lantiq: add Netgear DM200 support
[openwrt/openwrt.git] / target / linux / lantiq / dts /
2017-07-07 Thomas Nixonlantiq: add Netgear DM200 support
2017-06-17 Mathias Kresinlantiq: show xdsl line init status on shared dsl/intern...
2017-06-03 Tino Reichardtlantiq: add Allnet ALL0333CJ support
2017-06-03 Tino Reichardtlantiq: fix amazonse.dsti
2017-05-05 Mathias Kresinlantiq: fix avm fritz box mac addresses
2017-04-25 Kevin Darbyshire... lantiq: DGN3500: make switch LEDs blink on activity
2017-04-21 Kevin Darbyshire... lantiq: improve DGN3500 LED definitions
2017-03-26 Hauke Mehrtenslantiq: update spi driver to upstream version
2017-03-11 Mathias Kresinlantiq: xrx200: use vlan for ethernet wan port
2017-03-08 Alex Macleanlantiq: add support for the Alpha ASL56026
2017-02-11 Hauke Mehrtenslantiq: add support for kernel 4.9
2017-02-02 Mathias Kresingeneric: rtl8366rb: fix compatible string
2017-02-01 Felix Fietkaulantiq: enable SMP for XRX200
2017-01-09 Hauke Mehrtenslantiq: update USB controller initialization
2017-01-06 Hauke Mehrtenslantiq: fix console print for additional boards
2017-01-05 Hauke Mehrtenslantiq: fix console print
2016-12-24 Mathias Kresinlantiq: drop the FRITZ7360SL led-dsl alias
2016-12-24 Mathias Kresinlantiq: add FRITZ7360SL phy reset gpios
2016-12-24 Mathias Kresinlantiq: fix DGN1000B boot status leds
2016-12-12 Martin Blumenstingllantiq: remove "init" kernel command line parameter...
2016-12-12 Martin Blumenstingllantiq: specify console using stdout-path instead of...
2016-12-10 Hauke Mehrtenslantiq: falcon: remove bootargs-append
2016-12-04 Mathias Kresinlantiq: fix image validation errors
2016-11-29 Mathias Kresinlantiq: use BT HomeHub 5 Type A OEM partition layout
2016-11-29 Mathias Kresinlantiq: backport kernel patch to pass of node to nand_d...
2016-11-29 Martin Blumenstingllantiq: use ath9k device tree bindings binding/owl...
2016-11-27 Hauke Mehrtenslantiq: add Falcon support
2016-11-27 Mathias Kresintreewide: fix button keys codes used in dts
2016-11-26 Martin Blumenstingllantiq: specify the PCIe controller's interrupt, size...
2016-11-23 Eddi De Pierilantiq: write protect vgv7519 u-boot and u-boot-env...
2016-11-21 Ben Mulvihilllantiq: device tree bindings for dwc2 on danube
2016-11-16 dpeddilantiq: enable VMMC for VGV7519
2016-11-16 Eddi De Pierilantiq: enable VMMC for VGV7510KW22
2016-11-13 Mathias Kresintreewide: dts: use keycode defines from input dt-binding
2016-11-09 Mathias Kresinlantiq: use the device tree bindings from rt2x00 driver
2016-11-09 Mathias Kresinlantiq: fix VGV7519 and VGV7510KW22 mac addresses
2016-11-03 Mathias Kresinlantiq: use external pci clock on ARV7506PW11
2016-11-03 Mathias Kresinlantiq: cleanup dts files
2016-10-31 Stefan Kochlantiq: modify vr9.dts to support vmmc
2016-10-26 Stefan Kochlantiq: danube fxs bugfix: changed compatible attribute...
2016-10-19 Mathias Kresinlantiq: enable cpu temp driver for all vr9 boards
2016-10-19 Andreas Eberleinlantiq: Sanitize device tree files
2016-10-19 Andreas Eberleinlantiq: Fix buttons for ARV752DPW
2016-10-19 Mathias Kresinlantiq: rework VG3503J image
2016-10-15 Mathias Kresinlantiq: fix ARV452CQW keys
2016-10-05 Mathias Kresinlantiq: fixup last commits
2016-10-05 Mathias Kresinlantiq: fix usb leds/trigger
2016-10-05 Mathias Kresinlantiq: use aliases device tree node for leds
2016-09-10 Mathias Kresinlantiq: enable cpu temp driver for more tested boards
2016-08-15 Martin Schillerlantiq/xrx200-net: add interrupt for second DMA TX...
2016-08-10 Mathias Kresinlantiq: enable cpu temp driver for selected boards
2016-08-10 Mathias Kresinlantiq: use the etop driver DT bindings only
2016-08-10 Mathias Kresinlantiq: fix mac address increments
2016-08-10 Mathias Kresinlantiq: use ath, eep-flash/mac-offset for ath eep nodes
2016-07-28 Hauke Mehrtenslantiq: fix switch configuration for EASY80920
2016-07-05 Ben Mulvihilllantiq: mac address setting on BTHOMEHUBV3A
2016-06-22 Oswald Buddenhagenlantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)
2016-06-22 Daniel Gimpelevichlantiq: Slow down SPI flash on the DGN3500
2016-06-22 John Crispinlantiq: remove gr7000 support
2016-06-21 Hauke Mehrtenslantiq: make EASY80920 work with both chip versions
2016-06-21 Hauke Mehrtenslantiq: use new partition layout for EASY80920NAND
2016-06-20 Mathias Kresinlantiq: BTHOMEHUBV5A - use the power event code for...
2016-06-14 John Crispinlantiq: fix fritz7320 wifi support
2016-06-13 John Crispinlantiq: fix ARV452CQW button gpio setup
2016-06-13 John Crispinlantiq: Add Support for Fritz!Box 7360 SL
2016-06-13 John Crispinlantiq: use new property name for eiu irqs
2016-06-11 Felix Fietkaulantiq: add Buffalo WBMR-300HPD support
2016-05-27 Daniel Gimpelevichkernel: remove a hack that was obsoleted upstream
2016-05-27 Daniel Gimpelevichlantiq: Use the correct SPI flash speed for the Netgear...
2016-05-27 Mathias Kresinlantiq: VGV7510KW22 - enable the IP101A phy
2016-05-27 Mathias Kresinlantiq: VGV7510KW22 - fix pinmux configuration
2016-05-27 Mathias Kresinlantiq: VGV7519 - fix brn partition layout
2016-05-27 Mathias Kresinlantiq: VGV7519 - get mac address from board_config...
2016-05-27 Mathias Kresinlantiq: VGV7519 - add vlan support
2016-05-27 Mathias Kresinlantiq: VGV7519 - add second usb port
2016-05-27 Mathias Kresinlantiq: VGV7519 - cleanup pinmux configuration
2016-05-27 Mathias Kresinlantiq: VGV7519 - remove/merge redundant parts in dts
2016-05-24 John Crispinlantiq: fix regression in VG3503J.dts
2016-05-23 Mathias Kresinlantiq: VG3503J - use the 11G firmware
2016-05-23 Mathias Kresinlantiq: VG3503J - merge profiles
2016-05-10 blogiclantiq: VGV7510KW22BRN - set the phy clock source
2016-05-10 blogiclantiq: VGV7510KW22BRN - support dual-image
2016-05-10 blogiclantiq: move partitions into partion table node
2016-05-10 blogiclantiq: VG3503J - use the same PHY led functionality...
2016-05-10 blogiclantiq: use the same functionality for all ethernet...
2016-04-26 John Crispinlantiq: remove read-only flag on two partitions on...
2016-02-08 John Crispinlantiq: VGV7510KW22/VGV7519 update spi pinmux group
2016-02-08 John Crispinlantiq: BTHOMEHUBV5A - explicit select the flash device
2016-01-29 Felix Fietkaulantiq: Make the ar9.dtsi sram node match "simple-bus"
2016-01-29 Felix Fietkaulantiq: Move the definition of the xrx200-net node...
2016-01-18 Hauke Mehrtenslantiq: add support for TP-Link VR200v
2016-01-17 Felix Fietkaulantiq: Remove incorrect PCIe compatible strings
2016-01-17 Felix Fietkaulantiq: Switch to the new SPI driver
2016-01-17 Felix Fietkaulantiq: Enable the hardware SPI driver on the DGN3500...
2016-01-17 Felix Fietkaulantiq: Enable SPI for the EASY80920 board again
2016-01-17 Felix Fietkaulantiq: Switch FRITZ3370 from spi-gpio to the hardware...
2016-01-17 Felix Fietkaulantiq: Re-use the SPI node from vr9.dtsi in TDW89X0...
2016-01-17 Felix Fietkaulantiq: Add the SPI node to ar9.dtsi and vr9.dtsi
2016-01-17 Felix Fietkaulantiq: Configure the PCIe reset GPIO using OF
2016-01-17 Felix Fietkaulantiq: Use the new pinctrl compatible strings
next