projects / openwrt / openwrt.git / search
| 18 hours ago | Álvaro Fernández... | generic: backport pmdomain dummy release patch [ 0.216905] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) |
commit | commitdiff | tree |
| 12 days ago | Álvaro Fernández... | bcm27xx: pull 6.6 patches from RPi repo Adds latest 6.6 patches from the Raspberry Pi repository. |
commit | commitdiff | tree |
| 2025-03-16 | Álvaro Fernández... | bcm27xx: pull 6.6 patches from RPi repo Adds latest 6.6 patches from the Raspberry Pi repository. |
commit | commitdiff | tree |
| 2025-02-24 | Daniel Golle | linux-firmware: update to 20250211 0f3495ac WHENCE: Link the Raspberry Pi CM5 and 500 to the 4B |
commit | commitdiff | tree |
| 2024-12-28 | Álvaro Fernández... | bcm27xx: pull 6.6 patches from RPi repo Adds latest 6.6 patches from the Raspberry Pi repository. |
commit | commitdiff | tree |
| 2024-06-23 | Mathew McBride | armsr: add realtek and smsc ethernet phy drivers to... SMSC has been used on various Raspberry Pi boards. |
commit | commitdiff | tree |
| 2024-06-19 | Álvaro Fernández... | bcm27xx: switch default kernel to 6.6 ...kernel version to 6.6 for the Raspberry Pi devices. |
commit | commitdiff | tree |
| 2024-05-01 | Elbert Mai | bcm27xx: correct cmdline.txt consoles for procd kernel command line. This affects Raspberry Pi builds because cmdline.txt procd opens the virtual console on Raspberry Pi. This completely disables |
commit | commitdiff | tree |
| 2024-03-04 | Álvaro Fernández... | base-files: sysupgrade: allow overriding config restore Some platforms like Raspberry Pi require patching some backup files... |
commit | commitdiff | tree |
| 2024-02-05 | Álvaro Fernández... | bcm27xx: add isp-bcm2835 kernel module ...bcm2835 enables ISP HW on the Raspberry Pi. |
commit | commitdiff | tree |
| 2024-02-05 | Álvaro Fernández... | bcm27xx: add codec-bcm2835 kernel module Raspberry Pi. |
commit | commitdiff | tree |
| 2024-02-05 | Álvaro Fernández... | bcm27xx: enable video symbols ..._MEDIA_CONTROLLER has to be enabled for Raspberry Pi V4L2 drivers. |
commit | commitdiff | tree |
| 2024-02-05 | Álvaro Fernández... | kernel: 6.1: add bcm27xx video symbols Add missing Raspberry Pi video symbols. |
commit | commitdiff | tree |
| 2024-02-01 | Álvaro Fernández... | bcm27xx: bcm2712: remove boot-2711 image files According to Raspberry Pi documentation, the RPi 5 First... |
commit | commitdiff | tree |
| 2024-01-27 | Álvaro Fernández... | mac80211: brcm: fix warning on ARCH_BCM2835 ... brcm: disable dump_survey on Raspberry Pi") |
commit | commitdiff | tree |
| 2024-01-26 | Álvaro Fernández... | iwinfo: update to latest git HEAD ...MT7916AN and Cypress CYW43455 (Raspberry Pi 5) devices. |
commit | commitdiff | tree |
| 2024-01-26 | Álvaro Fernández... | mac80211: brcm: disable dump_survey on Raspberry Pi ... brcm: disable dump_survey on Raspberry Pi ...this causes slow iwinfo calls on Raspberry Pi and LuCI slows down |
commit | commitdiff | tree |
| 2024-01-26 | Álvaro Fernández... | mac80211: brcm: remove alternative DT firmware names... ...patch has been reverted in the Raspberry Pi linux repository. |
commit | commitdiff | tree |
| 2024-01-25 | Marty Jones | bcm27xx: add new bcm2712 subtarget This patch adds support for Raspberry Pi 5. Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to - Raspberry Pi standard 40-pin header |
commit | commitdiff | tree |
| 2024-01-25 | Marty Jones | linux-firmware: add Raspberry Pi 5 NVRAM linux-firmware: add Raspberry Pi 5 NVRAM |
commit | commitdiff | tree |
| 2024-01-25 | Marty Jones | bcm27xx: update 6.1 patches to latest version Add support for BCM2712 (Raspberry Pi 5). and rpi-6.1.y from raspberry pi kernel source: |
commit | commitdiff | tree |
| 2024-01-16 | Marty Jones | bcm27xx-userland: update to latest version deprecated but funcional up to raspberry pi 5. |
commit | commitdiff | tree |
| 2023-12-28 | Chuanhong Guo | package: new package for usb gadget setup ...with only a USB device port (e.g. Raspberry Pi |
commit | commitdiff | tree |
| 2023-10-13 | Michael Pratt | tools/cmake: disable cmake script debugger like arm-linux-gnueabihf (Raspberry Pi 4), and takes up |
commit | commitdiff | tree |
| 2023-08-15 | Mathew McBride | armsr: armv8: add bcmgenet (Raspberry Pi 4 GENET) to... armsr: armv8: add bcmgenet (Raspberry Pi 4 GENET) to profile Raspberry Pi 4. |
commit | commitdiff | tree |
| 2023-08-15 | Mathew McBride | armsr: armv8: add Broadcom GENET and MDIO modules Tested on the RPi4B using the Raspberry Pi |
commit | commitdiff | tree |
| 2023-08-15 | Mathew McBride | armsr: armv8: enable Broadcom arch'es CONFIG_ARCH_BCM2835 (= BCM2711 like Raspberry Pi 4) |
commit | commitdiff | tree |
| 2023-01-15 | Harm Berntsen | ramips: mt7621: Add Arcadyan WE420223-99 support ...flash chip to a flasher, e.g. a Raspberry Pi. Also |
commit | commitdiff | tree |
| 2022-12-28 | Álvaro Fernández... | bcm27xx: fix BCMGENET kernel config for the Raspberry Pi. |
commit | commitdiff | tree |
| 2022-12-15 | Johannes Heimansberg | bcm27xx: bcm2711: add kmod-r8169 ...carrier boards [1][2] for the Raspberry Pi CM4 that are specifically ...working by default. Since the Raspberry Pi 4 and the |
commit | commitdiff | tree |
| 2022-11-15 | Kuan-Yi Li | linux-firmware: broadcom: use symlink to provide NVRAM... Some Raspberry Pi boards do not have dedicated NVRAM... |
commit | commitdiff | tree |
| 2022-11-15 | Kuan-Yi Li | cypress-nvram: use symlink to provide NVRAM for some... Some Raspberry Pi boards do not have dedicated NVRAM... |
commit | commitdiff | tree |
| 2022-07-20 | Hauke Mehrtens | wolfssl: Do not activate HW acceleration on armvirt... like a Raspberry Pi. If we set WOLFSSL_HAS_CPU_CRYPTO... Some targets like the Raspberry Pi do not support the ARM CPU crypto |
commit | commitdiff | tree |
| 2022-07-11 | Lech Perczak | imx: cortexa7: add support for TechNexion PICO-PI-IMX7D the well-known "Raspberry Pi" form factor, comprising of PICO... |
commit | commitdiff | tree |
| 2022-07-01 | Stijn Tintel | bcm27xx: add support for Raspberry Pi Zero 2 bcm27xx: add support for Raspberry Pi Zero 2 wireless chips used in the Raspberry Pi Zero 2 W. To have working ...to the sdcard, place it in the Raspberry Pi |
commit | commitdiff | tree |
| 2022-07-01 | Stijn Tintel | mac80211: read alternative brcm fw names from DT This patch is required for the Raspberry Pi Zero 2 W. |
commit | commitdiff | tree |
| 2022-06-19 | Mark Mentovai | failsafe: run on all consoles listed in /proc/cmdline including x86 and bcm27xx (Raspberry Pi). |
commit | commitdiff | tree |
| 2022-04-07 | Piotr Dymacz | bcm27xx: include 'rtc' in target's 'FEATURES' ...many ways to add external RTC to Raspberry Pi boards. Let's |
commit | commitdiff | tree |
| 2022-03-19 | Josef Schlehofer | cypress-firmware: update it to version 5.4.18-2021_0812 ...Seeedstudio router powered by Raspberry Pi 4 CM with |
commit | commitdiff | tree |
| 2022-03-19 | Josef Schlehofer | bcm27xx: bcm2711: add kmod-usb-net-lan78xx ...Seeedstudio in their product [1] with Raspberry Pi Raspberry Pi 4 and even Compute Module 4 has... |
commit | commitdiff | tree |
| 2021-11-20 | Nian Bohung | cypress-nvram: fix firmware is not exist for raspberry... ...fix firmware is not exist for raspberry pi compute 4 |
commit | commitdiff | tree |
| 2021-11-19 | Bastian Bittorf | mac80211: fix IBSS/adhoc mode for brcmfmac On systems using brmcfmac (e.g. Raspberry Pi Zero W) without this fix, |
commit | commitdiff | tree |
| 2021-06-07 | Tomas Lara | linux-firmware: update to 20210511 58825f7 brcm: Fix Raspberry Pi 4B NVRAM file 870b805 brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes |
commit | commitdiff | tree |
| 2021-06-05 | Josef Schlehofer | linux-firmware: update to version 20210315 and trim... 58825f7 brcm: Fix Raspberry Pi 4B NVRAM file 870b805 brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes |
commit | commitdiff | tree |
| 2021-02-07 | Daniel González... | bcm63xx: kernel: reenable the TRNG the one used by the Raspberry Pi. Now this driver is lost. |
commit | commitdiff | tree |
| 2020-12-14 | Josef Schlehofer | armvirt/64: change it to cortex-a53 instead of generic ESPRESSObin, Pine64, and Raspberry Pi 2&3. |
commit | commitdiff | tree |
| 2020-11-18 | Piotr Dymacz | ath79: add support for ALFA Network Pi-WiFi4 WiFi board in Raspberry Pi 3B shape, equipped with 1x FE... |
commit | commitdiff | tree |
| 2020-06-07 | Stijn Tintel | Revert "bcm27xx-gpu-fw: update to latest version" The Raspberry Pi firmware recently switched to... |
commit | commitdiff | tree |
| 2020-05-03 | Stijn Tintel | bcm27xx: backup /boot/cmdline.txt and restore early If you want to use the Raspberry Pi UART, "console=serial0,115200... |
commit | commitdiff | tree |
| 2020-02-29 | Álvaro Fernández... | bcm27xx: add linux 5.4 support Tested on bcm2710 (Raspberry Pi 3B). |
commit | commitdiff | tree |
| 2019-12-22 | DENG Qingfang | linux-firmware: update to 20191215 f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B |
commit | commitdiff | tree |
| 2019-10-13 | Stijn Tintel | kernel: add kmod-iio-bme680 Tested I2C and SPI modes on a Raspberry Pi Zero W. |
commit | commitdiff | tree |
| 2019-09-19 | Álvaro Fernández... | brcm2708: add support for Raspberry Pi 2B 1.2 brcm2708: add support for Raspberry Pi 2B 1.2 |
commit | commitdiff | tree |
| 2019-07-14 | Álvaro Fernández... | brcm2708: Add Raspberry Pi 4 support brcm2708: Add Raspberry Pi 4 support |
commit | commitdiff | tree |
| 2019-07-14 | Álvaro Fernández... | brcm2708-gpu-fw: add support for Raspberry Pi 4 brcm2708-gpu-fw: add support for Raspberry Pi 4 |
commit | commitdiff | tree |
| 2019-07-14 | Álvaro Fernández... | brcm2708: add linux 4.19 support Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi... |
commit | commitdiff | tree |
| 2019-02-23 | Stijn Tintel | kernel: add kmod-input-touchscreen-ads7846 ...and 4" LCD displays designed for Raspberry Pi. |
commit | commitdiff | tree |
| 2019-02-23 | Stijn Tintel | kernel: add kmod-fb-tft-ili9486 ...and 4" LCD displays designed for Raspberry Pi. |
commit | commitdiff | tree |
| 2019-02-23 | Stijn Tintel | kernel: add kmod-iio-ccs811 Tested on Raspberry Pi Zero W and ODROID C2. |
commit | commitdiff | tree |
| 2018-06-20 | Christo Nedev | brcm2708: Add wifi driver, firmware and NVRAM for Raspberry... ...driver, firmware and NVRAM for Raspberry Pi 3 b |
commit | commitdiff | tree |
| 2018-06-07 | Christo Nedev | brcm2708: Update brcm2708-gpu-fw package How Raspberry Pi boots Actualy? 76 DEVICE_TITLE := Raspberry Pi 3B/3B+ |
commit | commitdiff | tree |
| 2018-05-21 | Harvey Phillips | kernel: Add configfs support for USB HID gadget Tested on a Raspberry Pi Zero W |
commit | commitdiff | tree |
| 2018-04-27 | Christo Nedev | brcm2708: Add support for raspberry pi 3 b+. brcm2708: Add support for raspberry pi 3 b+. |
commit | commitdiff | tree |
| 2017-10-23 | Stijn Tintel | kernel: add kmod-iio-bmp280 ...modes with a BME280 sensor on a Raspberry Pi Zero W. |
commit | commitdiff | tree |
| 2017-10-23 | Stijn Tintel | brcm2708: restore /boot/config.txt before reboot The Raspberry Pi bootloader reads configuration... |
commit | commitdiff | tree |
| 2017-04-23 | Álvaro Fernández... | kernel: use skb_cow_head() to deal with cloned skbs Fixes Ethernet<->WiFi bridge for Raspberry Pi and probably other devices. |
commit | commitdiff | tree |
| 2017-04-14 | Rafał Miłecki | kernel: backport Broadcom thermal drivers ...includes driver for Northstar and for Raspberry Pi. |
commit | commitdiff | tree |
| 2017-03-24 | Rafał Miłecki | brcm2708: rename all patches from raspberrypi git tree... in LEDE. Raspberry Pi is getting better and better mainline... |
commit | commitdiff | tree |
| 2017-03-08 | Stijn Tintel | brcm2708: detect Raspberry Pi Zero W brcm2708: detect Raspberry Pi Zero W |
commit | commitdiff | tree |
| 2017-03-04 | Álvaro Fernández... | brcm2708: add support for the new Raspberry Pi Zero W brcm2708: add support for the new Raspberry Pi Zero W |
commit | commitdiff | tree |
| 2017-03-04 | Álvaro Fernández... | brcm2708: update linux 4.9 patches to latest version ...extracted and rebased from the raspberry pi repo: |
commit | commitdiff | tree |
| 2017-02-07 | Álvaro Fernández... | brcm2708: bcm2710: add 64 bit support for Raspberry... ...bcm2710: add 64 bit support for Raspberry Pi 3 64 bit support for Raspberry Pi 3 is experimental. However, bcm2709... |
commit | commitdiff | tree |
| 2017-02-07 | Álvaro Fernández... | brcm2708: bcm2709: add support for Raspberry Pi 3 brcm2708: bcm2709: add support for Raspberry Pi 3 This adds support for Raspberry Pi 3 on the bcm2709 subtarget, in... |
commit | commitdiff | tree |
| 2017-02-07 | Álvaro Fernández... | mac80211: brcmfmac: update Raspberry Pi patches for... mac80211: brcmfmac: update Raspberry Pi patches for linux 4.9 |
commit | commitdiff | tree |
| 2017-02-07 | Álvaro Fernández... | brcm2708: add linux 4.9 support Patches from Raspberry Pi repo: |
commit | commitdiff | tree |
| 2017-02-07 | Álvaro Fernández... | brcmfmac: improve Raspberry Pi 3 stability brcmfmac: improve Raspberry Pi 3 stability |
commit | commitdiff | tree |
| 2017-02-06 | Álvaro Fernández... | brcm2708: update linux 4.4 patches to latest version ...extracted and rebased from the raspberry pi repo: |
commit | commitdiff | tree |
| 2016-12-04 | Álvaro Fernández... | brcm2708: update linux 4.4 patches to latest version ...extracted and rebased from the raspberry pi repo: |
commit | commitdiff | tree |
| 2016-12-04 | Álvaro Fernández... | kernel: bump to 4.4.36 ...run tested: brcm2708/bcm2710 - Raspberry Pi 3 |
commit | commitdiff | tree |
| 2016-09-10 | Álvaro Fernández... | brcm2708: update linux 4.4 patches to latest version ...extracted and rebased from the raspberry pi repo: Also adds support for Raspberry Pi Compute Module 3 (untested). |
commit | commitdiff | tree |
| 2016-07-09 | Álvaro Fernández... | brcm2708: update linux 4.4 patches to latest version ...extracted and rebased from the raspberry pi repo: |
commit | commitdiff | tree |
| 2016-06-21 | Álvaro Fernández... | brcm2708: properly detect the Raspberry Pi Zero brcm2708: properly detect the Raspberry Pi Zero |
commit | commitdiff | tree |
| 2016-06-08 | Álvaro Fernández... | brcm2708: update linux 4.4 patches to latest version ...patches were extracted from the raspberry pi repo: |
commit | commitdiff | tree |
| 2016-04-24 | Álvaro Fernández... | brcm2708: update linux 4.4 patches to latest version ...patches were extracted from the raspberry pi repo: |
commit | commitdiff | tree |
| 2016-04-07 | Christian Lamparter | brcm2708: implement sysupgrade image check Raspberry Pi. The code only checks if the master... |
commit | commitdiff | tree |
| 2016-04-07 | Álvaro Fernández... | brcm2708: update to latest version ...patches were extracted from the raspberry pi repo: |
commit | commitdiff | tree |
| 2016-04-01 | John Crispin | brcmfmac43430-firmware: add new package ...needed for the BCM43438 included in Raspberry Pi 3. |
commit | commitdiff | tree |
| 2016-03-16 | John Crispin | brcmfmac: Add Raspberry Pi 3 support brcmfmac: Add Raspberry Pi 3 support |
commit | commitdiff | tree |
| 2016-03-08 | John Crispin | brcm2708: add Raspberry Pi 3 support brcm2708: add Raspberry Pi 3 support |
commit | commitdiff | tree |
| 2016-03-08 | John Crispin | brcm2708: update linux 4.4 patches to latest version ...patches were extracted from the raspberry pi repo: |
commit | commitdiff | tree |
| 2015-07-17 | John Crispin | brcm2708: add Raspberry Pi Compute Module support brcm2708: add Raspberry Pi Compute Module support |
commit | commitdiff | tree |
| 2015-07-14 | John Crispin | brcm2708: Implement sysupgrade Implement sysupgrade for Raspberry Pi, similar to the way it is done... |
commit | commitdiff | tree |
| 2015-02-13 | John Crispin | brcm2708: add missing config symbols and fix kernel... ...symbols and fix kernel modules for Raspberry Pi 2 by removing local version |
commit | commitdiff | tree |
| 2015-02-11 | John Crispin | brcm2708: add Raspberry Pi 2 support brcm2708: add Raspberry Pi 2 support |
commit | commitdiff | tree |
| 2014-06-02 | John Crispin | tools: genext2fs: add support for blocksize != 1024 ...is stored e.g. on a SD card (on Raspberry Pi/I2SE Duckbill for example) |
commit | commitdiff | tree |
| 2013-05-20 | Jonas Gorski | brcm2708: make it boot on revision 2 raspberry pis brcm2708: make it boot on revision 2 raspberry pis ...supports the never revision 2 raspberry pis |
commit | commitdiff | tree |
| 2012-07-24 | John Crispin | adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 |
commit | commitdiff | tree |
| 2012-07-24 | John Crispin | add mktools and dosfstools which are needed for the... ...dosfstools which are needed for the raspberry pi |
commit | commitdiff | tree |