target/linux/ath79/dts/qca9531_comfast_cf-e5.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-e5", "qca,qca9531";
  10         model = "COMFAST CF-E5/E7";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys";
  18
  19                 reset {
  20                         label = "reset";
  21                         linux,code = <KEY_RESTART>;
  22                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
  30
  31                 wan {
  32                         label = "blue:wan";
  33                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 lan {
  37                         label = "blue:lan";
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wlan {
  42                         label = "blue:wlan";
  43                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 rssi0 {
  48                         label = "blue:rssi0";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 rssi1 {
  53                         label = "blue:rssi1";
  54                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 rssi2 {
  58                         label = "blue:rssi2";
  59                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62 };
  63
  64 &usb0 {
  65         #address-cells = <1>;
  66         #size-cells = <0>;
  67         status = "okay";
  68
  69         hub_port: port@1 {
  70                 reg = <1>;
  71                 #trigger-source-cells = <0>;
  72         };
  73 };
  74
  75 &usb_phy {
  76         status = "okay";
  77 };
  78
  79 &spi {
  80         status = "okay";
  81
  82         flash@0 {
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0>;
  85                 spi-max-frequency = <25000000>;
  86
  87                 partitions {
  88                         compatible = "fixed-partitions";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91
  92                         partition@0 {
  93                                 label = "u-boot";
  94                                 reg = <0x000000 0x010000>;
  95                                 read-only;
  96                         };
  97
  98                         art: partition@10000 {
  99                                 label = "art";
 100                                 reg = <0x010000 0x010000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@20000 {
 105                                 compatible = "denx,uimage";
 106                                 label = "firmware";
 107                                 reg = <0x020000 0xfd0000>;
 108                         };
 109
 110                         partition@ff0000 {
 111                                 label = "art-backup";
 112                                 reg = <0xff0000 0x010000>;
 113                                 read-only;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &eth0 {
 120         status = "okay";
 121
 122         phy-handle = <&swphy4>;
 123
 124         mtd-mac-address = <&art 0x0>;
 125 };
 126
 127 &eth1 {
 128         mtd-mac-address = <&art 0x6>;
 129 };
 130
 131 &wmac {
 132         status = "okay";
 133
 134         mtd-cal-data = <&art 0x1000>;
 135 };
 136
 137 &pinmux {
 138         led_wan_pin: pinmux_led_wan_pin {
 139                 pinctrl-single,bits = <0x4 0x0 0xff>;
 140         };
 141 };