target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "ar9132.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
  10         model = "TP-Link TL-WA901ND v2";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         extosc: ref {
  21                 compatible = "fixed-clock";
  22                 #clock-cells = <0>;
  23                 clock-frequency = <40000000>;
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 reset {
  30                         label = "reset";
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 qss {
  37                         label = "qss";
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 led_system: system {
  48                         label = "green:system";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 qss {
  53                         label = "green:qss";
  54                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  55                 };
  56
  57                 wlan {
  58                         label = "green:wlan";
  59                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62         };
  63 };
  64
  65 &pll {
  66         clocks = <&extosc>;
  67 };
  68
  69 &spi {
  70         status = "okay";
  71
  72         flash@0 {
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <25000000>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         uboot: partition@0 {
  83                                 label = "u-boot";
  84                                 reg = <0x000000 0x020000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@1 {
  89                                 compatible = "tplink,firmware";
  90                                 label = "firmware";
  91                                 reg = <0x020000 0x3D0000>;
  92                         };
  93
  94                         art: partition@2 {
  95                                 label = "art";
  96                                 reg = <0x3F0000 0x010000>;
  97                                 read-only;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &mdio0 {
 104         status = "okay";
 105
 106         phy12: ethernet-phy@c {
 107                 reg = <0xc>;
 108                 phy-mode = "mii";
 109
 110                 resets = <&rst 8>;
 111                 reset-names = "phy";
 112
 113                 reset-assert-us = <10000>;
 114                 reset-deassert-us = <10000>;
 115         };
 116 };
 117
 118 &eth0 {
 119         status = "okay";
 120
 121         mtd-mac-address = <&uboot 0x1fc00>;
 122
 123         phy-handle = <&phy12>;
 124 };
 125
 126 &wmac {
 127         status = "okay";
 128
 129         mtd-cal-data = <&art 0x1000>;
 130         mtd-mac-address = <&uboot 0x1fc00>;
 131 };