+++ /dev/null
-include $(TOPDIR)/rules.mk
-
-ARCH:=mips
-BOARD:=ath79
-BOARDNAME:=Atheros ATH79 (DTS)
-CPU_TYPE:=24kc
-SUBTARGETS:=generic
-
-FEATURES:=ramdisk source-only
-
-KERNEL_PATCHVER:=4.14
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += \
- kmod-gpio-button-hotplug swconfig \
- kmod-ath9k wpad-mini uboot-envtools
-
-$(eval $(call BuildTarget))
+++ /dev/null
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-"glinet,ar150")
- ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt"
- ;;
-"tplink,tl-wr1043nd-v1")
- ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-ath79_setup_interfaces()
-{
- local board="$1"
-
- case "$board" in
- "ubnt,unifi")
- ucidef_set_interface_lan "eth0"
- ;;
-
- "tplink,tl-wr1043nd-v1")
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
- ;;
- "netgear,wndr3800")
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-
- ucidef_add_switch_attr "switch0" "blinkrate" 2
- ucidef_add_switch_port_attr "switch0" 1 led 6
- ucidef_add_switch_port_attr "switch0" 2 led 9
- ucidef_add_switch_port_attr "switch0" 5 led 2
- ;;
- "buffalo,wzr-hp-g450h")
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
- ;;
- *)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ;;
- esac
-}
-
-board_config_update
-board=$(board_name)
-ath79_setup_interfaces $board
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-. /lib/functions/leds.sh
-
-get_status_led() {
- local board=$(board_name)
-
- case $board in
- "glinet,ar150")
- status_led="gl-ar150:orange:wlan"
- ;;
- "tplink,tl-wr1043nd-v1")
- status_led="tp-link:green:system"
- ;;
- "ubnt,unifi")
- status_led="ubnt:green:dome"
- ;;
- esac
-}
-
-set_state() {
- get_status_led
-
- case "$1" in
- preinit)
- status_led_blink_preinit
- ;;
- failsafe)
- status_led_blink_failsafe
- ;;
- preinit_regular)
- status_led_blink_preinit_regular
- ;;
- done)
- status_led_on
- ;;
- esac
-}
+++ /dev/null
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath9k-eeprom-pci-0000:00:00.0.bin")
- case $board in
- "ubnt,unifi")
- ath9k_eeprom_extract "art" 4096 2048
- ;;
- *)
- ath9k_eeprom_die "board $board is not supported yet"
- ;;
- esac
- ;;
-esac
+++ /dev/null
-#!/bin/sh
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$2
- local count=$3
-
- dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_patch_mac() {
- local mac=$1
-
- [ -z "$mac" ] && return
-
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:00:00.0.bin")
- case $board in
- openmesh,om5p-ac-v2)
- ath10kcal_extract "ART" 20480 2116
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
- ;;
- esac
- ;;
-*)
- exit 1
- ;;
-esac
+++ /dev/null
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-
-. /lib/functions/system.sh
-
-PART_NAME=firmware
-RAMFS_COPY_BIN='nandwrite'
-
-CI_BLKSZ=65536
-CI_LDADR=0x80060000
-
-PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
-
-platform_find_partitions() {
- local first dev size erasesize name
- while read dev size erasesize name; do
- name=${name#'"'}; name=${name%'"'}
- case "$name" in
- vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem)
- if [ -z "$first" ]; then
- first="$name"
- else
- echo "$erasesize:$first:$name"
- break
- fi
- ;;
- esac
- done < /proc/mtd
-}
-
-platform_find_kernelpart() {
- local part
- for part in "${1%:*}" "${1#*:}"; do
- case "$part" in
- vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin)
- echo "$part"
- break
- ;;
- esac
- done
-}
-
-platform_find_rootfspart() {
- local part
- for part in "${1%:*}" "${1#*:}"; do
- [ "$part" != "$2" ] && echo "$part" && break
- done
-}
-
-platform_do_upgrade_combined() {
- local partitions=$(platform_find_partitions)
- local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
- local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
- local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
- local kern_blocks=$(($kern_length / $CI_BLKSZ))
- local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
-
- if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
- [ ${kern_blocks:-0} -gt 0 ] && \
- [ ${root_blocks:-0} -gt 0 ] && \
- [ ${erase_size:-0} -gt 0 ];
- then
- local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart")
- local append=""
- [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
-
- if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then
- ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
- dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
- mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
- elif [ -n "$rootfspart" ]; then
- dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
- mtd write - $kernelpart
- dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
- mtd -r $append write - $rootfspart
- fi
- fi
- PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
-}
-
-tplink_get_image_hwid() {
- get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_image_mid() {
- get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_image_boot_size() {
- get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_pharos_check_image() {
- local magic_long="$(get_magic_long "$1")"
- [ "$magic_long" != "7f454c46" ] && {
- echo "Invalid image magic '$magic_long'"
- return 1
- }
-
- local model_string="$(tplink_pharos_get_model_string)"
- local line
-
- # Here $1 is given to dd directly instead of get_image as otherwise the skip
- # will take almost a second (as dd can't seek then)
- #
- # This will fail if the image isn't local, but that's fine: as the
- # read loop won't be executed at all, it will return true, so the image
- # is accepted (loading the first 1.5M of a remote image for this check seems
- # a bit extreme)
- dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
- [ "$line" = "$model_string" ] && break
- done || {
- echo "Unsupported image (model not in support-list)"
- return 1
- }
-
- return 0
-}
-
-seama_get_type_magic() {
- get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-wrgg_get_image_magic() {
- get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-cybertan_get_image_magic() {
- get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
-}
-
-cybertan_check_image() {
- local magic="$(cybertan_get_image_magic "$1")"
- local fw_magic="$(cybertan_get_hw_magic)"
-
- [ "$fw_magic" != "$magic" ] && {
- echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic"
- return 1
- }
-
- return 0
-}
-
-platform_do_upgrade_compex() {
- local fw_file=$1
- local fw_part=$PART_NAME
- local fw_mtd=$(find_mtd_part $fw_part)
- local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
- local fw_blocks=$(($fw_length / 65536))
-
- if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
- local append=""
- [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
-
- sync
- dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
- mtd $append write - "$fw_part"
- fi
-}
-
-alfa_check_image() {
- local magic_long="$(get_magic_long "$1")"
- local fw_part_size=$(mtd_get_part_size firmware)
-
- case "$magic_long" in
- "27051956")
- [ "$fw_part_size" != "16318464" ] && {
- echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
- return 1
- }
- ;;
- "68737173")
- [ "$fw_part_size" != "7929856" ] && {
- echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
- return 1
- }
- ;;
- esac
-
- return 0
-}
-
-platform_check_image() {
- local board=$(board_name)
- local magic="$(get_magic_word "$1")"
- local magic_long="$(get_magic_long "$1")"
-
- [ "$#" -gt 1 ] && return 1
-
- case "$board" in
- "ubnt,unifi")
- [ "$magic" != "2705" ] && {
- echo "Invalid image type."
- return 1
- }
-
- return 0
- ;;
- esac
-
- echo "Sysupgrade is not yet supported on $board."
- return 1
-}
-
-platform_do_upgrade() {
- local board=$(board_name)
-
- case "$board" in
- *)
- default_do_upgrade "$ARGV"
- ;;
- esac
-}
-
-disable_watchdog() {
- killall watchdog
- ( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
- echo 'Could not disable watchdog'
- return 1
- }
-}
-
-append sysupgrade_pre_upgrade disable_watchdog
+++ /dev/null
-CONFIG_AG71XX=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AG71XX_DEBUG_FS=y
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATH79=y
-CONFIG_ATH79_WDT=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_COMPRESSION=""
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_RESET is not set
-CONFIG_LIBFDT=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_AR7100_USB is not set
-# CONFIG_PHY_AR7200_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_ATH79=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_RB4XX is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
- compatible = "qca,ar7100";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips24Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- ahb {
- apb {
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar7100-ddr-controller";
- reg = <0x18000000 0x100>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "ns16550a";
- reg = <0x18020000 0x20>;
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "uart";
-
- reg-io-width = <4>;
- reg-shift = <2>;
- no-loopback-test;
-
- status = "disabled";
- };
-
- usb_phy: usb-phy@18030000 {
- compatible = "qca,ar7100-usb-phy";
- reg = <0x18030000 0x10>;
-
- reset-names = "usb-phy", "usb-host", "usb-ohci-dll";
- resets = <&rst 4>, <&rst 5>, <&rst 6>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar7100-gpio";
- reg = <0x18040000 0x30>;
- interrupts = <2>;
-
- ngpios = <16>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,ar7100-pll", "syscon";
- reg = <0x18050000 0x20>;
-
- clock-names = "ref";
- /* The board must provides the ref clock */
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
- };
-
- wdt: wdt@18060008 {
- compatible = "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-
- interrupts = <4>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "wdt";
- };
-
-
- rst: reset-controller@18060024 {
- compatible = "qca,ar7100-reset";
- reg = <0x18060024 0x4>;
-
- #reset-cells = <1>;
- };
-
- pcie0: pcie-controller@180c0000 {
- compatible = "qca,ar7100-pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0x0>;
- reg = <0x17010000 0x100>;
- reg-names = "cfg_base";
- ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */
- 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-map-mask = <0 0 0 1>;
- interrupt-map = <0 0 0 0 &pcie0 0>;
- status = "disabled";
- };
- };
- };
-
- usb2: usb@1b000000 {
- compatible = "generic-ehci";
- reg = <0x1b000000 0x1000>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <3>;
-
- phy-names = "usb-phy";
- phys = <&usb_phy>;
-
- has-synopsys-hc-bug;
-
- status = "disabled";
- };
-
- usb1: usb@1c000000 {
- compatible = "generic-ohci";
- reg = <0x1c000000 0x1000>;
-
- interrupt-parent = <&miscintc>;
- interrupts = <6>;
-
- phy-names = "usb-phy";
- phys = <&usb_phy>;
-
- status = "disabled";
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar7100-spi";
- reg = <0x1f000000 0x10>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "ahb";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "disabled";
- };
-};
-
-&cpuintc {
- qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
- qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
- <&ddr_ctrl 0>, <&ddr_ctrl 1>;
-};
-
-&miscintc {
- compatible = "qca,ar7100-misc-intc";
-};
-
-ð0 {
- compatible = "qca,ar7100-eth";
- reg = <0x19000000 0x200
- 0x18070000 0x4>;
-
- pll-data = <0x00110000 0x00001099 0x00991099>;
- pll-reg = <0x4 0x10 17>;
- pll-handle = <&pll>;
- phy-mode = "rgmii";
-
- resets = <&rst 8>, <&rst 9>;
- reset-names = "phy", "mac";
-};
-
-&mdio1 {
- builtin-switch;
-};
-
-ð1 {
- compatible = "qca,ar7100-eth";
- reg = <0x1a000000 0x200
- 0x18070004 0x4>;
-
- pll-data = <0x00110000 0x00001099 0x00991099>;
- pll-reg = <0x4 0x14 19>;
- pll-handle = <&pll>;
-
- phy-mode = "rgmii";
-
- resets = <&rst 12>, <&rst 13>;
- reset-names = "phy", "mac";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
-
-/ {
- compatible = "netgear,wndr3800", "qca,ar7161";
- model = "Netgear WNDR3800";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- reset-leds {
- compatible = "reset-leds";
-
- wps {
- label = "netgear:green:usb";
- resets = <&rst 12>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- wps {
- label = "netgear:orange:wps";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- power_green {
- label = "netgear:green:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- power_orange {
- label = "netgear:orange:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wps_green {
- label = "netgear:green:wps";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wan_green {
- label = "netgear:green:wan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- button@1 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- };
-
- button@2 {
- label = "wifi";
- linux,code = <BTN_2>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- rtl8366s {
- compatible = "realtek,rtl8366s";
- gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
- mdio-bus {
- status = "okay";
-
- phy-mask = <0x10>;
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l12805d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x050000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x050000 0x020000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x70000 0xf80000>;
- };
-
- partition@3 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- pll-data = <0x11110000 0x00001099 0x00991099>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-ð1 {
- status = "okay";
-
- pll-data = <0x11110000 0x00001099 0x00991099>;
-
- resets = <&rst 13>;
- reset-names = "mac";
-
- phy-handle = <&phy4>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar724x.dtsi"
-
-/ {
- usb_phy: usb-phy {
- compatible = "qca,ar7200-usb-phy";
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-};
-
-&gpio {
- ngpios = <20>;
-};
-
-&ahb {
- usb: usb@1b000000 {
- compatible = "generic-ehci";
- reg = <0x1b000000 0x1000>;
-
- interrupts = <3>;
-
- resets = <&rst 5>;
- reset-names = "usb-host";
-
- has-transaction-translator;
- caps-offset = <0x100>;
-
- phy-names = "usb-phy";
- phys = <&usb_phy>;
-
- status = "disabled";
- };
-};
-
-&mdio0 {
- regmap = <ð1>;
- builtin-switch;
- resets = <&rst 22>;
- reset-names = "mdio";
-};
-
-ð0 {
- compatible = "qca,ar7241-eth", "syscon";
-
- pll-data = <0x00110000 0x00001099 0x00991099>;
-
- resets = <&rst 8>, <&rst 9>;
- reset-names = "mac", "phy";
-};
-
-&mdio1 {
- resets = <&rst 23>;
- reset-names = "mdio";
- builtin-switch;
-};
-
-ð1 {
- compatible = "qca,ar7241-eth", "syscon";
-
- pll-data = <0x00110000 0x00001099 0x00991099>;
-
- resets = <&rst 12>, <&rst 13>;
- reset-names = "mac", "phy";
-
- phy-mode = "gmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,xm", "qca,ar7241";
- model = "Ubiquiti Bullet M";
-};
-
-ð1 {
- compatible = "syscon";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,nm", "qca,ar7241";
- model = "Ubiquiti Nanostation M";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,rm", "qca,ar7241";
- model = "Ubiquiti Rocket M";
-};
-
-ð1 {
- compatible = "syscon";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
- compatible = "ubnt,unifi", "qca,ar7241";
- model = "Ubiquiti UniFi AP";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led@0 {
- label = "ubnt:green:dome";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- led@1 {
- label = "ubnt:orange:dome";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0x750000>;
- };
-
- partition@3 {
- label = "board_config";
- reg = <0x7a0000 0x010000>;
- read-only;
- };
-
- partition@4 {
- label = "cfg";
- reg = <0x7b0000 0x040000>;
- read-only;
- };
-
- art: partition@5 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-
- ath9k@0000 {
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
- phy-handle = <&phy4>;
-};
-
-ð1 {
- status = "okay";
-
- compatible = "syscon";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ar7241_ubnt-xm.dtsi"
-
-/ {
- compatible = "ubnt,xm", "qca,ar7241";
- model = "Ubiquiti Networks XM (rev 1.0) board";
-};
-
-ð1 {
- compatible = "syscon";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
- compatible = "ubnt,xm", "qca,ar7241";
- model = "Ubiquiti Networks XM (rev 1.0) board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
-/* extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-*/
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led@0 {
- label = "ubnt:red:link1";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- led@1 {
- label = "ubnt:orange:link2";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- led@2 {
- label = "ubnt:green:link3";
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
-
- led@3 {
- label = "ubnt:green:link4";
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-/*&pll {
- clocks = <&extosc>;
-};*/
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0x750000>;
- };
-
- partition@3 {
- label = "board_config";
- reg = <0x7a0000 0x010000>;
- read-only;
- };
-
- partition@4 {
- label = "cfg";
- reg = <0x7b0000 0x040000>;
- read-only;
- };
-
- art: partition@5 {
- label = "art";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-
- ath9k@0000 {
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
-
- phy-mode = "mii";
- phy-handle = <&phy4>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x6>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar724x.dtsi"
-
-/ {
- usb_phy: usb-phy {
- compatible = "qca,ar7200-usb-phy";
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-};
-
-&gpio {
- ngpios = <20>;
-};
-
-&ahb {
- usb: usb@1b000000 {
- compatible = "generic-ehci";
- reg = <0x1b000000 0x1000>;
-
- interrupts = <3>;
-
- resets = <&rst 5>;
- reset-names = "usb-host";
-
- has-transaction-translator;
- caps-offset = <0x100>;
-
- phy-names = "usb-phy";
- phys = <&usb_phy>;
-
- status = "disabled";
- };
-};
-
-&mdio0 {
- resets = <&rst 22>;
- reset-names = "mdio";
-};
-
-ð0 {
- compatible = "qca,ar7242-eth", "syscon";
-
- pll-data = <0x16000000 0x00000101 0x00001616>;
- pll-reg = <0x4 0x2c 17>;
- pll-handle = <&pll>;
-
- resets = <&rst 8>, <&rst 9>;
- reset-names = "mac", "phy";
-};
-
-&mdio1 {
- resets = <&rst 23>;
- reset-names = "mdio";
- builtin-switch;
-};
-
-ð1 {
- compatible = "qca,ar7242-eth", "syscon";
-
- resets = <&rst 12>, <&rst 13>;
- reset-names = "mac", "phy";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7242.dtsi"
-
-/ {
- compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
- model = "Buffalo WZR-HP-G450H";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- button@0 {
- label = "usb";
- linux,code = <BTN_2>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- button@1 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- button@2 {
- label = "movie_engine";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- button@3 {
- label = "aoss";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- button@4 {
- label = "router_off";
- linux,code = <BTN_5>;
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- };
-
- leds {
- compatible = "gpio-leds";
- led@0 {
- label = "buffalo:orange:security";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- led@1 {
- label = "buffalo:red:diag";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb_power {
- gpio-export,name = "wzr-hp-g450h:usb-power";
- gpio-export,output = <1>;
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&mdio0 {
- status = "okay";
- phy-mask = <0x1>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-mode = "rgmii";
- pll-data = <0x62000000 0 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-
- ath9k@0000 {
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
- compatible = "qca,ar7240";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips24Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- ahb: ahb {
- apb {
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar9132-ddr-controller",
- "qca,ar7240-ddr-controller";
- reg = <0x18000000 0x100>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "ns16550a";
- reg = <0x18020000 0x20>;
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "uart";
-
- reg-io-width = <4>;
- reg-shift = <2>;
- no-loopback-test;
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar7240-gpio",
- "qca,ar7100-gpio";
- reg = <0x18040000 0x30>;
- interrupts = <2>;
-
- ngpios = <18>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,ar7240-pll",
- "qca,ar7240-pll";
- reg = <0x18050000 0x20>;
-
- clock-names = "ref";
- /* The board must provides the ref clock */
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
- };
-
- wdt: wdt@18060008 {
- compatible = "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-
- interrupts = <4>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "wdt";
- };
-
- rst: reset-controller@1806001c {
- compatible = "qca,ar7240-reset",
- "qca,ar7100-reset";
- reg = <0x1806001c 0x4>;
-
- #reset-cells = <1>;
- };
-
- pcie: pcie-controller@180c0000 {
- compatible = "qcom,ar7240-pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0x0>;
- reg = <0x180c0000 0x1000>, /* CRP */
- <0x180f0000 0x100>, /* CTRL */
- <0x14000000 0x1000>; /* CFG */
- reg-names = "crp_base", "ctrl_base", "cfg_base";
- ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
- 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-map-mask = <0 0 0 1>;
- interrupt-map = <0 0 0 0 &pcie 0>;
- status = "disabled";
- };
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar7240-spi",
- "qca,ar7100-spi";
- reg = <0x1f000000 0x10>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "ahb";
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-&cpuintc {
- qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
- qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
- <&ddr_ctrl 0>, <&ddr_ctrl 1>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/ath79-clk.h>
-
-/ {
- compatible = "qca,ar9132";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips24Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- cpuintc: interrupt-controller {
- compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
- qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
- <&ddr_ctrl 0>, <&ddr_ctrl 1>;
- };
-
- ahb {
- compatible = "simple-bus";
- ranges;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
-
- apb {
- compatible = "simple-bus";
- ranges;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&miscintc>;
-
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar9132-ddr-controller",
- "qca,ar7240-ddr-controller";
- reg = <0x18000000 0x100>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "ns8250";
- reg = <0x18020000 0x20>;
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "uart";
-
- reg-io-width = <4>;
- reg-shift = <2>;
- no-loopback-test;
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar9132-gpio",
- "qca,ar7100-gpio";
- reg = <0x18040000 0x30>;
- interrupts = <2>;
-
- ngpios = <22>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,ar9132-pll",
- "qca,ar9130-pll";
- reg = <0x18050000 0x20>;
-
- clock-names = "ref";
- /* The board must provides the ref clock */
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
- };
-
- wdt: wdt@18060008 {
- compatible = "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-
- interrupts = <4>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "wdt";
- };
-
- miscintc: interrupt-controller@18060010 {
- compatible = "qca,ar9132-misc-intc",
- "qca,ar7100-misc-intc";
- reg = <0x18060010 0x8>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <6>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- rst: reset-controller@1806001c {
- compatible = "qca,ar9132-reset",
- "qca,ar7100-reset";
- reg = <0x1806001c 0x4>;
-
- #reset-cells = <1>;
- };
- };
-
- usb: usb@1b000100 {
- compatible = "qca,ar7100-ehci", "generic-ehci";
- reg = <0x1b000100 0x100>;
-
- interrupts = <3>;
- resets = <&rst 5>;
-
- has-transaction-translator;
-
- phy-names = "usb";
- phys = <&usb_phy>;
-
- status = "disabled";
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar9132-spi", "qca,ar7100-spi";
- reg = <0x1f000000 0x10>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "ahb";
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- usb_phy: usb-phy {
- compatible = "qca,ar7200-usb-phy";
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9132.dtsi"
-
-/ {
- compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
- model = "TP-Link TL-WR1043ND Version 1";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- button@1 {
- label = "qss";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led@0 {
- label = "tp-link:green:usb";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- led@1 {
- label = "tp-link:green:system";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
-
- led@2 {
- label = "tp-link:green:qss";
- gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
- };
-
- led@3 {
- label = "tp-link:green:wlan";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&usb {
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25sl064a";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@1 {
- label = "firmware";
- reg = <0x020000 0x7D0000>;
- };
-
- partition@2 {
- label = "art";
- reg = <0x7F0000 0x010000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
- compatible = "qca,ar9330";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips24Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- chosen {
- bootargs = "console=ttyATH0,115200";
- };
-
- ahb {
- apb {
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar7240-ddr-controller";
- reg = <0x18000000 0x100>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "qca,ar9330-uart";
- reg = <0x18020000 0x14>;
-
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_REF>;
- clock-names = "uart";
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar7100-gpio";
- reg = <0x18040000 0x34>;
- interrupts = <2>;
-
- ngpios = <30>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- status = "disabled";
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,ar9330-pll";
- reg = <0x18050000 0x100>;
-
- #clock-cells = <1>;
- };
-
- rst: reset-controller@1806001c {
- compatible = "qca,ar7100-reset";
- reg = <0x1806001c 0x4>;
-
- #reset-cells = <1>;
- };
- };
-
- usb: usb@1b000100 {
- compatible = "chipidea,usb2";
- reg = <0x1b000000 0x200>;
-
- interrupts = <3>;
- resets = <&rst 5>;
- reset-names = "usb-host";
-
- phy-names = "usb-phy";
- phys = <&usb_phy>;
-
- status = "disabled";
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar7100-spi";
- reg = <0x1f000000 0x10>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "ahb";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "disabled";
- };
-
- gmac: gmac@18070000 {
- compatible = "qca,ar9330-gmac";
- reg = <0x18070000 0x4>;
- };
- };
-
- usb_phy: usb-phy {
- compatible = "qca,ar7200-usb-phy";
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-};
-
-&cpuintc {
- qca,ddr-wb-channel-interrupts = <2>, <3>;
- qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
-};
-
-ð0 {
- compatible = "qca,ar9330-eth", "syscon";
-
- pll-data = <0x00110000 0x00001099 0x00991099>;
-
- resets = <&rst 9>;
- reset-names = "mac";
-};
-
-&mdio0 {
- regmap = <ð1>;
- builtin-switch;
- resets = <&rst 23>;
- reset-names = "mdio";
-};
-
-&mdio1 {
- resets = <&rst 23>;
- reset-names = "mdio";
-
- builtin-switch;
-};
-
-ð1 {
- compatible = "qca,ar9330-eth", "syscon";
-
- pll-data = <0x00110000 0x00001099 0x00991099>;
- phy-mode = "gmii";
-
- resets = <&rst 13>;
- reset-names = "mac";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9330.dtsi"
-
-/ {
- model = "GL.iNet GL-AR150";
- compatible = "glinet,ar150";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "gl-ar150:orange:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- lan {
- label = "gl-ar150:green:lan";
- gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- wan {
- label = "gl-ar150:green:wan";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- manual {
- label = "manual";
- linux,code = <BTN_7>;
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- };
-
- auto {
- label = "auto";
- linux,code = <BTN_8>;
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
- gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- spiflash {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition@3 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
-
- phy-handle = <&phy4>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <0>;
- switch-phy-swap = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "ar9330.dtsi"
-
-/ {
- compatible = "qca,ar9331";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "DPTechnics DPT-Module";
- compatible = "dptechnics,dpt-module";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system {
- label = "dpt-module:green:system";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Winbond 25Q128FVSG SPI flash */
- spiflash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "Dragino MS14 (Dragino 2)";
- compatible = "dragino,ms14";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "dragino2:red:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- lan {
- label = "dragino2:red:lan";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wan {
- label = "dragino2:red:wan";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- system {
- label = "dragino2:red:system";
- gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "jumpstart";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- button@1 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Winbond 25Q128BVFG SPI flash */
- spiflash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "Embedded Wireless Dorin";
- compatible = "embeddedwireless,dorin";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dorin:green:status";
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- spiflash {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition@3 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x1002>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <1>;
- switch-phy-swap = <1>;
- };
-};
-
-&mdio1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "Onion Omega";
- compatible = "onion,omega";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system {
- label = "onion:amber:system";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Winbond 25Q128FVSG SPI flash */
- spiflash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9331.dtsi"
-
-/ {
- model = "TP-Link TL-MR3020";
- compatible = "tplink,tl-mr3020";
-
- aliases {
- serial0 = &uart;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- lan {
- label = "tp-link:green:lan";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wps {
- label = "tp-link:green:wps";
- gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- led3g {
- label = "tp-link:green:3g";
- gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
-
- button@1 {
- label = "sw1";
- linux,code = <BTN_0>;
- gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
- };
-
- button@2 {
- label = "sw2";
- linux,code = <BTN_1>;
- gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- };
- };
-
- reg_usb_vbus: reg_usb_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- vbus-supply = <®_usb_vbus>;
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-chipselects = <1>;
- status = "okay";
-
- /* Spansion S25FL032PIF SPI flash */
- spiflash: s25sl032p@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl032p", "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpuintc: interrupt-controller {
- compatible = "qca,ar7100-cpu-intc";
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- ahb {
- compatible = "simple-bus";
- ranges;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
-
- apb {
- compatible = "simple-bus";
- ranges;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&miscintc>;
-
- miscintc: interrupt-controller@18060010 {
- compatible = "qca,ar7240-misc-intc";
- reg = <0x18060010 0x4>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <6>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- eth0: eth@19000000 {
- status = "disabled";
-
- compatible = "qca,ath79-eth", "syscon";
- reg = <0x19000000 0x200>;
-
- interrupts = <4>;
- phy-mode = "mii";
-
- mdio0: mdio-bus {
- status = "disabled";
-
- regmap = <ð0>;
-
- clocks = <&pll ATH79_CLK_MDIO>;
- clock-names = "ref";
- };
- };
-
- eth1: eth@1a000000 {
- status = "disabled";
-
- compatible = "qca,ath79-eth", "syscon";
- reg = <0x1a000000 0x200>;
-
- interrupts = <5>;
- phy-mode = "mii";
-
- mdio1: mdio-bus {
- status = "disabled";
-
- regmap = <ð1>;
-
- clocks = <&pll ATH79_CLK_MDIO>;
- clock-names = "ref";
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
- compatible = "qca,qca9557";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips24Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- ahb {
- apb {
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar9557-ddr-controller",
- "qca,ar7240-ddr-controller";
- reg = <0x18000000 0x100>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "ns16550a";
- reg = <0x18020000 0x20>;
-
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_REF>;
- clock-names = "uart";
-
- reg-io-width = <4>;
- reg-shift = <2>;
- no-loopback-test;
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar9557-gpio",
- "qca,ar9340-gpio";
- reg = <0x18040000 0x28>;
-
- interrupts = <2>;
- ngpios = <24>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pinmux: pinmux@1804002c {
- compatible = "pinctrl-single";
-
- reg = <0x1804002c 0x40>;
-
- #size-cells = <0>;
-
- pinctrl-single,bit-per-mux;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x1>;
- #pinctrl-cells = <2>;
-
- jtag_disable_pins: pinmux_jtag_disable_pins {
- pinctrl-single,bits = <0x40 0x2 0x2>;
- };
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,ar9557-pll",
- "qca,qca9550-pll";
- reg = <0x18050000 0x20>;
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
- };
-
- wdt: wdt@18060008 {
- compatible = "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-
- interrupts = <4>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "wdt";
- };
-
- rst: reset-controller@1806001c {
- compatible = "qca,ar9557-reset",
- "qca,ar7100-reset",
- "simple-bus";
- reg = <0x1806001c 0x4>;
-
- #reset-cells = <1>;
- interrupt-parent = <&cpuintc>;
-
- intc2: interrupt-controller@2 {
- compatible = "qcom,qca9556-intc";
-
- interrupts = <2>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- qcom,pending-bits = <0x1f0>, /* pcie rc1 */
- <0xf>; /* wmac */
- };
-
- intc3: interrupt-controller@3 {
- compatible = "qcom,qca9556-intc";
-
- interrupts = <3>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- qcom,pending-bits = <0x1f000>, /* pcie rc2 */
- <0x1000000>, /* usb1 */
- <0x10000000>; /* usb2 */
- };
- };
-
- pcie0: pcie-controller@180c0000 {
- compatible = "qcom,ar7240-pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0x0>;
- reg = <0x180c0000 0x1000>, /* CRP */
- <0x180f0000 0x100>, /* CTRL */
- <0x14000000 0x1000>; /* CFG */
- reg-names = "crp_base", "ctrl_base", "cfg_base";
- ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
- 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
- interrupt-parent = <&intc2>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-map-mask = <0 0 0 1>;
- interrupt-map = <0 0 0 0 &pcie0 0>;
- status = "disabled";
- };
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar9557-spi", "qca,ar7100-spi";
- reg = <0x1f000000 0x10>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "ahb";
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-&mdio0 {
- resets = <&rst 22>;
- reset-names = "mdio";
-};
-
-ð0 {
- compatible = "qca,qca9550-eth", "syscon";
-
- pll-data = <0x82000101 0x80000101 0x80001313>;
- phy-mode = "rgmii";
-
- resets = <&rst 9>;
- reset-names = "mac";
-};
-
-&mdio1 {
- resets = <&rst 23>;
- reset-names = "mdio";
-};
-
-ð1 {
- compatible = "qca,qca9550-eth", "syscon";
-
- pll-data = <0x82000101 0x80000101 0x80001313>;
- phy-mode = "sgmii";
-
- resets = <&rst 13>;
- reset-names = "mac";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9557.dtsi"
-
-/ {
- compatible = "openmesh,om5p-ac-v2", "qca,qca9557";
- model = "OpenMesh OM5P-AC V2";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "om5pac:blue:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wifi_green {
- label = "om5pac:green:wifi";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wifi_yellow {
- label = "om5pac:yellow:wifi";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- wifi_red {
- label = "om5pac:red:wifi";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_pa_dcdc {
- gpio-export,name = "om5pac:pa_dcdc";
- gpio-export,output = <1>;
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
- };
- gpio_pa_high {
- gpio-export,name = "om5pac:pa_high";
- gpio-export,output = <1>;
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinmux {
- pinmux_pa_dcdc_pins {
- pinctrl-single,bits = <0x0 0xff00 0x0>;
- };
-
- pinmux_pa_high_pins {
- pinctrl-single,bits = <0x10 0xff 0x0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l12805d";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x850000 0x7a0000>;
- };
-
- partition@3 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii-id";
- };
-};
-
-&mdio1 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "sgmii";
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
-};
-
-ð1 {
- status = "okay";
-
- phy-handle = <&phy1>;
- phy-mode = "sgmii";
-};
+++ /dev/null
-/*
- * Atheros AP94 reference board PCI initialization
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-struct ath9k_fixup {
- u16 *cal_data;
- unsigned slot;
-};
-
-static int ath9k_num_fixups;
-static struct ath9k_fixup ath9k_fixups[2];
-
-static void ath9k_pci_fixup(struct pci_dev *dev)
-{
- void __iomem *mem;
- u16 *cal_data = NULL;
- u16 cmd;
- u32 bar0;
- u32 val;
- unsigned i;
-
- for (i = 0; i < ath9k_num_fixups; i++) {
- if (ath9k_fixups[i].cal_data == NULL)
- continue;
-
- if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
- continue;
-
- cal_data = ath9k_fixups[i].cal_data;
- break;
- }
-
- if (cal_data == NULL)
- return;
-
- if (*cal_data != 0xa55a) {
- pr_err("pci %s: invalid calibration data\n", pci_name(dev));
- return;
- }
-
- pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-
- mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
- if (!mem) {
- pr_err("pci %s: ioremap error\n", pci_name(dev));
- return;
- }
-
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7161:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
- AR71XX_PCI_MEM_BASE);
- break;
- case ATH79_SOC_AR7240:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
- break;
-
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR7242:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
- break;
- case ATH79_SOC_AR9344:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
- break;
-
- default:
- BUG();
- }
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- /* set pointer to first reg address */
- cal_data += 3;
- while (*cal_data != 0xffff) {
- u32 reg;
- reg = *cal_data++;
- val = *cal_data++;
- val |= (*cal_data++) << 16;
-
- __raw_writel(val, mem + reg);
- udelay(100);
- }
-
- pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
- dev->vendor = val & 0xffff;
- dev->device = (val >> 16) & 0xffff;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
- dev->revision = val & 0xff;
- dev->class = val >> 8; /* upper 3 bytes */
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-
- iounmap(mem);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-
-void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
-{
- if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- return;
-
- ath9k_fixups[ath9k_num_fixups].slot = slot;
- ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
- ath9k_num_fixups++;
-}
+++ /dev/null
-#ifndef _PCI_ATH9K_FIXUP
-#define _PCI_ATH9K_FIXUP
-
-void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
-
-#endif /* _PCI_ATH9K_FIXUP */
+++ /dev/null
-/*
- * Compex's MyLoader specific definitions
- *
- * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_FW_MYLOADER_H
-#define _ASM_MIPS_FW_MYLOADER_H
-
-#include <linux/myloader.h>
-
-struct myloader_info {
- uint32_t vid;
- uint32_t did;
- uint32_t svid;
- uint32_t sdid;
- uint8_t macs[MYLO_ETHADDR_COUNT][6];
-};
-
-#ifdef CONFIG_MYLOADER
-extern struct myloader_info *myloader_get_info(void) __init;
-#else
-static inline struct myloader_info *myloader_get_info(void)
-{
- return NULL;
-}
-#endif /* CONFIG_MYLOADER */
-
-#endif /* _ASM_MIPS_FW_MYLOADER_H */
+++ /dev/null
-/*
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/magic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/version.h>
-
-#define TPLINK_NUM_PARTS 5
-#define TPLINK_HEADER_V1 0x01000000
-#define TPLINK_HEADER_V2 0x02000000
-#define MD5SUM_LEN 16
-
-#define TPLINK_ART_LEN 0x10000
-#define TPLINK_KERNEL_OFFS 0x20000
-#define TPLINK_64K_KERNEL_OFFS 0x10000
-
-struct tplink_fw_header {
- uint32_t version; /* header version */
- char vendor_name[24];
- char fw_version[36];
- uint32_t hw_id; /* hardware id */
- uint32_t hw_rev; /* hardware revision */
- uint32_t unk1;
- uint8_t md5sum1[MD5SUM_LEN];
- uint32_t unk2;
- uint8_t md5sum2[MD5SUM_LEN];
- uint32_t unk3;
- uint32_t kernel_la; /* kernel load address */
- uint32_t kernel_ep; /* kernel entry point */
- uint32_t fw_length; /* total length of the firmware */
- uint32_t kernel_ofs; /* kernel data offset */
- uint32_t kernel_len; /* kernel data length */
- uint32_t rootfs_ofs; /* rootfs data offset */
- uint32_t rootfs_len; /* rootfs data length */
- uint32_t boot_ofs; /* bootloader data offset */
- uint32_t boot_len; /* bootloader data length */
- uint8_t pad[360];
-} __attribute__ ((packed));
-
-static struct tplink_fw_header *
-tplink_read_header(struct mtd_info *mtd, size_t offset)
-{
- struct tplink_fw_header *header;
- size_t header_len;
- size_t retlen;
- int ret;
- u32 t;
-
- header = vmalloc(sizeof(*header));
- if (!header)
- goto err;
-
- header_len = sizeof(struct tplink_fw_header);
- ret = mtd_read(mtd, offset, header_len, &retlen,
- (unsigned char *) header);
- if (ret)
- goto err_free_header;
-
- if (retlen != header_len)
- goto err_free_header;
-
- /* sanity checks */
- t = be32_to_cpu(header->version);
- if ((t != TPLINK_HEADER_V1) && (t != TPLINK_HEADER_V2))
- goto err_free_header;
-
- t = be32_to_cpu(header->kernel_ofs);
- if (t != header_len)
- goto err_free_header;
-
- return header;
-
-err_free_header:
- vfree(header);
-err:
- return NULL;
-}
-
-static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
-{
- u32 magic;
- size_t retlen;
- int ret;
-
- ret = mtd_read(mtd, offset, sizeof(magic), &retlen,
- (unsigned char *) &magic);
- if (ret)
- return ret;
-
- if (retlen != sizeof(magic))
- return -EIO;
-
- if (le32_to_cpu(magic) != SQUASHFS_MAGIC &&
- magic != 0x19852003)
- return -EINVAL;
-
- return 0;
-}
-
-static int tplink_parse_partitions_offset(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data,
- size_t offset)
-{
- struct mtd_partition *parts;
- struct tplink_fw_header *header;
- int nr_parts;
- size_t art_offset;
- size_t rootfs_offset;
- size_t squashfs_offset;
- int ret;
-
- nr_parts = TPLINK_NUM_PARTS;
- parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL);
- if (!parts) {
- ret = -ENOMEM;
- goto err;
- }
-
- header = tplink_read_header(master, offset);
- if (!header) {
- pr_notice("%s: no TP-Link header found\n", master->name);
- ret = -ENODEV;
- goto err_free_parts;
- }
-
- squashfs_offset = offset + sizeof(struct tplink_fw_header) +
- be32_to_cpu(header->kernel_len);
-
- ret = tplink_check_rootfs_magic(master, squashfs_offset);
- if (ret == 0)
- rootfs_offset = squashfs_offset;
- else
- rootfs_offset = offset + be32_to_cpu(header->rootfs_ofs);
-
- art_offset = master->size - TPLINK_ART_LEN;
-
- parts[0].name = "u-boot";
- parts[0].offset = 0;
- parts[0].size = offset;
- parts[0].mask_flags = MTD_WRITEABLE;
-
- parts[1].name = "kernel";
- parts[1].offset = offset;
- parts[1].size = rootfs_offset - offset;
-
- parts[2].name = "rootfs";
- parts[2].offset = rootfs_offset;
- parts[2].size = art_offset - rootfs_offset;
-
- parts[3].name = "art";
- parts[3].offset = art_offset;
- parts[3].size = TPLINK_ART_LEN;
- parts[3].mask_flags = MTD_WRITEABLE;
-
- parts[4].name = "firmware";
- parts[4].offset = offset;
- parts[4].size = art_offset - offset;
-
- vfree(header);
-
- *pparts = parts;
- return nr_parts;
-
-err_free_parts:
- kfree(parts);
-err:
- *pparts = NULL;
- return ret;
-}
-
-static int tplink_parse_partitions(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data)
-{
- return tplink_parse_partitions_offset(master, pparts, data,
- TPLINK_KERNEL_OFFS);
-}
-
-static int tplink_parse_64k_partitions(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data)
-{
- return tplink_parse_partitions_offset(master, pparts, data,
- TPLINK_64K_KERNEL_OFFS);
-}
-
-static struct mtd_part_parser tplink_parser = {
- .owner = THIS_MODULE,
- .parse_fn = tplink_parse_partitions,
- .name = "tp-link",
-};
-
-static struct mtd_part_parser tplink_64k_parser = {
- .owner = THIS_MODULE,
- .parse_fn = tplink_parse_64k_partitions,
- .name = "tp-link-64k",
-};
-
-static int __init tplink_parser_init(void)
-{
- register_mtd_parser(&tplink_parser);
- register_mtd_parser(&tplink_64k_parser);
-
- return 0;
-}
-
-module_init(tplink_parser_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+++ /dev/null
-/*
- * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
- * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This driver was base on: net/dsa/mv88e6060.c
- * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/version.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include <linux/version.h>
-
-#define REG_BASE 0x10
-#define REG_PHY(p) (REG_BASE + (p))
-#define REG_PORT(p) (REG_BASE + 8 + (p))
-#define REG_GLOBAL (REG_BASE + 0x0f)
-#define NUM_PORTS 7
-
-static int reg_read(struct dsa_switch *ds, int addr, int reg)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
- return mdiobus_read(bus, addr, reg);
-#else
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
- return mdiobus_read(bus, addr, reg);
-#endif
-}
-
-#define REG_READ(addr, reg) \
- ({ \
- int __ret; \
- \
- __ret = reg_read(ds, addr, reg); \
- if (__ret < 0) \
- return __ret; \
- __ret; \
- })
-
-
-static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
- return mdiobus_write(bus, addr, reg, val);
-#else
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
- return mdiobus_write(bus, addr, reg, val);
-#endif
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0)
-static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds)
-{
- return DSA_TAG_PROTO_TRAILER;
-}
-#endif
-
-#define REG_WRITE(addr, reg, val) \
- ({ \
- int __ret; \
- \
- __ret = reg_write(ds, addr, reg, val); \
- if (__ret < 0) \
- return __ret; \
- })
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
-static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr)
-#else
-static const char *mv88e6063_drv_probe(struct device *dsa_dev,
- struct device *host_dev, int sw_addr,
- void **_priv)
-#endif
-{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
- int ret;
-
- if (!bus)
- return NULL;
-
- ret = mdiobus_read(bus, REG_PORT(0), 0x03);
- if (ret >= 0) {
- ret &= 0xfff0;
- if (ret == 0x1530)
- return "Marvell 88E6063";
- }
-
- return NULL;
-}
-
-static int mv88e6063_switch_reset(struct dsa_switch *ds)
-{
- int i;
- int ret;
-
- /*
- * Set all ports to the disabled state.
- */
- for (i = 0; i < NUM_PORTS; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
- }
-
- /*
- * Wait for transmit queues to drain.
- */
- msleep(2);
-
- /*
- * Reset the switch.
- */
- REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
-
- /*
- * Wait up to one second for reset to complete.
- */
- for (i = 0; i < 1000; i++) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0x8000) == 0x0000)
- break;
-
- msleep(1);
- }
- if (i == 1000)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-static int mv88e6063_setup_global(struct dsa_switch *ds)
-{
- /*
- * Disable discarding of frames with excessive collisions,
- * set the maximum frame size to 1536 bytes, and mask all
- * interrupt sources.
- */
- REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
-
- /*
- * Enable automatic address learning, set the address
- * database size to 1024 entries, and set the default aging
- * time to 5 minutes.
- */
- REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
-
- return 0;
-}
-
-static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
-{
- int addr = REG_PORT(p);
-
- /*
- * Do not force flow control, disable Ingress and Egress
- * Header tagging, disable VLAN tunneling, and set the port
- * state to Forwarding. Additionally, if this is the CPU
- * port, enable Ingress and Egress Trailer tagging mode.
- */
- REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
-
- /*
- * Port based VLAN map: give each port its own address
- * database, allow the CPU port to talk to each of the 'real'
- * ports, and allow each of the 'real' ports to only talk to
- * the CPU port.
- */
- REG_WRITE(addr, 0x06,
- ((p & 0xf) << 12) |
- (dsa_is_cpu_port(ds, p) ?
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
- ds->phys_port_mask :
-#else
- ds->enabled_port_mask :
-#endif
- (1 << ds->dst->cpu_port)));
-
- /*
- * Port Association Vector: when learning source addresses
- * of packets, add the address to the address database using
- * a port bitmap that has only the bit for this port set and
- * the other bits clear.
- */
- REG_WRITE(addr, 0x0b, 1 << p);
-
- return 0;
-}
-
-static int mv88e6063_setup(struct dsa_switch *ds)
-{
- int i;
- int ret;
-
- ret = mv88e6063_switch_reset(ds);
- if (ret < 0)
- return ret;
-
- /* @@@ initialise atu */
-
- ret = mv88e6063_setup_global(ds);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < NUM_PORTS; i++) {
- ret = mv88e6063_setup_port(ds, i);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
-{
- REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
- REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
- REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
-
- return 0;
-}
-
-static int mv88e6063_port_to_phy_addr(int port)
-{
- if (port >= 0 && port <= NUM_PORTS)
- return REG_PHY(port);
- return -1;
-}
-
-static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
- int addr;
-
- addr = mv88e6063_port_to_phy_addr(port);
- if (addr == -1)
- return 0xffff;
-
- return reg_read(ds, addr, regnum);
-}
-
-static int
-mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
-{
- int addr;
-
- addr = mv88e6063_port_to_phy_addr(port);
- if (addr == -1)
- return 0xffff;
-
- return reg_write(ds, addr, regnum, val);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0)
-static struct dsa_switch_driver mv88e6063_switch_ops = {
-#else
-static struct dsa_switch_ops mv88e6063_switch_ops = {
-#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0)
- .tag_protocol = htons(ETH_P_TRAILER),
-#else
- .get_tag_protocol = mv88e6063_get_tag_protocol,
-#endif
- .probe = mv88e6063_drv_probe,
- .setup = mv88e6063_setup,
- .set_addr = mv88e6063_set_addr,
- .phy_read = mv88e6063_phy_read,
- .phy_write = mv88e6063_phy_write,
-};
-
-static int __init mv88e6063_init(void)
-{
- register_switch_driver(&mv88e6063_switch_ops);
- return 0;
-}
-module_init(mv88e6063_init);
-
-static void __exit mv88e6063_cleanup(void)
-{
- unregister_switch_driver(&mv88e6063_switch_ops);
-}
-module_exit(mv88e6063_cleanup);
+++ /dev/null
-config AG71XX
- tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
- depends on ATH79
- select PHYLIB
- help
- If you wish to compile a kernel for AR7XXX/91XXX and enable
- ethernet support, then you should always answer Y to this.
-
-if AG71XX
-
-config AG71XX_DEBUG
- bool "Atheros AR71xx built-in ethernet driver debugging"
- default n
- help
- Atheros AR71xx built-in ethernet driver debugging messages.
-
-config AG71XX_DEBUG_FS
- bool "Atheros AR71xx built-in ethernet driver debugfs support"
- depends on DEBUG_FS
- default n
- help
- Say Y, if you need access to various statistics provided by
- the ag71xx driver.
-
-endif
+++ /dev/null
-#
-# Makefile for the Atheros AR71xx built-in ethernet macs
-#
-
-ag71xx-y += ag71xx_main.o
-ag71xx-y += ag71xx_ethtool.o
-ag71xx-y += ag71xx_phy.o
-ag71xx-y += ag71xx_mdio.o
-ag71xx-y += ag71xx_ar7240.o
-
-ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o
-
-obj-$(CONFIG_AG71XX) += ag71xx.o
-
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __AG71XX_H
-#define __AG71XX_H
-
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/etherdevice.h>
-#include <linux/if_vlan.h>
-#include <linux/phy.h>
-#include <linux/skbuff.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-#include <linux/reset.h>
-#include <linux/of.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-
-#include <linux/bitops.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#define AG71XX_DRV_NAME "ag71xx"
-
-/*
- * For our NAPI weight bigger does *NOT* mean better - it means more
- * D-cache misses and lots more wasted cycles than we'll ever
- * possibly gain from saving instructions.
- */
-#define AG71XX_NAPI_WEIGHT 32
-#define AG71XX_OOM_REFILL (1 + HZ/10)
-
-#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
-#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
-#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
-
-#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
-#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
-
-#define AG71XX_TX_MTU_LEN 1540
-
-#define AG71XX_TX_RING_SPLIT 512
-#define AG71XX_TX_RING_DS_PER_PKT DIV_ROUND_UP(AG71XX_TX_MTU_LEN, \
- AG71XX_TX_RING_SPLIT)
-#define AG71XX_TX_RING_SIZE_DEFAULT 128
-#define AG71XX_RX_RING_SIZE_DEFAULT 256
-
-#define AG71XX_TX_RING_SIZE_MAX 128
-#define AG71XX_RX_RING_SIZE_MAX 256
-
-#ifdef CONFIG_AG71XX_DEBUG
-#define DBG(fmt, args...) pr_debug(fmt, ## args)
-#else
-#define DBG(fmt, args...) do {} while (0)
-#endif
-
-#define ag71xx_assert(_cond) \
-do { \
- if (_cond) \
- break; \
- printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
- BUG(); \
-} while (0)
-
-struct ag71xx_desc {
- u32 data;
- u32 ctrl;
-#define DESC_EMPTY BIT(31)
-#define DESC_MORE BIT(24)
-#define DESC_PKTLEN_M 0xfff
- u32 next;
- u32 pad;
-} __attribute__((aligned(4)));
-
-#define AG71XX_DESC_SIZE roundup(sizeof(struct ag71xx_desc), \
- L1_CACHE_BYTES)
-
-struct ag71xx_buf {
- union {
- struct sk_buff *skb;
- void *rx_buf;
- };
- union {
- dma_addr_t dma_addr;
- unsigned int len;
- };
-};
-
-struct ag71xx_ring {
- struct ag71xx_buf *buf;
- u8 *descs_cpu;
- dma_addr_t descs_dma;
- u16 desc_split;
- u16 order;
- unsigned int curr;
- unsigned int dirty;
-};
-
-struct ag71xx_int_stats {
- unsigned long rx_pr;
- unsigned long rx_be;
- unsigned long rx_of;
- unsigned long tx_ps;
- unsigned long tx_be;
- unsigned long tx_ur;
- unsigned long total;
-};
-
-struct ag71xx_napi_stats {
- unsigned long napi_calls;
- unsigned long rx_count;
- unsigned long rx_packets;
- unsigned long rx_packets_max;
- unsigned long tx_count;
- unsigned long tx_packets;
- unsigned long tx_packets_max;
-
- unsigned long rx[AG71XX_NAPI_WEIGHT + 1];
- unsigned long tx[AG71XX_NAPI_WEIGHT + 1];
-};
-
-struct ag71xx_debug {
- struct dentry *debugfs_dir;
-
- struct ag71xx_int_stats int_stats;
- struct ag71xx_napi_stats napi_stats;
-};
-
-struct ag71xx {
- /*
- * Critical data related to the per-packet data path are clustered
- * early in this structure to help improve the D-cache footprint.
- */
- struct ag71xx_ring rx_ring ____cacheline_aligned;
- struct ag71xx_ring tx_ring ____cacheline_aligned;
-
- u16 desc_pktlen_mask;
- u16 rx_buf_size;
- u8 rx_buf_offset;
- u8 tx_hang_workaround:1;
-
- struct net_device *dev;
- struct platform_device *pdev;
- spinlock_t lock;
- struct napi_struct napi;
- u32 msg_enable;
-
- /*
- * From this point onwards we're not looking at per-packet fields.
- */
- void __iomem *mac_base;
- void __iomem *mii_base;
- struct regmap *mii_regmap;
-
- struct ag71xx_desc *stop_desc;
- dma_addr_t stop_desc_dma;
-
- struct mii_bus *mii_bus;
- struct phy_device *phy_dev;
- void *phy_priv;
- int phy_if_mode;
-
- unsigned int link;
- unsigned int speed;
- int duplex;
-
- struct delayed_work restart_work;
- struct timer_list oom_timer;
-
- struct reset_control *mac_reset;
- struct reset_control *phy_reset;
- struct reset_control *mdio_reset;
-
- u32 fifodata[3];
- u32 plldata[3];
- u32 pllreg[3];
- struct regmap *pllregmap;
-
-#ifdef CONFIG_AG71XX_DEBUG_FS
- struct ag71xx_debug debug;
-#endif
-};
-
-extern struct ethtool_ops ag71xx_ethtool_ops;
-void ag71xx_link_adjust(struct ag71xx *ag);
-
-int ag71xx_phy_connect(struct ag71xx *ag);
-void ag71xx_phy_disconnect(struct ag71xx *ag);
-
-static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
-{
- return (desc->ctrl & DESC_EMPTY) != 0;
-}
-
-static inline struct ag71xx_desc *
-ag71xx_ring_desc(struct ag71xx_ring *ring, int idx)
-{
- return (struct ag71xx_desc *) &ring->descs_cpu[idx * AG71XX_DESC_SIZE];
-}
-
-static inline int
-ag71xx_ring_size_order(int size)
-{
- return fls(size - 1);
-}
-
-/* Register offsets */
-#define AG71XX_REG_MAC_CFG1 0x0000
-#define AG71XX_REG_MAC_CFG2 0x0004
-#define AG71XX_REG_MAC_IPG 0x0008
-#define AG71XX_REG_MAC_HDX 0x000c
-#define AG71XX_REG_MAC_MFL 0x0010
-#define AG71XX_REG_MII_CFG 0x0020
-#define AG71XX_REG_MII_CMD 0x0024
-#define AG71XX_REG_MII_ADDR 0x0028
-#define AG71XX_REG_MII_CTRL 0x002c
-#define AG71XX_REG_MII_STATUS 0x0030
-#define AG71XX_REG_MII_IND 0x0034
-#define AG71XX_REG_MAC_IFCTL 0x0038
-#define AG71XX_REG_MAC_ADDR1 0x0040
-#define AG71XX_REG_MAC_ADDR2 0x0044
-#define AG71XX_REG_FIFO_CFG0 0x0048
-#define AG71XX_REG_FIFO_CFG1 0x004c
-#define AG71XX_REG_FIFO_CFG2 0x0050
-#define AG71XX_REG_FIFO_CFG3 0x0054
-#define AG71XX_REG_FIFO_CFG4 0x0058
-#define AG71XX_REG_FIFO_CFG5 0x005c
-#define AG71XX_REG_FIFO_RAM0 0x0060
-#define AG71XX_REG_FIFO_RAM1 0x0064
-#define AG71XX_REG_FIFO_RAM2 0x0068
-#define AG71XX_REG_FIFO_RAM3 0x006c
-#define AG71XX_REG_FIFO_RAM4 0x0070
-#define AG71XX_REG_FIFO_RAM5 0x0074
-#define AG71XX_REG_FIFO_RAM6 0x0078
-#define AG71XX_REG_FIFO_RAM7 0x007c
-
-#define AG71XX_REG_TX_CTRL 0x0180
-#define AG71XX_REG_TX_DESC 0x0184
-#define AG71XX_REG_TX_STATUS 0x0188
-#define AG71XX_REG_RX_CTRL 0x018c
-#define AG71XX_REG_RX_DESC 0x0190
-#define AG71XX_REG_RX_STATUS 0x0194
-#define AG71XX_REG_INT_ENABLE 0x0198
-#define AG71XX_REG_INT_STATUS 0x019c
-
-#define AG71XX_REG_FIFO_DEPTH 0x01a8
-#define AG71XX_REG_RX_SM 0x01b0
-#define AG71XX_REG_TX_SM 0x01b4
-
-#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
-#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
-#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
-#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
-#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
-#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
-#define MAC_CFG1_LB BIT(8) /* Loopback mode */
-#define MAC_CFG1_SR BIT(31) /* Soft Reset */
-
-#define MAC_CFG2_FDX BIT(0)
-#define MAC_CFG2_CRC_EN BIT(1)
-#define MAC_CFG2_PAD_CRC_EN BIT(2)
-#define MAC_CFG2_LEN_CHECK BIT(4)
-#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
-#define MAC_CFG2_IF_1000 BIT(9)
-#define MAC_CFG2_IF_10_100 BIT(8)
-
-#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
-#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
-#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
-#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
-#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
-#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
- | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
-
-#define FIFO_CFG0_ENABLE_SHIFT 8
-
-#define FIFO_CFG4_DE BIT(0) /* Drop Event */
-#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG4_FC BIT(2) /* False Carrier */
-#define FIFO_CFG4_CE BIT(3) /* Code Error */
-#define FIFO_CFG4_CR BIT(4) /* CRC error */
-#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
-#define FIFO_CFG4_LO BIT(6) /* Length out of range */
-#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
-#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
-#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
-#define FIFO_CFG4_DR BIT(10) /* Dribble */
-#define FIFO_CFG4_LE BIT(11) /* Long Event */
-#define FIFO_CFG4_CF BIT(12) /* Control Frame */
-#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
-#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
-#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
-#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
-#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
-
-#define FIFO_CFG5_DE BIT(0) /* Drop Event */
-#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG5_FC BIT(2) /* False Carrier */
-#define FIFO_CFG5_CE BIT(3) /* Code Error */
-#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
-#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
-#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
-#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
-#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
-#define FIFO_CFG5_DR BIT(9) /* Dribble */
-#define FIFO_CFG5_CF BIT(10) /* Control Frame */
-#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
-#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
-#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
-#define FIFO_CFG5_LE BIT(14) /* Long Event */
-#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
-#define FIFO_CFG5_16 BIT(16) /* unknown */
-#define FIFO_CFG5_17 BIT(17) /* unknown */
-#define FIFO_CFG5_SF BIT(18) /* Short Frame */
-#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
-
-#define AG71XX_INT_TX_PS BIT(0)
-#define AG71XX_INT_TX_UR BIT(1)
-#define AG71XX_INT_TX_BE BIT(3)
-#define AG71XX_INT_RX_PR BIT(4)
-#define AG71XX_INT_RX_OF BIT(6)
-#define AG71XX_INT_RX_BE BIT(7)
-
-#define MAC_IFCTL_SPEED BIT(16)
-
-#define MII_CFG_CLK_DIV_4 0
-#define MII_CFG_CLK_DIV_6 2
-#define MII_CFG_CLK_DIV_8 3
-#define MII_CFG_CLK_DIV_10 4
-#define MII_CFG_CLK_DIV_14 5
-#define MII_CFG_CLK_DIV_20 6
-#define MII_CFG_CLK_DIV_28 7
-#define MII_CFG_CLK_DIV_34 8
-#define MII_CFG_CLK_DIV_42 9
-#define MII_CFG_CLK_DIV_50 10
-#define MII_CFG_CLK_DIV_58 11
-#define MII_CFG_CLK_DIV_66 12
-#define MII_CFG_CLK_DIV_74 13
-#define MII_CFG_CLK_DIV_82 14
-#define MII_CFG_CLK_DIV_98 15
-#define MII_CFG_RESET BIT(31)
-
-#define MII_CMD_WRITE 0x0
-#define MII_CMD_READ 0x1
-#define MII_ADDR_SHIFT 8
-#define MII_IND_BUSY BIT(0)
-#define MII_IND_INVALID BIT(2)
-
-#define TX_CTRL_TXE BIT(0) /* Tx Enable */
-
-#define TX_STATUS_PS BIT(0) /* Packet Sent */
-#define TX_STATUS_UR BIT(1) /* Tx Underrun */
-#define TX_STATUS_BE BIT(3) /* Bus Error */
-
-#define RX_CTRL_RXE BIT(0) /* Rx Enable */
-
-#define RX_STATUS_PR BIT(0) /* Packet Received */
-#define RX_STATUS_OF BIT(2) /* Rx Overflow */
-#define RX_STATUS_BE BIT(3) /* Bus Error */
-
-static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
-{
- __raw_writel(value, ag->mac_base + reg);
- /* flush write */
- (void) __raw_readl(ag->mac_base + reg);
-}
-
-static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
-{
- return __raw_readl(ag->mac_base + reg);
-}
-
-static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- void __iomem *r;
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) | mask, r);
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- void __iomem *r;
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) & ~mask, r);
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-#ifdef CONFIG_AG71XX_DEBUG_FS
-int ag71xx_debugfs_root_init(void);
-void ag71xx_debugfs_root_exit(void);
-int ag71xx_debugfs_init(struct ag71xx *ag);
-void ag71xx_debugfs_exit(struct ag71xx *ag);
-void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
-void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
-#else
-static inline int ag71xx_debugfs_root_init(void) { return 0; }
-static inline void ag71xx_debugfs_root_exit(void) {}
-static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
-static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
-static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
- u32 status) {}
-static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
- int rx, int tx) {}
-#endif /* CONFIG_AG71XX_DEBUG_FS */
-
-int ag71xx_ar7240_init(struct ag71xx *ag, struct device_node *np);
-void ag71xx_ar7240_cleanup(struct ag71xx *ag);
-void ag71xx_ar7240_start(struct ag71xx *ag);
-
-int ag71xx_mdio_init(struct ag71xx *ag);
-void ag71xx_mdio_cleanup(struct ag71xx *ag);
-int ag71xx_mdio_mii_read(struct mii_bus *bus, int addr, int reg);
-int ag71xx_mdio_mii_write(struct mii_bus *bus, int addr, int reg, u16 val);
-
-int ar7240sw_phy_read(struct mii_bus *mii, int addr, int reg);
-int ar7240sw_phy_write(struct mii_bus *mii, int addr, int reg, u16 val);
-
-#endif /* _AG71XX_H */
+++ /dev/null
-/*
- * Driver for the built-in ethernet switch of the Atheros AR7240 SoC
- * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2010 Felix Fietkau <nbd@nbd.name>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/etherdevice.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <linux/mii.h>
-#include <linux/bitops.h>
-#include <linux/switch.h>
-#include "ag71xx.h"
-
-#define BITM(_count) (BIT(_count) - 1)
-#define BITS(_shift, _count) (BITM(_count) << _shift)
-
-#define AR7240_REG_MASK_CTRL 0x00
-#define AR7240_MASK_CTRL_REVISION_M BITM(8)
-#define AR7240_MASK_CTRL_VERSION_M BITM(8)
-#define AR7240_MASK_CTRL_VERSION_S 8
-#define AR7240_MASK_CTRL_VERSION_AR7240 0x01
-#define AR7240_MASK_CTRL_VERSION_AR934X 0x02
-#define AR7240_MASK_CTRL_SOFT_RESET BIT(31)
-
-#define AR7240_REG_MAC_ADDR0 0x20
-#define AR7240_REG_MAC_ADDR1 0x24
-
-#define AR7240_REG_FLOOD_MASK 0x2c
-#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26)
-
-#define AR7240_REG_GLOBAL_CTRL 0x30
-#define AR7240_GLOBAL_CTRL_MTU_M BITM(11)
-#define AR9340_GLOBAL_CTRL_MTU_M BITM(14)
-
-#define AR7240_REG_VTU 0x0040
-#define AR7240_VTU_OP BITM(3)
-#define AR7240_VTU_OP_NOOP 0x0
-#define AR7240_VTU_OP_FLUSH 0x1
-#define AR7240_VTU_OP_LOAD 0x2
-#define AR7240_VTU_OP_PURGE 0x3
-#define AR7240_VTU_OP_REMOVE_PORT 0x4
-#define AR7240_VTU_ACTIVE BIT(3)
-#define AR7240_VTU_FULL BIT(4)
-#define AR7240_VTU_PORT BITS(8, 4)
-#define AR7240_VTU_PORT_S 8
-#define AR7240_VTU_VID BITS(16, 12)
-#define AR7240_VTU_VID_S 16
-#define AR7240_VTU_PRIO BITS(28, 3)
-#define AR7240_VTU_PRIO_S 28
-#define AR7240_VTU_PRIO_EN BIT(31)
-
-#define AR7240_REG_VTU_DATA 0x0044
-#define AR7240_VTUDATA_MEMBER BITS(0, 10)
-#define AR7240_VTUDATA_VALID BIT(11)
-
-#define AR7240_REG_ATU 0x50
-#define AR7240_ATU_FLUSH_ALL 0x1
-
-#define AR7240_REG_AT_CTRL 0x5c
-#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15)
-#define AR7240_AT_CTRL_AGE_EN BIT(17)
-#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18)
-#define AR7240_AT_CTRL_RESERVED BIT(19)
-#define AR7240_AT_CTRL_ARP_EN BIT(20)
-
-#define AR7240_REG_TAG_PRIORITY 0x70
-
-#define AR7240_REG_SERVICE_TAG 0x74
-#define AR7240_SERVICE_TAG_M BITM(16)
-
-#define AR7240_REG_CPU_PORT 0x78
-#define AR7240_MIRROR_PORT_S 4
-#define AR7240_MIRROR_PORT_M BITM(4)
-#define AR7240_CPU_PORT_EN BIT(8)
-
-#define AR7240_REG_MIB_FUNCTION0 0x80
-#define AR7240_MIB_TIMER_M BITM(16)
-#define AR7240_MIB_AT_HALF_EN BIT(16)
-#define AR7240_MIB_BUSY BIT(17)
-#define AR7240_MIB_FUNC_S 24
-#define AR7240_MIB_FUNC_M BITM(3)
-#define AR7240_MIB_FUNC_NO_OP 0x0
-#define AR7240_MIB_FUNC_FLUSH 0x1
-#define AR7240_MIB_FUNC_CAPTURE 0x3
-
-#define AR7240_REG_MDIO_CTRL 0x98
-#define AR7240_MDIO_CTRL_DATA_M BITM(16)
-#define AR7240_MDIO_CTRL_REG_ADDR_S 16
-#define AR7240_MDIO_CTRL_PHY_ADDR_S 21
-#define AR7240_MDIO_CTRL_CMD_WRITE 0
-#define AR7240_MDIO_CTRL_CMD_READ BIT(27)
-#define AR7240_MDIO_CTRL_MASTER_EN BIT(30)
-#define AR7240_MDIO_CTRL_BUSY BIT(31)
-
-#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
-
-#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00)
-#define AR7240_PORT_STATUS_SPEED_S 0
-#define AR7240_PORT_STATUS_SPEED_M BITM(2)
-#define AR7240_PORT_STATUS_SPEED_10 0
-#define AR7240_PORT_STATUS_SPEED_100 1
-#define AR7240_PORT_STATUS_SPEED_1000 2
-#define AR7240_PORT_STATUS_TXMAC BIT(2)
-#define AR7240_PORT_STATUS_RXMAC BIT(3)
-#define AR7240_PORT_STATUS_TXFLOW BIT(4)
-#define AR7240_PORT_STATUS_RXFLOW BIT(5)
-#define AR7240_PORT_STATUS_DUPLEX BIT(6)
-#define AR7240_PORT_STATUS_LINK_UP BIT(8)
-#define AR7240_PORT_STATUS_LINK_AUTO BIT(9)
-#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10)
-
-#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04)
-#define AR7240_PORT_CTRL_STATE_M BITM(3)
-#define AR7240_PORT_CTRL_STATE_DISABLED 0
-#define AR7240_PORT_CTRL_STATE_BLOCK 1
-#define AR7240_PORT_CTRL_STATE_LISTEN 2
-#define AR7240_PORT_CTRL_STATE_LEARN 3
-#define AR7240_PORT_CTRL_STATE_FORWARD 4
-#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7)
-#define AR7240_PORT_CTRL_VLAN_MODE_S 8
-#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0
-#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
-#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2
-#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
-#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10)
-#define AR7240_PORT_CTRL_HEADER BIT(11)
-#define AR7240_PORT_CTRL_MAC_LOOP BIT(12)
-#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13)
-#define AR7240_PORT_CTRL_LEARN BIT(14)
-#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15)
-#define AR7240_PORT_CTRL_MIRROR_TX BIT(16)
-#define AR7240_PORT_CTRL_MIRROR_RX BIT(17)
-
-#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08)
-
-#define AR7240_PORT_VLAN_DEFAULT_ID_S 0
-#define AR7240_PORT_VLAN_DEST_PORTS_S 16
-#define AR7240_PORT_VLAN_MODE_S 30
-#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0
-#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1
-#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2
-#define AR7240_PORT_VLAN_MODE_SECURE 3
-
-
-#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100)
-
-#define AR7240_STATS_RXBROAD 0x00
-#define AR7240_STATS_RXPAUSE 0x04
-#define AR7240_STATS_RXMULTI 0x08
-#define AR7240_STATS_RXFCSERR 0x0c
-#define AR7240_STATS_RXALIGNERR 0x10
-#define AR7240_STATS_RXRUNT 0x14
-#define AR7240_STATS_RXFRAGMENT 0x18
-#define AR7240_STATS_RX64BYTE 0x1c
-#define AR7240_STATS_RX128BYTE 0x20
-#define AR7240_STATS_RX256BYTE 0x24
-#define AR7240_STATS_RX512BYTE 0x28
-#define AR7240_STATS_RX1024BYTE 0x2c
-#define AR7240_STATS_RX1518BYTE 0x30
-#define AR7240_STATS_RXMAXBYTE 0x34
-#define AR7240_STATS_RXTOOLONG 0x38
-#define AR7240_STATS_RXGOODBYTE 0x3c
-#define AR7240_STATS_RXBADBYTE 0x44
-#define AR7240_STATS_RXOVERFLOW 0x4c
-#define AR7240_STATS_FILTERED 0x50
-#define AR7240_STATS_TXBROAD 0x54
-#define AR7240_STATS_TXPAUSE 0x58
-#define AR7240_STATS_TXMULTI 0x5c
-#define AR7240_STATS_TXUNDERRUN 0x60
-#define AR7240_STATS_TX64BYTE 0x64
-#define AR7240_STATS_TX128BYTE 0x68
-#define AR7240_STATS_TX256BYTE 0x6c
-#define AR7240_STATS_TX512BYTE 0x70
-#define AR7240_STATS_TX1024BYTE 0x74
-#define AR7240_STATS_TX1518BYTE 0x78
-#define AR7240_STATS_TXMAXBYTE 0x7c
-#define AR7240_STATS_TXOVERSIZE 0x80
-#define AR7240_STATS_TXBYTE 0x84
-#define AR7240_STATS_TXCOLLISION 0x8c
-#define AR7240_STATS_TXABORTCOL 0x90
-#define AR7240_STATS_TXMULTICOL 0x94
-#define AR7240_STATS_TXSINGLECOL 0x98
-#define AR7240_STATS_TXEXCDEFER 0x9c
-#define AR7240_STATS_TXDEFER 0xa0
-#define AR7240_STATS_TXLATECOL 0xa4
-
-#define AR7240_PORT_CPU 0
-#define AR7240_NUM_PORTS 6
-#define AR7240_NUM_PHYS 5
-
-#define AR7240_PHY_ID1 0x004d
-#define AR7240_PHY_ID2 0xd041
-
-#define AR934X_PHY_ID1 0x004d
-#define AR934X_PHY_ID2 0xd042
-
-#define AR7240_MAX_VLANS 16
-
-#define AR934X_REG_OPER_MODE0 0x04
-#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6)
-#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10)
-
-#define AR934X_REG_OPER_MODE1 0x08
-#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28)
-
-#define AR934X_REG_FLOOD_MASK 0x2c
-#define AR934X_FLOOD_MASK_MC_DP(_p) BIT(16 + (_p))
-#define AR934X_FLOOD_MASK_BC_DP(_p) BIT(25 + (_p))
-
-#define AR934X_REG_QM_CTRL 0x3c
-#define AR934X_QM_CTRL_ARP_EN BIT(15)
-
-#define AR934X_REG_AT_CTRL 0x5c
-#define AR934X_AT_CTRL_AGE_TIME BITS(0, 15)
-#define AR934X_AT_CTRL_AGE_EN BIT(17)
-#define AR934X_AT_CTRL_LEARN_CHANGE BIT(18)
-
-#define AR934X_MIB_ENABLE BIT(30)
-
-#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
-
-#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08)
-#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0
-#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12)
-#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13)
-#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14)
-#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15)
-#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16
-#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28)
-#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29
-
-#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c)
-#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16
-#define AR934X_PORT_VLAN2_8021Q_MODE_S 30
-#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0
-#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1
-#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2
-#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3
-
-#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
-
-struct ar7240sw_port_stat {
- unsigned long rx_broadcast;
- unsigned long rx_pause;
- unsigned long rx_multicast;
- unsigned long rx_fcs_error;
- unsigned long rx_align_error;
- unsigned long rx_runt;
- unsigned long rx_fragments;
- unsigned long rx_64byte;
- unsigned long rx_128byte;
- unsigned long rx_256byte;
- unsigned long rx_512byte;
- unsigned long rx_1024byte;
- unsigned long rx_1518byte;
- unsigned long rx_maxbyte;
- unsigned long rx_toolong;
- unsigned long rx_good_byte;
- unsigned long rx_bad_byte;
- unsigned long rx_overflow;
- unsigned long filtered;
-
- unsigned long tx_broadcast;
- unsigned long tx_pause;
- unsigned long tx_multicast;
- unsigned long tx_underrun;
- unsigned long tx_64byte;
- unsigned long tx_128byte;
- unsigned long tx_256byte;
- unsigned long tx_512byte;
- unsigned long tx_1024byte;
- unsigned long tx_1518byte;
- unsigned long tx_maxbyte;
- unsigned long tx_oversize;
- unsigned long tx_byte;
- unsigned long tx_collision;
- unsigned long tx_abortcol;
- unsigned long tx_multicol;
- unsigned long tx_singlecol;
- unsigned long tx_excdefer;
- unsigned long tx_defer;
- unsigned long tx_xlatecol;
-};
-
-struct ar7240sw {
- struct mii_bus *mii_bus;
- struct ag71xx_switch_platform_data *swdata;
- struct switch_dev swdev;
- int num_ports;
- u8 ver;
- bool vlan;
- u16 vlan_id[AR7240_MAX_VLANS];
- u8 vlan_table[AR7240_MAX_VLANS];
- u8 vlan_tagged;
- u16 pvid[AR7240_NUM_PORTS];
- char buf[80];
-
- rwlock_t stats_lock;
- struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
-};
-
-struct ar7240sw_hw_stat {
- char string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int reg;
-};
-
-static DEFINE_MUTEX(reg_mutex);
-
-static inline int sw_is_ar7240(struct ar7240sw *as)
-{
- return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
-}
-
-static inline int sw_is_ar934x(struct ar7240sw *as)
-{
- return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
-}
-
-static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
-{
- return BIT(port);
-}
-
-static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
-{
- return BIT(as->swdev.ports) - 1;
-}
-
-static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
-{
- return ar7240sw_port_mask_all(as) & ~BIT(port);
-}
-
-static inline u16 mk_phy_addr(u32 reg)
-{
- return 0x17 & ((reg >> 4) | 0x10);
-}
-
-static inline u16 mk_phy_reg(u32 reg)
-{
- return (reg << 1) & 0x1e;
-}
-
-static inline u16 mk_high_addr(u32 reg)
-{
- return (reg >> 7) & 0x1ff;
-}
-
-static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
-{
- unsigned long flags;
- u16 phy_addr;
- u16 phy_reg;
- u32 hi, lo;
-
- reg = (reg & 0xfffffffc) >> 2;
- phy_addr = mk_phy_addr(reg);
- phy_reg = mk_phy_reg(reg);
-
- local_irq_save(flags);
- ag71xx_mdio_mii_write(mii, 0x1f, 0x10, mk_high_addr(reg));
- lo = (u32) ag71xx_mdio_mii_read(mii, phy_addr, phy_reg);
- hi = (u32) ag71xx_mdio_mii_read(mii, phy_addr, phy_reg + 1);
- local_irq_restore(flags);
-
- return (hi << 16) | lo;
-}
-
-static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
-{
- unsigned long flags;
- u16 phy_addr;
- u16 phy_reg;
-
- reg = (reg & 0xfffffffc) >> 2;
- phy_addr = mk_phy_addr(reg);
- phy_reg = mk_phy_reg(reg);
-
- local_irq_save(flags);
- ag71xx_mdio_mii_write(mii, 0x1f, 0x10, mk_high_addr(reg));
- ag71xx_mdio_mii_write(mii, phy_addr, phy_reg + 1, (val >> 16));
- ag71xx_mdio_mii_write(mii, phy_addr, phy_reg, (val & 0xffff));
- local_irq_restore(flags);
-}
-
-static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
-{
- u32 ret;
-
- mutex_lock(®_mutex);
- ret = __ar7240sw_reg_read(mii, reg_addr);
- mutex_unlock(®_mutex);
-
- return ret;
-}
-
-static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
-{
- mutex_lock(®_mutex);
- __ar7240sw_reg_write(mii, reg_addr, reg_val);
- mutex_unlock(®_mutex);
-}
-
-static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
-{
- u32 t;
-
- mutex_lock(®_mutex);
- t = __ar7240sw_reg_read(mii, reg);
- t &= ~mask;
- t |= val;
- __ar7240sw_reg_write(mii, reg, t);
- mutex_unlock(®_mutex);
-
- return t;
-}
-
-static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
-{
- u32 t;
-
- mutex_lock(®_mutex);
- t = __ar7240sw_reg_read(mii, reg);
- t |= val;
- __ar7240sw_reg_write(mii, reg, t);
- mutex_unlock(®_mutex);
-}
-
-static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int i;
-
- for (i = 0; i < timeout; i++) {
- u32 t;
-
- t = __ar7240sw_reg_read(mii, reg);
- if ((t & mask) == val)
- return 0;
-
- usleep_range(1000, 2000);
- }
-
- return -ETIMEDOUT;
-}
-
-static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int ret;
-
- mutex_lock(®_mutex);
- ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
- mutex_unlock(®_mutex);
- return ret;
-}
-
-int ar7240sw_phy_read(struct mii_bus *mii, int phy_addr, int reg_addr)
-{
- u32 t, val = 0xffff;
- int err;
-
- if (phy_addr >= AR7240_NUM_PHYS)
- return 0xffff;
-
- mutex_lock(®_mutex);
- t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
- (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
- AR7240_MDIO_CTRL_MASTER_EN |
- AR7240_MDIO_CTRL_BUSY |
- AR7240_MDIO_CTRL_CMD_READ;
-
- __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
- err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
- AR7240_MDIO_CTRL_BUSY, 0, 5);
- if (!err)
- val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
- mutex_unlock(®_mutex);
-
- return val & AR7240_MDIO_CTRL_DATA_M;
-}
-
-int ar7240sw_phy_write(struct mii_bus *mii, int phy_addr, int reg_addr,
- u16 reg_val)
-{
- u32 t;
- int ret;
-
- if (phy_addr >= AR7240_NUM_PHYS)
- return -EINVAL;
-
- mutex_lock(®_mutex);
- t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
- (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
- AR7240_MDIO_CTRL_MASTER_EN |
- AR7240_MDIO_CTRL_BUSY |
- AR7240_MDIO_CTRL_CMD_WRITE |
- reg_val;
-
- __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
- ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
- AR7240_MDIO_CTRL_BUSY, 0, 5);
- mutex_unlock(®_mutex);
-
- return ret;
-}
-
-static int ar7240sw_capture_stats(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
- int port;
- int ret;
-
- write_lock(&as->stats_lock);
-
- /* Capture the hardware statistics for all ports */
- ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0,
- (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S),
- (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
-
- /* Wait for the capturing to complete. */
- ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
- AR7240_MIB_BUSY, 0, 10);
-
- if (ret)
- goto unlock;
-
- for (port = 0; port < AR7240_NUM_PORTS; port++) {
- unsigned int base;
- struct ar7240sw_port_stat *stats;
-
- base = AR7240_REG_STATS_BASE(port);
- stats = &as->port_stats[port];
-
-#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
-
- stats->rx_good_byte += READ_STAT(RXGOODBYTE);
- stats->tx_byte += READ_STAT(TXBYTE);
-
-#undef READ_STAT
- }
-
- ret = 0;
-
-unlock:
- write_unlock(&as->stats_lock);
- return ret;
-}
-
-static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
-{
- ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_STATE_DISABLED);
-}
-
-static void ar7240sw_setup(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
-
- /* Enable CPU port, and disable mirror port */
- ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
- AR7240_CPU_PORT_EN |
- (15 << AR7240_MIRROR_PORT_S));
-
- /* Setup TAG priority mapping */
- ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
-
- if (sw_is_ar934x(as)) {
- /* Enable aging, MAC replacing */
- ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL,
- 0x2b /* 5 min age time */ |
- AR934X_AT_CTRL_AGE_EN |
- AR934X_AT_CTRL_LEARN_CHANGE);
- /* Enable ARP frame acknowledge */
- ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL,
- AR934X_QM_CTRL_ARP_EN);
- /* Enable Broadcast/Multicast frames transmitted to the CPU */
- ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK,
- AR934X_FLOOD_MASK_BC_DP(0) |
- AR934X_FLOOD_MASK_MC_DP(0));
-
- /* setup MTU */
- ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
- AR9340_GLOBAL_CTRL_MTU_M,
- AR9340_GLOBAL_CTRL_MTU_M);
-
- /* Enable MIB counters */
- ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0,
- AR934X_MIB_ENABLE);
-
- } else {
- /* Enable ARP frame acknowledge, aging, MAC replacing */
- ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
- AR7240_AT_CTRL_RESERVED |
- 0x2b /* 5 min age time */ |
- AR7240_AT_CTRL_AGE_EN |
- AR7240_AT_CTRL_ARP_EN |
- AR7240_AT_CTRL_LEARN_CHANGE);
- /* Enable Broadcast frames transmitted to the CPU */
- ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
- AR7240_FLOOD_MASK_BROAD_TO_CPU);
-
- /* setup MTU */
- ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
- AR7240_GLOBAL_CTRL_MTU_M,
- AR7240_GLOBAL_CTRL_MTU_M);
- }
-
- /* setup Service TAG */
- ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
-}
-
-/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */
-static int
-ar7240sw_phy_poll_reset(struct mii_bus *bus)
-{
- const unsigned int sleep_msecs = 20;
- int ret, elapsed, i;
-
- for (elapsed = sleep_msecs; elapsed <= 600;
- elapsed += sleep_msecs) {
- msleep(sleep_msecs);
- for (i = 0; i < AR7240_NUM_PHYS; i++) {
- ret = ar7240sw_phy_read(bus, i, MII_BMCR);
- if (ret < 0)
- return ret;
- if (ret & BMCR_RESET)
- break;
- if (i == AR7240_NUM_PHYS - 1) {
- usleep_range(1000, 2000);
- return 0;
- }
- }
- }
- return -ETIMEDOUT;
-}
-
-static int ar7240sw_reset(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
- int ret;
- int i;
-
- /* Set all ports to disabled state. */
- for (i = 0; i < AR7240_NUM_PORTS; i++)
- ar7240sw_disable_port(as, i);
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 3000);
-
- /* Reset the switch. */
- ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
- AR7240_MASK_CTRL_SOFT_RESET);
-
- ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
- AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
-
- /* setup PHYs */
- for (i = 0; i < AR7240_NUM_PHYS; i++) {
- ar7240sw_phy_write(mii, i, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
- ADVERTISE_PAUSE_ASYM);
- ar7240sw_phy_write(mii, i, MII_BMCR,
- BMCR_RESET | BMCR_ANENABLE);
- }
- ret = ar7240sw_phy_poll_reset(mii);
- if (ret)
- return ret;
-
- ar7240sw_setup(as);
- return ret;
-}
-
-static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
-{
- struct mii_bus *mii = as->mii_bus;
- u32 ctrl;
- u32 vid, mode;
-
- ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
- AR7240_PORT_CTRL_SINGLE_VLAN;
-
- if (port == AR7240_PORT_CPU) {
- ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
- AR7240_PORT_STATUS_SPEED_1000 |
- AR7240_PORT_STATUS_TXFLOW |
- AR7240_PORT_STATUS_RXFLOW |
- AR7240_PORT_STATUS_TXMAC |
- AR7240_PORT_STATUS_RXMAC |
- AR7240_PORT_STATUS_DUPLEX);
- } else {
- ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
- AR7240_PORT_STATUS_LINK_AUTO);
- }
-
- /* Set the default VID for this port */
- if (as->vlan) {
- vid = as->vlan_id[as->pvid[port]];
- mode = AR7240_PORT_VLAN_MODE_SECURE;
- } else {
- vid = port;
- mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
- }
-
- if (as->vlan) {
- if (as->vlan_tagged & BIT(port))
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- else
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- } else {
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- }
-
- if (!portmask) {
- if (port == AR7240_PORT_CPU)
- portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
- else
- portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
- }
-
- /* allow the port to talk to all other ports, but exclude its
- * own ID to prevent frames from being reflected back to the
- * port that they came from */
- portmask &= ar7240sw_port_mask_but(as, port);
-
- ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
- if (sw_is_ar934x(as)) {
- u32 vlan1, vlan2;
-
- vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
- vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
- (mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
- ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
- ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
- } else {
- u32 vlan;
-
- vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
- (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
-
- ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
- }
-}
-
-static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
-{
- struct mii_bus *mii = as->mii_bus;
- u32 t;
-
- t = (addr[4] << 8) | addr[5];
- ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
-
- t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
- ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
-
- return 0;
-}
-
-static int
-ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- as->vlan_id[val->port_vlan] = val->value.i;
- return 0;
-}
-
-static int
-ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- val->value.i = as->vlan_id[val->port_vlan];
- return 0;
-}
-
-static int
-ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
-
- /* make sure no invalid PVIDs get set */
-
- if (vlan >= dev->vlans)
- return -EINVAL;
-
- as->pvid[port] = vlan;
- return 0;
-}
-
-static int
-ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- *vlan = as->pvid[port];
- return 0;
-}
-
-static int
-ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 ports = as->vlan_table[val->port_vlan];
- int i;
-
- val->len = 0;
- for (i = 0; i < as->swdev.ports; i++) {
- struct switch_port *p;
-
- if (!(ports & (1 << i)))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
- if (as->vlan_tagged & (1 << i))
- p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
- else
- p->flags = 0;
- }
- return 0;
-}
-
-static int
-ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 *vt = &as->vlan_table[val->port_vlan];
- int i, j;
-
- *vt = 0;
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
-
- if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
- as->vlan_tagged |= (1 << p->id);
- else {
- as->vlan_tagged &= ~(1 << p->id);
- as->pvid[p->id] = val->port_vlan;
-
- /* make sure that an untagged port does not
- * appear in other vlans */
- for (j = 0; j < AR7240_MAX_VLANS; j++) {
- if (j == val->port_vlan)
- continue;
- as->vlan_table[j] &= ~(1 << p->id);
- }
- }
-
- *vt |= 1 << p->id;
- }
- return 0;
-}
-
-static int
-ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- as->vlan = !!val->value.i;
- return 0;
-}
-
-static int
-ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- val->value.i = as->vlan;
- return 0;
-}
-
-static void
-ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
-{
- struct mii_bus *mii = as->mii_bus;
-
- if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
- return;
-
- if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
- val &= AR7240_VTUDATA_MEMBER;
- val |= AR7240_VTUDATA_VALID;
- ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
- }
- op |= AR7240_VTU_ACTIVE;
- ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
-}
-
-static int
-ar7240_hw_apply(struct switch_dev *dev)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 portmask[AR7240_NUM_PORTS];
- int i, j;
-
- /* flush all vlan translation unit entries */
- ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
-
- memset(portmask, 0, sizeof(portmask));
- if (as->vlan) {
- /* calculate the port destination masks and load vlans
- * into the vlan translation unit */
- for (j = 0; j < AR7240_MAX_VLANS; j++) {
- u8 vp = as->vlan_table[j];
-
- if (!vp)
- continue;
-
- for (i = 0; i < as->swdev.ports; i++) {
- u8 mask = (1 << i);
- if (vp & mask)
- portmask[i] |= vp & ~mask;
- }
-
- ar7240_vtu_op(as,
- AR7240_VTU_OP_LOAD |
- (as->vlan_id[j] << AR7240_VTU_VID_S),
- as->vlan_table[j]);
- }
- } else {
- /* vlan disabled:
- * isolate all ports, but connect them to the cpu port */
- for (i = 0; i < as->swdev.ports; i++) {
- if (i == AR7240_PORT_CPU)
- continue;
-
- portmask[i] = 1 << AR7240_PORT_CPU;
- portmask[AR7240_PORT_CPU] |= (1 << i);
- }
- }
-
- /* update the port destination mask registers and tag settings */
- for (i = 0; i < as->swdev.ports; i++)
- ar7240sw_setup_port(as, i, portmask[i]);
-
- return 0;
-}
-
-static int
-ar7240_reset_switch(struct switch_dev *dev)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- ar7240sw_reset(as);
- return 0;
-}
-
-static int
-ar7240_get_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
- u32 status;
-
- if (port >= AR7240_NUM_PORTS)
- return -EINVAL;
-
- status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
- link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
- if (link->aneg) {
- link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
- if (!link->link)
- return 0;
- } else {
- link->link = true;
- }
-
- link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
- link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
- link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
- switch (status & AR7240_PORT_STATUS_SPEED_M) {
- case AR7240_PORT_STATUS_SPEED_10:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case AR7240_PORT_STATUS_SPEED_100:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case AR7240_PORT_STATUS_SPEED_1000:
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- }
-
- return 0;
-}
-
-static int
-ar7240_get_port_stats(struct switch_dev *dev, int port,
- struct switch_port_stats *stats)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
-
- if (port >= AR7240_NUM_PORTS)
- return -EINVAL;
-
- ar7240sw_capture_stats(as);
-
- read_lock(&as->stats_lock);
- stats->rx_bytes = as->port_stats[port].rx_good_byte;
- stats->tx_bytes = as->port_stats[port].tx_byte;
- read_unlock(&as->stats_lock);
-
- return 0;
-}
-
-static int
-ar7240_set_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- int port = val->value.i;
-
- if (port > 15)
- return -EINVAL;
-
- ar7240sw_reg_rmw(mii, AR7240_REG_CPU_PORT,
- AR7240_MIRROR_PORT_M << AR7240_MIRROR_PORT_S,
- port << AR7240_MIRROR_PORT_S);
-
- return 0;
-}
-
-static int
-ar7240_get_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- u32 ret;
-
- ret = ar7240sw_reg_read(mii, AR7240_REG_CPU_PORT);
- val->value.i = (ret >> AR7240_MIRROR_PORT_S) & AR7240_MIRROR_PORT_M;
-
- return 0;
-}
-
-static int
-ar7240_set_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- if (val && val->value.i == 1)
- ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_RX);
- else
- ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_RX, 0);
-
- return 0;
-}
-
-static int
-ar7240_get_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- u32 ctrl;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port));
-
- if ((ctrl & AR7240_PORT_CTRL_MIRROR_RX) == AR7240_PORT_CTRL_MIRROR_RX)
- val->value.i = 1;
- else
- val->value.i = 0;
-
- return 0;
-}
-
-static int
-ar7240_set_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- if (val && val->value.i == 1)
- ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_TX);
- else
- ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_TX, 0);
-
- return 0;
-}
-
-static int
-ar7240_get_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- u32 ctrl;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port));
-
- if ((ctrl & AR7240_PORT_CTRL_MIRROR_TX) == AR7240_PORT_CTRL_MIRROR_TX)
- val->value.i = 1;
- else
- val->value.i = 0;
-
- return 0;
-}
-
-static struct switch_attr ar7240_globals[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "Enable VLAN mode",
- .set = ar7240_set_vlan,
- .get = ar7240_get_vlan,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "mirror_monitor_port",
- .description = "Mirror monitor port",
- .set = ar7240_set_mirror_monitor_port,
- .get = ar7240_get_mirror_monitor_port,
- .max = 15
- },
-};
-
-static struct switch_attr ar7240_port[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_rx",
- .description = "Enable mirroring of RX packets",
- .set = ar7240_set_mirror_rx,
- .get = ar7240_get_mirror_rx,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_tx",
- .description = "Enable mirroring of TX packets",
- .set = ar7240_set_mirror_tx,
- .get = ar7240_get_mirror_tx,
- .max = 1
- },
-};
-
-static struct switch_attr ar7240_vlan[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "vid",
- .description = "VLAN ID",
- .set = ar7240_set_vid,
- .get = ar7240_get_vid,
- .max = 4094,
- },
-};
-
-static const struct switch_dev_ops ar7240_ops = {
- .attr_global = {
- .attr = ar7240_globals,
- .n_attr = ARRAY_SIZE(ar7240_globals),
- },
- .attr_port = {
- .attr = ar7240_port,
- .n_attr = ARRAY_SIZE(ar7240_port),
- },
- .attr_vlan = {
- .attr = ar7240_vlan,
- .n_attr = ARRAY_SIZE(ar7240_vlan),
- },
- .get_port_pvid = ar7240_get_pvid,
- .set_port_pvid = ar7240_set_pvid,
- .get_vlan_ports = ar7240_get_ports,
- .set_vlan_ports = ar7240_set_ports,
- .apply_config = ar7240_hw_apply,
- .reset_switch = ar7240_reset_switch,
- .get_port_link = ar7240_get_port_link,
- .get_port_stats = ar7240_get_port_stats,
-};
-
-static struct ar7240sw *
-ar7240_probe(struct ag71xx *ag, struct device_node *np)
-{
- struct mii_bus *mii = ag->mii_bus;
- struct ar7240sw *as;
- struct switch_dev *swdev;
- u32 ctrl;
- u16 phy_id1;
- u16 phy_id2;
- int i;
-
- phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
- phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
- if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
- (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
- pr_err("%s: unknown phy id '%04x:%04x'\n",
- dev_name(&mii->dev), phy_id1, phy_id2);
- return NULL;
- }
-
- as = kzalloc(sizeof(*as), GFP_KERNEL);
- if (!as)
- return NULL;
-
- as->mii_bus = mii;
-
- swdev = &as->swdev;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
- as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
- AR7240_MASK_CTRL_VERSION_M;
-
- if (sw_is_ar7240(as)) {
- swdev->name = "AR7240/AR9330 built-in switch";
- swdev->ports = AR7240_NUM_PORTS - 1;
- } else if (sw_is_ar934x(as)) {
- swdev->name = "AR934X built-in switch";
-
- if (ag->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
- AR934X_OPER_MODE0_MAC_GMII_EN);
- } else if (ag->phy_if_mode == PHY_INTERFACE_MODE_MII) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
- AR934X_OPER_MODE0_PHY_MII_EN);
- } else {
- pr_err("%s: invalid PHY interface mode\n",
- dev_name(&mii->dev));
- goto err_free;
- }
-
- if (of_property_read_bool(np, "phy4-mii-enable")) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
- AR934X_REG_OPER_MODE1_PHY4_MII_EN);
- swdev->ports = AR7240_NUM_PORTS - 1;
- } else {
- swdev->ports = AR7240_NUM_PORTS;
- }
- } else {
- pr_err("%s: unsupported chip, ctrl=%08x\n",
- dev_name(&mii->dev), ctrl);
- goto err_free;
- }
-
- swdev->cpu_port = AR7240_PORT_CPU;
- swdev->vlans = AR7240_MAX_VLANS;
- swdev->ops = &ar7240_ops;
-
- if (register_switch(&as->swdev, ag->dev) < 0)
- goto err_free;
-
- pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name);
-
- /* initialize defaults */
- for (i = 0; i < AR7240_MAX_VLANS; i++)
- as->vlan_id[i] = i;
-
- as->vlan_table[0] = ar7240sw_port_mask_all(as);
-
- return as;
-
-err_free:
- kfree(as);
- return NULL;
-}
-
-void ag71xx_ar7240_start(struct ag71xx *ag)
-{
- struct ar7240sw *as = ag->phy_priv;
-
- if (!as)
- return;
-
- ar7240sw_reset(as);
-
- ar7240_set_addr(as, ag->dev->dev_addr);
- ar7240_hw_apply(&as->swdev);
-}
-
-int ag71xx_ar7240_init(struct ag71xx *ag, struct device_node *np)
-{
- struct ar7240sw *as;
-
- as = ar7240_probe(ag, np);
- if (!as)
- return -ENODEV;
-
- ag->phy_priv = as;
- ar7240sw_reset(as);
-
- rwlock_init(&as->stats_lock);
-
- return 0;
-}
-
-void ag71xx_ar7240_cleanup(struct ag71xx *ag)
-{
- struct ar7240sw *as = ag->phy_priv;
-
- if (!as)
- return;
-
- unregister_switch(&as->swdev);
- kfree(as);
- ag->phy_priv = NULL;
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/debugfs.h>
-
-#include "ag71xx.h"
-
-static struct dentry *ag71xx_debugfs_root;
-
-static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
-{
- if (status)
- ag->debug.int_stats.total++;
- if (status & AG71XX_INT_TX_PS)
- ag->debug.int_stats.tx_ps++;
- if (status & AG71XX_INT_TX_UR)
- ag->debug.int_stats.tx_ur++;
- if (status & AG71XX_INT_TX_BE)
- ag->debug.int_stats.tx_be++;
- if (status & AG71XX_INT_RX_PR)
- ag->debug.int_stats.rx_pr++;
- if (status & AG71XX_INT_RX_OF)
- ag->debug.int_stats.rx_of++;
- if (status & AG71XX_INT_RX_BE)
- ag->debug.int_stats.rx_be++;
-}
-
-static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
-#define PR_INT_STAT(_label, _field) \
- len += snprintf(buf + len, sizeof(buf) - len, \
- "%20s: %10lu\n", _label, ag->debug.int_stats._field);
-
- struct ag71xx *ag = file->private_data;
- char buf[256];
- unsigned int len = 0;
-
- PR_INT_STAT("TX Packet Sent", tx_ps);
- PR_INT_STAT("TX Underrun", tx_ur);
- PR_INT_STAT("TX Bus Error", tx_be);
- PR_INT_STAT("RX Packet Received", rx_pr);
- PR_INT_STAT("RX Overflow", rx_of);
- PR_INT_STAT("RX Bus Error", rx_be);
- len += snprintf(buf + len, sizeof(buf) - len, "\n");
- PR_INT_STAT("Total", total);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-#undef PR_INT_STAT
-}
-
-static const struct file_operations ag71xx_fops_int_stats = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_int_stats,
- .owner = THIS_MODULE
-};
-
-void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
-{
- struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
-
- if (rx) {
- stats->rx_count++;
- stats->rx_packets += rx;
- if (rx <= AG71XX_NAPI_WEIGHT)
- stats->rx[rx]++;
- if (rx > stats->rx_packets_max)
- stats->rx_packets_max = rx;
- }
-
- if (tx) {
- stats->tx_count++;
- stats->tx_packets += tx;
- if (tx <= AG71XX_NAPI_WEIGHT)
- stats->tx[tx]++;
- if (tx > stats->tx_packets_max)
- stats->tx_packets_max = tx;
- }
-}
-
-static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
- struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
- char *buf;
- unsigned int buflen;
- unsigned int len = 0;
- unsigned long rx_avg = 0;
- unsigned long tx_avg = 0;
- int ret;
- int i;
-
- buflen = 2048;
- buf = kmalloc(buflen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (stats->rx_count)
- rx_avg = stats->rx_packets / stats->rx_count;
-
- if (stats->tx_count)
- tx_avg = stats->tx_packets / stats->tx_count;
-
- len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n",
- "len", "rx", "tx");
-
- for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
- len += snprintf(buf + len, buflen - len,
- "%3d: %10lu %10lu\n",
- i, stats->rx[i], stats->tx[i]);
-
- len += snprintf(buf + len, buflen - len, "\n");
-
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "sum", stats->rx_count, stats->tx_count);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "avg", rx_avg, tx_avg);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "max", stats->rx_packets_max, stats->tx_packets_max);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "pkt", stats->rx_packets, stats->tx_packets);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
- kfree(buf);
-
- return ret;
-}
-
-static const struct file_operations ag71xx_fops_napi_stats = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_napi_stats,
- .owner = THIS_MODULE
-};
-
-#define DESC_PRINT_LEN 64
-
-static ssize_t read_file_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos,
- struct ag71xx *ag,
- struct ag71xx_ring *ring,
- unsigned desc_reg)
-{
- int ring_size = BIT(ring->order);
- int ring_mask = ring_size - 1;
- char *buf;
- unsigned int buflen;
- unsigned int len = 0;
- unsigned long flags;
- ssize_t ret;
- int curr;
- int dirty;
- u32 desc_hw;
- int i;
-
- buflen = (ring_size * DESC_PRINT_LEN);
- buf = kmalloc(buflen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- len += snprintf(buf + len, buflen - len,
- "Idx ... %-8s %-8s %-8s %-8s .\n",
- "desc", "next", "data", "ctrl");
-
- spin_lock_irqsave(&ag->lock, flags);
-
- curr = (ring->curr & ring_mask);
- dirty = (ring->dirty & ring_mask);
- desc_hw = ag71xx_rr(ag, desc_reg);
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
- u32 desc_dma = ((u32) ring->descs_dma) + i * AG71XX_DESC_SIZE;
-
- len += snprintf(buf + len, buflen - len,
- "%3d %c%c%c %08x %08x %08x %08x %c\n",
- i,
- (i == curr) ? 'C' : ' ',
- (i == dirty) ? 'D' : ' ',
- (desc_hw == desc_dma) ? 'H' : ' ',
- desc_dma,
- desc->next,
- desc->data,
- desc->ctrl,
- (desc->ctrl & DESC_EMPTY) ? 'E' : '*');
- }
-
- spin_unlock_irqrestore(&ag->lock, flags);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
- kfree(buf);
-
- return ret;
-}
-
-static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
-
- return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
- AG71XX_REG_TX_DESC);
-}
-
-static const struct file_operations ag71xx_fops_tx_ring = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_tx_ring,
- .owner = THIS_MODULE
-};
-
-static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
-
- return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
- AG71XX_REG_RX_DESC);
-}
-
-static const struct file_operations ag71xx_fops_rx_ring = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_rx_ring,
- .owner = THIS_MODULE
-};
-
-void ag71xx_debugfs_exit(struct ag71xx *ag)
-{
- debugfs_remove_recursive(ag->debug.debugfs_dir);
-}
-
-int ag71xx_debugfs_init(struct ag71xx *ag)
-{
- struct device *dev = &ag->pdev->dev;
-
- ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev),
- ag71xx_debugfs_root);
- if (!ag->debug.debugfs_dir) {
- dev_err(dev, "unable to create debugfs directory\n");
- return -ENOENT;
- }
-
- debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_int_stats);
- debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_napi_stats);
- debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_tx_ring);
- debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_rx_ring);
-
- return 0;
-}
-
-int ag71xx_debugfs_root_init(void)
-{
- if (ag71xx_debugfs_root)
- return -EBUSY;
-
- ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
- if (!ag71xx_debugfs_root)
- return -ENOENT;
-
- return 0;
-}
-
-void ag71xx_debugfs_root_exit(void)
-{
- debugfs_remove(ag71xx_debugfs_root);
- ag71xx_debugfs_root = NULL;
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-static int ag71xx_ethtool_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
-
- if (!phydev)
- return -ENODEV;
-
- return phy_ethtool_ioctl(phydev, cmd);
-}
-
-static int ag71xx_ethtool_set_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
-
- if (!phydev)
- return -ENODEV;
-
- return phy_ethtool_ioctl(phydev, cmd);
-}
-
-static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- return ag->msg_enable;
-}
-
-static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- ag->msg_enable = msg_level;
-}
-
-static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
- struct ethtool_ringparam *er)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
- er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
- er->rx_mini_max_pending = 0;
- er->rx_jumbo_max_pending = 0;
-
- er->tx_pending = BIT(ag->tx_ring.order);
- er->rx_pending = BIT(ag->rx_ring.order);
- er->rx_mini_pending = 0;
- er->rx_jumbo_pending = 0;
-
- if (ag->tx_ring.desc_split)
- er->tx_pending /= AG71XX_TX_RING_DS_PER_PKT;
-}
-
-static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
- struct ethtool_ringparam *er)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned tx_size;
- unsigned rx_size;
- int err = 0;
-
- if (er->rx_mini_pending != 0||
- er->rx_jumbo_pending != 0 ||
- er->rx_pending == 0 ||
- er->tx_pending == 0)
- return -EINVAL;
-
- tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
- er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
-
- rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
- er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
-
- if (netif_running(dev)) {
- err = dev->netdev_ops->ndo_stop(dev);
- if (err)
- return err;
- }
-
- if (ag->tx_ring.desc_split)
- tx_size *= AG71XX_TX_RING_DS_PER_PKT;
-
- ag->tx_ring.order = ag71xx_ring_size_order(tx_size);
- ag->rx_ring.order = ag71xx_ring_size_order(rx_size);
-
- if (netif_running(dev))
- err = dev->netdev_ops->ndo_open(dev);
-
- return err;
-}
-
-struct ethtool_ops ag71xx_ethtool_ops = {
- .set_settings = ag71xx_ethtool_set_settings,
- .get_settings = ag71xx_ethtool_get_settings,
- .get_msglevel = ag71xx_ethtool_get_msglevel,
- .set_msglevel = ag71xx_ethtool_set_msglevel,
- .get_ringparam = ag71xx_ethtool_get_ringparam,
- .set_ringparam = ag71xx_ethtool_set_ringparam,
- .get_link = ethtool_op_get_link,
- .get_ts_info = ethtool_op_get_ts_info,
-};
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/sizes.h>
-#include <linux/of_net.h>
-#include <linux/of_address.h>
-#include "ag71xx.h"
-
-#define AG71XX_DEFAULT_MSG_ENABLE \
- (NETIF_MSG_DRV \
- | NETIF_MSG_PROBE \
- | NETIF_MSG_LINK \
- | NETIF_MSG_TIMER \
- | NETIF_MSG_IFDOWN \
- | NETIF_MSG_IFUP \
- | NETIF_MSG_RX_ERR \
- | NETIF_MSG_TX_ERR)
-
-static int ag71xx_msg_level = -1;
-
-module_param_named(msg_level, ag71xx_msg_level, int, 0);
-MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
-
-#define ETH_SWITCH_HEADER_LEN 2
-
-static int ag71xx_tx_packets(struct ag71xx *ag, bool flush);
-
-static inline unsigned int ag71xx_max_frame_len(unsigned int mtu)
-{
- return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN;
-}
-
-static void ag71xx_dump_dma_regs(struct ag71xx *ag)
-{
- DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
- ag71xx_rr(ag, AG71XX_REG_TX_DESC),
- ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
-
- DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
- ag71xx_rr(ag, AG71XX_REG_RX_DESC),
- ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
-}
-
-static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
-{
- DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
- ag->dev->name, label, intr,
- (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
- (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
- (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
- (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
- (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
- (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
-}
-
-static void ag71xx_ring_tx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct net_device *dev = ag->dev;
- int ring_mask = BIT(ring->order) - 1;
- u32 bytes_compl = 0, pkts_compl = 0;
-
- while (ring->curr != ring->dirty) {
- struct ag71xx_desc *desc;
- u32 i = ring->dirty & ring_mask;
-
- desc = ag71xx_ring_desc(ring, i);
- if (!ag71xx_desc_empty(desc)) {
- desc->ctrl = 0;
- dev->stats.tx_errors++;
- }
-
- if (ring->buf[i].skb) {
- bytes_compl += ring->buf[i].len;
- pkts_compl++;
- dev_kfree_skb_any(ring->buf[i].skb);
- }
- ring->buf[i].skb = NULL;
- ring->dirty++;
- }
-
- /* flush descriptors */
- wmb();
-
- netdev_completed_queue(dev, pkts_compl, bytes_compl);
-}
-
-static void ag71xx_ring_tx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- int ring_size = BIT(ring->order);
- int ring_mask = ring_size - 1;
- int i;
-
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
-
- desc->next = (u32) (ring->descs_dma +
- AG71XX_DESC_SIZE * ((i + 1) & ring_mask));
-
- desc->ctrl = DESC_EMPTY;
- ring->buf[i].skb = NULL;
- }
-
- /* flush descriptors */
- wmb();
-
- ring->curr = 0;
- ring->dirty = 0;
- netdev_reset_queue(ag->dev);
-}
-
-static void ag71xx_ring_rx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int ring_size = BIT(ring->order);
- int i;
-
- if (!ring->buf)
- return;
-
- for (i = 0; i < ring_size; i++)
- if (ring->buf[i].rx_buf) {
- dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
- ag->rx_buf_size, DMA_FROM_DEVICE);
- skb_free_frag(ring->buf[i].rx_buf);
- }
-}
-
-static int ag71xx_buffer_size(struct ag71xx *ag)
-{
- return ag->rx_buf_size +
- SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-}
-
-static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf,
- int offset,
- void *(*alloc)(unsigned int size))
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, buf - &ring->buf[0]);
- void *data;
-
- data = alloc(ag71xx_buffer_size(ag));
- if (!data)
- return false;
-
- buf->rx_buf = data;
- buf->dma_addr = dma_map_single(&ag->dev->dev, data, ag->rx_buf_size,
- DMA_FROM_DEVICE);
- desc->data = (u32) buf->dma_addr + offset;
- return true;
-}
-
-static int ag71xx_ring_rx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int ring_size = BIT(ring->order);
- int ring_mask = BIT(ring->order) - 1;
- unsigned int i;
- int ret;
-
- ret = 0;
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
-
- desc->next = (u32) (ring->descs_dma +
- AG71XX_DESC_SIZE * ((i + 1) & ring_mask));
-
- DBG("ag71xx: RX desc at %p, next is %08x\n",
- desc, desc->next);
- }
-
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
-
- if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], ag->rx_buf_offset,
- netdev_alloc_frag)) {
- ret = -ENOMEM;
- break;
- }
-
- desc->ctrl = DESC_EMPTY;
- }
-
- /* flush descriptors */
- wmb();
-
- ring->curr = 0;
- ring->dirty = 0;
-
- return ret;
-}
-
-static int ag71xx_ring_rx_refill(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int ring_mask = BIT(ring->order) - 1;
- unsigned int count;
- int offset = ag->rx_buf_offset;
-
- count = 0;
- for (; ring->curr - ring->dirty > 0; ring->dirty++) {
- struct ag71xx_desc *desc;
- unsigned int i;
-
- i = ring->dirty & ring_mask;
- desc = ag71xx_ring_desc(ring, i);
-
- if (!ring->buf[i].rx_buf &&
- !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset,
- napi_alloc_frag))
- break;
-
- desc->ctrl = DESC_EMPTY;
- count++;
- }
-
- /* flush descriptors */
- wmb();
-
- DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
-
- return count;
-}
-
-static int ag71xx_rings_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *tx = &ag->tx_ring;
- struct ag71xx_ring *rx = &ag->rx_ring;
- int ring_size = BIT(tx->order) + BIT(rx->order);
- int tx_size = BIT(tx->order);
-
- tx->buf = kzalloc(ring_size * sizeof(*tx->buf), GFP_KERNEL);
- if (!tx->buf)
- return -ENOMEM;
-
- tx->descs_cpu = dma_alloc_coherent(NULL, ring_size * AG71XX_DESC_SIZE,
- &tx->descs_dma, GFP_ATOMIC);
- if (!tx->descs_cpu) {
- kfree(tx->buf);
- tx->buf = NULL;
- return -ENOMEM;
- }
-
- rx->buf = &tx->buf[BIT(tx->order)];
- rx->descs_cpu = ((void *)tx->descs_cpu) + tx_size * AG71XX_DESC_SIZE;
- rx->descs_dma = tx->descs_dma + tx_size * AG71XX_DESC_SIZE;
-
- ag71xx_ring_tx_init(ag);
- return ag71xx_ring_rx_init(ag);
-}
-
-static void ag71xx_rings_free(struct ag71xx *ag)
-{
- struct ag71xx_ring *tx = &ag->tx_ring;
- struct ag71xx_ring *rx = &ag->rx_ring;
- int ring_size = BIT(tx->order) + BIT(rx->order);
-
- if (tx->descs_cpu)
- dma_free_coherent(NULL, ring_size * AG71XX_DESC_SIZE,
- tx->descs_cpu, tx->descs_dma);
-
- kfree(tx->buf);
-
- tx->descs_cpu = NULL;
- rx->descs_cpu = NULL;
- tx->buf = NULL;
- rx->buf = NULL;
-}
-
-static void ag71xx_rings_cleanup(struct ag71xx *ag)
-{
- ag71xx_ring_rx_clean(ag);
- ag71xx_ring_tx_clean(ag);
- ag71xx_rings_free(ag);
-
- netdev_reset_queue(ag->dev);
-}
-
-static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
-{
- switch (ag->speed) {
- case SPEED_1000:
- return "1000";
- case SPEED_100:
- return "100";
- case SPEED_10:
- return "10";
- }
-
- return "?";
-}
-
-static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
-{
- u32 t;
-
- t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
- | (((u32) mac[3]) << 8) | ((u32) mac[2]);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
-
- t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
-}
-
-static void ag71xx_dma_reset(struct ag71xx *ag)
-{
- u32 val;
- int i;
-
- ag71xx_dump_dma_regs(ag);
-
- /* stop RX and TX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-
- /*
- * give the hardware some time to really stop all rx/tx activity
- * clearing the descriptors too early causes random memory corruption
- */
- mdelay(1);
-
- /* clear descriptor addresses */
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
-
- /* clear pending RX/TX interrupts */
- for (i = 0; i < 256; i++) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
- }
-
- /* clear pending errors */
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
-
- val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (val)
- pr_alert("%s: unable to clear DMA Rx status: %08x\n",
- ag->dev->name, val);
-
- val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
-
- /* mask out reserved bits */
- val &= ~0xff000000;
-
- if (val)
- pr_alert("%s: unable to clear DMA Tx status: %08x\n",
- ag->dev->name, val);
-
- ag71xx_dump_dma_regs(ag);
-}
-
-#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
- MAC_CFG1_SRX | MAC_CFG1_STX)
-
-#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
-
-#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
- FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
- FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
- FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
- FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
- FIFO_CFG4_VT)
-
-#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
- FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
- FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
- FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
- FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
- FIFO_CFG5_17 | FIFO_CFG5_SF)
-
-static void ag71xx_hw_stop(struct ag71xx *ag)
-{
- /* disable all interrupts and stop the rx/tx engine */
- ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-}
-
-static void ag71xx_hw_setup(struct ag71xx *ag)
-{
- struct device_node *np = ag->pdev->dev.of_node;
- u32 init = MAC_CFG1_INIT;
-
- /* setup MAC configuration registers */
- if (of_property_read_bool(np, "flow-control"))
- init |= MAC_CFG1_TFC | MAC_CFG1_RFC;
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init);
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
- MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
-
- /* setup max frame length to zero */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0);
-
- /* setup FIFO configuration registers */
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, ag->fifodata[0]);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, ag->fifodata[1]);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
-}
-
-static void ag71xx_hw_init(struct ag71xx *ag)
-{
- ag71xx_hw_stop(ag);
-
- if (ag->phy_reset) {
- reset_control_assert(ag->phy_reset);
- msleep(50);
- reset_control_deassert(ag->phy_reset);
- msleep(200);
- }
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
- udelay(20);
-
- reset_control_assert(ag->mac_reset);
- msleep(100);
- reset_control_deassert(ag->mac_reset);
- msleep(200);
-
- ag71xx_hw_setup(ag);
-
- ag71xx_dma_reset(ag);
-}
-
-static void ag71xx_fast_reset(struct ag71xx *ag)
-{
- struct net_device *dev = ag->dev;
- u32 rx_ds;
- u32 mii_reg;
-
- ag71xx_hw_stop(ag);
- wmb();
-
- mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
- rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
-
- ag71xx_tx_packets(ag, true);
-
- reset_control_assert(ag->mac_reset);
- udelay(10);
- reset_control_deassert(ag->mac_reset);
- udelay(10);
-
- ag71xx_dma_reset(ag);
- ag71xx_hw_setup(ag);
- ag->tx_ring.curr = 0;
- ag->tx_ring.dirty = 0;
- netdev_reset_queue(ag->dev);
-
- /* setup max frame length */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
- ag71xx_max_frame_len(ag->dev->mtu));
-
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
- ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
-
- ag71xx_hw_set_macaddr(ag, dev->dev_addr);
-}
-
-static void ag71xx_hw_start(struct ag71xx *ag)
-{
- /* start RX engine */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
-
- /* enable interrupts */
- ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
-
- netif_wake_queue(ag->dev);
-}
-
-static void ath79_set_pllval(struct ag71xx *ag)
-{
- u32 pll_reg = ag->pllreg[1];
- u32 pll_val;
-
- if (!ag->pllregmap)
- return;
-
- switch (ag->speed) {
- case SPEED_10:
- pll_val = ag->plldata[2];
- break;
- case SPEED_100:
- pll_val = ag->plldata[1];
- break;
- case SPEED_1000:
- pll_val = ag->plldata[0];
- break;
- default:
- BUG();
- }
-
- if (pll_val)
- regmap_write(ag->pllregmap, pll_reg, pll_val);
-}
-
-static void ath79_set_pll(struct ag71xx *ag)
-{
- u32 pll_cfg = ag->pllreg[0];
- u32 pll_shift = ag->pllreg[2];
-
- if (!ag->pllregmap)
- return;
-
- regmap_update_bits(ag->pllregmap, pll_cfg, 3 << pll_shift, 2 << pll_shift);
- udelay(100);
-
- ath79_set_pllval(ag);
-
- regmap_update_bits(ag->pllregmap, pll_cfg, 3 << pll_shift, 3 << pll_shift);
- udelay(100);
-
- regmap_update_bits(ag->pllregmap, pll_cfg, 3 << pll_shift, 0);
- udelay(100);
-}
-
-static void ath79_mii_ctrl_set_speed(struct ag71xx *ag)
-{
- unsigned int mii_speed;
- u32 t;
-
- if (!ag->mii_base)
- return;
-
- switch (ag->speed) {
- case SPEED_10:
- mii_speed = AR71XX_MII_CTRL_SPEED_10;
- break;
- case SPEED_100:
- mii_speed = AR71XX_MII_CTRL_SPEED_100;
- break;
- case SPEED_1000:
- mii_speed = AR71XX_MII_CTRL_SPEED_1000;
- break;
- default:
- BUG();
- }
-
- t = __raw_readl(ag->mii_base);
- t &= ~(AR71XX_MII_CTRL_IF_MASK);
- t |= (mii_speed & AR71XX_MII_CTRL_IF_MASK);
- __raw_writel(t, ag->mii_base);
-}
-
-static void
-__ag71xx_link_adjust(struct ag71xx *ag, bool update)
-{
- struct device_node *np = ag->pdev->dev.of_node;
- u32 cfg2;
- u32 ifctl;
- u32 fifo5;
-
- if (!ag->link && update) {
- ag71xx_hw_stop(ag);
- netif_carrier_off(ag->dev);
- if (netif_msg_link(ag))
- pr_info("%s: link down\n", ag->dev->name);
- return;
- }
-
- if (!of_device_is_compatible(np, "qca,ar9130-eth") &&
- !of_device_is_compatible(np, "qca,ar7100-eth"))
- ag71xx_fast_reset(ag);
-
- cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
- cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
- cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
-
- ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
- ifctl &= ~(MAC_IFCTL_SPEED);
-
- fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
- fifo5 &= ~FIFO_CFG5_BM;
-
- switch (ag->speed) {
- case SPEED_1000:
- cfg2 |= MAC_CFG2_IF_1000;
- fifo5 |= FIFO_CFG5_BM;
- break;
- case SPEED_100:
- cfg2 |= MAC_CFG2_IF_10_100;
- ifctl |= MAC_IFCTL_SPEED;
- break;
- case SPEED_10:
- cfg2 |= MAC_CFG2_IF_10_100;
- break;
- default:
- BUG();
- return;
- }
-
- if (ag->tx_ring.desc_split) {
- ag->fifodata[2] &= 0xffff;
- ag->fifodata[2] |= ((2048 - ag->tx_ring.desc_split) / 4) << 16;
- }
-
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, ag->fifodata[2]);
-
- if (update) {
- if (of_device_is_compatible(np, "qca,ar7100-eth")) {
- ath79_set_pll(ag);
- ath79_mii_ctrl_set_speed(ag);
- } else if (of_device_is_compatible(np, "qca,ar7242-eth")) {
- ath79_set_pll(ag);
- } else if (of_device_is_compatible(np, "qca,ar9130-eth")) {
- } else if (of_device_is_compatible(np, "qca,ar9340-eth")) {
- } else if (of_device_is_compatible(np, "qca,qca9550-eth")) {
- } else if (of_device_is_compatible(np, "qca,qca9560-eth")) {
- }
- }
-
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
- ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
-
- if (of_device_is_compatible(np, "qca,qca9530-eth")) {
- /*
- * The rx ring buffer can stall on small packets on QCA953x and
- * QCA956x. Disabling the inline checksum engine fixes the stall.
- * The wr, rr functions cannot be used since this hidden register
- * is outside of the normal ag71xx register block.
- */
- void __iomem *dam = ioremap_nocache(0xb90001bc, 0x4);
- if (dam) {
- __raw_writel(__raw_readl(dam) & ~BIT(27), dam);
- (void)__raw_readl(dam);
- iounmap(dam);
- }
- }
-
- ag71xx_hw_start(ag);
-
- netif_carrier_on(ag->dev);
- if (update && netif_msg_link(ag))
- pr_info("%s: link up (%sMbps/%s duplex)\n",
- ag->dev->name,
- ag71xx_speed_str(ag),
- (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
-
- DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
-
- DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
-
- DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
- ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL));
-}
-
-void ag71xx_link_adjust(struct ag71xx *ag)
-{
- __ag71xx_link_adjust(ag, true);
-}
-
-static int ag71xx_hw_enable(struct ag71xx *ag)
-{
- int ret;
-
- ret = ag71xx_rings_init(ag);
- if (ret)
- return ret;
-
- napi_enable(&ag->napi);
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
- netif_start_queue(ag->dev);
-
- return 0;
-}
-
-static void ag71xx_hw_disable(struct ag71xx *ag)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ag->lock, flags);
-
- netif_stop_queue(ag->dev);
-
- ag71xx_hw_stop(ag);
- ag71xx_dma_reset(ag);
-
- napi_disable(&ag->napi);
- del_timer_sync(&ag->oom_timer);
-
- spin_unlock_irqrestore(&ag->lock, flags);
-
- ag71xx_rings_cleanup(ag);
-}
-
-static int ag71xx_open(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned int max_frame_len;
- int ret;
-
- netif_carrier_off(dev);
- max_frame_len = ag71xx_max_frame_len(dev->mtu);
- ag->rx_buf_size = SKB_DATA_ALIGN(max_frame_len + NET_SKB_PAD + NET_IP_ALIGN);
-
- /* setup max frame length */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len);
- ag71xx_hw_set_macaddr(ag, dev->dev_addr);
-
- ret = ag71xx_hw_enable(ag);
- if (ret)
- goto err;
-
- ag71xx_ar7240_start(ag);
- phy_start(ag->phy_dev);
-
- return 0;
-
-err:
- ag71xx_rings_cleanup(ag);
- return ret;
-}
-
-static int ag71xx_stop(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- netif_carrier_off(dev);
- phy_stop(ag->phy_dev);
- ag71xx_hw_disable(ag);
-
- return 0;
-}
-
-static int ag71xx_fill_dma_desc(struct ag71xx_ring *ring, u32 addr, int len)
-{
- int i;
- struct ag71xx_desc *desc;
- int ring_mask = BIT(ring->order) - 1;
- int ndesc = 0;
- int split = ring->desc_split;
-
- if (!split)
- split = len;
-
- while (len > 0) {
- unsigned int cur_len = len;
-
- i = (ring->curr + ndesc) & ring_mask;
- desc = ag71xx_ring_desc(ring, i);
-
- if (!ag71xx_desc_empty(desc))
- return -1;
-
- if (cur_len > split) {
- cur_len = split;
-
- /*
- * TX will hang if DMA transfers <= 4 bytes,
- * make sure next segment is more than 4 bytes long.
- */
- if (len <= split + 4)
- cur_len -= 4;
- }
-
- desc->data = addr;
- addr += cur_len;
- len -= cur_len;
-
- if (len > 0)
- cur_len |= DESC_MORE;
-
- /* prevent early tx attempt of this descriptor */
- if (!ndesc)
- cur_len |= DESC_EMPTY;
-
- desc->ctrl = cur_len;
- ndesc++;
- }
-
- return ndesc;
-}
-
-static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct ag71xx_ring *ring = &ag->tx_ring;
- int ring_mask = BIT(ring->order) - 1;
- int ring_size = BIT(ring->order);
- struct ag71xx_desc *desc;
- dma_addr_t dma_addr;
- int i, n, ring_min;
-
- if (skb->len <= 4) {
- DBG("%s: packet len is too small\n", ag->dev->name);
- goto err_drop;
- }
-
- dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
-
- i = ring->curr & ring_mask;
- desc = ag71xx_ring_desc(ring, i);
-
- /* setup descriptor fields */
- n = ag71xx_fill_dma_desc(ring, (u32) dma_addr, skb->len & ag->desc_pktlen_mask);
- if (n < 0)
- goto err_drop_unmap;
-
- i = (ring->curr + n - 1) & ring_mask;
- ring->buf[i].len = skb->len;
- ring->buf[i].skb = skb;
-
- netdev_sent_queue(dev, skb->len);
-
- skb_tx_timestamp(skb);
-
- desc->ctrl &= ~DESC_EMPTY;
- ring->curr += n;
-
- /* flush descriptor */
- wmb();
-
- ring_min = 2;
- if (ring->desc_split)
- ring_min *= AG71XX_TX_RING_DS_PER_PKT;
-
- if (ring->curr - ring->dirty >= ring_size - ring_min) {
- DBG("%s: tx queue full\n", dev->name);
- netif_stop_queue(dev);
- }
-
- DBG("%s: packet injected into TX queue\n", ag->dev->name);
-
- /* enable TX engine */
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
-
- return NETDEV_TX_OK;
-
-err_drop_unmap:
- dma_unmap_single(&dev->dev, dma_addr, skb->len, DMA_TO_DEVICE);
-
-err_drop:
- dev->stats.tx_dropped++;
-
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-}
-
-static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
- int ret;
-
- switch (cmd) {
- case SIOCETHTOOL:
- if (ag->phy_dev == NULL)
- break;
-
- spin_lock_irq(&ag->lock);
- ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
- spin_unlock_irq(&ag->lock);
- return ret;
-
- case SIOCSIFHWADDR:
- if (copy_from_user
- (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGIFHWADDR:
- if (copy_to_user
- (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- if (ag->phy_dev == NULL)
- break;
-
- return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
-
- default:
- break;
- }
-
- return -EOPNOTSUPP;
-}
-
-static void ag71xx_oom_timer_handler(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ag71xx *ag = netdev_priv(dev);
-
- napi_schedule(&ag->napi);
-}
-
-static void ag71xx_tx_timeout(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- if (netif_msg_tx_err(ag))
- pr_info("%s: tx timeout\n", ag->dev->name);
-
- schedule_delayed_work(&ag->restart_work, 1);
-}
-
-static void ag71xx_restart_work_func(struct work_struct *work)
-{
- struct ag71xx *ag = container_of(work, struct ag71xx, restart_work.work);
-
- rtnl_lock();
- ag71xx_hw_disable(ag);
- ag71xx_hw_enable(ag);
- if (ag->link)
- __ag71xx_link_adjust(ag, false);
- rtnl_unlock();
-}
-
-static bool ag71xx_check_dma_stuck(struct ag71xx *ag)
-{
- unsigned long timestamp;
- u32 rx_sm, tx_sm, rx_fd;
-
- timestamp = netdev_get_tx_queue(ag->dev, 0)->trans_start;
- if (likely(time_before(jiffies, timestamp + HZ/10)))
- return false;
-
- if (!netif_carrier_ok(ag->dev))
- return false;
-
- rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
- if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
- return true;
-
- tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
- rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
- if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
- ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
- return true;
-
- return false;
-}
-
-static int ag71xx_tx_packets(struct ag71xx *ag, bool flush)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- bool dma_stuck = false;
- int ring_mask = BIT(ring->order) - 1;
- int ring_size = BIT(ring->order);
- int sent = 0;
- int bytes_compl = 0;
- int n = 0;
-
- DBG("%s: processing TX ring\n", ag->dev->name);
-
- while (ring->dirty + n != ring->curr) {
- unsigned int i = (ring->dirty + n) & ring_mask;
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
- struct sk_buff *skb = ring->buf[i].skb;
-
- if (!flush && !ag71xx_desc_empty(desc)) {
- if (ag->tx_hang_workaround &&
- ag71xx_check_dma_stuck(ag)) {
- schedule_delayed_work(&ag->restart_work, HZ / 2);
- dma_stuck = true;
- }
- break;
- }
-
- if (flush)
- desc->ctrl |= DESC_EMPTY;
-
- n++;
- if (!skb)
- continue;
-
- dev_kfree_skb_any(skb);
- ring->buf[i].skb = NULL;
-
- bytes_compl += ring->buf[i].len;
-
- sent++;
- ring->dirty += n;
-
- while (n > 0) {
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
- n--;
- }
- }
-
- DBG("%s: %d packets sent out\n", ag->dev->name, sent);
-
- if (!sent)
- return 0;
-
- ag->dev->stats.tx_bytes += bytes_compl;
- ag->dev->stats.tx_packets += sent;
-
- netdev_completed_queue(ag->dev, sent, bytes_compl);
- if ((ring->curr - ring->dirty) < (ring_size * 3) / 4)
- netif_wake_queue(ag->dev);
-
- if (!dma_stuck)
- cancel_delayed_work(&ag->restart_work);
-
- return sent;
-}
-
-static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
-{
- struct net_device *dev = ag->dev;
- struct ag71xx_ring *ring = &ag->rx_ring;
- unsigned int pktlen_mask = ag->desc_pktlen_mask;
- unsigned int offset = ag->rx_buf_offset;
- int ring_mask = BIT(ring->order) - 1;
- int ring_size = BIT(ring->order);
- struct sk_buff_head queue;
- struct sk_buff *skb;
- int done = 0;
-
- DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
- dev->name, limit, ring->curr, ring->dirty);
-
- skb_queue_head_init(&queue);
-
- while (done < limit) {
- unsigned int i = ring->curr & ring_mask;
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
- int pktlen;
- int err = 0;
-
- if (ag71xx_desc_empty(desc))
- break;
-
- if ((ring->dirty + ring_size) == ring->curr) {
- ag71xx_assert(0);
- break;
- }
-
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
-
- pktlen = desc->ctrl & pktlen_mask;
- pktlen -= ETH_FCS_LEN;
-
- dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
- ag->rx_buf_size, DMA_FROM_DEVICE);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pktlen;
-
- skb = build_skb(ring->buf[i].rx_buf, ag71xx_buffer_size(ag));
- if (!skb) {
- skb_free_frag(ring->buf[i].rx_buf);
- goto next;
- }
-
- skb_reserve(skb, offset);
- skb_put(skb, pktlen);
-
- if (err) {
- dev->stats.rx_dropped++;
- kfree_skb(skb);
- } else {
- skb->dev = dev;
- skb->ip_summed = CHECKSUM_NONE;
- __skb_queue_tail(&queue, skb);
- }
-
-next:
- ring->buf[i].rx_buf = NULL;
- done++;
-
- ring->curr++;
- }
-
- ag71xx_ring_rx_refill(ag);
-
- while ((skb = __skb_dequeue(&queue)) != NULL) {
- skb->protocol = eth_type_trans(skb, dev);
- netif_receive_skb(skb);
- }
-
- DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
- dev->name, ring->curr, ring->dirty, done);
-
- return done;
-}
-
-static int ag71xx_poll(struct napi_struct *napi, int limit)
-{
- struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
- struct net_device *dev = ag->dev;
- struct ag71xx_ring *rx_ring = &ag->rx_ring;
- int rx_ring_size = BIT(rx_ring->order);
- unsigned long flags;
- u32 status;
- int tx_done;
- int rx_done;
-
- tx_done = ag71xx_tx_packets(ag, false);
-
- DBG("%s: processing RX ring\n", dev->name);
- rx_done = ag71xx_rx_packets(ag, limit);
-
- ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
-
- if (rx_ring->buf[rx_ring->dirty % rx_ring_size].rx_buf == NULL)
- goto oom;
-
- status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (unlikely(status & RX_STATUS_OF)) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
- dev->stats.rx_fifo_errors++;
-
- /* restart RX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
- }
-
- if (rx_done < limit) {
- if (status & RX_STATUS_PR)
- goto more;
-
- status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
- if (status & TX_STATUS_PS)
- goto more;
-
- DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
- dev->name, rx_done, tx_done, limit);
-
- napi_complete(napi);
-
- /* enable interrupts */
- spin_lock_irqsave(&ag->lock, flags);
- ag71xx_int_enable(ag, AG71XX_INT_POLL);
- spin_unlock_irqrestore(&ag->lock, flags);
- return rx_done;
- }
-
-more:
- DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
- dev->name, rx_done, tx_done, limit);
- return limit;
-
-oom:
- if (netif_msg_rx_err(ag))
- pr_info("%s: out of memory\n", dev->name);
-
- mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
- napi_complete(napi);
- return 0;
-}
-
-static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct ag71xx *ag = netdev_priv(dev);
- u32 status;
-
- status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
- ag71xx_dump_intr(ag, "raw", status);
-
- if (unlikely(!status))
- return IRQ_NONE;
-
- if (unlikely(status & AG71XX_INT_ERR)) {
- if (status & AG71XX_INT_TX_BE) {
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
- dev_err(&dev->dev, "TX BUS error\n");
- }
- if (status & AG71XX_INT_RX_BE) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
- dev_err(&dev->dev, "RX BUS error\n");
- }
- }
-
- if (likely(status & AG71XX_INT_POLL)) {
- ag71xx_int_disable(ag, AG71XX_INT_POLL);
- DBG("%s: enable polling mode\n", dev->name);
- napi_schedule(&ag->napi);
- }
-
- ag71xx_debugfs_update_int_stats(ag, status);
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void ag71xx_netpoll(struct net_device *dev)
-{
- disable_irq(dev->irq);
- ag71xx_interrupt(dev->irq, dev);
- enable_irq(dev->irq);
-}
-#endif
-
-static int ag71xx_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- dev->mtu = new_mtu;
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
- ag71xx_max_frame_len(dev->mtu));
-
- return 0;
-}
-
-static const struct net_device_ops ag71xx_netdev_ops = {
- .ndo_open = ag71xx_open,
- .ndo_stop = ag71xx_stop,
- .ndo_start_xmit = ag71xx_hard_start_xmit,
- .ndo_do_ioctl = ag71xx_do_ioctl,
- .ndo_tx_timeout = ag71xx_tx_timeout,
- .ndo_change_mtu = ag71xx_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ag71xx_netpoll,
-#endif
-};
-
-static const char *ag71xx_get_phy_if_mode_name(phy_interface_t mode)
-{
- switch (mode) {
- case PHY_INTERFACE_MODE_MII:
- return "MII";
- case PHY_INTERFACE_MODE_GMII:
- return "GMII";
- case PHY_INTERFACE_MODE_RMII:
- return "RMII";
- case PHY_INTERFACE_MODE_RGMII:
- return "RGMII";
- case PHY_INTERFACE_MODE_SGMII:
- return "SGMII";
- default:
- break;
- }
-
- return "unknown";
-}
-
-static void ag71xx_of_bit(struct device_node *np, const char *prop,
- u32 *reg, u32 mask)
-{
- u32 val;
-
- if (of_property_read_u32(np, prop, &val))
- return;
-
- if (val)
- *reg |= mask;
- else
- *reg &= ~mask;
-}
-
-static void ag71xx_setup_gmac_933x(struct device_node *np, void __iomem *base)
-{
- u32 val = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
-
- ag71xx_of_bit(np, "switch-phy-swap", &val, AR933X_ETH_CFG_SW_PHY_SWAP);
- ag71xx_of_bit(np, "switch-phy-addr-swap", &val,
- AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
-
- __raw_writel(val, base + AR933X_GMAC_REG_ETH_CFG);
-}
-
-static int ag71xx_setup_gmac(struct device_node *np)
-{
- struct device_node *np_dev;
- void __iomem *base;
- int err = 0;
-
- np = of_get_child_by_name(np, "gmac-config");
- if (!np)
- return 0;
-
- np_dev = of_parse_phandle(np, "device", 0);
- if (!np_dev)
- goto out;
-
- base = of_iomap(np_dev, 0);
- if (!base) {
- pr_err("%pOF: can't map GMAC registers\n", np_dev);
- err = -ENOMEM;
- goto err_iomap;
- }
-
- if (of_device_is_compatible(np_dev, "qca,ar9330-gmac"))
- ag71xx_setup_gmac_933x(np, base);
-
- iounmap(base);
-
-err_iomap:
- of_node_put(np_dev);
-out:
- of_node_put(np);
- return err;
-}
-
-static int ag71xx_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct net_device *dev;
- struct resource *res;
- struct ag71xx *ag;
- const void *mac_addr;
- u32 max_frame_len;
- int tx_size, err;
-
- if (!np)
- return -ENODEV;
-
- dev = alloc_etherdev(sizeof(*ag));
- if (!dev)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -EINVAL;
-
- err = ag71xx_setup_gmac(np);
- if (err)
- return err;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- ag = netdev_priv(dev);
- ag->pdev = pdev;
- ag->dev = dev;
- ag->msg_enable = netif_msg_init(ag71xx_msg_level,
- AG71XX_DEFAULT_MSG_ENABLE);
- spin_lock_init(&ag->lock);
-
- ag->mac_reset = devm_reset_control_get(&pdev->dev, "mac");
- if (IS_ERR(ag->mac_reset)) {
- dev_err(&pdev->dev, "missing mac reset\n");
- err = PTR_ERR(ag->mac_reset);
- goto err_free;
- }
-
- ag->phy_reset = devm_reset_control_get_optional(&pdev->dev, "phy");
-
- if (of_property_read_u32_array(np, "fifo-data", ag->fifodata, 3)) {
- if (of_device_is_compatible(np, "qca,ar9130-eth") ||
- of_device_is_compatible(np, "qca,ar7100-eth")) {
- ag->fifodata[0] = 0x0fff0000;
- ag->fifodata[1] = 0x00001fff;
- } else {
- ag->fifodata[0] = 0x0010ffff;
- ag->fifodata[1] = 0x015500aa;
- ag->fifodata[2] = 0x01f00140;
- }
- if (of_device_is_compatible(np, "qca,ar9130-eth"))
- ag->fifodata[2] = 0x00780fff;
- else if (of_device_is_compatible(np, "qca,ar7100-eth"))
- ag->fifodata[2] = 0x008001ff;
- }
-
- if (of_property_read_u32_array(np, "pll-data", ag->plldata, 3))
- dev_dbg(&pdev->dev, "failed to read pll-data property\n");
-
- if (of_property_read_u32_array(np, "pll-reg", ag->pllreg, 3))
- dev_dbg(&pdev->dev, "failed to read pll-reg property\n");
-
- ag->pllregmap = syscon_regmap_lookup_by_phandle(np, "pll-handle");
- if (IS_ERR(ag->pllregmap)) {
- dev_dbg(&pdev->dev, "failed to read pll-handle property\n");
- ag->pllregmap = NULL;
- }
-
- ag->mac_base = devm_ioremap_nocache(&pdev->dev, res->start,
- res->end - res->start + 1);
- if (!ag->mac_base) {
- err = -ENOMEM;
- goto err_free;
- }
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (res) {
- ag->mii_base = devm_ioremap_nocache(&pdev->dev, res->start,
- res->end - res->start + 1);
- if (!ag->mii_base) {
- err = -ENOMEM;
- goto err_free;
- }
- }
-
- dev->irq = platform_get_irq(pdev, 0);
- err = devm_request_irq(&pdev->dev, dev->irq, ag71xx_interrupt,
- 0x0, dev_name(&pdev->dev), dev);
- if (err) {
- dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
- goto err_free;
- }
-
- dev->netdev_ops = &ag71xx_netdev_ops;
- dev->ethtool_ops = &ag71xx_ethtool_ops;
-
- INIT_DELAYED_WORK(&ag->restart_work, ag71xx_restart_work_func);
-
- init_timer(&ag->oom_timer);
- ag->oom_timer.data = (unsigned long) dev;
- ag->oom_timer.function = ag71xx_oom_timer_handler;
-
- tx_size = AG71XX_TX_RING_SIZE_DEFAULT;
- ag->rx_ring.order = ag71xx_ring_size_order(AG71XX_RX_RING_SIZE_DEFAULT);
-
- if (of_device_is_compatible(np, "qca,ar9340-eth") ||
- of_device_is_compatible(np, "qca,qca9530-eth") ||
- of_device_is_compatible(np, "qca,qca9550-eth") ||
- of_device_is_compatible(np, "qca,qca9560-eth"))
- ag->desc_pktlen_mask = SZ_16K - 1;
- else
- ag->desc_pktlen_mask = SZ_4K - 1;
-
- if (ag->desc_pktlen_mask == SZ_16K - 1 &&
- !of_device_is_compatible(np, "qca,qca9550-eth") &&
- !of_device_is_compatible(np, "qca,qca9560-eth"))
- max_frame_len = ag->desc_pktlen_mask;
- else
- max_frame_len = 1540;
-
- dev->min_mtu = 68;
- dev->max_mtu = max_frame_len - ag71xx_max_frame_len(0);
-
- if (of_device_is_compatible(np, "qca,ar7240-eth"))
- ag->tx_hang_workaround = 1;
-
- ag->rx_buf_offset = NET_SKB_PAD;
- if (!of_device_is_compatible(np, "qca,ar7100-eth") &&
- !of_device_is_compatible(np, "qca,ar9130-eth"))
- ag->rx_buf_offset += NET_IP_ALIGN;
-
- if (of_device_is_compatible(np, "qca,ar7100-eth")) {
- ag->tx_ring.desc_split = AG71XX_TX_RING_SPLIT;
- tx_size *= AG71XX_TX_RING_DS_PER_PKT;
- }
- ag->tx_ring.order = ag71xx_ring_size_order(tx_size);
-
- ag->stop_desc = dmam_alloc_coherent(&pdev->dev,
- sizeof(struct ag71xx_desc),
- &ag->stop_desc_dma, GFP_KERNEL);
- if (!ag->stop_desc)
- goto err_free;
-
- ag->stop_desc->data = 0;
- ag->stop_desc->ctrl = 0;
- ag->stop_desc->next = (u32) ag->stop_desc_dma;
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
- if (!mac_addr || !is_valid_ether_addr(dev->dev_addr)) {
- dev_err(&pdev->dev, "invalid MAC address, using random address\n");
- eth_random_addr(dev->dev_addr);
- }
-
- ag->phy_if_mode = of_get_phy_mode(np);
- if (ag->phy_if_mode < 0) {
- dev_err(&pdev->dev, "missing phy-mode property in DT\n");
- err = ag->phy_if_mode;
- goto err_free;
- }
-
- netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, 0);
- ag71xx_hw_init(ag);
- ag71xx_mdio_init(ag);
-
- err = ag71xx_phy_connect(ag);
- if (err)
- goto err_mdio_free;
-
- err = ag71xx_debugfs_init(ag);
- if (err)
- goto err_phy_disconnect;
-
- platform_set_drvdata(pdev, dev);
-
- err = register_netdev(dev);
- if (err) {
- dev_err(&pdev->dev, "unable to register net device\n");
- platform_set_drvdata(pdev, NULL);
- ag71xx_debugfs_exit(ag);
- goto err_phy_disconnect;
- }
-
- pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode:%s\n",
- dev->name, (unsigned long) ag->mac_base, dev->irq,
- ag71xx_get_phy_if_mode_name(ag->phy_if_mode));
-
- return 0;
-
-err_phy_disconnect:
- ag71xx_phy_disconnect(ag);
-err_mdio_free:
- ag71xx_mdio_cleanup(ag);
-err_free:
- free_netdev(dev);
- return err;
-}
-
-static int ag71xx_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct ag71xx *ag;
-
- if (!dev)
- return 0;
-
- ag = netdev_priv(dev);
- ag71xx_debugfs_exit(ag);
- ag71xx_phy_disconnect(ag);
- ag71xx_mdio_cleanup(ag);
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- iounmap(ag->mac_base);
- kfree(dev);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-static const struct of_device_id ag71xx_match[] = {
- { .compatible = "qca,ar7100-eth" },
- { .compatible = "qca,ar7240-eth" },
- { .compatible = "qca,ar7241-eth" },
- { .compatible = "qca,ar7242-eth" },
- { .compatible = "qca,ar9130-eth" },
- { .compatible = "qca,ar9330-eth" },
- { .compatible = "qca,ar9340-eth" },
- { .compatible = "qca,qca9530-eth" },
- { .compatible = "qca,qca9550-eth" },
- { .compatible = "qca,qca9560-eth" },
- {}
-};
-
-static struct platform_driver ag71xx_driver = {
- .probe = ag71xx_probe,
- .remove = ag71xx_remove,
- .driver = {
- .name = AG71XX_DRV_NAME,
- .of_match_table = ag71xx_match,
- }
-};
-
-static int __init ag71xx_module_init(void)
-{
- int ret;
-
- ret = ag71xx_debugfs_root_init();
- if (ret)
- goto err_out;
-
- ret = platform_driver_register(&ag71xx_driver);
- if (ret)
- goto err_debugfs_exit;
-
- return 0;
-
-err_debugfs_exit:
- ag71xx_debugfs_root_exit();
-err_out:
- return ret;
-}
-
-static void __exit ag71xx_module_exit(void)
-{
- platform_driver_unregister(&ag71xx_driver);
- ag71xx_debugfs_root_exit();
-}
-
-module_init(ag71xx_module_init);
-module_exit(ag71xx_module_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/of_mdio.h>
-#include "ag71xx.h"
-
-#define AG71XX_MDIO_RETRY 1000
-#define AG71XX_MDIO_DELAY 5
-
-static int bus_count;
-
-static int ag71xx_mdio_wait_busy(struct ag71xx *ag)
-{
- int i;
-
- for (i = 0; i < AG71XX_MDIO_RETRY; i++) {
- u32 busy;
-
- udelay(AG71XX_MDIO_DELAY);
-
- regmap_read(ag->mii_regmap, AG71XX_REG_MII_IND, &busy);
- if (!busy)
- return 0;
-
- udelay(AG71XX_MDIO_DELAY);
- }
-
- pr_err("%s: MDIO operation timed out\n", ag->mii_bus->name);
-
- return -ETIMEDOUT;
-}
-
-int ag71xx_mdio_mii_read(struct mii_bus *bus, int addr, int reg)
-{
- struct ag71xx *ag = bus->priv;
- int err;
- int ret;
-
- err = ag71xx_mdio_wait_busy(ag);
- if (err)
- return 0xffff;
-
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_CMD, MII_CMD_READ);
-
- err = ag71xx_mdio_wait_busy(ag);
- if (err)
- return 0xffff;
-
- regmap_read(ag->mii_regmap, AG71XX_REG_MII_STATUS, &ret);
- ret &= 0xffff;
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
-
- DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
-
- return ret;
-}
-
-int ag71xx_mdio_mii_write(struct mii_bus *bus, int addr, int reg, u16 val)
-{
- struct ag71xx *ag = bus->priv;
-
- DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
-
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_CTRL, val);
-
- ag71xx_mdio_wait_busy(ag);
-
- return 0;
-}
-
-static int ar934x_mdio_clock_div(unsigned int rate)
-{
- if (rate == 100 * 1000 * 1000)
- return 6; /* 100 MHz clock divided by 20 => 5 MHz */
- else if (rate == 25 * 1000 * 1000)
- return 0; /* 25 MHz clock divided by 4 => 6.25 MHz */
- else
- return 3; /* 40 MHz clock divided by 8 => 5 MHz */
-}
-
-static int ag71xx_mdio_reset(struct mii_bus *bus)
-{
- struct device_node *np = bus->dev.of_node;
- struct ag71xx *ag = bus->priv;
- struct device_node *np_ag = ag->pdev->dev.of_node;
- bool builtin_switch;
- u32 t;
-
- builtin_switch = of_property_read_bool(np, "builtin-switch");
-
- if (of_device_is_compatible(np_ag, "qca,ar7240-eth"))
- t = MII_CFG_CLK_DIV_6;
- else if (of_device_is_compatible(np_ag, "qca,ar9340-eth"))
- t = MII_CFG_CLK_DIV_58;
- else if (builtin_switch)
- t = MII_CFG_CLK_DIV_10;
- else
- t = MII_CFG_CLK_DIV_28;
-
- if (builtin_switch && of_device_is_compatible(np_ag, "qca,ar9340-eth")) {
- struct clk *ref_clk = of_clk_get(np, 0);
- int clock_rate;
-
- if (WARN_ON_ONCE(!ref_clk))
- clock_rate = 40 * 1000 * 1000;
- else
- clock_rate = clk_get_rate(ref_clk);
-
- t = ar934x_mdio_clock_div(clock_rate);
- clk_put(ref_clk);
- }
-
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
- udelay(100);
-
- regmap_write(ag->mii_regmap, AG71XX_REG_MII_CFG, t);
- udelay(100);
-
- return 0;
-}
-
-int ag71xx_mdio_init(struct ag71xx *ag)
-{
- struct device *parent = &ag->pdev->dev;
- struct device_node *np;
- struct mii_bus *mii_bus;
- bool builtin_switch;
- int i, err;
-
- np = of_get_child_by_name(parent->of_node, "mdio-bus");
- if (!np)
- return -ENODEV;
-
- if (!of_device_is_available(np)) {
- err = 0;
- goto err_out;
- }
-
- ag->mii_regmap = syscon_regmap_lookup_by_phandle(np, "regmap");
- if (!ag->mii_regmap)
- return -ENOENT;
-
- mii_bus = devm_mdiobus_alloc(parent);
- if (!mii_bus) {
- err = -ENOMEM;
- goto err_out;
- }
-
- ag->mdio_reset = of_reset_control_get_exclusive(np, "mdio");
- builtin_switch = of_property_read_bool(np, "builtin-switch");
-
- mii_bus->name = "mdio";
- if (builtin_switch) {
- mii_bus->read = ar7240sw_phy_read;
- mii_bus->write = ar7240sw_phy_write;
- } else {
- mii_bus->read = ag71xx_mdio_mii_read;
- mii_bus->write = ag71xx_mdio_mii_write;
- }
- mii_bus->reset = ag71xx_mdio_reset;
- mii_bus->priv = ag;
- mii_bus->parent = parent;
- snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s.%d", np->name, bus_count++);
-
- if (!builtin_switch &&
- of_property_read_u32(np, "phy-mask", &mii_bus->phy_mask))
- mii_bus->phy_mask = 0;
-
- for (i = 0; i < PHY_MAX_ADDR; i++)
- mii_bus->irq[i] = PHY_POLL;
-
- if (!IS_ERR(ag->mdio_reset)) {
- reset_control_assert(ag->mdio_reset);
- msleep(100);
- reset_control_deassert(ag->mdio_reset);
- msleep(200);
- }
-
- err = of_mdiobus_register(mii_bus, np);
- if (err)
- goto err_out;
-
- ag->mii_bus = mii_bus;
-
- if (builtin_switch)
- ag71xx_ar7240_init(ag, np);
-
- return 0;
-
-err_out:
- of_node_put(np);
- return err;
-}
-
-void ag71xx_mdio_cleanup(struct ag71xx *ag)
-{
- if (!ag->mii_bus)
- return;
-
- ag71xx_ar7240_cleanup(ag);
- mdiobus_unregister(ag->mii_bus);
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/of_mdio.h>
-#include "ag71xx.h"
-
-static void ag71xx_phy_link_adjust(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
- unsigned long flags;
- int status_change = 0;
-
- spin_lock_irqsave(&ag->lock, flags);
-
- if (phydev->link) {
- if (ag->duplex != phydev->duplex
- || ag->speed != phydev->speed) {
- status_change = 1;
- }
- }
-
- if (phydev->link != ag->link)
- status_change = 1;
-
- ag->link = phydev->link;
- ag->duplex = phydev->duplex;
- ag->speed = phydev->speed;
-
- if (status_change)
- ag71xx_link_adjust(ag);
-
- spin_unlock_irqrestore(&ag->lock, flags);
-}
-
-int ag71xx_phy_connect(struct ag71xx *ag)
-{
- struct device_node *np = ag->pdev->dev.of_node;
- struct device_node *phy_node;
- int ret;
-
- if (of_phy_is_fixed_link(np)) {
- ret = of_phy_register_fixed_link(np);
- if (ret < 0) {
- dev_err(&ag->pdev->dev,
- "Failed to register fixed PHY link: %d\n", ret);
- return ret;
- }
-
- phy_node = of_node_get(np);
- } else {
- phy_node = of_parse_phandle(np, "phy-handle", 0);
- }
-
- if (!phy_node) {
- dev_err(&ag->pdev->dev,
- "Could not find valid phy node\n");
- return -ENODEV;
- }
-
- ag->phy_dev = of_phy_connect(ag->dev, phy_node, ag71xx_phy_link_adjust,
- 0, ag->phy_if_mode);
-
- of_node_put(phy_node);
-
- if (!ag->phy_dev) {
- dev_err(&ag->pdev->dev,
- "Could not connect to PHY device\n");
- return -ENODEV;
- }
-
- dev_info(&ag->pdev->dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
- phydev_name(ag->phy_dev),
- ag->phy_dev->phy_id, ag->phy_dev->drv->name);
-
- return 0;
-}
-
-void ag71xx_phy_disconnect(struct ag71xx *ag)
-{
- phy_disconnect(ag->phy_dev);
-}
+++ /dev/null
-CONFIG_BLK_MQ_PCI=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_LEDS_RESET=y
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHY_AR7100_USB=y
-CONFIG_PHY_AR7200_USB=y
-# CONFIG_WIRELESS is not set
-# CONFIG_WLAN is not set
+++ /dev/null
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
- NAME:=Default Profile (all drivers)
- PRIORITY := 1
-endef
-
-define Profile/Default/Description
- Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))
+++ /dev/null
-BOARDNAME:=Generic
-FEATURES += squashfs
-
-define Target/Description
- Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards.
-endef
-
-
+++ /dev/null
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-KERNEL_LOADADDR = 0x80060000
-
-DEVICE_VARS += CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE ATH_SOC
-
-define Build/loader-common
- rm -rf $@.src
- $(MAKE) -C lzma-loader \
- PKG_BUILD_DIR="$@.src" \
- TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
- BOARD="$(BOARDNAME)" \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- $(1) compile loader.$(LOADER_TYPE)
- mv "$@.$(LOADER_TYPE)" "$@"
- rm -rf $@.src
-endef
-
-define Build/loader-kernel
- $(call Build/loader-common,LOADER_DATA="$@")
-endef
-
-define Build/loader-kernel-cmdline
- $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
-endef
-
-
-define Build/loader-okli-compile
- $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
-endef
-
-define Build/loader-okli
- dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
- cat "$@" >> "$@.new"
- mv "$@.new" "$@"
-endef
-
-define Build/relocate-kernel
- rm -rf $@.relocate
- $(CP) ../../generic/image/relocate $@.relocate
- $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
- ( \
- dd if=$@.relocate/loader.bin bs=32 conv=sync && \
- perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
- cat "$@" \
- ) > "$@.new"
- mv "$@.new" "$@"
- rm -rf $@.relocate
-endef
-
-define Build/copy-file
- cat "$(1)" > "$@"
-endef
-
-define Device/Default
- ATH_SOC :=
- BOARDNAME :=
- DEVICE_PROFILE = $$(BOARDNAME)
- DEVICE_DTS_DIR := ../dts
- DEVICE_DTS = $$(ATH_SOC)_$(1)
- PROFILES = Default Minimal $$(DEVICE_PROFILE)
- MTDPARTS :=
- BLOCKSIZE := 64k
- CONSOLE = ttyS0,115200
- CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
- KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
- KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
- COMPILE :=
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
-endef
-
-ifeq ($(SUBTARGET),generic)
-include ./tp-link.mk
-include ./generic.mk
-include ./generic-ubnt.mk
-endif
-$(eval $(call BuildImage))
+++ /dev/null
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
-
-# mkubntimage is using the kernel image direct
-# routerboard creates partitions out of the ubnt header
-define Build/mkubntimage
- -$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@
-endef
-
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
-# booting the image, the size doesn't matter.
-define Build/mkubntimage-split
- -[ -f $@ ] && ( \
- dd if=$@ of=$@.old1 bs=1024k count=1; \
- dd if=$@ of=$@.old2 bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $@.old1 \
- -r $@.old2 \
- -o $@; \
- rm $@.old1 $@.old2 )
-endef
-
-define Build/mkubntimage2
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-define Device/ubnt
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- UBNT_BOARD := XM
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
-endef
-
-define Device/ubnt-xm
- $(Device/ubnt)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci
- UBNT_TYPE := XM
- UBNT_CHIP := ar7240
- ATH_SOC := ar7241
- KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
-endef
-
-define Device/ubnt-xw
- $(Device/ubnt)
- UBNT_TYPE := XW
- UBNT_CHIP := ar934x
-endef
-
-define Device/ubnt-bz
- $(Device/ubnt)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar7240
-endef
-
-define Device/rw2458n
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti RW2458N
- BOARDNAME := RW2458N
-endef
-#TARGET_DEVICES += rw2458n
-
-define Device/ubnt-airrouter
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti AirRouter
- BOARDNAME := UBNT-AR
-endef
-#TARGET_DEVICES += ubnt-airrouter
-
-define Device/ubnt-bullet-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Bullet-M
- BOARDNAME := UBNT-BM
-endef
-TARGET_DEVICES += ubnt-bullet-m
-
-define Device/ubnt-rocket-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Rocket-M
- BOARDNAME := UBNT-RM
-endef
-TARGET_DEVICES += ubnt-rocket-m
-
-define Device/ubnt-nano-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Nano-M
- BOARDNAME := UBNT-NM
-endef
-TARGET_DEVICES += ubnt-nano-m
-
-define Device/ubnt-unifi
- $(Device/ubnt-bz)
- ATH_SOC := ar7241
- DEVICE_TITLE := Ubiquiti UniFi
- BOARDNAME := UBNT-UF
- DEVICE_PROFILE += UBNTUNIFI
-endef
-TARGET_DEVICES += ubnt-unifi
-
-define Device/ubnt-unifiac
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-unifiac-lite
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Lite
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACLITE
- BOARDNAME := UBNT-UF-AC-LITE
-endef
-#TARGET_DEVICES += ubnt-unifiac-lite
-
-define Device/ubnt-unifiac-mesh
- $(Device/ubnt-unifiac-lite)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
-endef
-#TARGET_DEVICES += ubnt-unifiac-mesh
-
-define Device/ubnt-unifiac-pro
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACPRO
- BOARDNAME := UBNT-UF-AC-PRO
-endef
-#TARGET_DEVICES += ubnt-unifiac-pro
-
-define Device/ubnt-unifi-outdoor
- $(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor
- BOARDNAME := UBNT-U20
- DEVICE_PROFILE += UBNTUNIFIOUTDOOR
-endef
-#TARGET_DEVICES += ubnt-unifi-outdoor
-
-define Device/ubnt-nano-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Nano M XW
- BOARDNAME := UBNT-NM-XW
-endef
-#TARGET_DEVICES += ubnt-nano-m-xw
-
-define Device/ubnt-loco-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Loco XW
- BOARDNAME := UBNT-LOCO-XW
-endef
-#TARGET_DEVICES += ubnt-loco-m-xw
-
-define Device/ubnt-rocket-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M XW
- BOARDNAME := UBNT-RM-XW
-endef
-#TARGET_DEVICES += ubnt-rocket-m-xw
-
-define Device/ubnt-rocket-m-ti
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M TI
- BOARDNAME := UBNT-RM-TI
- UBNT_TYPE := TI
-endef
-#TARGET_DEVICES += ubnt-rocket-m-ti
-
-define Device/ubnt-air-gateway
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway
- BOARDNAME := UBNT-AGW
- UBNT_TYPE := AirGW
- UBNT_CHIP := ar933x
- CONSOLE := ttyATH0,115200
-endef
-#TARGET_DEVICES += ubnt-air-gateway
-
-define Device/ubnt-air-gateway-pro
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway Pro
- BOARDNAME := UBNT-AGWP
- UBNT_TYPE := AirGWP
- UBNT_CHIP := ar934x
-endef
-#TARGET_DEVICES += ubnt-air-gateway-pro
-
-define Device/ubdev01
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti ubDEV01
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
- BOARDNAME := UBNT-UF
- UBNT_BOARD := UBDEV01
-endef
-#TARGET_DEVICES += ubdev01
-
-define Device/ubnt-routerstation
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 16128k
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
-endef
-
-define Device/ubnt-rs
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation
- BOARDNAME := UBNT-RS
- DEVICE_PROFILE += UBNTRS
- UBNT_BOARD := RS
- UBNT_TYPE := RSx
- UBNT_CHIP := ar7100
-endef
-#TARGET_DEVICES += ubnt-rs
-
-define Device/ubnt-rspro
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation Pro
- BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE += UBNTRSPRO
- UBNT_BOARD := RSPRO
- UBNT_TYPE := RSPRO
- UBNT_CHIP := ar7100pro
-endef
-#TARGET_DEVICES += ubnt-rspro
-
-define Device/ubnt-ls-sr71
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti LS-SR71
- BOARDNAME := UBNT-LS-SR71
- UBNT_BOARD := LS-SR71
- UBNT_TYPE := LS-SR71
- UBNT_CHIP := ar7100
-endef
-#TARGET_DEVICES += ubnt-ls-sr71
-
-define Device/ubnt-uap-pro
- DEVICE_TITLE := Ubiquiti UAP Pro
- KERNEL_SIZE := 1536k
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar934x
- BOARDNAME := UAP-PRO
- DEVICE_PROFILE := UBNT UAPPRO
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
-endef
-
-define Device/ubnt-unifi-outdoor-plus
- $(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
- UBNT_CHIP := ar7240
- BOARDNAME := UBNT-UOP
- DEVICE_PROFILE := UBNT
-endef
+++ /dev/null
-define Build/netgear-squashfs
- rm -rf $@.fs $@.squashfs
- mkdir -p $@.fs/image
- cp $@ $@.fs/image/uImage
- $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
- $@.fs $@.squashfs \
- -noappend -root-owned -be -b 65536 \
- $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
-
- dd if=/dev/zero bs=1k count=1 >> $@.squashfs
- mkimage \
- -A mips -O linux -T filesystem -C none \
- -M $(NETGEAR_KERNEL_MAGIC) \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $@.squashfs $@
- rm -rf $@.squashfs $@.fs
-endef
-
-define Build/netgear-uImage
- $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
-endef
-
-define Device/ew_dorin
- ATH_SOC := ar9331
- DEVICE_TITLE := Embedded Wireless Dorin
- DEVICE_PACKAGES := kmod-usb-chipidea2
-endef
-
-TARGET_DEVICES += ew_dorin
-
-define Device/gl_ar150
- ATH_SOC := ar9330
- DEVICE_TITLE := GL.iNet GL-AR150
- DEVICE_PACKAGES := kmod-usb-chipidea2
- IMAGE_SIZE := 16000k
-endef
-TARGET_DEVICES += gl_ar150
-
-define Device/om5p_ac
- ATH_SOC := qca9558
- DEVICE_TITLE := OpenMesh OM5P-AC
- DEVICE_PROFILE := OM5P-AC
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog
-endef
-
-TARGET_DEVICES += om5p_ac
-
-define Device/netgear_wndr3700
- ATH_SOC:=ar7100
- DEVICE_TITLE := NETGEAR WNDR3700
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
- NETGEAR_KERNEL_MAGIC := 0x33373030
- NETGEAR_BOARD_ID := WNDR3700
- IMAGE_SIZE := 7680k
- IMAGES := sysupgrade.bin factory.img factory-NA.img
- KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
- KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
-endef
-#TARGET_DEVICES += netgear_wndr3700
-
-define Device/netgear_wndr3700v2
- $(Device/netgear_wndr3700)
- DEVICE_TITLE := NETGEAR WNDR3700 v2
- NETGEAR_BOARD_ID := WNDR3700v2
- NETGEAR_KERNEL_MAGIC := 0x33373031
- NETGEAR_HW_ID := 29763654+16+64
- IMAGE_SIZE := 15872k
- IMAGES := sysupgrade.bin factory.img
-endef
-#TARGET_DEVICES += netgear_wndr3700v2
-
-define Device/netgear_wndr3800
- $(Device/netgear_wndr3700v2)
- ATH_SOC := ar7161
- DEVICE_TITLE := NETGEAR WNDR3800
- NETGEAR_BOARD_ID := WNDR3800
- NETGEAR_HW_ID := 29763654+16+128
-endef
-TARGET_DEVICES += netgear_wndr3800
-
-define Device/buffalo_wzr-hp-g450h
- ATH_SOC := ar7242
- DEVICE_TITLE := Buffalo WZR-HP-G450H
- DEVICE_PROFILE := WZR-HP-G450H
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-
-TARGET_DEVICES += buffalo_wzr-hp-g450h
+++ /dev/null
-rootfs_type=$(patsubst squashfs-%,squashfs,$(1))
-
-# $(1): rootfs type.
-# $(2): board name.
-define imgname
-$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
-endef
-
-define rootfs_align
-$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
-endef
-
-define sysupname
-$(call imgname,$(1),$(2))-sysupgrade.bin
-endef
-
-define factoryname
-$(call imgname,$(1),$(2))-factory.bin
-endef
-
-COMMA:=,
-
-define mkcmdline
-$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
-endef
-
-define mtdpartsize
-$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
-endef
-
-# $(1) : name of image build method to be used, e.g., AthLzma.
-# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
-# $(3) : name of the profile to be defined.
-# $(4) : board name.
-# $(5)~$(7) : arguments for $(mkcmdline)
-# board=$(1) console=$(2),$(3)
-# $(8)~$(14): extra arguments.
-define SingleProfile
- # $(1): action name, e.g. loader, buildkernel, squashfs, etc.
- define Image/Build/Profile/$(3)
- $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
- endef
-endef
-
-LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
-
-VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
-UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
-
-# $(1): input file.
-# $(2): output file.
-# $(3): extra arguments for lzma.
-define CompressLzma
- $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
-endef
-
-define PatchKernel
- cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
-endef
-
-define PatchKernel/initramfs
- $(call PatchKernel,$(1),$(2),-initramfs)
- cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
-endef
-
-# $(1): board name.
-# $(2): kernel command line.
-# $(3): extra argumetns for lzma.
-# $(4): name suffix, e.g. "-initramfs".
-define PatchKernelLzma
- cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
- $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
-endef
-
-define PatchKernelGzip
- cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
- gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
-endef
-
-ifneq ($(SUBTARGET),mikrotik)
-# $(1): compression method of the data.
-# $(2): extra arguments.
-# $(3): input data file.
-# $(4): output file.
-define MkuImage
- mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
- -e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $(3) $(4)
-endef
-
-# $(1): board name.
-# $(2): kernel command line.
-# $(3): extra arguments for lzma.
-# $(4): name suffix, e.g. "-initramfs".
-# $(5): extra arguments for mkimage.
-define MkuImageLzma
- $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
- $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
-endef
-
-define MkuImageLzma/initramfs
- $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
- $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
-endef
-
-define MkuImageGzip
- $(call PatchKernelGzip,$(1),$(2))
- $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
-endef
-
-define MkuImageGzip/initramfs
- $(call PatchKernelGzip,$(1),$(2),-initramfs)
- $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
-endef
-
-define MkuImageOKLI
- $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
-endef
-endif
-
-# $(1): name of the 1st file.
-# $(2): size limit of the 1st file if it is greater than 262144, or
-# the erase size of the flash if it is greater than zero and less
-# than 262144
-# $(3): name of the 2nd file.
-# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
-# it is the size limit of the output file
-# $(5): name of the output file.
-# $(6): padding size.
-define CatFiles
- if [ $(2) -eq 0 ]; then \
- filename="$(3)"; fstype=$${filename##*\.}; \
- case "$${fstype}" in \
- *) bs=`stat -c%s $(1)`;; \
- esac; \
- ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \
- if [ -n "$(6)" ]; then \
- case "$${fstype}" in \
- squashfs*) \
- padjffs2 $(5) $(6); \
- ;; \
- esac; \
- fi; \
- if [ `stat -c%s $(5)` -gt $(4) ]; then \
- echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
- rm -f $(5); \
- fi; \
- else if [ $(2) -gt 262144 ]; then \
- if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
- echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
- else if [ `stat -c%s $(3)` -gt $(4) ]; then \
- echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- fi; fi; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- if [ `stat -c%s $(5)` -gt $(4) ]; then \
- echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
- rm -f $(5); \
- fi; \
- fi; fi
-endef
-
-# $(1): rootfs type.
-# $(2): board name.
-# $(3): kernel image size limit.
-# $(4): rootfs image size limit.
-# $(5): padding argument for padjffs2.
-Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
-Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
-Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
-
-# $(1): ubinize ini file
-# $(2): working directory
-# $(3): output file
-# $(4): physical erase block size
-# $(5): minimum I/O unit size
-# $(6): custom options
-define ubinize
- $(CP) $(1) $(2)
- ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
-endef
-
-#
-# Embed lzma-compressed kernel inside lzma-loader.
-#
-# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
-# $(2), suffix of target file to build, e.g. bin, gz, elf
-# $(3), kernel command line to pass from lzma-loader to kernel
-# $(4), unused here
-# $(5), suffix of kernel filename, e.g. -initramfs, or empty
-define Image/BuildLoader
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
- compile loader.$(2)
- -$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2))
-endef
-
-#
-# Build lzma-loader alone which will search for lzma-compressed kernel identified by
-# uImage header with magic "OKLI" at boot time.
-#
-# $(4), offset into the flash space to start searching uImage magic "OKLI".
-# $(5), size of search range starting at $(4). With 0 as the value, uImage
-# header is expected to be at precisely $(4)
-define Image/BuildLoaderAlone
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
- compile loader.$(2)
-endef
-
-define Build/Clean
- $(LOADER_MAKE) clean
-endef
-
-alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown)
-alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
-alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
-alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
-all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro
-all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
-ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
-ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
-ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware)
-ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware)
-ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
-ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
-ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
-cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
-cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
-cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
-cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
-cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
-cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
-cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
-cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
-cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware)
-eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
-db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
-dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
-dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro
-dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro
-dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro
-cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
-cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
-esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
-esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
-epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
-f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
-dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
-dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
-planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
-whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro
-wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
-wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
-r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
-tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
-zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
-mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
-zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
-
-define Image/BuildKernel
- cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
- cp $(KDIR)/vmlinux $(VMLINUX).bin
- dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
- $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
- cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
- -mkdir -p $(KDIR_TMP)
-endef
-
-define Image/BuildKernel/Initramfs
- cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
- cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
- dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
- $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
- cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
- $(call Image/Build/Initramfs)
-endef
-
-Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
-
-define Image/Build/WRT400N
- $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-define Image/Build/CameoAP94/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(4))
- $(call MkuImageLzma,$(2)-fat,$(3) $(5))
-endef
-
-define Image/Build/CameoAP94
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- dd if=$(call sysupname,$(1),$(2)); \
- echo -n "$(6)"; \
- ) > $(call imgname,$(1),$(2))-backup-loader.bin; \
- if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
- echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
- else \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
- echo -n "$(7)"; \
- ) > $(call factoryname,$(1),$(2)); \
- fi; \
- fi
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
- if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
- echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- "$(KDIR_TMP)/$(2)-fat.bin" \
- "$(KDIR_TMP)/$(2)-fat.dummy" \
- $(call sysupname,$(1),$(2)-fat); \
- fi
-endef
-
-define Image/Build/WZRHP
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
- dd if=$(call sysupname,$(1),$(2)); \
- ) > $(call imgname,$(1),$(2))-tftp.bin; \
- buffalo-enc -p $(5) -v 1.99 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(KDIR_TMP)/$(2).enc; \
- buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
- -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
- -i $(KDIR_TMP)/$(2).enc \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
-Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
-
-Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
-Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
-
-
-Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/WHRHPG300N
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
- dd if=$(call sysupname,$(1),$(2)); \
- ) > $(call imgname,$(1),$(2))-tftp.bin; \
- buffalo-enc -p $(5) -v 1.99 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(KDIR_TMP)/$(2).enc; \
- buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
- -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
- -i $(KDIR_TMP)/$(2).enc \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-define Image/Build/Cameo
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- factory_size=$$(($(fwsize) - $(6))); \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \
- echo -n $(5); \
- ) > $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
-Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
-Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
-
-Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
-Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
-Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
-
-Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
-Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
-Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
-
-Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
-Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
-Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
-
-Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
-Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
-Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
-Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
-
-Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
-Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
-Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
-
-define Image/Build/CameoHornet
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- for r in $(7); do \
- [ -n "$$r" ] && dashr="-$$r" || dashr=; \
- [ -z "$$r" ] && r="DEF"; \
- mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \
- -K $(8) -I $(fwsize) \
- -k "$(call sysupname,$(1),$(2))" \
- -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \
- true; \
- done; \
- fi
-endef
-
-Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
-Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
-Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
-
-Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
-Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
-Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
-
-define Image/Build/dLAN
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
-endef
-
-Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Ath
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
-endef
-
-Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
-Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
-
-Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-
-Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Belkin
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
- -n "uImage" \
- -i $(KDIR_TMP)/vmlinux-$(2).uImage \
- -o $(KDIR_TMP)/$(2)-uImage; \
- edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
- -n "rootfs" \
- -i $(KDIR)/root.$(1) \
- -o $(KDIR_TMP)/$(2)-rootfs; \
- ( \
- dd if=$(KDIR_TMP)/$(2)-rootfs; \
- dd if=$(KDIR_TMP)/$(2)-uImage; \
- ) > "$(call factoryname,$(1),$(2))"; \
- fi
-endef
-
-define Image/Build/EnGenius
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- mksenaofw -e $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory.dlf \
- -r 0x101 -p $(7) -t 2; \
- fi
-endef
-
-Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-
-Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-
-define Image/Build/PB4X
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
- of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
- dd if=$(KDIR)/root.$(1) \
- of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
- -sh $(TOPDIR)/scripts/combined-image.sh \
- "$(call imgname,kernel,$(2)).bin" \
- "$(call imgname,$(1),$(2)-rootfs).bin" \
- $(call sysupname,$(1),$(2))
-endef
-
-
-Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
-
-define Image/Build/MyLoader
- $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
- $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
- if [ -e "$(fwimage)" ]; then \
- $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
- -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
- $(call imgname,$(1),$(2))-$(5)-factory.img; \
- echo -n "" > $(KDIR_TMP)/empty.bin; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- $(fwimage) $(KDIR_TMP)/empty.bin \
- $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
- fi
-endef
-
-Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
-Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
-
-define Image/Build/Planex/buildkernel
- [ -e "$(KDIR)/loader-$(2).gz" ]
- $(call MkuImageOKLI,$(2))
- ( \
- dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
- dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
- ) > $(KDIR_TMP)/kernel-$(2).bin
- $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
-endef
-
-define Image/Build/Planex
- $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- $(STAGING_DIR_HOST)/bin/mkplanexfw \
- -B $(2) \
- -v 2.00.00 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/ALFA
- $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- rm -rf $(KDIR)/$(1); \
- mkdir -p $(KDIR)/$(1); \
- cd $(KDIR)/$(1); \
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
- cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
- $(TAR) c \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- -C $(KDIR)/$(1) $(7) $(8) \
- | gzip -9nc > $(call factoryname,$(1),$(2)); \
- ( \
- echo WRM7222C | dd bs=32 count=1 conv=sync; \
- echo -ne '\xfe'; \
- ) >> $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Senao
- mkdir -p $(KDIR_TMP)/$(2)/
- touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
- -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
- dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
- of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
- dd if=$(KDIR)/root.$(1) \
- of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
- ( \
- cd $(KDIR_TMP)/$(2)/; \
- $(TAR) -c \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- * | gzip -9nc > $(call factoryname,$(1),$(2)) \
- )
- -rm -rf $(KDIR_TMP)/$(2)/
- -sh $(TOPDIR)/scripts/combined-image.sh \
- $(KDIR_TMP)/vmlinux-$(2).uImage \
- $(KDIR)/root.$(1) \
- $(call sysupname,$(1),$(2))
-endef
-
-define Image/Build/CyberTAN
- echo -n '' > $(KDIR_TMP)/empty.bin
- -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
- -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
- -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
- $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
- -i $(KDIR)/image.tmp \
- -o $(call sysupname,$(1),$(2))
- -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
- -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
- $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
- -i $(KDIR)/image.tmp \
- -o $(call factoryname,$(1),$(2))
- -rm $(KDIR)/image.tmp
-endef
-
-Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
-Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
-Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
-
-Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
-
-
-Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-
-define Image/Build/Netgear/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
- -rm -rf $(KDIR_TMP)/$(2)
- mkdir -p $(KDIR_TMP)/$(2)/image
- cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
- $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
- $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
- -noappend -root-owned -be -b 65536 \
- $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
- ( \
- cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
- dd if=/dev/zero bs=1k count=1 \
- ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
- mkimage -A mips -O linux -T filesystem -C none -M $(5) \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
- $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
-endef
-
-define Image/Build/Netgear
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
- if [ -e $(call sysupname,$(1),$(2)) ]; then \
- for r in $(7) ; do \
- [ -n "$$r" ] && dashr="-$$r" || dashr= ; \
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory$$dashr.img; \
- done; \
- fi
- if [ "$2" = "wnr2000" ]; then \
- dd if=$(KDIR)/root.$(1) \
- of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
- fi
-endef
-
-
-Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
-
-define Image/Build/NetgearLzma
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
-endef
-
-
-Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-
-# $(1): (empty)
-# $(2): Board name (small caps)
-# $(3): Kernel board specific cmdline
-# $(4): Kernel mtdparts definition
-# $(5): U-Boot magic
-define Image/Build/NetgearNAND/buildkernel
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(call PatchKernelLzma,$(2),$(3) $(4),-d20)
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
- of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
- bs=$$(($(kernelsize)-131072-2*64-1)) \
- count=1 conv=sync
- $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
- echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
- # create a fake rootfs image
- dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
- mkimage -A mips -O linux -T filesystem -C none \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) fakeroot' \
- -d $(KDIR_TMP)/fakeroot-$(2) \
- -M $(5) \
- $(KDIR_TMP)/fakeroot-$(2).uImage
- # append the fake rootfs image to the kernel, it will reside in the last
- # erase block of the kernel partition
- cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
-endef
-
-
-# $(1): rootfs image suffix
-# $(2): Board name (small caps)
-# $(3): Kernel board specific cmdline
-# $(4): Kernel mtdparts definition
-# $(5): U-Boot magic
-# $(6): Board name (upper caps)
-# $(7): firmware region code (not used yet)
-# $(8): DNI Hardware version
-# $(9): suffix of the configuration file for ubinize
-define Image/Build/NetgearNAND
- $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
- $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
- echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
- $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
- ( \
- dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
- dd if=$(KDIR_TMP)/$(2)-root.ubi \
- ) > $(imageraw)
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
- -i $(imageraw) \
- -o $(call imgname,ubi,$(2))-factory.img
-
- $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
-endef
-
-ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin
-ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin)
-
-Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
-
-define Image/Build/ZyXEL
- $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- if [ ! -f $(ZYXEL_UBOOT) ]; then \
- echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \
- else \
- $(STAGING_DIR_HOST)/bin/mkzynfw \
- -B $(4) \
- -b $(ZYXEL_UBOOT) \
- -r $(call sysupname,$(1),$(2)):0x10000 \
- -o $(call factoryname,$(1),$(2)); \
- fi; fi
-endef
-
-define Image/Build/ZyXELNAND/buildkernel
- $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
- $(call MkuImageLzma,$(2),$(3) $(5) $(6))
- mkdir -p $(KDIR_TMP)/$(2)/image/boot
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
- --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
- -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
- -d $(KDIR_TMP)/$(2)/image \
- 2>&1 1>/dev/null | awk '/^.+$$/'
- -rm -rf $(KDIR_TMP)/$(2)
-endef
-
-define Image/Build/ZyXELNAND
- if [ "$(1)" != "squashfs" ]; then \
- echo Only squashfs is supported; \
- return 0; \
- fi
- $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
- $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
- $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
- ( \
- dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
- dd if=$(KDIR_TMP)/$(2)-root.ubi \
- ) > $(imageraw)
- dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
- bs=128k conv=sync
- $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
-endef
-
-
-Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
-Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),)
-
-define Image/Build/OpenMesh
- -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
- "$(4)" \
- "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
- "$(KDIR_TMP)/vmlinux-$(2).uImage" \
- "$(KDIR)/root.$(1)"
- -sh $(TOPDIR)/scripts/combined-ext-image.sh \
- "$(4)" "$(call factoryname,$(1),$(2))" \
- "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
- "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
- "$(KDIR)/root.$(1)" "rootfs"
- if [ -e "$(call factoryname,$(1),$(2))" ]; then \
- cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \
- fi
-endef
-
-
-Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Zcomax
- $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- $(STAGING_DIR_HOST)/bin/mkzcfw \
- -B $(2) \
- -k $(KDIR_TMP)/vmlinux-$(2).uImage \
- -r $(KDIR)/root.$(1) \
- -o $(call imgname,$(1),$(2))-factory.img; \
- fi
-endef
-
-
-# $(1): template name to be defined.
-# $(2): squashfs suffix to be used.
-define BuildTemplate
- # $(1) : name of build method.
- # $(2) : board name.
- # $(3) : kernel command line.
- # $(4)~$(8): extra arguments.
- define Image/Build/Template/$(1)/initramfs
- $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/loader
- $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/buildkernel
- $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/squashfs
- $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
-endef
-
-$(eval $(call BuildTemplate,squashfs-only))
-$(eval $(call BuildTemplate,64k,-64k))
-$(eval $(call BuildTemplate,64kraw,-raw))
-$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
-$(eval $(call BuildTemplate,128k))
-$(eval $(call BuildTemplate,128kraw,-raw))
-$(eval $(call BuildTemplate,256k))
-$(eval $(call BuildTemplate,all))
-
-ifeq ($(SUBTARGET),generic)
-$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
-$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
-$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
-
-$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536))
-
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
-$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
-$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
-$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
-$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
-
-$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
-
-$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
-
-$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
-$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00"))
-
-$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-
-$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
-
-$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01))
-$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
-
-$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
-
-$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
-$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536))
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536))
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536))
-
-$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
-$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
-$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
-
-$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
-
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,))
-
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
-
-$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
-
-$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
-$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
-
-$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
-
-$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
-
-$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
-
-$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
-$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
-
-endif # ifeq ($(SUBTARGET),generic)
-
-
-ifeq ($(SUBTARGET),tiny)
-
-$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
-$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
-$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
-
-$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03"))
-$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
-$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
-
-$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
-$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
-
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
-
-$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
-$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
-
-$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
-
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
-$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,))
-$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,))
-
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
-
-$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
-
-endif # ifeq ($(SUBTARGET),tiny)
-
-
-ifeq ($(SUBTARGET),nand)
-
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
-$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
-
-$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
-
-endif # ifeq ($(SUBTARGET),nand)
-
-define Image/Build/squashfs
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
- $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
-endef
-
-define Image/Prepare
- $(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT))
- $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
- $(call Image/BuildLoader,generic,elf,,,-initramfs)
-endif
- $(call Image/BuildLoader,generic,elf)
-endef
-
-define Image/Prepare/Profile
- $(call Image/Build/Profile/$(1),loader)
-endef
-
-define Image/Build/Profile
- $(call Image/Build/Profile/$(1),buildkernel)
- $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs))
- $(call Image/Build/Profile/$(1),$(2))
-endef
-
-# $(1): filesystem type.
-define Image/Build
- $(call Image/Build/$(call rootfs_type,$(1)),$(1))
-endef
+++ /dev/null
-#
-# Copyright (C) 2011 OpenWrt.org
-# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-LZMA_TEXT_START := 0x80a00000
-LOADADDR := 0x80060000
-LOADER := loader.bin
-LOADER_NAME := $(basename $(notdir $(LOADER)))
-LOADER_DATA :=
-TARGET_DIR :=
-FLASH_OFFS :=
-FLASH_MAX :=
-BOARD :=
-
-ifeq ($(TARGET_DIR),)
-TARGET_DIR := $(KDIR)
-endif
-
-LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin
-LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz
-LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf
-
-PKG_NAME := lzma-loader
-PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
-
-.PHONY : loader-compile loader.bin loader.elf loader.gz
-
-$(PKG_BUILD_DIR)/.prepared:
- mkdir $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)/
- touch $@
-
-loader-compile: $(PKG_BUILD_DIR)/.prepared
- $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
- LZMA_TEXT_START=$(LZMA_TEXT_START) \
- LOADADDR=$(LOADADDR) \
- LOADER_DATA=$(LOADER_DATA) \
- FLASH_OFFS=$(FLASH_OFFS) \
- FLASH_MAX=$(FLASH_MAX) \
- BOARD="$(BOARD)" \
- clean all
-
-loader.gz: $(PKG_BUILD_DIR)/loader.bin
- gzip -nc9 $< > $(LOADER_GZ)
-
-loader.elf: $(PKG_BUILD_DIR)/loader.elf
- $(CP) $< $(LOADER_ELF)
-
-loader.bin: $(PKG_BUILD_DIR)/loader.bin
- $(CP) $< $(LOADER_BIN)
-
-download:
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: loader-compile
-
-install:
-
-clean:
- rm -rf $(PKG_BUILD_DIR)
-
+++ /dev/null
-/*
- LzmaDecode.c
- LZMA Decoder (optimized for Speed version)
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this Code, expressly permits you to
- statically or dynamically link your Code (or bind by name) to the
- interfaces of this file without subjecting your linked Code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
- { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
- BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
- { UpdateBit0(p); mi <<= 1; A0; } else \
- { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
-
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
- { int i = numLevels; res = 1; \
- do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
- res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
- unsigned char prop0;
- if (size < LZMA_PROPERTIES_SIZE)
- return LZMA_RESULT_DATA_ERROR;
- prop0 = propsData[0];
- if (prop0 >= (9 * 5 * 5))
- return LZMA_RESULT_DATA_ERROR;
- {
- for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
- for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
- propsRes->lc = prop0;
- /*
- unsigned char remainder = (unsigned char)(prop0 / 9);
- propsRes->lc = prop0 % 9;
- propsRes->pb = remainder / 5;
- propsRes->lp = remainder % 5;
- */
- }
-
- #ifdef _LZMA_OUT_READ
- {
- int i;
- propsRes->DictionarySize = 0;
- for (i = 0; i < 4; i++)
- propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
- if (propsRes->DictionarySize == 0)
- propsRes->DictionarySize = 1;
- }
- #endif
- return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
- CProb *p = vs->Probs;
- SizeT nowPos = 0;
- Byte previousByte = 0;
- UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
- int lc = vs->Properties.lc;
-
- #ifdef _LZMA_OUT_READ
-
- UInt32 Range = vs->Range;
- UInt32 Code = vs->Code;
- #ifdef _LZMA_IN_CB
- const Byte *Buffer = vs->Buffer;
- const Byte *BufferLim = vs->BufferLim;
- #else
- const Byte *Buffer = inStream;
- const Byte *BufferLim = inStream + inSize;
- #endif
- int state = vs->State;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
- UInt32 distanceLimit = vs->DistanceLimit;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->Properties.DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- Byte tempDictionary[4];
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
- if (len == kLzmaStreamWasFinishedId)
- return LZMA_RESULT_OK;
-
- if (dictionarySize == 0)
- {
- dictionary = tempDictionary;
- dictionarySize = 1;
- tempDictionary[0] = vs->TempDictionary[0];
- }
-
- if (len == kLzmaNeedInitId)
- {
- {
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- UInt32 i;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- rep0 = rep1 = rep2 = rep3 = 1;
- state = 0;
- globalPos = 0;
- distanceLimit = 0;
- dictionaryPos = 0;
- dictionary[dictionarySize - 1] = 0;
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
- }
- len = 0;
- }
- while(len != 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-
- #else /* if !_LZMA_OUT_READ */
-
- int state = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- int len = 0;
- const Byte *Buffer;
- const Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
-
- {
- UInt32 i;
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- }
-
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
-
- #endif /* _LZMA_OUT_READ */
-
- while(nowPos < outSize)
- {
- CProb *prob;
- UInt32 bound;
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
-
- prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- int symbol = 1;
- UpdateBit0(prob)
- prob = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state >= kNumLitStates)
- {
- int matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- do
- {
- int bit;
- CProb *probLit;
- matchByte <<= 1;
- bit = (matchByte & 0x100);
- probLit = prob + 0x100 + bit + symbol;
- RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
- }
- while (symbol < 0x100);
- }
- while (symbol < 0x100)
- {
- CProb *probLit = prob + symbol;
- RC_GET_BIT(probLit, symbol)
- }
- previousByte = (Byte)symbol;
-
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
-
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRep + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < kNumLitStates ? 0 : 3;
- prob = p + LenCoder;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG0 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- UpdateBit0(prob);
-
- #ifdef _LZMA_OUT_READ
- if (distanceLimit == 0)
- #else
- if (nowPos == 0)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- state = state < kNumLitStates ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
- #endif
-
- continue;
- }
- else
- {
- UpdateBit1(prob);
- }
- }
- else
- {
- UInt32 distance;
- UpdateBit1(prob);
- prob = p + IsRepG1 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep1;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG2 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep2;
- }
- else
- {
- UpdateBit1(prob);
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- state = state < kNumLitStates ? 8 : 11;
- prob = p + RepLenCoder;
- }
- {
- int numBits, offset;
- CProb *probLen = prob + LenChoice;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenLow + (posState << kLenNumLowBits);
- offset = 0;
- numBits = kLenNumLowBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenChoice2;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenMid + (posState << kLenNumMidBits);
- offset = kLenNumLowSymbols;
- numBits = kLenNumMidBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenHigh;
- offset = kLenNumLowSymbols + kLenNumMidSymbols;
- numBits = kLenNumHighBits;
- }
- }
- RangeDecoderBitTreeDecode(probLen, numBits, len);
- len += offset;
- }
-
- if (state < 4)
- {
- int posSlot;
- state += kNumLitStates;
- prob = p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits);
- RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = (2 | ((UInt32)posSlot & 1));
- if (posSlot < kEndPosModelIndex)
- {
- rep0 <<= numDirectBits;
- prob = p + SpecPos + rep0 - posSlot - 1;
- }
- else
- {
- numDirectBits -= kNumAlignBits;
- do
- {
- RC_NORMALIZE
- Range >>= 1;
- rep0 <<= 1;
- if (Code >= Range)
- {
- Code -= Range;
- rep0 |= 1;
- }
- }
- while (--numDirectBits != 0);
- prob = p + Align;
- rep0 <<= kNumAlignBits;
- numDirectBits = kNumAlignBits;
- }
- {
- int i = 1;
- int mi = 1;
- do
- {
- CProb *prob3 = prob + mi;
- RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
- i <<= 1;
- }
- while(--numDirectBits != 0);
- }
- }
- else
- rep0 = posSlot;
- if (++rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = kLzmaStreamWasFinishedId;
- break;
- }
- }
-
- len += kMatchMinLen;
- #ifdef _LZMA_OUT_READ
- if (rep0 > distanceLimit)
- #else
- if (rep0 > nowPos)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- #ifdef _LZMA_OUT_READ
- if (dictionarySize - distanceLimit > (UInt32)len)
- distanceLimit += len;
- else
- distanceLimit = dictionarySize;
- #endif
-
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- len--;
- outStream[nowPos++] = previousByte;
- }
- while(len != 0 && nowPos < outSize);
- }
- }
- RC_NORMALIZE;
-
- #ifdef _LZMA_OUT_READ
- vs->Range = Range;
- vs->Code = Code;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + (UInt32)nowPos;
- vs->DistanceLimit = distanceLimit;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->RemainLen = len;
- vs->TempDictionary[0] = tempDictionary[0];
- #endif
-
- #ifdef _LZMA_IN_CB
- vs->Buffer = Buffer;
- vs->BufferLim = BufferLim;
- #else
- *inSizeProcessed = (SizeT)(Buffer - inStream);
- #endif
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
+++ /dev/null
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
- int lc;
- int lp;
- int pb;
- #ifdef _LZMA_OUT_READ
- UInt32 DictionarySize;
- #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
- CLzmaProperties Properties;
- CProb *Probs;
-
- #ifdef _LZMA_IN_CB
- const unsigned char *Buffer;
- const unsigned char *BufferLim;
- #endif
-
- #ifdef _LZMA_OUT_READ
- unsigned char *Dictionary;
- UInt32 Range;
- UInt32 Code;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 DistanceLimit;
- UInt32 Reps[4];
- int State;
- int RemainLen;
- unsigned char TempDictionary[4];
- #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
+++ /dev/null
-/*
-LzmaTypes.h
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif
-
-/* #define _LZMA_NO_SYSTEM_SIZE_T */
-/* You can use it, if you don't want <stddef.h> */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_NO_SYSTEM_SIZE_T
-typedef UInt32 SizeT;
-#else
-#include <stddef.h>
-typedef size_t SizeT;
-#endif
-#endif
-
-#endif
+++ /dev/null
-#
-# Makefile for the LZMA compressed kernel loader for
-# Atheros AR7XXX/AR9XXX based boards
-#
-# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# Some parts of this file was based on the OpenWrt specific lzma-loader
-# for the BCM47xx and ADM5120 based boards:
-# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
-# Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
-# Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-#
-
-LOADADDR :=
-LZMA_TEXT_START := 0x80a00000
-LOADER_DATA :=
-BOARD :=
-FLASH_OFFS :=
-FLASH_MAX :=
-
-CC := $(CROSS_COMPILE)gcc
-LD := $(CROSS_COMPILE)ld
-OBJCOPY := $(CROSS_COMPILE)objcopy
-OBJDUMP := $(CROSS_COMPILE)objdump
-
-BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug \
- -R .MIPS.abiflags -S
-
-CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
- -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \
- -fno-common -ffreestanding -fhonour-copts \
- -mabi=32 -march=mips32r2 \
- -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap
-CFLAGS += -D_LZMA_PROB32
-
-ASFLAGS = $(CFLAGS) -D__ASSEMBLY__
-
-LDFLAGS = -static --gc-sections -no-warn-mismatch
-LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
-
-O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
-
-OBJECTS := head.o loader.o cache.o board.o printf.o LzmaDecode.o
-
-ifneq ($(strip $(LOADER_DATA)),)
-OBJECTS += data.o
-CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
-endif
-
-ifneq ($(strip $(KERNEL_CMDLINE)),)
-CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"'
-endif
-
-ifneq ($(strip $(FLASH_OFFS)),)
-CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS)
-endif
-
-ifneq ($(strip $(FLASH_MAX)),)
-CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX)
-endif
-
-BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _)
-ifneq ($(BOARD_DEF),)
-CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF)
-endif
-
-all: loader.elf
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-%.o : %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-%.o : %.S
- $(CC) $(ASFLAGS) -c -o $@ $<
-
-data.o: $(LOADER_DATA)
- $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
-
-loader: $(OBJECTS)
- $(LD) $(LDFLAGS) -o $@ $(OBJECTS)
-
-loader.bin: loader
- $(OBJCOPY) $(BIN_FLAGS) $< $@
-
-loader2.o: loader.bin
- $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
-
-loader.elf: loader2.o
- $(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
-
-mrproper: clean
-
-clean:
- rm -f loader *.elf *.bin *.o
-
-
-
+++ /dev/null
-/*
- * Atheros AR71XX/AR724X/AR913X SoC register definitions
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_AR71XX_REGS_H
-#define __ASM_MACH_AR71XX_REGS_H
-
-#define BIT(_x) (1UL << (_x))
-
-#define AR71XX_APB_BASE 0x18000000
-#define AR71XX_GE0_BASE 0x19000000
-#define AR71XX_GE0_SIZE 0x10000
-#define AR71XX_GE1_BASE 0x1a000000
-#define AR71XX_GE1_SIZE 0x10000
-#define AR71XX_EHCI_BASE 0x1b000000
-#define AR71XX_EHCI_SIZE 0x1000
-#define AR71XX_OHCI_BASE 0x1c000000
-#define AR71XX_OHCI_SIZE 0x1000
-#define AR71XX_SPI_BASE 0x1f000000
-#define AR71XX_SPI_SIZE 0x01000000
-
-#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000)
-#define AR71XX_DDR_CTRL_SIZE 0x100
-#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
-#define AR71XX_UART_SIZE 0x100
-#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-#define AR71XX_USB_CTRL_SIZE 0x100
-#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
-#define AR71XX_GPIO_SIZE 0x100
-#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
-#define AR71XX_PLL_SIZE 0x100
-#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
-#define AR71XX_RESET_SIZE 0x100
-#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR71XX_MII_SIZE 0x100
-
-#define AR71XX_PCI_MEM_BASE 0x10000000
-#define AR71XX_PCI_MEM_SIZE 0x07000000
-
-#define AR71XX_PCI_WIN0_OFFS 0x10000000
-#define AR71XX_PCI_WIN1_OFFS 0x11000000
-#define AR71XX_PCI_WIN2_OFFS 0x12000000
-#define AR71XX_PCI_WIN3_OFFS 0x13000000
-#define AR71XX_PCI_WIN4_OFFS 0x14000000
-#define AR71XX_PCI_WIN5_OFFS 0x15000000
-#define AR71XX_PCI_WIN6_OFFS 0x16000000
-#define AR71XX_PCI_WIN7_OFFS 0x07000000
-
-#define AR71XX_PCI_CFG_BASE \
- (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
-#define AR71XX_PCI_CFG_SIZE 0x100
-
-#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-#define AR7240_USB_CTRL_SIZE 0x100
-#define AR7240_OHCI_BASE 0x1b000000
-#define AR7240_OHCI_SIZE 0x1000
-
-#define AR724X_PCI_MEM_BASE 0x10000000
-#define AR724X_PCI_MEM_SIZE 0x04000000
-
-#define AR724X_PCI_CFG_BASE 0x14000000
-#define AR724X_PCI_CFG_SIZE 0x1000
-#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000)
-#define AR724X_PCI_CRP_SIZE 0x1000
-#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
-#define AR724X_PCI_CTRL_SIZE 0x100
-
-#define AR724X_EHCI_BASE 0x1b000000
-#define AR724X_EHCI_SIZE 0x1000
-
-#define AR913X_EHCI_BASE 0x1b000000
-#define AR913X_EHCI_SIZE 0x1000
-#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
-#define AR913X_WMAC_SIZE 0x30000
-
-#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
-#define AR933X_UART_SIZE 0x14
-#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR933X_GMAC_SIZE 0x04
-#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-#define AR933X_WMAC_SIZE 0x20000
-#define AR933X_EHCI_BASE 0x1b000000
-#define AR933X_EHCI_SIZE 0x1000
-
-#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR934X_GMAC_SIZE 0x14
-#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-#define AR934X_WMAC_SIZE 0x20000
-#define AR934X_EHCI_BASE 0x1b000000
-#define AR934X_EHCI_SIZE 0x200
-
-#define QCA955X_PCI_MEM_BASE0 0x10000000
-#define QCA955X_PCI_MEM_BASE1 0x12000000
-#define QCA955X_PCI_MEM_SIZE 0x02000000
-#define QCA955X_PCI_CFG_BASE0 0x14000000
-#define QCA955X_PCI_CFG_BASE1 0x16000000
-#define QCA955X_PCI_CFG_SIZE 0x1000
-#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
-#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
-#define QCA955X_PCI_CRP_SIZE 0x1000
-#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
-#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
-#define QCA955X_PCI_CTRL_SIZE 0x100
-
-#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-#define QCA955X_WMAC_SIZE 0x20000
-#define QCA955X_EHCI0_BASE 0x1b000000
-#define QCA955X_EHCI1_BASE 0x1b400000
-#define QCA955X_EHCI_SIZE 0x1000
-#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-#define QCA955X_GMAC_SIZE 0x40
-
-#define AR9300_OTP_BASE 0x14000
-#define AR9300_OTP_STATUS 0x15f18
-#define AR9300_OTP_STATUS_TYPE 0x7
-#define AR9300_OTP_STATUS_VALID 0x4
-#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
-#define AR9300_OTP_STATUS_SM_BUSY 0x1
-#define AR9300_OTP_READ_DATA 0x15f1c
-
-/*
- * DDR_CTRL block
- */
-#define AR71XX_DDR_REG_PCI_WIN0 0x7c
-#define AR71XX_DDR_REG_PCI_WIN1 0x80
-#define AR71XX_DDR_REG_PCI_WIN2 0x84
-#define AR71XX_DDR_REG_PCI_WIN3 0x88
-#define AR71XX_DDR_REG_PCI_WIN4 0x8c
-#define AR71XX_DDR_REG_PCI_WIN5 0x90
-#define AR71XX_DDR_REG_PCI_WIN6 0x94
-#define AR71XX_DDR_REG_PCI_WIN7 0x98
-#define AR71XX_DDR_REG_FLUSH_GE0 0x9c
-#define AR71XX_DDR_REG_FLUSH_GE1 0xa0
-#define AR71XX_DDR_REG_FLUSH_USB 0xa4
-#define AR71XX_DDR_REG_FLUSH_PCI 0xa8
-
-#define AR724X_DDR_REG_FLUSH_GE0 0x7c
-#define AR724X_DDR_REG_FLUSH_GE1 0x80
-#define AR724X_DDR_REG_FLUSH_USB 0x84
-#define AR724X_DDR_REG_FLUSH_PCIE 0x88
-
-#define AR913X_DDR_REG_FLUSH_GE0 0x7c
-#define AR913X_DDR_REG_FLUSH_GE1 0x80
-#define AR913X_DDR_REG_FLUSH_USB 0x84
-#define AR913X_DDR_REG_FLUSH_WMAC 0x88
-
-#define AR933X_DDR_REG_FLUSH_GE0 0x7c
-#define AR933X_DDR_REG_FLUSH_GE1 0x80
-#define AR933X_DDR_REG_FLUSH_USB 0x84
-#define AR933X_DDR_REG_FLUSH_WMAC 0x88
-
-#define AR934X_DDR_REG_FLUSH_GE0 0x9c
-#define AR934X_DDR_REG_FLUSH_GE1 0xa0
-#define AR934X_DDR_REG_FLUSH_USB 0xa4
-#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
-#define AR934X_DDR_REG_FLUSH_WMAC 0xac
-
-/*
- * PLL block
- */
-#define AR71XX_PLL_REG_CPU_CONFIG 0x00
-#define AR71XX_PLL_REG_SEC_CONFIG 0x04
-#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10
-#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14
-
-#define AR71XX_PLL_DIV_SHIFT 3
-#define AR71XX_PLL_DIV_MASK 0x1f
-#define AR71XX_CPU_DIV_SHIFT 16
-#define AR71XX_CPU_DIV_MASK 0x3
-#define AR71XX_DDR_DIV_SHIFT 18
-#define AR71XX_DDR_DIV_MASK 0x3
-#define AR71XX_AHB_DIV_SHIFT 20
-#define AR71XX_AHB_DIV_MASK 0x7
-
-#define AR71XX_ETH0_PLL_SHIFT 17
-#define AR71XX_ETH1_PLL_SHIFT 19
-
-#define AR724X_PLL_REG_CPU_CONFIG 0x00
-#define AR724X_PLL_REG_PCIE_CONFIG 0x18
-
-#define AR724X_PLL_DIV_SHIFT 0
-#define AR724X_PLL_DIV_MASK 0x3ff
-#define AR724X_PLL_REF_DIV_SHIFT 10
-#define AR724X_PLL_REF_DIV_MASK 0xf
-#define AR724X_AHB_DIV_SHIFT 19
-#define AR724X_AHB_DIV_MASK 0x1
-#define AR724X_DDR_DIV_SHIFT 22
-#define AR724X_DDR_DIV_MASK 0x3
-
-#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-
-#define AR913X_PLL_REG_CPU_CONFIG 0x00
-#define AR913X_PLL_REG_ETH_CONFIG 0x04
-#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18
-
-#define AR913X_PLL_DIV_SHIFT 0
-#define AR913X_PLL_DIV_MASK 0x3ff
-#define AR913X_DDR_DIV_SHIFT 22
-#define AR913X_DDR_DIV_MASK 0x3
-#define AR913X_AHB_DIV_SHIFT 19
-#define AR913X_AHB_DIV_MASK 0x1
-
-#define AR913X_ETH0_PLL_SHIFT 20
-#define AR913X_ETH1_PLL_SHIFT 22
-
-#define AR933X_PLL_CPU_CONFIG_REG 0x00
-#define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10
-#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16
-#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23
-#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-
-#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2)
-#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5
-#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3
-#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10
-#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3
-#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
-#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
-
-#define AR934X_PLL_CPU_CONFIG_REG 0x00
-#define AR934X_PLL_DDR_CONFIG_REG 0x04
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
-#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6
-#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-
-#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10
-#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-#define QCA955X_PLL_CPU_CONFIG_REG 0x00
-#define QCA955X_PLL_DDR_CONFIG_REG 0x04
-#define QCA955X_PLL_CLK_CTRL_REG 0x08
-
-#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6
-#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-
-#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10
-#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-
-#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-/*
- * USB_CONFIG block
- */
-#define AR71XX_USB_CTRL_REG_FLADJ 0x00
-#define AR71XX_USB_CTRL_REG_CONFIG 0x04
-
-/*
- * RESET block
- */
-#define AR71XX_RESET_REG_TIMER 0x00
-#define AR71XX_RESET_REG_TIMER_RELOAD 0x04
-#define AR71XX_RESET_REG_WDOG_CTRL 0x08
-#define AR71XX_RESET_REG_WDOG 0x0c
-#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10
-#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14
-#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18
-#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c
-#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20
-#define AR71XX_RESET_REG_RESET_MODULE 0x24
-#define AR71XX_RESET_REG_PERFC_CTRL 0x2c
-#define AR71XX_RESET_REG_PERFC0 0x30
-#define AR71XX_RESET_REG_PERFC1 0x34
-#define AR71XX_RESET_REG_REV_ID 0x90
-
-#define AR913X_RESET_REG_GLOBAL_INT_STATUS 0x18
-#define AR913X_RESET_REG_RESET_MODULE 0x1c
-#define AR913X_RESET_REG_PERF_CTRL 0x20
-#define AR913X_RESET_REG_PERFC0 0x24
-#define AR913X_RESET_REG_PERFC1 0x28
-
-#define AR724X_RESET_REG_RESET_MODULE 0x1c
-
-#define AR933X_RESET_REG_RESET_MODULE 0x1c
-#define AR933X_RESET_REG_BOOTSTRAP 0xac
-
-#define AR934X_RESET_REG_RESET_MODULE 0x1c
-#define AR934X_RESET_REG_BOOTSTRAP 0xb0
-#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
-#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
-#define MISC_INT_ETHSW BIT(12)
-#define MISC_INT_TIMER4 BIT(10)
-#define MISC_INT_TIMER3 BIT(9)
-#define MISC_INT_TIMER2 BIT(8)
-#define MISC_INT_DMA BIT(7)
-#define MISC_INT_OHCI BIT(6)
-#define MISC_INT_PERFC BIT(5)
-#define MISC_INT_WDOG BIT(4)
-#define MISC_INT_UART BIT(3)
-#define MISC_INT_GPIO BIT(2)
-#define MISC_INT_ERROR BIT(1)
-#define MISC_INT_TIMER BIT(0)
-
-#define AR71XX_RESET_EXTERNAL BIT(28)
-#define AR71XX_RESET_FULL_CHIP BIT(24)
-#define AR71XX_RESET_CPU_NMI BIT(21)
-#define AR71XX_RESET_CPU_COLD BIT(20)
-#define AR71XX_RESET_DMA BIT(19)
-#define AR71XX_RESET_SLIC BIT(18)
-#define AR71XX_RESET_STEREO BIT(17)
-#define AR71XX_RESET_DDR BIT(16)
-#define AR71XX_RESET_GE1_MAC BIT(13)
-#define AR71XX_RESET_GE1_PHY BIT(12)
-#define AR71XX_RESET_USBSUS_OVERRIDE BIT(10)
-#define AR71XX_RESET_GE0_MAC BIT(9)
-#define AR71XX_RESET_GE0_PHY BIT(8)
-#define AR71XX_RESET_USB_OHCI_DLL BIT(6)
-#define AR71XX_RESET_USB_HOST BIT(5)
-#define AR71XX_RESET_USB_PHY BIT(4)
-#define AR71XX_RESET_PCI_BUS BIT(1)
-#define AR71XX_RESET_PCI_CORE BIT(0)
-
-#define AR7240_RESET_USB_HOST BIT(5)
-#define AR7240_RESET_OHCI_DLL BIT(3)
-
-#define AR724X_RESET_GE1_MDIO BIT(23)
-#define AR724X_RESET_GE0_MDIO BIT(22)
-#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10)
-#define AR724X_RESET_PCIE_PHY BIT(7)
-#define AR724X_RESET_PCIE BIT(6)
-#define AR724X_RESET_USB_HOST BIT(5)
-#define AR724X_RESET_USB_PHY BIT(4)
-#define AR724X_RESET_USBSUS_OVERRIDE BIT(3)
-
-#define AR913X_RESET_AMBA2WMAC BIT(22)
-#define AR913X_RESET_USBSUS_OVERRIDE BIT(10)
-#define AR913X_RESET_USB_HOST BIT(5)
-#define AR913X_RESET_USB_PHY BIT(4)
-
-#define AR933X_RESET_GE1_MDIO BIT(23)
-#define AR933X_RESET_GE0_MDIO BIT(22)
-#define AR933X_RESET_GE1_MAC BIT(13)
-#define AR933X_RESET_WMAC BIT(11)
-#define AR933X_RESET_GE0_MAC BIT(9)
-#define AR933X_RESET_USB_HOST BIT(5)
-#define AR933X_RESET_USB_PHY BIT(4)
-#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-#define AR934X_RESET_HOST BIT(31)
-#define AR934X_RESET_SLIC BIT(30)
-#define AR934X_RESET_HDMA BIT(29)
-#define AR934X_RESET_EXTERNAL BIT(28)
-#define AR934X_RESET_RTC BIT(27)
-#define AR934X_RESET_PCIE_EP_INT BIT(26)
-#define AR934X_RESET_CHKSUM_ACC BIT(25)
-#define AR934X_RESET_FULL_CHIP BIT(24)
-#define AR934X_RESET_GE1_MDIO BIT(23)
-#define AR934X_RESET_GE0_MDIO BIT(22)
-#define AR934X_RESET_CPU_NMI BIT(21)
-#define AR934X_RESET_CPU_COLD BIT(20)
-#define AR934X_RESET_HOST_RESET_INT BIT(19)
-#define AR934X_RESET_PCIE_EP BIT(18)
-#define AR934X_RESET_UART1 BIT(17)
-#define AR934X_RESET_DDR BIT(16)
-#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-#define AR934X_RESET_NANDF BIT(14)
-#define AR934X_RESET_GE1_MAC BIT(13)
-#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
-#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-#define AR934X_RESET_HOST_DMA_INT BIT(10)
-#define AR934X_RESET_GE0_MAC BIT(9)
-#define AR934X_RESET_ETH_SWITCH BIT(8)
-#define AR934X_RESET_PCIE_PHY BIT(7)
-#define AR934X_RESET_PCIE BIT(6)
-#define AR934X_RESET_USB_HOST BIT(5)
-#define AR934X_RESET_USB_PHY BIT(4)
-#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-#define AR934X_RESET_LUT BIT(2)
-#define AR934X_RESET_MBOX BIT(1)
-#define AR934X_RESET_I2S BIT(0)
-
-#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
-#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
-#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22)
-#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21)
-#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20)
-#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19)
-#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18)
-#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17)
-#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16)
-#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
-#define AR934X_BOOTSTRAP_PCIE_RC BIT(6)
-#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
-#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
-#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
-#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-#define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
-#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
-#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
-#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
- (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
- AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
-
-#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
- (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC3)
-
-#define QCA955X_EXT_INT_WMAC_MISC BIT(0)
-#define QCA955X_EXT_INT_WMAC_TX BIT(1)
-#define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-#define QCA955X_EXT_INT_WMAC_RXHP BIT(3)
-#define QCA955X_EXT_INT_PCIE_RC1 BIT(4)
-#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5)
-#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6)
-#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7)
-#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8)
-#define QCA955X_EXT_INT_PCIE_RC2 BIT(12)
-#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13)
-#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14)
-#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15)
-#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16)
-#define QCA955X_EXT_INT_USB1 BIT(24)
-#define QCA955X_EXT_INT_USB2 BIT(28)
-
-#define QCA955X_EXT_INT_WMAC_ALL \
- (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
- QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
-
-#define QCA955X_EXT_INT_PCIE_RC1_ALL \
- (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
- QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
- QCA955X_EXT_INT_PCIE_RC1_INT3)
-
-#define QCA955X_EXT_INT_PCIE_RC2_ALL \
- (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
- QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
- QCA955X_EXT_INT_PCIE_RC2_INT3)
-
-#define REV_ID_MAJOR_MASK 0xfff0
-#define REV_ID_MAJOR_AR71XX 0x00a0
-#define REV_ID_MAJOR_AR913X 0x00b0
-#define REV_ID_MAJOR_AR7240 0x00c0
-#define REV_ID_MAJOR_AR7241 0x0100
-#define REV_ID_MAJOR_AR7242 0x1100
-#define REV_ID_MAJOR_AR9330 0x0110
-#define REV_ID_MAJOR_AR9331 0x1110
-#define REV_ID_MAJOR_AR9341 0x0120
-#define REV_ID_MAJOR_AR9342 0x1120
-#define REV_ID_MAJOR_AR9344 0x2120
-#define REV_ID_MAJOR_QCA9558 0x1130
-
-#define AR71XX_REV_ID_MINOR_MASK 0x3
-#define AR71XX_REV_ID_MINOR_AR7130 0x0
-#define AR71XX_REV_ID_MINOR_AR7141 0x1
-#define AR71XX_REV_ID_MINOR_AR7161 0x2
-#define AR71XX_REV_ID_REVISION_MASK 0x3
-#define AR71XX_REV_ID_REVISION_SHIFT 2
-
-#define AR913X_REV_ID_MINOR_MASK 0x3
-#define AR913X_REV_ID_MINOR_AR9130 0x0
-#define AR913X_REV_ID_MINOR_AR9132 0x1
-#define AR913X_REV_ID_REVISION_MASK 0x3
-#define AR913X_REV_ID_REVISION_SHIFT 2
-
-#define AR933X_REV_ID_REVISION_MASK 0x3
-
-#define AR724X_REV_ID_REVISION_MASK 0x3
-
-#define AR934X_REV_ID_REVISION_MASK 0xf
-
-#define AR944X_REV_ID_REVISION_MASK 0xf
-
-/*
- * SPI block
- */
-#define AR71XX_SPI_REG_FS 0x00 /* Function Select */
-#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */
-#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */
-#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */
-
-#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */
-
-#define AR71XX_SPI_CTRL_RD BIT(6) /* Remap Disable */
-#define AR71XX_SPI_CTRL_DIV_MASK 0x3f
-
-#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */
-#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */
-#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n))
-#define AR71XX_SPI_IOC_CS0 AR71XX_SPI_IOC_CS(0)
-#define AR71XX_SPI_IOC_CS1 AR71XX_SPI_IOC_CS(1)
-#define AR71XX_SPI_IOC_CS2 AR71XX_SPI_IOC_CS(2)
-#define AR71XX_SPI_IOC_CS_ALL (AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1 | \
- AR71XX_SPI_IOC_CS2)
-
-/*
- * GPIO block
- */
-#define AR71XX_GPIO_REG_OE 0x00
-#define AR71XX_GPIO_REG_IN 0x04
-#define AR71XX_GPIO_REG_OUT 0x08
-#define AR71XX_GPIO_REG_SET 0x0c
-#define AR71XX_GPIO_REG_CLEAR 0x10
-#define AR71XX_GPIO_REG_INT_MODE 0x14
-#define AR71XX_GPIO_REG_INT_TYPE 0x18
-#define AR71XX_GPIO_REG_INT_POLARITY 0x1c
-#define AR71XX_GPIO_REG_INT_PENDING 0x20
-#define AR71XX_GPIO_REG_INT_ENABLE 0x24
-#define AR71XX_GPIO_REG_FUNC 0x28
-
-#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-#define AR934X_GPIO_REG_OUT_FUNC5 0x40
-#define AR934X_GPIO_REG_FUNC 0x6c
-
-#define AR71XX_GPIO_COUNT 16
-#define AR724X_GPIO_COUNT 18
-#define AR913X_GPIO_COUNT 22
-#define AR933X_GPIO_COUNT 30
-#define AR934X_GPIO_COUNT 23
-#define QCA955X_GPIO_COUNT 24
-
-#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-
-#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-
-#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17)
-#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14)
-#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13)
-
-#define AR934X_GPIO_OUT_GPIO 0x00
-
-/*
- * MII_CTRL block
- */
-#define AR71XX_MII_REG_MII0_CTRL 0x00
-#define AR71XX_MII_REG_MII1_CTRL 0x04
-
-#define AR71XX_MII_CTRL_IF_MASK 3
-#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-#define AR71XX_MII_CTRL_SPEED_MASK 3
-#define AR71XX_MII_CTRL_SPEED_10 0
-#define AR71XX_MII_CTRL_SPEED_100 1
-#define AR71XX_MII_CTRL_SPEED_1000 2
-
-#define AR71XX_MII0_CTRL_IF_GMII 0
-#define AR71XX_MII0_CTRL_IF_MII 1
-#define AR71XX_MII0_CTRL_IF_RGMII 2
-#define AR71XX_MII0_CTRL_IF_RMII 3
-
-#define AR71XX_MII1_CTRL_IF_RGMII 0
-#define AR71XX_MII1_CTRL_IF_RMII 1
-
-/*
- * AR933X GMAC interface
- */
-#define AR933X_GMAC_REG_ETH_CFG 0x00
-
-#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-
-/*
- * AR934X GMAC Interface
- */
-#define AR934X_GMAC_REG_ETH_CFG 0x00
-
-#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-
-/*
- * QCA955X GMAC Interface
- */
-
-#define QCA955X_GMAC_REG_ETH_CFG 0x00
-
-#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0)
-#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6)
-
-#endif /* __ASM_MACH_AR71XX_REGS_H */
+++ /dev/null
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <stddef.h>
-#include "config.h"
-#include "ar71xx_regs.h"
-
-#define READREG(r) *(volatile unsigned int *)(r)
-#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
-
-#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000)
-
-#define UART_BASE 0xb8020000
-
-#define UART_TX 0
-#define UART_LSR 5
-
-#define UART_LSR_THRE 0x20
-
-#define UART_READ(r) READREG(UART_BASE + 4 * (r))
-#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v))
-
-void board_putc(int ch)
-{
- while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
- UART_WRITE(UART_TX, ch);
- while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
-}
-
-#ifdef CONFIG_BOARD_TL_WR1043ND_V1
-static void tlwr1043nd_init(void)
-{
- unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE);
- unsigned int t;
-
- t = READREG(reg + AR913X_RESET_REG_RESET_MODULE);
- t |= AR71XX_RESET_GE0_PHY;
- WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t);
- /* flush write */
- t = READREG(reg + AR913X_RESET_REG_RESET_MODULE);
-}
-#else
-static inline void tlwr1043nd_init(void) {}
-#endif
-
-void board_init(void)
-{
- tlwr1043nd_init();
-}
+++ /dev/null
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * The cache manipulation routine has been taken from the U-Boot project.
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "cache.h"
-#include "cacheops.h"
-#include "config.h"
-
-#define cache_op(op,addr) \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set noreorder \n" \
- " .set mips3\n\t \n" \
- " cache %0, %1 \n" \
- " .set pop \n" \
- : \
- : "i" (op), "R" (*(unsigned char *)(addr)))
-
-void flush_cache(unsigned long start_addr, unsigned long size)
-{
- unsigned long lsize = CONFIG_CACHELINE_SIZE;
- unsigned long addr = start_addr & ~(lsize - 1);
- unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
-
- while (1) {
- cache_op(Hit_Writeback_Inv_D, addr);
- cache_op(Hit_Invalidate_I, addr);
- if (addr == aend)
- break;
- addr += lsize;
- }
-}
+++ /dev/null
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef __CACHE_H
-#define __CACHE_H
-
-void flush_cache(unsigned long start_addr, unsigned long size);
-
-#endif /* __CACHE_H */
+++ /dev/null
-/*
- * Cache operations for the cache instruction.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
- * (C) Copyright 1999 Silicon Graphics, Inc.
- */
-#ifndef __ASM_CACHEOPS_H
-#define __ASM_CACHEOPS_H
-
-/*
- * Cache Operations available on all MIPS processors with R4000-style caches
- */
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-#define Index_Load_Tag_I 0x04
-#define Index_Load_Tag_D 0x05
-#define Index_Store_Tag_I 0x08
-#define Index_Store_Tag_D 0x09
-#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I 0x00
-#else
-#define Hit_Invalidate_I 0x10
-#endif
-#define Hit_Invalidate_D 0x11
-#define Hit_Writeback_Inv_D 0x15
-
-/*
- * R4000-specific cacheops
- */
-#define Create_Dirty_Excl_D 0x0d
-#define Fill 0x14
-#define Hit_Writeback_I 0x18
-#define Hit_Writeback_D 0x19
-
-/*
- * R4000SC and R4400SC-specific cacheops
- */
-#define Index_Invalidate_SI 0x02
-#define Index_Writeback_Inv_SD 0x03
-#define Index_Load_Tag_SI 0x06
-#define Index_Load_Tag_SD 0x07
-#define Index_Store_Tag_SI 0x0A
-#define Index_Store_Tag_SD 0x0B
-#define Create_Dirty_Excl_SD 0x0f
-#define Hit_Invalidate_SI 0x12
-#define Hit_Invalidate_SD 0x13
-#define Hit_Writeback_Inv_SD 0x17
-#define Hit_Writeback_SD 0x1b
-#define Hit_Set_Virtual_SI 0x1e
-#define Hit_Set_Virtual_SD 0x1f
-
-/*
- * R5000-specific cacheops
- */
-#define R5K_Page_Invalidate_S 0x17
-
-/*
- * RM7000-specific cacheops
- */
-#define Page_Invalidate_T 0x16
-
-/*
- * R10000-specific cacheops
- *
- * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
- * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
- */
-#define Index_Writeback_Inv_S 0x03
-#define Index_Load_Tag_S 0x07
-#define Index_Store_Tag_S 0x0B
-#define Hit_Invalidate_S 0x13
-#define Cache_Barrier 0x14
-#define Hit_Writeback_Inv_S 0x17
-#define Index_Load_Data_I 0x18
-#define Index_Load_Data_D 0x19
-#define Index_Load_Data_S 0x1b
-#define Index_Store_Data_I 0x1c
-#define Index_Store_Data_D 0x1d
-#define Index_Store_Data_S 0x1f
-
-#endif /* __ASM_CACHEOPS_H */
+++ /dev/null
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _CONFIG_H_
-#define _CONFIG_H_
-
-#define CONFIG_ICACHE_SIZE (32 * 1024)
-#define CONFIG_DCACHE_SIZE (64 * 1024)
-#define CONFIG_CACHELINE_SIZE 32
-
-#ifndef CONFIG_FLASH_OFFS
-#define CONFIG_FLASH_OFFS 0
-#endif
-
-#ifndef CONFIG_FLASH_MAX
-#define CONFIG_FLASH_MAX 0
-#endif
-
-#ifndef CONFIG_FLASH_STEP
-#define CONFIG_FLASH_STEP 0x1000
-#endif
-
-#endif /* _CONFIG_H_ */
+++ /dev/null
-/*
- * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
- *
- * Copyright (C) 2001, Monta Vista Software
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#ifndef _cp0regdef_h_
-#define _cp0regdef_h_
-
-#define CP0_INDEX $0
-#define CP0_RANDOM $1
-#define CP0_ENTRYLO0 $2
-#define CP0_ENTRYLO1 $3
-#define CP0_CONTEXT $4
-#define CP0_PAGEMASK $5
-#define CP0_WIRED $6
-#define CP0_BADVADDR $8
-#define CP0_COUNT $9
-#define CP0_ENTRYHI $10
-#define CP0_COMPARE $11
-#define CP0_STATUS $12
-#define CP0_CAUSE $13
-#define CP0_EPC $14
-#define CP0_PRID $15
-#define CP0_CONFIG $16
-#define CP0_LLADDR $17
-#define CP0_WATCHLO $18
-#define CP0_WATCHHI $19
-#define CP0_XCONTEXT $20
-#define CP0_FRAMEMASK $21
-#define CP0_DIAGNOSTIC $22
-#define CP0_PERFORMANCE $25
-#define CP0_ECC $26
-#define CP0_CACHEERR $27
-#define CP0_TAGLO $28
-#define CP0_TAGHI $29
-#define CP0_ERROREPC $30
-
-#endif
+++ /dev/null
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Some parts of this code was based on the OpenWrt specific lzma-loader
- * for the BCM47xx and ADM5120 based boards:
- * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include "cp0regdef.h"
-#include "cacheops.h"
-#include "config.h"
-
-#define KSEG0 0x80000000
-
- .macro ehb
- sll zero, 3
- .endm
-
- .text
-
-LEAF(startup)
- .set noreorder
- .set mips32
-
- mtc0 zero, CP0_WATCHLO # clear watch registers
- mtc0 zero, CP0_WATCHHI
- mtc0 zero, CP0_CAUSE # clear before writing status register
-
- mfc0 t0, CP0_STATUS
- li t1, 0x1000001f
- or t0, t1
- xori t0, 0x1f
- mtc0 t0, CP0_STATUS
- ehb
-
- mtc0 zero, CP0_COUNT
- mtc0 zero, CP0_COMPARE
- ehb
-
- la t0, __reloc_label # get linked address of label
- bal __reloc_label # branch and link to label to
- nop # get actual address
-__reloc_label:
- subu t0, ra, t0 # get reloc_delta
-
- beqz t0, __reloc_done # if delta is 0 we are in the right place
- nop
-
- /* Copy our code to the right place */
- la t1, _code_start # get linked address of _code_start
- la t2, _code_end # get linked address of _code_end
- addu t0, t0, t1 # calculate actual address of _code_start
-
-__reloc_copy:
- lw t3, 0(t0)
- sw t3, 0(t1)
- add t1, 4
- blt t1, t2, __reloc_copy
- add t0, 4
-
- /* flush cache */
- la t0, _code_start
- la t1, _code_end
-
- li t2, ~(CONFIG_CACHELINE_SIZE - 1)
- and t0, t2
- and t1, t2
- li t2, CONFIG_CACHELINE_SIZE
-
- b __flush_check
- nop
-
-__flush_line:
- cache Hit_Writeback_Inv_D, 0(t0)
- cache Hit_Invalidate_I, 0(t0)
- add t0, t2
-
-__flush_check:
- bne t0, t1, __flush_line
- nop
-
- sync
-
-__reloc_done:
-
- /* clear bss */
- la t0, _bss_start
- la t1, _bss_end
- b __bss_check
- nop
-
-__bss_fill:
- sw zero, 0(t0)
- addi t0, 4
-
-__bss_check:
- bne t0, t1, __bss_fill
- nop
-
- /* Setup new "C" stack */
- la sp, _stack
-
- /* reserve stack space for a0-a3 registers */
- subu sp, 16
-
- /* jump to the decompressor routine */
- la t0, loader_main
- jr t0
- nop
-
- .set reorder
-END(startup)
+++ /dev/null
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Some parts of this code was based on the OpenWrt specific lzma-loader
- * for the BCM47xx and ADM5120 based boards:
- * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
- * Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * The image_header structure has been taken from the U-Boot project.
- * (C) Copyright 2008 Semihalf
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include "config.h"
-#include "cache.h"
-#include "printf.h"
-#include "LzmaDecode.h"
-
-#define AR71XX_FLASH_START 0x1f000000
-#define AR71XX_FLASH_END 0x1fe00000
-
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-
-#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#undef LZMA_DEBUG
-
-#ifdef LZMA_DEBUG
-# define DBG(f, a...) printf(f, ## a)
-#else
-# define DBG(f, a...) do {} while (0)
-#endif
-
-#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */
-
-#define IH_NMLEN 32 /* Image Name Length */
-
-typedef struct image_header {
- uint32_t ih_magic; /* Image Header Magic Number */
- uint32_t ih_hcrc; /* Image Header CRC Checksum */
- uint32_t ih_time; /* Image Creation Timestamp */
- uint32_t ih_size; /* Image Data Size */
- uint32_t ih_load; /* Data Load Address */
- uint32_t ih_ep; /* Entry Point Address */
- uint32_t ih_dcrc; /* Image Data CRC Checksum */
- uint8_t ih_os; /* Operating System */
- uint8_t ih_arch; /* CPU architecture */
- uint8_t ih_type; /* Image Type */
- uint8_t ih_comp; /* Compression Type */
- uint8_t ih_name[IH_NMLEN]; /* Image Name */
-} image_header_t;
-
-/* beyond the image end, size not known in advance */
-extern unsigned char workspace[];
-extern void board_init(void);
-
-static CLzmaDecoderState lzma_state;
-static unsigned char *lzma_data;
-static unsigned long lzma_datasize;
-static unsigned long lzma_outsize;
-static unsigned long kernel_la;
-
-#ifdef CONFIG_KERNEL_CMDLINE
-#define kernel_argc 2
-static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE;
-static const char *kernel_argv[] = {
- NULL,
- kernel_cmdline,
- NULL,
-};
-#endif /* CONFIG_KERNEL_CMDLINE */
-
-static void halt(void)
-{
- printf("\nSystem halted!\n");
- for(;;);
-}
-
-static __inline__ unsigned long get_be32(void *buf)
-{
- unsigned char *p = buf;
-
- return (((unsigned long) p[0] << 24) +
- ((unsigned long) p[1] << 16) +
- ((unsigned long) p[2] << 8) +
- (unsigned long) p[3]);
-}
-
-static __inline__ unsigned char lzma_get_byte(void)
-{
- unsigned char c;
-
- lzma_datasize--;
- c = *lzma_data++;
-
- return c;
-}
-
-static int lzma_init_props(void)
-{
- unsigned char props[LZMA_PROPERTIES_SIZE];
- int res;
- int i;
-
- /* read lzma properties */
- for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
- props[i] = lzma_get_byte();
-
- /* read the lower half of uncompressed size in the header */
- lzma_outsize = ((SizeT) lzma_get_byte()) +
- ((SizeT) lzma_get_byte() << 8) +
- ((SizeT) lzma_get_byte() << 16) +
- ((SizeT) lzma_get_byte() << 24);
-
- /* skip rest of the header (upper half of uncompressed size) */
- for (i = 0; i < 4; i++)
- lzma_get_byte();
-
- res = LzmaDecodeProperties(&lzma_state.Properties, props,
- LZMA_PROPERTIES_SIZE);
- return res;
-}
-
-static int lzma_decompress(unsigned char *outStream)
-{
- SizeT ip, op;
- int ret;
-
- lzma_state.Probs = (CProb *) workspace;
-
- ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
- lzma_outsize, &op);
-
- if (ret != LZMA_RESULT_OK) {
- int i;
-
- DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
- ret, lzma_data + ip, lzma_outsize, ip, op);
-
- for (i = 0; i < 16; i++)
- DBG("%02x ", lzma_data[ip + i]);
-
- DBG("\n");
- }
-
- return ret;
-}
-
-#if (LZMA_WRAPPER)
-static void lzma_init_data(void)
-{
- extern unsigned char _lzma_data_start[];
- extern unsigned char _lzma_data_end[];
-
- kernel_la = LOADADDR;
- lzma_data = _lzma_data_start;
- lzma_datasize = _lzma_data_end - _lzma_data_start;
-}
-#else
-static void lzma_init_data(void)
-{
- struct image_header *hdr = NULL;
- unsigned char *flash_base;
- unsigned long flash_ofs;
- unsigned long kernel_ofs;
- unsigned long kernel_size;
-
- flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START);
-
- printf("Looking for OpenWrt image... ");
-
- for (flash_ofs = CONFIG_FLASH_OFFS;
- flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX);
- flash_ofs += CONFIG_FLASH_STEP) {
- unsigned long magic;
- unsigned char *p;
-
- p = flash_base + flash_ofs;
- magic = get_be32(p);
- if (magic == IH_MAGIC_OKLI) {
- hdr = (struct image_header *) p;
- break;
- }
- }
-
- if (hdr == NULL) {
- printf("not found!\n");
- halt();
- }
-
- printf("found at 0x%08x\n", flash_base + flash_ofs);
-
- kernel_ofs = sizeof(struct image_header);
- kernel_size = get_be32(&hdr->ih_size);
- kernel_la = get_be32(&hdr->ih_load);
-
- lzma_data = flash_base + flash_ofs + kernel_ofs;
- lzma_datasize = kernel_size;
-}
-#endif /* (LZMA_WRAPPER) */
-
-void loader_main(unsigned long reg_a0, unsigned long reg_a1,
- unsigned long reg_a2, unsigned long reg_a3)
-{
- void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
- unsigned long);
- int res;
-
- board_init();
-
- printf("\n\nOpenWrt kernel loader for AR7XXX/AR9XXX\n");
- printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
-
- lzma_init_data();
-
- res = lzma_init_props();
- if (res != LZMA_RESULT_OK) {
- printf("Incorrect LZMA stream properties!\n");
- halt();
- }
-
- printf("Decompressing kernel... ");
-
- res = lzma_decompress((unsigned char *) kernel_la);
- if (res != LZMA_RESULT_OK) {
- printf("failed, ");
- switch (res) {
- case LZMA_RESULT_DATA_ERROR:
- printf("data error!\n");
- break;
- default:
- printf("unknown error %d!\n", res);
- }
- halt();
- } else {
- printf("done!\n");
- }
-
- flush_cache(kernel_la, lzma_outsize);
-
- printf("Starting kernel at %08x...\n\n", kernel_la);
-
-#ifdef CONFIG_KERNEL_CMDLINE
- reg_a0 = kernel_argc;
- reg_a1 = (unsigned long) kernel_argv;
- reg_a2 = 0;
- reg_a3 = 0;
-#endif
-
- kernel_entry = (void *) kernel_la;
- kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
-}
+++ /dev/null
-OUTPUT_ARCH(mips)
-SECTIONS {
- .text : {
- _code_start = .;
- *(.text)
- *(.text.*)
- *(.rodata)
- *(.rodata.*)
- *(.data.lzma)
- }
-
- . = ALIGN(32);
- .data : {
- *(.data)
- *(.data.*)
- . = . + 524288; /* workaround for buggy bootloaders */
- }
-
- . = ALIGN(32);
- _code_end = .;
-
- _bss_start = .;
- .bss : {
- *(.bss)
- *(.bss.*)
- }
-
- . = ALIGN(32);
- _bss_end = .;
-
- . = . + 8192;
- _stack = .;
-
- workspace = .;
-}
+++ /dev/null
-OUTPUT_ARCH(mips)
-SECTIONS {
- .text : {
- startup = .;
- *(.text)
- *(.text.*)
- *(.data)
- *(.data.*)
- }
-}
+++ /dev/null
-OUTPUT_ARCH(mips)
-SECTIONS {
- .data.lzma : {
- _lzma_data_start = .;
- *(.data)
- _lzma_data_end = .;
- }
-}
+++ /dev/null
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include "printf.h"
-
-extern void board_putc(int ch);
-
-/* this is the maximum width for a variable */
-#define LP_MAX_BUF 256
-
-/* macros */
-#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') )
-#define Ctod(x) ( (x) - '0')
-
-/* forward declaration */
-static int PrintChar(char *, char, int, int);
-static int PrintString(char *, char *, int, int);
-static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
-
-/* private variable */
-static const char theFatalMsg[] = "fatal error in lp_Print!";
-
-/* -*-
- * A low level printf() function.
- */
-static void
-lp_Print(void (*output)(void *, char *, int),
- void * arg,
- char *fmt,
- va_list ap)
-{
-
-#define OUTPUT(arg, s, l) \
- { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
- (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
- } else { \
- (*output)(arg, s, l); \
- } \
- }
-
- char buf[LP_MAX_BUF];
-
- char c;
- char *s;
- long int num;
-
- int longFlag;
- int negFlag;
- int width;
- int prec;
- int ladjust;
- char padc;
-
- int length;
-
- for(;;) {
- {
- /* scan for the next '%' */
- char *fmtStart = fmt;
- while ( (*fmt != '\0') && (*fmt != '%')) {
- fmt ++;
- }
-
- /* flush the string found so far */
- OUTPUT(arg, fmtStart, fmt-fmtStart);
-
- /* are we hitting the end? */
- if (*fmt == '\0') break;
- }
-
- /* we found a '%' */
- fmt ++;
-
- /* check for long */
- if (*fmt == 'l') {
- longFlag = 1;
- fmt ++;
- } else {
- longFlag = 0;
- }
-
- /* check for other prefixes */
- width = 0;
- prec = -1;
- ladjust = 0;
- padc = ' ';
-
- if (*fmt == '-') {
- ladjust = 1;
- fmt ++;
- }
-
- if (*fmt == '0') {
- padc = '0';
- fmt++;
- }
-
- if (IsDigit(*fmt)) {
- while (IsDigit(*fmt)) {
- width = 10 * width + Ctod(*fmt++);
- }
- }
-
- if (*fmt == '.') {
- fmt ++;
- if (IsDigit(*fmt)) {
- prec = 0;
- while (IsDigit(*fmt)) {
- prec = prec*10 + Ctod(*fmt++);
- }
- }
- }
-
-
- /* check format flag */
- negFlag = 0;
- switch (*fmt) {
- case 'b':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'd':
- case 'D':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- if (num < 0) {
- num = - num;
- negFlag = 1;
- }
- length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'o':
- case 'O':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'u':
- case 'U':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'x':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'X':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
- OUTPUT(arg, buf, length);
- break;
-
- case 'c':
- c = (char)va_arg(ap, int);
- length = PrintChar(buf, c, width, ladjust);
- OUTPUT(arg, buf, length);
- break;
-
- case 's':
- s = (char*)va_arg(ap, char *);
- length = PrintString(buf, s, width, ladjust);
- OUTPUT(arg, buf, length);
- break;
-
- case '\0':
- fmt --;
- break;
-
- default:
- /* output this char as it is */
- OUTPUT(arg, fmt, 1);
- } /* switch (*fmt) */
-
- fmt ++;
- } /* for(;;) */
-
- /* special termination call */
- OUTPUT(arg, "\0", 1);
-}
-
-
-/* --------------- local help functions --------------------- */
-static int
-PrintChar(char * buf, char c, int length, int ladjust)
-{
- int i;
-
- if (length < 1) length = 1;
- if (ladjust) {
- *buf = c;
- for (i=1; i< length; i++) buf[i] = ' ';
- } else {
- for (i=0; i< length-1; i++) buf[i] = ' ';
- buf[length - 1] = c;
- }
- return length;
-}
-
-static int
-PrintString(char * buf, char* s, int length, int ladjust)
-{
- int i;
- int len=0;
- char* s1 = s;
- while (*s1++) len++;
- if (length < len) length = len;
-
- if (ladjust) {
- for (i=0; i< len; i++) buf[i] = s[i];
- for (i=len; i< length; i++) buf[i] = ' ';
- } else {
- for (i=0; i< length-len; i++) buf[i] = ' ';
- for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
- }
- return length;
-}
-
-static int
-PrintNum(char * buf, unsigned long u, int base, int negFlag,
- int length, int ladjust, char padc, int upcase)
-{
- /* algorithm :
- * 1. prints the number from left to right in reverse form.
- * 2. fill the remaining spaces with padc if length is longer than
- * the actual length
- * TRICKY : if left adjusted, no "0" padding.
- * if negtive, insert "0" padding between "0" and number.
- * 3. if (!ladjust) we reverse the whole string including paddings
- * 4. otherwise we only reverse the actual string representing the num.
- */
-
- int actualLength =0;
- char *p = buf;
- int i;
-
- do {
- int tmp = u %base;
- if (tmp <= 9) {
- *p++ = '0' + tmp;
- } else if (upcase) {
- *p++ = 'A' + tmp - 10;
- } else {
- *p++ = 'a' + tmp - 10;
- }
- u /= base;
- } while (u != 0);
-
- if (negFlag) {
- *p++ = '-';
- }
-
- /* figure out actual length and adjust the maximum length */
- actualLength = p - buf;
- if (length < actualLength) length = actualLength;
-
- /* add padding */
- if (ladjust) {
- padc = ' ';
- }
- if (negFlag && !ladjust && (padc == '0')) {
- for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
- buf[length -1] = '-';
- } else {
- for (i = actualLength; i< length; i++) buf[i] = padc;
- }
-
-
- /* prepare to reverse the string */
- {
- int begin = 0;
- int end;
- if (ladjust) {
- end = actualLength - 1;
- } else {
- end = length -1;
- }
-
- while (end > begin) {
- char tmp = buf[begin];
- buf[begin] = buf[end];
- buf[end] = tmp;
- begin ++;
- end --;
- }
- }
-
- /* adjust the string pointer */
- return length;
-}
-
-static void printf_output(void *arg, char *s, int l)
-{
- int i;
-
- // special termination call
- if ((l==1) && (s[0] == '\0')) return;
-
- for (i=0; i< l; i++) {
- board_putc(s[i]);
- if (s[i] == '\n') board_putc('\r');
- }
-}
-
-void printf(char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
- lp_Print(printf_output, 0, fmt, ap);
- va_end(ap);
-}
+++ /dev/null
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _printf_h_
-#define _printf_h_
-
-#include <stdarg.h>
-void printf(char *fmt, ...);
-
-#endif /* _printf_h_ */
+++ /dev/null
-DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME
-
-# combine kernel and rootfs into one image
-# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
-# <type> is "sysupgrade" or "factory"
-#
-# -a align the rootfs start on an <align> bytes boundary
-# -j add jffs2 end-of-filesystem markers
-# -s strip padding from end of the image
-# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
-define Build/mktplinkfw
- -$(STAGING_DIR_HOST)/bin/mktplinkfw \
- -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
- -m $(TPLINK_HEADER_VERSION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@.new \
- -j -X 0x40000 \
- -a $(call rootfs_align,$(FILESYSTEM)) \
- $(wordlist 2,$(words $(1)),$(1)) \
- $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
-endef
-
-# mktplinkfw-combined
-#
-# -c combined image
-define Build/mktplinkfw-combined
- $(STAGING_DIR_HOST)/bin/mktplinkfw \
- -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \
- -m $(TPLINK_HEADER_VERSION) \
- -k $@ \
- -o $@.new \
- -s -S \
- -c
- @mv $@.new $@
-endef
-
-# add RE450 and similar header to the kernel image
-define Build/mktplinkfw-kernel
- $(STAGING_DIR_HOST)/bin/mktplinkfw-kernel \
- -H $(TPLINK_HWID) -N OpenWrt -V $(REVISION) \
- -L $(KERNEL_LOADADDR) -E $(KERNEL_LOADADDR) \
- -k $@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-define Build/uImageArcher
- mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
- @mv $@.new $@
-endef
-
-
-define Device/tplink
- TPLINK_HWREV := 0x1
- TPLINK_HEADER_VERSION := 1
- LOADER_TYPE := gz
- KERNEL := kernel-bin | patch-cmdline | lzma
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined
-# IMAGES := sysupgrade.bin
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
-# IMAGE/factory.bin := append-rootfs | mktplinkfw factory | a
-endef
-
-define Device/tplink-nolzma
-$(Device/tplink)
- LOADER_FLASH_OFFS := 0x22000
- COMPILE := loader-$(1).gz
- COMPILE/loader-$(1).gz := loader-okli-compile
- #KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
- KERNEL:= kernel-bin | append-dtb | lzma |uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
- KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-combined
-endef
-
-define Device/tplink-4m
-$(Device/tplink-nolzma)
- TPLINK_FLASHLAYOUT := 4M
- IMAGE_SIZE := 3904k
-endef
-
-define Device/tplink-8m
-$(Device/tplink-nolzma)
- TPLINK_FLASHLAYOUT := 8M
- IMAGE_SIZE := 7936k
-endef
-
-define Device/tplink-4mlzma
-$(Device/tplink)
- TPLINK_FLASHLAYOUT := 4Mlzma
- IMAGE_SIZE := 3904k
-endef
-
-define Device/tplink-8mlzma
-$(Device/tplink)
- TPLINK_FLASHLAYOUT := 8Mlzma
- IMAGE_SIZE := 7936k
-endef
-
-define Device/tplink-16mlzma
-$(Device/tplink)
- TPLINK_FLASHLAYOUT := 16Mlzma
- IMAGE_SIZE := 15872k
-endef
-
-define Device/tl_wr1043nd_v1
- $(Device/tplink-8m)
- ATH_SOC := ar9132
- DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR1043ND
- DEVICE_PROFILE := TLWR1043
- TPLINK_HWID := 0x10430001
-endef
-
-#TARGET_DEVICES += tl_wr1043nd_v1
+++ /dev/null
-LEDS_MENU:=LED modules
-
-define KernelPackage/leds-reset
- SUBMENU:=$(LEDS_MENU)
- TITLE:=reset controller LED support
- DEPENDS:= @TARGET_ath79
- KCONFIG:=CONFIG_LEDS_RESET=m
- FILES:=$(LINUX_DIR)/drivers/leds/leds-reset.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-reset,1)
-endef
-
-define KernelPackage/leds-reset/description
- Kernel module for LEDs on reset lines
-endef
-
-$(eval $(call KernelPackage,leds-reset))
+++ /dev/null
-From 58812f6d0f1e11b03ed266038ed3b7274ab6f121 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:26:32 +0100
-Subject: [PATCH 01/27] tty: serial: drop QCA pecific SoC symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/tty/serial/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1463,7 +1463,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
-
- config SERIAL_AR933X
- tristate "AR933X serial port support"
-- depends on HAVE_CLK && SOC_AR933X
-+ depends on HAVE_CLK && ATH79
- select SERIAL_CORE
- help
- If you have an Atheros AR933X SOC based board and want to use the
+++ /dev/null
-From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 5 Mar 2018 11:41:25 +0100
-Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout,
-then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/watchdog/ath79_wdt.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
-
- static int ath79_wdt_set_timeout(int val)
- {
-- if (val < 1 || val > max_timeout)
-+ if (val < 1)
- return -EINVAL;
-
-- timeout = val;
-+ if (val > max_timeout)
-+ timeout = max_timeout;
-+ else
-+ timeout = val;
-+
- ath79_wdt_keepalive();
-
- return 0;
+++ /dev/null
-From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:03:03 +0100
-Subject: [PATCH 03/27] leds: add reset-controller based driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/leds/Kconfig | 11 ++++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 149 insertions(+)
- create mode 100644 drivers/leds/leds-reset.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -696,6 +696,17 @@ config LEDS_NIC78BX
- To compile this driver as a module, choose M here: the module
- will be called leds-nic78bx.
-
-+config LEDS_RESET
-+ tristate "LED support for reset-controller API"
-+ depends on LEDS_CLASS
-+ depends on RESET_CONTROLLER
-+ help
-+ This option enables support for LEDs connected to pins driven by reset
-+ controllers. Yes, DNI actual built HW like that.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called leds-reset.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- /dev/null
-+++ b/drivers/leds/leds-reset.c
-@@ -0,0 +1,137 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/err.h>
-+#include <linux/reset.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct reset_led_data {
-+ struct led_classdev cdev;
-+ struct reset_control *rst;
-+};
-+
-+static inline struct reset_led_data *
-+ cdev_to_reset_led_data(struct led_classdev *led_cdev)
-+{
-+ return container_of(led_cdev, struct reset_led_data, cdev);
-+}
-+
-+static void reset_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
-+
-+ if (value == LED_OFF)
-+ reset_control_assert(led_dat->rst);
-+ else
-+ reset_control_deassert(led_dat->rst);
-+}
-+
-+struct reset_leds_priv {
-+ int num_leds;
-+ struct reset_led_data leds[];
-+};
-+
-+static inline int sizeof_reset_leds_priv(int num_leds)
-+{
-+ return sizeof(struct reset_leds_priv) +
-+ (sizeof(struct reset_led_data) * num_leds);
-+}
-+
-+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fwnode_handle *child;
-+ struct reset_leds_priv *priv;
-+ int count, ret;
-+
-+ count = device_get_child_node_count(dev);
-+ if (!count)
-+ return ERR_PTR(-ENODEV);
-+
-+ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
-+ if (!priv)
-+ return ERR_PTR(-ENOMEM);
-+
-+ device_for_each_child_node(dev, child) {
-+ struct reset_led_data *led = &priv->leds[priv->num_leds];
-+ struct device_node *np = to_of_node(child);
-+
-+ ret = fwnode_property_read_string(child, "label", &led->cdev.name);
-+ if (!led->cdev.name) {
-+ fwnode_handle_put(child);
-+ return ERR_PTR(-EINVAL);
-+ }
-+ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0);
-+ if (IS_ERR(led->rst))
-+ return ERR_PTR(-EINVAL);
-+
-+ led->cdev.brightness_set = reset_led_set;
-+ ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev);
-+ if (ret < 0)
-+ return ERR_PTR(ret);
-+ led->cdev.dev->of_node = np;
-+ priv->num_leds++;
-+ }
-+
-+ return priv;
-+}
-+
-+static const struct of_device_id of_reset_leds_match[] = {
-+ { .compatible = "reset-leds", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_reset_leds_match);
-+
-+static int reset_led_probe(struct platform_device *pdev)
-+{
-+ struct reset_leds_priv *priv;
-+
-+ priv = reset_leds_create(pdev);
-+ if (IS_ERR(priv))
-+ return PTR_ERR(priv);
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ return 0;
-+}
-+
-+static void reset_led_shutdown(struct platform_device *pdev)
-+{
-+ struct reset_leds_priv *priv = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_leds; i++) {
-+ struct reset_led_data *led = &priv->leds[i];
-+
-+ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
-+ reset_led_set(&led->cdev, LED_OFF);
-+ }
-+}
-+
-+static struct platform_driver reset_led_driver = {
-+ .probe = reset_led_probe,
-+ .shutdown = reset_led_shutdown,
-+ .driver = {
-+ .name = "leds-reset",
-+ .of_match_table = of_reset_leds_match,
-+ },
-+};
-+
-+module_platform_driver(reset_led_driver);
-+
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_DESCRIPTION("reset controller LED driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:leds-reset");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -73,6 +73,7 @@ obj-$(CONFIG_LEDS_PM8058) += leds-pm805
- obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
- obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
- obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
-+obj-$(CONFIG_LEDS_RESET) += leds-reset.o
-
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
+++ /dev/null
-From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:05 +0100
-Subject: [PATCH 04/27] phy: add ath79 usb phys
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/Kconfig | 16 ++++++
- drivers/phy/Makefile | 2 +
- drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
- drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 250 insertions(+)
- create mode 100644 drivers/phy/phy-ar7100-usb.c
- create mode 100644 drivers/phy/phy-ar7200-usb.c
-
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -15,6 +15,22 @@ config GENERIC_PHY
- phy users can obtain reference to the PHY. All the users of this
- framework should select this config.
-
-+config PHY_AR7100_USB
-+ tristate "Atheros AR7100 USB PHY driver"
-+ depends on ATH79 || COMPILE_TEST
-+ default y if USB_EHCI_HCD_PLATFORM
-+ select PHY_SIMPLE
-+ help
-+ Enable this to support the USB PHY on Atheros AR7100 SoCs.
-+
-+config PHY_AR7200_USB
-+ tristate "Atheros AR7200 USB PHY driver"
-+ depends on ATH79 || COMPILE_TEST
-+ default y if USB_EHCI_HCD_PLATFORM
-+ select PHY_SIMPLE
-+ help
-+ Enable this to support the USB PHY on Atheros AR7200 SoCs.
-+
- config PHY_LPC18XX_USB_OTG
- tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
- depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,8 @@
- #
-
- obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-+obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o
-+obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
- obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
- obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-ar7100-usb.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/delay.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+struct ar7100_usb_phy {
-+ struct reset_control *rst_phy;
-+ struct reset_control *rst_host;
-+ struct reset_control *rst_ohci_dll;
-+ void __iomem *io_base;
-+ struct phy *phy;
-+ int gpio;
-+};
-+
-+static int ar7100_usb_phy_power_off(struct phy *phy)
-+{
-+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ err |= reset_control_assert(priv->rst_host);
-+ err |= reset_control_assert(priv->rst_phy);
-+ err |= reset_control_assert(priv->rst_ohci_dll);
-+
-+ return err;
-+}
-+
-+static int ar7100_usb_phy_power_on(struct phy *phy)
-+{
-+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ err |= ar7100_usb_phy_power_off(phy);
-+ mdelay(100);
-+ err |= reset_control_deassert(priv->rst_ohci_dll);
-+ err |= reset_control_deassert(priv->rst_phy);
-+ err |= reset_control_deassert(priv->rst_host);
-+ mdelay(500);
-+ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
-+ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ar7100_usb_phy_ops = {
-+ .power_on = ar7100_usb_phy_power_on,
-+ .power_off = ar7100_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int ar7100_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *phy_provider;
-+ struct resource *res;
-+ struct ar7100_usb_phy *priv;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ priv->io_base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(priv->io_base))
-+ return PTR_ERR(priv->io_base);
-+
-+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+ if (IS_ERR(priv->rst_phy)) {
-+ dev_err(&pdev->dev, "phy reset is missing\n");
-+ return PTR_ERR(priv->rst_phy);
-+ }
-+
-+ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
-+ if (IS_ERR(priv->rst_host)) {
-+ dev_err(&pdev->dev, "host reset is missing\n");
-+ return PTR_ERR(priv->rst_host);
-+ }
-+
-+ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
-+ if (IS_ERR(priv->rst_ohci_dll)) {
-+ dev_err(&pdev->dev, "ohci-dll reset is missing\n");
-+ return PTR_ERR(priv->rst_host);
-+ }
-+
-+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
-+ if (IS_ERR(priv->phy)) {
-+ dev_err(&pdev->dev, "failed to create PHY\n");
-+ return PTR_ERR(priv->phy);
-+ }
-+
-+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+ if (priv->gpio >= 0) {
-+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio\n");
-+ return ret;
-+ }
-+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+ gpio_set_value(priv->gpio, 1);
-+ }
-+
-+ phy_set_drvdata(priv->phy, priv);
-+
-+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7100_usb_phy_of_match[] = {
-+ { .compatible = "qca,ar7100-usb-phy" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
-+
-+static struct platform_driver ar7100_usb_phy_driver = {
-+ .probe = ar7100_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ar7100_usb_phy_of_match,
-+ .name = "ar7100-usb-phy",
-+ }
-+};
-+module_platform_driver(ar7100_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/phy/phy-ar7200-usb.c
-@@ -0,0 +1,123 @@
-+/*
-+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+struct ar7200_usb_phy {
-+ struct reset_control *rst_phy;
-+ struct reset_control *suspend_override;
-+ struct phy *phy;
-+ int gpio;
-+};
-+
-+static int ar7200_usb_phy_power_on(struct phy *phy)
-+{
-+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ if (priv->rst_phy)
-+ err = reset_control_deassert(priv->rst_phy);
-+ if (!err && priv->suspend_override)
-+ err = reset_control_assert(priv->suspend_override);
-+ if (err && priv->rst_phy)
-+ err = reset_control_assert(priv->rst_phy);
-+
-+ return err;
-+}
-+
-+static int ar7200_usb_phy_power_off(struct phy *phy)
-+{
-+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ if (priv->suspend_override)
-+ err = reset_control_deassert(priv->suspend_override);
-+ if (priv->rst_phy)
-+ err |= reset_control_assert(priv->rst_phy);
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ar7200_usb_phy_ops = {
-+ .power_on = ar7200_usb_phy_power_on,
-+ .power_off = ar7200_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int ar7200_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *phy_provider;
-+ struct ar7200_usb_phy *priv;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+ if (IS_ERR(priv->rst_phy)) {
-+ dev_err(&pdev->dev, "phy reset is missing\n");
-+ return PTR_ERR(priv->rst_phy);
-+ }
-+
-+ priv->suspend_override = devm_reset_control_get_optional(
-+ &pdev->dev, "usb-suspend-override");
-+ if (IS_ERR(priv->suspend_override)) {
-+ if (PTR_ERR(priv->suspend_override) == -ENOENT)
-+ priv->suspend_override = NULL;
-+ else
-+ return PTR_ERR(priv->suspend_override);
-+ }
-+
-+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
-+ if (IS_ERR(priv->phy)) {
-+ dev_err(&pdev->dev, "failed to create PHY\n");
-+ return PTR_ERR(priv->phy);
-+ }
-+
-+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+ if (priv->gpio >= 0) {
-+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio\n");
-+ return ret;
-+ }
-+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+ gpio_set_value(priv->gpio, 1);
-+ }
-+
-+ phy_set_drvdata(priv->phy, priv);
-+
-+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7200_usb_phy_of_match[] = {
-+ { .compatible = "qca,ar7200-usb-phy" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
-+
-+static struct platform_driver ar7200_usb_phy_driver = {
-+ .probe = ar7200_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ar7200_usb_phy_of_match,
-+ .name = "ar7200-usb-phy",
-+ }
-+};
-+module_platform_driver(ar7200_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:01:43 +0100
-Subject: [PATCH 05/27] usb: add more OF/quirk properties
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/ehci-platform.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -187,6 +187,11 @@ static int ehci_platform_probe(struct pl
- ehci = hcd_to_ehci(hcd);
-
- if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
-+
-+ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
-+ pdata->has_synopsys_hc_bug = 1;
-+
- if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
- ehci->big_endian_mmio = 1;
-
+++ /dev/null
-From bd17da5b6297e0e52b787049292d076ad415362a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:54 +0100
-Subject: [PATCH 06/27] usb: drop deprecated symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/Kconfig | 25 -------------------------
- 1 file changed, 25 deletions(-)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -297,19 +297,6 @@ config USB_CNS3XXX_EHCI
- It is needed for high-speed (480Mbit/sec) USB 2.0 device
- support.
-
--config USB_EHCI_ATH79
-- bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
-- depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
-- select USB_EHCI_ROOT_HUB_TT
-- select USB_EHCI_HCD_PLATFORM
-- default y
-- ---help---
-- This option is deprecated now and the driver was removed, use
-- USB_EHCI_HCD_PLATFORM instead.
--
-- Enables support for the built-in EHCI controller present
-- on the Atheros AR7XXX/AR9XXX SoCs.
--
- config USB_EHCI_HCD_PLATFORM
- tristate "Generic EHCI driver for a platform device"
- default n
-@@ -493,18 +480,6 @@ config USB_OHCI_HCD_DAVINCI
- controller. This driver cannot currently be a loadable
- module because it lacks a proper PHY abstraction.
-
--config USB_OHCI_ATH79
-- bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
-- depends on (SOC_AR71XX || SOC_AR724X)
-- select USB_OHCI_HCD_PLATFORM
-- default y
-- help
-- This option is deprecated now and the driver was removed, use
-- USB_OHCI_HCD_PLATFORM instead.
--
-- Enables support for the built-in OHCI controller present on the
-- Atheros AR71XX/AR7240 SoCs.
--
- config USB_OHCI_HCD_PPC_OF_BE
- bool "OHCI support for OF platform bus (big endian)"
- depends on PPC
+++ /dev/null
-From cb376159800b9b44be76949c3aee89eb06d29faa Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:55:13 +0100
-Subject: [PATCH 07/27] irqchip/irq-ath79-intc: add irq cascade driver for
- QCA9556 SoCs
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/Makefile | 1 +
- drivers/irqchip/irq-ath79-intc.c | 104 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 105 insertions(+)
- create mode 100644 drivers/irqchip/irq-ath79-intc.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
-
- obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o
- obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
-+obj-$(CONFIG_ATH79) += irq-ath79-intc.o
- obj-$(CONFIG_ATH79) += irq-ath79-misc.o
- obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
---- /dev/null
-+++ b/drivers/irqchip/irq-ath79-intc.c
-@@ -0,0 +1,104 @@
-+/*
-+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
-+ *
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#define ATH79_MAX_INTC_CASCADE 3
-+
-+struct ath79_intc {
-+ struct irq_chip chip;
-+ u32 irq;
-+ u32 pending_mask;
-+ u32 irq_mask[ATH79_MAX_INTC_CASCADE];
-+};
-+
-+static void ath79_intc_irq_handler(struct irq_desc *desc)
-+{
-+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+ struct ath79_intc *intc = domain->host_data;
-+ u32 pending;
-+
-+ pending = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-+ pending &= intc->pending_mask;
-+
-+ if (pending) {
-+ int i;
-+
-+ for (i = 0; i < domain->hwirq_max; i++)
-+ if (pending & intc->irq_mask[i])
-+ generic_handle_irq(irq_find_mapping(domain, i));
-+ } else {
-+ spurious_interrupt();
-+ }
-+}
-+
-+static void ath79_intc_irq_unmask(struct irq_data *d)
-+{
-+}
-+
-+static void ath79_intc_irq_mask(struct irq_data *d)
-+{
-+}
-+
-+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ath79_intc *intc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ath79_irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ath79_intc_map,
-+};
-+
-+static int __init qca9556_intc_of_init(
-+ struct device_node *node, struct device_node *parent)
-+{
-+ struct irq_domain *domain;
-+ struct ath79_intc *intc;
-+ int cnt, i;
-+
-+ cnt = of_property_count_u32_elems(node, "qcom,pending-bits");
-+ if (cnt > ATH79_MAX_INTC_CASCADE)
-+ panic("Too many INTC pending bits\n");
-+
-+ intc = kzalloc(sizeof(*intc), GFP_KERNEL);
-+ if (!intc)
-+ panic("Failed to allocate INTC memory\n");
-+ intc->chip.name = "INTC";
-+ intc->chip.irq_unmask = ath79_intc_irq_unmask,
-+ intc->chip.irq_mask = ath79_intc_irq_mask,
-+
-+ of_property_read_u32_array(node, "qcom,pending-bits", intc->irq_mask, cnt);
-+ for (i = 0; i < cnt; i++)
-+ intc->pending_mask |= intc->irq_mask[i];
-+
-+ intc->irq = irq_of_parse_and_map(node, 0);
-+ if (!intc->irq)
-+ panic("Failed to get INTC IRQ");
-+
-+ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
-+ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
-+
-+ return 0;
-+}
-+IRQCHIP_DECLARE(qca9556_intc, "qcom,qca9556-intc",
-+ qca9556_intc_of_init);
+++ /dev/null
-From f711421eb5f6f790f1ebc09a13ae4aed8ba5f67b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/27] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
-- irq_wb_chan[2] = irq_wb_chan2;
-- irq_wb_chan[3] = irq_wb_chan3;
-- mips_cpu_irq_init();
--}
+++ /dev/null
-From 3ea2bff4ed3ce74dc4303aa20f5e906e78352f6b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:06:10 +0100
-Subject: [PATCH 09/27] MIPS: ath79: add lots of missing registers
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 773 ++++++++++++++++++++++++-
- 1 file changed, 771 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -20,6 +20,10 @@
- #include <linux/bitops.h>
-
- #define AR71XX_APB_BASE 0x18000000
-+#define AR71XX_GE0_BASE 0x19000000
-+#define AR71XX_GE0_SIZE 0x10000
-+#define AR71XX_GE1_BASE 0x1a000000
-+#define AR71XX_GE1_SIZE 0x10000
- #define AR71XX_EHCI_BASE 0x1b000000
- #define AR71XX_EHCI_SIZE 0x1000
- #define AR71XX_OHCI_BASE 0x1c000000
-@@ -39,6 +43,8 @@
- #define AR71XX_PLL_SIZE 0x100
- #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE 0x100
-+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR71XX_MII_SIZE 0x100
-
- #define AR71XX_PCI_MEM_BASE 0x10000000
- #define AR71XX_PCI_MEM_SIZE 0x07000000
-@@ -81,18 +87,39 @@
-
- #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR933X_UART_SIZE 0x14
-+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR933X_GMAC_SIZE 0x04
- #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR933X_WMAC_SIZE 0x20000
- #define AR933X_EHCI_BASE 0x1b000000
- #define AR933X_EHCI_SIZE 0x1000
-
-+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR934X_GMAC_SIZE 0x14
- #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE 0x20000
- #define AR934X_EHCI_BASE 0x1b000000
- #define AR934X_EHCI_SIZE 0x200
-+#define AR934X_NFC_BASE 0x1b000200
-+#define AR934X_NFC_SIZE 0xb8
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA953X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA953X_GMAC_SIZE 0x14
-+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA953X_WMAC_SIZE 0x20000
-+#define QCA953X_EHCI_BASE 0x1b000000
-+#define QCA953X_EHCI_SIZE 0x200
-+#define QCA953X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
-+#define QCA953X_SRIF_SIZE 0x1000
-+
-+#define QCA953X_PCI_CFG_BASE0 0x14000000
-+#define QCA953X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
-+#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
-+#define QCA953X_PCI_MEM_BASE0 0x10000000
-+#define QCA953X_PCI_MEM_SIZE 0x02000000
-+
- #define QCA955X_PCI_MEM_BASE0 0x10000000
- #define QCA955X_PCI_MEM_BASE1 0x12000000
- #define QCA955X_PCI_MEM_SIZE 0x02000000
-@@ -106,11 +133,72 @@
- #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
- #define QCA955X_PCI_CTRL_SIZE 0x100
-
-+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA955X_GMAC_SIZE 0x40
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-+#define QCA955X_NFC_BASE 0x1b800200
-+#define QCA955X_NFC_SIZE 0xb8
-+
-+#define QCA956X_PCI_MEM_BASE1 0x12000000
-+#define QCA956X_PCI_MEM_SIZE 0x02000000
-+#define QCA956X_PCI_CFG_BASE1 0x16000000
-+#define QCA956X_PCI_CFG_SIZE 0x1000
-+#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
-+#define QCA956X_PCI_CRP_SIZE 0x1000
-+#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
-+#define QCA956X_PCI_CTRL_SIZE 0x100
-+
-+#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA956X_WMAC_SIZE 0x20000
-+#define QCA956X_EHCI0_BASE 0x1b000000
-+#define QCA956X_EHCI1_BASE 0x1b400000
-+#define QCA956X_EHCI_SIZE 0x200
-+#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SGMII_SIZE 0x64
-+#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
-+#define QCA956X_PLL_SIZE 0x50
-+#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SIZE 0x64
-+
-+/*
-+ * Hidden Registers
-+ */
-+#define QCA956X_MAC_CFG_BASE 0xb9000000
-+#define QCA956X_MAC_CFG_SIZE 0x64
-+
-+#define QCA956X_MAC_CFG1_REG 0x00
-+#define QCA956X_MAC_CFG1_SOFT_RST BIT(31)
-+#define QCA956X_MAC_CFG1_RX_RST BIT(19)
-+#define QCA956X_MAC_CFG1_TX_RST BIT(18)
-+#define QCA956X_MAC_CFG1_LOOPBACK BIT(8)
-+#define QCA956X_MAC_CFG1_RX_EN BIT(2)
-+#define QCA956X_MAC_CFG1_TX_EN BIT(0)
-+
-+#define QCA956X_MAC_CFG2_REG 0x04
-+#define QCA956X_MAC_CFG2_IF_1000 BIT(9)
-+#define QCA956X_MAC_CFG2_IF_10_100 BIT(8)
-+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN BIT(5)
-+#define QCA956X_MAC_CFG2_LEN_CHECK BIT(4)
-+#define QCA956X_MAC_CFG2_PAD_CRC_EN BIT(2)
-+#define QCA956X_MAC_CFG2_FDX BIT(0)
-+
-+#define QCA956X_MAC_MII_MGMT_CFG_REG 0x20
-+#define QCA956X_MGMT_CFG_CLK_DIV_20 0x07
-+
-+#define QCA956X_MAC_FIFO_CFG0_REG 0x48
-+#define QCA956X_MAC_FIFO_CFG1_REG 0x4c
-+#define QCA956X_MAC_FIFO_CFG2_REG 0x50
-+#define QCA956X_MAC_FIFO_CFG3_REG 0x54
-+#define QCA956X_MAC_FIFO_CFG4_REG 0x58
-+#define QCA956X_MAC_FIFO_CFG5_REG 0x5c
-+
-+#define QCA956X_DAM_RESET_OFFSET 0xb90001bc
-+#define QCA956X_DAM_RESET_SIZE 0x4
-+#define QCA956X_INLINE_CHKSUM_ENG BIT(27)
-
- /*
- * DDR_CTRL block
-@@ -149,6 +237,12 @@
- #define AR934X_DDR_REG_FLUSH_PCIE 0xa8
- #define AR934X_DDR_REG_FLUSH_WMAC 0xac
-
-+#define QCA953X_DDR_REG_FLUSH_GE0 0x9c
-+#define QCA953X_DDR_REG_FLUSH_GE1 0xa0
-+#define QCA953X_DDR_REG_FLUSH_USB 0xa4
-+#define QCA953X_DDR_REG_FLUSH_PCIE 0xa8
-+#define QCA953X_DDR_REG_FLUSH_WMAC 0xac
-+
- /*
- * PLL block
- */
-@@ -166,8 +260,14 @@
- #define AR71XX_AHB_DIV_SHIFT 20
- #define AR71XX_AHB_DIV_MASK 0x7
-
-+#define AR71XX_ETH0_PLL_SHIFT 17
-+#define AR71XX_ETH1_PLL_SHIFT 19
-+
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
--#define AR724X_PLL_REG_PCIE_CONFIG 0x18
-+#define AR724X_PLL_REG_PCIE_CONFIG 0x10
-+
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16)
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25)
-
- #define AR724X_PLL_FB_SHIFT 0
- #define AR724X_PLL_FB_MASK 0x3ff
-@@ -178,6 +278,8 @@
- #define AR724X_DDR_DIV_SHIFT 22
- #define AR724X_DDR_DIV_MASK 0x3
-
-+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-+
- #define AR913X_PLL_REG_CPU_CONFIG 0x00
- #define AR913X_PLL_REG_ETH_CONFIG 0x04
- #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-@@ -190,6 +292,9 @@
- #define AR913X_AHB_DIV_SHIFT 19
- #define AR913X_AHB_DIV_MASK 0x1
-
-+#define AR913X_ETH0_PLL_SHIFT 20
-+#define AR913X_ETH1_PLL_SHIFT 22
-+
- #define AR933X_PLL_CPU_CONFIG_REG 0x00
- #define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-@@ -211,6 +316,8 @@
- #define AR934X_PLL_CPU_CONFIG_REG 0x00
- #define AR934X_PLL_DDR_CONFIG_REG 0x04
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
- #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -243,9 +350,52 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+
-+#define QCA953X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA953X_PLL_DDR_CONFIG_REG 0x04
-+#define QCA953X_PLL_CLK_CTRL_REG 0x08
-+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c
-+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6
-+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10
-+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
-+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
-
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -278,6 +428,81 @@
- #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
-+
-+#define QCA956X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA956X_PLL_CPU_CONFIG1_REG 0x04
-+#define QCA956X_PLL_DDR_CONFIG_REG 0x08
-+#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
-+#define QCA956X_PLL_CLK_CTRL_REG 0x10
-+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG 0x28
-+#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30
-+#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c
-+
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff
-+
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff
-+
-+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20)
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
-+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK 0xf
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP BIT(12)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2 BIT(13)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1 BIT(14)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2 BIT(15)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE BIT(16)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE BIT(17)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL BIT(18)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL BIT(19)
-+
-+#define QCA956X_PLL_ETH_XMII_TX_INVERT BIT(1)
-+#define QCA956X_PLL_ETH_XMII_GIGE BIT(25)
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT 28
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK 0x3
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT 26
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK 3
-+
-+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
-+
- /*
- * USB_CONFIG block
- */
-@@ -317,10 +542,19 @@
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-+#define QCA953X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-+
- #define QCA955X_RESET_REG_RESET_MODULE 0x1c
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
-+#define QCA956X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA956X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac
-+
-+#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28)
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
- #define MISC_INT_TIMER3 BIT(9)
-@@ -370,16 +604,123 @@
- #define AR913X_RESET_USB_HOST BIT(5)
- #define AR913X_RESET_USB_PHY BIT(4)
-
-+#define AR933X_RESET_GE1_MDIO BIT(23)
-+#define AR933X_RESET_GE0_MDIO BIT(22)
-+#define AR933X_RESET_GE1_MAC BIT(13)
- #define AR933X_RESET_WMAC BIT(11)
-+#define AR933X_RESET_GE0_MAC BIT(9)
- #define AR933X_RESET_USB_HOST BIT(5)
- #define AR933X_RESET_USB_PHY BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-+#define AR934X_RESET_HOST BIT(31)
-+#define AR934X_RESET_SLIC BIT(30)
-+#define AR934X_RESET_HDMA BIT(29)
-+#define AR934X_RESET_EXTERNAL BIT(28)
-+#define AR934X_RESET_RTC BIT(27)
-+#define AR934X_RESET_PCIE_EP_INT BIT(26)
-+#define AR934X_RESET_CHKSUM_ACC BIT(25)
-+#define AR934X_RESET_FULL_CHIP BIT(24)
-+#define AR934X_RESET_GE1_MDIO BIT(23)
-+#define AR934X_RESET_GE0_MDIO BIT(22)
-+#define AR934X_RESET_CPU_NMI BIT(21)
-+#define AR934X_RESET_CPU_COLD BIT(20)
-+#define AR934X_RESET_HOST_RESET_INT BIT(19)
-+#define AR934X_RESET_PCIE_EP BIT(18)
-+#define AR934X_RESET_UART1 BIT(17)
-+#define AR934X_RESET_DDR BIT(16)
-+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define AR934X_RESET_NANDF BIT(14)
-+#define AR934X_RESET_GE1_MAC BIT(13)
-+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
- #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-+#define AR934X_RESET_HOST_DMA_INT BIT(10)
-+#define AR934X_RESET_GE0_MAC BIT(9)
-+#define AR934X_RESET_ETH_SWITCH BIT(8)
-+#define AR934X_RESET_PCIE_PHY BIT(7)
-+#define AR934X_RESET_PCIE BIT(6)
- #define AR934X_RESET_USB_HOST BIT(5)
- #define AR934X_RESET_USB_PHY BIT(4)
- #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define AR934X_RESET_LUT BIT(2)
-+#define AR934X_RESET_MBOX BIT(1)
-+#define AR934X_RESET_I2S BIT(0)
-+
-+#define QCA953X_RESET_USB_EXT_PWR BIT(29)
-+#define QCA953X_RESET_EXTERNAL BIT(28)
-+#define QCA953X_RESET_RTC BIT(27)
-+#define QCA953X_RESET_FULL_CHIP BIT(24)
-+#define QCA953X_RESET_GE1_MDIO BIT(23)
-+#define QCA953X_RESET_GE0_MDIO BIT(22)
-+#define QCA953X_RESET_CPU_NMI BIT(21)
-+#define QCA953X_RESET_CPU_COLD BIT(20)
-+#define QCA953X_RESET_DDR BIT(16)
-+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA953X_RESET_GE1_MAC BIT(13)
-+#define QCA953X_RESET_ETH_SWITCH_ANALOG BIT(12)
-+#define QCA953X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA953X_RESET_GE0_MAC BIT(9)
-+#define QCA953X_RESET_ETH_SWITCH BIT(8)
-+#define QCA953X_RESET_PCIE_PHY BIT(7)
-+#define QCA953X_RESET_PCIE BIT(6)
-+#define QCA953X_RESET_USB_HOST BIT(5)
-+#define QCA953X_RESET_USB_PHY BIT(4)
-+#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3)
-+
-+#define QCA955X_RESET_HOST BIT(31)
-+#define QCA955X_RESET_SLIC BIT(30)
-+#define QCA955X_RESET_HDMA BIT(29)
-+#define QCA955X_RESET_EXTERNAL BIT(28)
-+#define QCA955X_RESET_RTC BIT(27)
-+#define QCA955X_RESET_PCIE_EP_INT BIT(26)
-+#define QCA955X_RESET_CHKSUM_ACC BIT(25)
-+#define QCA955X_RESET_FULL_CHIP BIT(24)
-+#define QCA955X_RESET_GE1_MDIO BIT(23)
-+#define QCA955X_RESET_GE0_MDIO BIT(22)
-+#define QCA955X_RESET_CPU_NMI BIT(21)
-+#define QCA955X_RESET_CPU_COLD BIT(20)
-+#define QCA955X_RESET_HOST_RESET_INT BIT(19)
-+#define QCA955X_RESET_PCIE_EP BIT(18)
-+#define QCA955X_RESET_UART1 BIT(17)
-+#define QCA955X_RESET_DDR BIT(16)
-+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA955X_RESET_NANDF BIT(14)
-+#define QCA955X_RESET_GE1_MAC BIT(13)
-+#define QCA955X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA955X_RESET_HOST_DMA_INT BIT(10)
-+#define QCA955X_RESET_GE0_MAC BIT(9)
-+#define QCA955X_RESET_SGMII BIT(8)
-+#define QCA955X_RESET_PCIE_PHY BIT(7)
-+#define QCA955X_RESET_PCIE BIT(6)
-+#define QCA955X_RESET_USB_HOST BIT(5)
-+#define QCA955X_RESET_USB_PHY BIT(4)
-+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA955X_RESET_LUT BIT(2)
-+#define QCA955X_RESET_MBOX BIT(1)
-+#define QCA955X_RESET_I2S BIT(0)
-+
-+#define QCA956X_RESET_EXTERNAL BIT(28)
-+#define QCA956X_RESET_FULL_CHIP BIT(24)
-+#define QCA956X_RESET_GE1_MDIO BIT(23)
-+#define QCA956X_RESET_GE0_MDIO BIT(22)
-+#define QCA956X_RESET_CPU_NMI BIT(21)
-+#define QCA956X_RESET_CPU_COLD BIT(20)
-+#define QCA956X_RESET_DMA BIT(19)
-+#define QCA956X_RESET_DDR BIT(16)
-+#define QCA956X_RESET_GE1_MAC BIT(13)
-+#define QCA956X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA956X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA956X_RESET_GE0_MAC BIT(9)
-+#define QCA956X_RESET_SGMII BIT(8)
-+#define QCA956X_RESET_USB_HOST BIT(5)
-+#define QCA956X_RESET_USB_PHY BIT(4)
-+#define QCA956X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA956X_RESET_SWITCH_ANALOG BIT(2)
-+#define QCA956X_RESET_SWITCH BIT(0)
-
-+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -398,8 +739,17 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-+#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12)
-+#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11)
-+#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5)
-+#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4)
-+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-+#define QCA953X_BOOTSTRAP_DDR1 BIT(0)
-+
- #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
-+#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-@@ -418,6 +768,24 @@
- AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC3)
-
-+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_TX BIT(1)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC BIT(4)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
-+ (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
-+ QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
-+
-+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
-+ (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
-+ QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
-+ QCA953X_PCIE_WMAC_INT_PCIE_RC3)
-+
- #define QCA955X_EXT_INT_WMAC_MISC BIT(0)
- #define QCA955X_EXT_INT_WMAC_TX BIT(1)
- #define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-@@ -449,6 +817,37 @@
- QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
- QCA955X_EXT_INT_PCIE_RC2_INT3)
-
-+#define QCA956X_EXT_INT_WMAC_MISC BIT(0)
-+#define QCA956X_EXT_INT_WMAC_TX BIT(1)
-+#define QCA956X_EXT_INT_WMAC_RXLP BIT(2)
-+#define QCA956X_EXT_INT_WMAC_RXHP BIT(3)
-+#define QCA956X_EXT_INT_PCIE_RC1 BIT(4)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8)
-+#define QCA956X_EXT_INT_PCIE_RC2 BIT(12)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16)
-+#define QCA956X_EXT_INT_USB1 BIT(24)
-+#define QCA956X_EXT_INT_USB2 BIT(28)
-+
-+#define QCA956X_EXT_INT_WMAC_ALL \
-+ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
-+ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
-+
-+#define QCA956X_EXT_INT_PCIE_RC1_ALL \
-+ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
-+ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
-+ QCA956X_EXT_INT_PCIE_RC1_INT3)
-+
-+#define QCA956X_EXT_INT_PCIE_RC2_ALL \
-+ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
-+ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
-+ QCA956X_EXT_INT_PCIE_RC2_INT3)
-+
- #define REV_ID_MAJOR_MASK 0xfff0
- #define REV_ID_MAJOR_AR71XX 0x00a0
- #define REV_ID_MAJOR_AR913X 0x00b0
-@@ -460,8 +859,12 @@
- #define REV_ID_MAJOR_AR9341 0x0120
- #define REV_ID_MAJOR_AR9342 0x1120
- #define REV_ID_MAJOR_AR9344 0x2120
-+#define REV_ID_MAJOR_QCA9533 0x0140
-+#define REV_ID_MAJOR_QCA9533_V2 0x0160
- #define REV_ID_MAJOR_QCA9556 0x0130
- #define REV_ID_MAJOR_QCA9558 0x1130
-+#define REV_ID_MAJOR_TP9343 0x0150
-+#define REV_ID_MAJOR_QCA956X 0x1150
-
- #define AR71XX_REV_ID_MINOR_MASK 0x3
- #define AR71XX_REV_ID_MINOR_AR7130 0x0
-@@ -482,8 +885,12 @@
-
- #define AR934X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA953X_REV_ID_REVISION_MASK 0xf
-+
- #define QCA955X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA956X_REV_ID_REVISION_MASK 0xf
-+
- /*
- * SPI block
- */
-@@ -521,15 +928,63 @@
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-
-+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-+#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-+#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-+#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-+#define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
-+#define QCA953X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA953X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA953X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA953X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA953X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA953X_GPIO_REG_IN_ENABLE0 0x44
-+#define QCA953X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS1 10
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS2 11
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS0 9
-+#define QCA953X_GPIO_OUT_MUX_SPI_CLK 8
-+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI 12
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK1 41
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK2 42
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK3 43
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK4 44
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK5 45
-+
-+#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA955X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA955X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA955X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA955X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA955X_GPIO_REG_OUT_FUNC5 0x40
-+#define QCA955X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA956X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA956X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA956X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA956X_GPIO_REG_OUT_FUNC5 0x40
-+#define QCA956X_GPIO_REG_IN_ENABLE0 0x44
-+#define QCA956X_GPIO_REG_IN_ENABLE3 0x50
-+#define QCA956X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33
-+
- #define AR71XX_GPIO_COUNT 16
- #define AR7240_GPIO_COUNT 18
- #define AR7241_GPIO_COUNT 20
- #define AR913X_GPIO_COUNT 22
- #define AR933X_GPIO_COUNT 30
- #define AR934X_GPIO_COUNT 23
-+#define QCA953X_GPIO_COUNT 18
- #define QCA955X_GPIO_COUNT 24
-+#define QCA956X_GPIO_COUNT 23
-
- /*
- * SRIF block
-@@ -552,4 +1007,318 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define QCA953X_SRIF_CPU_DPLL1_REG 0x1c0
-+#define QCA953X_SRIF_CPU_DPLL2_REG 0x1c4
-+#define QCA953X_SRIF_CPU_DPLL3_REG 0x1c8
-+
-+#define QCA953X_SRIF_DDR_DPLL1_REG 0x240
-+#define QCA953X_SRIF_DDR_DPLL2_REG 0x244
-+#define QCA953X_SRIF_DDR_DPLL3_REG 0x248
-+
-+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT 27
-+#define QCA953X_SRIF_DPLL1_REFDIV_MASK 0x1f
-+#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18
-+#define QCA953X_SRIF_DPLL1_NINT_MASK 0x1ff
-+#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
-+
-+#define QCA953X_SRIF_DPLL2_LOCAL_PLL BIT(30)
-+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13
-+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7
-+
-+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-+#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-+
-+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-+#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-+#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-+
-+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-+#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2)
-+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define AR934X_GPIO_OUT_GPIO 0
-+#define AR934X_GPIO_OUT_SPI_CS1 7
-+#define AR934X_GPIO_OUT_LED_LINK0 41
-+#define AR934X_GPIO_OUT_LED_LINK1 42
-+#define AR934X_GPIO_OUT_LED_LINK2 43
-+#define AR934X_GPIO_OUT_LED_LINK3 44
-+#define AR934X_GPIO_OUT_LED_LINK4 45
-+#define AR934X_GPIO_OUT_EXT_LNA0 46
-+#define AR934X_GPIO_OUT_EXT_LNA1 47
-+
-+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define QCA955X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define QCA955X_GPIO_OUT_GPIO 0
-+#define QCA955X_MII_EXT_MDI 1
-+#define QCA955X_SLIC_DATA_OUT 3
-+#define QCA955X_SLIC_PCM_FS 4
-+#define QCA955X_SLIC_PCM_CLK 5
-+#define QCA955X_SPI_CLK 8
-+#define QCA955X_SPI_CS_0 9
-+#define QCA955X_SPI_CS_1 10
-+#define QCA955X_SPI_CS_2 11
-+#define QCA955X_SPI_MISO 12
-+#define QCA955X_I2S_CLK 13
-+#define QCA955X_I2S_WS 14
-+#define QCA955X_I2S_SD 15
-+#define QCA955X_I2S_MCK 16
-+#define QCA955X_SPDIF_OUT 17
-+#define QCA955X_UART1_TD 18
-+#define QCA955X_UART1_RTS 19
-+#define QCA955X_UART1_RD 20
-+#define QCA955X_UART1_CTS 21
-+#define QCA955X_UART0_SOUT 22
-+#define QCA955X_SPDIF2_OUT 23
-+#define QCA955X_LED_SGMII_SPEED0 24
-+#define QCA955X_LED_SGMII_SPEED1 25
-+#define QCA955X_LED_SGMII_DUPLEX 26
-+#define QCA955X_LED_SGMII_LINK_UP 27
-+#define QCA955X_SGMII_SPEED0_INVERT 28
-+#define QCA955X_SGMII_SPEED1_INVERT 29
-+#define QCA955X_SGMII_DUPLEX_INVERT 30
-+#define QCA955X_SGMII_LINK_UP_INVERT 31
-+#define QCA955X_GE1_MII_MDO 32
-+#define QCA955X_GE1_MII_MDC 33
-+#define QCA955X_SWCOM2 38
-+#define QCA955X_SWCOM3 39
-+#define QCA955X_MAC2_GPIO 40
-+#define QCA955X_MAC3_GPIO 41
-+#define QCA955X_ATT_LED 42
-+#define QCA955X_PWR_LED 43
-+#define QCA955X_TX_FRAME 44
-+#define QCA955X_RX_CLEAR_EXTERNAL 45
-+#define QCA955X_LED_NETWORK_EN 46
-+#define QCA955X_LED_POWER_EN 47
-+#define QCA955X_WMAC_GLUE_WOW 68
-+#define QCA955X_RX_CLEAR_EXTENSION 70
-+#define QCA955X_CP_NAND_CS1 73
-+#define QCA955X_USB_SUSPEND 74
-+#define QCA955X_ETH_TX_ERR 75
-+#define QCA955X_DDR_DQ_OE 76
-+#define QCA955X_CLKREQ_N_EP 77
-+#define QCA955X_CLKREQ_N_RC 78
-+#define QCA955X_CLK_OBS0 79
-+#define QCA955X_CLK_OBS1 80
-+#define QCA955X_CLK_OBS2 81
-+#define QCA955X_CLK_OBS3 82
-+#define QCA955X_CLK_OBS4 83
-+#define QCA955X_CLK_OBS5 84
-+
-+/*
-+ * MII_CTRL block
-+ */
-+#define AR71XX_MII_REG_MII0_CTRL 0x00
-+#define AR71XX_MII_REG_MII1_CTRL 0x04
-+
-+#define AR71XX_MII_CTRL_IF_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-+#define AR71XX_MII_CTRL_SPEED_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_10 0
-+#define AR71XX_MII_CTRL_SPEED_100 1
-+#define AR71XX_MII_CTRL_SPEED_1000 2
-+
-+#define AR71XX_MII0_CTRL_IF_GMII 0
-+#define AR71XX_MII0_CTRL_IF_MII 1
-+#define AR71XX_MII0_CTRL_IF_RGMII 2
-+#define AR71XX_MII0_CTRL_IF_RMII 3
-+
-+#define AR71XX_MII1_CTRL_IF_RGMII 0
-+#define AR71XX_MII1_CTRL_IF_RMII 1
-+
-+/*
-+ * AR933X GMAC interface
-+ */
-+#define AR933X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-+#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-+#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-+#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-+
-+/*
-+ * AR934X GMAC Interface
-+ */
-+#define AR934X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define AR934X_ETH_CFG_RXD_DELAY BIT(14)
-+#define AR934X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define AR934X_ETH_CFG_RDV_DELAY BIT(16)
-+#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-+
-+/*
-+ * QCA953X GMAC Interface
-+ */
-+#define QCA953X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA953X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define QCA953X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define QCA953X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+
-+/*
-+ * QCA955X GMAC Interface
-+ */
-+
-+#define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-+
-+#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-+#define QCA955X_ETH_CFG_GMII_GE0 BIT(2)
-+#define QCA955X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define QCA955X_ETH_CFG_GE0_ERR_EN BIT(5)
-+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
-+#define QCA955X_ETH_CFG_RMII_GE0 BIT(10)
-+#define QCA955X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define QCA955X_ETH_CFG_RMII_GE0_MASTER BIT(12)
-+#define QCA955X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define QCA955X_ETH_CFG_RDV_DELAY BIT(16)
-+#define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16
-+#define QCA955X_ETH_CFG_TXD_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT 18
-+#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-+
-+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+/*
-+ * QCA956X GMAC Interface
-+ */
-+
-+#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+#define QCA956X_GMAC_REG_SGMII_RESET 0x14
-+#define QCA956X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA956X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34
-+#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58
-+
-+#define QCA956X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA956X_ETH_CFG_GE0_SGMII BIT(6)
-+#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7)
-+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
-+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9)
-+#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10)
-+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define QCA956X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define QCA956X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT 16
-+
-+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET 0x0
-+#define QCA956X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA956X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA956X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA956X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA956X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
-+#define QCA956X_SGMII_SERDES_CDR_BW_MASK 0x3
-+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT 1
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK 0x7
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT 4
-+#define QCA956X_SGMII_SERDES_PLL_BW BIT(8)
-+#define QCA956X_SGMII_SERDES_VCO_FAST BIT(9)
-+#define QCA956X_SGMII_SERDES_VCO_SLOW BIT(10)
-+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
-+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT BIT(16)
-+#define QCA956X_SGMII_SERDES_FIBER_SDO BIT(17)
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT 27
-+#define QCA956X_SGMII_SERDES_VCO_REG_MASK 0xf
-+
-+#define QCA956X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+#define QCA956X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
+++ /dev/null
-From f3d5027255ef0752ed12b65c3bf7eb363fc3c096 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:00:55 +0100
-Subject: [PATCH 10/27] MIPS: ath79: select the PINCTRL subsystem
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -191,6 +191,7 @@ config ATH79
- select CSRC_R4K
- select DMA_NONCOHERENT
- select GPIOLIB
-+ select PINCTRL
- select HAVE_CLK
- select COMMON_CLK
- select CLKDEV_LOOKUP
+++ /dev/null
-From 54204ef3edbb1aa2390cabba61fe185a12cc39f0 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 08:35:44 +0100
-Subject: [PATCH 11/27] MIPS: ath79: fix register address in
- ath79_ddr_wb_flush()
-
-ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets
-need to be a multiple of 4.
-
-Cc: Alban Bedel <albeu@free.fr>
-Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/ath79/common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
-
- void ath79_ddr_wb_flush(u32 reg)
- {
-- void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg;
-+ void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4);
-
- /* Flush the DDR write buffer. */
- __raw_writel(0x1, flush_reg);
+++ /dev/null
-From ac3a5ee699f3baa7654c93a3ffda46be82443344 Mon Sep 17 00:00:00 2001
-From: Markos Chandras <markos.chandras@imgtec.com>
-Date: Wed, 21 Aug 2013 11:47:22 +0100
-Subject: [PATCH 12/27] MIPS: ath79: Avoid using unitialized 'reg' variable
-
-Fixes the following build error:
-arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
-uninitialized in this function [-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
-In file included from arch/mips/ath79/common.c:20:0:
-arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
-arch/mips/include/asm/mach-ath79/ath79.h:139:20:
-error: 'reg' may be used uninitialized in this function
-[-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
-
-Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
-Acked-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
-@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
+++ /dev/null
-From 11562939754b8f877562d9a137854022eb521716 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 5 Mar 2018 11:33:54 +0100
-Subject: [PATCH 13/27] MIPS: ath79: fix system restart
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/setup.c | 1 +
- arch/mips/include/asm/mach-ath79/ath79.h | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP
-
- static void ath79_restart(char *command)
- {
-+ local_irq_disable();
- ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
- for (;;)
- if (cpu_wait)
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -134,6 +134,7 @@ static inline u32 ath79_pll_rr(unsigned
- static inline void ath79_reset_wr(unsigned reg, u32 val)
- {
- __raw_writel(val, ath79_reset_base + reg);
-+ (void) __raw_readl(ath79_reset_base + reg); /* flush */
- }
-
- static inline u32 ath79_reset_rr(unsigned reg)
+++ /dev/null
-From 5a8496923bafc4350f51b26964fdc3252a09fd79 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 5 Mar 2018 11:35:29 +0100
-Subject: [PATCH 14/27] MIPS: ath79: finetune cpu-overrides
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -36,6 +36,7 @@
- #define cpu_has_mdmx 0
- #define cpu_has_mips3d 0
- #define cpu_has_smartmips 0
-+#define cpu_has_rixi 0
-
- #define cpu_has_mips32r1 1
- #define cpu_has_mips32r2 1
-@@ -43,6 +44,7 @@
- #define cpu_has_mips64r2 0
-
- #define cpu_has_mipsmt 0
-+#define cpu_has_userlocal 0
-
- #define cpu_has_64bits 0
- #define cpu_has_64bit_zero_reg 0
-@@ -51,5 +53,9 @@
-
- #define cpu_dcache_line_size() 32
- #define cpu_icache_line_size() 32
-+#define cpu_has_vtag_icache 0
-+#define cpu_has_dc_aliases 1
-+#define cpu_has_ic_fills_f_dc 0
-+#define cpu_has_pindexed_dcache 0
-
- #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
+++ /dev/null
-From b14f8260724abec6c82970085dece6a143d3a0db Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 5 Mar 2018 11:38:21 +0100
-Subject: [PATCH 15/27] MIPS: ath79: enable uart during early_prink
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/early_printk.c | 44 +++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 43 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned
- /* nothing to do */
- }
-
-+static void prom_enable_uart(u32 id)
-+{
-+ void __iomem *gpio_base;
-+ u32 uart_en;
-+ u32 t;
-+
-+ switch (id) {
-+ case REV_ID_MAJOR_AR71XX:
-+ uart_en = AR71XX_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR7240:
-+ case REV_ID_MAJOR_AR7241:
-+ case REV_ID_MAJOR_AR7242:
-+ uart_en = AR724X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR913X:
-+ uart_en = AR913X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9330:
-+ case REV_ID_MAJOR_AR9331:
-+ uart_en = AR933X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9341:
-+ case REV_ID_MAJOR_AR9342:
-+ case REV_ID_MAJOR_AR9344:
-+ /* TODO */
-+ default:
-+ return;
-+ }
-+
-+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
-+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
-+ t |= uart_en;
-+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
-+}
-+
- static void prom_putchar_init(void)
- {
- void __iomem *base;
-@@ -88,8 +128,10 @@ static void prom_putchar_init(void)
-
- default:
- _prom_putchar = prom_putchar_dummy;
-- break;
-+ return;
- }
-+
-+ prom_enable_uart(id);
- }
-
- void prom_putchar(unsigned char ch)
+++ /dev/null
-From cff23ba486e3c5d17c4d7e446f5eddead855c101 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 08:45:55 +0100
-Subject: [PATCH 16/27] MIPS: ath79: add support for QCA953x SoC
-
-Note that the clock calculation looks very similar to the QCA955x, but the
-meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
----
- arch/mips/ath79/Kconfig | 6 ++-
- arch/mips/ath79/clock.c | 87 ++++++++++++++++++++++++++++++++
- arch/mips/ath79/common.c | 4 ++
- arch/mips/ath79/dev-common.c | 4 ++
- arch/mips/ath79/early_printk.c | 2 +
- arch/mips/ath79/irq.c | 33 +++++++++++-
- arch/mips/ath79/setup.c | 21 ++++++--
- arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++
- 8 files changed, 162 insertions(+), 6 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -94,6 +94,10 @@ config SOC_AR934X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA953X
-+ select USB_ARCH_HAS_EHCI
-+ def_bool n
-+
- config SOC_QCA955X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
-@@ -115,7 +119,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
- def_bool n
-
- endif
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -355,6 +355,91 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
-+static void __init qca953x_clocks_init(void)
-+{
-+ unsigned long ref_rate;
-+ unsigned long cpu_rate;
-+ unsigned long ddr_rate;
-+ unsigned long ahb_rate;
-+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40)
-+ ref_rate = 40 * 1000 * 1000;
-+ else
-+ ref_rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+ cpu_pll = nint * ref_rate / ref_div;
-+ cpu_pll += frac * (ref_rate >> 6) / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+ ddr_pll = nint * ref_rate / ref_div;
-+ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ cpu_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+ cpu_rate = cpu_pll / (postdiv + 1);
-+ else
-+ cpu_rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ddr_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+ ddr_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ddr_rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ahb_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ahb_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ahb_rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_add_sys_clkdev("ref", ref_rate);
-+ ath79_add_sys_clkdev("cpu", cpu_rate);
-+ ath79_add_sys_clkdev("ddr", ddr_rate);
-+ ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+ clk_add_alias("wdt", NULL, "ref", NULL);
-+ clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- static void __init qca955x_clocks_init(void)
- {
- unsigned long ref_rate;
-@@ -450,6 +535,8 @@ void __init ath79_clocks_init(void)
- ar933x_clocks_init();
- else if (soc_is_ar934x())
- ar934x_clocks_init();
-+ else if (soc_is_qca953x())
-+ qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
- else
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -85,6 +85,7 @@ void __init ath79_register_uart(void)
- soc_is_ar724x() ||
- soc_is_ar913x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
-@@ -148,6 +149,9 @@ void __init ath79_gpio_init(void)
- } else if (soc_is_ar934x()) {
- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
-+ } else if (soc_is_qca953x()) {
-+ ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT;
-+ ath79_gpio_pdata.oe_inverted = 1;
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -116,6 +116,8 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_AR9341:
- case REV_ID_MAJOR_AR9342:
- case REV_ID_MAJOR_AR9344:
-+ case REV_ID_MAJOR_QCA9533:
-+ case REV_ID_MAJOR_QCA9533_V2:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
- _prom_putchar = prom_putchar_ar71xx;
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -56,6 +56,34 @@ static void ar934x_ip2_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
- }
-
-+static void qca953x_ip2_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
-+
-+ if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
-+ ath79_ddr_wb_flush(3);
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
-+ ath79_ddr_wb_flush(4);
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ } else {
-+ spurious_interrupt();
-+ }
-+}
-+
-+static void qca953x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
-+}
-+
- static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
- {
- u32 status;
-@@ -143,7 +171,7 @@ void __init arch_init_irq(void)
- soc_is_ar913x() || soc_is_ar933x()) {
- irq_wb_chan2 = 3;
- irq_wb_chan3 = 2;
-- } else if (soc_is_ar934x()) {
-+ } else if (soc_is_ar934x() || soc_is_qca953x()) {
- irq_wb_chan3 = 2;
- }
-
-@@ -154,6 +182,7 @@ void __init arch_init_irq(void)
- else if (soc_is_ar724x() ||
- soc_is_ar933x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x())
- misc_is_ar71xx = false;
- else
-@@ -164,6 +193,8 @@ void __init arch_init_irq(void)
-
- if (soc_is_ar934x())
- ar934x_ip2_irq_init();
-+ else if (soc_is_qca953x())
-+ qca953x_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
- }
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type
- u32 major;
- u32 minor;
- u32 rev = 0;
-+ u32 ver = 1;
-
- id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
- major = id & REV_ID_MAJOR_MASK;
-@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type
- rev = id & AR934X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA9533_V2:
-+ ver = 2;
-+ ath79_soc_rev = 2;
-+ /* drop through */
-+
-+ case REV_ID_MAJOR_QCA9533:
-+ ath79_soc = ATH79_SOC_QCA9533;
-+ chip = "9533";
-+ rev = id & QCA953X_REV_ID_REVISION_MASK;
-+ break;
-+
- case REV_ID_MAJOR_QCA9556:
- ath79_soc = ATH79_SOC_QCA9556;
- chip = "9556";
-@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-
-- ath79_soc_rev = rev;
-+ if (ver == 1)
-+ ath79_soc_rev = rev;
-
-- if (soc_is_qca955x())
-- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
-- chip, rev);
-+ if (soc_is_qca953x() || soc_is_qca955x())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
-+ chip, ver, rev);
- else
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -32,6 +32,7 @@ enum ath79_soc_type {
- ATH79_SOC_AR9341,
- ATH79_SOC_AR9342,
- ATH79_SOC_AR9344,
-+ ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
- };
-@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void)
- return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
- }
-
-+static inline int soc_is_qca9533(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA9533;
-+}
-+
-+static inline int soc_is_qca953x(void)
-+{
-+ return soc_is_qca9533();
-+}
-+
- static inline int soc_is_qca9556(void)
- {
- return ath79_soc == ATH79_SOC_QCA9556;
+++ /dev/null
-From 6aeb24b9508bbe91f89cd4eb21d0d7582d971146 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <hackpascal@gmail.com>
-Date: Tue, 6 Mar 2018 08:48:31 +0100
-Subject: [PATCH 17/27] MIPS: ath79: add support for qca956x soc
-
-This patch adds soc support for QCA9561 and TP9343.
-TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
-The qca956x_wmac has not yet been supported by ath9k.
-
-tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)
-
-Signed-off-by: Weijie Gao <hackpascal@gmail.com>
----
- arch/mips/ath79/Kconfig | 2 +-
- arch/mips/ath79/clock.c | 96 ++++++++++++++++++++++++++++++++
- arch/mips/ath79/common.c | 4 ++
- arch/mips/ath79/dev-common.c | 7 ++-
- arch/mips/ath79/early_printk.c | 2 +
- arch/mips/ath79/irq.c | 87 ++++++++++++++++++++++++++++-
- arch/mips/ath79/pci.c | 12 ++++
- arch/mips/ath79/setup.c | 17 +++++-
- arch/mips/include/asm/mach-ath79/ath79.h | 22 ++++++++
- 9 files changed, 245 insertions(+), 4 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -119,7 +119,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
- def_bool n
-
- endif
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -525,6 +525,100 @@ static void __init qca955x_clocks_init(v
- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
-+static void __init qca956x_clocks_init(void)
-+{
-+ unsigned long ref_rate;
-+ unsigned long cpu_rate;
-+ unsigned long ddr_rate;
-+ unsigned long ahb_rate;
-+ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40)
-+ ref_rate = 40 * 1000 * 1000;
-+ else
-+ ref_rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
-+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
-+ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
-+
-+ cpu_pll = nint * ref_rate / ref_div;
-+ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
-+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
-+ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
-+
-+ ddr_pll = nint * ref_rate / ref_div;
-+ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ cpu_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
-+ cpu_rate = ddr_pll / (postdiv + 1);
-+ else
-+ cpu_rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ddr_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
-+ ddr_rate = cpu_pll / (postdiv + 1);
-+ else
-+ ddr_rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ahb_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ahb_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ahb_rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_add_sys_clkdev("ref", ref_rate);
-+ ath79_add_sys_clkdev("cpu", cpu_rate);
-+ ath79_add_sys_clkdev("ddr", ddr_rate);
-+ ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+ clk_add_alias("wdt", NULL, "ref", NULL);
-+ clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- void __init ath79_clocks_init(void)
- {
- if (soc_is_ar71xx())
-@@ -539,6 +633,8 @@ void __init ath79_clocks_init(void)
- qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_clocks_init();
- else
- BUG();
- }
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask)
- reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- panic("Reset register not defined for this SOC");
-
-@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- panic("Reset register not defined for this SOC");
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -86,7 +86,9 @@ void __init ath79_register_uart(void)
- soc_is_ar913x() ||
- soc_is_ar934x() ||
- soc_is_qca953x() ||
-- soc_is_qca955x()) {
-+ soc_is_qca955x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
- } else if (soc_is_ar933x()) {
-@@ -155,6 +157,9 @@ void __init ath79_gpio_init(void)
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
-+ } else if (soc_is_qca956x() || soc_is_tp9343()) {
-+ ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT;
-+ ath79_gpio_pdata.oe_inverted = 1;
- } else {
- BUG();
- }
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -120,6 +120,8 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_QCA9533_V2:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
-+ case REV_ID_MAJOR_TP9343:
-+ case REV_ID_MAJOR_QCA956X:
- _prom_putchar = prom_putchar_ar71xx;
- break;
-
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -156,6 +156,87 @@ static void qca955x_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
- }
-
-+static void qca956x_ip2_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_WMAC_ALL) {
-+ /* TODO: flsuh DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ }
-+}
-+
-+static void qca956x_ip3_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
-+ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ if (status & QCA956X_EXT_INT_USB1) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(0));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_USB2) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(1));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(2));
-+ }
-+}
-+
-+static void qca956x_enable_timer_cb(void) {
-+ u32 misc;
-+
-+ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
-+ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
-+ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
-+}
-+
-+static void qca956x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
-+
-+ for (i = ATH79_IP3_IRQ_BASE;
-+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
-+
-+ /* QCA956x timer init workaround has to be applied right before setting
-+ * up the clock. Else, there will be no jiffies */
-+ late_time_init = &qca956x_enable_timer_cb;
-+}
-+
- void __init arch_init_irq(void)
- {
- unsigned irq_wb_chan2 = -1;
-@@ -183,7 +264,9 @@ void __init arch_init_irq(void)
- soc_is_ar933x() ||
- soc_is_ar934x() ||
- soc_is_qca953x() ||
-- soc_is_qca955x())
-+ soc_is_qca955x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343())
- misc_is_ar71xx = false;
- else
- BUG();
-@@ -197,4 +280,6 @@ void __init arch_init_irq(void)
- qca953x_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_irq_init();
- }
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -82,6 +82,9 @@ int pcibios_map_irq(const struct pci_dev
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-+ } else if (soc_is_qca956x()) {
-+ ath79_pci_irq_map = qca956x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
- } else {
- pr_crit("pci %s: invalid irq map\n",
- pci_name((struct pci_dev *) dev));
-@@ -261,6 +264,15 @@ int __init ath79_register_pci(void)
- QCA955X_PCI_MEM_SIZE,
- 1,
- ATH79_IP3_IRQ(2));
-+ } else if (soc_is_qca956x()) {
-+ pdev = ath79_register_pci_ar724x(0,
-+ QCA956X_PCI_CFG_BASE1,
-+ QCA956X_PCI_CTRL_BASE1,
-+ QCA956X_PCI_CRP_BASE1,
-+ QCA956X_PCI_MEM_BASE1,
-+ QCA956X_PCI_MEM_SIZE,
-+ 1,
-+ ATH79_IP3_IRQ(2));
- } else {
- /* No PCI support */
- return -ENODEV;
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type
- rev = id & QCA955X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA956X:
-+ ath79_soc = ATH79_SOC_QCA956X;
-+ chip = "956X";
-+ rev = id & QCA956X_REV_ID_REVISION_MASK;
-+ break;
-+
-+ case REV_ID_MAJOR_TP9343:
-+ ath79_soc = ATH79_SOC_TP9343;
-+ chip = "9343";
-+ rev = id & QCA956X_REV_ID_REVISION_MASK;
-+ break;
-+
- default:
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type
- if (ver == 1)
- ath79_soc_rev = rev;
-
-- if (soc_is_qca953x() || soc_is_qca955x())
-+ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x())
- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
- chip, ver, rev);
-+ else if (soc_is_tp9343())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
-+ chip, rev);
- else
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -35,6 +35,8 @@ enum ath79_soc_type {
- ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
-+ ATH79_SOC_TP9343,
-+ ATH79_SOC_QCA956X,
- };
-
- extern enum ath79_soc_type ath79_soc;
-@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void)
- return soc_is_qca9556() || soc_is_qca9558();
- }
-
-+static inline int soc_is_tp9343(void)
-+{
-+ return ath79_soc == ATH79_SOC_TP9343;
-+}
-+
-+static inline int soc_is_qca9561(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca9563(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca956x(void)
-+{
-+ return soc_is_qca9561() || soc_is_qca9563();
-+}
-+
- void ath79_ddr_wb_flush(unsigned int reg);
- void ath79_ddr_set_pci_windows(void);
-
+++ /dev/null
-From 308c2ef9c4f1be2e1cee699042671eb973b51803 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Tue, 6 Mar 2018 08:37:43 +0100
-Subject: [PATCH 19/27] MIPS: ath79: get PCIe controller out of reset
-
-The ar724x pci driver expects the PCIe controller to be brought out of
-reset by the bootloader.
-
-At least the AVM Fritz 300E bootloader doesn't take care of releasing
-the different PCIe controller related resets which causes an endless
-hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
-Application Control register (0x180f0000) is read from.
-
-Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
-host controller is still in reset during probing.
-
-The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
-set to ready. It has been shown that 10ms might not be enough time if
-PCIe should be used right after setting the bit. During my tests it
-took up to 20ms till the link was up. Giving the link up to 100ms
-should work for all cases.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -12,14 +12,18 @@
- #include <linux/irq.h>
- #include <linux/pci.h>
- #include <linux/init.h>
-+#include <linux/delay.h>
- #include <linux/platform_device.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-
-+#define AR724X_PCI_REG_APP 0x00
- #define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
- #define AR724X_PCI_REG_INT_MASK 0x50
-
-+#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0)
-+
- #define AR724X_PCI_RESET_LINK_UP BIT(0)
-
- #define AR724X_PCI_INT_DEV0 BIT(14)
-@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
- apc);
- }
-
-+static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
-+{
-+ u32 ppl, app;
-+ int wait = 0;
-+
-+ /* deassert PCIe host controller and PCIe PHY reset */
-+ ath79_device_reset_clear(AR724X_RESET_PCIE);
-+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* set PCIE Application Control to ready */
-+ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-+ app |= AR724X_PCI_APP_LTSSM_ENABLE;
-+ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
-+
-+ /* wait up to 100ms for PHY link up */
-+ do {
-+ mdelay(10);
-+ wait++;
-+ } while (wait < 10 && !ar724x_pci_check_link(apc));
-+}
-+
- static int ar724x_pci_probe(struct platform_device *pdev)
- {
- struct ar724x_pci_controller *apc;
-@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
- apc->pci_controller.io_resource = &apc->io_res;
- apc->pci_controller.mem_resource = &apc->mem_res;
-
-+ /*
-+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-+ * host controller is in reset.
-+ */
-+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+ ar724x_pci_hw_init(apc);
-+
- apc->link_up = ar724x_pci_check_link(apc);
- if (!apc->link_up)
- dev_warn(&pdev->dev, "PCIe link is down\n");
+++ /dev/null
-From cc5a306038b7956b5736a70696dddaaf3792df76 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:22:49 +0100
-Subject: [PATCH 20/27] MIPS: ath79: turn pci-ar71xx driver into a pure OF
- driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 81 +++++++++++++++++++++++-----------------------
- 1 file changed, 40 insertions(+), 41 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -18,8 +18,11 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -49,12 +52,13 @@
- #define AR71XX_PCI_IRQ_COUNT 5
-
- struct ar71xx_pci_controller {
-+ struct device_node *np;
- void __iomem *cfg_base;
- int irq;
-- int irq_base;
- struct pci_controller pci_ctrl;
- struct resource io_res;
- struct resource mem_res;
-+ struct irq_domain *domain;
- };
-
- /* Byte lane enable bits */
-@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = {
-
- static void ar71xx_pci_irq_handler(struct irq_desc *desc)
- {
-- struct ar71xx_pci_controller *apc;
- void __iomem *base = ath79_reset_base;
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
- u32 pending;
-
-- apc = irq_desc_get_handler_data(desc);
--
-+ chained_irq_enter(chip, desc);
- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-
- if (pending & AR71XX_PCI_INT_DEV0)
-- generic_handle_irq(apc->irq_base + 0);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
-
- else if (pending & AR71XX_PCI_INT_DEV1)
-- generic_handle_irq(apc->irq_base + 1);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 2));
-
- else if (pending & AR71XX_PCI_INT_DEV2)
-- generic_handle_irq(apc->irq_base + 2);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 3));
-
- else if (pending & AR71XX_PCI_INT_CORE)
-- generic_handle_irq(apc->irq_base + 4);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 4));
-
- else
- spurious_interrupt();
-+ chained_irq_exit(chip, desc);
- }
-
- static void ar71xx_pci_irq_unmask(struct irq_data *d)
-@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
-- irq = d->irq - apc->irq_base;
-+ irq = irq_linear_revmap(apc->domain, d->irq);
-
- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
-- irq = d->irq - apc->irq_base;
-+ irq = irq_linear_revmap(apc->domain, d->irq);
-
- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -294,24 +299,30 @@ static struct irq_chip ar71xx_pci_irq_ch
- .irq_mask_ack = ar71xx_pci_irq_mask,
- };
-
-+static int ar71xx_pci_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ar71xx_pci_controller *apc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, apc);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ar71xx_pci_irq_map,
-+};
-+
- static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- void __iomem *base = ath79_reset_base;
-- int i;
-
- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
-
-- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
--
-- apc->irq_base = ATH79_PCI_IRQ_BASE;
-- for (i = apc->irq_base;
-- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
-- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
-- handle_level_irq);
-- irq_set_chip_data(i, apc);
-- }
--
-+ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-+ &ar71xx_pci_domain_ops, apc);
- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
- apc);
- }
-@@ -328,6 +339,11 @@ static void ar71xx_pci_reset(void)
- mdelay(100);
- }
-
-+static const struct of_device_id ar71xx_pci_ids[] = {
-+ { .compatible = "qca,ar7100-pci" },
-+ {},
-+};
-+
- static int ar71xx_pci_probe(struct platform_device *pdev)
- {
- struct ar71xx_pci_controller *apc;
-@@ -348,26 +364,6 @@ static int ar71xx_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->io_res.parent = res;
-- apc->io_res.name = "PCI IO space";
-- apc->io_res.start = res->start;
-- apc->io_res.end = res->end;
-- apc->io_res.flags = IORESOURCE_IO;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->mem_res.parent = res;
-- apc->mem_res.name = "PCI memory space";
-- apc->mem_res.start = res->start;
-- apc->mem_res.end = res->end;
-- apc->mem_res.flags = IORESOURCE_MEM;
--
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
-@@ -380,9 +376,11 @@ static int ar71xx_pci_probe(struct platf
-
- ar71xx_pci_irq_init(apc);
-
-+ apc->np = pdev->dev.of_node;
- apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- apc->pci_ctrl.mem_resource = &apc->mem_res;
- apc->pci_ctrl.io_resource = &apc->io_res;
-+ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
-
- register_pci_controller(&apc->pci_ctrl);
-
-@@ -393,6 +391,7 @@ static struct platform_driver ar71xx_pci
- .probe = ar71xx_pci_probe,
- .driver = {
- .name = "ar71xx-pci",
-+ .of_match_table = of_match_ptr(ar71xx_pci_ids),
- },
- };
-
+++ /dev/null
-From 0e7f36bfd68401e8c42933e7f770f270497bb9a8 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:23:25 +0100
-Subject: [PATCH 21/27] MIPS: ath79: turn pci-ar724x driver into a pure OF
- driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 86 +++++++++++++++++++++-------------------------
- 1 file changed, 40 insertions(+), 46 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -14,8 +14,11 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-
- #define AR724X_PCI_REG_APP 0x00
- #define AR724X_PCI_REG_RESET 0x18
-@@ -45,17 +48,20 @@ struct ar724x_pci_controller {
- void __iomem *crp_base;
-
- int irq;
-- int irq_base;
-
- bool link_up;
- bool bar0_is_cached;
- u32 bar0_value;
-
-+ struct device_node *np;
- struct pci_controller pci_controller;
-+ struct irq_domain *domain;
- struct resource io_res;
- struct resource mem_res;
- };
-
-+static struct irq_chip ar724x_pci_irq_chip;
-+
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- u32 reset;
-@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = {
-
- static void ar724x_pci_irq_handler(struct irq_desc *desc)
- {
-- struct ar724x_pci_controller *apc;
-- void __iomem *base;
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
- u32 pending;
-
-- apc = irq_desc_get_handler_data(desc);
-- base = apc->ctrl_base;
--
-- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
-- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+ chained_irq_enter(chip, desc);
-+ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
-+ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
-
- if (pending & AR724X_PCI_INT_DEV0)
-- generic_handle_irq(apc->irq_base + 0);
--
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- else
- spurious_interrupt();
-+ chained_irq_exit(chip, desc);
- }
-
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-- int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-- offset = apc->irq_base - d->irq;
-
-- switch (offset) {
-+ switch (irq_linear_revmap(apc->domain, d->irq)) {
- case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t | AR724X_PCI_INT_DEV0,
-@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-- int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-- offset = apc->irq_base - d->irq;
-
-- switch (offset) {
-+ switch (irq_linear_revmap(apc->domain, d->irq)) {
- case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t & ~AR724X_PCI_INT_DEV0,
-@@ -305,26 +305,32 @@ static struct irq_chip ar724x_pci_irq_ch
- .irq_mask_ack = ar724x_pci_irq_mask,
- };
-
-+static int ar724x_pci_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ar724x_pci_controller *apc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, apc);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ar724x_pci_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ar724x_pci_irq_map,
-+};
-+
- static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
- int id)
- {
- void __iomem *base;
-- int i;
-
- base = apc->ctrl_base;
-
- __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
-
-- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
--
-- for (i = apc->irq_base;
-- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
-- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
-- handle_level_irq);
-- irq_set_chip_data(i, apc);
-- }
--
-+ apc->domain = irq_domain_add_linear(apc->np, 2, &ar724x_pci_domain_ops, apc);
- irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
- apc);
- }
-@@ -394,29 +400,11 @@ static int ar724x_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->io_res.parent = res;
-- apc->io_res.name = "PCI IO space";
-- apc->io_res.start = res->start;
-- apc->io_res.end = res->end;
-- apc->io_res.flags = IORESOURCE_IO;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->mem_res.parent = res;
-- apc->mem_res.name = "PCI memory space";
-- apc->mem_res.start = res->start;
-- apc->mem_res.end = res->end;
-- apc->mem_res.flags = IORESOURCE_MEM;
--
-+ apc->np = pdev->dev.of_node;
- apc->pci_controller.pci_ops = &ar724x_pci_ops;
- apc->pci_controller.io_resource = &apc->io_res;
- apc->pci_controller.mem_resource = &apc->mem_res;
-+ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
-
- /*
- * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-@@ -438,10 +426,16 @@ static int ar724x_pci_probe(struct platf
- return 0;
- }
-
-+static const struct of_device_id ar724x_pci_ids[] = {
-+ { .compatible = "qcom,ar7240-pci" },
-+ {},
-+};
-+
- static struct platform_driver ar724x_pci_driver = {
- .probe = ar724x_pci_probe,
- .driver = {
- .name = "ar724x-pci",
-+ .of_match_table = of_match_ptr(ar724x_pci_ids),
- },
- };
-
+++ /dev/null
-From f4128f3224df2309262ef8d1275d928717ebefd0 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:21:46 +0100
-Subject: [PATCH 22/27] MIPS: ath79: drop pci.c
-
-This patch drops pci.c fromt he ath79 folder and moves the the pcibios
-callbacks to a new fixup file.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile | 1 -
- arch/mips/ath79/pci.c | 285 --------------------------------------------
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/fixup-ath79.c | 21 ++++
- 4 files changed, 22 insertions(+), 286 deletions(-)
- delete mode 100644 arch/mips/ath79/pci.c
- create mode 100644 arch/mips/pci/fixup-ath79.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,7 +11,6 @@
- obj-y := prom.o setup.o irq.o common.o clock.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--obj-$(CONFIG_PCI) += pci.o
-
- #
- # Devices
---- a/arch/mips/ath79/pci.c
-+++ /dev/null
-@@ -1,285 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X specific PCI setup code
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/resource.h>
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/irq.h>
--#include "pci.h"
--
--static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
--static const struct ath79_pci_irq *ath79_pci_irq_map;
--static unsigned ath79_pci_nr_irqs;
--
--static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
-- {
-- .slot = 17,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(0),
-- }, {
-- .slot = 18,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(1),
-- }, {
-- .slot = 19,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(2),
-- }
--};
--
--static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
-- {
-- .slot = 0,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(0),
-- }
--};
--
--static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
-- {
-- .bus = 0,
-- .slot = 0,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(0),
-- },
-- {
-- .bus = 1,
-- .slot = 0,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(1),
-- },
--};
--
--int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
--{
-- int irq = -1;
-- int i;
--
-- if (ath79_pci_nr_irqs == 0 ||
-- ath79_pci_irq_map == NULL) {
-- if (soc_is_ar71xx()) {
-- ath79_pci_irq_map = ar71xx_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
-- } else if (soc_is_ar724x() ||
-- soc_is_ar9342() ||
-- soc_is_ar9344()) {
-- ath79_pci_irq_map = ar724x_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
-- } else if (soc_is_qca955x()) {
-- ath79_pci_irq_map = qca955x_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-- } else if (soc_is_qca956x()) {
-- ath79_pci_irq_map = qca956x_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
-- } else {
-- pr_crit("pci %s: invalid irq map\n",
-- pci_name((struct pci_dev *) dev));
-- return irq;
-- }
-- }
--
-- for (i = 0; i < ath79_pci_nr_irqs; i++) {
-- const struct ath79_pci_irq *entry;
--
-- entry = &ath79_pci_irq_map[i];
-- if (entry->bus == dev->bus->number &&
-- entry->slot == slot &&
-- entry->pin == pin) {
-- irq = entry->irq;
-- break;
-- }
-- }
--
-- if (irq < 0)
-- pr_crit("pci %s: no irq found for pin %u\n",
-- pci_name((struct pci_dev *) dev), pin);
-- else
-- pr_info("pci %s: using irq %d for pin %u\n",
-- pci_name((struct pci_dev *) dev), irq, pin);
--
-- return irq;
--}
--
--int pcibios_plat_dev_init(struct pci_dev *dev)
--{
-- if (ath79_pci_plat_dev_init)
-- return ath79_pci_plat_dev_init(dev);
--
-- return 0;
--}
--
--void __init ath79_pci_set_irq_map(unsigned nr_irqs,
-- const struct ath79_pci_irq *map)
--{
-- ath79_pci_nr_irqs = nr_irqs;
-- ath79_pci_irq_map = map;
--}
--
--void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
--{
-- ath79_pci_plat_dev_init = func;
--}
--
--static struct platform_device *
--ath79_register_pci_ar71xx(void)
--{
-- struct platform_device *pdev;
-- struct resource res[4];
--
-- memset(res, 0, sizeof(res));
--
-- res[0].name = "cfg_base";
-- res[0].flags = IORESOURCE_MEM;
-- res[0].start = AR71XX_PCI_CFG_BASE;
-- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
--
-- res[1].flags = IORESOURCE_IRQ;
-- res[1].start = ATH79_CPU_IRQ(2);
-- res[1].end = ATH79_CPU_IRQ(2);
--
-- res[2].name = "io_base";
-- res[2].flags = IORESOURCE_IO;
-- res[2].start = 0;
-- res[2].end = 0;
--
-- res[3].name = "mem_base";
-- res[3].flags = IORESOURCE_MEM;
-- res[3].start = AR71XX_PCI_MEM_BASE;
-- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
--
-- pdev = platform_device_register_simple("ar71xx-pci", -1,
-- res, ARRAY_SIZE(res));
-- return pdev;
--}
--
--static struct platform_device *
--ath79_register_pci_ar724x(int id,
-- unsigned long cfg_base,
-- unsigned long ctrl_base,
-- unsigned long crp_base,
-- unsigned long mem_base,
-- unsigned long mem_size,
-- unsigned long io_base,
-- int irq)
--{
-- struct platform_device *pdev;
-- struct resource res[6];
--
-- memset(res, 0, sizeof(res));
--
-- res[0].name = "cfg_base";
-- res[0].flags = IORESOURCE_MEM;
-- res[0].start = cfg_base;
-- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
--
-- res[1].name = "ctrl_base";
-- res[1].flags = IORESOURCE_MEM;
-- res[1].start = ctrl_base;
-- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
--
-- res[2].flags = IORESOURCE_IRQ;
-- res[2].start = irq;
-- res[2].end = irq;
--
-- res[3].name = "mem_base";
-- res[3].flags = IORESOURCE_MEM;
-- res[3].start = mem_base;
-- res[3].end = mem_base + mem_size - 1;
--
-- res[4].name = "io_base";
-- res[4].flags = IORESOURCE_IO;
-- res[4].start = io_base;
-- res[4].end = io_base;
--
-- res[5].name = "crp_base";
-- res[5].flags = IORESOURCE_MEM;
-- res[5].start = crp_base;
-- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
--
-- pdev = platform_device_register_simple("ar724x-pci", id,
-- res, ARRAY_SIZE(res));
-- return pdev;
--}
--
--int __init ath79_register_pci(void)
--{
-- struct platform_device *pdev = NULL;
--
-- if (soc_is_ar71xx()) {
-- pdev = ath79_register_pci_ar71xx();
-- } else if (soc_is_ar724x()) {
-- pdev = ath79_register_pci_ar724x(-1,
-- AR724X_PCI_CFG_BASE,
-- AR724X_PCI_CTRL_BASE,
-- AR724X_PCI_CRP_BASE,
-- AR724X_PCI_MEM_BASE,
-- AR724X_PCI_MEM_SIZE,
-- 0,
-- ATH79_CPU_IRQ(2));
-- } else if (soc_is_ar9342() ||
-- soc_is_ar9344()) {
-- u32 bootstrap;
--
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
-- return -ENODEV;
--
-- pdev = ath79_register_pci_ar724x(-1,
-- AR724X_PCI_CFG_BASE,
-- AR724X_PCI_CTRL_BASE,
-- AR724X_PCI_CRP_BASE,
-- AR724X_PCI_MEM_BASE,
-- AR724X_PCI_MEM_SIZE,
-- 0,
-- ATH79_IP2_IRQ(0));
-- } else if (soc_is_qca9558()) {
-- pdev = ath79_register_pci_ar724x(0,
-- QCA955X_PCI_CFG_BASE0,
-- QCA955X_PCI_CTRL_BASE0,
-- QCA955X_PCI_CRP_BASE0,
-- QCA955X_PCI_MEM_BASE0,
-- QCA955X_PCI_MEM_SIZE,
-- 0,
-- ATH79_IP2_IRQ(0));
--
-- pdev = ath79_register_pci_ar724x(1,
-- QCA955X_PCI_CFG_BASE1,
-- QCA955X_PCI_CTRL_BASE1,
-- QCA955X_PCI_CRP_BASE1,
-- QCA955X_PCI_MEM_BASE1,
-- QCA955X_PCI_MEM_SIZE,
-- 1,
-- ATH79_IP3_IRQ(2));
-- } else if (soc_is_qca956x()) {
-- pdev = ath79_register_pci_ar724x(0,
-- QCA956X_PCI_CFG_BASE1,
-- QCA956X_PCI_CTRL_BASE1,
-- QCA956X_PCI_CRP_BASE1,
-- QCA956X_PCI_MEM_BASE1,
-- QCA956X_PCI_MEM_SIZE,
-- 1,
-- ATH79_IP3_IRQ(2));
-- } else {
-- /* No PCI support */
-- return -ENODEV;
-- }
--
-- if (!pdev)
-- pr_err("unable to register PCI controller device\n");
--
-- return pdev ? 0 : -ENODEV;
--}
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-vir
- #
- # These are still pretty much in the old state, watch, go blind.
- #
-+obj-$(CONFIG_ATH79) += fixup-ath79.o
- obj-$(CONFIG_LASAT) += pci-lasat.o
- obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
- obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-ath79.c
-@@ -0,0 +1,21 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+//#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return of_irq_parse_and_map_pci(dev, slot, pin);
-+}
+++ /dev/null
-From 6e38a86d50dba5cc1da9bfd07969d76dd3ac2dda Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:28:13 +0100
-Subject: [PATCH 23/27] MIPS: ath79: drop mach files
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Kconfig | 73 -------------------
- arch/mips/ath79/Makefile | 10 ---
- arch/mips/ath79/mach-ap121.c | 92 ------------------------
- arch/mips/ath79/mach-ap136.c | 156 -----------------------------------------
- arch/mips/ath79/mach-ap81.c | 100 --------------------------
- arch/mips/ath79/mach-db120.c | 136 -----------------------------------
- arch/mips/ath79/mach-pb44.c | 128 ---------------------------------
- arch/mips/ath79/mach-ubnt-xm.c | 126 ---------------------------------
- 8 files changed, 821 deletions(-)
- delete mode 100644 arch/mips/ath79/mach-ap121.c
- delete mode 100644 arch/mips/ath79/mach-ap136.c
- delete mode 100644 arch/mips/ath79/mach-ap81.c
- delete mode 100644 arch/mips/ath79/mach-db120.c
- delete mode 100644 arch/mips/ath79/mach-pb44.c
- delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,79 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
-
--menu "Atheros AR71XX/AR724X/AR913X machine selection"
--
--config ATH79_MACH_AP121
-- bool "Atheros AP121 reference board"
-- select SOC_AR933X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP121 reference board.
--
--config ATH79_MACH_AP136
-- bool "Atheros AP136 reference board"
-- select SOC_QCA955X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 reference board.
--
--config ATH79_MACH_AP81
-- bool "Atheros AP81 reference board"
-- select SOC_AR913X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP81 reference board.
--
--config ATH79_MACH_DB120
-- bool "Atheros DB120 reference board"
-- select SOC_AR934X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros DB120 reference board.
--
--config ATH79_MACH_PB44
-- bool "Atheros PB44 reference board"
-- select SOC_AR71XX
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros PB44 reference board.
--
--config ATH79_MACH_UBNT_XM
-- bool "Ubiquiti Networks XM (rev 1.0) board"
-- select SOC_AR724X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- help
-- Say 'Y' here if you want your kernel to support the
-- Ubiquiti Networks XM (rev 1.0) board.
--
--endmenu
--
- config SOC_AR71XX
- select HW_HAS_PCI
- def_bool n
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -21,13 +21,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev
- obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
--
--#
--# Machines
--#
--obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
--obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
--obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
--obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
--obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
--obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
---- a/arch/mips/ath79/mach-ap121.c
-+++ /dev/null
-@@ -1,92 +0,0 @@
--/*
-- * Atheros AP121 board support
-- *
-- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--
--#define AP121_GPIO_LED_WLAN 0
--#define AP121_GPIO_LED_USB 1
--
--#define AP121_GPIO_BTN_JUMPSTART 11
--#define AP121_GPIO_BTN_RESET 12
--
--#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
--#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
--
--#define AP121_CAL_DATA_ADDR 0x1fff1000
--
--static struct gpio_led ap121_leds_gpio[] __initdata = {
-- {
-- .name = "ap121:green:usb",
-- .gpio = AP121_GPIO_LED_USB,
-- .active_low = 0,
-- },
-- {
-- .name = "ap121:green:wlan",
-- .gpio = AP121_GPIO_LED_WLAN,
-- .active_low = 0,
-- },
--};
--
--static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
-- {
-- .desc = "jumpstart button",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP121_GPIO_BTN_JUMPSTART,
-- .active_low = 1,
-- },
-- {
-- .desc = "reset button",
-- .type = EV_KEY,
-- .code = KEY_RESTART,
-- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP121_GPIO_BTN_RESET,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info ap121_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l1606e",
-- }
--};
--
--static struct ath79_spi_platform_data ap121_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--static void __init ap121_setup(void)
--{
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
-- ap121_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap121_gpio_keys),
-- ap121_gpio_keys);
--
-- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-- ARRAY_SIZE(ap121_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(cal_data);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
-- ap121_setup);
---- a/arch/mips/ath79/mach-ap136.c
-+++ /dev/null
-@@ -1,156 +0,0 @@
--/*
-- * Qualcomm Atheros AP136 reference board support
-- *
-- * Copyright (c) 2012 Qualcomm Atheros
-- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
--#define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
--#define AP136_GPIO_LED_WLAN_5G 12
--#define AP136_GPIO_LED_WPS_RED 15
--#define AP136_GPIO_LED_WPS_GREEN 20
--
--#define AP136_GPIO_BTN_WPS 16
--#define AP136_GPIO_BTN_RFKILL 21
--
--#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
--#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
--
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led ap136_leds_gpio[] __initdata = {
-- {
-- .name = "qca:green:status",
-- .gpio = AP136_GPIO_LED_STATUS_GREEN,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:status",
-- .gpio = AP136_GPIO_LED_STATUS_RED,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:green:wps",
-- .gpio = AP136_GPIO_LED_WPS_GREEN,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:wps",
-- .gpio = AP136_GPIO_LED_WPS_RED,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:wlan-2g",
-- .gpio = AP136_GPIO_LED_WLAN_2G,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:usb",
-- .gpio = AP136_GPIO_LED_USB,
-- .active_low = 1,
-- }
--};
--
--static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
-- {
-- .desc = "WPS button",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP136_GPIO_BTN_WPS,
-- .active_low = 1,
-- },
-- {
-- .desc = "RFKILL button",
-- .type = EV_KEY,
-- .code = KEY_RFKILL,
-- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP136_GPIO_BTN_RFKILL,
-- .active_low = 1,
-- },
--};
--
--static struct spi_board_info ap136_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- }
--};
--
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
--
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
--{
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
--
-- return 0;
--}
--
--static void __init ap136_pci_init(u8 *eeprom)
--{
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init ap136_setup(void)
--{
-- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-- ap136_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap136_gpio_keys),
-- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-- "Atheros AP136-010 reference board",
-- ap136_setup);
---- a/arch/mips/ath79/mach-ap81.c
-+++ /dev/null
-@@ -1,100 +0,0 @@
--/*
-- * Atheros AP81 board support
-- *
-- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-wmac.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--
--#define AP81_GPIO_LED_STATUS 1
--#define AP81_GPIO_LED_AOSS 3
--#define AP81_GPIO_LED_WLAN 6
--#define AP81_GPIO_LED_POWER 14
--
--#define AP81_GPIO_BTN_SW4 12
--#define AP81_GPIO_BTN_SW1 21
--
--#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
--#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
--
--#define AP81_CAL_DATA_ADDR 0x1fff1000
--
--static struct gpio_led ap81_leds_gpio[] __initdata = {
-- {
-- .name = "ap81:green:status",
-- .gpio = AP81_GPIO_LED_STATUS,
-- .active_low = 1,
-- }, {
-- .name = "ap81:amber:aoss",
-- .gpio = AP81_GPIO_LED_AOSS,
-- .active_low = 1,
-- }, {
-- .name = "ap81:green:wlan",
-- .gpio = AP81_GPIO_LED_WLAN,
-- .active_low = 1,
-- }, {
-- .name = "ap81:green:power",
-- .gpio = AP81_GPIO_LED_POWER,
-- .active_low = 1,
-- }
--};
--
--static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
-- {
-- .desc = "sw1",
-- .type = EV_KEY,
-- .code = BTN_0,
-- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP81_GPIO_BTN_SW1,
-- .active_low = 1,
-- } , {
-- .desc = "sw4",
-- .type = EV_KEY,
-- .code = BTN_1,
-- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP81_GPIO_BTN_SW4,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info ap81_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "m25p64",
-- }
--};
--
--static struct ath79_spi_platform_data ap81_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--static void __init ap81_setup(void)
--{
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
-- ap81_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap81_gpio_keys),
-- ap81_gpio_keys);
-- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
-- ARRAY_SIZE(ap81_spi_info));
-- ath79_register_wmac(cal_data);
-- ath79_register_usb();
--}
--
--MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
-- ap81_setup);
---- a/arch/mips/ath79/mach-db120.c
-+++ /dev/null
-@@ -1,136 +0,0 @@
--/*
-- * Atheros DB120 reference board support
-- *
-- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define DB120_GPIO_LED_WLAN_5G 12
--#define DB120_GPIO_LED_WLAN_2G 13
--#define DB120_GPIO_LED_STATUS 14
--#define DB120_GPIO_LED_WPS 15
--
--#define DB120_GPIO_BTN_WPS 16
--
--#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
--#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
--
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led db120_leds_gpio[] __initdata = {
-- {
-- .name = "db120:green:status",
-- .gpio = DB120_GPIO_LED_STATUS,
-- .active_low = 1,
-- },
-- {
-- .name = "db120:green:wps",
-- .gpio = DB120_GPIO_LED_WPS,
-- .active_low = 1,
-- },
-- {
-- .name = "db120:green:wlan-5g",
-- .gpio = DB120_GPIO_LED_WLAN_5G,
-- .active_low = 1,
-- },
-- {
-- .name = "db120:green:wlan-2g",
-- .gpio = DB120_GPIO_LED_WLAN_2G,
-- .active_low = 1,
-- },
--};
--
--static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-- {
-- .desc = "WPS button",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = DB120_GPIO_BTN_WPS,
-- .active_low = 1,
-- },
--};
--
--static struct spi_board_info db120_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "s25sl064a",
-- }
--};
--
--static struct ath79_spi_platform_data db120_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &db120_ath9k_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
-- memcpy(db120_ath9k_data.eeprom_data, eeprom,
-- sizeof(db120_ath9k_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init db120_setup(void)
--{
-- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
-- db120_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(db120_gpio_keys),
-- db120_gpio_keys);
-- ath79_register_spi(&db120_spi_data, db120_spi_info,
-- ARRAY_SIZE(db120_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
-- db120_setup);
---- a/arch/mips/ath79/mach-pb44.c
-+++ /dev/null
-@@ -1,122 +0,0 @@
--/*
-- * Atheros PB44 reference board support
-- *
-- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/i2c.h>
--#include <linux/i2c-gpio.h>
--#include <linux/platform_data/pcf857x.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "pci.h"
--
--#define PB44_GPIO_I2C_SCL 0
--#define PB44_GPIO_I2C_SDA 1
--
--#define PB44_GPIO_EXP_BASE 16
--#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
--#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
--#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
--#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10)
--
--#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
--#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
--
--static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
-- .sda_pin = PB44_GPIO_I2C_SDA,
-- .scl_pin = PB44_GPIO_I2C_SCL,
--};
--
--static struct platform_device pb44_i2c_gpio_device = {
-- .name = "i2c-gpio",
-- .id = 0,
-- .dev = {
-- .platform_data = &pb44_i2c_gpio_data,
-- }
--};
--
--static struct pcf857x_platform_data pb44_pcf857x_data = {
-- .gpio_base = PB44_GPIO_EXP_BASE,
--};
--
--static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
-- {
-- I2C_BOARD_INFO("pcf8575", 0x20),
-- .platform_data = &pb44_pcf857x_data,
-- },
--};
--
--static struct gpio_led pb44_leds_gpio[] __initdata = {
-- {
-- .name = "pb44:amber:jump1",
-- .gpio = PB44_GPIO_LED_JUMP1,
-- .active_low = 1,
-- }, {
-- .name = "pb44:green:jump2",
-- .gpio = PB44_GPIO_LED_JUMP2,
-- .active_low = 1,
-- },
--};
--
--static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
-- {
-- .desc = "soft_reset",
-- .type = EV_KEY,
-- .code = KEY_RESTART,
-- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = PB44_GPIO_SW_RESET,
-- .active_low = 1,
-- } , {
-- .desc = "jumpstart",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = PB44_GPIO_SW_JUMP,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info pb44_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "m25p64",
-- },
--};
--
--static struct ath79_spi_platform_data pb44_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--static void __init pb44_init(void)
--{
-- i2c_register_board_info(0, pb44_i2c_board_info,
-- ARRAY_SIZE(pb44_i2c_board_info));
-- platform_device_register(&pb44_i2c_gpio_device);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
-- pb44_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(pb44_gpio_keys),
-- pb44_gpio_keys);
-- ath79_register_spi(&pb44_spi_data, pb44_spi_info,
-- ARRAY_SIZE(pb44_spi_info));
-- ath79_register_usb();
-- ath79_register_pci();
--}
--
--MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
-- pb44_init);
+++ /dev/null
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c | 10 +++++-
- include/asm-generic/gpio.h | 6 ++++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -553,7 +553,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpio_device *gdev;
-@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -636,6 +638,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
+++ /dev/null
-From c038250c16cdefd6d74ad61309ba84973eceb630 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:29:46 +0100
-Subject: [PATCH 24/27] MIPS: ath79: drop pdata helpers
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/dev-common.c | 168 -------------------------
- arch/mips/ath79/dev-common.h | 18 ---
- arch/mips/ath79/dev-gpio-buttons.c | 56 ---------
- arch/mips/ath79/dev-gpio-buttons.h | 23 ----
- arch/mips/ath79/dev-leds-gpio.c | 54 ---------
- arch/mips/ath79/dev-leds-gpio.h | 21 ----
- arch/mips/ath79/dev-spi.c | 38 ------
- arch/mips/ath79/dev-spi.h | 22 ----
- arch/mips/ath79/dev-usb.c | 242 -------------------------------------
- arch/mips/ath79/dev-usb.h | 17 ---
- arch/mips/ath79/dev-wmac.c | 155 ------------------------
- arch/mips/ath79/dev-wmac.h | 17 ---
- arch/mips/ath79/setup.c | 5 -
- 13 files changed, 836 deletions(-)
- delete mode 100644 arch/mips/ath79/dev-common.c
- delete mode 100644 arch/mips/ath79/dev-common.h
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.c
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.h
- delete mode 100644 arch/mips/ath79/dev-spi.c
- delete mode 100644 arch/mips/ath79/dev-spi.h
- delete mode 100644 arch/mips/ath79/dev-usb.c
- delete mode 100644 arch/mips/ath79/dev-usb.h
- delete mode 100644 arch/mips/ath79/dev-wmac.c
- delete mode 100644 arch/mips/ath79/dev-wmac.h
-
---- a/arch/mips/ath79/dev-common.c
-+++ /dev/null
-@@ -1,168 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common devices
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/platform_data/gpio-ath79.h>
--#include <linux/serial_8250.h>
--#include <linux/clk.h>
--#include <linux/err.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-common.h"
--
--static struct resource ath79_uart_resources[] = {
-- {
-- .start = AR71XX_UART_BASE,
-- .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
-- .flags = IORESOURCE_MEM,
-- },
--};
--
--#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
--static struct plat_serial8250_port ath79_uart_data[] = {
-- {
-- .mapbase = AR71XX_UART_BASE,
-- .irq = ATH79_MISC_IRQ(3),
-- .flags = AR71XX_UART_FLAGS,
-- .iotype = UPIO_MEM32,
-- .regshift = 2,
-- }, {
-- /* terminating entry */
-- }
--};
--
--static struct platform_device ath79_uart_device = {
-- .name = "serial8250",
-- .id = PLAT8250_DEV_PLATFORM,
-- .resource = ath79_uart_resources,
-- .num_resources = ARRAY_SIZE(ath79_uart_resources),
-- .dev = {
-- .platform_data = ath79_uart_data
-- },
--};
--
--static struct resource ar933x_uart_resources[] = {
-- {
-- .start = AR933X_UART_BASE,
-- .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
-- .flags = IORESOURCE_MEM,
-- },
-- {
-- .start = ATH79_MISC_IRQ(3),
-- .end = ATH79_MISC_IRQ(3),
-- .flags = IORESOURCE_IRQ,
-- },
--};
--
--static struct platform_device ar933x_uart_device = {
-- .name = "ar933x-uart",
-- .id = -1,
-- .resource = ar933x_uart_resources,
-- .num_resources = ARRAY_SIZE(ar933x_uart_resources),
--};
--
--void __init ath79_register_uart(void)
--{
-- unsigned long uart_clk_rate;
--
-- uart_clk_rate = ath79_get_sys_clk_rate("uart");
--
-- if (soc_is_ar71xx() ||
-- soc_is_ar724x() ||
-- soc_is_ar913x() ||
-- soc_is_ar934x() ||
-- soc_is_qca953x() ||
-- soc_is_qca955x() ||
-- soc_is_qca956x() ||
-- soc_is_tp9343()) {
-- ath79_uart_data[0].uartclk = uart_clk_rate;
-- platform_device_register(&ath79_uart_device);
-- } else if (soc_is_ar933x()) {
-- platform_device_register(&ar933x_uart_device);
-- } else {
-- BUG();
-- }
--}
--
--void __init ath79_register_wdt(void)
--{
-- struct resource res;
--
-- memset(&res, 0, sizeof(res));
--
-- res.flags = IORESOURCE_MEM;
-- res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL;
-- res.end = res.start + 0x8 - 1;
--
-- platform_device_register_simple("ath79-wdt", -1, &res, 1);
--}
--
--static struct ath79_gpio_platform_data ath79_gpio_pdata;
--
--static struct resource ath79_gpio_resources[] = {
-- {
-- .flags = IORESOURCE_MEM,
-- .start = AR71XX_GPIO_BASE,
-- .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
-- },
-- {
-- .start = ATH79_MISC_IRQ(2),
-- .end = ATH79_MISC_IRQ(2),
-- .flags = IORESOURCE_IRQ,
-- },
--};
--
--static struct platform_device ath79_gpio_device = {
-- .name = "ath79-gpio",
-- .id = -1,
-- .resource = ath79_gpio_resources,
-- .num_resources = ARRAY_SIZE(ath79_gpio_resources),
-- .dev = {
-- .platform_data = &ath79_gpio_pdata
-- },
--};
--
--void __init ath79_gpio_init(void)
--{
-- if (soc_is_ar71xx()) {
-- ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
-- } else if (soc_is_ar7240()) {
-- ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
-- } else if (soc_is_ar7241() || soc_is_ar7242()) {
-- ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
-- } else if (soc_is_ar913x()) {
-- ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
-- } else if (soc_is_ar933x()) {
-- ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
-- } else if (soc_is_ar934x()) {
-- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
-- ath79_gpio_pdata.oe_inverted = 1;
-- } else if (soc_is_qca953x()) {
-- ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT;
-- ath79_gpio_pdata.oe_inverted = 1;
-- } else if (soc_is_qca955x()) {
-- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
-- ath79_gpio_pdata.oe_inverted = 1;
-- } else if (soc_is_qca956x() || soc_is_tp9343()) {
-- ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT;
-- ath79_gpio_pdata.oe_inverted = 1;
-- } else {
-- BUG();
-- }
--
-- platform_device_register(&ath79_gpio_device);
--}
---- a/arch/mips/ath79/dev-common.h
-+++ /dev/null
-@@ -1,18 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common devices
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_COMMON_H
--#define _ATH79_DEV_COMMON_H
--
--void ath79_register_uart(void);
--void ath79_register_wdt(void);
--
--#endif /* _ATH79_DEV_COMMON_H */
---- a/arch/mips/ath79/dev-gpio-buttons.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include "linux/init.h"
--#include "linux/slab.h"
--#include <linux/platform_device.h>
--
--#include "dev-gpio-buttons.h"
--
--void __init ath79_register_gpio_keys_polled(int id,
-- unsigned poll_interval,
-- unsigned nbuttons,
-- struct gpio_keys_button *buttons)
--{
-- struct platform_device *pdev;
-- struct gpio_keys_platform_data pdata;
-- struct gpio_keys_button *p;
-- int err;
--
-- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
-- if (!p)
-- return;
--
-- pdev = platform_device_alloc("gpio-keys-polled", id);
-- if (!pdev)
-- goto err_free_buttons;
--
-- memset(&pdata, 0, sizeof(pdata));
-- pdata.poll_interval = poll_interval;
-- pdata.nbuttons = nbuttons;
-- pdata.buttons = p;
--
-- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-- if (err)
-- goto err_put_pdev;
--
-- err = platform_device_add(pdev);
-- if (err)
-- goto err_put_pdev;
--
-- return;
--
--err_put_pdev:
-- platform_device_put(pdev);
--
--err_free_buttons:
-- kfree(p);
--}
---- a/arch/mips/ath79/dev-gpio-buttons.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_GPIO_BUTTONS_H
--#define _ATH79_DEV_GPIO_BUTTONS_H
--
--#include <linux/input.h>
--#include <linux/gpio_keys.h>
--
--void ath79_register_gpio_keys_polled(int id,
-- unsigned poll_interval,
-- unsigned nbuttons,
-- struct gpio_keys_button *buttons);
--
--#endif /* _ATH79_DEV_GPIO_BUTTONS_H */
---- a/arch/mips/ath79/dev-leds-gpio.c
-+++ /dev/null
-@@ -1,54 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/slab.h>
--#include <linux/platform_device.h>
--
--#include "dev-leds-gpio.h"
--
--void __init ath79_register_leds_gpio(int id,
-- unsigned num_leds,
-- struct gpio_led *leds)
--{
-- struct platform_device *pdev;
-- struct gpio_led_platform_data pdata;
-- struct gpio_led *p;
-- int err;
--
-- p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
-- if (!p)
-- return;
--
-- pdev = platform_device_alloc("leds-gpio", id);
-- if (!pdev)
-- goto err_free_leds;
--
-- memset(&pdata, 0, sizeof(pdata));
-- pdata.num_leds = num_leds;
-- pdata.leds = p;
--
-- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-- if (err)
-- goto err_put_pdev;
--
-- err = platform_device_add(pdev);
-- if (err)
-- goto err_put_pdev;
--
-- return;
--
--err_put_pdev:
-- platform_device_put(pdev);
--
--err_free_leds:
-- kfree(p);
--}
---- a/arch/mips/ath79/dev-leds-gpio.h
-+++ /dev/null
-@@ -1,21 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_LEDS_GPIO_H
--#define _ATH79_DEV_LEDS_GPIO_H
--
--#include <linux/leds.h>
--
--void ath79_register_leds_gpio(int id,
-- unsigned num_leds,
-- struct gpio_led *leds);
--
--#endif /* _ATH79_DEV_LEDS_GPIO_H */
---- a/arch/mips/ath79/dev-spi.c
-+++ /dev/null
-@@ -1,38 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-spi.h"
--
--static struct resource ath79_spi_resources[] = {
-- {
-- .start = AR71XX_SPI_BASE,
-- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
-- .flags = IORESOURCE_MEM,
-- },
--};
--
--static struct platform_device ath79_spi_device = {
-- .name = "ath79-spi",
-- .id = -1,
-- .resource = ath79_spi_resources,
-- .num_resources = ARRAY_SIZE(ath79_spi_resources),
--};
--
--void __init ath79_register_spi(struct ath79_spi_platform_data *pdata,
-- struct spi_board_info const *info,
-- unsigned n)
--{
-- spi_register_board_info(info, n);
-- ath79_spi_device.dev.platform_data = pdata;
-- platform_device_register(&ath79_spi_device);
--}
---- a/arch/mips/ath79/dev-spi.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_SPI_H
--#define _ATH79_DEV_SPI_H
--
--#include <linux/spi/spi.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
--
--void ath79_register_spi(struct ath79_spi_platform_data *pdata,
-- struct spi_board_info const *info,
-- unsigned n);
--
--#endif /* _ATH79_DEV_SPI_H */
---- a/arch/mips/ath79/dev-usb.c
-+++ /dev/null
-@@ -1,242 +0,0 @@
--/*
-- * Atheros AR7XXX/AR9XXX USB Host Controller device
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/dma-mapping.h>
--#include <linux/platform_device.h>
--#include <linux/usb/ehci_pdriver.h>
--#include <linux/usb/ohci_pdriver.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-usb.h"
--
--static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
--
--static struct usb_ohci_pdata ath79_ohci_pdata = {
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
-- .has_synopsys_hc_bug = 1,
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
-- .caps_offset = 0x100,
-- .has_tt = 1,
--};
--
--static void __init ath79_usb_register(const char *name, int id,
-- unsigned long base, unsigned long size,
-- int irq, const void *data,
-- size_t data_size)
--{
-- struct resource res[2];
-- struct platform_device *pdev;
--
-- memset(res, 0, sizeof(res));
--
-- res[0].flags = IORESOURCE_MEM;
-- res[0].start = base;
-- res[0].end = base + size - 1;
--
-- res[1].flags = IORESOURCE_IRQ;
-- res[1].start = irq;
-- res[1].end = irq;
--
-- pdev = platform_device_register_resndata(NULL, name, id,
-- res, ARRAY_SIZE(res),
-- data, data_size);
--
-- if (IS_ERR(pdev)) {
-- pr_err("ath79: unable to register USB at %08lx, err=%d\n",
-- base, (int) PTR_ERR(pdev));
-- return;
-- }
--
-- pdev->dev.dma_mask = &ath79_usb_dmamask;
-- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
--}
--
--#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
-- AR71XX_RESET_USB_PHY | \
-- AR71XX_RESET_USB_OHCI_DLL)
--
--static void __init ath79_usb_setup(void)
--{
-- void __iomem *usb_ctrl_base;
--
-- ath79_device_reset_set(AR71XX_USB_RESET_MASK);
-- mdelay(1000);
-- ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
--
-- usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
--
-- /* Turning on the Buff and Desc swap bits */
-- __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
--
-- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
-- __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
-- iounmap(usb_ctrl_base);
--
-- mdelay(900);
--
-- ath79_usb_register("ohci-platform", -1,
-- AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
-- ATH79_MISC_IRQ(6),
-- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--
-- ath79_usb_register("ehci-platform", -1,
-- AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
--}
--
--static void __init ar7240_usb_setup(void)
--{
-- void __iomem *usb_ctrl_base;
--
-- ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
-- ath79_device_reset_set(AR7240_RESET_USB_HOST);
--
-- mdelay(1000);
--
-- ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
-- ath79_device_reset_clear(AR7240_RESET_USB_HOST);
--
-- usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
--
-- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
-- __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
-- iounmap(usb_ctrl_base);
--
-- ath79_usb_register("ohci-platform", -1,
-- AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--}
--
--static void __init ar724x_usb_setup(void)
--{
-- ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR724X_RESET_USB_HOST);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR724X_RESET_USB_PHY);
-- mdelay(10);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar913x_usb_setup(void)
--{
-- ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR913X_RESET_USB_HOST);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
-- mdelay(10);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar933x_usb_setup(void)
--{
-- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR933X_RESET_USB_HOST);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
-- mdelay(10);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar934x_usb_setup(void)
--{
-- u32 bootstrap;
--
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
-- return;
--
-- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
-- udelay(1000);
--
-- ath79_device_reset_clear(AR934X_RESET_USB_PHY);
-- udelay(1000);
--
-- ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
-- udelay(1000);
--
-- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
-- udelay(1000);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init qca955x_usb_setup(void)
--{
-- ath79_usb_register("ehci-platform", 0,
-- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
-- ATH79_IP3_IRQ(0),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--
-- ath79_usb_register("ehci-platform", 1,
-- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
-- ATH79_IP3_IRQ(1),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--void __init ath79_register_usb(void)
--{
-- if (soc_is_ar71xx())
-- ath79_usb_setup();
-- else if (soc_is_ar7240())
-- ar7240_usb_setup();
-- else if (soc_is_ar7241() || soc_is_ar7242())
-- ar724x_usb_setup();
-- else if (soc_is_ar913x())
-- ar913x_usb_setup();
-- else if (soc_is_ar933x())
-- ar933x_usb_setup();
-- else if (soc_is_ar934x())
-- ar934x_usb_setup();
-- else if (soc_is_qca955x())
-- qca955x_usb_setup();
-- else
-- BUG();
--}
---- a/arch/mips/ath79/dev-usb.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X USB Host Controller support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_USB_H
--#define _ATH79_DEV_USB_H
--
--void ath79_register_usb(void);
--
--#endif /* _ATH79_DEV_USB_H */
---- a/arch/mips/ath79/dev-wmac.c
-+++ /dev/null
-@@ -1,155 +0,0 @@
--/*
-- * Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/platform_device.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-wmac.h"
--
--static struct ath9k_platform_data ath79_wmac_data;
--
--static struct resource ath79_wmac_resources[] = {
-- {
-- /* .start and .end fields are filled dynamically */
-- .flags = IORESOURCE_MEM,
-- }, {
-- /* .start and .end fields are filled dynamically */
-- .flags = IORESOURCE_IRQ,
-- },
--};
--
--static struct platform_device ath79_wmac_device = {
-- .name = "ath9k",
-- .id = -1,
-- .resource = ath79_wmac_resources,
-- .num_resources = ARRAY_SIZE(ath79_wmac_resources),
-- .dev = {
-- .platform_data = &ath79_wmac_data,
-- },
--};
--
--static void __init ar913x_wmac_setup(void)
--{
-- /* reset the WMAC */
-- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
-- mdelay(10);
--
-- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
-- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
-- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--}
--
--
--static int ar933x_wmac_reset(void)
--{
-- ath79_device_reset_set(AR933X_RESET_WMAC);
-- ath79_device_reset_clear(AR933X_RESET_WMAC);
--
-- return 0;
--}
--
--static int ar933x_r1_get_wmac_revision(void)
--{
-- return ath79_soc_rev;
--}
--
--static void __init ar933x_wmac_setup(void)
--{
-- u32 t;
--
-- ar933x_wmac_reset();
--
-- ath79_wmac_device.name = "ar933x_wmac";
--
-- ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
-- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
-- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--
-- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-- ath79_wmac_data.is_clk_25mhz = false;
-- else
-- ath79_wmac_data.is_clk_25mhz = true;
--
-- if (ath79_soc_rev == 1)
-- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
--
-- ath79_wmac_data.external_reset = ar933x_wmac_reset;
--}
--
--static void ar934x_wmac_setup(void)
--{
-- u32 t;
--
-- ath79_wmac_device.name = "ar934x_wmac";
--
-- ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
-- ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
-- t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (t & AR934X_BOOTSTRAP_REF_CLK_40)
-- ath79_wmac_data.is_clk_25mhz = false;
-- else
-- ath79_wmac_data.is_clk_25mhz = true;
--}
--
--static void qca955x_wmac_setup(void)
--{
-- u32 t;
--
-- ath79_wmac_device.name = "qca955x_wmac";
--
-- ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
-- ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
-- t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
-- if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
-- ath79_wmac_data.is_clk_25mhz = false;
-- else
-- ath79_wmac_data.is_clk_25mhz = true;
--}
--
--void __init ath79_register_wmac(u8 *cal_data)
--{
-- if (soc_is_ar913x())
-- ar913x_wmac_setup();
-- else if (soc_is_ar933x())
-- ar933x_wmac_setup();
-- else if (soc_is_ar934x())
-- ar934x_wmac_setup();
-- else if (soc_is_qca955x())
-- qca955x_wmac_setup();
-- else
-- BUG();
--
-- if (cal_data)
-- memcpy(ath79_wmac_data.eeprom_data, cal_data,
-- sizeof(ath79_wmac_data.eeprom_data));
--
-- platform_device_register(&ath79_wmac_device);
--}
---- a/arch/mips/ath79/dev-wmac.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- * Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_WMAC_H
--#define _ATH79_DEV_WMAC_H
--
--void ath79_register_wmac(u8 *cal_data);
--
--#endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -31,7 +31,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "dev-common.h"
- #include "machtypes.h"
-
- #define ATH79_SYS_TYPE_LEN 64
-@@ -316,10 +315,6 @@ static int __init ath79_setup(void)
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
- return 0;
-
-- ath79_gpio_init();
-- ath79_register_uart();
-- ath79_register_wdt();
--
- mips_machine_setup();
-
- return 0;
+++ /dev/null
-From 08b9cad7da5d981d595fe6d76e9675f85e23e688 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:57:15 +0100
-Subject: [PATCH 25/27] MIPS: ath79: drop irq.c
-
-all IRQ init code will flow via OF based irq chips.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile | 2 +-
- arch/mips/ath79/irq.c | 285 -----------------------------------------------
- arch/mips/ath79/setup.c | 6 +
- 3 files changed, 7 insertions(+), 286 deletions(-)
- delete mode 100644 arch/mips/ath79/irq.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -8,7 +8,7 @@
- # under the terms of the GNU General Public License version 2 as published
- # by the Free Software Foundation.
-
--obj-y := prom.o setup.o irq.o common.o clock.o
-+obj-y := prom.o setup.o common.o clock.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- a/arch/mips/ath79/irq.c
-+++ /dev/null
-@@ -1,285 +0,0 @@
--/*
-- * Atheros AR71xx/AR724x/AR913x specific interrupt handling
-- *
-- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/irqchip.h>
--#include <linux/of_irq.h>
--
--#include <asm/irq_cpu.h>
--#include <asm/mipsregs.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "machtypes.h"
--
--
--static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
--
-- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
-- ath79_ddr_wb_flush(3);
-- generic_handle_irq(ATH79_IP2_IRQ(0));
-- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
-- ath79_ddr_wb_flush(4);
-- generic_handle_irq(ATH79_IP2_IRQ(1));
-- } else {
-- spurious_interrupt();
-- }
--}
--
--static void ar934x_ip2_irq_init(void)
--{
-- int i;
--
-- for (i = ATH79_IP2_IRQ_BASE;
-- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
--}
--
--static void qca953x_ip2_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
--
-- if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
-- ath79_ddr_wb_flush(3);
-- generic_handle_irq(ATH79_IP2_IRQ(0));
-- } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
-- ath79_ddr_wb_flush(4);
-- generic_handle_irq(ATH79_IP2_IRQ(1));
-- } else {
-- spurious_interrupt();
-- }
--}
--
--static void qca953x_irq_init(void)
--{
-- int i;
--
-- for (i = ATH79_IP2_IRQ_BASE;
-- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
--}
--
--static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-- status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
--
-- if (status == 0) {
-- spurious_interrupt();
-- return;
-- }
--
-- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP2_IRQ(0));
-- }
--
-- if (status & QCA955X_EXT_INT_WMAC_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP2_IRQ(1));
-- }
--}
--
--static void qca955x_ip3_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-- status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
-- QCA955X_EXT_INT_USB1 |
-- QCA955X_EXT_INT_USB2;
--
-- if (status == 0) {
-- spurious_interrupt();
-- return;
-- }
--
-- if (status & QCA955X_EXT_INT_USB1) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(0));
-- }
--
-- if (status & QCA955X_EXT_INT_USB2) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(1));
-- }
--
-- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(2));
-- }
--}
--
--static void qca955x_irq_init(void)
--{
-- int i;
--
-- for (i = ATH79_IP2_IRQ_BASE;
-- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
--
-- for (i = ATH79_IP3_IRQ_BASE;
-- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
--}
--
--static void qca956x_ip2_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-- status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
--
-- if (status == 0) {
-- spurious_interrupt();
-- return;
-- }
--
-- if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP2_IRQ(0));
-- }
--
-- if (status & QCA956X_EXT_INT_WMAC_ALL) {
-- /* TODO: flsuh DDR? */
-- generic_handle_irq(ATH79_IP2_IRQ(1));
-- }
--}
--
--static void qca956x_ip3_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-- status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
-- QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
--
-- if (status == 0) {
-- spurious_interrupt();
-- return;
-- }
--
-- if (status & QCA956X_EXT_INT_USB1) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(0));
-- }
--
-- if (status & QCA956X_EXT_INT_USB2) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(1));
-- }
--
-- if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(2));
-- }
--}
--
--static void qca956x_enable_timer_cb(void) {
-- u32 misc;
--
-- misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
-- misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
-- ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
--}
--
--static void qca956x_irq_init(void)
--{
-- int i;
--
-- for (i = ATH79_IP2_IRQ_BASE;
-- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
--
-- for (i = ATH79_IP3_IRQ_BASE;
-- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
--
-- /* QCA956x timer init workaround has to be applied right before setting
-- * up the clock. Else, there will be no jiffies */
-- late_time_init = &qca956x_enable_timer_cb;
--}
--
--void __init arch_init_irq(void)
--{
-- unsigned irq_wb_chan2 = -1;
-- unsigned irq_wb_chan3 = -1;
-- bool misc_is_ar71xx;
--
-- if (mips_machtype == ATH79_MACH_GENERIC_OF) {
-- irqchip_init();
-- return;
-- }
--
-- if (soc_is_ar71xx() || soc_is_ar724x() ||
-- soc_is_ar913x() || soc_is_ar933x()) {
-- irq_wb_chan2 = 3;
-- irq_wb_chan3 = 2;
-- } else if (soc_is_ar934x() || soc_is_qca953x()) {
-- irq_wb_chan3 = 2;
-- }
--
-- ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
--
-- if (soc_is_ar71xx() || soc_is_ar913x())
-- misc_is_ar71xx = true;
-- else if (soc_is_ar724x() ||
-- soc_is_ar933x() ||
-- soc_is_ar934x() ||
-- soc_is_qca953x() ||
-- soc_is_qca955x() ||
-- soc_is_qca956x() ||
-- soc_is_tp9343())
-- misc_is_ar71xx = false;
-- else
-- BUG();
-- ath79_misc_irq_init(
-- ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
-- ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
--
-- if (soc_is_ar934x())
-- ar934x_ip2_irq_init();
-- else if (soc_is_qca953x())
-- qca953x_irq_init();
-- else if (soc_is_qca955x())
-- qca955x_irq_init();
-- else if (soc_is_qca956x() || soc_is_tp9343())
-- qca956x_irq_init();
--}
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -19,6 +19,7 @@
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/of_fdt.h>
-+#include <linux/irqchip.h>
-
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
-@@ -310,6 +311,11 @@ void __init plat_time_init(void)
- mips_hpt_frequency = cpu_clk_rate / 2;
- }
-
-+void __init arch_init_irq(void)
-+{
-+ irqchip_init();
-+}
-+
- static int __init ath79_setup(void)
- {
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
+++ /dev/null
-From deda44895d289a72a235359fc21f8a62ea44dc1c Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:33:26 +0100
-Subject: [PATCH 26/27] MIPS: ath79: sanitize Kconfig symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 2 ++
- arch/mips/ath79/Kconfig | 48 +++++-------------------------------------------
- arch/mips/ath79/Makefile | 10 ----------
- arch/mips/pci/Makefile | 2 +-
- 4 files changed, 8 insertions(+), 54 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -203,6 +203,8 @@ config ATH79
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT_UART_PROM
-+ select HW_HAS_PCI
-+ select USB_ARCH_HAS_EHCI
- select USE_OF
- help
- Support for the Atheros AR71XX/AR724X/AR913X SoCs.
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,52 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
-
--config SOC_AR71XX
-- select HW_HAS_PCI
-- def_bool n
--
--config SOC_AR724X
-- select HW_HAS_PCI
-- select PCI_AR724X if PCI
-- def_bool n
--
--config SOC_AR913X
-- def_bool n
--
--config SOC_AR933X
-- def_bool n
--
--config SOC_AR934X
-- select HW_HAS_PCI
-- select PCI_AR724X if PCI
-- def_bool n
--
--config SOC_QCA953X
-- select USB_ARCH_HAS_EHCI
-- def_bool n
--
--config SOC_QCA955X
-- select HW_HAS_PCI
-- select PCI_AR724X if PCI
-+config PCI_AR71XX
-+ bool "PCI support for AR7100 type SoCs"
-+ depends on PCI
- def_bool n
-
- config PCI_AR724X
-- def_bool n
--
--config ATH79_DEV_GPIO_BUTTONS
-- def_bool n
--
--config ATH79_DEV_LEDS_GPIO
-- def_bool n
--
--config ATH79_DEV_SPI
-- def_bool n
--
--config ATH79_DEV_USB
-- def_bool n
--
--config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
-+ bool "PCI support for AR724x type SoCs"
-+ depends on PCI
- def_bool n
-
- endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,13 +11,3 @@
- obj-y := prom.o setup.o common.o clock.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--
--#
--# Devices
--#
--obj-y += dev-common.o
--obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
--obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
--obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
--obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
--obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
- obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
--obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
-+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
- obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
- #
+++ /dev/null
-From e03edbc8e68063b3fca7457fa048d8abe0045f1f Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:15:54 +0100
-Subject: [PATCH 27/27] MIPS: ath79: drop mips_machine support
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 1 -
- arch/mips/ath79/machtypes.h | 28 -----------------
- arch/mips/ath79/setup.c | 74 ++++++---------------------------------------
- 3 files changed, 10 insertions(+), 93 deletions(-)
- delete mode 100644 arch/mips/ath79/machtypes.h
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -196,7 +196,6 @@ config ATH79
- select COMMON_CLK
- select CLKDEV_LOOKUP
- select IRQ_MIPS_CPU
-- select MIPS_MACHINE
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_32BIT_KERNEL
---- a/arch/mips/ath79/machtypes.h
-+++ /dev/null
-@@ -1,28 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X machine type definitions
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_MACHTYPE_H
--#define _ATH79_MACHTYPE_H
--
--#include <asm/mips_machine.h>
--
--enum ath79_mach_type {
-- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
-- ATH79_MACH_GENERIC = 0,
-- ATH79_MACH_AP121, /* Atheros AP121 reference board */
-- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
-- ATH79_MACH_AP81, /* Atheros AP81 reference board */
-- ATH79_MACH_DB120, /* Atheros DB120 reference board */
-- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
--};
--
--#endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -32,7 +32,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "machtypes.h"
-
- #define ATH79_SYS_TYPE_LEN 64
-
-@@ -235,25 +234,21 @@ void __init plat_mem_setup(void)
- else if (fw_passed_dtb)
- __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
-
-- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
-- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-- AR71XX_RESET_SIZE);
-- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-- AR71XX_PLL_SIZE);
-- ath79_detect_sys_type();
-- ath79_ddr_ctrl_init();
-+ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-+ AR71XX_RESET_SIZE);
-+ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-+ AR71XX_PLL_SIZE);
-+ ath79_detect_sys_type();
-+ ath79_ddr_ctrl_init();
-
-- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
--
-- /* OF machines should use the reset driver */
-- _machine_restart = ath79_restart;
-- }
-+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
-
-+ _machine_restart = ath79_restart;
- _machine_halt = ath79_halt;
- pm_power_off = ath79_halt;
- }
-
--static void __init ath79_of_plat_time_init(void)
-+void __init plat_time_init(void)
- {
- struct device_node *np;
- struct clk *clk;
-@@ -283,62 +278,12 @@ static void __init ath79_of_plat_time_in
- clk_put(clk);
- }
-
--void __init plat_time_init(void)
--{
-- unsigned long cpu_clk_rate;
-- unsigned long ahb_clk_rate;
-- unsigned long ddr_clk_rate;
-- unsigned long ref_clk_rate;
--
-- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
-- ath79_of_plat_time_init();
-- return;
-- }
--
-- ath79_clocks_init();
--
-- cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
-- ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
-- ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
-- ref_clk_rate = ath79_get_sys_clk_rate("ref");
--
-- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
-- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
-- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
-- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
-- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
--
-- mips_hpt_frequency = cpu_clk_rate / 2;
--}
--
- void __init arch_init_irq(void)
- {
- irqchip_init();
- }
-
--static int __init ath79_setup(void)
--{
-- if (mips_machtype == ATH79_MACH_GENERIC_OF)
-- return 0;
--
-- mips_machine_setup();
--
-- return 0;
--}
--
--arch_initcall(ath79_setup);
--
- void __init device_tree_init(void)
- {
- unflatten_and_copy_device_tree();
- }
--
--MIPS_MACHINE(ATH79_MACH_GENERIC,
-- "Generic",
-- "Generic AR71XX/AR724X/AR913X based board",
-- NULL);
--
--MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
-- "DTB",
-- "Generic AR71XX/AR724X/AR913X based board (DT)",
-- NULL);
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -26,7 +26,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "machtypes.h"
-
- #define AR71XX_BASE_FREQ 40000000
- #define AR724X_BASE_FREQ 40000000
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:19:26 +0100
-Subject: [PATCH] MIPS: ath79: add helpers for setting clocks and expose
- the ref clock
-
-Preparation for transitioning legacy the legacy clock setup code over
-to OF.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -36,20 +36,46 @@ static struct clk_onecell_data clk_data
- .clk_num = ARRAY_SIZE(clks),
- };
-
--static struct clk *__init ath79_add_sys_clkdev(
-- const char *id, unsigned long rate)
-+static const char * const clk_names[ATH79_CLK_END] = {
-+ [ATH79_CLK_CPU] = "cpu",
-+ [ATH79_CLK_DDR] = "ddr",
-+ [ATH79_CLK_AHB] = "ahb",
-+ [ATH79_CLK_REF] = "ref",
-+};
-+
-+static const char * __init ath79_clk_name(int type)
- {
-- struct clk *clk;
-- int err;
-+ BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]);
-+ return clk_names[type];
-+}
-
-- clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+static void __init __ath79_set_clk(int type, const char *name, struct clk *clk)
-+{
- if (IS_ERR(clk))
-- panic("failed to allocate %s clock structure", id);
-+ panic("failed to allocate %s clock structure", clk_names[type]);
-
-- err = clk_register_clkdev(clk, id, NULL);
-- if (err)
-- panic("unable to register %s clock device", id);
-+ clks[type] = clk;
-+ clk_register_clkdev(clk, name, NULL);
-+}
-
-+static struct clk * __init ath79_set_clk(int type, unsigned long rate)
-+{
-+ const char *name = ath79_clk_name(type);
-+ struct clk *clk;
-+
-+ clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate);
-+ __ath79_set_clk(type, name, clk);
-+ return clk;
-+}
-+
-+static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
-+ unsigned int mult, unsigned int div)
-+{
-+ const char *name = ath79_clk_name(type);
-+ struct clk *clk;
-+
-+ clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div);
-+ __ath79_set_clk(type, name, clk);
- return clk;
- }
-
-@@ -79,27 +105,15 @@ static void __init ar71xx_clocks_init(vo
- div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- ahb_rate = cpu_rate / div;
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-
--static struct clk * __init ath79_reg_ffclk(const char *name,
-- const char *parent_name, unsigned int mult, unsigned int div)
--{
-- struct clk *clk;
--
-- clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
-- if (IS_ERR(clk))
-- panic("failed to allocate %s clock structure", name);
--
-- return clk;
--}
--
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
- {
- u32 pll;
-@@ -113,24 +127,19 @@ static void __init ar724x_clk_init(struc
- ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
- ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-
-- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
-- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
-- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
-+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div);
-+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div);
-+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
-
- static void __init ar724x_clocks_init(void)
- {
- struct clk *ref_clk;
-
-- ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
-+ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
-
- ar724x_clk_init(ref_clk, ath79_pll_base);
-
-- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
-- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-@@ -185,12 +194,12 @@ static void __init ar9330_clk_init(struc
- AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
- }
-
-- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
-- ninit_mul, ref_div * out_div * cpu_div);
-- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
-- ninit_mul, ref_div * out_div * ddr_div);
-- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
-- ninit_mul, ref_div * out_div * ahb_div);
-+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul,
-+ ref_div * out_div * cpu_div);
-+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul,
-+ ref_div * out_div * ddr_div);
-+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul,
-+ ref_div * out_div * ahb_div);
- }
-
- static void __init ar933x_clocks_init(void)
-@@ -205,15 +214,10 @@ static void __init ar933x_clocks_init(vo
- else
- ref_rate = (25 * 1000 * 1000);
-
-- ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
-+ ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
-
- ar9330_clk_init(ref_clk, ath79_pll_base);
-
-- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
-- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
- }
-@@ -343,10 +347,10 @@ static void __init ar934x_clocks_init(vo
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
-@@ -430,10 +434,10 @@ static void __init qca953x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- ath79_add_sys_clkdev("cpu", cpu_rate);
-- ath79_add_sys_clkdev("ddr", ddr_rate);
-- ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
-@@ -515,10 +519,10 @@ static void __init qca955x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
-@@ -609,10 +613,10 @@ static void __init qca956x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- ath79_add_sys_clkdev("cpu", cpu_rate);
-- ath79_add_sys_clkdev("ddr", ddr_rate);
-- ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -13,7 +13,8 @@
- #define ATH79_CLK_CPU 0
- #define ATH79_CLK_DDR 1
- #define ATH79_CLK_AHB 2
-+#define ATH79_CLK_REF 3
-
--#define ATH79_CLK_END 3
-+#define ATH79_CLK_END 4
-
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:22:43 +0100
-Subject: [PATCH] MIPS: ath79: move legacy "wdt" and "uart" clock aliases
- out of soc init
-
-Preparation for reusing functions for DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -109,9 +109,6 @@ static void __init ar71xx_clocks_init(vo
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ahb", NULL);
-- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -139,9 +136,6 @@ static void __init ar724x_clocks_init(vo
- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
-
- ar724x_clk_init(ref_clk, ath79_pll_base);
--
-- clk_add_alias("wdt", NULL, "ahb", NULL);
-- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -217,9 +211,6 @@ static void __init ar933x_clocks_init(vo
- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
-
- ar9330_clk_init(ref_clk, ath79_pll_base);
--
-- clk_add_alias("wdt", NULL, "ahb", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
-@@ -352,9 +343,6 @@ static void __init ar934x_clocks_init(vo
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
--
- iounmap(dpll_base);
- }
-
-@@ -438,9 +426,6 @@ static void __init qca953x_clocks_init(v
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- static void __init qca955x_clocks_init(void)
-@@ -523,9 +508,6 @@ static void __init qca955x_clocks_init(v
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- static void __init qca956x_clocks_init(void)
-@@ -617,13 +599,13 @@ static void __init qca956x_clocks_init(v
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- void __init ath79_clocks_init(void)
- {
-+ const char *wdt;
-+ const char *uart;
-+
- if (soc_is_ar71xx())
- ar71xx_clocks_init();
- else if (soc_is_ar724x() || soc_is_ar913x())
-@@ -640,6 +622,20 @@ void __init ath79_clocks_init(void)
- qca956x_clocks_init();
- else
- BUG();
-+
-+ if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
-+ wdt = "ahb";
-+ uart = "ahb";
-+ } else if (soc_is_ar933x()) {
-+ wdt = "ahb";
-+ uart = "ref";
-+ } else {
-+ wdt = "ref";
-+ uart = "ref";
-+ }
-+
-+ clk_add_alias("wdt", NULL, wdt, NULL);
-+ clk_add_alias("uart", NULL, uart, NULL);
- }
-
- unsigned long __init
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:23:20 +0100
-Subject: [PATCH] MIPS: ath79: pass PLL base to clock init functions
-
-Preparation for passing the mapped base via DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -79,7 +79,7 @@ static struct clk * __init ath79_set_ff_
- return clk;
- }
-
--static void __init ar71xx_clocks_init(void)
-+static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -91,7 +91,7 @@ static void __init ar71xx_clocks_init(vo
-
- ref_rate = AR71XX_BASE_FREQ;
-
-- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
-+ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
-
- div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
- freq = div * ref_rate;
-@@ -129,13 +129,13 @@ static void __init ar724x_clk_init(struc
- ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
-
--static void __init ar724x_clocks_init(void)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
- struct clk *ref_clk;
-
- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
-
-- ar724x_clk_init(ref_clk, ath79_pll_base);
-+ ar724x_clk_init(ref_clk, pll_base);
- }
-
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -196,7 +196,7 @@ static void __init ar9330_clk_init(struc
- ref_div * out_div * ahb_div);
- }
-
--static void __init ar933x_clocks_init(void)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
- struct clk *ref_clk;
- unsigned long ref_rate;
-@@ -233,7 +233,7 @@ static u32 __init ar934x_get_pll_freq(u3
- return ret;
- }
-
--static void __init ar934x_clocks_init(void)
-+static void __init ar934x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -264,7 +264,7 @@ static void __init ar934x_clocks_init(vo
- AR934X_SRIF_DPLL1_REFDIV_MASK;
- frac = 1 << 18;
- } else {
-- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -291,7 +291,7 @@ static void __init ar934x_clocks_init(vo
- AR934X_SRIF_DPLL1_REFDIV_MASK;
- frac = 1 << 18;
- } else {
-- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -306,7 +306,7 @@ static void __init ar934x_clocks_init(vo
- ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
- nfrac, frac, out_div);
-
-- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -346,7 +346,7 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
--static void __init qca953x_clocks_init(void)
-+static void __init qca953x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -362,7 +362,7 @@ static void __init qca953x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -376,7 +376,7 @@ static void __init qca953x_clocks_init(v
- cpu_pll += frac * (ref_rate >> 6) / ref_div;
- cpu_pll /= (1 << out_div);
-
-- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -390,7 +390,7 @@ static void __init qca953x_clocks_init(v
- ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
- ddr_pll /= (1 << out_div);
-
-- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -428,7 +428,7 @@ static void __init qca953x_clocks_init(v
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--static void __init qca955x_clocks_init(void)
-+static void __init qca955x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -444,7 +444,7 @@ static void __init qca955x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -458,7 +458,7 @@ static void __init qca955x_clocks_init(v
- cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
- cpu_pll /= (1 << out_div);
-
-- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -472,7 +472,7 @@ static void __init qca955x_clocks_init(v
- ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
- ddr_pll /= (1 << out_div);
-
-- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -510,7 +510,7 @@ static void __init qca955x_clocks_init(v
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--static void __init qca956x_clocks_init(void)
-+static void __init qca956x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -526,13 +526,13 @@ static void __init qca956x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
-
-- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
- nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
- QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
- hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-@@ -545,12 +545,12 @@ static void __init qca956x_clocks_init(v
- cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
- cpu_pll /= (1 << out_div);
-
-- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
-- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
- nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
- QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
- hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-@@ -563,7 +563,7 @@ static void __init qca956x_clocks_init(v
- ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
- ddr_pll /= (1 << out_div);
-
-- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -607,19 +607,19 @@ void __init ath79_clocks_init(void)
- const char *uart;
-
- if (soc_is_ar71xx())
-- ar71xx_clocks_init();
-+ ar71xx_clocks_init(ath79_pll_base);
- else if (soc_is_ar724x() || soc_is_ar913x())
-- ar724x_clocks_init();
-+ ar724x_clocks_init(ath79_pll_base);
- else if (soc_is_ar933x())
-- ar933x_clocks_init();
-+ ar933x_clocks_init(ath79_pll_base);
- else if (soc_is_ar934x())
-- ar934x_clocks_init();
-+ ar934x_clocks_init(ath79_pll_base);
- else if (soc_is_qca953x())
-- qca953x_clocks_init();
-+ qca953x_clocks_init(ath79_pll_base);
- else if (soc_is_qca955x())
-- qca955x_clocks_init();
-+ qca955x_clocks_init(ath79_pll_base);
- else if (soc_is_qca956x() || soc_is_tp9343())
-- qca956x_clocks_init();
-+ qca956x_clocks_init(ath79_pll_base);
- else
- BUG();
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:24:07 +0100
-Subject: [PATCH] MIPS: ath79: make specifying the reference clock in DT
- optional
-
-It can be autodetected for many SoCs using the strapping options.
-If the clock is specified in DT, the autodetected value is ignored
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -79,6 +79,18 @@ static struct clk * __init ath79_set_ff_
- return clk;
- }
-
-+static unsigned long __init ath79_setup_ref_clk(unsigned long rate)
-+{
-+ struct clk *clk = clks[ATH79_CLK_REF];
-+
-+ if (clk)
-+ rate = clk_get_rate(clk);
-+ else
-+ clk = ath79_set_clk(ATH79_CLK_REF, rate);
-+
-+ return rate;
-+}
-+
- static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
-@@ -89,7 +101,7 @@ static void __init ar71xx_clocks_init(vo
- u32 freq;
- u32 div;
-
-- ref_rate = AR71XX_BASE_FREQ;
-+ ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ);
-
- pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
-
-@@ -105,16 +117,17 @@ static void __init ar71xx_clocks_init(vo
- div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- ahb_rate = cpu_rate / div;
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
-- u32 pll;
- u32 mult, div, ddr_div, ahb_div;
-+ u32 pll;
-+
-+ ath79_setup_ref_clk(AR71XX_BASE_FREQ);
-
- pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
-
-@@ -129,17 +142,9 @@ static void __init ar724x_clk_init(struc
- ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
-
--static void __init ar724x_clocks_init(void __iomem *pll_base)
--{
-- struct clk *ref_clk;
--
-- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
--
-- ar724x_clk_init(ref_clk, pll_base);
--}
--
--static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
-+ unsigned long ref_rate;
- u32 clock_ctrl;
- u32 ref_div;
- u32 ninit_mul;
-@@ -148,6 +153,15 @@ static void __init ar9330_clk_init(struc
- u32 cpu_div;
- u32 ddr_div;
- u32 ahb_div;
-+ u32 t;
-+
-+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-+ ref_rate = (40 * 1000 * 1000);
-+ else
-+ ref_rate = (25 * 1000 * 1000);
-+
-+ ath79_setup_ref_clk(ref_rate);
-
- clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
- if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-@@ -196,23 +210,6 @@ static void __init ar9330_clk_init(struc
- ref_div * out_div * ahb_div);
- }
-
--static void __init ar933x_clocks_init(void __iomem *pll_base)
--{
-- struct clk *ref_clk;
-- unsigned long ref_rate;
-- u32 t;
--
-- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-- ref_rate = (40 * 1000 * 1000);
-- else
-- ref_rate = (25 * 1000 * 1000);
--
-- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
--
-- ar9330_clk_init(ref_clk, ath79_pll_base);
--}
--
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
- u32 frac, u32 out_div)
- {
-@@ -252,6 +249,8 @@ static void __init ar934x_clocks_init(vo
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
- if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
- out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
-@@ -338,7 +337,6 @@ static void __init ar934x_clocks_init(vo
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -362,6 +360,8 @@ static void __init qca953x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -422,7 +422,6 @@ static void __init qca953x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -444,6 +443,8 @@ static void __init qca955x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -504,7 +505,6 @@ static void __init qca955x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -526,6 +526,8 @@ static void __init qca956x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -595,7 +597,6 @@ static void __init qca956x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -671,10 +672,8 @@ static void __init ath79_clocks_init_dt_
- void __iomem *pll_base;
-
- ref_clk = of_clk_get(np, 0);
-- if (IS_ERR(ref_clk)) {
-- pr_err("%pOF: of_clk_get failed\n", np);
-- goto err;
-- }
-+ if (!IS_ERR(ref_clk))
-+ clks[ATH79_CLK_REF] = ref_clk;
-
- pll_base = of_iomap(np, 0);
- if (!pll_base) {
-@@ -683,9 +682,9 @@ static void __init ath79_clocks_init_dt_
- }
-
- if (of_device_is_compatible(np, "qca,ar9130-pll"))
-- ar724x_clk_init(ref_clk, pll_base);
-+ ar724x_clocks_init(pll_base);
- else if (of_device_is_compatible(np, "qca,ar9330-pll"))
-- ar9330_clk_init(ref_clk, pll_base);
-+ ar933x_clocks_init(pll_base);
- else {
- pr_err("%pOF: could not find any appropriate clk_init()\n", np);
- goto err_iounmap;
-@@ -703,9 +702,6 @@ err_iounmap:
-
- err_clk:
- clk_put(ref_clk);
--
--err:
-- return;
- }
- CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
- CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:26:27 +0100
-Subject: [PATCH] MIPS: ath79: support setting up clock via DT on all SoC
- types
-
-Use the same functions as the legacy code
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -658,16 +658,6 @@ ath79_get_sys_clk_rate(const char *id)
- #ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
-- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
--}
--
--CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
--
--static void __init ath79_clocks_init_dt_ng(struct device_node *np)
--{
- struct clk *ref_clk;
- void __iomem *pll_base;
-
-@@ -681,14 +671,21 @@ static void __init ath79_clocks_init_dt_
- goto err_clk;
- }
-
-- if (of_device_is_compatible(np, "qca,ar9130-pll"))
-+ if (of_device_is_compatible(np, "qca,ar7100-pll"))
-+ ar71xx_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,ar7240-pll") ||
-+ of_device_is_compatible(np, "qca,ar9130-pll"))
- ar724x_clocks_init(pll_base);
- else if (of_device_is_compatible(np, "qca,ar9330-pll"))
- ar933x_clocks_init(pll_base);
-- else {
-- pr_err("%pOF: could not find any appropriate clk_init()\n", np);
-- goto err_iounmap;
-- }
-+ else if (of_device_is_compatible(np, "qca,ar9340-pll"))
-+ ar934x_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,qca9530-pll"))
-+ qca953x_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,qca9550-pll"))
-+ qca955x_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,qca9560-pll"))
-+ qca956x_clocks_init(pll_base);
-
- if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- pr_err("%pOF: could not register clk provider\n", np);
-@@ -703,6 +700,14 @@ err_iounmap:
- err_clk:
- clk_put(ref_clk);
- }
--CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
--CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
-+
-+CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
-+
- #endif
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:27:28 +0100
-Subject: [PATCH] MIPS: ath79: export switch MDIO reference clock
-
-On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
-clock. If that feature is not used, it defaults to the main reference clock,
-like on all other SoC.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -41,6 +41,7 @@ static const char * const clk_names[ATH7
- [ATH79_CLK_DDR] = "ddr",
- [ATH79_CLK_AHB] = "ahb",
- [ATH79_CLK_REF] = "ref",
-+ [ATH79_CLK_MDIO] = "mdio",
- };
-
- static const char * __init ath79_clk_name(int type)
-@@ -341,6 +342,10 @@ static void __init ar934x_clocks_init(vo
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
-+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
-+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
-+ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
-+
- iounmap(dpll_base);
- }
-
-@@ -687,6 +692,9 @@ static void __init ath79_clocks_init_dt(
- else if (of_device_is_compatible(np, "qca,qca9560-pll"))
- qca956x_clocks_init(pll_base);
-
-+ if (!clks[ATH79_CLK_MDIO])
-+ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
-+
- if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- pr_err("%pOF: could not register clk provider\n", np);
- goto err_iounmap;
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -14,7 +14,8 @@
- #define ATH79_CLK_DDR 1
- #define ATH79_CLK_AHB 2
- #define ATH79_CLK_REF 3
-+#define ATH79_CLK_MDIO 4
-
--#define ATH79_CLK_END 4
-+#define ATH79_CLK_END 5
-
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
+++ /dev/null
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio
- .remove = ath79_gpio_remove,
- };
-
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+ return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
-
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -194,6 +194,12 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_TPLINK_PARTS
-+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+ depends on ATH79
-+ ---help---
-+ TBD.
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y += parsers/
-+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
+++ /dev/null
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- bool "Atheros devices"
- default y
-- depends on PCI
-+ depends on (PCI || ATH79)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y.
-
-@@ -78,4 +78,6 @@ config ALX
- To compile this driver as a module, choose M here. The module
- will be called alx.
-
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
+++ /dev/null
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -83,8 +83,8 @@ obj-$(CONFIG_SCSI) += scsi/
- obj-y += nvme/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPMI) += spmi/
- obj-$(CONFIG_HSI) += hsi/
- obj-y += net/
+++ /dev/null
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7
- /* save CTRL register */
- sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
- sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
--
-- /* TODO: setup speed? */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
- }
-
- static void ath79_spi_disable(struct ath79_spi *sp)
-@@ -204,6 +201,38 @@ static u32 ath79_spi_txrx_mode0(struct s
- return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
-
-+static bool ath79_spi_flash_read_supported(struct spi_device *spi)
-+{
-+ if (spi->chip_select || gpio_is_valid(spi->cs_gpio))
-+ return false;
-+
-+ return true;
-+}
-+
-+static int ath79_spi_read_flash_data(struct spi_device *spi,
-+ struct spi_flash_read_message *msg)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+
-+ if (msg->addr_width > 3)
-+ return -EOPNOTSUPP;
-+
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+ memcpy_fromio(msg->buf, sp->base + msg->from, msg->len);
-+
-+ /* enable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+ /* restore IOC register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+ msg->retlen = msg->len;
-+
-+ return 0;
-+}
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -232,6 +261,8 @@ static int ath79_spi_probe(struct platfo
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
- }
-+ master->spi_flash_read = ath79_spi_read_flash_data;
-+ master->flash_read_supported = ath79_spi_flash_read_supported;
-
- sp->bitbang.master = master;
- sp->bitbang.chipselect = ath79_spi_chipselect;
+++ /dev/null
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI_AR71XX
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -73,6 +73,45 @@ static const u32 ar71xx_pci_read_mask[8]
- 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
- };
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
- {
- u32 t;
-@@ -384,6 +423,9 @@ static int ar71xx_pci_probe(struct platf
-
- register_pci_controller(&apc->pci_ctrl);
-
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
-+
- return 0;
- }
-
+++ /dev/null
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci)
- command |= CMD_RESET;
- dbg_cmd (ehci, "reset", command);
- ehci_writel(ehci, command, &ehci->regs->command);
-+
-+ if (ehci->qca_force_host_mode) {
-+ u32 usbmode;
-+
-+ udelay(1000);
-+
-+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
-+ usbmode |= USBMODE_CM_HC | (1 << 4);
-+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
-+
-+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->usbmode));
-+ }
-+
-+ if (ehci->qca_force_16bit_ptw) {
-+ u32 port_status;
-+
-+ udelay(1000);
-+
-+ /* enable 16-bit UTMI interface */
-+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+ port_status |= BIT(28);
-+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
-+
-+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->port_status[0]));
-+ }
-+
-+ if (ehci->reset_notifier)
-+ ehci->reset_notifier(ehci_to_hcd(ehci));
-+
- ehci->rh_state = EHCI_RH_HALTED;
- ehci->next_statechange = jiffies;
- retval = ehci_handshake(ehci, &ehci->regs->command,
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -232,6 +232,10 @@ struct ehci_hcd { /* one per controlle
- unsigned need_oc_pp_cycle:1; /* MPC834X port power */
- unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */
-+
-+ void (*reset_notifier)(struct usb_hcd *hcd);
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,8 @@ struct usb_ehci_pdata {
- unsigned reset_on_resume:1;
- unsigned dma_mask_64:1;
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1;
-
- /* Turn on all power and clocks */
- int (*power_on)(struct platform_device *pdev);
-@@ -59,6 +61,7 @@ struct usb_ehci_pdata {
- * turn off everything else */
- void (*power_suspend)(struct platform_device *pdev);
- int (*pre_setup)(struct usb_hcd *hcd);
-+ void (*reset_notifier)(struct platform_device *pdev);
- };
-
- #endif /* __USB_CORE_EHCI_PDRIVER_H */
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -53,6 +53,14 @@ struct ehci_platform_priv {
-
- static const char hcd_name[] = "ehci-platform";
-
-+static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
-+{
-+ struct platform_device *pdev = to_platform_device(hcd->self.controller);
-+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
-+
-+ pdata->reset_notifier(pdev);
-+}
-+
- static int ehci_platform_reset(struct usb_hcd *hcd)
- {
- struct platform_device *pdev = to_platform_device(hcd->self.controller);
-@@ -270,6 +278,13 @@ static int ehci_platform_probe(struct pl
- priv->reset_on_resume = true;
- if (pdata->ignore_oc)
- ehci->ignore_oc = 1;
-+ if (pdata->qca_force_host_mode)
-+ ehci->qca_force_host_mode = 1;
-+ if (pdata->qca_force_16bit_ptw)
-+ ehci->qca_force_16bit_ptw = 1;
-+
-+ if (pdata->reset_notifier)
-+ ehci->reset_notifier = ehci_platform_reset_notifier;
-
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- if (ehci->big_endian_mmio) {
+++ /dev/null
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-- int ret, i;
-+ int ret;
-
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero, if this
-- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
-- */
-- if (mdiobb_get_bit(ctrl) != 0 &&
-- !(bus->phy_ignore_ta_mask & (1 << phy))) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
+++ /dev/null
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/phy/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -17,6 +17,7 @@
- * kind, whether express or implied.
- */
-
-+#include <linux/irqflags.h>
- #include <linux/module.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
-@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
- int ret;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return ret;
- }
-
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return 0;
- }
-
+++ /dev/null
-Add support for configuring AT803x GPIO reset via platform data.
-This is necessary, because ath79 is not converted to device tree yet.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/include/linux/platform_data/phy-at803x.h
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -6,6 +6,8 @@ struct at803x_platform_data {
- int enable_rgmii_tx_delay:1;
- int enable_rgmii_rx_delay:1;
- int fixup_rgmii_tx_delay:1;
-+ int has_reset_gpio:1;
-+ int reset_gpio;
- };
-
- #endif /* _PHY_AT803X_PDATA_H */
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -261,6 +261,7 @@ static int at803x_resume(struct phy_devi
-
- static int at803x_probe(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- struct device *dev = &phydev->mdio.dev;
- struct at803x_priv *priv;
- struct gpio_desc *gpiod_reset;
-@@ -273,6 +274,12 @@ static int at803x_probe(struct phy_devic
- phydev->drv->phy_id != ATH8032_PHY_ID)
- goto does_not_require_reset_workaround;
-
-+ pdata = dev_get_platdata(dev);
-+ if (pdata && pdata->has_reset_gpio) {
-+ devm_gpio_request(dev, pdata->reset_gpio, "reset");
-+ gpio_direction_output(pdata->reset_gpio, 1);
-+ }
-+
- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpiod_reset))
- return PTR_ERR(gpiod_reset);
-@@ -404,15 +411,23 @@ static void at803x_link_change_notify(st
- * cannot recover from by software.
- */
- if (phydev->state == PHY_NOLINK) {
-- if (priv->gpiod_reset && !priv->phy_reset) {
-+ if ((priv->gpiod_reset || (pdata && pdata->has_reset_gpio)) &&
-+ !priv->phy_reset) {
- struct at803x_context context;
-
- at803x_context_save(phydev, &context);
-
-- gpiod_set_value(priv->gpiod_reset, 1);
-- msleep(1);
-- gpiod_set_value(priv->gpiod_reset, 0);
-- msleep(1);
-+ if (pdata && pdata->has_reset_gpio) {
-+ gpio_set_value_cansleep(pdata->reset_gpio, 0);
-+ msleep(1);
-+ gpio_set_value_cansleep(pdata->reset_gpio, 1);
-+ msleep(1);
-+ } else {
-+ gpiod_set_value(priv->gpiod_reset, 1);
-+ msleep(1);
-+ gpiod_set_value(priv->gpiod_reset, 0);
-+ msleep(1);
-+ }
-
- at803x_context_restore(phydev, &context);
-
+++ /dev/null
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = net_hdr_word(word++);
-+
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
-@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
- return csum_fold(csum_partial(buff, len, 0));
- }
-
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-- const struct in6_addr *daddr,
-- __u32 len, __u8 proto,
-- __wsum sum)
--{
-- __wsum tmp;
--
-- __asm__(
-- " .set push # csum_ipv6_magic\n"
-- " .set noreorder \n"
-- " .set noat \n"
-- " addu %0, %5 # proto (long in network byte order)\n"
-- " sltu $1, %0, %5 \n"
-- " addu %0, $1 \n"
--
-- " addu %0, %6 # csum\n"
-- " sltu $1, %0, %6 \n"
-- " lw %1, 0(%2) # four words source address\n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 0(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " addu %0, $1 # Add final carry\n"
-- " .set pop"
-- : "=&r" (sum), "=&r" (tmp)
-- : "r" (saddr), "r" (daddr),
-- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
-- return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
-
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -103,7 +103,7 @@ struct iphdr {
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
-
-
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -131,7 +131,7 @@ struct ipv6hdr {
-
- struct in6_addr saddr;
- struct in6_addr daddr;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-@@ -48,8 +48,8 @@ static bool ipv4_pkt_to_tuple(const stru
- if (ap == NULL)
- return false;
-
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = net_hdr_word(ap++);
-+ tuple->dst.u3.ip = net_hdr_word(ap);
-
- return true;
- }
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -82,7 +82,7 @@ struct icmphdr {
- } frag;
- __u8 reserved[4];
- } un;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16 in6_u.u6_addr16
- #define s6_addr32 in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
-
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -39,6 +39,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -819,10 +820,10 @@ static void tcp_v6_send_response(const s
- topt = (__be32 *)(t1 + 1);
-
- if (tsecr) {
-- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
-- *topt++ = htonl(tsval);
-- *topt++ = htonl(tsecr);
-+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+ put_unaligned_be32(tsval, topt++);
-+ put_unaligned_be32(tsecr, topt++);
- }
-
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -6,6 +6,7 @@
-
- #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
- * This structure contains configuration options per IPv6 link.
- */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -485,7 +485,7 @@ int ipv6_recv_error(struct sock *sk, str
- ipv6_iface_scope_id(&sin->sin6_addr,
- IP6CB(skb)->iif);
- } else {
-- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- &sin->sin6_addr);
- sin->sin6_scope_id = 0;
- }
-@@ -833,12 +833,12 @@ int ip6_datagram_send_ctl(struct net *ne
- }
-
- if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
-- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- err = -EINVAL;
- goto exit_f;
- }
- }
-- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- break;
-
- case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -397,7 +397,7 @@ static void ip6gre_err(struct sk_buff *s
- return;
- ipv6h = (const struct ipv6hdr *)skb->data;
- greh = (const struct gre_base_hdr *)(skb->data + offset);
-- key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
-+ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
-
- t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- key, greh->protocol);
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -733,7 +733,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- goto drop;
- }
-
-- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- if (pkt_len <= IPV6_MAXPLEN) {
- __IP6_INC_STATS(net, ipv6_skb_idev(skb),
- IPSTATS_MIB_INHDRERRORS);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -229,5 +229,11 @@ struct callback_head {
- typedef void (*rcu_callback_t)(struct rcu_head *head);
- typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
-
-+struct net_hdr_word {
-+ u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /* __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1351,8 +1351,8 @@ struct sk_buff **inet_gro_receive(struct
- if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- goto out_unlock;
-
-- id = ntohl(*(__be32 *)&iph->id);
-- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+ id = ntohl(net_hdr_word(&iph->id));
-+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- id >>= 16;
-
- for (p = *head; p; p = p->next) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -465,7 +465,7 @@ static struct neighbour *ipv4_neigh_look
- else if (skb)
- pkey = &ip_hdr(skb)->daddr;
-
-- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- if (n)
- return n;
- return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -449,48 +449,53 @@ static void tcp_options_write(__be32 *pt
- u16 options = opts->options; /* mungable copy */
-
- if (unlikely(OPTION_MD5 & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- /* overload cookie hash location */
- opts->hash_location = (__u8 *)ptr;
- ptr += 4;
- }
-
- if (unlikely(opts->mss)) {
-- *ptr++ = htonl((TCPOPT_MSS << 24) |
-- (TCPOLEN_MSS << 16) |
-- opts->mss);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+ opts->mss);
- }
-
- if (likely(OPTION_TS & options)) {
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
-- (TCPOLEN_SACK_PERM << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_SACK_PERM << 24) |
-+ (TCPOLEN_SACK_PERM << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- options &= ~OPTION_SACK_ADVERTISE;
- } else {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- }
-- *ptr++ = htonl(opts->tsval);
-- *ptr++ = htonl(opts->tsecr);
-+ net_hdr_word(ptr++) = htonl(opts->tsval);
-+ net_hdr_word(ptr++) = htonl(opts->tsecr);
- }
-
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK_PERM << 8) |
-- TCPOLEN_SACK_PERM);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK_PERM << 8) |
-+ TCPOLEN_SACK_PERM);
- }
-
- if (unlikely(OPTION_WSCALE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_WINDOW << 16) |
-- (TCPOLEN_WINDOW << 8) |
-- opts->ws);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_WINDOW << 16) |
-+ (TCPOLEN_WINDOW << 8) |
-+ opts->ws);
- }
-
- if (unlikely(opts->num_sack_blocks)) {
-@@ -498,16 +503,17 @@ static void tcp_options_write(__be32 *pt
- tp->duplicate_sack : tp->selective_acks;
- int this_sack;
-
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK << 8) |
-- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK << 8) |
-+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- TCPOLEN_SACK_PERBLOCK)));
-
- for (this_sack = 0; this_sack < opts->num_sack_blocks;
- ++this_sack) {
-- *ptr++ = htonl(sp[this_sack].start_seq);
-- *ptr++ = htonl(sp[this_sack].end_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- }
-
- tp->rx_opt.dsack = 0;
-@@ -520,13 +526,14 @@ static void tcp_options_write(__be32 *pt
-
- if (foc->exp) {
- len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
-- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+ net_hdr_word(ptr) =
-+ htonl((TCPOPT_EXP << 24) | (len << 16) |
- TCPOPT_FASTOPEN_MAGIC);
- p += TCPOLEN_EXP_FASTOPEN_BASE;
- } else {
- len = TCPOLEN_FASTOPEN_BASE + foc->len;
-- *p++ = TCPOPT_FASTOPEN;
-- *p++ = len;
-+ net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+ net_hdr_word(p++) = len;
- }
-
- memcpy(p, foc->val, foc->len);
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE 1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_report {
- __u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_query {
- __u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -108,7 +108,7 @@ __be32 __skb_flow_get_ports(const struct
- ports = __skb_header_pointer(skb, thoff + poff,
- sizeof(_ports), data, hlen, &_ports);
- if (ports)
-- return *ports;
-+ return (__be32)net_hdr_word(ports);
- }
-
- return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -77,7 +77,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #define ICMPV6_ROUTER_PREF_LOW 0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -89,7 +89,7 @@ struct ra_msg {
- struct icmp6hdr icmph;
- __be32 reachable_time;
- __be32 retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
-
- struct rd_msg {
- struct icmp6hdr icmph;
-@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- const u32 *p32 = pkey;
-
-- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
-- (p32[1] * hash_rnd[1]) +
-- (p32[2] * hash_rnd[2]) +
-- (p32[3] * hash_rnd[3]));
-+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+ (net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
-
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -165,7 +165,7 @@ next_knode:
- data = skb_header_pointer(skb, toff, 4, &hdata);
- if (!data)
- goto out;
-- if ((*data ^ key->val) & key->mask) {
-+ if ((net_hdr_word(data) ^ key->val) & key->mask) {
- n = rcu_dereference_bh(n->next);
- goto next_knode;
- }
-@@ -218,8 +218,8 @@ check_terminal:
- &hdata);
- if (!data)
- goto out;
-- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
-- n->fshift);
-+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+ &n->sel, n->fshift);
- }
- if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -220,7 +220,7 @@ static struct sk_buff **ipv6_gro_receive
- continue;
-
- iph2 = (struct ipv6hdr *)(p->data + off);
-- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
-
- /* All fields must match except length and Traffic Class.
- * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -47,7 +47,7 @@ struct prefix_info {
- __be32 reserved2;
-
- struct in6_addr prefix;
--};
-+} __attribute__((packed, aligned(2)));
-
- #include <linux/netdevice.h>
- #include <net/if_inet6.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct
- if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- return 0;
-
-- from = *(__be32 *)iph;
-+ from = net_hdr_word(iph);
- to = from | htonl(INET_ECN_CE << 20);
-- *(__be32 *)iph = to;
-+ net_hdr_word(iph) = to;
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- (__force __wsum)to);
-@@ -136,7 +136,7 @@ static inline int IP6_ECN_set_ce(struct
-
- static inline void IP6_ECN_clear(struct ipv6hdr *iph)
- {
-- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
-+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
- }
-
- static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -108,7 +108,7 @@ struct frag_hdr {
- __u8 reserved;
- __be16 frag_off;
- __be32 identification;
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IP6_MF 0x0001
- #define IP6_OFFSET 0xFFF8
-@@ -451,8 +451,8 @@ static inline void __ipv6_addr_set_half(
- }
- #endif
- #endif
-- addr[0] = wh;
-- addr[1] = wl;
-+ net_hdr_word(&addr[0]) = wh;
-+ net_hdr_word(&addr[1]) = wl;
- }
-
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -511,6 +511,8 @@ static inline bool ipv6_prefix_equal(con
- const __be32 *a1 = addr1->s6_addr32;
- const __be32 *a2 = addr2->s6_addr32;
- unsigned int pdw, pbi;
-+ /* Used for last <32-bit fraction of prefix */
-+ u32 pbia1, pbia2;
-
- /* check complete u32 in prefix */
- pdw = prefixlen >> 5;
-@@ -519,7 +521,9 @@ static inline bool ipv6_prefix_equal(con
-
- /* check incomplete u32 in prefix */
- pbi = prefixlen & 0x1f;
-- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+ pbia1 = net_hdr_word(&a1[pdw]);
-+ pbia2 = net_hdr_word(&a2[pdw]);
-+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- return false;
-
- return true;
-@@ -663,13 +667,13 @@ static inline void ipv6_addr_set_v4mappe
- */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
-- const __be32 *a1 = token1, *a2 = token2;
-+ const struct in6_addr *a1 = token1, *a2 = token2;
- int i;
-
- addrlen >>= 2;
-
- for (i = 0; i < addrlen; i++) {
-- __be32 xb = a1[i] ^ a2[i];
-+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- if (xb)
- return i * 32 + 31 - __fls(ntohl(xb));
- }
-@@ -838,17 +842,18 @@ static inline int ip6_default_np_autolab
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- __be32 flowlabel)
- {
-- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+ net_hdr_word((__be32 *)hdr) =
-+ htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
-
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
-
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
-
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
-
- #include <linux/types.h>
-+#include <linux/in6.h>
-
- u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -84,7 +84,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
-
- #define IP_TOS 1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -137,7 +137,7 @@ static __be32 addr_bit_set(const void *t
- * See include/asm-generic/bitops/le.h.
- */
- return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
-- addr[fn_bit >> 5];
-+ net_hdr_word(&addr[fn_bit >> 5]);
- }
-
- static struct fib6_node *node_alloc(void)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buf
-
- /* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED
-- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8)
- | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -187,8 +187,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- if (!pskb_may_pull(skb, hlen))
- return -EINVAL;
-
-- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
-- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+ *spi = net_hdr_word(skb_transport_header(skb) + offset);
-+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3842,14 +3842,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- const __be32 *ptr = (const __be32 *)(th + 1);
-
-- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
-- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+ if (net_hdr_word(ptr) ==
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
-- tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- ++ptr;
-- if (*ptr)
-- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+ if (net_hdr_word(ptr))
-+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+ tp->tsoffset;
- else
- tp->rx_opt.rcv_tsecr = 0;
- return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
- */
- struct pptp_addr {
- __u16 call_id;
-+ __u16 pad;
- struct in_addr sin_addr;
- };
-
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l
- /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
-- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- ih->hop_limit,
-- (ntohl(*(__be32 *)ih) & 0x000fffff));
-+ (ntohl(net_hdr_word(ih)) & 0x000fffff));
-
- fragment = 0;
- ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -265,8 +265,10 @@ static inline bool neigh_key_eq128(const
- const u32 *n32 = (const u32 *)n->primary_key;
- const u32 *p32 = pkey;
-
-- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
-- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+ return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+ (n32[1] ^ net_hdr_word(&p32[1])) |
-+ (n32[2] ^ net_hdr_word(&p32[2])) |
-+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
-
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- __u8 flags;
- /* Inverse flags */
- __u16 invflags;
--};
-+} __attribute__((aligned(4)));
-
- /* Values for "flag" field in struct arpt_ip (general arp structure).
- * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -424,8 +424,14 @@ void inet_proto_csum_replace16(__sum16 *
- bool pseudohdr)
- {
- __be32 diff[] = {
-- ~from[0], ~from[1], ~from[2], ~from[3],
-- to[0], to[1], to[2], to[3],
-+ ~net_hdr_word(&from[0]),
-+ ~net_hdr_word(&from[1]),
-+ ~net_hdr_word(&from[2]),
-+ ~net_hdr_word(&from[3]),
-+ net_hdr_word(&to[0]),
-+ net_hdr_word(&to[1]),
-+ net_hdr_word(&to[2]),
-+ net_hdr_word(&to[3]),
- };
- if (skb->ip_summed != CHECKSUM_PARTIAL) {
- *sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons
- * @b: Pointer to Ethernet header
- *
- * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
- * aligned OR the platform can handle unaligned access. This is the
- * case for all packets coming into netif_receive_skb or similar
- * entry points.
-@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe
- fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- return fold;
- #else
-- u32 *a32 = (u32 *)((u8 *)a + 2);
-- u32 *b32 = (u32 *)((u8 *)b + 2);
-+ const u16 *a16 = a;
-+ const u16 *b16 = b;
-
-- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
-- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+ (a16[6] ^ b16[6]);
- #endif
- }
-
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct
-
- th2 = tcp_hdr(p);
-
-- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- NAPI_GRO_CB(p)->same_flow = 0;
- continue;
- }
-@@ -244,8 +244,8 @@ found:
- ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- for (i = sizeof(*th); i < thlen; i += 4)
-- flush |= *(u32 *)((u8 *)th + i) ^
-- *(u32 *)((u8 *)th2 + i);
-+ flush |= net_hdr_word((u8 *)th + i) ^
-+ net_hdr_word((u8 *)th2 + i);
-
- /* When we receive our second frame we can made a decision on if we
- * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- hop_limit = ipv6_hdr(skb)->hop_limit;
-
- /* flowlabel and prio (includes version, which shouldn't change either */
-- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+ flowlabel = net_hdr_word(ipv6_hdr(skb));
-
- ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
-
-@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- skb->mark != mark ||
- ipv6_hdr(skb)->hop_limit != hop_limit ||
-- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- err = ip6_route_me_harder(state->net, skb);
- if (err < 0)
- ret = NF_DROP_ERR(err);
projects / openwrt / openwrt.git / commitdiff