cpu_init(void)
+       case BCM6328_CPU_ID:
+               bcm63xx_regs_base = bcm6328_regs_base;
+               bcm63xx_irqs = bcm6328_irqs;
++
++              if (varid == 1)
++                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
++              else if (varid == 3)
++                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
++              else
++                      pr_warn("unknown BCM6328 variant: %x\n", varid);
++
+               break;
+       case BCM6338_CPU_ID:
+               bcm63xx_regs_base = bcm6338_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -11,6 +11,8 @@
+  */
+ #define BCM3368_CPU_ID                0x3368
+ #define BCM6328_CPU_ID                0x6328
++#define BCM63281_CPU_ID               0x63281
++#define BCM63283_CPU_ID               0x63283
+ #define BCM6338_CPU_ID                0x6338
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+@@ -85,8 +87,10 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+-#define BCMCPU_VARIANT_IS_6328() \
+-      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_63281() \
++      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
++#define BCMCPU_VARIANT_IS_63283() \
++      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6338() \
+       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
new file mode 100644 (file)
index 0000000..57d5b48
--- /dev/null
@@ -0,0 +1,46 @@
+From dc48adb13a99086d1f484d3379a918626c5b1658 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:33:28 +0100
+Subject: [PATCH 43/53] MIPS: BCM63XX: detect BCM6362 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 11 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -384,6 +384,14 @@ void __init bcm63xx_cpu_init(void)
+       case BCM6362_CPU_ID:
+               bcm63xx_regs_base = bcm6362_regs_base;
+               bcm63xx_irqs = bcm6362_irqs;
++
++              if (varid == 1)
++                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
++              else if (varid == 2)
++                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
++              else
++                      pr_warn("unknown BCM6362 variant: %x\n", varid);
++
+               break;
+       case BCM6368_CPU_ID:
+               bcm63xx_regs_base = bcm6368_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -17,6 +17,7 @@
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+ #define BCM6358_CPU_ID                0x6358
++#define BCM6361_CPU_ID                0x6361
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+@@ -99,6 +100,8 @@ static inline u16 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6358() \
+       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6361() \
++      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6362() \
+       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch b/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch
new file mode 100644 (file)
index 0000000..23f2ca4
--- /dev/null
@@ -0,0 +1,44 @@
+From 311b0246d51e09d13464e76abb0e231c855dd333 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:36:56 +0100
+Subject: [PATCH 44/53] MIPS: BCM63XX: add support for BCM6368 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -394,8 +394,12 @@ void __init bcm63xx_cpu_init(void)
+               break;
+       case BCM6368_CPU_ID:
++      case BCM6369_CPU_ID:
+               bcm63xx_regs_base = bcm6368_regs_base;
+               bcm63xx_irqs = bcm6368_irqs;
++
++              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
++              bcm63xx_cpu_id = BCM6368_CPU_ID;
+               break;
+       default:
+               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -20,6 +20,7 @@
+ #define BCM6361_CPU_ID                0x6361
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
++#define BCM6369_CPU_ID                0x6369
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -106,6 +107,8 @@ static inline u16 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
+       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6369() \
++      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
new file mode 100644 (file)
index 0000000..3230add
--- /dev/null
@@ -0,0 +1,20 @@
+From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:05:54 +0100
+Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -41,7 +41,7 @@
+                                       BCM_CB_MEM_SIZE - 1)
+ #define BCM_PCIE_MEM_BASE_PA          0x10f00000
+-#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
++#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
+                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
new file mode 100644 (file)
index 0000000..d6eb54d
--- /dev/null
@@ -0,0 +1,70 @@
+From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:13:06 +0100
+Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
+
+Different SoCs use different memory windows (and sizes), so don't
+hardcode it.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
+ arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
+ 2 files changed, 14 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -40,10 +40,10 @@
+ #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
+                                       BCM_CB_MEM_SIZE - 1)
+-#define BCM_PCIE_MEM_BASE_PA          0x10f00000
+-#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
+-#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
+-                                      BCM_PCIE_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
++#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
++                                      BCM_PCIE_MEM_SIZE_6328 - 1)
+ /*
+  * Internal registers are accessed through KSEG3
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
+ static struct resource bcm_pcie_mem_resource = {
+       .name   = "bcm63xx PCIe memory space",
+-      .start  = BCM_PCIE_MEM_BASE_PA,
+-      .end    = BCM_PCIE_MEM_END_PA,
++      .start  = 0,
++      .end    = 0,
+       .flags  = IORESOURCE_MEM,
+ };
+@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
+       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+       /* set bar0 to little endian */
+-      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
+-      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
++      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+       val |= BASEMASK_REMAP_EN;
+       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
++      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+       register_pci_controller(&bcm63xx_pcie_controller);
+@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
+       if (!bcm63xx_pci_enabled)
+               return -ENODEV;
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++      }
++
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
new file mode 100644 (file)
index 0000000..0ead82e
--- /dev/null
@@ -0,0 +1,56 @@
+From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:54:51 +0100
+Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 2 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
+ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+-u16 bcm63xx_cpu_id __read_mostly;
++u32 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
+ static u32 bcm63xx_cpu_variant __read_mostly;
+@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
+ static unsigned int detect_cpu_clock(void)
+ {
+-      u16 cpu_id = bcm63xx_get_cpu_id();
++      u32 cpu_id = bcm63xx_get_cpu_id();
+       switch (cpu_id) {
+       case BCM3368_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -27,7 +27,7 @@ u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+-static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
++static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
+ {
+       switch (cpu_id) {
+ #ifdef CONFIG_BCM63XX_CPU_3368
+@@ -69,11 +69,11 @@ static inline u16 __pure __bcm63xx_get_c
+       return cpu_id;
+ }
+-extern u16 bcm63xx_cpu_id;
++extern u32 bcm63xx_cpu_id;
+-static inline u16 __pure bcm63xx_get_cpu_id(void)
++static inline u32 __pure bcm63xx_get_cpu_id(void)
+ {
+-      const u16 cpu_id = bcm63xx_cpu_id;
++      const u32 cpu_id = bcm63xx_cpu_id;
+       return __bcm63xx_get_cpu_id(cpu_id);
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
new file mode 100644 (file)
index 0000000..9132e42
--- /dev/null
@@ -0,0 +1,39 @@
+From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:46:26 +0100
+Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
+
+Newer SoCs have 128 bit wide irq registers, thus 128 available internal
+interupts.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
+ arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
+@@ -1,10 +1,12 @@
+ #ifndef BCM63XX_IRQ_H_
+ #define BCM63XX_IRQ_H_
++#include <irq.h>
+ #include <bcm63xx_cpu.h>
+ #define IRQ_INTERNAL_BASE             8
+-#define IRQ_EXTERNAL_BASE             100
++#define NR_INTERNAL_IRQS              128
++#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
+ #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
+ #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
+ #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
+--- a/arch/mips/include/asm/mach-bcm63xx/irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
+@@ -1,7 +1,7 @@
+ #ifndef __ASM_MACH_BCM63XX_IRQ_H
+ #define __ASM_MACH_BCM63XX_IRQ_H
+-#define NR_IRQS 128
++#define NR_IRQS 256
+ #define MIPS_CPU_IRQ_BASE 0
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..a5bdbbd
--- /dev/null
@@ -0,0 +1,769 @@
+From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 17:14:17 +0100
+Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
+ arch/mips/bcm63xx/dev-flash.c                     |   6 +
+ arch/mips/bcm63xx/dev-spi.c                       |   4 +-
+ arch/mips/bcm63xx/irq.c                           |  20 +++-
+ arch/mips/bcm63xx/reset.c                         |  21 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 12 files changed, 342 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -60,6 +60,11 @@ config BCM63XX_CPU_6368
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++
++config BCM63XX_CPU_63268
++      bool "support 63268 CPU"
++      select SYS_HAS_CPU_BMIPS4350
++      select HW_HAS_PCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -825,7 +825,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+        */
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+               val = 0x18000000;
+       } else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk,
+                               CKCTL_6368_SWPKT_USB_EN |
+                               CKCTL_6368_SWPKT_SAR_EN,
+                               enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
+       else
+               return;
+@@ -177,6 +179,8 @@ static void usbh_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+       else
+               return;
+@@ -199,6 +203,8 @@ static void usbd_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
+       else
+               return;
+@@ -225,9 +231,13 @@ static void spi_set(struct clk *clk, int
+               mask = CKCTL_6358_SPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_SPI_EN;
+-      else
+-              /* BCMCPU_IS_6368 */
++      else if (BCMCPU_IS_6368())
+               mask = CKCTL_6368_SPI_EN;
++      else if (BCMCPU_IS_63268())
++              mask = CKCTL_63268_SPI_EN;
++      else
++              return;
++
+       bcm_hwclock_set(mask, enable);
+ }
+@@ -246,6 +256,8 @@ static void hsspi_set(struct clk *clk, i
+               mask = CKCTL_6328_HSSPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_HSSPI_EN;
++      else if (BCMCPU_IS_63268())
++              mask = CKCTL_63268_HSSPI_EN;
+       else
+               return;
+@@ -307,6 +319,8 @@ static void pcie_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+       else if (BCMCPU_IS_6362())
+               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
+ }
+ static struct clk clk_pcie = {
+@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev,
+               return &clk_periph;
+       if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
+               return &clk_pcm;
+-      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
++      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
++          !strcmp(id, "ipsec"))
+               return &clk_ipsec;
+-      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
++      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
++          !strcmp(id, "pcie"))
+               return &clk_pcie;
+       return ERR_PTR(-ENOENT);
+ }
+@@ -411,6 +427,7 @@ static int __init bcm63xx_clk_init(void)
+               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
+               break;
+       case BCM6362_CPU_ID:
++      case BCM63268_CPU_ID:
+               clk_hsspi.rate = HSSPI_PLL_HZ_6362;
+               break;
+       }
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
+ };
++static const unsigned long bcm63268_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(63268)
++};
++
++static const int bcm63268_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(63268)
++
++};
++
+ u32 bcm63xx_get_cpu_variant(void)
+ {
+       return bcm63xx_cpu_variant;
+@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
+               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
+       }
++      case BCM63268_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
++                              STRAPBUS_63268_FCVO_SHIFT;
++              switch (mips_pll_fcvo) {
++              case 0x3:
++              case 0xe:
++                      return 320000000;
++              case 0xa:
++                      return 333000000;
++              case 0x2:
++              case 0xb:
++              case 0xf:
++                      return 400000000;
++              default:
++                      return 0;
++              }
++      }
+       default:
+               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
+@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+       if (BCMCPU_IS_6345()) {
+@@ -306,6 +336,7 @@ void __init bcm63xx_cpu_init(void)
+       struct cpuinfo_mips *c = &current_cpu_data;
+       unsigned int cpu = smp_processor_id();
+       u32 chipid_reg;
++      bool long_chipid = false;
+       u8 __maybe_unused varid = 0;
+       /* soc registers location depends on cpu type */
+@@ -327,6 +358,9 @@ void __init bcm63xx_cpu_init(void)
+               case 0x10:
+                       chipid_reg = BCM_6345_PERF_BASE;
+                       break;
++              case 0x80:
++                      long_chipid = true;
++                      /* fall-through */
+               default:
+                       chipid_reg = BCM_6368_PERF_BASE;
+                       break;
+@@ -334,6 +368,7 @@ void __init bcm63xx_cpu_init(void)
+               break;
+       }
++
+       /*
+        * really early to panic, but delaying panic would not help since we
+        * will never get any working console
+@@ -343,10 +378,17 @@ void __init bcm63xx_cpu_init(void)
+       /* read out CPU type */
+       tmp = bcm_readl(chipid_reg);
+-      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+-      bcm63xx_cpu_variant = bcm63xx_cpu_id;
++
++      if (long_chipid) {
++              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
++              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
++      } else {
++              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++      }
++
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+-      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++      bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       switch (bcm63xx_cpu_id) {
+       case BCM3368_CPU_ID:
+@@ -401,6 +443,15 @@ void __init bcm63xx_cpu_init(void)
+               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
+               bcm63xx_cpu_id = BCM6368_CPU_ID;
+               break;
++      case BCM63168_CPU_ID:
++      case BCM63169_CPU_ID:
++      case BCM63268_CPU_ID:
++      case BCM63269_CPU_ID:
++              bcm63xx_regs_base = bcm63268_regs_base;
++              bcm63xx_irqs = bcm63268_irqs;
++
++              bcm63xx_cpu_id = BCM63268_CPU_ID;
++              break;
+       default:
+               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+               break;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
+               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
+                       return BCM63XX_FLASH_TYPE_PARALLEL;
+               }
++      case BCM63268_CPU_ID:
++              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
++                      return BCM63XX_FLASH_TYPE_SERIAL;
++              else
++                      return BCM63XX_FLASH_TYPE_NAND;
+       default:
+               return -EINVAL;
+       }
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
+       if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
+               bcm63xx_regs_spi = bcm6348_regs_spi;
+       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
+-              BCMCPU_IS_6362() || BCMCPU_IS_6368())
++              BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268())
+               bcm63xx_regs_spi = bcm6358_regs_spi;
+ }
+@@ -85,7 +85,7 @@ int __init bcm63xx_spi_register(void)
+       }
+       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+-              BCMCPU_IS_6368()) {
++              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
+               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+               spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+               spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -158,6 +158,7 @@ static void __internal_irq_unmask_##widt
+ BUILD_IPIC_INTERNAL(32);
+ BUILD_IPIC_INTERNAL(64);
++BUILD_IPIC_INTERNAL(128);
+ asmlinkage void plat_irq_dispatch(void)
+ {
+@@ -343,6 +344,7 @@ static int bcm63xx_external_irq_set_type
+       case BCM6358_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
++      case BCM63268_CPU_ID:
+               if (levelsense)
+                       reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+               else
+@@ -515,6 +517,18 @@ static void bcm63xx_init_irq(void)
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+               ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
+               break;
++      case BCM63268_CPU_ID:
++              irq_stat_addr[0] += PERF_IRQSTAT_63268_REG(0);
++              irq_mask_addr[0] += PERF_IRQMASK_63268_REG(0);
++              irq_stat_addr[1] += PERF_IRQSTAT_63268_REG(1);
++              irq_mask_addr[1] += PERF_IRQMASK_63268_REG(1);
++              irq_bits = 128;
++              ext_irq_count = 4;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_63268_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_63268_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_63268;
++              break;
+       default:
+               BUG();
+       }
+@@ -523,10 +537,14 @@ static void bcm63xx_init_irq(void)
+               dispatch_internal = __dispatch_internal_32;
+               internal_irq_mask = __internal_irq_mask_32;
+               internal_irq_unmask = __internal_irq_unmask_32;
+-      } else {
++      } else if (irq_bits == 64) {
+               dispatch_internal = __dispatch_internal_64;
+               internal_irq_mask = __internal_irq_mask_64;
+               internal_irq_unmask = __internal_irq_unmask_64;
++      } else {
++              dispatch_internal = __dispatch_internal_128;
++              internal_irq_mask = __internal_irq_mask_128;
++              internal_irq_unmask = __internal_irq_unmask_128;
+       }
+ }
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -125,6 +125,20 @@
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
++#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
++#define BCM63268_RESET_ENET   0
++#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
++#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
++#define BCM63268_RESET_DSL    0
++#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
++#define BCM63268_RESET_EPHY   0
++#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
++#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
++#define BCM63268_RESET_MPI    0
++#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
++                               SOFTRESET_63268_PCIE_CORE_MASK)
++#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
++
+ /*
+  * core reset bits
+  */
+@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] =
+       __GEN_RESET_BITS_TABLE(6368)
+ };
++static const u32 bcm63268_reset_bits[] = {
++      __GEN_RESET_BITS_TABLE(63268)
++};
++
+ const u32 *bcm63xx_reset_bits;
+ static int reset_reg;
+@@ -182,6 +200,9 @@ static int __init bcm63xx_reset_bits_ini
+       } else if (BCMCPU_IS_6368()) {
+               reset_reg = PERF_SOFTRESET_6368_REG;
+               bcm63xx_reset_bits = bcm6368_reset_bits;
++      } else if (BCMCPU_IS_63268()) {
++              reset_reg = PERF_SOFTRESET_63268_REG;
++              bcm63xx_reset_bits = bcm63268_reset_bits;
+       }
+       return 0;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -21,6 +21,10 @@
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+ #define BCM6369_CPU_ID                0x6369
++#define BCM63168_CPU_ID               0x63168
++#define BCM63169_CPU_ID               0x63169
++#define BCM63268_CPU_ID               0x63268
++#define BCM63269_CPU_ID               0x63269
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -61,6 +65,10 @@ static inline u32 __pure __bcm63xx_get_c
+ #ifdef CONFIG_BCM63XX_CPU_6368
+               case BCM6368_CPU_ID:
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_63268
++              case BCM63268_CPU_ID:
++#endif
+               break;
+       default:
+               unreachable();
+@@ -86,6 +94,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+ #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+@@ -109,6 +118,14 @@ static inline u32 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6369() \
+       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
++#define BCMCPU_VARIANT_IS_63168() \
++      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
++#define BCMCPU_VARIANT_IS_63169() \
++      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
++#define BCMCPU_VARIANT_IS_63268() \
++      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
++#define BCMCPU_VARIANT_IS_63269() \
++      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+@@ -573,6 +590,52 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_RNG_BASE             (0xb0004180)
+ #define BCM_6368_MISC_BASE            (0xdeadbeef)
++/*
++ * 63268 register sets base address
++ */
++#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
++#define BCM_63268_PERF_BASE           (0xb0000000)
++#define BCM_63268_TIMER_BASE          (0xb0000080)
++#define BCM_63268_WDT_BASE            (0xb000009c)
++#define BCM_63268_UART0_BASE          (0xb0000180)
++#define BCM_63268_UART1_BASE          (0xb00001a0)
++#define BCM_63268_GPIO_BASE           (0xb00000c0)
++#define BCM_63268_SPI_BASE            (0xb0000800)
++#define BCM_63268_HSSPI_BASE          (0xb0001000)
++#define BCM_63268_UDC0_BASE           (0xdeadbeef)
++#define BCM_63268_USBDMA_BASE         (0xb000c800)
++#define BCM_63268_OHCI0_BASE          (0xb0002600)
++#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
++#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
++#define BCM_63268_USBD_BASE           (0xb0002400)
++#define BCM_63268_MPI_BASE            (0xdeadbeef)
++#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
++#define BCM_63268_PCIE_BASE           (0xb06e0000)
++#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
++#define BCM_63268_DSL_BASE            (0xdeadbeef)
++#define BCM_63268_UBUS_BASE           (0xdeadbeef)
++#define BCM_63268_ENET0_BASE          (0xdeadbeef)
++#define BCM_63268_ENET1_BASE          (0xdeadbeef)
++#define BCM_63268_ENETDMA_BASE                (0xb000d800)
++#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
++#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
++#define BCM_63268_ENETSW_BASE         (0xb0700000)
++#define BCM_63268_EHCI0_BASE          (0xb0002500)
++#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
++#define BCM_63268_MEMC_BASE           (0xdeadbeef)
++#define BCM_63268_DDR_BASE            (0xb0003000)
++#define BCM_63268_M2M_BASE            (0xdeadbeef)
++#define BCM_63268_ATM_BASE            (0xdeadbeef)
++#define BCM_63268_XTM_BASE            (0xb0007000)
++#define BCM_63268_XTMDMA_BASE         (0xb000b800)
++#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
++#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
++#define BCM_63268_PCM_BASE            (0xb000b000)
++#define BCM_63268_PCMDMA_BASE         (0xb000b800)
++#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
++#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
++#define BCM_63268_RNG_BASE            (0xdeadbeef)
++#define BCM_63268_MISC_BASE           (0xb0001800)
+ extern const unsigned long *bcm63xx_regs_base;
+@@ -1084,6 +1147,73 @@ enum bcm63xx_irq {
+ #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
+ #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
++/*
++ * 63268 irqs
++ */
++#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
++#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
++
++#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
++#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
++#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
++#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
++#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
++#define BCM_63268_UDC0_IRQ            0
++#define BCM_63268_ENET0_IRQ           0
++#define BCM_63268_ENET1_IRQ           0
++#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
++#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
++#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
++#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
++#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
++#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
++#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
++#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
++#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
++#define BCM_63268_PCMCIA_IRQ          0
++#define BCM_63268_ENET0_RXDMA_IRQ     0
++#define BCM_63268_ENET0_TXDMA_IRQ     0
++#define BCM_63268_ENET1_RXDMA_IRQ     0
++#define BCM_63268_ENET1_TXDMA_IRQ     0
++#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
++#define BCM_63268_ATM_IRQ             0
++#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
++#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
++#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
++#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
++#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
++#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
++#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
++#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
++#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
++#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
++
++#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
++#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
++#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
++#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
++#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
++#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
++#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
++#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
++#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
++#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
++#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
++#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
++#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
++#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
++#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
++#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
++#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
++#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
++#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
++#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
++#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
++
+ extern const int *bcm63xx_irqs;
+ #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -22,6 +22,8 @@ static inline unsigned long bcm63xx_gpio
+               return 48;
+       case BCM6368_CPU_ID:
+               return 38;
++      case BCM63268_CPU_ID:
++              return 52;
+       case BCM6348_CPU_ID:
+       default:
+               return 37;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -9,6 +9,8 @@
+ #define PERF_REV_REG                  0x0
+ #define REV_CHIPID_SHIFT              16
+ #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
++#define REV_LONG_CHIPID_SHIFT         12
++#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
+ #define REV_VARID_SHIFT                       8
+ #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT                       0
+@@ -211,6 +213,52 @@
+                                       CKCTL_6368_NAND_EN |            \
+                                       CKCTL_6368_IPSEC_EN)
++#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
++#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
++#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
++#define CKCTL_63268_VDSL_EN           (1 << 3)
++#define CKCTL_63268_MIPS_EN           (1 << 4)
++#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
++#define CKCTL_63268_DECT_EN           (1 << 6)
++#define CKCTL_63268_FAP0_EN           (1 << 7)
++#define CKCTL_63268_FAP1_EN           (1 << 8)
++#define CKCTL_63268_SAR_EN            (1 << 9)
++#define CKCTL_63268_ROBOSW_EN         (1 << 10)
++#define CKCTL_63268_PCM_EN            (1 << 11)
++#define CKCTL_63268_USBD_EN           (1 << 12)
++#define CKCTL_63268_USBH_EN           (1 << 13)
++#define CKCTL_63268_IPSEC_EN          (1 << 14)
++#define CKCTL_63268_SPI_EN            (1 << 15)
++#define CKCTL_63268_HSSPI_EN          (1 << 16)
++#define CKCTL_63268_PCIE_EN           (1 << 17)
++#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
++#define CKCTL_63268_GMAC_EN           (1 << 19)
++#define CKCTL_63268_NAND_EN           (1 << 20)
++#define CKCTL_63268_TBUS_EN           (1 << 27)
++#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
++
++#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
++                                      CKCTL_63268_VDSL_AFE_EN |       \
++                                      CKCTL_63268_VDSL_EN |           \
++                                      CKCTL_63268_WLAN_OCP_EN |       \
++                                      CKCTL_63268_DECT_EN |           \
++                                      CKCTL_63268_FAP0_EN |           \
++                                      CKCTL_63268_FAP1_EN |           \
++                                      CKCTL_63268_SAR_EN |            \
++                                      CKCTL_63268_ROBOSW_EN |         \
++                                      CKCTL_63268_PCM_EN |            \
++                                      CKCTL_63268_USBD_EN |           \
++                                      CKCTL_63268_USBH_EN |           \
++                                      CKCTL_63268_IPSEC_EN |          \
++                                      CKCTL_63268_SPI_EN |            \
++                                      CKCTL_63268_HSSPI_EN |          \
++                                      CKCTL_63268_PCIE_EN |           \
++                                      CKCTL_63268_PHYMIPS_EN |        \
++                                      CKCTL_63268_GMAC_EN |           \
++                                      CKCTL_63268_NAND_EN |           \
++                                      CKCTL_63268_TBUS_EN |           \
++                                      CKCTL_63268_ROBOSW250_EN)
++
+ /* System PLL Control register        */
+ #define PERF_SYS_PLL_CTL_REG          0x8
+ #define SYS_PLL_SOFT_RESET            0x1
+@@ -224,6 +272,7 @@
+ #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
+ #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
++#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
+@@ -234,6 +283,7 @@
+ #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
+ #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
++#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
+@@ -244,6 +294,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6358      0x14
+ #define PERF_EXTIRQ_CFG_REG_6362      0x18
+ #define PERF_EXTIRQ_CFG_REG_6368      0x18
++#define PERF_EXTIRQ_CFG_REG_63268     0x18
+ #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
+@@ -273,6 +324,7 @@
+ #define PERF_SOFTRESET_6358_REG               0x34
+ #define PERF_SOFTRESET_6362_REG               0x10
+ #define PERF_SOFTRESET_6368_REG               0x10
++#define PERF_SOFTRESET_63268_REG      0x10
+ #define SOFTRESET_3368_SPI_MASK               (1 << 0)
+ #define SOFTRESET_3368_ENET_MASK      (1 << 2)
+@@ -366,6 +418,26 @@
+ #define SOFTRESET_6368_USBH_MASK      (1 << 12)
+ #define SOFTRESET_6368_PCM_MASK               (1 << 13)
++#define SOFTRESET_63268_SPI_MASK      (1 << 0)
++#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
++#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
++#define SOFTRESET_63268_SAR_MASK      (1 << 3)
++#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
++#define SOFTRESET_63268_USBS_MASK     (1 << 5)
++#define SOFTRESET_63268_USBH_MASK     (1 << 6)
++#define SOFTRESET_63268_PCM_MASK      (1 << 7)
++#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
++#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
++#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
++#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
++#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
++#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
++#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
++#define SOFTRESET_63268_DECT_MASK     (1 << 15)
++#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
++#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
++#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
++
+ /* MIPS PLL control register */
+ #define PERF_MIPSPLLCTL_REG           0x34
+ #define MIPSPLLCTL_N1_SHIFT           20
+@@ -1379,6 +1451,13 @@
+ #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
+ #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
++#define MISC_STRAPBUS_63268_REG               0x14
++#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
++#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
++#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
++#define STRAPBUS_63268_FCVO_SHIFT     21
++#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -25,6 +25,7 @@ static inline int is_bcm63xx_internal_re
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
++      case BCM63268_CPU_ID:
+               if (offset >= 0xb0000000 && offset < 0xb1000000)
+                       return 1;
+               break;
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -176,7 +176,8 @@ static int __init register_shared(void)
+       else
+               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++              BCMCPU_IS_63268())
+               chan_count = 32;
+       else if (BCMCPU_IS_6345())
+               chan_count = 8;
+@@ -276,7 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
++              !BCMCPU_IS_63268())
+               return -ENODEV;
+       ret = register_shared();
+@@ -295,8 +297,11 @@ bcm63xx_enetsw_register(const struct bcm
+       if (BCMCPU_IS_6328())
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
+-      else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
++      else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++               BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
+               enetsw_pd.num_ports = ENETSW_PORTS_6368;
++      else if (BCMCPU_VARIANT_IS_63268() ||  BCMCPU_VARIANT_IS_63269())
++              enetsw_pd.num_ports = ENETSW_PORTS_63268;
+       enetsw_pd.dma_has_sram = true;
+       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -62,6 +62,7 @@ struct bcm63xx_enet_platform_data {
+ #define ENETSW_MAX_PORT       8
+ #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
+ #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
++#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
+ #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..4e8a090
--- /dev/null
@@ -0,0 +1,55 @@
+From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:22:40 +0100
+Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
+
+---
+ arch/mips/bcm63xx/reset.c                       | 3 ++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
+ arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
+ 3 files changed, 11 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -136,7 +136,8 @@
+ #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI    0
+ #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
+-                               SOFTRESET_63268_PCIE_CORE_MASK)
++                               SOFTRESET_63268_PCIE_CORE_MASK | \
++                               SOFTRESET_63268_PCIE_HARD_MASK)
+ #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -45,6 +45,11 @@
+ #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
+                                       BCM_PCIE_MEM_SIZE_6328 - 1)
++#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
++#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
++                                      BCM_PCIE_MEM_SIZE_63268 - 1)
++
+ /*
+  * Internal registers are accessed through KSEG3
+  */
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
+       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++      } else if (BCMCPU_IS_63268()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
+       }
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
++      case BCM63268_CPU_ID:
+               return bcm63xx_register_pcie();
+       case BCM3368_CPU_ID:
+       case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..c7a2225
--- /dev/null
@@ -0,0 +1,672 @@
+From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 01:24:09 +0100
+Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
+
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |   8 +-
+ arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
+ arch/mips/bcm63xx/dev-flash.c                     |   3 +
+ arch/mips/bcm63xx/dev-spi.c                       |   2 +-
+ arch/mips/bcm63xx/irq.c                           |  10 ++
+ arch/mips/bcm63xx/prom.c                          |   2 +-
+ arch/mips/bcm63xx/reset.c                         |  24 +++++
+ arch/mips/bcm63xx/setup.c                         |   5 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 13 files changed, 291 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -18,6 +18,11 @@ config BCM63XX_EHCI
+       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
+       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++config BCM63XX_CPU_6318
++      bool "support 6318 CPU"
++      select SYS_HAS_CPU_BMIPS32_3300
++      select HW_HAS_PCI
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -825,7 +825,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+        */
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+               val = 0x18000000;
+       } else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -252,7 +252,9 @@ static void hsspi_set(struct clk *clk, i
+ {
+       u32 mask;
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318())
++              mask = CKCTL_6318_HSSPI_EN;
++      else if (BCMCPU_IS_6328())
+               mask = CKCTL_6328_HSSPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_HSSPI_EN;
+@@ -417,12 +419,16 @@ void clk_put(struct clk *clk)
+ EXPORT_SYMBOL(clk_put);
++#define HSSPI_PLL_HZ_6318     250000000
+ #define HSSPI_PLL_HZ_6328     133333333
+ #define HSSPI_PLL_HZ_6362     400000000
+ static int __init bcm63xx_clk_init(void)
+ {
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              clk_hsspi.rate = HSSPI_PLL_HZ_6318;
++              break;
+       case BCM6328_CPU_ID:
+               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
+               break;
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
+       __GEN_CPU_IRQ_TABLE(3368)
+ };
++static const unsigned long bcm6318_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(6318)
++};
++
++static const int bcm6318_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(6318)
++};
++
+ static const unsigned long bcm6328_regs_base[] = {
+       __GEN_CPU_REGS_TABLE(6328)
+ };
+@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
+       return bcm63xx_memory_size;
+ }
++#define STRAP_OVERRIDE_BUS_REG                0x0
++#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
++#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
++
+ static unsigned int detect_cpu_clock(void)
+ {
+       u32 cpu_id = bcm63xx_get_cpu_id();
+@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
+       case BCM3368_CPU_ID:
+               return 300000000;
++      case BCM6318_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
++
++              pr_info("strap_override_bus = %08x\n", tmp);
++
++              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
++                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
++
++              switch (mips_pll_fcvo) {
++              case 0:
++                      return 166000000;
++              case 1:
++                      return 400000000;
++              case 2:
++                      return 250000000;
++              case 3:
++                      return 333000000;
++              };
++      }
+       case BCM6328_CPU_ID:
+       {
+               unsigned int tmp, mips_pll_fcvo;
+@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
++      if (BCMCPU_IS_6318()) {
++              val = bcm_sdram_readl(SDRAM_CFG_REG);
++              val = val & SDRAM_CFG_6318_SPACE_MASK;
++              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
++              return 1 << (val + 20);
++      }
++
+       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+@@ -344,6 +385,12 @@ void __init bcm63xx_cpu_init(void)
+       switch (c->cputype) {
+       case CPU_BMIPS3300:
++              if ((read_c0_prid() & 0xff) >= 0x33) {
++                      /* BCM6318 */
++                      chipid_reg = BCM_6368_PERF_BASE;
++                      break;
++              }
++
+               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
+                       __cpu_name[cpu] = "Broadcom BCM6338";
+               /* fall-through */
+@@ -391,6 +438,10 @@ void __init bcm63xx_cpu_init(void)
+       bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       switch (bcm63xx_cpu_id) {
++      case BCM6318_CPU_ID:
++              bcm63xx_regs_base = bcm6318_regs_base;
++              bcm63xx_irqs = bcm6318_irqs;
++              break;
+       case BCM3368_CPU_ID:
+               bcm63xx_regs_base = bcm3368_regs_base;
+               bcm63xx_irqs = bcm3368_irqs;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
+       u32 val;
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              /* only support serial flash */
++              return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6328_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -70,7 +70,7 @@ static struct platform_device bcm63xx_sp
+ int __init bcm63xx_spi_register(void)
+ {
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -441,6 +441,16 @@ static void bcm63xx_init_irq(void)
+               ext_irq_count = 4;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+               break;
++      case BCM6318_CPU_ID:
++              irq_stat_addr[0] += PERF_IRQSTAT_6318_REG;
++              irq_mask_addr[0] += PERF_IRQMASK_6318_REG;
++              irq_bits = 128;
++              ext_irq_count = 4;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_6318_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_6318_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6318;
++              break;
+       case BCM6328_CPU_ID:
+               irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+               irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -72,7 +72,7 @@ void __init prom_init(void)
+                       if (reg & OTP_6328_REG3_TP1_DISABLED)
+                               bmips_smp_enabled = 0;
+-              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
++              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
+                       bmips_smp_enabled = 0;
+               }
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -43,6 +43,23 @@
+ #define BCM3368_RESET_PCIE    0
+ #define BCM3368_RESET_PCIE_EXT        0
++
++#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
++#define BCM6318_RESET_ENET    0
++#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
++#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
++#define BCM6318_RESET_DSL     0
++#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
++#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
++#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
++#define BCM6318_RESET_PCM     0
++#define BCM6318_RESET_MPI     0
++#define BCM6318_RESET_PCIE    \
++                              (SOFTRESET_6318_PCIE_MASK |             \
++                               SOFTRESET_6318_PCIE_CORE_MASK |        \
++                               SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
++
+ #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET    0
+ #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
+@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] =
+       __GEN_RESET_BITS_TABLE(3368)
+ };
++static const u32 bcm6318_reset_bits[] = {
++      __GEN_RESET_BITS_TABLE(6318)
++};
++
+ static const u32 bcm6328_reset_bits[] = {
+       __GEN_RESET_BITS_TABLE(6328)
+ };
+@@ -183,6 +204,9 @@ static int __init bcm63xx_reset_bits_ini
+       if (BCMCPU_IS_3368()) {
+               reset_reg = PERF_SOFTRESET_6358_REG;
+               bcm63xx_reset_bits = bcm3368_reset_bits;
++      } else if (BCMCPU_IS_6318()) {
++              reset_reg = PERF_SOFTRESET_6318_REG;
++              bcm63xx_reset_bits = bcm6318_reset_bits;
+       } else if (BCMCPU_IS_6328()) {
+               reset_reg = PERF_SOFTRESET_6328_REG;
+               bcm63xx_reset_bits = bcm6328_reset_bits;
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -71,6 +71,9 @@ void bcm63xx_machine_reboot(void)
+       case BCM3368_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+               break;
++      case BCM6318_CPU_ID:
++              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
++              break;
+       case BCM6328_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+               break;
+@@ -110,7 +113,7 @@ void bcm63xx_machine_reboot(void)
+               bcm6348_a1_reboot();
+       printk(KERN_INFO "triggering watchdog soft-reset...\n");
+-      if (BCMCPU_IS_6328()) {
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
+               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+       } else {
+               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -10,6 +10,7 @@
+  * arm mach-types)
+  */
+ #define BCM3368_CPU_ID                0x3368
++#define BCM6318_CPU_ID                0x6318
+ #define BCM6328_CPU_ID                0x6328
+ #define BCM63281_CPU_ID               0x63281
+ #define BCM63283_CPU_ID               0x63283
+@@ -38,6 +39,10 @@ static inline u32 __pure __bcm63xx_get_c
+               case BCM3368_CPU_ID:
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++              case BCM6318_CPU_ID:
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6328
+               case BCM6328_CPU_ID:
+ #endif
+@@ -87,6 +92,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ }
+ #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
++#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
+ #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+ #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+ #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+@@ -98,6 +104,8 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6318() \
++      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63281() \
+       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63283() \
+@@ -252,6 +260,56 @@ enum bcm63xx_regs_set {
+ #define BCM_3368_MISC_BASE            (0xdeadbeef)
+ /*
++ * 6318 register sets base address
++ */
++#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
++#define BCM_6318_PERF_BASE            (0xb0000000)
++#define BCM_6318_TIMER_BASE           (0xb0000040)
++#define BCM_6318_WDT_BASE             (0xb0000068)
++#define BCM_6318_UART0_BASE           (0xb0000100)
++#define BCM_6318_UART1_BASE           (0xdeadbeef)
++#define BCM_6318_GPIO_BASE            (0xb0000080)
++#define BCM_6318_SPI_BASE             (0xdeadbeef)
++#define BCM_6318_HSSPI_BASE           (0xb0003000)
++#define BCM_6318_UDC0_BASE            (0xdeadbeef)
++#define BCM_6318_USBDMA_BASE          (0xb0006800)
++#define BCM_6318_OHCI0_BASE           (0xb0005100)
++#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
++#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
++#define BCM_6318_USBD_BASE            (0xb0006000)
++#define BCM_6318_MPI_BASE             (0xdeadbeef)
++#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
++#define BCM_6318_PCIE_BASE            (0xb0010000)
++#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
++#define BCM_6318_DSL_BASE             (0xdeadbeef)
++#define BCM_6318_UBUS_BASE            (0xdeadbeef)
++#define BCM_6318_ENET0_BASE           (0xdeadbeef)
++#define BCM_6318_ENET1_BASE           (0xdeadbeef)
++#define BCM_6318_ENETDMA_BASE         (0xb0088000)
++#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
++#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
++#define BCM_6318_ENETSW_BASE          (0xb0080000)
++#define BCM_6318_EHCI0_BASE           (0xb0005000)
++#define BCM_6318_SDRAM_BASE           (0xb0004000)
++#define BCM_6318_MEMC_BASE            (0xdeadbeef)
++#define BCM_6318_DDR_BASE             (0xdeadbeef)
++#define BCM_6318_M2M_BASE             (0xdeadbeef)
++#define BCM_6318_ATM_BASE             (0xdeadbeef)
++#define BCM_6318_XTM_BASE             (0xdeadbeef)
++#define BCM_6318_XTMDMA_BASE          (0xb000c000)
++#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
++#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
++#define BCM_6318_PCM_BASE             (0xdeadbeef)
++#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
++#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
++#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
++#define BCM_6318_RNG_BASE             (0xdeadbeef)
++#define BCM_6318_MISC_BASE            (0xb0000280)
++#define BCM_6318_OTP_BASE             (0xdeadbeef)
++
++#define BCM_6318_STRAP_BASE           (0xb0000900)
++
++/*
+  * 6328 register sets base address
+  */
+ #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
+@@ -819,6 +877,55 @@ enum bcm63xx_irq {
+ #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
+ #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
++/*
++ * 6318 irqs
++ */
++#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
++#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
++
++#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
++#define BCM_6318_SPI_IRQ              0
++#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
++#define BCM_6318_UART1_IRQ            0
++#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
++#define BCM_6318_UDC0_IRQ             0
++#define BCM_6318_ENET0_IRQ            0
++#define BCM_6318_ENET1_IRQ            0
++#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
++#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
++#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
++#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
++#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
++#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
++#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
++#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
++#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
++#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
++#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
++#define BCM_6318_PCMCIA_IRQ           0
++#define BCM_6318_ENET0_RXDMA_IRQ      0
++#define BCM_6318_ENET0_TXDMA_IRQ      0
++#define BCM_6318_ENET1_RXDMA_IRQ      0
++#define BCM_6318_ENET1_TXDMA_IRQ      0
++#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
++#define BCM_6318_ATM_IRQ              0
++#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
++#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
++#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
++#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
++#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
++#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
++#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
++#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
++#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
++#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
++
++#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
++#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
++#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
++#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
++#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
++#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
+ /*
+  * 6328 irqs
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -52,6 +52,39 @@
+                                        CKCTL_3368_EMUSB_EN | \
+                                        CKCTL_3368_USBU_EN)
++#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
++#define CKCTL_6318_USB_ASB_EN         (1 << 1)
++#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
++#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
++#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
++#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
++#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
++#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
++#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
++#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
++#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
++#define CKCTL_6318_ADSL_EN            (1 << 11)
++#define CKCTL_6318_SAR125_EN          (1 << 12)
++#define CKCTL_6318_MIPS_EN            (1 << 13)
++#define CKCTL_6318_PCIE_EN            (1 << 14)
++#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
++#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
++#define CKCTL_6318_SDR_EN             (1 << 19)
++#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
++#define CKCTL_6318_HSSPI_EN           (1 << 25)
++#define CKCTL_6318_PCIE25_EN          (1 << 27)
++#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
++#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
++#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
++
++#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
++                                      CKCTL_6318_ADSL_QPROC_EN |      \
++                                      CKCTL_6318_ADSL_AFE_EN |        \
++                                      CKCTL_6318_ADSL_EN |            \
++                                      CKCTL_6318_SAR_EN  |            \
++                                      CKCTL_6318_USB_EN |             \
++                                      CKCTL_6318_PCIE_EN)
++
+ #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
+ #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
+ #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
+@@ -259,12 +292,27 @@
+                                       CKCTL_63268_TBUS_EN |           \
+                                       CKCTL_63268_ROBOSW250_EN)
++/* UBUS Clock Control register */
++#define PERF_UB_CKCTL_REG             0x10
++
++#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
++#define UB_CKCTL_6318_ARB_EN          (1 << 1)
++#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
++#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
++#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
++#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
++#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
++#define UB_CKCTL_6318_SAR_EN          (1 << 7)
++#define UB_CKCTL_6318_SDR_EN          (1 << 8)
++#define UB_CKCTL_6318_USB_EN          (1 << 9)
++
+ /* System PLL Control register        */
+ #define PERF_SYS_PLL_CTL_REG          0x8
+ #define SYS_PLL_SOFT_RESET            0x1
+ /* Interrupt Mask register */
+ #define PERF_IRQMASK_3368_REG         0xc
++#define PERF_IRQMASK_6318_REG         0x20
+ #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6338_REG         0xc
+ #define PERF_IRQMASK_6345_REG         0xc
+@@ -276,6 +324,7 @@
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
++#define PERF_IRQSTAT_6318_REG         0x30
+ #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6338_REG         0x10
+ #define PERF_IRQSTAT_6345_REG         0x10
+@@ -287,6 +336,7 @@
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
++#define PERF_EXTIRQ_CFG_REG_6318      0x18
+ #define PERF_EXTIRQ_CFG_REG_6328      0x18
+ #define PERF_EXTIRQ_CFG_REG_6338      0x14
+ #define PERF_EXTIRQ_CFG_REG_6345      0x14
+@@ -320,6 +370,7 @@
+ /* Soft Reset register */
+ #define PERF_SOFTRESET_REG            0x28
++#define PERF_SOFTRESET_6318_REG               0x10
+ #define PERF_SOFTRESET_6328_REG               0x10
+ #define PERF_SOFTRESET_6358_REG               0x34
+ #define PERF_SOFTRESET_6362_REG               0x10
+@@ -333,6 +384,18 @@
+ #define SOFTRESET_3368_USBS_MASK      (1 << 11)
+ #define SOFTRESET_3368_PCM_MASK               (1 << 13)
++#define SOFTRESET_6318_SPI_MASK               (1 << 0)
++#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
++#define SOFTRESET_6318_SAR_MASK               (1 << 2)
++#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
++#define SOFTRESET_6318_USBS_MASK      (1 << 4)
++#define SOFTRESET_6318_USBH_MASK      (1 << 5)
++#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
++#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
++#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
++#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
++#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
++
+ #define SOFTRESET_6328_SPI_MASK               (1 << 0)
+ #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
+ #define SOFTRESET_6328_SAR_MASK               (1 << 2)
+@@ -504,8 +567,17 @@
+ #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
+ #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
++#define TIMER_IRQMASK_6318_REG                0x0
++#define TIMER_IRQSTAT_6318_REG                0x4
++#define IRQSTATMASK_TIMER0            (1 << 0)
++#define IRQSTATMASK_TIMER1            (1 << 1)
++#define IRQSTATMASK_TIMER2            (1 << 2)
++#define IRQSTATMASK_TIMER3            (1 << 3)
++#define IRQSTATMASK_WDT                       (1 << 4)
++
+ /* Timer control register */
+ #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
++#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
+ #define TIMER_CTL0_REG                        0x4
+ #define TIMER_CTL1_REG                        0x8
+ #define TIMER_CTL2_REG                        0xC
+@@ -1252,6 +1324,8 @@
+ #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
+ #define SDRAM_CFG_BANK_SHIFT          13
+ #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
++#define SDRAM_CFG_6318_SPACE_SHIFT    4
++#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
+ #define SDRAM_MBASE_REG                       0xc
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -22,6 +22,7 @@ static inline int is_bcm63xx_internal_re
+               if (offset >= 0xfff00000)
+                       return 1;
+               break;
++      case BCM6318_CPU_ID:
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++              !BCMCPU_IS_63268())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-usb-usbd.c
++++ b/arch/mips/bcm63xx/dev-usb-usbd.c
+@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
+               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
+       int i;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+               return 0;
+       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -176,8 +176,8 @@ static int __init register_shared(void)
+       else
+               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
+-              BCMCPU_IS_63268())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++              BCMCPU_IS_6368() || BCMCPU_IS_63268())
+               chan_count = 32;
+       else if (BCMCPU_IS_6345())
+               chan_count = 8;
+@@ -277,8 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
+-              !BCMCPU_IS_63268())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return -ENODEV;
+       ret = register_shared();
+@@ -295,7 +295,7 @@ bcm63xx_enetsw_register(const struct bcm
+       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
+       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
+                BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              return 50;
+       case BCM6328_CPU_ID:
+               return 32;
+       case BCM3368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
++              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
new file mode 100644 (file)
index 0000000..71044f8
--- /dev/null
@@ -0,0 +1,156 @@
+From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 14:17:50 +0100
+Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
+
+---
+ arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
+ arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
+ 3 files changed, 34 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -28,7 +28,9 @@
+       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
+       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
+       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
+-      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
++      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
++      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
++      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
+ #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
+ #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
+@@ -42,6 +44,8 @@
+ #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
+ #define BCM3368_RESET_PCIE    0
+ #define BCM3368_RESET_PCIE_EXT        0
++#define BCM3368_RESET_PCIE_CORE       0
++#define BCM3368_RESET_PCIE_HARD       0
+ #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
+@@ -54,11 +58,10 @@
+ #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
+ #define BCM6318_RESET_PCM     0
+ #define BCM6318_RESET_MPI     0
+-#define BCM6318_RESET_PCIE    \
+-                              (SOFTRESET_6318_PCIE_MASK |             \
+-                               SOFTRESET_6318_PCIE_CORE_MASK |        \
+-                               SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
+ #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
++#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
++#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
+ #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET    0
+@@ -70,11 +73,10 @@
+ #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
+ #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
+ #define BCM6328_RESET_MPI     0
+-#define BCM6328_RESET_PCIE    \
+-                              (SOFTRESET_6328_PCIE_MASK |             \
+-                               SOFTRESET_6328_PCIE_CORE_MASK |        \
+-                               SOFTRESET_6328_PCIE_HARD_MASK)
++#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
+ #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
++#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
++#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
+ #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
+ #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
+@@ -88,6 +90,8 @@
+ #define BCM6338_RESET_MPI     0
+ #define BCM6338_RESET_PCIE    0
+ #define BCM6338_RESET_PCIE_EXT        0
++#define BCM6338_RESET_PCIE_CORE       0
++#define BCM6338_RESET_PCIE_HARD       0
+ #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
+ #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
+@@ -101,6 +105,8 @@
+ #define BCM6348_RESET_MPI     0
+ #define BCM6348_RESET_PCIE    0
+ #define BCM6348_RESET_PCIE_EXT        0
++#define BCM6348_RESET_PCIE_CORE       0
++#define BCM6348_RESET_PCIE_HARD       0
+ #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
+ #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
+@@ -114,6 +120,8 @@
+ #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
+ #define BCM6358_RESET_PCIE    0
+ #define BCM6358_RESET_PCIE_EXT        0
++#define BCM6358_RESET_PCIE_CORE       0
++#define BCM6358_RESET_PCIE_HARD       0
+ #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
+ #define BCM6362_RESET_ENET    0
+@@ -125,9 +133,10 @@
+ #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
+ #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
+ #define BCM6362_RESET_MPI     0
+-#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
+-                               SOFTRESET_6362_PCIE_CORE_MASK)
++#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
+ #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
++#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
++#define BCM6362_RESET_PCIE_HARD       0
+ #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
+ #define BCM6368_RESET_ENET    0
+@@ -141,6 +150,8 @@
+ #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
++#define BCM6368_RESET_PCIE_CORE       0
++#define BCM6368_RESET_PCIE_HARD       0
+ #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
+ #define BCM63268_RESET_ENET   0
+@@ -152,10 +163,10 @@
+ #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
+ #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI    0
+-#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
+-                               SOFTRESET_63268_PCIE_CORE_MASK | \
+-                               SOFTRESET_63268_PCIE_HARD_MASK)
++#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
+ #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
++#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
++#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
+ /*
+  * core reset bits
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
+@@ -14,6 +14,8 @@ enum bcm63xx_core_reset {
+       BCM63XX_RESET_MPI,
+       BCM63XX_RESET_PCIE,
+       BCM63XX_RESET_PCIE_EXT,
++      BCM63XX_RESET_PCIE_CORE,
++      BCM63XX_RESET_PCIE_HARD,
+ };
+ void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
+       /* reset the PCIe core */
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
++              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
++              mdelay(10);
++              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
++      }
+       mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
+       mdelay(10);
diff --git a/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..3ba3357
--- /dev/null
@@ -0,0 +1,342 @@
+From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:47:34 +0100
+Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
+
+---
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
+ arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
+ arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
+ 5 files changed, 184 insertions(+), 29 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -50,6 +50,18 @@ static void bcm_hwclock_set(u32 mask, in
+       bcm_perf_writel(reg, PERF_CKCTL_REG);
+ }
++static void bcm_ub_hwclock_set(u32 mask, int enable)
++{
++      u32 reg;
++
++      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
++      if (enable)
++              reg |= mask;
++      else
++              reg &= ~mask;
++      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -317,12 +329,17 @@ static struct clk clk_ipsec = {
+ static void pcie_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
++              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
+-      else if (BCMCPU_IS_63268())
++      } else if (BCMCPU_IS_63268()) {
+               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
++      }
+ }
+ static struct clk clk_pcie = {
+@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev,
+       if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
+           !strcmp(id, "ipsec"))
+               return &clk_ipsec;
+-      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
++      if ((BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
+           !strcmp(id, "pcie"))
+               return &clk_pcie;
+       return ERR_PTR(-ENOENT);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -40,6 +40,12 @@
+ #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
+                                       BCM_CB_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
++#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
++                                      BCM_PCIE_MEM_SIZE_6318 - 1)
++
++
+ #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
+ #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1542,6 +1542,17 @@
+  * _REG relative to RSET_PCIE
+  *************************************************************************/
++#define PCIE_SPECIFIC_REG             0x188
++#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
++#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
++#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
++#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
++#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
++#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
++
+ #define PCIE_CONFIG2_REG              0x408
+ #define CONFIG2_BAR1_SIZE_EN          1
+ #define CONFIG2_BAR1_SIZE_MASK                0xf
+@@ -1587,7 +1598,54 @@
+ #define PCIE_RC_INT_C                 (1 << 2)
+ #define PCIE_RC_INT_D                 (1 << 3)
+-#define PCIE_DEVICE_OFFSET            0x8000
++#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
++#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
++#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
++#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
++#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
++#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
++#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
++
++#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
++#define RC_BAR_CFG_LO_SIZE_256MB      0xd
++#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
++#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
++
++#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
++#define C2P_BASELIMIT_LIMIT_SHIFT     20
++#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
++#define C2P_BASELIMIT_BASE_SHIFT      4
++#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
++
++#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
++#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
++#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
++#define BAR1_CFG_REMAP_ACCESS_EN      1
++
++#define PCIE_HARD_DEBUG_REG           0x4204
++#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
++
++#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
++#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
++#define CPU_INT_PCIE_INTA             (1 << 1)
++#define CPU_INT_PCIE_INTB             (1 << 2)
++#define CPU_INT_PCIE_INTC             (1 << 3)
++#define CPU_INT_PCIE_INTD             (1 << 4)
++#define CPU_INT_PCIE_INTR             (1 << 5)
++#define CPU_INT_PCIE_NMI              (1 << 6)
++#define CPU_INT_PCIE_UBUS             (1 << 7)
++#define CPU_INT_IPI                   (1 << 8)
++
++#define PCIE_EXT_CFG_INDEX_REG                0x8400
++#define EXT_CFG_FUNC_NUM_SHIFT                12
++#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
++#define EXT_CFG_DEV_NUM_SHIFT         15
++#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
++#define EXT_CFG_BUS_NUM_SHIFT         20
++#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
++
++#define PCIE_DEVICE_OFFSET_6318               0x9000
++#define PCIE_DEVICE_OFFSET_6328               0x8000
+ /*************************************************************************
+  * _REG relative to RSET_OTP
+--- a/arch/mips/pci/ops-bcm63xx.c
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
+       if (!bcm63xx_pcie_can_access(bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (bus->number == PCIE_BUS_DEVICE)
+-              reg += PCIE_DEVICE_OFFSET;
++      if (bus->number == PCIE_BUS_DEVICE) {
++              if (BCMCPU_IS_6318())
++                      reg += PCIE_DEVICE_OFFSET_6318;
++              else
++                      reg += PCIE_DEVICE_OFFSET_6328;
++      }
+       data = bcm_pcie_readl(reg);
+@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
+       if (!bcm63xx_pcie_can_access(bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (bus->number == PCIE_BUS_DEVICE)
+-              reg += PCIE_DEVICE_OFFSET;
++      if (bus->number == PCIE_BUS_DEVICE) {
++              if (BCMCPU_IS_6318())
++                      reg += PCIE_DEVICE_OFFSET_6318;
++              else
++                      reg += PCIE_DEVICE_OFFSET_6328;
++      }
+       data = bcm_pcie_readl(reg);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
+ void __iomem *pci_iospace_start;
+-static void __init bcm63xx_reset_pcie(void)
++static void __init bcm63xx_reset_pcie_gen1(void)
+ {
+       u32 val;
+       u32 reg;
+@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
+       mdelay(200);
+ }
+-static struct clk *pcie_clk;
+-
+-static int __init bcm63xx_register_pcie(void)
++static void __init bcm63xx_reset_pcie_gen2(void)
+ {
+       u32 val;
+-      /* enable clock */
+-      pcie_clk = clk_get(NULL, "pcie");
+-      if (IS_ERR_OR_NULL(pcie_clk))
+-              return -ENODEV;
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
+-      clk_prepare_enable(pcie_clk);
++      /* reset the PCIe core */
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
++      mdelay(10);
++      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
++      val &= ~HARD_DEBUG_SERDES_IDDQ;
++      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
++      mdelay(200);
++}
+-      bcm63xx_reset_pcie();
++static void __init bcm63xx_init_pcie_gen1(void)
++{
++      u32 val;
+       /* configure the PCIe bridge */
+       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
+@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
+       val |= OPT2_CFG_TYPE1_BD_SEL;
+       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
++      /* set bar0 to little endian */
++      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
++      val |= BASEMASK_REMAP_EN;
++      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
++
++      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
++      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
++}
++
++static void __init bcm63xx_init_pcie_gen2(void)
++{
++      u32 val;
++
++      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
++                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
++                      PCIE_CPU_INT1_MASK_CLEAR_REG);
++
++      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
++      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
++             C2P_BASELIMIT_BASE_SHIFT;
++
++      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
++
++      /* set bar0 to little endian */
++      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
++      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
++      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++
++      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
++      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
++      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
++
++      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
++                      PCIE_EXT_CFG_INDEX_REG);
++}
++
++static struct clk *pcie_clk;
++
++static int __init bcm63xx_register_pcie(void)
++{
++      u32 val;
++
++      /* enable clock */
++      pcie_clk = clk_get(NULL, "pcie");
++      if (IS_ERR_OR_NULL(pcie_clk))
++              return -ENODEV;
++
++      clk_prepare_enable(pcie_clk);
++
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++              bcm63xx_reset_pcie_gen1();
++              bcm63xx_init_pcie_gen1();
++      } else {
++              bcm63xx_reset_pcie_gen2();
++              bcm63xx_init_pcie_gen2();
++      }
++
+       /* setup class code as bridge */
+       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
+       val &= ~IDVAL3_CLASS_CODE_MASK;
+@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
+       val &= ~CONFIG2_BAR1_SIZE_MASK;
+       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+-      /* set bar0 to little endian */
+-      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
+-      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+-      val |= BASEMASK_REMAP_EN;
+-      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-
+-      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+-      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+-
+       register_pci_controller(&bcm63xx_pcie_controller);
+       return 0;
+@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
+       if (!bcm63xx_pci_enabled)
+               return -ENODEV;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++      if (BCMCPU_IS_6318()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
++      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
+       } else if (BCMCPU_IS_63268()) {
+@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
+       }
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
new file mode 100644 (file)
index 0000000..a91a29b
--- /dev/null
@@ -0,0 +1,74 @@
+From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 12:26:57 +0100
+Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
+ result
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
+ arch/mips/bcm63xx/prom.c                               |  4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 3 files changed, 13 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -22,6 +22,8 @@
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
++static int flash_type;
++
+ static struct mtd_partition mtd_partitions[] = {
+       {
+               .name           = "cfe",
+@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
+       }
+ }
++void __init bcm63xx_flash_detect(void)
++{
++      flash_type = bcm63xx_detect_flash_type();
++}
++
+ int __init bcm63xx_flash_register(void)
+ {
+-      int flash_type;
+       u32 val;
+-      flash_type = bcm63xx_detect_flash_type();
+-
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
+               /* read base address of boot chip select (0) */
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -18,6 +18,7 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_gpio.h>
++#include <bcm63xx_dev_flash.h>
+ void __init prom_init(void)
+ {
+@@ -56,6 +57,9 @@ void __init prom_init(void)
+       /* register gpiochip */
+       bcm63xx_gpio_init();
++      /* detect and setup flash access */
++      bcm63xx_flash_detect();
++
+       /* do low level board init */
+       board_prom_init();
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -7,6 +7,8 @@ enum {
+       BCM63XX_FLASH_TYPE_NAND,
+ };
++void bcm63xx_flash_detect(void);
++
+ int __init bcm63xx_flash_register(void);
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
new file mode 100644 (file)
index 0000000..2b19600
--- /dev/null
@@ -0,0 +1,63 @@
+From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 13:25:25 +0100
+Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
+
+Some bootloaders leave the flash access in an invalid state with dual
+read enabled; fix it by disabling it and falling back to simple fast
+reads.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -110,9 +110,46 @@ static int __init bcm63xx_detect_flash_t
+       }
+ }
++#define HSSPI_FLASH_CTRL_REG          0x14
++#define FLASH_CTRL_READ_OPCODE_MASK   0xff
++#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
++#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
++#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
++#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
++#define FLASH_CTRL_MB_EN              (1 << 23)
++
+ void __init bcm63xx_flash_detect(void)
+ {
+       flash_type = bcm63xx_detect_flash_type();
++
++      /* reduce flash mapping to single i/o reads for safety */
++      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
++          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++           BCMCPU_IS_63268())) {
++              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
++
++              if (!(val & FLASH_CTRL_MB_EN))
++                      return;
++
++              val &= ~FLASH_CTRL_MB_EN;
++              val &= ~FLASH_CTRL_READ_OPCODE_MASK;
++
++              switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
++              case FLASH_CTRL_ADDR_BYTES_3:
++                      val |= 0x0b; /* OPCODE_FAST_READ */
++                      break;
++              case FLASH_CTRL_ADDR_BYTES_4:
++                      val |= 0x0c; /* OPCODE_FAST_READ_4B */
++                      break;
++              case FLASH_CTRL_ADDR_BYTES_2:
++              default:
++                      pr_warn("unsupported address byte mode (%x), not fixing up\n",
++                              val & FLASH_CTRL_ADDR_BYTES_MASK);
++                      return;
++              }
++
++              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++      }
+ }
+ int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
new file mode 100644 (file)
index 0000000..384702c
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -136,7 +136,11 @@ static struct clk clk_ephy = {
+  */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
++                              CKCTL_6318_ROBOSW025_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
++      } else if (BCMCPU_IS_6328())
+               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
+       else if (BCMCPU_IS_6362())
+               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
+@@ -183,18 +187,22 @@ static struct clk clk_pcm = {
+  */
+ static void usbh_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
+-      else if (BCMCPU_IS_6348())
++      } else if (BCMCPU_IS_6348()) {
+               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+-      else if (BCMCPU_IS_6368())
++      } else if (BCMCPU_IS_6368()) {
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+-      else if (BCMCPU_IS_63268())
++      } else if (BCMCPU_IS_63268()) {
+               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+-      else
++      } else {
+               return;
++      }
+       if (enable)
+               msleep(100);
+@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev,
+               return &clk_enetsw;
+       if (!strcmp(id, "ephy"))
+               return &clk_ephy;
+-      if (!strcmp(id, "usbh"))
++      if (!strcmp(id, "usbh") || (BCMCPU_IS_6318() && !strcmp(id, "usbd")))
+               return &clk_usbh;
+-      if (!strcmp(id, "usbd"))
++      if (!strcmp(id, "usbd") && !BCMCPU_IS_6318())
+               return &clk_usbd;
+       if (!strcmp(id, "spi"))
+               return &clk_spi;
diff --git a/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch
new file mode 100644 (file)
index 0000000..5742e2c
--- /dev/null
@@ -0,0 +1,124 @@
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_6318()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+       }
+       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_6318()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+       }
+       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -680,6 +680,12 @@
+ #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
+ #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
++#define GPIO_PINMUX_SEL0_6318         0x1c
++#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
++#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
+ #define GPIO_PINMUX_OTHR_REG          0x24
+ #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
+@@ -998,6 +1004,7 @@
+ #define USBH_PRIV_SWAP_6358_REG               0x0
+ #define USBH_PRIV_SWAP_6368_REG               0x1c
++#define USBH_PRIV_SWAP_6318_REG               0x0c
+ #define USBH_PRIV_SWAP_USBD_SHIFT     6
+ #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
+@@ -1023,6 +1030,13 @@
+ #define USBH_PRIV_SETUP_IOC_SHIFT     4
+ #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_6318_REG      0x00
++#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
++#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
++#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
++#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
++#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
++
+ /*************************************************************************
+  * _REG relative to RSET_USBD
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -914,6 +914,15 @@ void __init board_prom_init(void)
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
++
++#if IS_ENABLED(CONFIG_USB)
++      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
++              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
++              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
++              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
++              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
++      }
++#endif
+ }
+ /*
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -22,6 +22,8 @@ config BCM63XX_CPU_6318
+       bool "support 6318 CPU"
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
new file mode 100644 (file)
index 0000000..2489c21
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -585,6 +585,9 @@
+ #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
+ #define TIMER_CTL_ENABLE_MASK         (1 << 31)
++/* Clock reset control (63268 only) */
++#define TIMER_CLK_RST_CTL_REG         0x2c
++#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
+ /*************************************************************************
+  * _REG relative to RSET_WDT
+@@ -1546,6 +1549,11 @@
+ #define STRAPBUS_63268_FCVO_SHIFT     21
+ #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
++#define MISC_IDDQ_CTRL_6328_REG               0x48
++#define MISC_IDDQ_CTRL_63268_REG      0x4c
++
++#define IDDQ_CTRL_63268_USBH          (1 << 4)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -62,6 +62,26 @@ static void bcm_ub_hwclock_set(u32 mask,
+       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
+ }
++static void bcm_misc_iddq_set(u32 mask, int enable)
++{
++      u32 offset;
++      u32 reg;
++
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++              offset = MISC_IDDQ_CTRL_6328_REG;
++      else if (BCMCPU_IS_63268())
++              offset = MISC_IDDQ_CTRL_63268_REG;
++      else
++              return;
++
++      reg = bcm_misc_readl(offset);
++      if (enable)
++              reg &= ~mask;
++      else
++              reg |= mask;
++      bcm_misc_writel(reg, offset);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -199,7 +219,17 @@ static void usbh_set(struct clk *clk, in
+       } else if (BCMCPU_IS_6368()) {
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+       } else if (BCMCPU_IS_63268()) {
++              u32 reg;
++
+               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
++              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
++              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
++              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
++              if (enable)
++                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
++              else
++                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
++              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
+       } else {
+               return;
+       }
diff --git a/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
new file mode 100644 (file)
index 0000000..1dff9bf
--- /dev/null
@@ -0,0 +1,117 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1032,11 +1032,18 @@
+ #define USBH_PRIV_SETUP_6368_REG      0x28
+ #define USBH_PRIV_SETUP_IOC_SHIFT     4
+ #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_IPP_SHIFT     5
++#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
+ #define USBH_PRIV_SETUP_6318_REG      0x00
++#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
+ #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
+-#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
+-#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
++
++#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
++#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
++#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
++#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
++
+ #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
+ #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -72,6 +72,8 @@ config BCM63XX_CPU_63268
+       bool "support 63268 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+-              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_63268()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+       } else if (BCMCPU_IS_6318()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
+@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_63268()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+       } else if (BCMCPU_IS_6318()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
new file mode 100644 (file)
index 0000000..43709af
--- /dev/null
@@ -0,0 +1,107 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -42,6 +42,7 @@ struct board_info {
+       /* USB config */
+       struct bcm63xx_usbd_platform_data usbd;
++      unsigned int num_usbh_ports:2;
+       /* DSP config */
+       struct bcm63xx_dsp_platform_data dsp;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_EHCI_H_
+ #define BCM63XX_DEV_USB_EHCI_H_
+-int bcm63xx_ehci_register(void);
++int bcm63xx_ehci_register(unsigned int num_ports);
+ #endif /* BCM63XX_DEV_USB_EHCI_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_OHCI_H_
+ #define BCM63XX_DEV_USB_OHCI_H_
+-int bcm63xx_ohci_register(void);
++int bcm63xx_ohci_register(unsigned int num_ports);
+ #endif /* BCM63XX_DEV_USB_OHCI_H_ */
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -965,6 +965,7 @@ int __init board_register_devices(void)
+ {
+       int button_count = 0;
+       int led_count = 0;
++      int usbh_ports = 0;
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -987,14 +988,21 @@ int __init board_register_devices(void)
+           !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+               bcm63xx_enetsw_register(&board.enetsw);
++      if ((board.has_ohci0 || board.has_ehci0)) {
++              usbh_ports = board.num_usbh_ports;
++
++              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
++                      usbh_ports = 1;
++      }
++
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
+       if (board.has_ehci0)
+-              bcm63xx_ehci_register();
++              bcm63xx_ehci_register(usbh_ports);
+       if (board.has_ohci0)
+-              bcm63xx_ohci_register();
++              bcm63xx_ohci_register(usbh_ports);
+       if (board.has_dsp)
+               bcm63xx_dsp_register(&board.dsp);
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
+       },
+ };
+-int __init bcm63xx_ehci_register(void)
++int __init bcm63xx_ehci_register(unsigned int num_ports)
+ {
+       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return 0;
++      bcm63xx_ehci_pdata.num_ports = num_ports;       
++
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+       ehci_resources[0].end = ehci_resources[0].start;
+       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
+--- a/arch/mips/bcm63xx/dev-usb-ohci.c
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
+       .no_big_frame_no        = 1,
+-      .num_ports              = 1,
+       .power_on               = bcm63xx_ohci_power_on,
+       .power_off              = bcm63xx_ohci_power_off,
+       .power_suspend          = bcm63xx_ohci_power_off,
+@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
+       },
+ };
+-int __init bcm63xx_ohci_register(void)
++int __init bcm63xx_ohci_register(unsigned int num_ports)
+ {
+       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
+               return -ENODEV;
++      bcm63xx_ohci_pdata.num_ports = num_ports;
++
+       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+       ohci_resources[0].end = ohci_resources[0].start;
+       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch
new file mode 100644 (file)
index 0000000..e007ddd
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -634,6 +634,7 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
+       .leds = {
+               {
diff --git a/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch
new file mode 100644 (file)
index 0000000..1594a06
--- /dev/null
@@ -0,0 +1,65 @@
+From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
+ drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
+ drivers/mtd/redboot.c                     |   13 +++++++++--
+ 3 files changed, 38 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -32,7 +32,7 @@ static struct mtd_partition mtd_partitio
+       }
+ };
+-static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
++static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
+ static struct physmap_flash_data flash_data = {
+       .width                  = 2,
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
+       int nulllen = 0;
+       int numslots;
+       unsigned long offset;
++      unsigned long fis_origin = 0;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+       static char nullstring[] = "unallocated";
+ #endif
+@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
+               goto out;
+       }
++      if (data && data->origin) {
++              fis_origin = data->origin;
++      } else {
++              for (i = 0; i < numslots; i++) {
++                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
++                              fis_origin = ((buf[i].flash_base & (master->size << 1)) - 1);
++                      }
++              }
++      }
++
+       for (i = 0; i < numslots; i++) {
+               struct fis_list *new_fl, **prev;
+@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
+                       goto out;
+               }
+               new_fl->img = &buf[i];
+-              if (data && data->origin)
+-                      buf[i].flash_base -= data->origin;
+-              else
+-                      buf[i].flash_base &= master->size-1;
++              if (fis_origin)
++                      buf[i].flash_base -= fis_origin;
++
++              buf[i].flash_base &= (master->size << 1) - 1;
+               /* I'm sure the JFFS2 code has done me permanent damage.
+                * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch
new file mode 100644 (file)
index 0000000..caf8b95
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/include/uapi/linux/bcm963xx_tag.h
++++ b/include/uapi/linux/bcm963xx_tag.h
+@@ -85,8 +85,10 @@ struct bcm_tag {
+       __u32 rootfs_crc;
+       /* 224-227: CRC32 of kernel partition */
+       __u32 kernel_crc;
+-      /* 228-235: Unused at present */
+-      char reserved1[8];
++      /* 228-231: Image sequence number */
++      char image_sequence[4];
++      /* 222-235: Openwrt: real rootfs length */
++      __u32 real_rootfs_length;
+       /* 236-239: CRC32 of header excluding last 20 bytes */
+       __u32 header_crc;
+       /* 240-255: Unused at present */
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -110,7 +110,8 @@ static int bcm63xx_parse_cfe_partitions(
+               } else {
+                       /* OpenWrt layout */
+                       rootfsaddr = kerneladdr + kernellen;
+-                      rootfslen = spareaddr - rootfsaddr;
++                      rootfslen = buf->real_rootfs_length;
++                      spareaddr = rootfsaddr + rootfslen;
+               }
+       } else {
+               pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
diff --git a/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
new file mode 100644 (file)
index 0000000..fc2e8ab
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1633,7 +1633,7 @@ static int compute_hw_mtu(struct bcm_ene
+       actual_mtu = mtu;
+       /* add ethernet header + vlan tag size */
+-      actual_mtu += VLAN_ETH_HLEN;
++      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
+       if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
+               return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch
new file mode 100644 (file)
index 0000000..4af96da
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -912,6 +912,8 @@ void __init board_prom_init(void)
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G3_EXT_MII |
+                               GPIO_MODE_6348_G0_EXT_MII;
++              else if (BCMCPU_IS_6358())
++                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -650,6 +650,8 @@
+ #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
+ #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
+ #define GPIO_MODE_6358_UTOPIA         (1 << 12)
++#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
++#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
+ #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
+ #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
new file mode 100644 (file)
index 0000000..d8405f5
--- /dev/null
@@ -0,0 +1,169 @@
+From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 6 Jan 2012 12:24:18 +0100
+Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
+
+Only connect/disconnect the phy during probe and remove, not during any
+open/close. The phy seldom changes during the runtime, and disconnecting
+the phy during close will prevent it from keeping any configuration over
+a down/up cycle.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c |   84 +++++++++++++-------------
+ 1 files changed, 41 insertions(+), 43 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
+       struct bcm_enet_priv *priv;
+       struct sockaddr addr;
+       struct device *kdev;
+-      struct phy_device *phydev;
+       int i, ret;
+       unsigned int size;
+-      char phy_id[MII_BUS_ID_SIZE + 3];
+       void *p;
+       u32 val;
+@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
+       kdev = &priv->pdev->dev;
+       if (priv->has_phy) {
+-              /* connect to PHY */
+-              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+-                       priv->mii_bus->id, priv->phy_id);
+-
+-              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
+-                                   PHY_INTERFACE_MODE_MII);
+-
+-              if (IS_ERR(phydev)) {
+-                      dev_err(kdev, "could not attach to PHY\n");
+-                      return PTR_ERR(phydev);
+-              }
+-
+-              /* mask with MAC supported features */
+-              phydev->supported &= (SUPPORTED_10baseT_Half |
+-                                    SUPPORTED_10baseT_Full |
+-                                    SUPPORTED_100baseT_Half |
+-                                    SUPPORTED_100baseT_Full |
+-                                    SUPPORTED_Autoneg |
+-                                    SUPPORTED_Pause |
+-                                    SUPPORTED_MII);
+-              phydev->advertising = phydev->supported;
+-
+-              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
+-                      phydev->advertising |= SUPPORTED_Pause;
+-              else
+-                      phydev->advertising &= ~SUPPORTED_Pause;
+-
+-              dev_info(kdev, "attached PHY at address %d [%s]\n",
+-                       phydev->addr, phydev->drv->name);
+-
++              /* Reset state */
+               priv->old_link = 0;
+               priv->old_duplex = -1;
+               priv->old_pause = -1;
+-              priv->phydev = phydev;
+       }
+       /* mask all interrupts and request them */
+@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
+       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
+       if (ret)
+-              goto out_phy_disconnect;
++              return ret;
+       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
+                         dev->name, dev);
+@@ -1127,9 +1095,6 @@ out_freeirq_rx:
+ out_freeirq:
+       free_irq(dev->irq, dev);
+-out_phy_disconnect:
+-      phy_disconnect(priv->phydev);
+-
+       return ret;
+ }
+@@ -1234,12 +1199,6 @@ static int bcm_enet_stop(struct net_devi
+       free_irq(priv->irq_rx, dev);
+       free_irq(dev->irq, dev);
+-      /* release phy */
+-      if (priv->has_phy) {
+-              phy_disconnect(priv->phydev);
+-              priv->phydev = NULL;
+-      }
+-
+       return 0;
+ }
+@@ -1834,6 +1793,8 @@ static int bcm_enet_probe(struct platfor
+       /* MII bus registration */
+       if (priv->has_phy) {
++              struct phy_device *phydev;
++              char phy_id[MII_BUS_ID_SIZE + 3];
+               priv->mii_bus = mdiobus_alloc();
+               if (!priv->mii_bus) {
+@@ -1871,6 +1832,38 @@ static int bcm_enet_probe(struct platfor
+                       dev_err(&pdev->dev, "unable to register mdio bus\n");
+                       goto out_free_mdio;
+               }
++
++              /* connect to PHY */
++              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
++                       priv->mii_bus->id, priv->phy_id);
++
++              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
++                                   PHY_INTERFACE_MODE_MII);
++
++              if (IS_ERR(phydev)) {
++                      dev_err(&pdev->dev, "could not attach to PHY\n");
++                      goto out_unregister_mdio;
++              }
++
++              /* mask with MAC supported features */
++              phydev->supported &= (SUPPORTED_10baseT_Half |
++                                    SUPPORTED_10baseT_Full |
++                                    SUPPORTED_100baseT_Half |
++                                    SUPPORTED_100baseT_Full |
++                                    SUPPORTED_Autoneg |
++                                    SUPPORTED_Pause |
++                                    SUPPORTED_MII);
++              phydev->advertising = phydev->supported;
++
++              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
++                      phydev->advertising |= SUPPORTED_Pause;
++              else
++                      phydev->advertising &= ~SUPPORTED_Pause;
++
++              dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
++                       phydev->addr, phydev->drv->name);
++
++              priv->phydev = phydev;
+       } else {
+               /* run platform code to initialize PHY device */
+@@ -1916,6 +1909,9 @@ static int bcm_enet_probe(struct platfor
+       return 0;
+ out_unregister_mdio:
++      if (priv->phydev)
++              phy_disconnect(priv->phydev);
++
+       if (priv->mii_bus)
+               mdiobus_unregister(priv->mii_bus);
+@@ -1957,6 +1953,8 @@ static int bcm_enet_remove(struct platfo
+       enet_writel(priv, 0, ENET_MIISC_REG);
+       if (priv->has_phy) {
++              phy_disconnect(priv->phydev);
++              priv->phydev = NULL;
+               mdiobus_unregister(priv->mii_bus);
+               mdiobus_free(priv->mii_bus);
+       } else {
diff --git a/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
new file mode 100644 (file)
index 0000000..52c75a8
--- /dev/null
@@ -0,0 +1,53 @@
+From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 15 Jul 2012 20:08:57 +0200
+Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
+ 2 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -966,6 +966,19 @@
+ #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
+ #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
++/* Port RGMII control register */
++#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
++#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
++#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
++#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
++#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
++#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
++#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
++#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
++
++/* Port RGMII timing register */
++#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
++
+ /* MDIO control register */
+ #define ENETSW_MDIOC_REG              (0xb0)
+ #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2228,6 +2228,18 @@ static int bcm_enetsw_open(struct net_de
+               priv->sw_port_link[i] = 0;
+       }
++      /* enable external ports */
++      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
++              u8 rgmii_ctrl;
++
++              if (!priv->used_ports[i].used)
++                      continue;
++
++              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
++              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
++              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
++      }
++
+       /* reset mib */
+       val = enetsw_readb(priv, ENETSW_GMCR_REG);
+       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
new file mode 100644 (file)
index 0000000..ccad2e8
--- /dev/null
@@ -0,0 +1,133 @@
+From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 15:00:38 +0200
+Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-flash.c                     |   33 +++++++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
+ 2 files changed, 33 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -16,9 +16,12 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+@@ -57,6 +60,21 @@ static struct platform_device mtd_dev =
+       },
+ };
++static struct flash_platform_data bcm63xx_flash_data = {
++      .part_probe_types       = bcm63xx_part_types,
++};
++
++static struct spi_board_info bcm63xx_spi_flash_info[] = {
++      {
++              .bus_num        = 0,
++              .chip_select    = 0,
++              .mode           = 0,
++              .max_speed_hz   = 781000,
++              .modalias       = "m25p80",
++              .platform_data  = &bcm63xx_flash_data,
++      },
++};
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+       u32 val;
+@@ -64,9 +82,15 @@ static int __init bcm63xx_detect_flash_t
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6318_CPU_ID:
+               /* only support serial flash */
++              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
+               return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6328_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
++              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
++
+               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+@@ -85,12 +109,20 @@ static int __init bcm63xx_detect_flash_t
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6362_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+                       return BCM63XX_FLASH_TYPE_NAND;
+       case BCM6368_CPU_ID:
+               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
++              if (val & STRAPBUS_6368_SPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+               case STRAPBUS_6368_BOOT_SEL_NAND:
+                       return BCM63XX_FLASH_TYPE_NAND;
+@@ -101,6 +133,11 @@ static int __init bcm63xx_detect_flash_t
+               }
+       case BCM63268_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+@@ -167,8 +204,15 @@ int __init bcm63xx_flash_register(void)
+               return platform_device_register(&mtd_dev);
+       case BCM63XX_FLASH_TYPE_SERIAL:
+-              pr_warn("unsupported serial flash detected\n");
+-              return -ENODEV;
++              if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++                  BCMCPU_IS_63268())
++                      bcm63xx_spi_flash_info[0].bus_num = 1;
++
++              if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
++                      bcm63xx_flash_data.max_transfer_len = SPI_6358_MSG_DATA_SIZE;
++
++              return spi_register_board_info(bcm63xx_spi_flash_info,
++                                      ARRAY_SIZE(bcm63xx_spi_flash_info));
+       case BCM63XX_FLASH_TYPE_NAND:
+               pr_warn("unsupported NAND flash detected\n");
+               return -ENODEV;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -707,6 +707,7 @@
+ #define GPIO_STRAPBUS_REG             0x40
+ #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
+ #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
++#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
+ #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
+ #define STRAPBUS_6368_BOOT_SEL_NAND   0
+ #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
+@@ -1577,6 +1578,7 @@
+ #define IDDQ_CTRL_63268_USBH          (1 << 4)
+ #define MISC_STRAPBUS_6328_REG                0x240
++#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+ #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch
new file mode 100644 (file)
index 0000000..3511120
--- /dev/null
@@ -0,0 +1,41 @@
+From 266c506f4b262bd6aba0776a03d82c98e65d9906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 1 May 2012 17:32:36 +0200
+Subject: [PATCH 63/79] MTD: physmap: allow passing pp_data
+
+---
+ drivers/mtd/maps/physmap.c  |    4 +++-
+ include/linux/mtd/physmap.h |    1 +
+ 2 files changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -96,6 +96,7 @@ static int physmap_flash_probe(struct pl
+ {
+       struct physmap_flash_data *physmap_data;
+       struct physmap_flash_info *info;
++      struct mtd_part_parser_data *pp_data;
+       const char * const *probe_type;
+       const char * const *part_types;
+       int err = 0;
+@@ -187,8 +188,9 @@ static int physmap_flash_probe(struct pl
+       spin_lock_init(&info->vpp_lock);
+       part_types = physmap_data->part_probe_types ? : part_probe_types;
++      pp_data = physmap_data->pp_data ? physmap_data->pp_data : NULL;
+-      mtd_device_parse_register(info->cmtd, part_types, NULL,
++      mtd_device_parse_register(info->cmtd, part_types, pp_data,
+                                 physmap_data->parts, physmap_data->nr_parts);
+       return 0;
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -31,6 +31,7 @@ struct physmap_flash_data {
+       char                    *probe_type;
+       struct mtd_partition    *parts;
+       const char * const      *part_probe_types;
++      struct mtd_part_parser_data *pp_data;
+ };
+ #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
new file mode 100644 (file)
index 0000000..7991fad
--- /dev/null
@@ -0,0 +1,81 @@
+From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:40:03 +0200
+Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
+ 2 files changed, 18 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -33,6 +33,7 @@
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include <pci_ath9k_fixup.h>
+ #include <uapi/linux/bcm933xx_hcs.h>
+ #include <uapi/linux/bcm963xx_tag.h>
+@@ -969,6 +970,7 @@ int __init board_register_devices(void)
+       int button_count = 0;
+       int led_count = 0;
+       int usbh_ports = 0;
++      int i;
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -1014,7 +1016,8 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+ #ifdef CONFIG_SSB_PCIHOST
+-      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++      if (!board.has_caldata &&
++          !bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+               if (ssb_arch_register_fallback_sprom(
+@@ -1061,5 +1064,9 @@ int __init board_register_devices(void)
+               platform_device_register(&bcm63xx_gpio_keys_device);
+       }
++      /* register any fixups */
++      for (i = 0; i < board.has_caldata; i++)
++              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++
+       return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -8,6 +8,7 @@
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_dev_dsp.h>
++#include <pci_ath9k_fixup.h>
+ /*
+  * flash mapping
+@@ -15,6 +16,11 @@
+ #define BCM963XX_CFE_VERSION_OFFSET   0x570
+ #define BCM963XX_NVRAM_OFFSET         0x580
++struct ath9k_caldata {
++      unsigned int    slot;
++      u32             caldata_offset;
++};
++
+ /*
+  * board definition
+  */
+@@ -34,6 +40,10 @@ struct board_info {
+       unsigned int    has_dsp:1;
+       unsigned int    has_uart0:1;
+       unsigned int    has_uart1:1;
++      unsigned int    has_caldata:2;
++
++      /* wifi calibration data config */
++      struct ath9k_caldata caldata[2];
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch
new file mode 100644 (file)
index 0000000..63f9802
--- /dev/null
@@ -0,0 +1,40 @@
+From 7f17dfe9009beb07a3de0e380932a725293829df Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 1 May 2012 17:33:03 +0200
+Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
+
+---
+ drivers/mtd/devices/m25p80.c |    3 +++
+ include/linux/spi/flash.h    |    2 ++
+ 2 files changed, 5 insertions(+)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1149,6 +1149,9 @@ static int m25p_probe(struct spi_device
+                       dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
+       }
++      if (data && data->pp_data)
++              memcpy(&ppdata, data->pp_data, sizeof(ppdata));
++
+       info = (void *)id->driver_data;
+       if (info->jedec_id) {
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -12,6 +12,7 @@ struct mtd_part_parser_data;
+  *    with chips that can't be queried for JEDEC or other IDs
+  * @part_probe_types: optional list of MTD parser names to use for
+  *    partitioning
++ * @pp_data: optional partition parser data.
+  *
+  * @max_transfer_len: option maximum read/write length limitation for
+  *    SPI controllers not able to transfer any length commands.
+@@ -30,6 +31,7 @@ struct flash_platform_data {
+       char            *type;
+       const char      **part_probe_types;
++      struct mtd_part_parser_data *pp_data;
+       unsigned int    max_transfer_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
new file mode 100644 (file)
index 0000000..bde8961
--- /dev/null
@@ -0,0 +1,31 @@
+From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 13 Jan 2014 12:12:30 +0100
+Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -222,3 +222,8 @@ int __init bcm63xx_flash_register(void)
+               return -ENODEV;
+       }
+ }
++
++int bcm63xx_flash_get_type(void)
++{
++      return flash_type;
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -11,4 +11,6 @@ void bcm63xx_flash_detect(void);
+ int __init bcm63xx_flash_register(void);
++int bcm63xx_flash_get_type(void);
++
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
new file mode 100644 (file)
index 0000000..af06428
--- /dev/null
@@ -0,0 +1,229 @@
+From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:36:11 +0200
+Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    3 +-
+ arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
+ 3 files changed, 199 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
+                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
+-                 usb-common.o
++                 pci-ath9k-fixup.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -0,0 +1,192 @@
++/*
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  Based on
++ *
++ *  Atheros AP94 reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/ath9k_platform.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
++#include <pci_ath9k_fixup.h>
++
++#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
++
++struct ath9k_fixup {
++      unsigned slot;
++      u8 mac[ETH_ALEN];
++      struct ath9k_platform_data pdata;
++};
++
++static int ath9k_num_fixups;
++static struct ath9k_fixup ath9k_fixups[2] = {
++      {
++              .slot = 255,
++              .pdata = {
++                      .led_pin        = -1,
++              },
++      },
++      {
++              .slot = 255,
++              .pdata = {
++                      .led_pin        = -1,
++              },
++      },
++};
++
++static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
++{
++      u32 addr;
++
++      if (BCMCPU_IS_6328()) {
++              addr = 0x18000000;
++      } else {
++              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
++              addr &= MPI_CSBASE_BASE_MASK;
++      }
++
++      switch (bcm63xx_flash_get_type()) {
++      case BCM63XX_FLASH_TYPE_PARALLEL:
++              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++              return eeprom;
++      case BCM63XX_FLASH_TYPE_SERIAL:
++              /* the first megabyte is memory mapped */
++              if (offset < 0x100000) {
++                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++                      return eeprom;
++              }
++
++              if (BCMCPU_IS_6328()) {
++                      /* we can change the memory mapped megabyte */
++                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
++                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++                      bcm_hsspi_writel(0, 0x18);
++                      return eeprom;
++              }
++              /* can't do anything here without talking to the SPI controller. */
++      case BCM63XX_FLASH_TYPE_NAND:
++      default:
++              return NULL;
++      }
++}
++
++static void ath9k_pci_fixup(struct pci_dev *dev)
++{
++      void __iomem *mem;
++      struct ath9k_platform_data *pdata = NULL;
++      u16 *cal_data = NULL;
++      u16 cmd;
++      u32 bar0;
++      u32 val;
++      unsigned i;
++
++      for (i = 0; i < ath9k_num_fixups; i++) {
++              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
++                      continue;
++
++              cal_data = ath9k_fixups[i].pdata.eeprom_data;
++              pdata = &ath9k_fixups[i].pdata;
++              break;
++      }
++
++      if (cal_data == NULL)
++              return;
++
++      if (*cal_data != 0xa55a) {
++              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++              return;
++      }
++
++      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++      switch (bcm63xx_get_cpu_id()) {
++      case BCM6328_CPU_ID:
++              val = BCM_PCIE_MEM_BASE_PA_6328;
++              break;
++      case BCM6348_CPU_ID:
++      case BCM6358_CPU_ID:
++      case BCM6368_CPU_ID:
++              val = BCM_PCI_MEM_BASE_PA;
++              break;
++      default:
++              BUG();
++      }
++
++      mem = ioremap(val, 0x10000);
++      if (!mem) {
++              pr_err("pci %s: ioremap error\n", pci_name(dev));
++              return;
++      }
++
++      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
++
++      pci_read_config_word(dev, PCI_COMMAND, &cmd);
++      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++      pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++      /* set offset to first reg address */
++      cal_data += 3;
++      while(*cal_data != 0xffff) {
++              u32 reg;
++              reg = *cal_data++;
++              val = *cal_data++;
++              val |= (*cal_data++) << 16;
++
++              writel(val, mem + reg);
++              udelay(100);
++      }
++
++      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++      dev->vendor = val & 0xffff;
++      dev->device = (val >> 16) & 0xffff;
++
++      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++      dev->revision = val & 0xff;
++      dev->class = val >> 8; /* upper 3 bytes */
++
++      pci_read_config_word(dev, PCI_COMMAND, &cmd);
++      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++      pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++      iounmap(mem);
++
++      dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
++
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++{
++      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
++              return;
++
++      ath9k_fixups[ath9k_num_fixups].slot = slot;
++
++      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
++              return;
++
++      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
++              return;
++
++      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
++      ath9k_num_fixups++;
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -0,0 +1,7 @@
++#ifndef _PCI_ATH9K_FIXUP
++#define _PCI_ATH9K_FIXUP
++
++
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++
++#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
new file mode 100644 (file)
index 0000000..3b02c07
--- /dev/null
@@ -0,0 +1,120 @@
+Allow bcm63xxpart to receive a caldata offset if calibration data is
+contained in flash.
+---
+ drivers/mtd/bcm63xxpart.c      |   51 ++++++++++++++++++++++++++++++++++++---
+ include/linux/mtd/partitions.h |    2 +
+ 2 files changed, 49 insertions(+), 4 deletions(-)
+
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -53,10 +53,12 @@ static int bcm63xx_parse_cfe_partitions(
+       struct mtd_partition *parts;
+       int ret;
+       size_t retlen;
+-      unsigned int rootfsaddr, kerneladdr, spareaddr;
++      unsigned int rootfsaddr, kerneladdr, spareaddr, nvramaddr;
+       unsigned int rootfslen, kernellen, sparelen, totallen;
+       unsigned int cfelen, nvramlen;
+       unsigned int cfe_erasesize;
++      unsigned int caldatalen1 = 0, caldataaddr1 = 0;
++      unsigned int caldatalen2 = 0, caldataaddr2 = 0;
+       int i;
+       u32 computed_crc;
+       bool rootfs_first = false;
+@@ -70,6 +72,24 @@ static int bcm63xx_parse_cfe_partitions(
+       cfelen = cfe_erasesize;
+       nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+       nvramlen = roundup(nvramlen, cfe_erasesize);
++      nvramaddr = master->size - nvramlen;
++
++      if (data) {
++              if (data->caldata[0]) {
++                      caldatalen1 = cfe_erasesize;
++                      caldataaddr1 = rounddown(data->caldata[0],
++                                               cfe_erasesize);
++              }
++              if (data->caldata[1]) {
++                      caldatalen2 = cfe_erasesize;
++                      caldataaddr2 = rounddown(data->caldata[1],
++                                               cfe_erasesize);
++              }
++              if (caldataaddr1 == caldataaddr2) {
++                      caldataaddr2 = 0;
++                      caldatalen2 = 0;
++              }
++      }
+       /* Allocate memory for buffer */
+       buf = vmalloc(sizeof(struct bcm_tag));
+@@ -121,7 +141,7 @@ static int bcm63xx_parse_cfe_partitions(
+               rootfsaddr = 0;
+               spareaddr = cfelen;
+       }
+-      sparelen = master->size - spareaddr - nvramlen;
++      sparelen = min_not_zero(nvramaddr, caldataaddr1) - spareaddr;
+       /* Determine number of partitions */
+       if (rootfslen > 0)
+@@ -130,6 +150,12 @@ static int bcm63xx_parse_cfe_partitions(
+       if (kernellen > 0)
+               nrparts++;
++      if (caldatalen1 > 0)
++              nrparts++;
++
++      if (caldatalen2 > 0)
++              nrparts++;
++
+       /* Ask kernel for more memory */
+       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+       if (!parts) {
+@@ -167,15 +193,32 @@ static int bcm63xx_parse_cfe_partitions(
+               curpart++;
+       }
++      if (caldatalen1 > 0) {
++              if (caldatalen2 > 0)
++                      parts[curpart].name = "cal_data1";
++              else
++                      parts[curpart].name = "cal_data";
++              parts[curpart].offset = caldataaddr1;
++              parts[curpart].size = caldatalen1;
++              curpart++;
++      }
++
++      if (caldatalen2 > 0) {
++              parts[curpart].name = "cal_data2";
++              parts[curpart].offset = caldataaddr2;
++              parts[curpart].size = caldatalen2;
++              curpart++;
++      }
++
+       parts[curpart].name = "nvram";
+-      parts[curpart].offset = master->size - nvramlen;
++      parts[curpart].offset = nvramaddr;
+       parts[curpart].size = nvramlen;
+       curpart++;
+       /* Global partition "linux" to make easy firmware upgrade */
+       parts[curpart].name = "linux";
+       parts[curpart].offset = cfelen;
+-      parts[curpart].size = master->size - cfelen - nvramlen;
++      parts[curpart].size = min_not_zero(nvramaddr, caldataaddr1) - cfelen;
+       for (i = 0; i < nrparts; i++)
+               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -56,10 +56,12 @@ struct device_node;
+ /**
+  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+  * @origin: for RedBoot, start address of MTD device
++ * @caldata: for CFE, start address of wifi calibration data
+  * @of_node: for OF parsers, device node containing partitioning information
+  */
+ struct mtd_part_parser_data {
+       unsigned long origin;
++      unsigned long caldata[2];
+       struct device_node *of_node;
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
new file mode 100644 (file)
index 0000000..6f913dd
--- /dev/null
@@ -0,0 +1,83 @@
+From 977f8a30103b9c4992cab8f49357fe0d4274004f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:55:26 +0200
+Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c              |    2 +-
+ arch/mips/bcm63xx/dev-flash.c                          |    9 ++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |    4 +++-
+ 3 files changed, 12 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1036,7 +1036,7 @@ int __init board_register_devices(void)
+       if (board.num_spis)
+               spi_register_board_info(board.spis, board.num_spis);
+-      bcm63xx_flash_register();
++      bcm63xx_flash_register(board.has_caldata, board.caldata);
+       /* count number of LEDs defined by this device */
+       while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -35,12 +35,15 @@ static struct mtd_partition mtd_partitio
+       }
+ };
++static struct mtd_part_parser_data bcm63xx_parser_data;
++
+ static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
+ static struct physmap_flash_data flash_data = {
+       .width                  = 2,
+       .parts                  = mtd_partitions,
+       .part_probe_types       = bcm63xx_part_types,
++      .pp_data                = &bcm63xx_parser_data,
+ };
+ static struct resource mtd_resources[] = {
+@@ -62,6 +65,7 @@ static struct platform_device mtd_dev =
+ static struct flash_platform_data bcm63xx_flash_data = {
+       .part_probe_types       = bcm63xx_part_types,
++      .pp_data                = &bcm63xx_parser_data,
+ };
+ static struct spi_board_info bcm63xx_spi_flash_info[] = {
+@@ -189,9 +193,13 @@ void __init bcm63xx_flash_detect(void)
+       }
+ }
+-int __init bcm63xx_flash_register(void)
++int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
+ {
+       u32 val;
++      unsigned int i;
++
++      for (i = 0; i < num_caldata; i++)
++              bcm63xx_parser_data.caldata[i] = caldata[i].caldata_offset;
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -1,6 +1,8 @@
+ #ifndef __BCM63XX_FLASH_H
+ #define __BCM63XX_FLASH_H
++#include <board_bcm963xx.h>
++
+ enum {
+       BCM63XX_FLASH_TYPE_PARALLEL,
+       BCM63XX_FLASH_TYPE_SERIAL,
+@@ -9,7 +11,7 @@ enum {
+ void bcm63xx_flash_detect(void);
+-int __init bcm63xx_flash_register(void);
++int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
+ int bcm63xx_flash_get_type(void);
diff --git a/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
new file mode 100644 (file)
index 0000000..cbceaa9
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -2,6 +2,7 @@
+ #define _PCI_ATH9K_FIXUP
+-void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++      unsigned endian_check) __init;
+ #endif /* _PCI_ATH9K_FIXUP */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -19,6 +19,7 @@
+ struct ath9k_caldata {
+       unsigned int    slot;
+       u32             caldata_offset;
++      unsigned int    endian_check:1;
+ };
+ /*
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -174,12 +174,14 @@ static void ath9k_pci_fixup(struct pci_d
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+-void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++      unsigned endian_check)
+ {
+       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+               return;
+       ath9k_fixups[ath9k_num_fixups].slot = slot;
++      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
+       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+               return;
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1066,7 +1066,8 @@ int __init board_register_devices(void)
+       /* register any fixups */
+       for (i = 0; i < board.has_caldata; i++)
+-              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
++                      board.caldata[i].endian_check);
+       return 0;
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
new file mode 100644 (file)
index 0000000..f4821b6
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1067,7 +1067,7 @@ int __init board_register_devices(void)
+       /* register any fixups */
+       for (i = 0; i < board.has_caldata; i++)
+               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-                      board.caldata[i].endian_check);
++                      board.caldata[i].endian_check, board.caldata[i].led_pin);
+       return 0;
+ }
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -175,13 +175,14 @@ static void ath9k_pci_fixup(struct pci_d
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+ void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-      unsigned endian_check)
++      unsigned endian_check, int led_pin)
+ {
+       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+               return;
+       ath9k_fixups[ath9k_num_fixups].slot = slot;
+       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
++      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
+       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+               return;
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -20,6 +20,7 @@ struct ath9k_caldata {
+       unsigned int    slot;
+       u32             caldata_offset;
+       unsigned int    endian_check:1;
++      int             led_pin;
+ };
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -3,6 +3,6 @@
+ void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-      unsigned endian_check) __init;
++      unsigned endian_check, int led_pin) __init;
+ #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
new file mode 100644 (file)
index 0000000..877b517
--- /dev/null
@@ -0,0 +1,206 @@
+From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 7 Jan 2013 17:45:39 +0100
+Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
+ arch/mips/bcm63xx/dev-flash.c                      |    2 +-
+ arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
+ .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
+ 7 files changed, 104 insertions(+), 8 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
+                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
+-                 pci-ath9k-fixup.o usb-common.o
++                 pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -34,6 +34,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ #include <uapi/linux/bcm933xx_hcs.h>
+ #include <uapi/linux/bcm963xx_tag.h>
+@@ -1065,9 +1066,19 @@ int __init board_register_devices(void)
+       }
+       /* register any fixups */
+-      for (i = 0; i < board.has_caldata; i++)
+-              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-                      board.caldata[i].endian_check, board.caldata[i].led_pin);
++      for (i = 0; i < board.has_caldata; i++) {
++              switch (board.caldata[i].vendor) {
++              case PCI_VENDOR_ID_ATHEROS:
++                      pci_enable_ath9k_fixup(board.caldata[i].slot,
++                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
++                              board.caldata[i].led_pin);
++                      break;
++              case PCI_VENDOR_ID_RALINK:
++                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
++                              board.caldata[i].eeprom);
++                      break;
++              }
++      }
+       return 0;
+ }
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -193,7 +193,7 @@ void __init bcm63xx_flash_detect(void)
+       }
+ }
+-int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
++int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
+ {
+       u32 val;
+       unsigned int i;
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
+@@ -0,0 +1,72 @@
++/*
++ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
++ *
++ *  Based on
++ *
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/if_ether.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++#include <bcm63xx_nvram.h>
++#include <pci_rt2x00_fixup.h>
++
++struct rt2x00_fixup {
++      unsigned slot;
++      u8 mac[ETH_ALEN];
++      struct rt2x00_platform_data pdata;
++};
++
++static int rt2x00_num_fixups;
++static struct rt2x00_fixup rt2x00_fixups[2] = {
++      {
++              .slot = 255,
++      },
++      {
++              .slot = 255,
++      },
++};
++
++static void rt2x00_pci_fixup(struct pci_dev *dev)
++{
++      unsigned i;
++      struct rt2x00_platform_data *pdata = NULL;
++
++      for (i = 0; i < rt2x00_num_fixups; i++) {
++              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
++                      continue;
++
++              pdata = &rt2x00_fixups[i].pdata;
++              break;
++      }
++
++      dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
++
++void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
++{
++      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
++              return;
++
++      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
++      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++
++      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
++              return;
++
++      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
++      rt2x00_num_fixups++;
++}
++
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -11,7 +11,7 @@ enum {
+ void bcm63xx_flash_detect(void);
+-int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
++int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
+ int bcm63xx_flash_get_type(void);
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -9,6 +9,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_dev_dsp.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ /*
+  * flash mapping
+@@ -16,11 +17,15 @@
+ #define BCM963XX_CFE_VERSION_OFFSET   0x570
+ #define BCM963XX_NVRAM_OFFSET         0x580
+-struct ath9k_caldata {
++struct bcm63xx_caldata {
++      unsigned int    vendor;
+       unsigned int    slot;
+       u32             caldata_offset;
++      /* Atheros */
+       unsigned int    endian_check:1;
+       int             led_pin;
++      /* Ralink */
++      char*           eeprom;
+ };
+ /*
+@@ -45,7 +50,7 @@ struct board_info {
+       unsigned int    has_caldata:2;
+       /* wifi calibration data config */
+-      struct ath9k_caldata caldata[2];
++      struct bcm63xx_caldata caldata[2];
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+@@ -0,0 +1,9 @@
++#ifndef _PCI_RT2X00_FIXUP
++#define _PCI_RT2X00_FIXUP
++
++#define PCI_VENDOR_ID_RALINK 0x1814
++
++void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
++
++#endif /* _PCI_RT2X00_FIXUP */
++
diff --git a/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
new file mode 100644 (file)
index 0000000..271119c
--- /dev/null
@@ -0,0 +1,169 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -336,6 +336,9 @@ struct bcm_enet_priv {
+       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+       int sw_port_link[ENETSW_MAX_PORT];
++      /* platform device for associated switch */
++      struct platform_device *b53_device;
++
+       /* used to poll switch port state */
+       struct timer_list swphy_poll;
+       spinlock_t enetsw_mdio_lock;
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/if_vlan.h>
++#include <linux/platform_data/b53.h>
+ #include <bcm63xx_dev_enet.h>
+ #include "bcm63xx_enet.h"
+@@ -1978,7 +1979,8 @@ static int bcm_enet_remove(struct platfo
+       return 0;
+ }
+-struct platform_driver bcm63xx_enet_driver = {
++
++static struct platform_driver bcm63xx_enet_driver = {
+       .probe  = bcm_enet_probe,
+       .remove = bcm_enet_remove,
+       .driver = {
+@@ -1987,6 +1989,42 @@ struct platform_driver bcm63xx_enet_driv
+       },
+ };
++struct b53_platform_data bcm63xx_b53_pdata = {
++      .chip_id = 0x6300,
++      .big_endian = 1,
++};
++
++struct platform_device bcm63xx_b53_dev = {
++      .name           = "b53-switch",
++      .id             = -1,
++      .dev            = {
++              .platform_data = &bcm63xx_b53_pdata,
++      },
++};
++
++static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
++{
++      int ret;
++
++      bcm63xx_b53_pdata.regs = priv->base;
++      bcm63xx_b53_pdata.enabled_ports = port_mask;
++      bcm63xx_b53_pdata.alias = priv->net_dev->name;
++
++      ret = platform_device_register(&bcm63xx_b53_dev);
++      if (!ret)
++              priv->b53_device = &bcm63xx_b53_dev;
++
++      return ret;
++}
++
++static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
++{
++      if (priv->b53_device)
++              platform_device_unregister(&bcm63xx_b53_dev);
++
++      priv->b53_device = NULL;
++}
++
+ /*
+  * switch mii access callbacks
+  */
+@@ -2240,29 +2278,6 @@ static int bcm_enetsw_open(struct net_de
+               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
+       }
+-      /* reset mib */
+-      val = enetsw_readb(priv, ENETSW_GMCR_REG);
+-      val |= ENETSW_GMCR_RST_MIB_MASK;
+-      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-      mdelay(1);
+-      val &= ~ENETSW_GMCR_RST_MIB_MASK;
+-      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-      mdelay(1);
+-
+-      /* force CPU port state */
+-      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
+-      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
+-      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
+-
+-      /* enable switch forward engine */
+-      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
+-      val |= ENETSW_SWMODE_FWD_EN_MASK;
+-      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
+-
+-      /* enable jumbo on all ports */
+-      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
+-      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
+-
+       /* initialize flow control buffer allocation */
+       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
+                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
+@@ -2722,6 +2737,9 @@ static int bcm_enetsw_probe(struct platf
+       struct bcm63xx_enetsw_platform_data *pd;
+       struct resource *res_mem;
+       int ret, irq_rx, irq_tx;
++      unsigned i, num_ports = 0;
++      u16 port_mask = BIT(8);
++      u8 val;
+       /* stop if shared driver failed, assume driver->probe will be
+        * called in the same order we register devices (correct ?)
+@@ -2811,6 +2829,43 @@ static int bcm_enetsw_probe(struct platf
+       priv->pdev = pdev;
+       priv->net_dev = dev;
++      /* reset mib */
++      val = enetsw_readb(priv, ENETSW_GMCR_REG);
++      val |= ENETSW_GMCR_RST_MIB_MASK;
++      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++      mdelay(1);
++      val &= ~ENETSW_GMCR_RST_MIB_MASK;
++      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++      mdelay(1);
++
++      /* force CPU port state */
++      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
++      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
++      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
++
++      /* enable switch forward engine */
++      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
++      val |= ENETSW_SWMODE_FWD_EN_MASK;
++      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
++
++      /* enable jumbo on all ports */
++      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
++      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
++
++      for (i = 0; i < priv->num_ports; i++) {
++              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
++
++              if (!port->used)
++                      continue;
++
++              num_ports++;
++              port_mask |= BIT(i);
++      }
++
++      /* only register if there is more than one external port */
++      if (num_ports > 1)
++              bcmenet_switch_register(priv, port_mask);
++
+       return 0;
+ out_put_clk:
+@@ -2839,6 +2894,9 @@ static int bcm_enetsw_remove(struct plat
+       priv = netdev_priv(dev);
+       unregister_netdev(dev);
++      /* remove switch */
++      bcmenet_switch_unregister(priv);
++
+       /* release device resources */
+       iounmap(priv->base);
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
new file mode 100644 (file)
index 0000000..24dd27a
--- /dev/null
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2784,12 +2784,6 @@ static int bcm_enetsw_probe(struct platf
+       if (ret)
+               goto out;
+-      if (!request_mem_region(res_mem->start, resource_size(res_mem),
+-                              "bcm63xx_enetsw")) {
+-              ret = -EBUSY;
+-              goto out;
+-      }
+-
+       priv->base = ioremap(res_mem->start, resource_size(res_mem));
+       if (priv->base == NULL) {
+               ret = -ENOMEM;
diff --git a/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch b/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch
new file mode 100644 (file)
index 0000000..ffeb8c9
--- /dev/null
@@ -0,0 +1,67 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -555,6 +555,56 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++
++static struct board_info __initdata board_96348_D4PW = {
++      .name                           = "D-4P-W",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .has_uart0                      = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "D-4P-W:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "D-4P-W::status",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "D-4P-W:green:internet",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "D-4P-W:red:internet",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 7,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -733,6 +783,7 @@ static const struct board_info __initcon
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
++      &board_96348_D4PW,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch
new file mode 100644 (file)
index 0000000..3a7fee1
--- /dev/null
@@ -0,0 +1,661 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -15,6 +15,10 @@
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++#if 0 /* FIXME: 3.14 removed non-DT support */
++#include <linux/spi/74x164.h>
++#endif
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -49,6 +53,12 @@
+ #define CFE_OFFSET_64K                        0x10000
+ #define CFE_OFFSET_128K                       0x20000
++#define NB4_PID_OFFSET                0xff80
++#define NB4_74X164_GPIO_BASE  64
++#define NB4_SPI_GPIO_MOSI     7
++#define NB4_SPI_GPIO_CLK      6
++#define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
++
+ static struct board_info board;
+ /*
+@@ -755,6 +765,605 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++
++struct spi_gpio_platform_data nb4_spi_gpio_data = {
++      .sck            = NB4_SPI_GPIO_CLK,
++      .mosi           = NB4_SPI_GPIO_MOSI,
++      .miso           = SPI_GPIO_NO_MISO,
++      .num_chipselect = 1,
++};
++
++
++static struct platform_device nb4_spi_gpio = {
++      .name = "spi_gpio",
++      .id   = 1,
++      .dev = {
++              .platform_data = &nb4_spi_gpio_data,
++      },
++};
++
++static struct platform_device * __initdata nb4_devices[] = {
++      &nb4_spi_gpio,
++};
++
++#if 0 /* FIXME: 3.14 removed non-DT support */
++const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
++      .base = NB4_74X164_GPIO_BASE
++};
++#endif
++
++static struct spi_board_info nb4_spi_devices[] = {
++#if 0 /* FIXME: 3.14 removed non-DT support */
++      {
++              .modalias = "74x164",
++              .max_speed_hz = 781000,
++              .bus_num = 1,
++              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++              .mode = SPI_MODE_0,
++              .platform_data = &nb4_74x164_platform_data
++      }
++#endif
++};
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++      .name                           = "NB4-SER-r0",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .leds = {
++              {
++                      .name           = "NB4-SER-r0:white:adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:white:traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:white:tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:white:tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:white:wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:white:alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:red:service",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:green:service",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r0:blue:service",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "service",
++                      .gpio           = 27,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "clip",
++                      .gpio           = 31,
++                      .type           = EV_KEY,
++                      .code           = BTN_1,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r1 = {
++      .name                           = "NB4-SER-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .leds = {
++              {
++                      .name           = "NB4-SER-r1:white:adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:white:traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:white:tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:white:tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:white:wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:white:alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:red:service",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:green:service",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r1:blue:service",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "service",
++                      .gpio           = 27,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "clip",
++                      .gpio           = 31,
++                      .type           = EV_KEY,
++                      .code           = BTN_1,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r2 = {
++      .name                           = "NB4-SER-r2",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .leds = {
++              {
++                      .name           = "NB4-SER-r2:white:adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:white:traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:white:tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:white:tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:white:wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:white:alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:red:service",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:green:service",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-SER-r2:blue:service",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "service",
++                      .gpio           = 27,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "clip",
++                      .gpio           = 31,
++                      .type           = EV_KEY,
++                      .code           = BTN_1,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++      .name                           = "NB4-FXC-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .leds = {
++              {
++                      .name           = "NB4-FXC-r1:white:adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r1:white:traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "NB4-FXC-r1:white:tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r1:white:tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r1:white:wifi",
++                      .gpio           = 15,
++              },
++              {
++                      .name           = "NB4-FXC-r1:white:alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r1:red:service",
++                      .gpio           = 29,
++              },
++              {
++                      .name           = "NB4-FXC-r1:green:service",
++                      .gpio           = 30,
++              },
++              {
++                      .name           = "NB4-FXC-r1:blue:service",
++                      .gpio           = 4,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "service",
++                      .gpio           = 27,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "clip",
++                      .gpio           = 31,
++                      .type           = EV_KEY,
++                      .code           = BTN_1,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r2 = {
++      .name                           = "NB4-FXC-r2",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .leds = {
++              {
++                      .name           = "NB4-FXC-r2:white:adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r2:white:traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "NB4-FXC-r2:white:tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r2:white:tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r2:white:wifi",
++                      .gpio           = 15,
++              },
++              {
++                      .name           = "NB4-FXC-r2:white:alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "NB4-FXC-r2:red:service",
++                      .gpio           = 29,
++              },
++              {
++                      .name           = "NB4-FXC-r2:green:service",
++                      .gpio           = 30,
++              },
++              {
++                      .name           = "NB4-FXC-r2:blue:service",
++                      .gpio           = 4,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "service",
++                      .gpio           = 27,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "clip",
++                      .gpio           = 31,
++                      .type           = EV_KEY,
++                      .code           = BTN_1,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
+ #endif
+ /*
+@@ -791,6 +1400,11 @@ static const struct board_info __initcon
+       &board_96358vw2,
+       &board_AGPFS0,
+       &board_DWVS0,
++      &board_nb4_ser_r0,
++      &board_nb4_ser_r1,
++      &board_nb4_ser_r2,
++      &board_nb4_fxc_r1,
++      &board_nb4_fxc_r2,
+ #endif
+ };
+@@ -845,6 +1459,16 @@ static void __init boardid_fixup(u8 *boo
+       struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
+       char *board_name = (char *)bcm63xx_nvram_get_name();
++      if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
++              u8 *p = boot_addr + NB4_PID_OFFSET;
++
++              /* Extract nb4 PID */
++              if (!memcmp(p, "NB4-", 4)) {
++                      memcpy(board_name, p, sizeof("NB4-XXX-rX"));
++                      return;
++              }
++      }
++
+       /* check if bcm_tag is at 64k offset */
+       if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
+               /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch
new file mode 100644 (file)
index 0000000..7a542cf
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -228,6 +228,40 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96338w2_e7t = {
++      .name                           = "96338W2_E7T",
++      .expected_cpu_id                = 0x6338,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++              .leds = {
++              {
++                      .name           = "96338W2_E7T:green:ppp",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96338W2_E7T:green:ppp-fail",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96338W2_E7T:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++
++              },
++      },
++};
+ #endif
+ /*
+@@ -1379,6 +1413,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+       &board_96338w,
++      &board_96338w2_e7t,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch
new file mode 100644 (file)
index 0000000..bc23463
--- /dev/null
@@ -0,0 +1,109 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -756,6 +756,98 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_CPVA642 = {
++      .name                           = "CPVA642",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "CPVA642:red:power",
++                      .gpio           = 14,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:power",
++                      .gpio           = 11,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "CPVA642:red:wifi",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:wifi",
++                      .gpio           = 28,
++                      .active_low     = 0,
++              },
++              {
++                      .name           = "CPVA642:red:link",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:link",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:ether",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:phone1",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:phone2",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA642:green:usb",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++    },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
++
+ static struct board_info __initdata board_AGPFS0 = {
+       .name                           = "AGPF-S0",
+       .expected_cpu_id                = 0x6358,
+@@ -1434,6 +1526,7 @@ static const struct board_info __initcon
+       &board_96358vw,
+       &board_96358vw2,
+       &board_AGPFS0,
++      &board_CPVA642,
+       &board_DWVS0,
+       &board_nb4_ser_r0,
+       &board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch
new file mode 100644 (file)
index 0000000..c52e311
--- /dev/null
@@ -0,0 +1,72 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -892,6 +892,61 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++/* D-Link DSL-274xB revison C2/C3 */
++static struct board_info __initdata board_dsl_274xb_rev_c = {
++      .name                           = "AW4139",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "dsl-274xb:green:power",
++                      .gpio           = 5,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "dsl-274xb:red:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:adsl",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:internet",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "dsl-274xb:red:internet",
++                      .gpio           = 10,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ struct spi_gpio_platform_data nb4_spi_gpio_data = {
+       .sck            = NB4_SPI_GPIO_CLK,
+       .mosi           = NB4_SPI_GPIO_MOSI,
+@@ -1528,6 +1583,7 @@ static const struct board_info __initcon
+       &board_AGPFS0,
+       &board_CPVA642,
+       &board_DWVS0,
++      &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_ser_r1,
+       &board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch
new file mode 100644 (file)
index 0000000..986d4db
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -649,6 +649,67 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_spw500v = {
++      .name                           = "SPW500V",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .has_dsp                        = 1,
++      .dsp = {
++              .gpio_rst               = 6,
++              .gpio_int               = 34,
++              .ext_irq                = 2,
++              .cs                     = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "SPW500V:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "SPW500V:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "SPW500V:green:ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {       .name           = "SPW500V:green:pstn",
++                      .gpio           = 28,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "SPW500V:green:voip",
++                      .gpio           = 32,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -1575,6 +1636,7 @@ static const struct board_info __initcon
+       &board_96348gw_a,
+       &board_rta1025w_16,
+       &board_96348_D4PW,
++      &board_spw500v,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch
new file mode 100644 (file)
index 0000000..108a354
--- /dev/null
@@ -0,0 +1,124 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -516,6 +516,112 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_gw6200 = {
++      .name                           = "GW6200",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .has_dsp                        = 1,
++              .dsp = {
++              .gpio_rst               = 8, /* FIXME: What is real GPIO here? */
++              .gpio_int               = 34,
++              .ext_irq                = 2,
++              .cs                     = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "GW6200:green:line1",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "GW6200:green:line2",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "GW6200:green:line3",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "GW6200:green:tel",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
++static struct board_info __initdata board_gw6000 = {
++      .name                           = "GW6000",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .has_dsp                        = 1,
++      .dsp = {
++              .gpio_rst               = 6,
++              .gpio_int               = 34,
++              .ext_irq                = 2,
++              .cs                     = 2,
++      },
++
++      /* GW6000 has no GPIO-controlled leds */
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
++
++
+ static struct board_info __initdata board_FAST2404 = {
+       .name                           = "F@ST2404",
+       .expected_cpu_id                = 0x6348,
+@@ -1629,6 +1735,8 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+       &board_96348gw,
++      &board_gw6000,
++      &board_gw6200,
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch
new file mode 100644 (file)
index 0000000..465f3d3
--- /dev/null
@@ -0,0 +1,89 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -816,6 +816,78 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96348sv = {
++      .name                           = "MAGIC",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              /* it has BP_ENET_EXTERNAL_PHY */
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++      .has_ehci0                      = 1,
++
++      .has_dsp                        = 1,
++      .dsp = {
++              .gpio_rst               = 25,
++              .gpio_int               = 34,
++              .cs                     = 2,
++              .ext_irq                = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "MAGIC:green:voip",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "MAGIC:green:adsl",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "MAGIC:green:wifi",
++                      .gpio           = 28,
++              },
++              {
++                      .name           = "MAGIC:green:usb",
++                      .gpio           = 35,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "MAGIC:green:hpna",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "MAGIC:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "MAGIC:green:stop",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ /*
+@@ -1745,6 +1817,7 @@ static const struct board_info __initcon
+       &board_rta1025w_16,
+       &board_96348_D4PW,
+       &board_spw500v,
++      &board_96348sv,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch
new file mode 100644 (file)
index 0000000..6247251
--- /dev/null
@@ -0,0 +1,94 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1784,6 +1784,83 @@ static struct board_info __initdata boar
+       .spis = nb4_spi_devices,
+       .num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
++
++static struct board_info __initdata board_HW553 = {
++      .name                           = "HW553",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .leds = {
++              {
++                      .name           = "HW553:red:lan",
++                      .gpio           = 34,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:blue:lan",
++                      .gpio           = 35,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:red:adsl",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:blue:adsl",
++                      .gpio           = 23,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:red:power",
++                      .gpio           = 5,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++
++              {
++                      .name           = "HW553:blue:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:red:wifi",
++                      .gpio           = 25,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:red:internetkey",
++                      .gpio           = 12,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "HW553:blue:internetkey",
++                      .gpio           = 13,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ /*
+@@ -1832,6 +1909,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r2,
+       &board_nb4_fxc_r1,
+       &board_nb4_fxc_r2,
++      &board_HW553,
+ #endif
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch
new file mode 100644 (file)
index 0000000..499922c
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -262,6 +262,45 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_rta1320_16m = {
++      .name                           = "RTA1320_16M",
++      .expected_cpu_id                = 0x6338,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++              .leds = {
++              {
++                      .name           = "RTA1320_16M:green:adsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA1320_16M:green:ppp",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA1320_16M:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "RTA1320_16M:green:stop",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ /*
+@@ -1877,6 +1916,7 @@ static const struct board_info __initcon
+       &board_96338gw,
+       &board_96338w,
+       &board_96338w2_e7t,
++      &board_rta1320_16m,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch b/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch
new file mode 100644 (file)
index 0000000..dd3366c
--- /dev/null
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1900,6 +1900,72 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++      .name                   = "96358-502V",
++      .expected_cpu_id        = 0x6358,
++
++      .has_uart0              = 1,
++      .has_enet0              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "spw303v:green:power+adsl",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:red:power+adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:ppp",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:ses",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:voip",
++                      .gpio           = 27,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:pots",
++                      .gpio           = 31,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 11,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "ses",
++                      .gpio           = 37,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      }
++};
+ #endif
+ /*
+@@ -1950,6 +2016,7 @@ static const struct board_info __initcon
+       &board_nb4_fxc_r1,
+       &board_nb4_fxc_r2,
+       &board_HW553,
++      &board_spw303v,
+ #endif
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch
new file mode 100644 (file)
index 0000000..783770e
--- /dev/null
@@ -0,0 +1,123 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -927,6 +927,65 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_V2500V_BB = {
++      .name                           = "V2500V_BB",
++        .expected_cpu_id                = 0x6348,
++
++        .has_uart0                      = 1,
++        .has_enet0                      = 1,
++        .has_enet1                      = 1,
++        .has_pci                        = 1,
++
++        .enet0 = {
++                .has_phy                = 1,
++                .use_internal_phy       = 1,
++        },
++        .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++                .force_speed_100        = 1,
++                .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "V2500V_BB:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "V2500V_BB:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2500V_BB:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {       .name           = "V2500V_BB:green:ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2500V_BB:green:wireless",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 31,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -2001,6 +2060,7 @@ static const struct board_info __initcon
+       &board_96348_D4PW,
+       &board_spw500v,
+       &board_96348sv,
++      &board_V2500V_BB,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -2122,6 +2182,22 @@ void __init board_prom_init(void)
+               val &= MPI_CSBASE_BASE_MASK;
+       }
+       boot_addr = (u8 *)KSEG1ADDR(val);
++      printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
++
++      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
++      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
++      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
++      /* Do an early check of CFE and then select bank 0 */
++
++      if (boot_addr == (u8 *)0xbf800000) {
++              u8 *tmp_boot_addr = (u8*)0xbfc00000;
++
++              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
++              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
++                      printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
++                      boot_addr = tmp_boot_addr;
++              }
++      }
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -19,6 +19,7 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+ #include <bcm63xx_dev_hsspi.h>
+@@ -207,6 +208,13 @@ int __init bcm63xx_flash_register(int nu
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+               val &= MPI_CSBASE_BASE_MASK;
++              /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++              /* Loading from CFE always uses Bank 0 */
++              if (!strcmp(board_get_name(), "V2500V_BB")) {
++                      pr_info("V2500V: Start in Bank 0\n");
++                      val = val + 0x400000; // Select Bank 0 start address
++              }
++
+               mtd_resources[0].start = val;
+               mtd_resources[0].end = 0x1FFFFFFF;
diff --git a/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch
new file mode 100644 (file)
index 0000000..54a33ba
--- /dev/null
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -487,6 +487,64 @@ static struct board_info __initdata boar
+       },
+ };
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++      .name                           = "V2110",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "V2110:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "V2110:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {       .name           = "V2110:green:ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:wireless",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -2061,6 +2119,7 @@ static const struct board_info __initcon
+       &board_spw500v,
+       &board_96348sv,
+       &board_V2500V_BB,
++      &board_V2110,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/513-board_livebox.patch b/target/linux/brcm63xx/patches-3.14/513-board_livebox.patch
new file mode 100644 (file)
index 0000000..2323b5e
--- /dev/null
@@ -0,0 +1,390 @@
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -8,4 +8,10 @@ config BOARD_BCM963XX
+       select SSB
+        help
++config BOARD_LIVEBOX
++      bool "Inventel Livebox(es) boards"
++      select SSB
++      help
++       Inventel Livebox boards using the RedBoot bootloader.
++
+ endchoice
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,369 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/ssb/ssb.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/spi/spi.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_dsp.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_spi.h>
++#include <board_bcm963xx.h>
++
++#define PFX   "board_livebox: "
++
++#define LIVEBOX_KEYS_POLL_INTERVAL    20
++#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL        (LIVEBOX_KEYS_POLL_INTERVAL * 3)
++
++static unsigned int mac_addr_used = 0;
++static struct board_info board;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox_blue5g = {
++      .name                           = "Livebox-blue-5g",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++                .has_phy              = 1,
++                .phy_id               = 31,
++      },
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++
++      .has_dsp                        = 0, /*TODO some Liveboxes have dsp*/
++      .dsp = {
++              .gpio_rst               = 6, /*FIXME eth1 shares gpio6 with dsp?*/
++              .gpio_int               = 35,
++              .cs                     = 2,
++              .ext_irq                = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "Livebox-blue-5g::adsl-fail",
++                      .gpio           = 0,
++                      .active_low     = 0,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "Livebox-blue-5g::adsl",
++                      .gpio           = 1,
++              },
++              {
++                      .name           = "Livebox-blue-5g::traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "Livebox-blue-5g::phone",
++                      .gpio           = 3,
++              },
++              {
++                      .name           = "Livebox-blue-5g::wifi",
++                      .gpio           = 4,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "BTN_1",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = BTN_1,
++                      .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "BTN_2",
++                      .gpio           = 7,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = BTN_2,
++                      .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++              },
++
++      },
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++      &board_livebox_blue5g
++#endif
++};
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++      return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++static int board_get_mac_address(u8 *mac)
++{
++      u8 *p;
++      int count;
++
++      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
++
++      p = mac + ETH_ALEN - 1;
++      count = mac_addr_used;
++
++      while (count--) {
++              do {
++                      (*p)++;
++                      if (*p != 0)
++                              break;
++                      p--;
++              } while (p != mac);
++      }
++
++      if (p == mac) {
++              printk(KERN_ERR PFX "unable to fetch mac address\n");
++              return -ENODEV;
++      }
++        mac_addr_used++;
++
++      return 0;
++}
++
++/*
++ * early init callback
++ */
++#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
++#define LIVEBOX_BOOT_ADDR             0x1e400000
++
++#define LIVEBOX_HW_BLUE5G_9           0x90
++
++void __init board_prom_init(void)
++{
++      u32 val;
++      u8 hw_version;
++
++      /* Get hardware version */
++      val = bcm_gpio_readl(GPIO_CTL_LO_REG);
++      val &= ~LIVEBOX_GPIO_DETECT_MASK;
++      bcm_gpio_writel(val, GPIO_CTL_LO_REG);
++
++      hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
++      switch (hw_version) {
++      case LIVEBOX_HW_BLUE5G_9:
++              printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
++              memcpy(&board, bcm963xx_boards[0], sizeof(board));
++              break;
++      default:
++              printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
++              break;
++      }
++
++      /* use default livebox configuration */
++      memcpy(&board, bcm963xx_boards[0], sizeof(board));
++
++      /* setup pin multiplexing depending on board enabled device,
++       * this has to be done this early since PCI init is done
++       * inside arch_initcall */
++      val = 0;
++
++#ifdef CONFIG_PCI
++      if (board.has_pci) {
++              bcm63xx_pci_enabled = 1;
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G2_PCI;
++      }
++#endif
++      if (board.has_pccard) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
++      }
++
++      if (board.has_enet0 && !board.enet0.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      if (board.has_enet1 && !board.enet1.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++                      printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
++                      gpio_request(6, "dsp_eth_rst");
++                      gpio_direction_output(6, 0);
++                      gpio_set_value(6, 1);
++      }
++
++      bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++      if (!board.name[0])
++              panic("unable to detect bcm963xx board");
++      printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++      /* make sure we're running on expected cpu */
++      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++              panic("unexpected CPU for bcm963xx board");
++}
++
++static struct physmap_flash_data flash_data = {
++      .width                  = 2,
++};
++
++static struct resource mtd_resources[] = {
++      {
++              .start          = 0,    /* filled at runtime */
++              .end            = 0,    /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      }
++};
++
++static struct platform_device mtd_dev = {
++      .name                   = "physmap-flash",
++      .resource               = mtd_resources,
++      .num_resources          = ARRAY_SIZE(mtd_resources),
++      .dev                    = {
++              .platform_data  = &flash_data,
++      },
++};
++
++static struct gpio_led_platform_data bcm63xx_led_data;
++
++static struct platform_device bcm63xx_gpio_leds = {
++      .name                   = "leds-gpio",
++      .id                     = 0,
++      .dev.platform_data      = &bcm63xx_led_data,
++};
++
++static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
++      .poll_interval  = LIVEBOX_KEYS_POLL_INTERVAL,
++};
++
++static struct platform_device bcm63xx_gpio_keys_device = {
++      .name           = "gpio-keys-polled",
++      .id             = 0,
++      .dev.platform_data = &bcm63xx_gpio_keys_data,
++};
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++      u32 val;
++      int led_count = 0;
++      int button_count = 0;
++
++      if (board.has_uart0)
++              bcm63xx_uart_register(0);
++
++      if (board.has_uart1)
++              bcm63xx_uart_register(1);
++
++      if (board.has_pccard)
++              bcm63xx_pcmcia_register();
++
++      if (board.has_enet0 &&
++          !board_get_mac_address(board.enet0.mac_addr))
++              bcm63xx_enet_register(0, &board.enet0);
++
++      if (board.has_enet1 &&
++          !board_get_mac_address(board.enet1.mac_addr))
++              bcm63xx_enet_register(1, &board.enet1);
++
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
++      if (board.has_dsp)
++              bcm63xx_dsp_register(&board.dsp);
++
++      bcm63xx_spi_register();
++
++      if (board.num_devs)
++              platform_add_devices(board.devs, board.num_devs);
++
++      if (board.num_spis)
++              spi_register_board_info(board.spis, board.num_spis);
++
++
++      /* read base address of boot chip select (0) */
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
++      if (val != LIVEBOX_BOOT_ADDR)
++              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
++                      val, LIVEBOX_BOOT_ADDR);
++      mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
++      mtd_resources[0].end = 0x1ebfffff;
++
++      platform_device_register(&mtd_dev);
++
++      /* count number of LEDs defined by this device */
++      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++              led_count++;
++
++      bcm63xx_led_data.num_leds = led_count;
++      bcm63xx_led_data.leds = board.leds;
++
++      platform_device_register(&bcm63xx_gpio_leds);
++
++      /* count number of BUTTONs defined by this device */
++      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++              button_count++;
++
++      if (button_count) {
++              bcm63xx_gpio_keys_data.nbuttons = button_count;
++              bcm63xx_gpio_keys_data.buttons = board.buttons;
++
++              platform_device_register(&bcm63xx_gpio_keys_device);
++      }
++
++      return 0;
++}
diff --git a/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch
new file mode 100644 (file)
index 0000000..5713ed6
--- /dev/null
@@ -0,0 +1,62 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -545,6 +545,51 @@ static struct board_info __initdata boar
+ };
++static struct board_info __initdata board_ct536_ct5621 = {
++      .name                           = "CT536_CT5621",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 0,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "CT536_CT5621:green:adsl-fail",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT536_CT5621:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -2120,6 +2165,7 @@ static const struct board_info __initcon
+       &board_96348sv,
+       &board_V2500V_BB,
+       &board_V2110,
++      &board_ct536_ct5621,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch
new file mode 100644 (file)
index 0000000..9f011d6
--- /dev/null
@@ -0,0 +1,19 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1315,6 +1315,8 @@ static struct board_info __initdata boar
+       .name                           = "DWV-S0",
+       .expected_cpu_id                = 0x6358,
++      .has_uart0                      = 1,
++
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -1330,6 +1332,7 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
+ };
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch
new file mode 100644 (file)
index 0000000..1a295db
--- /dev/null
@@ -0,0 +1,80 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -590,6 +590,69 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96348A_122 = {
++      .name                           = "96348A-122",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "96348A-122:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "96348A-122:red:alarm",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96348A-122:green:wps",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wlan",
++                      .gpio           = 34,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_WLAN,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 35,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -2169,6 +2232,7 @@ static const struct board_info __initcon
+       &board_V2500V_BB,
+       &board_V2110,
+       &board_ct536_ct5621,
++      &board_96348A_122,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch
new file mode 100644 (file)
index 0000000..3a8706c
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -855,6 +855,7 @@ static struct board_info __initdata boar
+       .name                           = "RTA1025W_16",
+       .expected_cpu_id                = 0x6348,
++      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
diff --git a/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
new file mode 100644 (file)
index 0000000..98086c9
--- /dev/null
@@ -0,0 +1,57 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1153,6 +1153,46 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_CPVA502plus = {
++      .name                           = "CPVA502+",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "CPVA502+:green:phone",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA502+:green:link",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++};
++
+ #endif
+ /*
+@@ -2234,6 +2274,7 @@ static const struct board_info __initcon
+       &board_V2110,
+       &board_ct536_ct5621,
+       &board_96348A_122,
++      &board_CPVA502plus,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
new file mode 100644 (file)
index 0000000..524cd97
--- /dev/null
@@ -0,0 +1,135 @@
+From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Wed, 20 Jan 2010 16:21:30 +0100
+Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
+ 2 files changed, 97 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2238,6 +2238,85 @@ static struct board_info __initdata boar
+ #endif
+ /*
++ * known 6368 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_96368mvwg = {
++      .name                           = "96368MVWG",
++      .expected_cpu_id                = 0x6368,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port1",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port2",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0x12,
++                              .name   = "port0",
++                      },
++
++                      [5] = {
++                              .used   = 1,
++                              .phy_id = 0x11,
++                              .name   = "port3",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "96368MVWG:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96368MVWG:green:ppp",
++                      .gpio           = 5,
++              },
++              {
++                      .name           = "96368MVWG:green:power",
++                      .gpio           = 22,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "96368MVWG:green:wps",
++                      .gpio           = 23,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96368MVWG:red:ppp-fail",
++                      .gpio           = 31,
++              },
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
++#endif
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -2292,6 +2371,10 @@ static const struct board_info __initcon
+       &board_HW553,
+       &board_spw303v,
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_6368
++      &board_96368mvwg,
++#endif
+ };
+ /*
+@@ -2473,12 +2556,25 @@ void __init board_prom_init(void)
+               bcm63xx_pci_enabled = 1;
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G2_PCI;
++
++              if (BCMCPU_IS_6368())
++                      val |= GPIO_MODE_6368_PCI_REQ1 |
++                              GPIO_MODE_6368_PCI_GNT1 |
++                              GPIO_MODE_6368_PCI_INTB |
++                              GPIO_MODE_6368_PCI_REQ0 |
++                              GPIO_MODE_6368_PCI_GNT0;
+       }
+ #endif
+       if (board.has_pccard) {
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
++
++              if (BCMCPU_IS_6368())
++                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
++                              GPIO_MODE_6368_PCMCIA_CD2 |
++                              GPIO_MODE_6368_PCMCIA_VS1 |
++                              GPIO_MODE_6368_PCMCIA_VS2;
+       }
+       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
new file mode 100644 (file)
index 0000000..9fac033
--- /dev/null
@@ -0,0 +1,92 @@
+From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 4 Nov 2011 12:33:48 +0100
+Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
+ 1 files changed, 67 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2314,6 +2314,72 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
+ };
++
++static struct board_info __initdata board_96368mvngr = {
++      .name                           = "96368MVNgr",
++      .expected_cpu_id                = 0x6368,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "96368MVNgr:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96368MVNgr:green:inet",
++                      .gpio           = 5,
++              },
++              {
++                      .name           = "96368MVNgr:green:power",
++                      .gpio           = 22,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "96368MVNgr:green:wps",
++                      .gpio           = 23,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96368MVNgr:green:inet-fail",
++                      .gpio           = 3,
++              },
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
+ #endif
+ /*
+@@ -2374,6 +2440,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
++      &board_96368mvngr,
+ #endif
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
new file mode 100644 (file)
index 0000000..689e370
--- /dev/null
@@ -0,0 +1,67 @@
+From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 10:52:25 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
+ 1 files changed, 77 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -110,13 +110,45 @@ static struct board_info __initdata boar
+               .port_no                = 0,
+       },
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
+       .leds = {
+               {
+-                      .name           = "96328avng::ppp-fail",
++                      .name           = "96328avng::internet-fail",
+                       .gpio           = 2,
+                       .active_low     = 1,
+               },
+               {
++                      .name           = "96328avng::dsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
+                       .name           = "96328avng::power",
+                       .gpio           = 4,
+                       .active_low     = 1,
+@@ -133,7 +165,7 @@ static struct board_info __initdata boar
+                       .active_low     = 1,
+               },
+               {
+-                      .name           = "96328avng::ppp",
++                      .name           = "96328avng::internet",
+                       .gpio           = 11,
+                       .active_low     = 1,
+               },
diff --git a/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
new file mode 100644 (file)
index 0000000..92a4347
--- /dev/null
@@ -0,0 +1,96 @@
+From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 11:01:12 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
+ 1 files changed, 71 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -171,6 +171,76 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_963281TAN = {
++      .name                           = "963281TAN",
++      .expected_cpu_id                = 0x6328,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "963281TAN::internet",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963281TAN::power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "963281TAN::internet-fail",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963281TAN::power-fail",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963281TAN::wps",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963281TAN::dsl",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++
++      },
++};
+ #endif
+ /*
+@@ -2423,6 +2493,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_963281TAN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch
new file mode 100644 (file)
index 0000000..9d7d96e
--- /dev/null
@@ -0,0 +1,132 @@
+From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 30 Apr 2012 09:10:51 +0200
+Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
+ DSL-274xB rev F1
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
+ 1 files changed, 104 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -241,6 +241,111 @@ static struct board_info __initdata boar
+       },
+ };
++
++static struct board_info __initdata board_dsl_274xb_f1 = {
++      .name                           = "AW4339U",
++      .expected_cpu_id                = 0x6328,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor         = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset = 0x7d1000,
++                      .slot           = 0,
++                      .led_pin        = -1,
++              },
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 1",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "dsl-274xb:red:internet",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:dsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "dsl-274xb:red:power",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:blue:wps",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:internet",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "wifi",
++                      .gpio           = 10,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "reset",
++                      .gpio           = 23,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 24,
++                      .active_low     = 1,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -2494,6 +2599,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch b/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch
new file mode 100644 (file)
index 0000000..3cec302
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1400,6 +1400,59 @@ static struct board_info __initdata boar
+       },
+ };
++/* NetGear DG834G v4 */
++static struct board_info __initdata board_96348W3 = {
++      .name                           = "96348W3",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++
++      .leds = {
++              {
++                      .name           = "96348W3:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "96348W3:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96348W3::adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96348W3::internet",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++                      {
++                      .desc           = "reset",
++                      .gpio           = 6,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      },
++      },
++};
++
+ #endif
+ /*
+@@ -2629,6 +2682,7 @@ static const struct board_info __initcon
+       &board_ct536_ct5621,
+       &board_96348A_122,
+       &board_CPVA502plus,
++      &board_96348W3,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch
new file mode 100644 (file)
index 0000000..71c5246
--- /dev/null
@@ -0,0 +1,142 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -59,6 +59,13 @@
+ #define NB4_SPI_GPIO_CLK      6
+ #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
++#define CT6373_PID_OFFSET             0xff80
++#define CT6373_74X164_GPIO_BASE       64
++#define CT6373_SPI_GPIO_MOSI  7
++#define CT6373_SPI_GPIO_CLK           6
++#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
++
++
+ static struct board_info board;
+ /*
+@@ -2353,6 +2360,117 @@ static struct board_info __initdata boar
+       .num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
++
++struct spi_gpio_platform_data ct6373_spi_gpio_data = {
++      .sck            = CT6373_SPI_GPIO_CLK,
++      .mosi           = CT6373_SPI_GPIO_MOSI,
++      .miso           = SPI_GPIO_NO_MISO,
++      .num_chipselect = 1,
++};
++
++static struct platform_device ct6373_spi_gpio = {
++      .name = "spi_gpio",
++      .id   = 1,
++      .dev = {
++              .platform_data = &ct6373_spi_gpio_data,
++      },
++};
++
++static struct platform_device * __initdata ct6373_devices[] = {
++      &ct6373_spi_gpio,
++};
++
++#if 0 /* FIXME: 3.14 dropped non-DT support */
++const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
++      .base = CT6373_74X164_GPIO_BASE
++};
++#endif
++
++static struct spi_board_info ct6373_spi_devices[] = {
++#if 0 /* FIXME: 3.14 dropped non-DT support */
++      {
++              .modalias = "74x164",
++              .max_speed_hz = 781000,
++              .bus_num = 1,
++              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++              .mode = SPI_MODE_0,
++              .platform_data = &ct6373_74x164_platform_data
++      }
++#endif
++};
++
++static struct board_info __initdata board_ct6373_1 = {
++      .name                           = "CT6373-1",
++      .expected_cpu_id        = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "CT6373-1:green:power",
++                      .gpio           = 0,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "CT6373-1:green:usb",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:wlan",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:adsl",
++                      .gpio           = CT6373_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:line",
++                      .gpio           = CT6373_74HC64_GPIO(1),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:fxs1",
++                      .gpio           = CT6373_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "CT6373-1:green:fxs2",
++                      .gpio           = CT6373_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 35,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++
++      .devs = ct6373_devices,
++      .num_devs = ARRAY_SIZE(ct6373_devices),
++      .spis = ct6373_spi_devices,
++      .num_spis = ARRAY_SIZE(ct6373_spi_devices),
++};
++
+ static struct board_info __initdata board_HW553 = {
+       .name                           = "HW553",
+       .expected_cpu_id                = 0x6358,
+@@ -2697,6 +2815,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r2,
+       &board_nb4_fxc_r1,
+       &board_nb4_fxc_r2,
++      &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
new file mode 100644 (file)
index 0000000..a5d8451
--- /dev/null
@@ -0,0 +1,84 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2613,6 +2613,73 @@ static struct board_info __initdata boar
+               },
+       }
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++      .name                   = "DVAG3810BN",
++      .expected_cpu_id        = 0x6358,
++
++      .has_uart0              = 1,
++      .has_enet0              = 1,
++      .has_enet1              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 0,
++              .use_internal_phy       = 1,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0              = 1,
++      .has_pccard             = 1,
++      .has_ehci0              = 1,
++
++      .leds = {
++              {
++                      .name   = "DVAG3810BN::voip",
++                      .gpio   = 1,
++              },
++              {
++                      .name   = "DVAG3810BN::dsl",
++                      .gpio   = 22,
++                      .active_low  = 1,
++              },
++              {
++                      .name   = "DVAG3810BN::internet",
++                      .gpio   = 23,
++                      .active_low  = 1,
++              },
++              {
++                      .name   = "DVAG3810BN::power",
++                      .gpio   = 4,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name   = "DVAG3810BN::stop",
++                      .gpio   = 5,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc   = "reset",
++                      .gpio   = 34,
++                      .active_low = 1,
++                      .type   = EV_KEY,
++                      .code   = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -2818,6 +2885,7 @@ static const struct board_info __initcon
+       &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
++      &board_DVAG3810BN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch b/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
new file mode 100644 (file)
index 0000000..70cd2b2
--- /dev/null
@@ -0,0 +1,147 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -19,6 +19,7 @@
+ #if 0 /* FIXME: 3.14 removed non-DT support */
+ #include <linux/spi/74x164.h>
+ #endif
++#include <linux/rtl8367.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -58,6 +59,8 @@
+ #define NB4_SPI_GPIO_MOSI     7
+ #define NB4_SPI_GPIO_CLK      6
+ #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
++#define NB6_GPIO_RTL8367_SDA  18
++#define NB6_GPIO_RTL8367_SCK  20
+ #define CT6373_PID_OFFSET             0xff80
+ #define CT6373_74X164_GPIO_BASE       64
+@@ -2682,6 +2685,104 @@ static struct board_info __initdata boar
+ };
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
++      .mode = RTL8367_EXTIF_MODE_RGMII,
++      .txdelay = 1,
++      .rxdelay = 5,
++      .ability = {
++              .force_mode = 1,
++              .txpause = 1,
++              .rxpause = 1,
++              .link = 1,
++              .duplex = 1,
++              .speed = RTL8367_PORT_SPEED_1000,
++      },
++};
++
++static struct rtl8367_platform_data nb6_rtl8367_data = {
++      .gpio_sda       = NB6_GPIO_RTL8367_SDA,
++      .gpio_sck       = NB6_GPIO_RTL8367_SCK,
++      .extif0_cfg     = &nb6_rtl8367_extif0_cfg,
++};
++
++static struct platform_device nb6_rtl8367_device = {
++      .name           = RTL8367_DRIVER_NAME,
++      .id             = -1,
++      .dev = {
++              .platform_data  = &nb6_rtl8367_data,
++      }
++};
++
++static struct platform_device * __initdata nb6_devices[] = {
++      &nb6_rtl8367_device,
++};
++
++static struct board_info __initdata board_nb6 = {
++      .name                           = "NB6",
++      .expected_cpu_id                = 0x6362,
++
++      .has_uart0                      = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name   = "RGMII",
++                      },
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 24,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 25,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++              {
++                      .desc           = "wlan",
++                      .gpio           = 12,
++                      .type           = EV_KEY,
++                      .code           = KEY_WLAN,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++              {
++                      .desc           = "service",
++                      .gpio           = 10,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++      },
++
++      .devs = nb6_devices,
++      .num_devs = ARRAY_SIZE(nb6_devices),
++};
++#endif
++
+ /*
+  * known 6368 boards
+  */
+@@ -2888,6 +2989,10 @@ static const struct board_info __initcon
+       &board_DVAG3810BN,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      &board_nb6,
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
+@@ -2955,6 +3060,11 @@ static void __init boardid_fixup(u8 *boo
+               }
+       }
++      if (BCMCPU_IS_6362() && (!strncmp(board_name, "NB6-", sizeof("NB6-") - 1))) {
++              board_name[sizeof("NB6") - 1] = '\0';
++              return ;
++      }
++
+       /* check if bcm_tag is at 64k offset */
+       if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
+               /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch
new file mode 100644 (file)
index 0000000..81e963c
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1068,6 +1068,57 @@ static struct board_info __initdata boar
+       .has_ehci0                      = 1,
+ };
++static struct board_info __initdata board_FAST2604 = {
++      .name                                           = "F@ST2604",
++      .expected_cpu_id                        = 0x6348,
++
++      .has_uart0                                      = 1,
++      .has_pci                                        = 1,
++      .has_ohci0                                      = 1,
++
++      .has_enet1                                      = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++
++      .leds = {
++              {
++                      .name                           = "F@ST2604:green:power",
++                      .gpio                           = 0,
++                      .active_low                     = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                           = "F@ST2604:red:power",
++                      .gpio                           = 1,
++                      .active_low                     = 1,
++              },
++              {
++                      .name                           = "F@ST2604:red:inet",
++                      .gpio                           = 4,
++                      .active_low                     = 1,
++              },
++              {
++                      .name                           = "F@ST2604:green:wps",
++                      .gpio                           = 5,
++                      .active_low                     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc                           = "reset",
++                      .gpio                           = 33,
++                      .active_low                     = 1,
++                      .type                           = EV_KEY,
++                      .code                           = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+       .name                           = "RTA1025W_16",
+       .expected_cpu_id                = 0x6348,
+@@ -2957,6 +3008,7 @@ static const struct board_info __initcon
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
++      &board_FAST2604,
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
diff --git a/target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch b/target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch
new file mode 100644 (file)
index 0000000..ab2b4f3
--- /dev/null
@@ -0,0 +1,137 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -252,6 +252,126 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_963281T_TEF = {
++      .name                                   = "963281T_TEF",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name                   = "963281T_TEF:green:power",
++                      .gpio                   = 4,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "963281T_TEF:red:power",
++                      .gpio                   = 8,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:green:inet",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:red:inet",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:green:ppp",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:red:ppp",
++                      .gpio                   = 5,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:green:3g",
++                      .gpio                   = 6,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:red:3g",
++                      .gpio                   = 7,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:green:wlan",
++                      .gpio                   = 9,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:red:wlan",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:green:eth",
++                      .gpio                   = 31,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "963281T_TEF:red:eth",
++                      .gpio                   = 20,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wlan",
++                      .gpio                   = 24,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_dsl_274xb_f1 = {
+       .name                           = "AW4339U",
+       .expected_cpu_id                = 0x6328,
+@@ -2989,6 +3109,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_963281T_TEF,
+       &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch b/target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch
new file mode 100644 (file)
index 0000000..4076184
--- /dev/null
@@ -0,0 +1,90 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -182,6 +182,79 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96328A_1441N1 = {
++      .name                                   = "96328A-1441N1",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name                   = "96328A-1441N1:green:power",
++                      .gpio                   = 8,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "96328A-1441N1:red:power",
++                      .gpio                   = 4,
++              },
++              {
++                      .name                   = "96328A-1441N1:green:inet",
++                      .gpio                   = 7,
++              },
++              {
++                      .name                   = "96328A-1441N1:red:inet",
++                      .gpio                   = 1,
++              },
++              {
++                      .name                   = "96328A-1441N1:green:dsl",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_963281TAN = {
+       .name                           = "963281TAN",
+       .expected_cpu_id                = 0x6328,
+@@ -3108,6 +3181,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_96328A_1441N1,
+       &board_963281TAN,
+       &board_963281T_TEF,
+       &board_dsl_274xb_f1,
diff --git a/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch
new file mode 100644 (file)
index 0000000..d13daf4
--- /dev/null
@@ -0,0 +1,84 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -182,6 +182,73 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96328A_1241N = {
++      .name                                   = "96328A-1241N",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name                   = "96328A-1241N:green:power",
++                      .gpio                   = 4,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "96328A-1241N:red:alarm",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "96328A-1241N:green:inet",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_96328A_1441N1 = {
+       .name                                   = "96328A-1441N1",
+       .expected_cpu_id                        = 0x6328,
+@@ -3181,6 +3248,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_96328A_1241N,
+       &board_96328A_1441N1,
+       &board_963281TAN,
+       &board_963281T_TEF,
diff --git a/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch
new file mode 100644 (file)
index 0000000..5e364c9
--- /dev/null
@@ -0,0 +1,66 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -790,6 +790,55 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+ };
++
++static struct board_info __initdata board_rta770bw = {
++      .name                           = "RTA770BW",
++      .expected_cpu_id                = 0x6345,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "RTA770BW:green:usb",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770BW:green:adsl",
++                      .gpio           = 8,
++              },
++              {
++                      .name           = "RTA770BW:green:diag",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770BW:green:wlan",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 13,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -3262,6 +3311,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
++      &board_rta770bw,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch b/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch
new file mode 100644 (file)
index 0000000..2026aec
--- /dev/null
@@ -0,0 +1,565 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2911,6 +2911,492 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HW556 = {
++      .name                                   = "HW556",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .caldata_offset         = 0xe00000,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++
++      .leds = {
++              {
++                      .name                   = "HW556:red:message",
++                      .gpio                   = 0,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:hspa",
++                      .gpio                   = 1,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:dsl",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:power",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "HW556:red:all",
++                      .gpio                   = 6,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "help",
++                      .gpio                   = 8,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_HELP,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wlan",
++                      .gpio                   = 9,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "restart",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_CONFIG,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++static struct board_info __initdata board_HW556_A = {
++      .name                                   = "HW556_A",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0xeffe00,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++
++      .leds = {
++              {
++                      .name                   = "HW556:green:lan1",
++                      .gpio                   = 0,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan2",
++                      .gpio                   = 1,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:dsl",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:power",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "HW556:red:message",
++                      .gpio                   = 12,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan1",
++                      .gpio                   = 13,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:hspa",
++                      .gpio                   = 15,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan2",
++                      .gpio                   = 22,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan3",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan3",
++                      .gpio                   = 26,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan4",
++                      .gpio                   = 27,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan4",
++                      .gpio                   = 28,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "help",
++                      .gpio                   = 8,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_HELP,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wlan",
++                      .gpio                   = 9,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "restart",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_CONFIG,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++static struct board_info __initdata board_HW556_B = {
++      .name                                   = "HW556_B",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset         = 0xf7e000,
++                      .slot                   = 1,
++                      .endian_check           = 1,
++                      .led_pin                = 2,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++
++      .leds = {
++              {
++                      .name                   = "HW556:red:message",
++                      .gpio                   = 0,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:hspa",
++                      .gpio                   = 1,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:dsl",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:power",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "HW556:red:all",
++                      .gpio                   = 6,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "HW556:green:lan1",
++                      .gpio                   = 12,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan1",
++                      .gpio                   = 13,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan2",
++                      .gpio                   = 15,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan2",
++                      .gpio                   = 22,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan3",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan3",
++                      .gpio                   = 26,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan4",
++                      .gpio                   = 27,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan4",
++                      .gpio                   = 28,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "help",
++                      .gpio                   = 8,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_HELP,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wlan",
++                      .gpio                   = 9,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "restart",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_CONFIG,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++static struct board_info __initdata board_HW556_C = {
++      .name                                   = "HW556_C",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset         = 0xefe000,
++                      .slot                   = 1,
++                      .endian_check           = 1,
++                      .led_pin                = 2,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++
++      .leds = {
++              {
++                      .name                   = "HW556:red:message",
++                      .gpio                   = 0,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:hspa",
++                      .gpio                   = 1,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:dsl",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:power",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "HW556:red:all",
++                      .gpio                   = 6,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "HW556:green:lan1",
++                      .gpio                   = 12,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan1",
++                      .gpio                   = 13,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan2",
++                      .gpio                   = 15,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan2",
++                      .gpio                   = 22,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan3",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan3",
++                      .gpio                   = 26,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:green:lan4",
++                      .gpio                   = 27,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "HW556:red:lan4",
++                      .gpio                   = 28,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "help",
++                      .gpio                   = 8,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_HELP,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wlan",
++                      .gpio                   = 9,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "restart",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_CONFIG,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+  /* T-Home Speedport W 303V Typ B */
+ static struct board_info __initdata board_spw303v = {
+       .name                   = "96358-502V",
+@@ -3350,6 +3836,10 @@ static const struct board_info __initcon
+       &board_nb4_fxc_r2,
+       &board_ct6373_1,
+       &board_HW553,
++      &board_HW556,
++      &board_HW556_A,
++      &board_HW556_B,
++      &board_HW556_C,
+       &board_spw303v,
+       &board_DVAG3810BN,
+ #endif
+@@ -3415,13 +3905,37 @@ static void __init boardid_fixup(u8 *boo
+       struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
+       char *board_name = (char *)bcm63xx_nvram_get_name();
+-      if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
+-              u8 *p = boot_addr + NB4_PID_OFFSET;
+-
+-              /* Extract nb4 PID */
+-              if (!memcmp(p, "NB4-", 4)) {
+-                      memcpy(board_name, p, sizeof("NB4-XXX-rX"));
+-                      return;
++      if (BCMCPU_IS_6358()) {
++              if (!strcmp(board_name, "96358VW")) {
++                      u8 *p = boot_addr + NB4_PID_OFFSET;
++
++                      /* Extract nb4 PID */
++                      if (!memcmp(p, "NB4-", 4)) {
++                              memcpy(board_name, p, sizeof("NB4-XXX-rX"));
++                              return;
++                      }
++              } else if (!strcmp(board_name, "HW556")) {
++                      /*
++                       * HW556 has different wlan caldatas depending on
++                       * hardware version.
++                       * Detect hardware version and change board id
++                       */
++                      u8 cal_data_ath9k[4] = { 0xa5, 0x5a, 0, 0 };
++                      u8 cal_data_rt3062[4] = { 0x62, 0x30, 1, 0 };
++
++                      if (!memcmp(boot_addr + 0xeffe00,
++                                  &cal_data_rt3062, 4)) {
++                              /* Ralink 0xeffe00 */
++                              memcpy(board_name, "HW556_A", 7);
++                      } else if (!memcmp(boot_addr + 0xf7e000,
++                                         &cal_data_ath9k, 4)) {
++                              /* Atheros 0xf7e000 */
++                              memcpy(board_name, "HW556_B", 7);
++                      } else if (!memcmp(boot_addr + 0xefe000,
++                                         &cal_data_ath9k, 4)) {
++                              /* Atheros 0xefe000 */
++                              memcpy(board_name, "HW556_C", 7);
++                      }
+               }
+       }
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -70,6 +70,11 @@ static int bcm63xx_parse_cfe_partitions(
+                             BCM63XX_CFE_BLOCK_SIZE);
+       cfelen = cfe_erasesize;
++
++      /* Fix HW556 MX29LV128DB */
++      if (!strncmp(bcm63xx_nvram_get_name(), "HW556", 5))
++              cfelen = 0x20000;
++
+       nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+       nvramlen = roundup(nvramlen, cfe_erasesize);
+       nvramaddr = master->size - nvramlen;
diff --git a/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch
new file mode 100644 (file)
index 0000000..607807a
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -778,6 +778,60 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "RTA770W:green:usb",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:adsl",
++                      .gpio           = 8,
++              },
++              {
++                      .name           = "RTA770W:green:diag",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:wlan",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 13,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -3798,6 +3852,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch b/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
new file mode 100644 (file)
index 0000000..c08135c
--- /dev/null
@@ -0,0 +1,145 @@
+From: Marcin Jurkowski <marcin1j@gmail.com>
+Date: Thu, 31 Oct 2013 22:33:10 +0000
+Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
+ router
+
+This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
+router.
+It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
+modem equipped with 64 MiB RAM and 8 MiB flash.
+
+Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1482,6 +1482,122 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_FAST2704V2 = {
++      .name                           = "F@ST2704V2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .has_usbd                       = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              /* front LEDs */
++              {
++                      .name                   = "F@ST2704V2:green:power",
++                      .gpio                   = 4,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "F@ST2704V2:red:power",
++                      .gpio                   = 5,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:red:inet",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:green:dsl",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:green:inet",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:green:usb",
++                      .gpio                   = 1,
++                      .active_low             = 1,
++              },
++
++              /* side button LEDs */
++              {
++                      .name                   = "F@ST2704V2:green:wps",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++              },
++
++              /* FIXME: can't control gpio0 line in "out" state, needs further investigation */
++              /*
++              {
++                      .name                   = "F@ST2704V2:green:rfkill",
++                      .gpio                   = 0,
++                      .active_low             = 1,
++              },
++              */
++
++      },
++      .buttons = {
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wps",
++                      .gpio                   = 24,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WPS_BUTTON,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "rfkill",
++                      .gpio                   = 15,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+       .name                           = "RTA1025W_16",
+       .expected_cpu_id                = 0x6348,
+@@ -3842,6 +3958,7 @@ static const struct board_info __initcon
+       &board_963281TAN,
+       &board_963281T_TEF,
+       &board_dsl_274xb_f1,
++      &board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch b/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch
new file mode 100644 (file)
index 0000000..6f64200
--- /dev/null
@@ -0,0 +1,113 @@
+From: Max Staudt <openwrt.max@enpas.org>
+Date: Wed, 15 Jan 2014 18:51:13 +0000
+Subject: [PATCH] brcm63xx: F@ST2504n board support (Linux-3.10.26)
+
+Signed-off-by: Max Staudt <openwrt.max@enpas.org>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -3797,6 +3797,96 @@ static struct board_info __initdata boar
+       .devs = nb6_devices,
+       .num_devs = ARRAY_SIZE(nb6_devices),
+ };
++
++static struct board_info __initdata board_fast2504n = {
++      .name                           = "F@ST2504n",
++      .expected_cpu_id                = 0x6362,
++
++      .has_uart0                      = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "fast2504n:orange:power",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:green:power",
++                      .gpio           = 10,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "fast2504n:red:internet",
++                      .gpio           = 26,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:green:ok",
++                      .gpio           = 28,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:orange:ok",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:orange:wlan",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 24,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 25,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ /*
+@@ -4018,6 +4108,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6362
+       &board_nb6,
++      &board_fast2504n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch
new file mode 100644 (file)
index 0000000..9aa1759
--- /dev/null
@@ -0,0 +1,102 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2213,6 +2213,99 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "AGPF-S0:red:power",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "AGPF-S0:red:service",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:service",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:adsl",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:red:adsl",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:red:wifi",
++                      .gpio           = 23,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:wifi",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:internet",
++                      .gpio           = 25,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:red:internet",
++                      .gpio           = 24,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:red:usr1",
++                      .gpio           = 27,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:usr1",
++                      .gpio           = 26,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:red:usr2",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AGPF-S0:green:usr2",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 37,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 34,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
+ };
+ static struct board_info __initdata board_DWVS0 = {
diff --git a/target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch
new file mode 100644 (file)
index 0000000..aff9c4f
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1657,6 +1657,19 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "96348GW-A::adsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96348GW-A::usb",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              }
++      },
+ };
+ static struct board_info __initdata board_96348_D4PW = {
diff --git a/target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch
new file mode 100644 (file)
index 0000000..de0a222
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1001,6 +1001,17 @@ static struct board_info __initdata boar
+                       .active_low     = 1,
+               },
+       },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 6,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
+ };
+ static struct board_info __initdata board_96348gw_11 = {
diff --git a/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch b/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch
new file mode 100644 (file)
index 0000000..ee3cdec
--- /dev/null
@@ -0,0 +1,105 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -629,6 +629,8 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -672,6 +674,8 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -957,6 +961,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -1029,6 +1035,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -1258,6 +1266,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -1433,6 +1443,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -1623,6 +1635,12 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -2038,6 +2056,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -2090,6 +2110,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -2231,6 +2253,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -2348,6 +2372,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
diff --git a/target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch b/target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch
new file mode 100644 (file)
index 0000000..d9c15e2
--- /dev/null
@@ -0,0 +1,97 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2380,6 +2380,94 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+       .has_ehci0                      = 1,
++
++      .leds = {
++              {
++                      .name           = "DWV-S0:red:power",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:green:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "DWV-S0:red:internet",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:green:internet",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:green:ADSL",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:red:ADSL",
++                      .gpio           = 12,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:red:wifi",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:green:VoIP",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:red:VoIP",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:red:ethernet",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:green:ethernet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:red:USB",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "DWV-S0:green:USB",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 37,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 34,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
+ };
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch b/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
new file mode 100644 (file)
index 0000000..5192bb5
--- /dev/null
@@ -0,0 +1,106 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -104,6 +104,93 @@ static struct board_info __initdata boar
+ #endif
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++      .name                           = "96318REF",
++      .expected_cpu_id                = 0x6318,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "96318REF:red:post-failed",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF:green:inet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF:red:inet-fail",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "wps",
++                      .gpio                   = 33,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WPS_BUTTON,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 34,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++#endif
++
++/*
+  * known 6328 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -4272,6 +4359,9 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+       &board_cvg834g,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++      &board_96318ref,
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_96328A_1241N,
diff --git a/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch
new file mode 100644 (file)
index 0000000..43a23b5
--- /dev/null
@@ -0,0 +1,105 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -188,6 +188,94 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96318ref_p300 = {
++      .name                           = "96318REF_P300",
++      .expected_cpu_id                = 0x6318,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "96318REF_P300:red:post-failed",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF_P300:green:inet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF_P300:red:inet-fail",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "96318REF_P300::usb-pwron",
++                      .gpio           = 13,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "wps",
++                      .gpio                   = 33,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WPS_BUTTON,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 34,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -4361,6 +4449,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
++      &board_96318ref_p300,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
diff --git a/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
new file mode 100644 (file)
index 0000000..96d7716
--- /dev/null
@@ -0,0 +1,88 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4441,6 +4441,75 @@ static struct board_info __initdata boar
+ #endif
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963269bhr = {
++      .name                           = "963269BHR",
++      .expected_cpu_id                = 0x63268,
++
++      .has_uart0                      = 1,
++
++      .has_pci                        = 1,
++
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "963629BHR:green:usb1",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963629BHR:green:usb2",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 32,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++#endif
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -4525,6 +4594,9 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963269bhr,
++#endif
+ };
+ /*
diff --git a/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch
new file mode 100644 (file)
index 0000000..ec25b9e
--- /dev/null
@@ -0,0 +1,70 @@
+From: "mexit@o2.pl" <mexit@o2.pl>
+Date: Sun, 24 Nov 2013 21:33:38 +0000
+Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
+
+Support for Asmax AR 1004g router
+
+Signed-off-by: Adrian Feliks <mexit@o2.pl>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2210,6 +2210,51 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++      .name                           = "AR1004G",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "AR1004G:green:inet",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AR1004G:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "AR1004G:red:power",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ #endif
+ /*
+@@ -4561,6 +4606,7 @@ static const struct board_info __initcon
+       &board_96348A_122,
+       &board_CPVA502plus,
+       &board_96348W3,
++      &board_96348gw_10_AR1004G,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
new file mode 100644 (file)
index 0000000..4f9ef79
--- /dev/null
@@ -0,0 +1,119 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4552,6 +4552,108 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_vw6339gu = {
++      .name                           = "VW6339GU",
++      .expected_cpu_id                = 0x63268,
++
++      .has_uart0                      = 1,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN2",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN4",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 7,
++                              .name   = "WAN",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "VW6339GU:green:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:red:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:internet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:red:internet",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:dsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:wps",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:usb",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 32,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ /*
+@@ -4642,6 +4744,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963269bhr,
++      &board_vw6339gu,
+ #endif
+ };
diff --git a/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch
new file mode 100644 (file)
index 0000000..6a70077
--- /dev/null
@@ -0,0 +1,142 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4489,6 +4489,131 @@ static struct board_info __initdata boar
+  * known 63268/63269 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963268bu_p300 = {
++      .name                           = "963268BU_P300",
++      .expected_cpu_id                = 0x63268,
++
++      .has_uart0                      = 1,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 17,
++                              .name   = "FE1",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "GbE2",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0,
++                              .name   = "GbE3",
++                      },
++
++                      [5] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "GbE1",
++                      },
++
++                      [6] = {
++                              .used   = 1,
++                              .phy_id = 24,
++                              .name   = "GbE4",
++                      },
++
++                      [7] = {
++                              .used   = 1,
++                              .phy_id = 25,
++                              .name   = "GbE5",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "963268BU_P300:green:power",
++                      .gpio           = 20,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:red:power",
++                      .gpio           = 21,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:green:internet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:red:internet",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:green:adsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:green:wps",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:green:voip1",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:green:voip2",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "963268BU_P300:green:pots",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 32,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 33,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_963269bhr = {
+       .name                           = "963269BHR",
+       .expected_cpu_id                = 0x63268,
+@@ -4743,6 +4868,7 @@ static const struct board_info __initcon
+       &board_96368mvngr,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963268bu_p300,
+       &board_963269bhr,
+       &board_vw6339gu,
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch
new file mode 100644 (file)
index 0000000..3e78c17
--- /dev/null
@@ -0,0 +1,34 @@
+--- a/arch/mips/bcm63xx/nvram.c
++++ b/arch/mips/bcm63xx/nvram.c
+@@ -40,6 +40,13 @@ struct bcm963xx_nvram {
+ static struct bcm963xx_nvram nvram;
+ static int mac_addr_used;
++/*
++ * Required export for WL
++ */
++#define NVRAM_SPACE 0x8000
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
++
+ void __init bcm63xx_nvram_init(void *addr)
+ {
+       unsigned int check_len;
+@@ -48,6 +55,7 @@ void __init bcm63xx_nvram_init(void *add
+       /* extract nvram data */
+       memcpy(&nvram, addr, sizeof(nvram));
++      memcpy(&nvram_buf, addr, NVRAM_SPACE);
+       /* check checksum before using data */
+       if (nvram.version <= 4) {
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch
new file mode 100644 (file)
index 0000000..3c0faba
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -14,6 +14,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/export.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+ #if 0 /* FIXME: 3.14 removed non-DT support */
+@@ -4879,7 +4880,7 @@ static const struct board_info __initcon
+  * bcm4318 WLAN work
+  */
+ #ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
++struct ssb_sprom bcm63xx_sprom = {
+       .revision               = 0x02,
+       .board_rev              = 0x17,
+       .country_code           = 0x0,
+@@ -4899,6 +4900,7 @@ static struct ssb_sprom bcm63xx_sprom =
+       .boardflags_lo          = 0x2848,
+       .boardflags_hi          = 0x0000,
+ };
++EXPORT_SYMBOL(bcm63xx_sprom);
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
diff --git a/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch
new file mode 100644 (file)
index 0000000..9037d89
--- /dev/null
@@ -0,0 +1,30 @@
+From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
+From: Miguel GAIO <miguel.gaio@efixo.com>
+Date: Fri, 6 Jul 2012 14:12:33 +0200
+Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
+
+---
+ drivers/net/phy/rtl8367.c  |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/phy/rtl8367.c
++++ b/drivers/net/phy/rtl8367.c
+@@ -146,6 +146,10 @@
+ #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
+ #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
++#define RTL8367_PHY_AD_REG                    0x130f
++#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
++#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
++
+ #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
+ #define   RTL8367_DI_FORCE_MODE                       BIT(12)
+ #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
+@@ -894,6 +898,7 @@ static int rtl8367_extif_set_mode(struct
+       case RTL8367_EXTIF_MODE_RGMII_33V:
+               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
+               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
++              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
+               break;
+       case RTL8367_EXTIF_MODE_TMII_MAC: