openwrt/staging/yousong.git
7 years agolantiq: set the internet led interface according to wan interface
Mathias Kresin [Fri, 17 Feb 2017 21:16:01 +0000 (22:16 +0100)]
lantiq: set the internet led interface according to wan interface

Use the nas0 interface for the netdev trigger as default. Use the ptm0
interface for xRX200 boards to match the default wan interface set in
02_network.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agolantiq: introduce lantiq_is_vdsl_system
Mathias Kresin [Fri, 17 Feb 2017 21:04:12 +0000 (22:04 +0100)]
lantiq: introduce lantiq_is_vdsl_system

Move the code to check if the current system is a system with vdsl
support to a dedicate function to make it reusable.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agolantiq: fix ARV7519RW22 switch port indexing
Mathias Kresin [Thu, 2 Feb 2017 23:59:16 +0000 (00:59 +0100)]
lantiq: fix ARV7519RW22 switch port indexing

Fixes FS#454.

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agoodhcp6c: fix PKG_MIRROR_HASH
Hans Dedecker [Fri, 17 Feb 2017 14:45:08 +0000 (15:45 +0100)]
odhcp6c: fix PKG_MIRROR_HASH

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agouhttpd: use sha256 when generating certificates with openssl (FS#512)
Felix Fietkau [Fri, 17 Feb 2017 13:21:47 +0000 (14:21 +0100)]
uhttpd: use sha256 when generating certificates with openssl (FS#512)

Patch from attachment to FS#512

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agolibpcap: remove feature dependencies on kmod-* packages
Felix Fietkau [Fri, 17 Feb 2017 09:04:16 +0000 (10:04 +0100)]
libpcap: remove feature dependencies on kmod-* packages

USB support could be built into the kernel as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agodropbear: bump PKG_RELEASE
Stijn Tintel [Fri, 17 Feb 2017 11:18:58 +0000 (12:18 +0100)]
dropbear: bump PKG_RELEASE

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agoar71xx: fix ethernet PLL configuration for QCA956x
Felix Fietkau [Fri, 17 Feb 2017 10:51:42 +0000 (11:51 +0100)]
ar71xx: fix ethernet PLL configuration for QCA956x

QCA956x is configured like AR934x, not like the older chips.
Should fix ethernet hangs when using the WAN port without SGMII

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: fix lan ports on archer C59 and C60
Henryk Heisig [Thu, 16 Feb 2017 14:22:49 +0000 (15:22 +0100)]
ar71xx: fix lan ports on archer C59 and C60

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
7 years agox86: Set default baud rate on Geode images to 115200
David Woodhouse [Wed, 15 Feb 2017 17:27:45 +0000 (17:27 +0000)]
x86: Set default baud rate on Geode images to 115200

Prior to commit 1496b95a0 ("x86: clean up default grub baudrate
settings") we had three different baud rates for the Geode targets:
19200 for net5501, 38400 for alix2, and 115200 for Geos.

It doesn't seem that there's a very good reason for varying from our
default 115200 baud, so let's make the Geode target do that instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
7 years agox86: Add Geos profile for Geode subtarget
David Woodhouse [Wed, 15 Feb 2017 16:11:12 +0000 (16:11 +0000)]
x86: Add Geos profile for Geode subtarget

This makes the Geode images actually useful again. The Geos profile
should include the relevant hardware for that board, and the Default
profile adds the via-rhine adapter which seems to have been present in
the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge
all geode based subtargets into one").

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
7 years agoar71xx: add support for 8devices Lima board
Karol Dudek [Sun, 12 Feb 2017 17:34:36 +0000 (18:34 +0100)]
ar71xx: add support for 8devices Lima board

Lima is a module for the (IoE) internet of everything applications,
based on Qualcomm/Atheros QCA4531.

Specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 32 MB of FLASH
- 2T2R 2.4 GHz
- 2x 10/100 Mbps Ethernet
- USB 2.0 Host
- PCIe
- UART for serial console
- 14x GPIO

Flash instruction:
1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin
and rename it to 8dev_recovery.bin
2. Binary file copy to USB stick and plug into slot USB
3. Press S2 (reset) button
4. Press and hold the S1 button by 5 seconds
5. Wait ~40 seconds to complete recovery

Tested on:

- Lima development kit

Signed-off-by: Karol Dudek <karoiz@sli.pl>
7 years agomediatek: add more missing symbols
John Crispin [Thu, 16 Feb 2017 19:15:52 +0000 (20:15 +0100)]
mediatek: add more missing symbols

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoipq806x: add v4.9 support
John Crispin [Thu, 16 Feb 2017 11:25:25 +0000 (12:25 +0100)]
ipq806x: add v4.9 support

Signed-off-by: John Crispin <john@phrozen.org>
7 years agomediatek: add config file for v4.9
John Crispin [Thu, 16 Feb 2017 13:13:39 +0000 (14:13 +0100)]
mediatek: add config file for v4.9

Signed-off-by: John Crispin <john@phrozen.org>
7 years agomvebu: add linux 4.9 support
Felix Fietkau [Mon, 6 Feb 2017 10:46:48 +0000 (11:46 +0100)]
mvebu: add linux 4.9 support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years agoar8216: flush ARL table during reset after init_globals
Günther Kelleter [Wed, 15 Feb 2017 09:36:49 +0000 (10:36 +0100)]
ar8216: flush ARL table during reset after init_globals

commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df
"ar8216: adjust ATU flushing in case of link changes"
introduced portwise flushing on link down events. Now the ARL table could
be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped
forever (depending on the entries collected while booting).

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
7 years agomediatek: bump to v4.9
John Crispin [Thu, 16 Feb 2017 08:53:03 +0000 (09:53 +0100)]
mediatek: bump to v4.9

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoramips: fix the number of uarts for MT7688
Furong Xu [Thu, 16 Feb 2017 03:10:28 +0000 (11:10 +0800)]
ramips: fix the number of uarts for MT7688

Same as MT7621 and MT7628, MT7688 allows up to 3 uarts

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agoramips: fix PWM pin mux conflict in dtsi
Furong Xu [Thu, 16 Feb 2017 02:00:48 +0000 (10:00 +0800)]
ramips: fix PWM pin mux conflict in dtsi

GPIO18 and GPIO19 on OMEGA2(+) should be GPIO mode, enable PWM lead to a conflict

[    0.290633] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
[    0.299722] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
[    0.305729] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0  on device rt2880-pinmux
[    0.315131] mtk-pwm 10005000.pwm: Error applying setting, reverse things back

Keep PWM disabled.

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agougps: fix typo
Cezary Jackiewicz [Wed, 15 Feb 2017 18:06:04 +0000 (19:06 +0100)]
ugps: fix typo

Removing redundant spaces from the name of the option. Without fix:

root@LEDE:~# opkg install ugps
Installing ugps (2016-10-24-32a6b2b7-1) to root...
Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mips_24kc/base/ugps_2016-10-24-32a6b2b7-1_mips_24kc.ipk
Configuring ugps.
uci: Parse error (invalid character in name field) at line 3, byte 23
uci: Parse error (invalid character in name field) at line 3, byte 23
sh: out of range
root@LEDE:~# uci show gps
uci: Parse error (invalid character in name field) at line 3, byte 23

With this fix:

root@LEDE:~# uci show gps
gps.@gps[0]=gps
gps.@gps[0].tty='ttyACM0'
gps.@gps[0].adjust_time='1'

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
7 years agobuild: fix the toolchain rebuild check
Felix Fietkau [Thu, 16 Feb 2017 06:43:27 +0000 (07:43 +0100)]
build: fix the toolchain rebuild check

- Check for changes in toolchain/ only
- Only replace the stamp file if it was changed
- Fix dependencies for staging dir prepare
- Move the stamp file to TOOLCHAIN_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: update kernel 4.4 to version 4.4.49
Hauke Mehrtens [Wed, 15 Feb 2017 23:36:29 +0000 (00:36 +0100)]
kernel: update kernel 4.4 to version 4.4.49

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agokernel: update kernel 4.9 to version 4.9.10
Hauke Mehrtens [Wed, 15 Feb 2017 20:54:37 +0000 (21:54 +0100)]
kernel: update kernel 4.9 to version 4.9.10

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobrcm47xx: fix button inversion for Asus WL-500W
Mirko Parthey [Tue, 14 Feb 2017 21:38:17 +0000 (22:38 +0100)]
brcm47xx: fix button inversion for Asus WL-500W

The Asus WL-500W buttons are active high,
but the software treats them as active low.
Fix the inverted logic.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agobrcm47xx: fix USB driver choice for Asus WL-500W
Mirko Parthey [Tue, 14 Feb 2017 14:05:09 +0000 (15:05 +0100)]
brcm47xx: fix USB driver choice for Asus WL-500W

BCM4704 SoC has only USB 1.1 core:
ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243)
but this device actually comes with two USB 2.0 ports.

It appears embedded controller isn't used but instead there are two PCI
attached controllers (next to the BCM4321 wireless card):
1106:3038 VT82xx/62xx UHCI USB 1.1 Controller
1106:3104 USB 2.0

Choose a set of USB drivers which actually support this hardware.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agotoolchain: force a full rebuild on buildbot if the toolchain changed
Felix Fietkau [Wed, 15 Feb 2017 14:15:46 +0000 (15:15 +0100)]
toolchain: force a full rebuild on buildbot if the toolchain changed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoqos-scripts: fix module load commands (FS#438)
Felix Fietkau [Wed, 15 Feb 2017 13:00:24 +0000 (14:00 +0100)]
qos-scripts: fix module load commands (FS#438)

fq_codel is built-in, and xt_CONNMARK is provided by the xt_connmark
module

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agobuild: skip headers install and config on make target/linux/prepare
Felix Fietkau [Wed, 15 Feb 2017 11:34:52 +0000 (12:34 +0100)]
build: skip headers install and config on make target/linux/prepare

This simplifies working with quilt on the kernel tree

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: fix crashes on MIPS when loading kernel modules under memory pressure
Felix Fietkau [Wed, 15 Feb 2017 11:33:03 +0000 (12:33 +0100)]
kernel: fix crashes on MIPS when loading kernel modules under memory pressure

When memory is tight, modules may need to be loaded into vmalloc()
space. The code then has to generate jump trampolines which enable
relocations between vmalloc space and physical address space.

The code had a bug that was freeing these trampolines even when the
module was successfully loaded.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agomdns: update and rename package to the umdns
Rafał Miłecki [Wed, 15 Feb 2017 10:46:57 +0000 (11:46 +0100)]
mdns: update and rename package to the umdns

This update includes numerous small fixes for:
1) Interfaces setup
2) Packets parsing
3) Sending replies
Without this there were multiple problems with exchanging information
between (u)mdns and other implementations (including (u)mdns as well).

This also follows project rename to umdns which was required to avoid
confusion with Apple's mdnsd from mDNSResponder project.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoar71xx: add preliminary kernel support for several RB SPI NOR devices
Thibaut VARENE [Fri, 10 Feb 2017 19:36:50 +0000 (20:36 +0100)]
ar71xx: add preliminary kernel support for several RB SPI NOR devices

The cAP 2nD, mAP 2nD and wAP 2nD apparently all share the same QCA953x/SPI-NOR
platform.

This patch adds preliminary kernel support based on init data used in
Mikrotik's linux-3.3.5 kernel patch. Since this is totally experimental and
untested, the necessary glue in base-files has not been added, the code is
provided as a starting point in case somebody with that hardware wants to help
getting it supported.

The cAP lite (cAPL 2nD) should also be supported once it is determined whether
or not it uses the same board identifier as the mAP lite.

Code has been successfully built and has no side effect (no impact on already
supported devices).

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoar71xx: add new SPI NOR RB devices to the list of serial-enable patch
Thibaut VARENE [Fri, 10 Feb 2017 15:53:34 +0000 (16:53 +0100)]
ar71xx: add new SPI NOR RB devices to the list of serial-enable patch

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoar71xx: add support for RB750r2
Thibaut VARENE [Thu, 9 Feb 2017 22:07:23 +0000 (23:07 +0100)]
ar71xx: add support for RB750r2

This patch adds support for the MikroTik RouterBOARD hEX lite
https://routerboard.com/RB750r2

Specifications:
- SoC: Qualcomm QCA9531 (850MHz)
- RAM: 64MB
- Storage: 16MB NOR SPI flash
- Ethernet: 5x100M (1 PoE in)

This ethernet router is based on the same platform as the hEX PoE lite (it
shares the same board identifier), but has no USB and no PoE out.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoar71xx: add support for RB750UPr2
Thibaut VARENE [Thu, 9 Feb 2017 21:50:08 +0000 (22:50 +0100)]
ar71xx: add support for RB750UPr2

This patch adds support for the MikroTik RouterBOARD hEX PoE lite
https://routerboard.com/RB750UPr2

Specifications:
- SoC: Qualcomm QCA9531 (650MHz)
- RAM: 64MB
- Storage: 16MB NOR SPI flash
- Ethernet: 5x100M (1 PoE in, 1 PoE out)
- USB: Type A

This ethernet router is based on the same platform as the wireless router hAP.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoar71xx: add support for RB951Ui-2nD
Thibaut VARENE [Tue, 7 Feb 2017 18:10:04 +0000 (19:10 +0100)]
ar71xx: add support for RB951Ui-2nD

This patch adds support for the MikroTik RouterBOARD hAP
https://routerboard.com/RB951Ui-2nD

Specifications:
- SoC: Qualcomm QCA9531 (650MHz)
- RAM: 64MB
- Storage: 16MB NOR SPI flash
- Wireless: builtin QCA9531, 2x2:2
- Ethernet: 5x100M (1 PoE in, 1 PoE out)
- USB: Type A

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoar71xx: provide support for RB-941-2nD via mach-rbspi.c
Thibaut VARENE [Tue, 7 Feb 2017 14:23:30 +0000 (15:23 +0100)]
ar71xx: provide support for RB-941-2nD via mach-rbspi.c

This patch implements support for the hAP lite in mach-rbspi.c

hAP lite was supported via mach-rb941.c, so this file is removed
as well as the corresponding build bits.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoar71xx: add support for RB mAP L-2nD
Thibaut VARENE [Tue, 7 Feb 2017 11:06:33 +0000 (12:06 +0100)]
ar71xx: add support for RB mAP L-2nD

This patch adds support for the MikroTik RouterBOARD mAP lite
https://routerboard.com/RBmAPL-2nD

Specifications:
- SoC: Qualcomm QCA9533 (650MHz)
- RAM: 64MB
- Storage: 16MB NOR SPI flash
- Wireless: builtin QCA9533, 2x2:2
- Ethernet: 1x100M

This is another 16M SPI NOR mikrotik device. The machine file is named
mach-rbspi.c because I plan to add support for several of the other spi-based
RouterBOARD devices in subsequent patches: they share most of the hardware
and thus the same codebase.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoebtables: update to last commit
Ansuel Smith [Fri, 10 Feb 2017 15:18:47 +0000 (16:18 +0100)]
ebtables: update to last commit

Refreshed patches

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
7 years agofeeds: add option to force feed update despite modified files
Jo-Philipp Wich [Tue, 14 Feb 2017 17:35:57 +0000 (18:35 +0100)]
feeds: add option to force feed update despite modified files

Implement a new flag "-f" for the feeds update command which causes the
script to fall back to a more agressive git update strategy in case there
are locally modified files in the feeds directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoprocd: update to latest git HEAD
John Crispin [Wed, 15 Feb 2017 08:59:46 +0000 (09:59 +0100)]
procd: update to latest git HEAD

5f91241 procd: add cancel_timeout on rc scripts when a runtime_timeout is specified
961dc69 procd: stop service using SIGKILL if SIGTERM failed to do so

Signed-off-by: John Crispin <john@phrozen.org>
7 years agohostapd: mv netifd.sh hostapd.sh
Daniel Albers [Sun, 12 Feb 2017 19:23:20 +0000 (20:23 +0100)]
hostapd: mv netifd.sh hostapd.sh

same name for the file on the host and target

Signed-off-by: Daniel Albers <daniel.albers@public-files.de>
7 years agoprocd: fix default timeout for reload trigger actions
Denis Osvald [Tue, 14 Feb 2017 16:08:49 +0000 (17:08 +0100)]
procd: fix default timeout for reload trigger actions

Default trigger action timeout was added to procd.sh in commit f88e3a4c0
(procd: add default timeout for reload trigger actions)
However, the timeout value was not placed under the correct JSON-script
array nesting level and thus did not apply.

To fix this and make the timeout actually apply to the reload triggers,
we place it in the correct scope, that is the per-trigger array.

Fixes: f88e3a4c0abb60bb76a7678dd30dfdc8a808a2f1
Signed-off-by: Denis Osvald <denis.osvald@sartura.hr>
7 years agoramips: replace remaining instances of ralink, port-map
Daniel Golle [Tue, 14 Feb 2017 13:08:59 +0000 (14:08 +0100)]
ramips: replace remaining instances of ralink, port-map

Some boards were apparently forgotten when ralink,portmap was renamed
to mediatek,portmap -- probably because they used the long obsolete
ralink,port-map attribute.
If this commit breaks ethernet wan/lan assignment, this is because
the port-map attribute wasn't actually parsed, you'll have to replace
"wllll" by "llllw" in the dts file belonging to that board (and send
a patch doing that!)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agoramips: fix mt7621 ethernet support for v4.9
John Crispin [Wed, 15 Feb 2017 08:11:41 +0000 (09:11 +0100)]
ramips: fix mt7621 ethernet support for v4.9

Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: add missing symbol for v4.9
John Crispin [Wed, 15 Feb 2017 08:11:11 +0000 (09:11 +0100)]
kernel: add missing symbol for v4.9

Signed-off-by: John Crispin <john@phrozen.org>
7 years agox86: Add board configs for the PC Engines APU2
Chris Blake [Mon, 13 Feb 2017 08:01:14 +0000 (02:01 -0600)]
x86: Add board configs for the PC Engines APU2

This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
7 years agox86: Enable DIAG LED on Geos
David Woodhouse [Mon, 13 Feb 2017 13:38:33 +0000 (13:38 +0000)]
x86: Enable DIAG LED on Geos

Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
7 years agox86: Move Traverse Geos configs into x86 base-files
Chris Blake [Mon, 13 Feb 2017 08:01:13 +0000 (02:01 -0600)]
x86: Move Traverse Geos configs into x86 base-files

This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
7 years agoramips: export slic IRQ line in dwr-512
Giuseppe Lippolis [Tue, 14 Feb 2017 13:12:24 +0000 (14:12 +0100)]
ramips: export slic IRQ line in dwr-512

The DWR-512 embeds the hw slic device si3210. This device have the IRQ line
attached to the gpio1. This patch export the gpio1 with proper name and
parameters to the sysfs.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
7 years agotools: patch-image: fix file descriptor leak.
Furong Xu [Tue, 14 Feb 2017 13:25:01 +0000 (21:25 +0800)]
tools: patch-image: fix file descriptor leak.

Maybe this is committed by mistake, fix it.

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agoocteon: only copy sysupgrade file if present
John Crispin [Wed, 15 Feb 2017 05:36:21 +0000 (06:36 +0100)]
octeon: only copy sysupgrade file if present

this caused

'mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory'

when running sysupgrade -n

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoocteon: bump to v4.9
John Crispin [Mon, 13 Feb 2017 17:05:24 +0000 (18:05 +0100)]
octeon: bump to v4.9

Signed-off-by: John Crispin <john@phrozen.org>
7 years agobuild: add buildbot specific config option for setting defaults
Felix Fietkau [Tue, 14 Feb 2017 11:24:07 +0000 (12:24 +0100)]
build: add buildbot specific config option for setting defaults

This can be used to tweak the buildbot behavior without having to change
buildbot's configuration.
It will also allow us to add more aggressive clean steps (e.g. on
toolchain changes), which would break developers' workflows if enable
by default.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoramips: revert faulty 4.4 config change from 9c242270907
Felix Fietkau [Tue, 14 Feb 2017 12:47:21 +0000 (13:47 +0100)]
ramips: revert faulty 4.4 config change from 9c242270907

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: fix DEFAULT_PACKAGES for mikrotik devices
Felix Fietkau [Tue, 14 Feb 2017 12:14:38 +0000 (13:14 +0100)]
ar71xx: fix DEFAULT_PACKAGES for mikrotik devices

Include packages from the default profile for NAND devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoar71xx: Add support for D-Link EBR-2310 Rev. C
Alexandru Gagniuc [Fri, 3 Feb 2017 05:01:36 +0000 (21:01 -0800)]
ar71xx: Add support for D-Link EBR-2310 Rev. C

Add support for the EBR-2310, which is almost identical to the DIR-615
rev E4, without the wifi.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
7 years agouboot-kirkwood: fix usb of nsa310b u-boot
Alberto Bursi [Sun, 12 Feb 2017 11:08:06 +0000 (12:08 +0100)]
uboot-kirkwood: fix usb of nsa310b u-boot

fixes issue "nsa 310b u-boot can initialize usb but cannot
use usb storage so it cannot load files from usb"

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
7 years agoar71xx: add support for TP-Link TL-WA850RE v2
Piotr Dymacz [Fri, 10 Feb 2017 12:44:06 +0000 (13:44 +0100)]
ar71xx: add support for TP-Link TL-WA850RE v2

TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/391/195 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x internal antennas (embedded on PCB)
- 9x LED (all can be turned off with GPIO15), 2x button
- UART (J3) header on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in US version of the device, but should work
also with the same device version sold in other countries.

Available FLASH space, with LEDE trunk, is only 240 KB.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years agoramips: Clean duplicated status property for Omega2 WMAC in dtsi
Furong Xu [Tue, 14 Feb 2017 09:25:08 +0000 (17:25 +0800)]
ramips: Clean duplicated status property for Omega2 WMAC in dtsi

At the tail of dtsi, wmac is enabled twice, clean the first one

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agoramips: fixed sms led polarity into dwr-512 DT
Giuseppe Lippolis [Mon, 13 Feb 2017 10:36:41 +0000 (11:36 +0100)]
ramips: fixed sms led polarity into dwr-512 DT

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
7 years agoramips: WN3000RPv3: do not setup switch
Thibaut VARENE [Sun, 12 Feb 2017 16:11:08 +0000 (17:11 +0100)]
ramips: WN3000RPv3: do not setup switch

The WN3000RPv3 is a repeater with a single ethernet port. Setting up the
switch, even to disable it, is unnecessary and possibly confusing.

Configure LAN as eth0 instead.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoath10k-firmware: update qca9984 firmware
Pavel Kubelun [Fri, 10 Feb 2017 11:13:10 +0000 (14:13 +0300)]
ath10k-firmware: update qca9984 firmware

Bump qca9984 firmware.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
7 years agoar71xx: Add missing device package om-watchdog for MR1750
Sven Eckelmann [Fri, 3 Feb 2017 08:14:57 +0000 (09:14 +0100)]
ar71xx: Add missing device package om-watchdog for MR1750

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add OpenMesh A40 to OpenMesh A60 profile
Sven Eckelmann [Fri, 23 Sep 2016 07:39:06 +0000 (09:39 +0200)]
ar71xx: add OpenMesh A40 to OpenMesh A60 profile

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: extract ath10k wifi board.bin for the OpenMesh A40 board
Sven Eckelmann [Fri, 23 Sep 2016 07:40:10 +0000 (09:40 +0200)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh A40 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agopackage/uboot-envtools: add OpenMesh A40 support
Sven Eckelmann [Fri, 23 Sep 2016 07:38:34 +0000 (09:38 +0200)]
package/uboot-envtools: add OpenMesh A40 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agopackage/om-watchdog: add OpenMesh A40 support
Sven Eckelmann [Fri, 23 Sep 2016 07:38:10 +0000 (09:38 +0200)]
package/om-watchdog: add OpenMesh A40 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: enable sysupgrade for the OpenMesh A40
Sven Eckelmann [Fri, 23 Sep 2016 07:37:44 +0000 (09:37 +0200)]
ar71xx: enable sysupgrade for the OpenMesh A40

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add user-space support for the OpenMesh A40
Sven Eckelmann [Fri, 23 Sep 2016 07:36:43 +0000 (09:36 +0200)]
ar71xx: add user-space support for the OpenMesh A40

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add kernel support for the OpenMesh A40 board
Sven Eckelmann [Fri, 23 Sep 2016 07:36:10 +0000 (09:36 +0200)]
ar71xx: add kernel support for the OpenMesh A40 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: create profile and build image for the OpenMesh A60 board
Sven Eckelmann [Tue, 9 Aug 2016 14:10:16 +0000 (16:10 +0200)]
ar71xx: create profile and build image for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: extract ath10k wifi board.bin for the OpenMesh A60 board
Sven Eckelmann [Tue, 9 Aug 2016 14:12:06 +0000 (16:12 +0200)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agopackage/uboot-envtools: add OpenMesh a60 support
Sven Eckelmann [Tue, 9 Aug 2016 14:02:39 +0000 (16:02 +0200)]
package/uboot-envtools: add OpenMesh a60 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agopackage/om-watchdog: add OpenMesh A60 support
Sven Eckelmann [Tue, 9 Aug 2016 14:01:50 +0000 (16:01 +0200)]
package/om-watchdog: add OpenMesh A60 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: enable sysupgrade for the OpenMesh A60
Sven Eckelmann [Tue, 9 Aug 2016 14:00:55 +0000 (16:00 +0200)]
ar71xx: enable sysupgrade for the OpenMesh A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoscripts/om-fwupgradecfg-gen.sh: add support for the A60
Sven Eckelmann [Tue, 9 Aug 2016 14:08:01 +0000 (16:08 +0200)]
scripts/om-fwupgradecfg-gen.sh: add support for the A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add user-space support for the OpenMesh A60
Sven Eckelmann [Tue, 9 Aug 2016 14:06:45 +0000 (16:06 +0200)]
ar71xx: add user-space support for the OpenMesh A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add kernel support for the OpenMesh A60 board
Sven Eckelmann [Tue, 9 Aug 2016 13:58:08 +0000 (15:58 +0200)]
ar71xx: add kernel support for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agopackage/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support
Sven Eckelmann [Thu, 2 Jun 2016 09:33:13 +0000 (11:33 +0200)]
package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agopackage/om-watchdog: add OpenMesh OM2Pv4/-HSv4 support
Sven Eckelmann [Thu, 2 Jun 2016 09:31:47 +0000 (11:31 +0200)]
package/om-watchdog: add OpenMesh OM2Pv4/-HSv4 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4
Sven Eckelmann [Thu, 2 Jun 2016 09:29:23 +0000 (11:29 +0200)]
ar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4
Sven Eckelmann [Thu, 2 Jun 2016 09:25:00 +0000 (11:25 +0200)]
ar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4
Sven Eckelmann [Thu, 2 Jun 2016 09:23:21 +0000 (11:23 +0200)]
ar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoar71xx: Remove the v2/v3 from the OpenMesh profile names
Sven Eckelmann [Thu, 2 Jun 2016 09:06:39 +0000 (11:06 +0200)]
ar71xx: Remove the v2/v3 from the OpenMesh profile names

The list of v2/v3 devices is getting longer and makes reading the names of
the profiles unnecessary hard.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
7 years agoramips: add v4.9 support
John Crispin [Mon, 13 Feb 2017 11:38:27 +0000 (12:38 +0100)]
ramips: add v4.9 support

NAND support is missing

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoppp: honor ip6table for IPv6 PPP interfaces
Ulrich Weber [Fri, 10 Feb 2017 13:28:09 +0000 (14:28 +0100)]
ppp: honor ip6table for IPv6 PPP interfaces

as we do for IPv4 PPP interfaces. When we create the
dynamic IPv6 interface we should inherit ip6table from
main interface.

Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
7 years agoppp: add pppoe-discovery to an independent package
Florian Eckert [Tue, 7 Feb 2017 14:32:08 +0000 (15:32 +0100)]
ppp: add pppoe-discovery to an independent package

pppoe-discovery performs the same discovery process as pppoe, but does
not initiate a session

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agomvebu: append metadata to clearfog sd card images
Jonas Gorski [Mon, 13 Feb 2017 16:40:29 +0000 (17:40 +0100)]
mvebu: append metadata to clearfog sd card images

Fixes the following issue:

root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz
Saving metaconfig...
Image metadata not found
Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check 'fwtool_check_image' failed.
root@LEDE:/#

Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years agosdk: clean scripts/config before packing tarball (FS#504)
Felix Fietkau [Mon, 13 Feb 2017 10:45:43 +0000 (11:45 +0100)]
sdk: clean scripts/config before packing tarball (FS#504)

Avoids shipping potentially incompatible object files and also reduces
the tarball size

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agocns3xxx: disable watchdog until it is fixed
Felix Fietkau [Mon, 13 Feb 2017 10:30:55 +0000 (11:30 +0100)]
cns3xxx: disable watchdog until it is fixed

It has been reported to cause random reboots on some devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agokernel: add missing tracing related config symbols for linux 4.9
Felix Fietkau [Sun, 12 Feb 2017 19:31:05 +0000 (20:31 +0100)]
kernel: add missing tracing related config symbols for linux 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years agoapm821xx: adds missing symbol to v4.9 default config
John Crispin [Mon, 13 Feb 2017 09:07:57 +0000 (10:07 +0100)]
apm821xx: adds missing symbol to v4.9 default config

Signed-off-by: John Crispin <john@phrozen.org>
7 years agobase-files: Added a deprecation notice on wifi detect
David Pinilla Caparrós [Mon, 30 Jan 2017 14:44:05 +0000 (15:44 +0100)]
base-files: Added a deprecation notice on wifi detect

When running wifi detect, the user will be told on error output that
wifi detect is deprecated, that wifi config must be used instead. Also
the commit that changes it is referenced for further info.

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
7 years agobase-files: Add wifi config to wifi command usage
David Pinilla Caparrós [Mon, 30 Jan 2017 14:15:08 +0000 (15:15 +0100)]
base-files: Add wifi config to wifi command usage

Since commit 5f8f8a366136a07df661e31decce2458357c167a wifi detect does
not longer work and wifi config it's used to configure not yet
configured wireless devices.

This commit changes command usage to reflect that change.

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
7 years agoramips: added image size into dwr-512 DT
Giuseppe Lippolis [Sat, 11 Feb 2017 17:53:33 +0000 (18:53 +0100)]
ramips: added image size into dwr-512 DT

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
7 years agolayerscape: fix adjust_link for 10G & 2.5G
Yangbo Lu [Fri, 10 Feb 2017 18:03:35 +0000 (02:03 +0800)]
layerscape: fix adjust_link for 10G & 2.5G

Added a linux-4.4 patch to fix adjust_link for 10G & 2.5G.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
7 years agoramips: correct switch configuration for Newifi D1
Chuanhong Guo [Sat, 11 Feb 2017 13:32:07 +0000 (21:32 +0800)]
ramips: correct switch configuration for Newifi D1

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
7 years agolantiq: fix patching the wifi mac address on BTHOMEHUBV3A
Martin Blumenstingl [Sun, 12 Feb 2017 22:29:16 +0000 (22:29 +0000)]
lantiq: fix patching the wifi mac address on BTHOMEHUBV3A

The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.

The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device

Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
binding/owl-loader")

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
7 years agonetifd: update to git HEAD version
Hans Dedecker [Sun, 12 Feb 2017 17:09:53 +0000 (18:09 +0100)]
netifd: update to git HEAD version

f107656 netifd: Add option to configure locktime for each device
cdc0e80 interface: add prefix assignment priority support
6397f5e device: add veth support
6228d0f wireless: fix _wireless_add_process
7cc2f10 treewide: fix white space errors

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>