target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr842n-v3", "qca,qca9533";
  10         model = "TP-Link TL-WR842N v3";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &eth1;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         label = "green:power";
  25                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wifi {
  30                         label = "green:wlan";
  31                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy0tpt";
  33                 };
  34
  35                 qss {
  36                         label = "green:qss";
  37                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 wan_green {
  41                         label = "green:wan";
  42                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wan_red {
  46                         label = "red:wan";
  47                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 lan1 {
  51                         label = "green:lan1";
  52                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 lan2 {
  56                         label = "green:lan2";
  57                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 lan3 {
  61                         label = "green:lan3";
  62                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 lan4 {
  66                         label = "green:lan4";
  67                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 usb {
  71                         label = "green:usb";
  72                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "usbport";
  74                         trigger-sources = <&hub_port>;
  75                 };
  76         };
  77
  78         keys {
  79                 compatible = "gpio-keys";
  80
  81                 reset {
  82                         label = "Reset button";
  83                         linux,code = <KEY_RESTART>;
  84                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  85                         debounce-interval = <60>;
  86                 };
  87
  88                 rfkill {
  89                         label = "RFKILL button";
  90                         linux,code = <KEY_RFKILL>;
  91                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  92                         debounce-interval = <60>;
  93                 };
  94         };
  95 };
  96
  97 &usb0 {
  98         #address-cells = <1>;
  99         #size-cells = <0>;
 100         status = "okay";
 101
 102         hub_port: port@1 {
 103                 reg = <1>;
 104                 #trigger-source-cells = <0>;
 105         };
 106 };
 107
 108 &usb_phy {
 109         status = "okay";
 110 };
 111
 112 &spi {
 113         status = "okay";
 114
 115         flash@0 {
 116                 compatible = "jedec,spi-nor";
 117                 reg = <0>;
 118                 spi-max-frequency = <25000000>;
 119
 120                 partitions {
 121                         compatible = "fixed-partitions";
 122                         #address-cells = <1>;
 123                         #size-cells = <1>;
 124
 125                         uboot: partition@0 {
 126                                 label = "u-boot";
 127                                 reg = <0x000000 0x020000>;
 128                                 read-only;
 129                         };
 130
 131                         partition@20000 {
 132                                 compatible = "tplink,firmware";
 133                                 label = "firmware";
 134                                 reg = <0x020000 0xfd0000>;
 135                         };
 136
 137                         art: partition@ff0000 {
 138                                 label = "art";
 139                                 reg = <0xff0000 0x010000>;
 140                                 read-only;
 141                         };
 142                 };
 143         };
 144 };
 145
 146 &eth0 {
 147         status = "okay";
 148
 149         phy-handle = <&swphy4>;
 150
 151         mtd-mac-address = <&uboot 0x1fc00>;
 152         mtd-mac-address-increment = <1>;
 153 };
 154
 155 &eth1 {
 156         mtd-mac-address = <&uboot 0x1fc00>;
 157 };
 158
 159 &wmac {
 160         status = "okay";
 161
 162         mtd-cal-data = <&art 0x1000>;
 163         mtd-mac-address = <&uboot 0x1fc00>;
 164 };