target/linux/ramips/dts/mt7628an_netgear_r6120.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,r6120", "mediatek,mt7628an-soc";
  10         model = "Netgear R6120";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys-polled";
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 lan {
  34                         label = "r6120:green:lan";
  35                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 led_power: power {
  39                         label = "r6120:green:power";
  40                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan {
  44                         label = "r6120:green:wlan2g";
  45                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wlan_orange {
  49                         label = "r6120:orange:wlan2g";
  50                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wan {
  54                         label = "r6120:green:wan";
  55                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 wan_orange {
  59                         label = "r6120:orange:wan";
  60                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         usb-regulator {
  65                 compatible = "regulator-fixed";
  66
  67                 regulator-name = "USB-power";
  68                 gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
  69                 regulator-min-microvolt = <5000000>;
  70                 regulator-max-microvolt = <5000000>;
  71                 enable-active-high;
  72
  73                 regulator-always-on;
  74         };
  75 };
  76
  77 &pinctrl {
  78         state_default: pinctrl0 {
  79                 gpio {
  80                         ralink,group = "p0led_an", "p1led_an", "p2led_an",
  81                                        "p3led_an", "p4led_an", "wdt",
  82                                        "wled_an", "uart1";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &spi0 {
  89         status = "okay";
  90
  91         flash@0 {
  92                 compatible = "jedec,spi-nor";
  93                 reg = <0>;
  94                 spi-max-frequency = <10000000>;
  95
  96                 partitions {
  97                         compatible = "fixed-partitions";
  98                         #address-cells = <1>;
  99                         #size-cells = <1>;
 100
 101                         partition@0 {
 102                                 label = "u-boot";
 103                                 reg = <0x0 0x40000>;
 104                                 read-only;
 105                         };
 106
 107                         factory: partition@40000 {
 108                                 label = "factory";
 109                                 reg = <0x40000 0x20000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@60000 {
 114                                 label = "nvram";
 115                                 reg = <0x60000 0x30000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@90000 {
 120                                 compatible = "denx,uimage";
 121                                 label = "firmware";
 122                                 reg = <0x90000 0xf60000>;
 123                         };
 124
 125                         partition@ff0000 {
 126                                 label = "reserved";
 127                                 reg = <0xff0000 0x10000>;
 128                                 read-only;
 129                         };
 130                 };
 131         };
 132 };
 133
 134 &wmac {
 135         status = "okay";
 136         mtd-mac-address = <&factory 0x4>;
 137         mediatek,mtd-eeprom = <&factory 0x0>;
 138 };
 139
 140 &ethernet {
 141         mtd-mac-address = <&factory 0x4>;
 142 };
 143
 144 &pcie {
 145         status = "okay";
 146 };
 147
 148 &pcie0 {
 149         wifi@0,0 {
 150                 reg = <0x0000 0 0 0 0>;
 151                 mediatek,mtd-eeprom = <&factory 0x8000>;
 152                 ieee80211-freq-limit = <5000000 6000000>;
 153                 mtd-mac-address = <&factory 0x4>;
 154                 mtd-mac-address-increment = <(2)>;
 155         };
 156 };