openwrt/openwrt.git
3 years agobuild: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel modules
Felix Fietkau [Thu, 18 Mar 2021 06:22:11 +0000 (07:22 +0100)]
build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel modules

This resolves issues uncovered by musl updates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomt76: update to the latest version
Felix Fietkau [Thu, 18 Mar 2021 09:51:05 +0000 (10:51 +0100)]
mt76: update to the latest version

0b6c9a043f78 mt76: move de-amsdu buffer per-phy
48a905e23791 mt76: mt7615: fix CSA event format
fbef8bba038f mt76: mt7921: remove duplicated macros in mcu.h

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agouboot-mediatek: don't rely in 'lzma' cmdline
Daniel Golle [Thu, 18 Mar 2021 04:18:05 +0000 (04:18 +0000)]
uboot-mediatek: don't rely in 'lzma' cmdline

Use 'xz --format=lzma' instead.
Fixes build for mt7629.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomediatek: fix broken UniFi 6 LR image
David Bauer [Wed, 17 Mar 2021 23:56:02 +0000 (00:56 +0100)]
mediatek: fix broken UniFi 6 LR image

Ubiquiti's own bootloader expects the configuration mode to be present
with a "@" instead of a "-" for the sperator character. Otherwise
booting of the image fails.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agoramips: fix broken UniFi 6 Lite image
David Bauer [Wed, 17 Mar 2021 23:54:25 +0000 (00:54 +0100)]
ramips: fix broken UniFi 6 Lite image

Ubiquiti's own bootloader expects the configuration mode to be present
with a "@" instead of a "-" for the sperator character. Otherwise
booting of the image fails.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agomediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2
Hauke Mehrtens [Mon, 15 Mar 2021 17:40:14 +0000 (18:40 +0100)]
mediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2

This fixes writing to the U-Boot environment by making the partition
writable and setting the correct flash sector size of 128K.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agouboot-mediatek: fix default environment of bpi-r64 emmc
Daniel Golle [Wed, 17 Mar 2021 22:36:58 +0000 (22:36 +0000)]
uboot-mediatek: fix default environment of bpi-r64 emmc

The emmc variant used the default environment of the sdmmc variant.
Fix that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agouboot-mediatek: bpi-r64: make use of FIT configuration selection
Daniel Golle [Wed, 17 Mar 2021 17:39:46 +0000 (17:39 +0000)]
uboot-mediatek: bpi-r64: make use of FIT configuration selection

Allow selecting either SATA or PCIE functionality using uImage.FIT
configurations and device-tree overlays.
By default, PCIE1 is selected (as it has been before this change).
To select SATA instead, you can do this now:

fw_setenv bootconf config-mt7622-bananapi-bpi-r64-sata

and reboot.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomediatek: bpi-r64: use dt-overlay to select SATA or PCIE1
Daniel Golle [Wed, 17 Mar 2021 17:36:54 +0000 (17:36 +0000)]
mediatek: bpi-r64: use dt-overlay to select SATA or PCIE1

The Bananapi BPi-R64 got a SATA interface which cannot be used at the
same time as the second mPCIe slot. The decission is made by hogging
GPIO 90.
Embed two addtional DT overlay blobs into the image to allow bootloader
selection of either SATA or PCIE1 feature.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoinclude/image*: add support for device-tree overlays
Daniel Golle [Wed, 17 Mar 2021 17:30:48 +0000 (17:30 +0000)]
include/image*: add support for device-tree overlays

Add new target feature 'dt-overlay' which makes DTC keep the symbol
names in the generated dtb.
Make sure additional DT overlay sources specified by the new device
variable DEVICE_DTS_OVERLAY get compiled together with the main DTS
(currently overlays got to be in the same folder). Let Build/fit pass
the generated DT overlay blobs to mkits.sh.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoscripts/mkits.sh: add support for adding DT overlay blobs to image
Daniel Golle [Wed, 17 Mar 2021 17:27:55 +0000 (17:27 +0000)]
scripts/mkits.sh: add support for adding DT overlay blobs to image

Allow adding multiple device tree overlay blobs to an image and
generate configurations for each of them.
This is useful on boards with modern U-Boot which allow e.g. user-
configurable peripherals ("shields") in that way.
Note that currently, each generated configuration adds exactly one
overlay on top of the base image, ie. adding multiple overlays at the
same time is not yet supported.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoath79: fix RS-485 on Teltonika RUT-955
Daniel Golle [Wed, 17 Mar 2021 03:39:51 +0000 (03:39 +0000)]
ath79: fix RS-485 on Teltonika RUT-955

DTR GPIO isn't actually needed and triggers boot warning.
TX pin was off by one (GPIO 19 instead of GPIO 18).

Reported-by: @tophirsch
Fixes: d1130ad265 ("ath79: add support for Teltonika RUT955")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomalta: prune subtarget configs
Tony Ambardar [Fri, 19 Feb 2021 06:52:20 +0000 (22:52 -0800)]
malta: prune subtarget configs

Drop autogenerated kernel config options. These aren't needed to build and
can obscure options relevant to the subtarget.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agomalta: update kernel 5.10 configs
Tony Ambardar [Wed, 17 Feb 2021 08:12:44 +0000 (00:12 -0800)]
malta: update kernel 5.10 configs

Update generic config to add missing options that prompt during builds. Run
"make kernel_oldconfig" to refresh malta target config.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agomalta: support kernel 5.10
Tony Ambardar [Wed, 17 Feb 2021 06:08:02 +0000 (22:08 -0800)]
malta: support kernel 5.10

Add linux 5.10 as testing kernel and copy generic config from 5.4.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agorealtek: enable SerDes NWAY and SGMII negotiation
Bjørn Mork [Sat, 13 Mar 2021 16:45:54 +0000 (17:45 +0100)]
realtek: enable SerDes NWAY and SGMII negotiation

This allows copper SFPs to negotiate speeds lower than 1gig.

Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
3 years agorealtek: enabled Marvell and Realtek PHYs
Bjørn Mork [Sat, 13 Mar 2021 16:45:53 +0000 (17:45 +0100)]
realtek: enabled Marvell and Realtek PHYs

The rtl83xx-phy driver is necessary for proper configuration of the
PHYs if U-Boot hasn't done that.

1000Base-T SFPs often contains a Marvell 88E1111 and will not work
without this driver. Include it by default to support copper SFPs.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
3 years agorealtek: enable HWMON for SFP sensors
Bjørn Mork [Sat, 13 Mar 2021 16:45:52 +0000 (17:45 +0100)]
realtek: enable HWMON for SFP sensors

This adds SFP sensors as a hwmon device, allowing readout of
temperatures, DOM and other sensor readings available from the
SFP.  Example from a ZyXEL GS1900-10HP with a DOM capable
1000Base-SX SFP:

root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/*
/sys/class/hwmon/hwmon0/curr1_crit:90
/sys/class/hwmon/hwmon0/curr1_crit_alarm:0
/sys/class/hwmon/hwmon0/curr1_input:4
/sys/class/hwmon/hwmon0/curr1_label:bias
/sys/class/hwmon/hwmon0/curr1_lcrit:0
/sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/curr1_max:85
/sys/class/hwmon/hwmon0/curr1_max_alarm:0
/sys/class/hwmon/hwmon0/curr1_min:0
/sys/class/hwmon/hwmon0/curr1_min_alarm:0
/sys/class/hwmon/hwmon0/in0_crit:3795
/sys/class/hwmon/hwmon0/in0_crit_alarm:0
/sys/class/hwmon/hwmon0/in0_input:3317
/sys/class/hwmon/hwmon0/in0_label:VCC
/sys/class/hwmon/hwmon0/in0_lcrit:2805
/sys/class/hwmon/hwmon0/in0_lcrit_alarm:0
/sys/class/hwmon/hwmon0/in0_max:3465
/sys/class/hwmon/hwmon0/in0_max_alarm:0
/sys/class/hwmon/hwmon0/in0_min:3135
/sys/class/hwmon/hwmon0/in0_min_alarm:0
/sys/class/hwmon/hwmon0/name:sfp_p10
/sys/class/hwmon/hwmon0/power1_crit:708
/sys/class/hwmon/hwmon0/power1_crit_alarm:0
/sys/class/hwmon/hwmon0/power1_input:259
/sys/class/hwmon/hwmon0/power1_label:TX_power
/sys/class/hwmon/hwmon0/power1_lcrit:89
/sys/class/hwmon/hwmon0/power1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/power1_max:501
/sys/class/hwmon/hwmon0/power1_max_alarm:0
/sys/class/hwmon/hwmon0/power1_min:126
/sys/class/hwmon/hwmon0/power1_min_alarm:0
/sys/class/hwmon/hwmon0/power2_crit:1259
/sys/class/hwmon/hwmon0/power2_crit_alarm:0
/sys/class/hwmon/hwmon0/power2_input:404
/sys/class/hwmon/hwmon0/power2_label:RX_power
/sys/class/hwmon/hwmon0/power2_lcrit:6
/sys/class/hwmon/hwmon0/power2_lcrit_alarm:0
/sys/class/hwmon/hwmon0/power2_max:794
/sys/class/hwmon/hwmon0/power2_max_alarm:0
/sys/class/hwmon/hwmon0/power2_min:10
/sys/class/hwmon/hwmon0/power2_min_alarm:0
/sys/class/hwmon/hwmon0/temp1_crit:100000
/sys/class/hwmon/hwmon0/temp1_crit_alarm:0
/sys/class/hwmon/hwmon0/temp1_input:22547
/sys/class/hwmon/hwmon0/temp1_label:temperature
/sys/class/hwmon/hwmon0/temp1_lcrit:-50000
/sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0
/sys/class/hwmon/hwmon0/temp1_max:85000
/sys/class/hwmon/hwmon0/temp1_max_alarm:0
/sys/class/hwmon/hwmon0/temp1_min:-40000
/sys/class/hwmon/hwmon0/temp1_min_alarm:0
/sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10
/sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10
/sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp
/sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1

Tested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
3 years agorealtek: re-enable sfp driver for ZyXEL GS1900-10HP
Bjørn Mork [Sat, 13 Mar 2021 16:45:51 +0000 (17:45 +0100)]
realtek: re-enable sfp driver for ZyXEL GS1900-10HP

There is no need to define a static link or a phy for the sfp
ports.  Using phy-mode and managed properties to  describe the
link to the sfp phy.

We have to keep the now unconnected virtual "phys" because the
switch  driver uses their "phy-is-integrated" property to figure
out which ports to enable as fibre ports.

Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
3 years agorealtek: need to handle PHY_INTERFACE_MODE_NA for sfps
Bjørn Mork [Sat, 13 Mar 2021 16:45:50 +0000 (17:45 +0100)]
realtek: need to handle PHY_INTERFACE_MODE_NA for sfps

From the validate docs in include/linux/phylink.h:

 When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the
 MAC driver to return all supported link modes.

Tested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
3 years agorealtek: fix link-state interrupt
Bjørn Mork [Sat, 13 Mar 2021 16:45:49 +0000 (17:45 +0100)]
realtek: fix link-state interrupt

This bug was the root cause for the failing sfp driver.

Acked-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
3 years agomtd: fix imagetag compilation
Álvaro Fernández Rojas [Wed, 17 Mar 2021 07:41:44 +0000 (08:41 +0100)]
mtd: fix imagetag compilation

Commit b5b0796a1322 added an uint32_t to mtd.h without including stdint, which
results in a compilation error for those files not including stdint.h.

In file included from imagetag.c:36:
mtd.h:15:8: error: unknown type name 'uint32_t'
 extern uint32_t opt_trxmagic;
        ^~~~~~~~
imagetag.c: In function 'trx_fixup':
imagetag.c:180:10: warning: unused variable 'res' [-Wunused-variable]
  ssize_t res;
          ^~~
imagetag.c:177:14: warning: unused variable 'scan' [-Wunused-variable]
  void *ptr, *scan;
              ^~~~
imagetag.c: In function 'trx_check':
imagetag.c:246:27: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
     struct bcm_tag *tag = (const struct bcm_tag *) buf;
                           ^
make[3]: *** [<builtin>: imagetag.o] Error 1

Fixes: b5b0796a1322 ("mtd: add option for TRX magic to fixtrx")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobcm4908: backport recent bcm_sf2 changes
Rafał Miłecki [Wed, 17 Mar 2021 06:40:49 +0000 (07:40 +0100)]
bcm4908: backport recent bcm_sf2 changes

One 5.12 link fix and 5.13 crossbar support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm4908: backport recent bcm4908_enet changes
Rafał Miłecki [Tue, 16 Mar 2021 22:35:45 +0000 (23:35 +0100)]
bcm4908: backport recent bcm4908_enet changes

This includes 5.12 fix and 5.13 improvements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobuild,ib: add STRIP_ABI option for manifest
Paul Spooren [Tue, 16 Mar 2021 01:59:26 +0000 (15:59 -1000)]
build,ib: add STRIP_ABI option for manifest

The ImageBuilder `make manifest` prints all installed packages. This
function can be used to create a list of package and corresponding
package versions before attempting image creation.

When called with `--strip-abi` OPKG can automatically strip attached
ABIVersions from package names. Make this function accessible for the
ImageBuilder by adding a `STRIP_ABI` variable.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agombedtls: update to 2.16.10
Magnus Kroken [Sun, 14 Mar 2021 18:42:33 +0000 (19:42 +0100)]
mbedtls: update to 2.16.10

This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for security issues.

Security fixes:
* Fix a buffer overflow in mbedtls_mpi_sub_abs()
* Fix an errorneous estimation for an internal buffer in
mbedtls_pk_write_key_pem()
* Fix a stack buffer overflow with mbedtls_net_poll() and
mbedtls_net_recv_timeout()
* Guard against strong local side channel attack against base64 tables
by making access aceess to them use constant flow code

Full release announcement:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.10

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
3 years agobmips: backport bcm6368-mdio-mux support
Álvaro Fernández Rojas [Tue, 16 Mar 2021 19:06:00 +0000 (20:06 +0100)]
bmips: backport bcm6368-mdio-mux support

This patch has been accepted for linux v5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobmips: enable CONFIG_B53_MDIO_DRIVER
Álvaro Fernández Rojas [Tue, 16 Mar 2021 19:00:00 +0000 (20:00 +0100)]
bmips: enable CONFIG_B53_MDIO_DRIVER

Some devices have external switches connected by MDIO.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobmips: backport b53 spi device tree patch
Álvaro Fernández Rojas [Tue, 16 Mar 2021 18:57:37 +0000 (19:57 +0100)]
bmips: backport b53 spi device tree patch

This patch has been accepted for linux v5.13.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobmips: dgnd3700-v2: fix ethernet
Álvaro Fernández Rojas [Sun, 14 Mar 2021 19:05:29 +0000 (20:05 +0100)]
bmips: dgnd3700-v2: fix ethernet

This is a temporary workaround to get the ethernet working, since external
switch is connected by MDIO and it needs additional work.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agokernel: backports: mt7530: fix TRGMII mode after reset
Ilya Lipnitskiy [Tue, 16 Mar 2021 05:29:55 +0000 (22:29 -0700)]
kernel: backports: mt7530: fix TRGMII mode after reset

Backport upstream patch that fixes TRGMII mode now that mt7530 is
actually resetting the switch on ramips devices.

Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both.

Fixes: 69551a244292 ("ramips: manage low reset lines")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
3 years agox86/legacy: fix subtarget CPU for kernel 5.10
Tony Ambardar [Mon, 15 Mar 2021 09:48:46 +0000 (02:48 -0700)]
x86/legacy: fix subtarget CPU for kernel 5.10

The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit
generic subtarget. However, the legacy subtarget arch wasn't set to the
older 586MMX, defaulting instead to the i686.

Explicitly set the subtarget arch and refresh the subtarget config, as done
already with the old geode subtarget.

Fixes: 8391781389 ("x86: support kernel 5.10")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agobcm4908: backport first PHY 5.13 patches
Rafał Miłecki [Mon, 15 Mar 2021 19:30:21 +0000 (20:30 +0100)]
bcm4908: backport first PHY 5.13 patches

1. Upstream accepted version of Kconfig change
2. Documentation binding fix

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agomediatek: mt7622: drop duplicate DEVICE_PACKAGES
Daniel Golle [Mon, 15 Mar 2021 16:39:20 +0000 (16:39 +0000)]
mediatek: mt7622: drop duplicate DEVICE_PACKAGES

kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part
of the target's default package set. No need to add them again for
buffalo_wsr-2533dhp2.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomediatek: add support for Buffalo WSR-2533DHP2
INAGAKI Hiroshi [Sun, 7 Mar 2021 17:36:16 +0000 (18:36 +0100)]
mediatek: add support for Buffalo WSR-2533DHP2

This adds support for the Buffalo WSR-2533DHP2.

The device uses the Broadcom TRX image format with a special magic. To
be able to boot the images or load them they have to be wrapped with
different headers depending how it is loaded.

There are multiple ways to install OpenWrt on this device.
Boot ramdisk from U-Boot
----------------------------
This will load the image and not write it into the flash.

1. Stop boot menu with "space" key
2. Select "System Load Linux to SDRAM via TFTP."
3. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin
4. The system boots the image

Write to flash from U-Boot
-----------------------------
This will load the image over tftp and directly write it into the flash.

1. Stop boot menu with "space" key
2. Select "System Load Linux Kernel then write to Flash via TFTP."
3. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin
4. The system writes this image into the flash and boots into it.

Write to flash from Web UI
-----------------------------
This will load the image over over the Web UI and write it into the flash

1. Open the Web UI
2. Go to "管理" -> "ファームウェア更新"
3. Select "ローカルファイル指定" and click "更新実行"
4. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin
5. The system writes this image into the flash and boots into it.

Specifications
-------------------
* SoC:       MT7622 (4x4 2.4 GHz Wifi)
* Wifi:      MT7615 (4x4 5 GHz Wifi)
* Flash:     Winbond W29N01HZ 128MB SLC NAND
* RAM        256MB
* Ethernet:  Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s)

Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agomediatek: support non standard trx magic values
Hauke Mehrtens [Sun, 7 Mar 2021 17:28:15 +0000 (18:28 +0100)]
mediatek: support non standard trx magic values

Buffalo uses the TRX format with a different magic, add support for
this.

It is planned to send these patches upstream.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agomtd: add option for TRX magic to fixtrx
INAGAKI Hiroshi [Sun, 7 Mar 2021 15:47:17 +0000 (16:47 +0100)]
mtd: add option for TRX magic to fixtrx

Buffalo uses the TRX header with a different magic and even changes this
magic with different devices. This change allows to specify the header
to use as a command line argument.

This is needed for the Buffalo WSR-2533DHP2 based on mt7622.

Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agotools: otrx: allow own magic
Hauke Mehrtens [Wed, 30 Dec 2020 17:24:51 +0000 (18:24 +0100)]
tools: otrx: allow own magic

This allows to specify an own magic instead of using the default magic
value TRX_MAGIC. If no own magic is specified the default one will be
used.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agomediatek: fix mtk parallel nand driver
Hauke Mehrtens [Mon, 8 Mar 2021 23:55:19 +0000 (00:55 +0100)]
mediatek: fix mtk parallel nand driver

This fixes some bugs in the mtk parallel nand driver introduced in 5.10.

This patch was send upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agokernel: replace threaded NAPI implementation in 5.10 with upstream backport
Felix Fietkau [Sun, 14 Mar 2021 22:53:35 +0000 (23:53 +0100)]
kernel: replace threaded NAPI implementation in 5.10 with upstream backport

This uses a kthread per NAPI instance instead of the workqueue approach

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomt76: update to the latest version
Felix Fietkau [Sun, 14 Mar 2021 23:10:03 +0000 (00:10 +0100)]
mt76: update to the latest version

6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id
7e1eff676257 mt76: mt7915: fix unused 'mode' variable
8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence
27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work
c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update]
fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update]
bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI
1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting
c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation
9002b0b30aed mt76: mt7615: add rx checksum offload support
8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload
8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work
760adce29100 mt76: mt7921: fix aggr length histogram
84229a51845a mt76: mt7915: fix aggr len debugfs node
10a95da23cb7 mt76: mt7921: remove unneeded semicolon
2856dc8fb57e mt76: mt7921: fix stats register definitions
1b245e57549d mt76: mt7615: fix TSF configuration
1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check
f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211
8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211
ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface
e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list
ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine
fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt
28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap
8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start
5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC
58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC
76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens
7de0a0654054 mt76: mt7915: fix CSA notification for DBDC
e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens
477b78301879 mt76: mt7915: fix PHY mode for DBDC
37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1
29a04583aecb mt76: mt7915: fix rxrate reporting
a4307e6ba054 mt76: mt7915: fix txrate reporting
256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops
638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops
975cccfa96da mt76: mt7663: fix when beacon filter is being applied
aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic
00628061b546 mt76: mt7615: add missing capabilities for DBDC
2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy()
6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg
3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure
9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine.
e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine
7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine
a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine
e0708e296e27 mt76: mt7921: add wifi reset support
87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration
cc933b3669f7 mt76: mt7921: remove redundant check on type
ca22cc221ae7 linux-firmware: add firmware for MT7921

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomac80211: backport upstream patches for driver disconnect
Felix Fietkau [Sun, 14 Mar 2021 23:05:42 +0000 (00:05 +0100)]
mac80211: backport upstream patches for driver disconnect

Needed for an mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: prereq: drop support for Python 3.5
Andre Heider [Tue, 16 Feb 2021 07:21:08 +0000 (08:21 +0100)]
build: prereq: drop support for Python 3.5

The final Python 3.5 release was 3.5.10 in September 2020 [0].
This release series is now End-of-Life (EOL).

The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04,
which will be EOL in April 2021 [1].

The meson build system bumped their python requirement to 3.6 for the 0.57.0
release. This patch ensures that OpenWrt can update meson while still
relying on the host python.

[0] https://www.python.org/dev/peps/pep-0478/#id4
[1] https://ubuntu.com/about/release-cycle
[2] https://mesonbuild.com/Release-notes-for-0-57-0.html#minimum-required-python-version-updated-to-36

Signed-off-by: Andre Heider <a.heider@gmail.com>
[python3.6+ in README.md]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
3 years agoscripts,ipkg-build: use realpath for pkg_dir
Paul Spooren [Thu, 4 Feb 2021 23:49:02 +0000 (13:49 -1000)]
scripts,ipkg-build: use realpath for pkg_dir

This allows manual execution of the ipkg-build script even with
releative path.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agoscripts,ipkg-build: apply shellcheck
Paul Spooren [Thu, 4 Feb 2021 23:34:30 +0000 (13:34 -1000)]
scripts,ipkg-build: apply shellcheck

This commit cleans the `ipkg-build` script via changes suggested by
shellcheck. These are mostly word splitting issues.

Remove the definition of GZIP, this adds three "lookups" of the `gzip`
binary but the rest of the build system doesn't seem to use such
improvements neither.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agogettext-full: disable nameless locale define
Rosen Penev [Sat, 6 Mar 2021 22:16:55 +0000 (14:16 -0800)]
gettext-full: disable nameless locale define

It seems some packages like transmission and json-glib fail with it
enabled.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
3 years agoopkg: update to git HEAD
Daniel Golle [Mon, 15 Mar 2021 00:48:02 +0000 (00:48 +0000)]
opkg: update to git HEAD

 5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoopkg: update to git HEAD
Daniel Golle [Sun, 14 Mar 2021 22:55:17 +0000 (22:55 +0000)]
opkg: update to git HEAD

 d3a63b3 libopkg: add option to strip ABI versions from listed names

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agouboot-mediatek: also install production image to eMMC
Daniel Golle [Sun, 14 Mar 2021 22:08:16 +0000 (22:08 +0000)]
uboot-mediatek: also install production image to eMMC

Make installation to eMMC more convenient on the BPi-R64 by also
copying the production image (if valid) from SD Card to eMMC.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomediatek: mt7622: clean up image build
Daniel Golle [Sun, 14 Mar 2021 19:11:14 +0000 (19:11 +0000)]
mediatek: mt7622: clean up image build

 * clean up whitespace to make GPT partitioning more readable
 * don't select packages already part of the target default selection
 * don't select U-Boot variants (breaks ImageBuilder)
 * don't select AHCI on boards without SATA
 * don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices
   work fine with the in-SoC XHCI host having just kmod-usb3 installed.
 * select kmod-btmtkuart for devices with Bluetooth support
 * sort DEVICE_PACKAGES

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agouboot-mediatek: select matching U-Boot for board
Daniel Golle [Sun, 14 Mar 2021 19:07:00 +0000 (19:07 +0000)]
uboot-mediatek: select matching U-Boot for board

Instead of building all U-Boot variants by default, build only those
needed by the selected board(s).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agofirmware-utils/ptgen: remove unused variable assignment
Daniel Golle [Sun, 14 Mar 2021 19:04:20 +0000 (19:04 +0000)]
firmware-utils/ptgen: remove unused variable assignment

Discovered by coverty:

 CID 1473630:  Code maintainability issues  (UNUSED_VALUE)

 Assigning value from "type_to_guid_and_name(type, &name)" to
 "part_guid" here, but that stored value is overwritten before it can
 be used.

Remove the now redundant assignment of part_guid which is also set
conditionally later on.

Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobcm4908: use accepted 5.13 DTS patches
Rafał Miłecki [Sun, 14 Mar 2021 18:22:18 +0000 (19:22 +0100)]
bcm4908: use accepted 5.13 DTS patches

Some patches were slightly cleaned up. One things worth mentioning is
that adding:
phy-mode = "rgmii"
broke SF2 driver. It made it access random register breaking switch
setup.

That's why this commit also adds a quick sf2 fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm53xx: backport first 5.13 DTS changes
Rafał Miłecki [Sun, 14 Mar 2021 18:10:18 +0000 (19:10 +0100)]
bcm53xx: backport first 5.13 DTS changes

This adds NVMEM bindings that are needed for proper booting on Linksys
devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agox86: support kernel 5.10
Tony Ambardar [Tue, 9 Mar 2021 03:16:11 +0000 (19:16 -0800)]
x86: support kernel 5.10

Add linux 5.10 as testing kernel, copy generic/subtarget configs and target
patches from 5.4.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: update target patches for kernel 5.10

Refresh all patches while also dropping:
    800-hwmon-w83627ehf-dont-claim-nct677x.patch

which is now upstreamed as:
    3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support")

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: refresh 5.10 target config

Refresh config using "make kernel_oldconfig".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: refresh and test all subtarget configs

Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget".

Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic.
Build-tested only: x86/geode.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
[squashed commits]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
3 years agokernel: support new mdio_devres.ko module in 5.10
Tony Ambardar [Mon, 8 Mar 2021 04:22:03 +0000 (20:22 -0800)]
kernel: support new mdio_devres.ko module in 5.10

Add kmod-mdio-devres package and kernel config symbol, and update related
kmod-r8169 and kmod-ixgbe package dependencies.

Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agokernel: add missing config symbols for 5.10
Tony Ambardar [Wed, 17 Feb 2021 08:12:44 +0000 (00:12 -0800)]
kernel: add missing config symbols for 5.10

Update generic config to add missing options that prompt during builds.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agobmips: minor ethernet driver cleanups and fixes
Álvaro Fernández Rojas [Sun, 14 Mar 2021 13:22:53 +0000 (14:22 +0100)]
bmips: minor ethernet driver cleanups and fixes

Add some minor ethernet driver cleanups and fixes to improve code quality.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobmips: reorganize patches
Álvaro Fernández Rojas [Sun, 14 Mar 2021 13:21:48 +0000 (14:21 +0100)]
bmips: reorganize patches

Rename and reorganize backported patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agorealtek: Add ZyXEL GS1900-8
Hauke Mehrtens [Wed, 27 Jan 2021 21:16:11 +0000 (22:16 +0100)]
realtek: Add ZyXEL GS1900-8

The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.

Specifications
--------------
* Device:    ZyXEL GS1900-8 v1.2
* SoC:       Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash:     Macronix MX25L12835F 16 MiB
* RAM:       Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet:  8x 10/100/1000 Mbit
* LEDs:      1 PWR LED (green, not configurable)
             1 SYS LED (green, configurable)
             8 ethernet port status LEDs (green, SoC controlled)
* Buttons:   1 on-off glide switch at the back (not configurable)
             1 reset button at the right side, behind the air-vent
               (not configurable)
             1 reset button on front panel (configurable)
* Power      12V 1A barrel connector
* UART:      1 serial header (JP2) with populated standard pin connector on
             the left side of the PCB, towards the back. Pins are labelled:
             + VCC (3.3V)
             + TX (really RX)
             + RX (really TX)
             + GND
             the labelling is done from the usb2serial connector's point of
             view, so RX/ TX are mixed up.

Serial connection parameters for both devices: 115200 8N1.

Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.

* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
  image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
  space bar, and enable the network:
  > rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
  OEM firmware on the backup partition for the time being. OpenWrt can
  only boot off the first partition anyway (hardcoded in the DTS). To
  make sure we are manipulating the first partition, issue the following
  commands:
  > setsys bootpartition 0
  > savesys
* Download the image onto the device and boot from it:
  > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
  > bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
  > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agorealtek: Add generic zyxel_gs1900 image definition
Hauke Mehrtens [Wed, 24 Feb 2021 21:03:39 +0000 (22:03 +0100)]
realtek: Add generic zyxel_gs1900 image definition

Add a new common device definition for the Zyxel GS1900 line of
switches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agoselinux-policy: update to version v0.8
Dominick Grift [Sun, 14 Mar 2021 11:42:29 +0000 (12:42 +0100)]
selinux-policy: update to version v0.8

3d7da7a igmpproxy tidy some loose ends
c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf
5a18967 adds igmpproxy skeleton
7e6a218 logread: support resolving dns names
e39ca8b netifd: add support for /etc/udhcpc.user
7952bd0 odhcp6c: support /etc/odhcp6c.user
ba0eb4e swconfig, fwenv, agent
4556b8a pppd cosmetic
9324d9d pppd: sends AT commands to model using /dev/ttyUSBN
417b14a ttydev: add some more ttyUSB
ed739dc example: dont depend on policycoreutils
97613f9 dropbear: using dropbear as scp: dns name resolving
12c193b dropbear tcp connect ssh ports for scp
c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional
8c5de35 this is a bug
8d5c463 uhttpd rcboot rcdnsmasq
094266e hostapd and wpa_supplicant
aef0bd7 mountroot: maintains /tmp/sysupgrade.tar
24f0406 dropbear: allow it to read tmp.fs files
2901433 firstboot mkfsf2fs rcboot
2c4afb7 blockmount mmc
465ca98 adds industrial i/o (iio) nodedev
82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon
7df78bd ubus: "support" older ubusd versions that run as root
4458bce swconfig: allow using terminal (to print output)
e8d606d sslcert: openssl linked: this shaves off 200 bytes
93afffb jshn ntpdhotplug
0b847f0 wpad: reads /etc/ssl/openssl.cnf
f14ee34 indent fix
a0c7cad mtd, uhttpd, ubus and ntpdhotplug
d74f98f adds a not about checkreqprot requirement in some scenarios
affacce example: add policycoreutils-setfiles for make check
4f944dc kmodloader and fwenv:
efe36a3 netifd: adds a comment/reminder
581b087 more fw_printenv loose ends
30177a4 fw_setenv: needs mtd write access to set and delete env
da28f4c fw_printenv: some minor clean ups
a062053 fw_printenv missing rules
244ba5f blockmount: extroot and /rwm
0745a6a squid: allow squid to run sslcrtd with domain transition
b851df6 squid fix
8c55acd squid: adds certfile and allow connect http but...
b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid)
5ff39bd squid: forgot about luci
5366c97 squid/rcsquid some basic fill in
8743da6 squid skeleton
687a43b adds squid 3128 port to httpproxy port

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
3 years agobmips: add experimental ethernet support
Álvaro Fernández Rojas [Mon, 1 Mar 2021 07:21:59 +0000 (08:21 +0100)]
bmips: add experimental ethernet support

This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.

Working devices:
- Comtrend AR-5315u
- Comtrend AR-5387un
- Comtrend VR-3025u
- Comtrend VR-3032u

Not working devices:
- Netgear DGND3700 v2 (no idea on how the external switch is connected)
- Huawei HG556a ver B (BCM6358 needs a separate driveer)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agotools/libelf: remove unneeded host library
Tony Ambardar [Fri, 12 Mar 2021 01:45:05 +0000 (17:45 -0800)]
tools/libelf: remove unneeded host library

This old ELF library dating to 2009 used to be necessary on MacOS but
is not required for building the kernel or tools since [1]. On Linux
systems, libelf is already an OpenWRT build-system prerequisite [2].

Presence of the older library can mask or conflict with the system libelf
and lead to build errors, as seen compiling Linux kernels since v5.8 or
host tools such as dwarves (e.g. pahole).

Remove the unnecessary tools/libelf library and avoid the related issues.

[1] 5f8e587240 ("build: force disable stack validation during kernel build
                 on non-linux systems")
[2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites

Tested-by: Rosen Penev <rosenp@gmail.com> (Linux)
Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS)
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agoelfutils: remove host build from target package
Tony Ambardar [Tue, 26 Jan 2021 22:37:04 +0000 (14:37 -0800)]
elfutils: remove host build from target package

Commit f4da28c301 ("elfutils: Add host build") supplied a libelf host
library to fix a glib2 host build error, but this need was later removed
by b6212c8769 ("glib2: don't use libelf during host build").

More importantly, there are already two sources for libelf host libraries:
OpenWRT build prerequisites [1] and tools/libelf. A third is not needed.

Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 years agobusybox: backport fixes for 1.33.0
Hannu Nyman [Tue, 9 Mar 2021 15:46:52 +0000 (17:46 +0200)]
busybox: backport fixes for 1.33.0

Backport two fixes for 1.33.0
* history file storing
* traceroute command option parsing

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
3 years agouboot-mediatek: import fix for AHCI and enable SATA
Daniel Golle [Sat, 13 Mar 2021 19:07:09 +0000 (19:07 +0000)]
uboot-mediatek: import fix for AHCI and enable SATA

Import patch form Frank Wunderlich <frank-w@public-files.de> to fix
build of MediaTek AHCI SATA driver.
Enable that driver on Bananapi BPi-R64.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomvebu: LS421DE: make cosmetics changes in dts file
Daniel González Cabanelas [Sat, 13 Mar 2021 11:57:46 +0000 (12:57 +0100)]
mvebu: LS421DE: make cosmetics changes in dts file

Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS:
  - Delete pointless #xxx-cells
  - bootargs: replace earlyprintk with earlycon and remove unneeded args.
  - Separate pinmux nodes with empty lines.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
3 years agoxfrm: simplify the check for necessary kernel support
Alin Nastac [Mon, 1 Mar 2021 08:51:31 +0000 (09:51 +0100)]
xfrm: simplify the check for necessary kernel support

[ -d /sys/module/xfrm_interface ] is enough to check if
CONFIG_XFRM_INTERFACE support was enabled in kernel.

Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
3 years agovti: use alternative way to check if kernel support is enabled
Alin Nastac [Mon, 1 Mar 2021 08:49:43 +0000 (09:49 +0100)]
vti: use alternative way to check if kernel support is enabled

When necessary support is built in kernel, vti protocol support is
not enabled in netifd.

Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
3 years agogre: use alternative way to check if kernel support is enabled
Alin Nastac [Tue, 23 Feb 2021 12:05:09 +0000 (13:05 +0100)]
gre: use alternative way to check if kernel support is enabled

When necessary support is built in kernel, gre protocol support is
not enabled in netifd.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
3 years agokernel: bump 5.10 to 5.10.23
Kabuli Chana [Wed, 10 Mar 2021 02:19:12 +0000 (19:19 -0700)]
kernel: bump 5.10 to 5.10.23

update kernel to 5.10.23, rebase patches, deleted upstreamed patch:

target/linux/generic/backport-5.10/830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch

compile / test - mvebu / mamba, rango

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
[refresh again]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agokernel: bump 5.4 to 5.4.105
John Audia [Sun, 7 Mar 2021 12:26:24 +0000 (07:26 -0500)]
kernel: bump 5.4 to 5.4.105

Ran update_kernel.sh in a fresh clone without any existing toolchains.

Removed upstreamed generic-backports:
  830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch
  831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch
  755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
[squash patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agomediatek: image: don't use 'M' unit as dd may not support that
Daniel Golle [Sat, 13 Mar 2021 14:59:33 +0000 (14:59 +0000)]
mediatek: image: don't use 'M' unit as dd may not support that

dd on Mac OS X apparently fails when using 'M' unit for bs.
dd: bs: illegal numeric value
Use 'k' unit instead for 'pad-to' to fix that.

Reported-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agouboot-mediatek: fix build on Mac OS X
Daniel Golle [Sat, 13 Mar 2021 13:38:25 +0000 (13:38 +0000)]
uboot-mediatek: fix build on Mac OS X

Copy patch added to uboot-sunxi by commit 3cc57ba462
("uboot-sunxi: add missing type __u64") also to uboot-mediatek.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobcm47xx: make WGT634U NVRAM patch apply again
Rafał Miłecki [Fri, 12 Mar 2021 20:08:24 +0000 (21:08 +0100)]
bcm47xx: make WGT634U NVRAM patch apply again

Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: add compatibility with upstream threaded NAPI patch
Felix Fietkau [Fri, 12 Mar 2021 13:45:19 +0000 (14:45 +0100)]
kernel: add compatibility with upstream threaded NAPI patch

Enable threading if dev->threaded is set. This will be used to bring mt76 back
in sync with upstream

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agokernel: update 5.10 flow offload patches
Felix Fietkau [Mon, 8 Mar 2021 16:20:20 +0000 (17:20 +0100)]
kernel: update 5.10 flow offload patches

Includes PPPoE support and VLAN related fixes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agokernel: add pending mtd patches adding NVMEM support
Rafał Miłecki [Fri, 12 Mar 2021 17:30:01 +0000 (18:30 +0100)]
kernel: add pending mtd patches adding NVMEM support

It's meant to provide upstream support for mtd & NVMEM. It's required
e.g. for reading MAC address from mtd partition content. It seems to be
in a final shape so it's worth testing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: move mtd ofpart accepted patch
Rafał Miłecki [Fri, 12 Mar 2021 16:37:59 +0000 (17:37 +0100)]
kernel: move mtd ofpart accepted patch

Move upstream patch to the backport directory.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: add two more missed 5.10 backports
Rafał Miłecki [Fri, 12 Mar 2021 16:36:58 +0000 (17:36 +0100)]
kernel: add two more missed 5.10 backports

Those were added to 5.4 but missed while introducing 5.10 kernel.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm53xx: initialize NVRAM from NVMEM driver
Rafał Miłecki [Fri, 12 Mar 2021 17:10:09 +0000 (18:10 +0100)]
bcm53xx: initialize NVRAM from NVMEM driver

NVRAM access may be needed early in boot process. Reading it using mtd
happens quite late in the init process. Add NVRAM initialization to the
NVMEM driver which comes up early and depends on IO mapping only.

This is required by Linksys devices which use NVRAM content for proper
partitioning (detecting current firmware partition).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: backport Broadcom NVRAM driver cleanups
Rafał Miłecki [Fri, 12 Mar 2021 17:07:57 +0000 (18:07 +0100)]
kernel: backport Broadcom NVRAM driver cleanups

Refactoring of bcm47xx_nvram driver. It's used by bcm47xx and bcm53xx.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobmips: switch to upstream bcm2835-rng reset patch
Álvaro Fernández Rojas [Fri, 12 Mar 2021 13:29:51 +0000 (14:29 +0100)]
bmips: switch to upstream bcm2835-rng reset patch

This patch has been accepted upstream.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agouboot-mediatek: update configs for MT7622 devies
Daniel Golle [Thu, 11 Mar 2021 21:52:07 +0000 (21:52 +0000)]
uboot-mediatek: update configs for MT7622 devies

 * make sure USB 2.0 works (useful for UEFI-booting eg. memtest86)
 * include more useful U-Boot config options on BPi-R64.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agorealtek: drop ethtool log noise
Bjørn Mork [Thu, 11 Mar 2021 12:35:38 +0000 (13:35 +0100)]
realtek: drop ethtool log noise

Demote a number of debugging printk's to pr_debug to avoid log
nosie.  Several of these functions are called as a result of
userspace activity.  This can cause a lot of log noise when
userspace does periodic polling.

Most of this could probably be removed completely, but let's
keep it for now since these drivers are still in development.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
3 years agouboot-mediatek: update to 2021.04-rc3 with MediaTek's patches
Daniel Golle [Sat, 20 Feb 2021 13:04:38 +0000 (13:04 +0000)]
uboot-mediatek: update to 2021.04-rc3 with MediaTek's patches

MediaTek published their current U-Boot patchset on github:
https://github.com/mtk-openwrt/u-boot/commits/mtksoc

Import the platform patches from there (`00-mtk-*.patch`), arrange,
them nicely, drop no longer needed local patches and rebase on top of
U-Boot 2021.04-rc3.

Tested and works well on Linksys E8450 (snand-1ddr) as well as
Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoarm-trusted-firmware-mediatek: update to 2021-03-10
Daniel Golle [Thu, 11 Mar 2021 16:01:32 +0000 (16:01 +0000)]
arm-trusted-firmware-mediatek: update to 2021-03-10

Most prominently this adds changes which allow replacing the binary-
only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit).
This fixes build on non-Linux and/or non-x86 platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agotools: mkimage: add patches for 64-bit MediaTek BootROM
Daniel Golle [Thu, 11 Mar 2021 16:00:20 +0000 (16:00 +0000)]
tools: mkimage: add patches for 64-bit MediaTek BootROM

Add patches for mkimage to allow using it instead of the binary-only
'bromimage' tool to generate bl2 for MT7622.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agorpcd: update to git HEAD
Daniel Golle [Thu, 11 Mar 2021 00:23:11 +0000 (00:23 +0000)]
rpcd: update to git HEAD

 d3f2041 uci: manually clear uci_ptr flags after uci_delete() operations
 ccb7517 sys: packagelist: drop ABI version from package name

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoopkg: update to git HEAD
Daniel Golle [Thu, 11 Mar 2021 00:22:12 +0000 (00:22 +0000)]
opkg: update to git HEAD

 d71856a pkg: pass-through ABIVersion to status file

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobcm53xx: backport NVMEM NVRAM driver
Rafał Miłecki [Wed, 10 Mar 2021 22:22:18 +0000 (23:22 +0100)]
bcm53xx: backport NVMEM NVRAM driver

It supports NVRAM access described using DT binding. Right now NVRAM
data is exposed using /sys/bus/nvmem/ only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agoRevert "bcm53xx: add support for reading NVRAM based on DT mapping"
Rafał Miłecki [Wed, 10 Mar 2021 21:28:30 +0000 (22:28 +0100)]
Revert "bcm53xx: add support for reading NVRAM based on DT mapping"

This reverts commit b0376462c164344d6be9fe1568a9f13ffd8fbb16. Those
changes were rejected and were replaced with an NVMEM driver.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agoglibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)
Hans Dedecker [Wed, 10 Mar 2021 19:48:02 +0000 (20:48 +0100)]
glibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)

a151f2e05a nscd: Fix double free in netgroupcache [BZ #27462]
ee9f98d9ca x86: Set minimum x86-64 level marker [BZ #27318]
3e880d7337 nss: Re-enable NSS module loading after chroot [BZ #27389]
71b2463f61 x86: Add CPU-specific diagnostics to ld.so --list-diagnostics
a1eb3915e7 x86: Automate generation of PREFERRED_FEATURE_INDEX_1 bitfield
33dc1dd602 ld.so: Implement the --list-diagnostics option
8d4241b897 string: Work around GCC PR 98512 in rawmemchr
6efa2d44c8 S390: Add new hwcap values.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 years agonetifd: add a udhcpc.user placeholder script
Rui Salvaterra [Tue, 9 Mar 2021 22:22:09 +0000 (22:22 +0000)]
netifd: add a udhcpc.user placeholder script

Document the existence of this feature. This allows the user to execute a script
at each DHCPv4 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
3 years agoodhcp6c: add a odhcp6c.user placeholder script
Rui Salvaterra [Tue, 9 Mar 2021 22:16:05 +0000 (22:16 +0000)]
odhcp6c: add a odhcp6c.user placeholder script

Document the existence of this feature. This allows the user to execute a script
at each DHCPv6 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
3 years agoinclude: store ABIVersion in Packages index
Paul Spooren [Mon, 8 Mar 2021 04:09:32 +0000 (18:09 -1000)]
include: store ABIVersion in Packages index

With the existence of ABI versions there is no clean way to determine
the package name without an attached ABI version. The Packages index is
stored on device to know what packages are installed.

The ABIVersion was recently removed in c921650382 "build: drop ABI
version from metadata", while ABI versions still exists. This becomes a
problem if a user tries to export installed packages via `ubus call
rpcd-sys packagelist` which would return package names including the ABI
version. Trying to find these packages in a later release with changes
ABI version is impossible.

This commits adds the `ABIVersion` field again. Knowing both the
combined (SourceName + ABIVersion) and the `ABIVersion` it is possible
to calculate the package `SourceName` without storing it in the
on-device package list.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agoarm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NAND
Daniel Golle [Mon, 8 Mar 2021 21:27:07 +0000 (21:27 +0000)]
arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NAND

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agocheckpolicy: update to version 3.2
Dominick Grift [Sat, 6 Mar 2021 20:02:41 +0000 (21:02 +0100)]
checkpolicy: update to version 3.2

521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1
42ae834a libsepol,checkpolicy: optimize storage of filename transitions

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
3 years agosecilc: update to version 3.2
Dominick Grift [Sat, 6 Mar 2021 20:02:40 +0000 (21:02 +0100)]
secilc: update to version 3.2

49ff851c secilc: fixes cil_role_statements.md example
03881703 secilc/docs: add custom color theme
4c8d6094 secilc/docs: add syntax highlighting for secil
057d72af secilc/docs: use fenced code blocks for cil examples
e8bcdb84 cil_network_labeling_statements: fixes nodecon examples
eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes
9e9b8103 secilc/docs: document expandtypeattribute
fbe1e526 Update the cil docs to match the current behaviour.

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>