ar71xx: use a backported patch to fix AR933x UART baud rate calculation
[openwrt/openwrt.git] / target / linux / lantiq /
2012-12-28 Felix Fietkaumips: use -mno-branch-likely for kernel and userspace...
2012-12-22 John Crispinar9 did not load atm driver properly
2012-12-21 John Crispindont use input layer for gpio buttons
2012-12-21 John Crispindefault switch setup for WBMR
2012-12-21 John CrispinSetting the MDC clock to 2.5MHz and changing the mii...
2012-12-21 John Crispinadds script to set wps info on boards with a wps button
2012-12-21 John Crispinminor tweaks to WBMR image
2012-12-21 John Crispinadd missing PHY_BASIC_FEATURES to 100mbit phys
2012-12-21 John Crispinfix typo inside fritz3370 devicetree file
2012-12-21 John Crispinmore devicetree fixes
2012-12-21 John Crispinimprove button handling
2012-12-21 John Crispinadd phy-reset gpio handling to xrx200-net
2012-12-21 John Crispinadd more lantiq phy ids based on daniels uboot code
2012-12-21 John Crispinrefresh patch and install v1.1 gphy blobs
2012-12-19 John Crispinadds a fix for ar8216 mii detection on etop driver
2012-12-19 Mirko VogtDo not use deprecated path to functions.sh (/etc/functi...
2012-12-19 John Crispinminor basefiles fixes
2012-12-19 John Crispinfix gptu clocks
2012-12-19 John Crispinmore board file fixes
2012-12-18 John Crispinfix gptu patch - tapi should now load
2012-12-18 John Crispinupdate to 3.7.1
2012-12-16 John Crispinmake pinctrl-falcon honour status="disbaled";
2012-12-16 John Crispinfix falcon profile
2012-12-16 John Crispinfix i2c-lantiq module
2012-12-16 John Crispinadd falcon devicetree files
2012-12-15 John Crispinselect hcd as a default package for the dgn3500
2012-12-15 John CrispinEASY80920 has 2 usb ports
2012-12-15 John Crispinremove 3.3 and 3.6
2012-12-15 John Crispincleanup basefiles
2012-12-15 John Crispinclean up modules.mk
2012-12-15 John Crispinadd devicetrees
2012-12-15 John Crispinadd linux-v3.7
2012-12-11 Gabor Juhoskernel: update linux 3.6 to 3.6.10
2012-12-08 Gabor Juhoskernel: update linux 3.6 to 3.6.9
2012-11-29 Gabor Juhosremove common symbols from 3.6 configs
2012-11-29 Gabor Juhosremove common symbols from 3.3 configs
2012-11-29 Gabor Juhoskernel: update linux 3.6 to 3.6.8
2012-11-21 John Crispinadds proper package selection for dgn3500
2012-11-18 Gabor Juhoskernel: update linux 3.6 to 3.6.7
2012-11-13 John Crispinfixes ar9 / dgn3500 support
2012-11-09 John Crispinadd more profiles
2012-11-09 John Crispina few more dts files (WIP)
2012-11-09 John Crispinadd mtd split and atm patch
2012-11-06 John Crispinadd OWRTDTB marker patch
2012-11-06 John Crispinadd support for arv7525
2012-11-05 Gabor Juhoskernel: update linux 3.6 to 3.6.6
2012-11-03 John Crispin3.6 is not the default yet
2012-11-02 John Crispinadds dts files and make devicetree images buildable
2012-11-02 John Crispinupdate ase target for 3.6
2012-11-02 John Crispinadd subtarget, as of 3.6 we dont seperate xway SoC
2012-11-02 John Crispinadds 3.6 files, patches and config
2012-11-02 John Crispinmove files/ -> files-3.3/
2012-11-02 John Crispinprepare Makefile for 3.6
2012-10-29 Gabor Juhostarget: refresh all target configs with kconfig.pl
2012-10-17 John Crispindrop GPIODEV platform code
2012-09-28 John Crispintapi was not registeredproperly for most arcadyan boards
2012-09-13 Gabor Juhosgeneric: move GENERIC_PWM symbol into the generic config
2012-09-06 Luka Perkovlantiq: fix sx76x default uci network configuration
2012-08-08 John Crispinpci gpio mapping
2012-08-04 John CrispinW502V/ARV4525 wireless mac bugfix
2012-08-03 John Crispincleanup patches
2012-08-02 John Crispinfixes i2c clock enable
2012-07-31 John Crispinadd lantiq svip support
2012-07-24 John Crispinrebase config-3.3
2012-07-24 John Crispinmove CONFIG_ETHERNET_PACKET_MANGLE to a generic config...
2012-06-05 John Crispinclean up generic image building
2012-06-05 John Crispinbump to 3.3.8
2012-06-04 Luka Perkovuboot-envtools: update to 2012.04.01
2012-06-02 John Crispinadds unset Kbuild symbol
2012-05-30 John Crispinadds patch to make Tantos (psb6970) switch buildable...
2012-05-29 Gabor Juhoslantiq: use the generic uci-default functions for initi...
2012-05-27 John Crispinmove files-3.3 -> files
2012-05-27 John Crispin3.2 R.I.P.
2012-05-27 John Crispindgn3500 support with eeprom loading from sysfs
2012-05-27 John Crispinfixes zyxel p2601hnfx
2012-05-27 John CrispinAdd basic configuration for new board ZTE H201L. Still...
2012-05-23 Gabor Juhoskernel: update linux 3.3 to 3.3.7
2012-05-20 Felix Fietkaulantiq: allow platforms with rt2x00 to override the...
2012-05-15 Gabor Juhoslinux: move certain disabled symbols to the generic...
2012-05-15 John Crispincode style cleanup of the mach files
2012-05-15 John Crispinadds zyxel p2601hnfx support
2012-05-15 John Crispinset 3.3.6 as default
2012-05-14 John Crispinset 3.3.5 as default
2012-05-14 Gabor Juhoskernel: update linux 3.3 to 3.3.6
2012-05-09 John CrispinAdd 3.3 config files
2012-05-09 John CrispinAdd missing 3.3 patches
2012-05-09 John CrispinDrop 2.6.32 support
2012-05-07 Gabor Juhoskernel: update linux 3.3 to 3.3.5
2012-05-06 Felix Fietkaukernel: rewrite the phy packet hook, put it in the...
2012-04-30 Gabor Juhoskernel: update linux 3.3 to 3.3.4
2012-04-24 Jonas Gorskikernel: update linux 3.2 to 3.2.16
2012-04-23 John CrispinAdding wifi eeprom extract for ARV752DPW - Easybox 802
2012-04-21 Mirko Vogtchange /etc/config/network according to actual VLAN...
2012-04-17 Jonas Gorskikernel: also update the targets to use 3.2.15
2012-04-17 Jonas Gorskikernel: update linux 3.3 to 3.3.2
2012-04-17 Jonas Gorskikernel: update linux 3.2 to 3.2.15
2012-04-16 John Crispinadds 3.3 patches and files
2012-04-12 John Crispinupdate 3.2 patches
2012-04-09 Jonas Gorskikernel: update linux 3.2 to 3.2.14
2012-04-05 John Crispinadd Easybox 802 - ARV752DPW
next