target/linux/at91/image/uboot-env.txt

   1 /* Do Not remove First 2 lines, Makefile will modify these lines with proper board names */
   2 board=atmel_at91sam9x25ek
   3 board_name=atmel,at91sam9x25ek
   4 bootargs=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
   5 bootargsd2=console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait rootfstype=ext4
   6 bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
   7 bootcmd=run setloadaddr; run setbootargs; run fatload_mmc; bootm ${loadaddr}
   8 bootdelay=1
   9 fatload_mmc=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then fatload mmc 1:1 ${loadaddr} ${board}-fit.itb; else fatload mmc 0:1 ${loadaddr} ${board}-fit.itb; fi
  10 setbootargs=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
  11 setloadaddr=if test ${board_name} = microchip,sama7g5ek; then setenv loadaddr 0x63000000; else setenv loadaddr 0x21000000; fi
  12 ethact=gmac0
  13 stderr=serial
  14 stdin=serial
  15 stdout=serial