LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.4 = .121
LINUX_VERSION-4.9 = .106
-LINUX_VERSION-4.14 = .43
+LINUX_VERSION-4.14 = .48
LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.4.121 = 44a88268b5088dc326b30c9b9133ac35a9a200b636b7268d08f32abeae6ca729
LINUX_KERNEL_HASH-4.9.106 = 2d409bb29588ea9a61bae006255ee97a675ded364c87a9ff43f687c5271bbe3c
-LINUX_KERNEL_HASH-4.14.43 = 133fc0f8f9ea04006c255a052704e8eb95a021fc799dd27f98fcfcace59e714a
+LINUX_KERNEL_HASH-4.14.48 = 80a0608f611fe7a5c54556402cdc2880a21301e1c4e1b19d4c1db82ad2bf22b9
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
#include "xhci.h"
#include "xhci-trace.h"
-@@ -244,6 +246,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -255,6 +257,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
-@@ -279,6 +733,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -290,6 +744,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
driver = (struct hc_driver *)id->driver_data;
/* For some HW implementation, a XHCI reset is just not enough... */
-@@ -343,6 +813,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -354,6 +824,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -202,7 +202,7 @@ static void xhci_pci_quirks(struct devic
+@@ -213,7 +213,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015)
+++ b/drivers/usb/host/xhci.h
@@ -1831,6 +1831,7 @@ struct xhci_hcd {
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
- /* Reserved. It was XHCI_U2_DISABLE_WAKE */
+ #define XHCI_U2_DISABLE_WAKE (1 << 27)
#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
+#define XHCI_FAKE_DOORBELL (1 << 29)
#define XHCI_SUSPEND_DELAY (1 << 30)
--- a/Makefile
+++ b/Makefile
-@@ -433,8 +433,8 @@ KBUILD_CFLAGS_MODULE := -DMODULE
+@@ -428,8 +428,8 @@ KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
GCC_PLUGINS_CFLAGS :=
/*
* IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
-@@ -149,11 +150,13 @@
+@@ -150,11 +151,13 @@
* This is an Ethernet frame header.
*/
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
-@@ -829,6 +829,7 @@ static void clusterip_net_exit(struct ne
+@@ -834,6 +834,7 @@ static void clusterip_net_exit(struct ne
cn->procdir = NULL;
#endif
nf_unregister_net_hook(net, &cip_arp_ops);
--- a/Makefile
+++ b/Makefile
-@@ -430,7 +430,7 @@ KBUILD_AFLAGS_KERNEL :=
+@@ -425,7 +425,7 @@ KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
--- a/Makefile
+++ b/Makefile
-@@ -1233,7 +1233,6 @@ all: modules
+@@ -1227,7 +1227,6 @@ all: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-@@ -1262,7 +1261,6 @@ _modinst_:
+@@ -1256,7 +1255,6 @@ _modinst_:
rm -f $(MODLIB)/build ; \
ln -s $(CURDIR) $(MODLIB)/build ; \
fi
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -787,11 +792,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
+@@ -781,11 +786,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
endif
#include <linux/bcm47xx_nvram.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
-@@ -1409,6 +1410,17 @@ static const struct ethtool_ops bgmac_et
+@@ -1410,6 +1411,17 @@ static const struct ethtool_ops bgmac_et
.set_link_ksettings = phy_ethtool_set_link_ksettings,
};
/**************************************************
* MII
**************************************************/
-@@ -1538,6 +1550,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
+@@ -1539,6 +1551,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
err = register_netdev(bgmac->net_dev);
if (err) {
dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1560,6 +1580,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
+@@ -1561,6 +1581,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
void bgmac_enet_remove(struct bgmac *bgmac)
{
static void __sk_free(struct sock *sk)
{
+#ifdef CONFIG_SOCK_DIAG
- if (unlikely(sock_diag_has_destroy_listeners(sk) && sk->sk_net_refcnt))
+ if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
sock_diag_broadcast_destroy(sk);
else
+#endif
}
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
-@@ -1944,10 +1944,12 @@ void __init init_mm_internals(void)
+@@ -1946,10 +1946,12 @@ void __init init_mm_internals(void)
start_shepherd_timer();
#endif
#ifdef CONFIG_PROC_FS
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 21 Feb 2018 13:40:12 +0100
-Subject: [PATCH] clocksource: mips-gic-timer: fix clocksource counter width
-
-This code needs to use ffs instead of fls on the mask to determine the
-shift for reading the GIC_CONFIG_COUNTBITS field.
-
-Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
-Cc: Paul Burton <paul.burton@imgtec.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/clocksource/mips-gic-timer.c
-+++ b/drivers/clocksource/mips-gic-timer.c
-@@ -164,7 +164,7 @@ static int __init __gic_clocksource_init
-
- /* Set clocksource mask. */
- count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
-- count_width >>= __fls(GIC_CONFIG_COUNTBITS);
-+ count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
- count_width *= 4;
- count_width += 32;
- gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);
+++ /dev/null
-From patchwork Thu Apr 26 23:28:34 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2] MIPS: c-r4k: fix data corruption related to cache coherence.
-X-Patchwork-Submitter: NeilBrown <neil@brown.name>
-X-Patchwork-Id: 19259
-Message-Id: <87vacdlf8d.fsf@notabene.neil.brown.name>
-To: James Hogan <jhogan@kernel.org>
-Cc: Ralf Baechle <ralf@linux-mips.org>,
- Paul Burton <paul.burton@mips.com>, linux-mips@linux-mips.org,
- linux-kernel@vger.kernel.org
-Date: Fri, 27 Apr 2018 09:28:34 +1000
-From: NeilBrown <neil@brown.name>
-List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
-
-When DMA will be performed to a MIPS32 1004K CPS, the
-L1-cache for the range needs to be flushed and invalidated
-first.
-The code currently takes one of two approaches.
-1/ If the range is less than the size of the dcache, then
- HIT type requests flush/invalidate cache lines for the
- particular addresses. HIT-type requests a globalised
- by the CPS so this is safe on SMP.
-
-2/ If the range is larger than the size of dcache, then
- INDEX type requests flush/invalidate the whole cache.
- INDEX type requests affect the local cache only. CPS
- does not propagate them in any way. So this invalidation
- is not safe on SMP CPS systems.
-
-Data corruption due to '2' can quite easily be demonstrated by
-repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum
-a file that is several times the size of available memory.
-Dropping caches means that large contiguous extents (large than
-dcache) are more likely.
-
-This was not a problem before Linux-4.8 because option 2 was
-never used if CONFIG_MIPS_CPS was defined. The commit
-which removed that apparently didn't appreciate the full
-consequence of the change.
-
-We could, in theory, globalize the INDEX based flush by sending an IPI
-to other cores. These cache invalidation routines can be called with
-interrupts disabled and synchronous IPI require interrupts to be
-enabled. Asynchronous IPI may not trigger writeback soon enough.
-So we cannot use IPI in practice.
-
-We can already test is IPI would be needed for an INDEX operation
-with r4k_op_needs_ipi(R4K_INDEX). If this is True then we mustn't try
-the INDEX approach as we cannot use IPI. If this is False (e.g. when
-there is only one core and hence one L1 cache) then it is safe to
-use the INDEX approach without IPI.
-
-This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
-eliminates the corruption.
-
-Fixes: c00ab4896ed5 ("MIPS: Remove cpu_has_safe_index_cacheops")
-Cc: stable@vger.kernel.org # v4.8+
-Signed-off-by: NeilBrown <neil@brown.name>
----
- arch/mips/mm/c-r4k.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsi
- /*
- * Either no secondary cache or the available caches don't have the
- * subset property so we have to flush the primary caches
-- * explicitly
-+ * explicitly.
-+ * If we would need IPI to perform an INDEX-type operation, then
-+ * we have to use the HIT-type alternative as IPI cannot be used
-+ * here due to interrupts possibly being disabled.
- */
-- if (size >= dcache_size) {
-+ if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
- r4k_blast_dcache();
- } else {
- R4600_HIT_CACHEOP_WAR_IMPL;
-@@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned l
- return;
- }
-
-- if (size >= dcache_size) {
-+ if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
- r4k_blast_dcache();
- } else {
- R4600_HIT_CACHEOP_WAR_IMPL;
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
-@@ -756,6 +756,24 @@ static int jffs2_mknod (struct inode *di
+@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
return ret;
}
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
struct inode *new_dir_i, struct dentry *new_dentry,
unsigned int flags)
-@@ -766,7 +784,7 @@ static int jffs2_rename (struct inode *o
+@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
uint8_t type;
uint32_t now;
return -EINVAL;
/* The VFS will check for us and prevent trying to rename a
-@@ -832,9 +850,14 @@ static int jffs2_rename (struct inode *o
+@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
if (d_is_dir(old_dentry) && !victim_f)
inc_nlink(new_dir_i);
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
-@@ -781,18 +781,31 @@ static int jffs2_rename (struct inode *o
+@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
int ret;
struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
struct jffs2_inode_info *victim_f = NULL;
victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
if (d_is_dir(new_dentry)) {
struct jffs2_full_dirent *fd;
-@@ -827,7 +840,7 @@ static int jffs2_rename (struct inode *o
+@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
if (ret)
return ret;
/* There was a victim. Kill it off nicely */
if (d_is_dir(new_dentry))
clear_nlink(d_inode(new_dentry));
-@@ -853,6 +866,12 @@ static int jffs2_rename (struct inode *o
+@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
if (flags & RENAME_WHITEOUT)
/* Replace with whiteout */
ret = jffs2_whiteout(old_dir_i, old_dentry);
else
/* Unlink the original */
ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -884,7 +903,7 @@ static int jffs2_rename (struct inode *o
+@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
return ret;
}
+++ /dev/null
-From d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 Mon Sep 17 00:00:00 2001
-From: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Date: Mon, 26 Mar 2018 16:34:39 +0200
-Subject: [PATCH] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
-
-This modem is embedded on dlink dwr-921 router.
- The oem configuration states:
-
- T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
- D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
- P: Vendor=1435 ProdID=0918 Rev= 2.32
- S: Manufacturer=Android
- S: Product=Android
- S: SerialNumber=0123456789ABCDEF
- C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
- I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
- E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
- E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
- E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
- E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
- E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
- E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
- E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
- E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
- E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
- E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
- E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
-
-Tested on openwrt distribution
-
-Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/qmi_wwan.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1105,6 +1105,9 @@ static const struct usb_device_id produc
- {QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
- {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */
- {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */
-+ {QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */
-+ {QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */
-+ {QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */
- {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
- {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
- {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */
+++ /dev/null
-From 743989254ea9f132517806d8893ca9b6cf9dc86b Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sat, 24 Mar 2018 22:08:14 +0100
-Subject: [PATCH] net: qmi_wwan: add BroadMobi BM806U 2020:2033
-
-BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
-Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
-The USB id is added to qmi_wwan.c to allow QMI communication with
-the BM806U.
-
-Tested on 4.14 kernel and OpenWRT.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/qmi_wwan.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1184,6 +1184,7 @@ static const struct usb_device_id produc
- {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
- {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */
- {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */
-+ {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */
- {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
- {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
- {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */
--- a/Makefile
+++ b/Makefile
-@@ -650,12 +650,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni
+@@ -645,12 +645,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
-@@ -3260,6 +3262,7 @@ static int packet_create(struct net *net
+@@ -3262,6 +3264,7 @@ static int packet_create(struct net *net
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
-@@ -3873,6 +3876,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3875,6 +3878,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
default:
return -ENOPROTOOPT;
}
-@@ -3925,6 +3938,13 @@ static int packet_getsockopt(struct sock
+@@ -3927,6 +3940,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;
}
static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2060,6 +2271,12 @@ static void ip6_tnl_dellink(struct net_d
+@@ -2064,6 +2275,12 @@ static void ip6_tnl_dellink(struct net_d
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
return
/* IFLA_IPTUN_LINK */
nla_total_size(4) +
-@@ -2089,6 +2306,24 @@ static size_t ip6_tnl_get_size(const str
+@@ -2093,6 +2310,24 @@ static size_t ip6_tnl_get_size(const str
nla_total_size(0) +
/* IFLA_IPTUN_FWMARK */
nla_total_size(4) +
0;
}
-@@ -2096,6 +2331,9 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2100,6 +2335,9 @@ static int ip6_tnl_fill_info(struct sk_b
{
struct ip6_tnl *tunnel = netdev_priv(dev);
struct __ip6_tnl_parm *parm = &tunnel->parms;
if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2105,9 +2343,27 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2109,9 +2347,27 @@ static int ip6_tnl_fill_info(struct sk_b
nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2147,6 +2403,7 @@ static const struct nla_policy ip6_tnl_p
+@@ -2151,6 +2407,7 @@ static const struct nla_policy ip6_tnl_p
[IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG },
[IFLA_IPTUN_FWMARK] = { .type = NLA_U32 },
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
-@@ -107,6 +107,8 @@ struct amd_chipset_type {
+@@ -124,6 +124,8 @@ struct amd_chipset_type {
u8 rev;
};
static struct amd_chipset_info {
struct pci_dev *nb_dev;
struct pci_dev *smbus_dev;
-@@ -511,6 +513,10 @@ void usb_amd_dev_put(void)
+@@ -528,6 +530,10 @@ void usb_amd_dev_put(void)
}
EXPORT_SYMBOL_GPL(usb_amd_dev_put);
+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
+
/*
- * Make sure the controller is completely inactive, unable to
- * generate interrupts or do DMA.
-@@ -590,8 +596,17 @@ reset_needed:
+ * Check if port is disabled in BIOS on AMD Promontory host.
+ * BIOS Disabled ports may wake on connect/disconnect and need
+@@ -699,8 +705,17 @@ reset_needed:
uhci_reset_hc(pdev, base);
return 1;
}
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
u16 cmd;
-@@ -1178,3 +1193,4 @@ bool usb_xhci_needs_pci_reset(struct pci
+@@ -1287,3 +1302,4 @@ bool usb_xhci_needs_pci_reset(struct pci
return false;
}
EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset);
int usb_amd_find_chipset_info(void);
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
-@@ -19,12 +22,29 @@ void sb800_prefetch(struct device *dev,
- bool usb_xhci_needs_pci_reset(struct pci_dev *pdev);
+@@ -20,12 +23,29 @@ bool usb_xhci_needs_pci_reset(struct pci
+ bool usb_amd_pt_check_port(struct device *device, int port);
#else
struct pci_dev;
+static inline int usb_amd_find_chipset_info(void)
+{
+ return false;
+}
- #endif /* CONFIG_USB_PCI */
-
- #endif /* __LINUX_USB_PCI_QUIRKS_H */
+ static inline bool usb_amd_pt_check_port(struct device *device, int port)
+ {
+ return false;
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -465,7 +465,14 @@ extern int usb_hcd_pci_probe(struct pci_
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
-@@ -5114,6 +5127,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -5120,6 +5133,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (tag < 0)
return NULL;
}
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
-@@ -6015,6 +6031,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -6021,6 +6037,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
ata_sff_port_init(ap);
return ap;
-@@ -6036,6 +6055,12 @@ static void ata_host_release(struct devi
+@@ -6042,6 +6061,12 @@ static void ata_host_release(struct devi
kfree(ap->pmp_link);
kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
-@@ -6482,7 +6507,23 @@ int ata_host_register(struct ata_host *h
+@@ -6488,7 +6513,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}
struct list_head node;
};
-@@ -539,7 +544,7 @@ static void bam_free_chan(struct dma_cha
+@@ -540,7 +545,7 @@ static void bam_free_chan(struct dma_cha
vchan_free_chan_resources(to_virt_chan(chan));
dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
goto err;
}
-@@ -632,8 +637,6 @@ static struct dma_async_tx_descriptor *b
+@@ -633,8 +638,6 @@ static struct dma_async_tx_descriptor *b
if (flags & DMA_PREP_INTERRUPT)
async_desc->flags |= DESC_FLAG_EOT;
async_desc->num_desc = num_alloc;
async_desc->curr_desc = async_desc->desc;
-@@ -684,14 +687,16 @@ err_out:
+@@ -685,14 +688,16 @@ err_out:
static int bam_dma_terminate_all(struct dma_chan *chan)
{
struct bam_chan *bchan = to_bam_chan(chan);
}
vchan_get_all_descriptors(&bchan->vc, &head);
-@@ -763,9 +768,9 @@ static int bam_resume(struct dma_chan *c
+@@ -764,9 +769,9 @@ static int bam_resume(struct dma_chan *c
*/
static u32 process_channel_irqs(struct bam_device *bdev)
{
srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE));
-@@ -785,27 +790,40 @@ static u32 process_channel_irqs(struct b
+@@ -786,27 +791,40 @@ static u32 process_channel_irqs(struct b
writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR));
spin_lock_irqsave(&bchan->vc.lock, flags);
}
spin_unlock_irqrestore(&bchan->vc.lock, flags);
-@@ -867,6 +885,7 @@ static enum dma_status bam_tx_status(str
+@@ -868,6 +886,7 @@ static enum dma_status bam_tx_status(str
struct dma_tx_state *txstate)
{
struct bam_chan *bchan = to_bam_chan(chan);
struct virt_dma_desc *vd;
int ret;
size_t residue = 0;
-@@ -882,11 +901,17 @@ static enum dma_status bam_tx_status(str
+@@ -883,11 +902,17 @@ static enum dma_status bam_tx_status(str
spin_lock_irqsave(&bchan->vc.lock, flags);
vd = vchan_find_desc(&bchan->vc, cookie);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
-@@ -927,63 +952,86 @@ static void bam_start_dma(struct bam_cha
+@@ -928,63 +953,86 @@ static void bam_start_dma(struct bam_cha
{
struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc);
struct bam_device *bdev = bchan->bdev;
/* ensure descriptor writes and dma start not reordered */
wmb();
-@@ -1012,7 +1060,7 @@ static void dma_tasklet(unsigned long da
+@@ -1013,7 +1061,7 @@ static void dma_tasklet(unsigned long da
bchan = &bdev->channels[i];
spin_lock_irqsave(&bchan->vc.lock, flags);
bam_start_dma(bchan);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
}
-@@ -1033,7 +1081,7 @@ static void bam_issue_pending(struct dma
+@@ -1034,7 +1082,7 @@ static void bam_issue_pending(struct dma
spin_lock_irqsave(&bchan->vc.lock, flags);
/* if work pending and idle, start a transaction */
bam_start_dma(bchan);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
-@@ -1133,6 +1181,7 @@ static void bam_channel_init(struct bam_
+@@ -1138,6 +1186,7 @@ static void bam_channel_init(struct bam_
vchan_init(&bchan->vc, &bdev->common);
bchan->vc.desc_free = bam_dma_free_desc;
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <0 170 0>;
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- clock-names = "core", "iface";
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
- qcom,ee = <0>;
- };
-
+ qcom,ee = <0>;
+ };
+
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-
+
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
-
+
Example:
-
+
@@ -55,7 +51,7 @@ Example:
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
- dma-names = "rx", "tx";
- };
+ dma-names = "rx", "tx";
+ };
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -27,3 +27,13 @@ config QCOM_HIDMA
- (user to kernel, kernel to kernel, etc.). It only supports
- memcpy interface. The core is not intended for general
- purpose slave DMA.
+ (user to kernel, kernel to kernel, etc.). It only supports
+ memcpy interface. The core is not intended for general
+ purpose slave DMA.
+
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
- .parent_names = gcc_pxo_pll8,
- .num_parents = 2,
- .ops = &clk_rcg_ops,
+ .parent_names = gcc_pxo_pll8,
+ .num_parents = 2,
+ .ops = &clk_rcg_ops,
- .flags = CLK_SET_PARENT_GATE,
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
- },
- },
+ },
+ },
};
@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
- },
- .num_parents = 1,
- .ops = &clk_branch_ops,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- },
- },
+ },
+ },
};
@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
- .hw.init = &(struct clk_init_data){
- .name = "gsbi1_h_clk",
- .ops = &clk_branch_ops,
+ .hw.init = &(struct clk_init_data){
+ .name = "gsbi1_h_clk",
+ .ops = &clk_branch_ops,
+ .flags = CLK_IGNORE_UNUSED,
- },
- },
+ },
+ },
};
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
+config MTD_QCOM_SMEM_PARTS
+ tristate "QCOM SMEM partitioning support"
+ depends on QCOM_SMEM
+ such as IPQ806x.
+
comment "User Modules And Translation Layers"
-
+
#
--- /dev/null
+++ b/drivers/mtd/qcom_smem_part.c
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
obj-y += parsers/
-
+
# 'Users' - code which presents functionality to userspace.
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
-@@ -56,3 +56,15 @@
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC
+ select GENERIC_PHY
+ help
+ Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
+config PHY_QCOM_DWC3
+ tristate "QCOM DWC3 USB PHY support"
+
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
-@@ -8,3 +8,4 @@
+@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
- select ARM_AMBA
- select PINCTRL
- select QCOM_SCM if SMP
+ select ARM_AMBA
+ select PINCTRL
+ select QCOM_SCM if SMP
+ select PCI_DOMAINS if PCI
- help
- Support for Qualcomm's devicetree based systems.
+ help
+ Support for Qualcomm's devicetree based systems.
+
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -7,6 +7,9 @@ config DMABOUNCE
- bool
- select ZONE_DMA
-
+ bool
+ select ZONE_DMA
+
+config KRAIT_L2_ACCESSORS
+ bool
+
config SHARP_LOCOMO
- bool
-
+ bool
+
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -7,6 +7,7 @@ obj-y += firmware.o
-
+
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
@@ -26,35 +26,24 @@
* parent - parent is adjustable through clk_set_parent
*/
-
+
-static u8 clk_mux_get_parent(struct clk_hw *hw)
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+ unsigned int *table, unsigned long flags)
{
- struct clk_mux *mux = to_clk_mux(hw);
- int num_parents = clk_hw_get_num_parents(hw);
+ int num_parents = clk_hw_get_num_parents(hw);
- u32 val;
-
- /*
- */
- val = clk_readl(mux->reg) >> mux->shift;
- val &= mux->mask;
-
+
- if (mux->table) {
+ if (table) {
- int i;
-
- for (i = 0; i < num_parents; i++)
+ int i;
+
+ for (i = 0; i < num_parents; i++)
- if (mux->table[i] == val)
+ if (table[i] == val)
- return i;
- return -EINVAL;
- }
-
+ return i;
+ return -EINVAL;
+ }
+
- if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+ if (val && (flags & CLK_MUX_INDEX_BIT))
- val = ffs(val) - 1;
-
+ val = ffs(val) - 1;
+
- if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+ if (val && (flags & CLK_MUX_INDEX_ONE))
- val--;
-
- if (val >= num_parents)
+ val--;
+
+ if (val >= num_parents)
@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_
-
- return val;
+
+ return val;
}
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
-
+
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
{
- struct clk_mux *mux = to_clk_mux(hw);
- u32 val;
+ struct clk_mux *mux = to_clk_mux(hw);
+ u32 val;
- unsigned long flags = 0;
-
+
- if (mux->table) {
- index = mux->table[index];
+ /*
+
+ if (table) {
+ val = table[val];
- } else {
+ } else {
- if (mux->flags & CLK_MUX_INDEX_BIT)
- index = 1 << index;
+ if (flags & CLK_MUX_INDEX_BIT)
+ val = 1 << index;
-
+
- if (mux->flags & CLK_MUX_INDEX_ONE)
- index++;
+ if (flags & CLK_MUX_INDEX_ONE)
+ val++;
- }
-
+ }
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
+
+ index = clk_mux_reindex(index, mux->table, mux->flags);
+
- if (mux->lock)
- spin_lock_irqsave(mux->lock, flags);
- else
+ if (mux->lock)
+ spin_lock_irqsave(mux->lock, flags);
+ else
@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk
}
-
+
const struct clk_ops clk_mux_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
- .set_parent = clk_mux_set_parent,
- .determine_rate = __clk_mux_determine_rate,
+ .set_parent = clk_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
-
+
const struct clk_ops clk_mux_ro_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
};
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
-
+
@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
- void __iomem *reg, u8 shift, u32 mask,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table, spinlock_t *lock)
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
{
- struct clk_mux *mux;
- struct clk_hw *hw;
+ struct clk_mux *mux;
+ struct clk_hw *hw;
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl
struct clk_mux {
- struct clk_hw hw;
- void __iomem *reg;
+ struct clk_hw hw;
+ void __iomem *reg;
- u32 *table;
+ unsigned int *table;
- u32 mask;
- u8 shift;
- u8 flags;
+ u32 mask;
+ u8 shift;
+ u8 flags;
@@ -486,6 +486,11 @@ struct clk_mux {
extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
-
+
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+ unsigned int *table, unsigned long flags);
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+ unsigned long flags);
+
struct clk *clk_register_mux(struct device *dev, const char *name,
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
- void __iomem *reg, u8 shift, u32 mask,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
-
+
void clk_unregister_mux(struct clk *clk);
void clk_hw_unregister_mux(struct clk_hw *hw);
+clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
-
+
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -0,0 +1,253 @@
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -196,3 +196,11 @@ config MSM_MMCC_8996
- Support for the multimedia clock controller on msm8996 devices.
- Say Y if you want to support multimedia devices such as display,
- graphics, video encode/decode, camera, etc.
+ Support for the multimedia clock controller on msm8996 devices.
+ Say Y if you want to support multimedia devices such as display,
+ graphics, video encode/decode, camera, etc.
+
+config QCOM_HFPLL
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
-
+
static struct clk_pll pll0 = {
@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = {
- },
+ },
};
-
+
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
+};
+
static struct clk_pll pll14 = {
- .l_reg = 0x31c4,
- .m_reg = 0x31c8,
+ .l_reg = 0x31c4,
+ .m_reg = 0x31c8,
@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl
- [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
- [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
- [NSSTCM_CLK] = &nss_tcm_clk.clkr,
+ [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ [NSSTCM_CLK] = &nss_tcm_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
-
+
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -204,3 +204,7 @@ config QCOM_HFPLL
- Support for the high-frequency PLLs present on Qualcomm devices.
- Say Y if you want to support CPU frequency scaling on devices
- such as MSM8974, APQ8084, etc.
+ Support for the high-frequency PLLs present on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
+
+config KRAIT_CLOCKS
+ bool
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
@@ -21,10 +21,17 @@ PROPERTIES
- the register region. An optional second element specifies
- the base address and size of the alias register region.
-
+ the register region. An optional second element specifies
+ the base address and size of the alias register region.
+
+- clock-output-names:
+ Usage: optional
+ Value type: <string>
+ CPU number starting at 0.
+
Example:
-
- clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v2";
- reg = <0x02088000 0x1000>,
- <0x02008000 0x1000>;
+
+ clock-controller@2088000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x02088000 0x1000>,
+ <0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
- };
+ };
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
@@ -0,0 +1,28 @@
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -205,6 +205,14 @@ config QCOM_HFPLL
- Say Y if you want to support CPU frequency scaling on devices
- such as MSM8974, APQ8084, etc.
-
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
+
+config KPSS_XCC
+ tristate "KPSS Clock Controller"
+ depends on COMMON_CLK_QCOM
+ as MSM8960, APQ8064, etc.
+
config KRAIT_CLOCKS
- bool
- select KRAIT_L2_ACCESSORS
+ bool
+ select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -213,6 +213,14 @@ config KPSS_XCC
- if you want to support CPU frequency scaling on devices such
- as MSM8960, APQ8064, etc.
-
+ if you want to support CPU frequency scaling on devices such
+ as MSM8960, APQ8064, etc.
+
+config KRAITCC
+ tristate "Krait Clock Controller"
+ depends on COMMON_CLK_QCOM && ARM
+ Say Y if you want to support CPU frequency scaling.
+
config KRAIT_CLOCKS
- bool
- select KRAIT_L2_ACCESSORS
+ bool
+ select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
- if (__clk_is_enabled(hw->clk))
- __krait_mux_set_sel(mux, sel);
-
+ if (__clk_is_enabled(hw->clk))
+ __krait_mux_set_sel(mux, sel);
+
+ mux->reparent = true;
+
- return 0;
+ return 0;
}
-
+
--- a/drivers/clk/qcom/clk-krait.h
+++ b/drivers/clk/qcom/clk-krait.h
@@ -23,6 +23,9 @@ struct krait_mux_clk {
- u32 shift;
- u32 en_mask;
- bool lpl;
+ u32 shift;
+ u32 en_mask;
+ bool lpl;
+ u8 safe_sel;
+ u8 old_index;
+ bool reparent;
-
- struct clk_hw hw;
- struct notifier_block clk_nb;
+
+ struct clk_hw hw;
+ struct notifier_block clk_nb;
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
- 0,
+ 0,
};
-
+
+/*
+ * Notifier function for switching the muxes to safe parent
+ * while the hfpll is getting reprogrammed.
{
@@ -79,6 +122,7 @@ static int
krait_add_sec_mux(struct device *dev, int id, const char *s,
- unsigned int offset, bool unique_aux)
+ unsigned int offset, bool unique_aux)
{
+ int ret;
- struct krait_mux_clk *mux;
- static const char *sec_mux_list[] = {
- "acpu_aux",
+ struct krait_mux_clk *mux;
+ static const char *sec_mux_list[] = {
+ "acpu_aux",
@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
- mux->shift = 2;
- mux->parent_map = sec_mux_map;
- mux->hw.init = &init;
+ mux->shift = 2;
+ mux->parent_map = sec_mux_map;
+ mux->hw.init = &init;
+ mux->safe_sel = 0;
-
- init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
- if (!init.name)
+
+ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+ if (!init.name)
@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
-
- clk = devm_clk_register(dev, &mux->hw);
-
+
+ clk = devm_clk_register(dev, &mux->hw);
+
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto unique_aux;
+
+unique_aux:
- if (unique_aux)
- kfree(sec_mux_list[0]);
+ if (unique_aux)
+ kfree(sec_mux_list[0]);
err_aux:
@@ -128,6 +178,7 @@ static struct clk *
krait_add_pri_mux(struct device *dev, int id, const char *s,
- unsigned int offset)
+ unsigned int offset)
{
+ int ret;
- struct krait_mux_clk *mux;
- const char *p_names[3];
- struct clk_init_data init = {
+ struct krait_mux_clk *mux;
+ const char *p_names[3];
+ struct clk_init_data init = {
@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
- mux->lpl = id >= 0;
- mux->parent_map = pri_mux_map;
- mux->hw.init = &init;
+ mux->lpl = id >= 0;
+ mux->parent_map = pri_mux_map;
+ mux->hw.init = &init;
+ mux->safe_sel = 2;
-
- init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
- if (!init.name)
+
+ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
+ if (!init.name)
@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
-
- clk = devm_clk_register(dev, &mux->hw);
-
+
+ clk = devm_clk_register(dev, &mux->hw);
+
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto err_p3;
+err_p3:
- kfree(p_names[2]);
+ kfree(p_names[2]);
err_p2:
- kfree(p_names[1]);
+ kfree(p_names[1]);
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
- depends on ARCH_OMAP2PLUS
- default ARCH_OMAP2PLUS
-
+ depends on ARCH_OMAP2PLUS
+ default ARCH_OMAP2PLUS
+
+config ARM_QCOM_CPUFREQ
+ tristate "Qualcomm based"
+ depends on ARCH_QCOM
+ If in doubt, say N.
+
config ARM_S3C_CPUFREQ
- bool
- help
+ bool
+ help
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt81
+@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += me
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -220,7 +220,10 @@ static int cpufreq_init(struct cpufreq_p
- }
-
- if (fallback) {
+ }
+
+ if (fallback) {
- cpumask_setall(policy->cpus);
+ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
+
+ if (!pd || !pd->independent_clocks)
+ cpumask_setall(policy->cpus);
-
- /*
- * OPP tables are initialized only for policy->cpu, do it for
+
+ /*
+ * OPP tables are initialized only for policy->cpu, do it for
@@ -372,6 +375,8 @@ static int dt_cpufreq_probe(struct platf
- if (data && data->have_governor_per_policy)
- dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
-
+ if (data && data->have_governor_per_policy)
+ dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+
+ dt_cpufreq_driver.driver_data = data;
+
- ret = cpufreq_register_driver(&dt_cpufreq_driver);
- if (ret)
- dev_err(&pdev->dev, "failed register driver: %d\n", ret);
+ ret = cpufreq_register_driver(&dt_cpufreq_driver);
+ if (ret)
+ dev_err(&pdev->dev, "failed register driver: %d\n", ret);
--- a/drivers/cpufreq/cpufreq-dt.h
+++ b/drivers/cpufreq/cpufreq-dt.h
@@ -13,6 +13,12 @@
#include <linux/types.h>
-
+
struct cpufreq_dt_platform_data {
+ /*
+ * True when each CPU has its own clock to control its
+ * clock.
+ */
+ bool independent_clocks;
- bool have_governor_per_policy;
+ bool have_governor_per_policy;
};
+
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st
- } else {
- ops.len = ops.ooblen = 1;
- }
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
- ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
+ ops.mode = MTD_OPS_RAW;
+ else
+ ops.mode = MTD_OPS_PLACE_OOB;
-
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
- ops.oobbuf = buf;
- ops.ooboffs = 0;
- ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
- ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
+ ops.mode = MTD_OPS_RAW;
+ else
+ ops.mode = MTD_OPS_PLACE_OOB;
-
- for (j = 0; j < numpages; j++) {
- /*
+
+ for (j = 0; j < numpages; j++) {
+ /*
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -116,6 +116,12 @@ struct nand_bbt_descr {
#define NAND_BBT_NO_OOB_BBM 0x00080000
-
+
/*
+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
-@@ -1277,11 +1277,13 @@
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
-
+@@ -1277,11 +1277,13 @@ struct opp_table *dev_pm_opp_set_regulat
+ if (!opp_table)
+ return ERR_PTR(-ENOMEM);
+
+#if 0
- /* This should be called before OPPs are initialized */
- if (WARN_ON(!list_empty(&opp_table->opp_list))) {
- ret = -EBUSY;
- goto err;
- }
+ /* This should be called before OPPs are initialized */
+ if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+ ret = -EBUSY;
+ goto err;
+ }
+#endif
-
- /* Already have regulators set */
- if (opp_table->regulators) {
+
+ /* Already have regulators set */
+ if (opp_table->regulators) {
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
-@@ -1605,6 +1605,83 @@ unlock:
+@@ -1605,6 +1605,83 @@ put_table:
}
-
+
/**
+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
+ * @dev: device for which we do this operation
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -25,6 +25,7 @@ struct opp_table;
-
+
enum dev_pm_opp_event {
- OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+ OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+ OPP_EVENT_ADJUST_VOLTAGE,
};
-
+
/**
@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u
- unsigned long u_volt);
+ unsigned long u_volt);
void dev_pm_opp_remove(struct device *dev, unsigned long freq);
-
+
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt);
+
int dev_pm_opp_enable(struct device *dev, unsigned long freq);
-
+
int dev_pm_opp_disable(struct device *dev, unsigned long freq);
@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str
{
}
-
+
+static inline int
+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt)
+
static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
{
- return 0;
+ return 0;
@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
-
+
+struct regulator *dev_pm_opp_get_regulator(struct device *dev)
+{
+ struct opp_table *opp_table;
* @opp: opp for which turbo mode is being verified
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
-@@ -85,6 +85,7 @@ enum dev_pm_opp_event {
+@@ -85,6 +85,7 @@ void dev_pm_opp_put_opp_table(struct opp
unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
-
+
unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
+struct regulator *dev_pm_opp_get_regulator(struct device *dev);
-
+
bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
+
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev
- struct opp_table *opp_table;
- struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
- int r = 0;
+ struct opp_table *opp_table;
+ struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
+ int r = 0;
+ unsigned long tol;
-
- /* keep the node allocated */
- new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
+
+ /* keep the node allocated */
+ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
@@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev
-
- /* plug in new node */
- new_opp->supplies[0].u_volt = u_volt;
+
+ /* plug in new node */
+ new_opp->supplies[0].u_volt = u_volt;
+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
+ new_opp->supplies[0].u_volt = u_volt;
+ new_opp->supplies[0].u_volt_min = u_volt - tol;
+ new_opp->supplies[0].u_volt_max = u_volt + tol;
-
- list_replace(&opp->node, &new_opp->node);
- mutex_unlock(&opp_table_lock);
+
+ list_replace(&opp->node, &new_opp->node);
+ mutex_unlock(&opp_table_lock);
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their
- "qcom,rpm-pm8901-regulators"
- "qcom,rpm-pm8921-regulators"
- "qcom,rpm-pm8018-regulators"
+ "qcom,rpm-pm8901-regulators"
+ "qcom,rpm-pm8921-regulators"
+ "qcom,rpm-pm8018-regulators"
+ "qcom,rpm-smb208-regulators"
-
+
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
- s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
- l12, l14, lvs1
-
+ s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, lvs1
+
+smb208:
+ s1a, s1b, s2a, s2b
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
-
+
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
- { }
+ { }
};
-
+
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
+};
+
static const struct of_device_id rpm_of_match[] = {
- { .compatible = "qcom,rpm-pm8018-regulators",
- .data = &rpm_pm8018_regulators },
- { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
- { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
- { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-pm8018-regulators",
+ .data = &rpm_pm8018_regulators },
+ { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
+ { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
+ { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
- { }
+ { }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -32,6 +32,9 @@ struct private_data {
- struct device *cpu_dev;
- struct thermal_cooling_device *cdev;
- const char *reg_name;
+ struct device *cpu_dev;
+ struct thermal_cooling_device *cdev;
+ const char *reg_name;
+ struct notifier_block opp_nb;
+ struct mutex lock;
+ unsigned long opp_freq;
};
-
+
static struct freq_attr *cpufreq_dt_attr[] = {
@@ -43,9 +46,16 @@ static struct freq_attr *cpufreq_dt_attr
static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct private_data *priv = policy->driver_data;
+ struct private_data *priv = policy->driver_data;
+ int ret;
+ unsigned long target_freq = policy->freq_table[index].frequency * 1000;
+
+ if (!ret)
+ priv->opp_freq = target_freq;
+ mutex_unlock(&priv->lock);
-
+
- return dev_pm_opp_set_rate(priv->cpu_dev,
- policy->freq_table[index].frequency * 1000);
+ return ret;
}
-
+
/*
@@ -86,6 +96,39 @@ node_put:
- return name;
+ return name;
}
-
+
+static int opp_notifier(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+
static int resources_available(void)
{
- struct device *cpu_dev;
+ struct device *cpu_dev;
@@ -152,6 +195,7 @@ static int cpufreq_init(struct cpufreq_p
- bool fallback = false;
- const char *name;
- int ret;
+ bool fallback = false;
+ const char *name;
+ int ret;
+ struct srcu_notifier_head *opp_srcu_head;
-
- cpu_dev = get_cpu_device(policy->cpu);
- if (!cpu_dev) {
+
+ cpu_dev = get_cpu_device(policy->cpu);
+ if (!cpu_dev) {
@@ -241,13 +285,16 @@ static int cpufreq_init(struct cpufreq_p
- goto out_free_opp;
- }
-
+ goto out_free_opp;
+ }
+
+ mutex_init(&priv->lock);
+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
+
- priv->reg_name = name;
- priv->opp_table = opp_table;
-
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
- if (ret) {
- dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+ priv->reg_name = name;
+ priv->opp_table = opp_table;
+
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
- goto out_free_priv;
+ goto out_unregister_nb;
- }
-
- priv->cpu_dev = cpu_dev;
-@@ -283,6 +343,8 @@ static int cpufreq_init(struct cpufreq_p
-
+ }
+
+ priv->cpu_dev = cpu_dev;
+@@ -283,6 +330,8 @@ static int cpufreq_init(struct cpufreq_p
+
out_free_cpufreq_table:
- dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_unregister_nb:
+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
out_free_priv:
- kfree(priv);
+ kfree(priv);
out_free_opp:
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -48,11 +48,41 @@ static int set_target(struct cpufreq_pol
- struct private_data *priv = policy->driver_data;
- int ret;
- unsigned long target_freq = policy->freq_table[index].frequency * 1000;
+ struct private_data *priv = policy->driver_data;
+ int ret;
+ unsigned long target_freq = policy->freq_table[index].frequency * 1000;
+ struct clk *l2_clk = policy->l2_clk;
+ unsigned int l2_freq;
+ unsigned long new_l2_freq = 0;
-
- mutex_lock(&priv->lock);
- ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
+
+ mutex_lock(&priv->lock);
+ ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
- if (!ret)
+
+ if (!ret) {
+ }
+ }
+
- priv->opp_freq = target_freq;
+ priv->opp_freq = target_freq;
+ }
+
- mutex_unlock(&priv->lock);
-
- return ret;
+ mutex_unlock(&priv->lock);
+
+ return ret;
@@ -196,6 +226,8 @@ static int cpufreq_init(struct cpufreq_p
- const char *name;
- int ret;
- struct srcu_notifier_head *opp_srcu_head;
+ const char *name;
+ int ret;
+ struct srcu_notifier_head *opp_srcu_head;
+ struct device_node *l2_np;
+ struct clk *l2_clk = NULL;
-
- cpu_dev = get_cpu_device(policy->cpu);
- if (!cpu_dev) {
+
+ cpu_dev = get_cpu_device(policy->cpu);
+ if (!cpu_dev) {
@@ -303,6 +335,13 @@ static int cpufreq_init(struct cpufreq_p
-
- policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
-
+
+ policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
+
+ l2_clk = clk_get(cpu_dev, "l2");
+ if (!IS_ERR(l2_clk))
+ policy->l2_clk = l2_clk;
+ if (l2_np)
+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
+
- ret = cpufreq_table_validate_and_show(policy, freq_table);
- if (ret) {
- dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+ ret = cpufreq_table_validate_and_show(policy, freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -73,6 +73,8 @@ struct cpufreq_policy {
- unsigned int cpu; /* cpu managing this policy, must be online */
-
- struct clk *clk;
+ unsigned int cpu; /* cpu managing this policy, must be online */
+
+ struct clk *clk;
+ struct clk *l2_clk; /* L2 clock */
+ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */
- struct cpufreq_cpuinfo cpuinfo;/* see above */
-
- unsigned int min; /* in kHz */
+ struct cpufreq_cpuinfo cpuinfo;/* see above */
+
+ unsigned int min; /* in kHz */
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -143,8 +143,10 @@ static int opp_notifier(struct notifier_
- ret = PTR_ERR(cpu_reg);
- goto out;
- }
+ ret = PTR_ERR(cpu_reg);
+ goto out;
+ }
+ rcu_read_lock();
- volt = dev_pm_opp_get_voltage(opp);
- freq = dev_pm_opp_get_freq(opp);
+ volt = dev_pm_opp_get_voltage(opp);
+ freq = dev_pm_opp_get_freq(opp);
+ rcu_read_unlock();
-
- mutex_lock(&priv->lock);
- if (freq == priv->opp_freq) {
+
+ mutex_lock(&priv->lock);
+ if (freq == priv->opp_freq) {
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE
- depends on ARCH_MVEBU && !ARM64
- help
- Select this to enable cpuidle on Armada 370, 38x and XP processors.
+ depends on ARCH_MVEBU && !ARM64
+ help
+ Select this to enable cpuidle on Armada 370, 38x and XP processors.
+
+config ARM_QCOM_CPUIDLE
+ bool "CPU Idle Driver for QCOM processors"
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -341,7 +341,7 @@
- depends on MMU
- select ARM_HAS_SG_CHAIN
- select ARM_PATCH_PHYS_VIRT
+@@ -341,7 +341,7 @@ config ARCH_MULTIPLATFORM
+ depends on MMU
+ select ARM_HAS_SG_CHAIN
+ select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ARCH_QCOM
- select TIMER_OF
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
+ select TIMER_OF
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -255,9 +255,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
MACHINE :=
endif
+endif
-
+
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
--- /dev/null
--- a/drivers/mtd/qcom_smem_part.c
+++ b/drivers/mtd/qcom_smem_part.c
@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
- m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
- m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
-
+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+
+ /* "rootfs" conflicts with OpenWrt auto mounting */
+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
+ m_part->name = "ubi";
+
- /*
- * The last SMEM partition may have its size marked as
- * something like 0xffffffff, which means "until the end of the
+ /*
+ * The last SMEM partition may have its size marked as
+ * something like 0xffffffff, which means "until the end of the
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = {
- .parent_map = gcc_pxo_pll8_map,
- },
- .clkr = {
+ .parent_map = gcc_pxo_pll8_map,
+ },
+ .clkr = {
+ .enable_reg = 0x2e80,
+ .enable_mask = BIT(11),
- .hw.init = &(struct clk_init_data){
- .name = "prng_src",
- .parent_names = gcc_pxo_pll8,
+ .hw.init = &(struct clk_init_data){
+ .name = "prng_src",
+ .parent_names = gcc_pxo_pll8,
- "qcom,msm8974-tsens" : For 8974 Family of SoCs
- "qcom,msm8996-tsens" : For 8996 Family of SoCs
+ - "qcom,ipq8064-tsens" : For IPQ8064
-
+
- reg: Address range of the thermal registers
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
--- a/drivers/thermal/qcom/Makefile
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
- }, {
- .compatible = "qcom,msm8996-tsens",
- .data = &data_8996,
+ }, {
+ .compatible = "qcom,msm8996-tsens",
+ .data = &data_8996,
+ }, {
+ .compatible = "qcom,ipq8064-tsens",
+ .data = &data_ipq8064,
- },
- {}
+ },
+ {}
};
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, int *);
-
+
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
-
+
#endif /* __QCOM_TSENS_H__ */
@@ -12,11 +12,15 @@ Required properties:
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
nvmem cells
-
+
+Optional properties:
+- interrupts: Interrupt which gets triggered when threshold is hit
+
Example:
tsens: thermal-sensor@900000 {
- compatible = "qcom,msm8916-tsens";
- reg = <0x4a8000 0x2000>;
- nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
- nvmem-cell-names = "caldata", "calsel";
+ compatible = "qcom,msm8916-tsens";
+ reg = <0x4a8000 0x2000>;
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "caldata", "calsel";
+ interrupts = <0 178 0>;
- #thermal-sensor-cells = <1>;
- };
+ #thermal-sensor-cells = <1>;
+ };
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (!data->ops->get_temp)
+ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EINVAL;
-
- return data->ops->get_temp(data->sensor_data, temp);
+ return -EINVAL;
+
+ return data->ops->get_temp(data->sensor_data, temp);
@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (!data->ops || !data->ops->set_trips)
+ if (!data->ops || !data->ops->set_trips
+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EINVAL;
-
- return data->ops->set_trips(data->sensor_data, low, high);
+ return -EINVAL;
+
+ return data->ops->set_trips(data->sensor_data, low, high);
@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
+ if (data->mode == THERMAL_DEVICE_DISABLED)
+ return -EINVAL;
+
- return data->ops->set_emul_temp(data->sensor_data, temp);
+ return data->ops->set_emul_temp(data->sensor_data, temp);
}
-
+
@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (!data->ops->get_trend)
+ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EINVAL;
-
- return data->ops->get_trend(data->sensor_data, trip, trend);
+ return -EINVAL;
+
+ return data->ops->get_trend(data->sensor_data, trip, trend);
@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th
- mutex_unlock(&tz->lock);
-
- data->mode = mode;
+ mutex_unlock(&tz->lock);
+
+ data->mode = mode;
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+ if (mode == THERMAL_DEVICE_ENABLED)
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
- return 0;
+
+ return 0;
}
@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- *type = data->trips[trip].type;
+ return -EDOM;
+
+ *type = data->trips[trip].type;
@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru
- return 0;
+ return 0;
}
-
+
+static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
+ int trip, enum thermal_trip_activation_mode mode)
+{
+}
+
static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
- int *temp)
+ int *temp)
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- *temp = data->trips[trip].temperature;
+ return -EDOM;
+
+ *temp = data->trips[trip].temperature;
@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- if (data->ops->set_trip_temp) {
+ return -EDOM;
+
+ if (data->ops->set_trip_temp) {
@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- *hyst = data->trips[trip].hysteresis;
+ return -EDOM;
+
+ *hyst = data->trips[trip].hysteresis;
@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru
{
- struct __thermal_zone *data = tz->devdata;
-
+ struct __thermal_zone *data = tz->devdata;
+
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- /* thermal framework should take care of data->mask & (1 << trip) */
+ return -EDOM;
+
+ /* thermal framework should take care of data->mask & (1 << trip) */
@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device
- if (ops->set_emul_temp)
- tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
-
+ if (ops->set_emul_temp)
+ tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+
+ if (ops->set_trip_activate)
+ tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
+
- mutex_unlock(&tzd->lock);
-
- return tzd;
+ mutex_unlock(&tzd->lock);
+
+ return tzd;
@@ -726,7 +766,10 @@ static const char * const trip_types[] =
- [THERMAL_TRIP_ACTIVE] = "active",
- [THERMAL_TRIP_PASSIVE] = "passive",
- [THERMAL_TRIP_HOT] = "hot",
+ [THERMAL_TRIP_ACTIVE] = "active",
+ [THERMAL_TRIP_PASSIVE] = "passive",
+ [THERMAL_TRIP_HOT] = "hot",
- [THERMAL_TRIP_CRITICAL] = "critical",
+ [THERMAL_TRIP_CRITICAL] = "critical_high",
+ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
+ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
+ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
};
-
+
/**
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
-
+
static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
{
- const struct tsens_sensor *s = p;
+ struct tsens_sensor *s = p;
- struct tsens_device *tmdev = s->tmdev;
-
- if (tmdev->ops->get_trend)
+ struct tsens_device *tmdev = s->tmdev;
+
+ if (tmdev->ops->get_trend)
@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
- return -ENOTSUPP;
+ return -ENOTSUPP;
}
-
+
-static int __maybe_unused tsens_suspend(struct device *dev)
+static int __maybe_unused tsens_suspend(void *data)
{
- struct tsens_device *tmdev = dev_get_drvdata(dev);
+ struct tsens_sensor *s = data;
+ struct tsens_device *tmdev = s->tmdev;
-
- if (tmdev->ops && tmdev->ops->suspend)
- return tmdev->ops->suspend(tmdev);
+
+ if (tmdev->ops && tmdev->ops->suspend)
+ return tmdev->ops->suspend(tmdev);
@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend
- return 0;
+ return 0;
}
-
+
-static int __maybe_unused tsens_resume(struct device *dev)
+static int __maybe_unused tsens_resume(void *data)
{
- struct tsens_device *tmdev = dev_get_drvdata(dev);
+ struct tsens_sensor *s = data;
+ struct tsens_device *tmdev = s->tmdev;
-
- if (tmdev->ops && tmdev->ops->resume)
- return tmdev->ops->resume(tmdev);
+
+ if (tmdev->ops && tmdev->ops->resume)
+ return tmdev->ops->resume(tmdev);
@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
- return 0;
+ return 0;
}
-
+
+static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
+{
+ struct tsens_sensor *s = data;
+
+
static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
-
+
static const struct of_device_id tsens_table[] = {
@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
static const struct thermal_zone_of_device_ops tsens_of_ops = {
- .get_temp = tsens_get_temp,
- .get_trend = tsens_get_trend,
+ .get_temp = tsens_get_temp,
+ .get_trend = tsens_get_trend,
+ .set_trip_temp = tsens_set_trip_temp,
+ .set_trip_activate = tsens_activate_trip_type,
};
-
+
static int tsens_register(struct tsens_device *tmdev)
@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
- if (id)
- data = id->data;
- else
+ if (id)
+ data = id->data;
+ else
- data = &data_8960;
+ return -EINVAL;
-
- if (data->num_sensors <= 0) {
- dev_err(dev, "invalid number of sensors\n");
+
+ if (data->num_sensors <= 0) {
+ dev_err(dev, "invalid number of sensors\n");
@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
- tmdev->dev = dev;
- tmdev->num_sensors = data->num_sensors;
- tmdev->ops = data->ops;
+ tmdev->dev = dev;
+ tmdev->num_sensors = data->num_sensors;
+ tmdev->ops = data->ops;
+
+ tmdev->tsens_irq = platform_get_irq(pdev, 0);
+
- for (i = 0; i < tmdev->num_sensors; i++) {
- if (data->hw_ids)
- tmdev->sensor[i].hw_id = data->hw_ids[i];
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ if (data->hw_ids)
+ tmdev->sensor[i].hw_id = data->hw_ids[i];
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -24,9 +24,12 @@ struct tsens_device;
struct tsens_sensor {
- struct tsens_device *tmdev;
- struct thermal_zone_device *tzd;
+ struct tsens_device *tmdev;
+ struct thermal_zone_device *tzd;
+ struct work_struct notify_work;
- int offset;
- int id;
- int hw_id;
+ int offset;
+ int id;
+ int hw_id;
+ int calib_data;
+ int calib_data_backup;
- int slope;
- u32 status;
+ int slope;
+ u32 status;
};
@@ -41,6 +44,9 @@ struct tsens_sensor {
* @suspend: Function to suspend the tsens device
+ * @set_trip_activate: Function to activate trip points
*/
struct tsens_ops {
- /* mandatory callbacks */
+ /* mandatory callbacks */
@@ -53,6 +59,9 @@ struct tsens_ops {
- int (*suspend)(struct tsens_device *);
- int (*resume)(struct tsens_device *);
- int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+ int (*suspend)(struct tsens_device *);
+ int (*resume)(struct tsens_device *);
+ int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+ int (*set_trip_temp)(void *, int, int);
+ int (*set_trip_activate)(void *, int,
+ enum thermal_trip_activation_mode);
};
-
+
/**
@@ -76,11 +85,13 @@ struct tsens_context {
struct tsens_device {
- struct device *dev;
- u32 num_sensors;
+ struct device *dev;
+ u32 num_sensors;
+ u32 tsens_irq;
- struct regmap *map;
- struct regmap_field *status_field;
- struct tsens_context ctx;
- bool trdy;
- const struct tsens_ops *ops;
+ struct regmap *map;
+ struct regmap_field *status_field;
+ struct tsens_context ctx;
+ bool trdy;
+ const struct tsens_ops *ops;
+ struct work_struct tsens_work;
- struct tsens_sensor sensor[0];
+ struct tsens_sensor sensor[0];
};
-
+
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
-@@ -115,12 +115,48 @@
- return sprintf(buf, "passive\n");
- case THERMAL_TRIP_ACTIVE:
- return sprintf(buf, "active\n");
+@@ -115,12 +115,48 @@ trip_point_type_show(struct device *dev,
+ return sprintf(buf, "passive\n");
+ case THERMAL_TRIP_ACTIVE:
+ return sprintf(buf, "active\n");
+ case THERMAL_TRIP_CONFIGURABLE_HI:
+ return sprintf(buf, "configurable_hi\n");
+ case THERMAL_TRIP_CONFIGURABLE_LOW:
+ return sprintf(buf, "configurable_low\n");
+ case THERMAL_TRIP_CRITICAL_LOW:
+ return sprintf(buf, "critical_low\n");
- default:
- return sprintf(buf, "unknown\n");
- }
+ default:
+ return sprintf(buf, "unknown\n");
+ }
}
-
+
static ssize_t
+trip_point_type_activate(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+
+static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+ const char *buf, size_t count)
{
-@@ -562,6 +598,12 @@
- tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
- attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
-
+@@ -562,6 +598,12 @@ static int create_trip_attrs(struct ther
+ tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+ attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
+
+ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
+ tz->trip_type_attrs[indx].attr.store
+ = trip_point_type_activate;
+ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
+ }
+
- /* create trip temp attribute */
- snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
- "trip_point_%d_temp", indx);
+ /* create trip temp attribute */
+ snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_temp", indx);
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -78,11 +78,19 @@ enum thermal_device_mode {
- THERMAL_DEVICE_ENABLED,
+ THERMAL_DEVICE_ENABLED,
};
-
+
+enum thermal_trip_activation_mode {
+ THERMAL_TRIP_ACTIVATION_DISABLED = 0,
+ THERMAL_TRIP_ACTIVATION_ENABLED,
+};
+
enum thermal_trip_type {
- THERMAL_TRIP_ACTIVE = 0,
- THERMAL_TRIP_PASSIVE,
- THERMAL_TRIP_HOT,
- THERMAL_TRIP_CRITICAL,
+ THERMAL_TRIP_ACTIVE = 0,
+ THERMAL_TRIP_PASSIVE,
+ THERMAL_TRIP_HOT,
+ THERMAL_TRIP_CRITICAL,
+ THERMAL_TRIP_CONFIGURABLE_HI,
+ THERMAL_TRIP_CONFIGURABLE_LOW,
+ THERMAL_TRIP_CRITICAL_LOW,
};
-
+
enum thermal_trend {
@@ -120,6 +128,8 @@ struct thermal_zone_device_ops {
- enum thermal_trip_type *);
- int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
- int (*set_trip_temp) (struct thermal_zone_device *, int, int);
+ enum thermal_trip_type *);
+ int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
+ int (*set_trip_temp) (struct thermal_zone_device *, int, int);
+ int (*set_trip_activate) (struct thermal_zone_device *, int,
+ enum thermal_trip_activation_mode);
- int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
- int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
- int (*get_crit_temp) (struct thermal_zone_device *, int *);
+ int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
+ int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
+ int (*get_crit_temp) (struct thermal_zone_device *, int *);
@@ -363,6 +373,8 @@ struct thermal_genl_event {
* temperature.
* @set_trip_temp: a pointer to a function that sets the trip temperature on
+ * temperature interrupts
*/
struct thermal_zone_of_device_ops {
- int (*get_temp)(void *, int *);
+ int (*get_temp)(void *, int *);
@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops {
- int (*set_trips)(void *, int, int);
- int (*set_emul_temp)(void *, int);
- int (*set_trip_temp)(void *, int, int);
+ int (*set_trips)(void *, int, int);
+ int (*set_emul_temp)(void *, int);
+ int (*set_trip_temp)(void *, int, int);
+ int (*set_trip_activate)(void *, int,
+ enum thermal_trip_activation_mode);
};
-
+
/**
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -13,6 +13,7 @@ Required properties :
- "qcom,rpmcc-msm8916", "qcom,rpmcc"
- "qcom,rpmcc-msm8974", "qcom,rpmcc"
- "qcom,rpmcc-apq8064", "qcom,rpmcc"
+ "qcom,rpmcc-msm8916", "qcom,rpmcc"
+ "qcom,rpmcc-msm8974", "qcom,rpmcc"
+ "qcom,rpmcc-apq8064", "qcom,rpmcc"
+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
-
+
- #clock-cells : shall contain 1
-
+
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
-
+
+/* ipq806x */
+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
+
static struct clk_rpm *apq8064_clks[] = {
- [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
- [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
+ [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
+ [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
- [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
+ [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
};
-
+
+static struct clk_rpm *ipq806x_clks[] = {
+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
+};
+
static const struct rpm_clk_desc rpm_clk_apq8064 = {
- .clks = apq8064_clks,
- .num_clks = ARRAY_SIZE(apq8064_clks),
+ .clks = apq8064_clks,
+ .num_clks = ARRAY_SIZE(apq8064_clks),
};
-
+
+static const struct rpm_clk_desc rpm_clk_ipq806x = {
+ .clks = ipq806x_clks,
+ .num_clks = ARRAY_SIZE(ipq806x_clks),
+};
+
static const struct of_device_id rpm_clk_match_table[] = {
- { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+ { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
- { }
+ { }
};
MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+#define RPM_NSS_FABRIC_0_A_CLK 23
+#define RPM_NSS_FABRIC_1_CLK 24
+#define RPM_NSS_FABRIC_1_A_CLK 25
-
+
/* SMD RPM clocks */
#define RPM_SMD_XO_CLK_SRC 0
#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
-
+
#include "gpiolib.h"
-
+
@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
+ gpiochip_remove_pin_ranges(chip);
+ of_node_put(chip->of_node);
}
+
+static struct of_device_id gpio_export_ids[] = {
-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
{
- struct gpio_chip *chip;
- struct gpio_device *gdev;
+ struct gpio_chip *chip;
+ struct gpio_device *gdev;
@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
+ if (name)
+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
+
+ dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ MKDEV(0, 0), data, gpio_groups,
@@ -636,6 +638,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
}
+EXPORT_SYMBOL_GPL(__gpiod_export);
+
+ return __gpiod_export(desc, direction_may_change, NULL);
+}
EXPORT_SYMBOL_GPL(gpiod_export);
-
+
static int match_export(struct device *dev, const void *desc)
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
-
+
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
+{
+}
+
static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
+ unsigned gpio)
{
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
-@@ -451,6 +451,7 @@ static inline struct gpio_desc *devm_get
-
+@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
+
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
+
+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
+ struct gpio_desc *desc);
@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
-
+
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
+
+static inline int _gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change,
+ const char *name)
+}
+
static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
+ bool direction_may_change)
{
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
+ The command-line arguments provided by the boot loader will be
+ appended to the the device tree bootargs property.
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ bool "Append rootblock parsing bootloader's kernel arguments"
+ help
+ sent by bootloader will be ignored.
+
endchoice
-
+
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -4,6 +4,8 @@
-
+
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
#define do_extend_cmdline 0
#endif
@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
- return cell_size;
+ return cell_size;
}
-
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
- char cmdline[COMMAND_LINE_SIZE];
+ char cmdline[COMMAND_LINE_SIZE];
@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
+
+ /* and append the ATAG_CMDLINE */
+ if (fdt_cmdline) {
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //save original bootloader args
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
+
+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
+ len = strlen(fdt_cmdline);
+ if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+ *ptr++ = ' ';
+ memcpy(ptr, fdt_cmdline, len);
+ ptr += len;
+ }
+#endif
- }
- *ptr = '\0';
-
+ }
+ *ptr = '\0';
+
@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
+ else
+ setprop_string(fdt, "/chosen", "bootargs",
+ atag->u.cmdline.cmdline);
- } else if (atag->hdr.tag == ATAG_MEM) {
+ }
+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
+ if (memcount >= sizeof(mem_reg_property)/4)
+ continue;
+ if (!atag->u.mem.size)
@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
+ setprop(fdt, "/memory", "reg", mem_reg_property,
+ 4 * memcount * memsize);
+ }
+#else
+
+ }
+#endif
-
- return fdt_pack(fdt);
+
+ return fdt_pack(fdt);
}
--- a/init/main.c
+++ b/init/main.c
@@ -95,6 +95,10 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
-
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#include <linux/of.h>
+#endif
+
static int kernel_init(void *);
-
+
extern void init_IRQ(void);
@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
+ page_alloc_init();
+
+ pr_notice("Kernel command line: %s\n", boot_command_line);
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //Show bootloader's original command line for reference
+ }
+#endif
+
- parse_early_param();
- after_dashes = parse_args("Booting kernel",
- static_command_line, __start___param,
+ parse_early_param();
+ after_dashes = parse_args("Booting kernel",
+ static_command_line, __start___param,
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -699,6 +699,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8084-mtp.dtb \
- qcom-ipq4019-ap.dk01.1-c1.dtb \
- qcom-ipq8064-ap148.dtb \
+ qcom-apq8084-mtp.dtb \
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
+ qcom-ipq8064-db149.dtb \
+ qcom-ipq8064-wpq864.dtb \
+ qcom-ipq8065-nbg6817.dtb \
+ qcom-ipq8065-r7800.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-lge-nexus5-hammerhead.dtb \
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
- cpumask_t mask;
- bool use_scm_power_down = false;
-
+ cpumask_t mask;
+ bool use_scm_power_down = false;
+
+ if (!qcom_scm_is_available())
+ return -EPROBE_DEFER;
+
- for (i = 0; ; i++) {
- state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
- if (!state_node)
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -91,6 +91,8 @@
- struct clk *iface_clk;
- struct clk *core_clk;
- struct clk *phy_clk;
+@@ -91,6 +91,8 @@ struct qcom_pcie_resources_2_1_0 {
+ struct clk *iface_clk;
+ struct clk *core_clk;
+ struct clk *phy_clk;
+ struct clk *aux_clk;
+ struct clk *ref_clk;
- struct reset_control *pci_reset;
- struct reset_control *axi_reset;
- struct reset_control *ahb_reset;
-@@ -249,6 +251,14 @@
- if (IS_ERR(res->phy_clk))
- return PTR_ERR(res->phy_clk);
-
+ struct reset_control *pci_reset;
+ struct reset_control *axi_reset;
+ struct reset_control *ahb_reset;
+@@ -249,6 +251,14 @@ static int qcom_pcie_get_resources_2_1_0
+ if (IS_ERR(res->phy_clk))
+ return PTR_ERR(res->phy_clk);
+
+ res->aux_clk = devm_clk_get(dev, "aux");
+ if (IS_ERR(res->aux_clk))
+ return PTR_ERR(res->aux_clk);
+ if (IS_ERR(res->ref_clk))
+ return PTR_ERR(res->ref_clk);
+
- res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
- if (IS_ERR(res->pci_reset))
- return PTR_ERR(res->pci_reset);
-@@ -281,6 +291,8 @@
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
+ res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
+ if (IS_ERR(res->pci_reset))
+ return PTR_ERR(res->pci_reset);
+@@ -281,6 +291,8 @@ static void qcom_pcie_deinit_2_1_0(struc
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+ clk_disable_unprepare(res->phy_clk);
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->ref_clk);
- regulator_disable(res->vdda);
- regulator_disable(res->vdda_phy);
- regulator_disable(res->vdda_refclk);
-@@ -324,16 +336,28 @@
- goto err_assert_ahb;
- }
-
+ regulator_disable(res->vdda);
+ regulator_disable(res->vdda_phy);
+ regulator_disable(res->vdda_refclk);
+@@ -324,16 +336,28 @@ static int qcom_pcie_init_2_1_0(struct q
+ goto err_assert_ahb;
+ }
+
+ ret = clk_prepare_enable(res->core_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable core clock\n");
+ goto err_clk_core;
+ }
+
- ret = clk_prepare_enable(res->phy_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable phy clock\n");
- goto err_clk_phy;
- }
-
+ ret = clk_prepare_enable(res->phy_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable phy clock\n");
+ goto err_clk_phy;
+ }
+
- ret = clk_prepare_enable(res->core_clk);
+ ret = clk_prepare_enable(res->aux_clk);
- if (ret) {
+ if (ret) {
- dev_err(dev, "cannot prepare/enable core clock\n");
- goto err_clk_core;
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable ref clock\n");
+ goto err_clk_ref;
- }
-
- ret = reset_control_deassert(res->ahb_reset);
-@@ -389,10 +413,14 @@
- return 0;
-
+ }
+
+ ret = reset_control_deassert(res->ahb_reset);
+@@ -389,10 +413,14 @@ static int qcom_pcie_init_2_1_0(struct q
+ return 0;
+
err_deassert_ahb:
- clk_disable_unprepare(res->core_clk);
-err_clk_core:
+err_clk_ref:
+ clk_disable_unprepare(res->aux_clk);
+err_clk_aux:
- clk_disable_unprepare(res->phy_clk);
+ clk_disable_unprepare(res->phy_clk);
err_clk_phy:
+ clk_disable_unprepare(res->core_clk);
+err_clk_core:
- clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->iface_clk);
err_assert_ahb:
- regulator_disable(res->vdda_phy);
+ regulator_disable(res->vdda_phy);
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -98,6 +98,7 @@
+@@ -98,6 +98,7 @@ struct qcom_pcie_resources_2_1_0 {
struct reset_control *ahb_reset;
struct reset_control *por_reset;
struct reset_control *phy_reset;
struct regulator *vdda;
struct regulator *vdda_phy;
struct regulator *vdda_refclk;
-@@ -275,6 +276,10 @@
+@@ -275,6 +276,10 @@ static int qcom_pcie_get_resources_2_1_0
if (IS_ERR(res->por_reset))
return PTR_ERR(res->por_reset);
-
+
+ res->ext_reset = devm_reset_control_get(dev, "ext");
+ if (IS_ERR(res->ext_reset))
+ return PTR_ERR(res->ext_reset);
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
return PTR_ERR_OR_ZERO(res->phy_reset);
}
-@@ -288,6 +293,7 @@
+@@ -288,6 +293,7 @@ static void qcom_pcie_deinit_2_1_0(struc
reset_control_assert(res->ahb_reset);
reset_control_assert(res->por_reset);
reset_control_assert(res->pci_reset);
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
clk_disable_unprepare(res->phy_clk);
-@@ -306,6 +312,12 @@
+@@ -306,6 +312,12 @@ static int qcom_pcie_init_2_1_0(struct q
u32 val;
int ret;
-
+
+ ret = reset_control_assert(res->ahb_reset);
+ if (ret) {
+ dev_err(dev, "cannot assert ahb reset\n");
ret = regulator_enable(res->vdda);
if (ret) {
dev_err(dev, "cannot enable vdda regulator\n");
-@@ -324,16 +336,16 @@
+@@ -324,16 +336,16 @@ static int qcom_pcie_init_2_1_0(struct q
goto err_vdda_phy;
}
-
+
- ret = reset_control_assert(res->ahb_reset);
+ ret = reset_control_deassert(res->ext_reset);
if (ret) {
+ dev_err(dev, "cannot assert ext reset\n");
+ goto err_reset_ext;
}
-
+
ret = clk_prepare_enable(res->iface_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable iface clock\n");
- goto err_assert_ahb;
+ goto err_iface;
}
-
+
ret = clk_prepare_enable(res->core_clk);
-@@ -422,7 +434,9 @@
+@@ -422,7 +434,9 @@ err_clk_phy:
clk_disable_unprepare(res->core_clk);
err_clk_core:
clk_disable_unprepare(res->iface_clk);
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -52,7 +52,13 @@
#define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
-
+
#define PCIE20_PARF_PHY_CTRL 0x40
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
@@ -83,6 +89,18 @@
#define DBI_RO_WR_EN 1
-
+
#define PERST_DELAY_US 1000
+/* PARF registers */
+#define PCIE20_PARF_PCS_DEEMPH 0x34
+
+#define PCIE20_PARF_CONFIG_BITS 0x50
+#define PHY_RX0_EQ(x) (x << 24)
-
+
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
-@@ -102,6 +120,7 @@
+@@ -102,6 +120,7 @@ struct qcom_pcie_resources_2_1_0 {
struct regulator *vdda;
struct regulator *vdda_phy;
struct regulator *vdda_refclk;
+ uint8_t phy_tx0_term_offset;
};
-
+
struct qcom_pcie_resources_1_0_0 {
-@@ -179,6 +198,16 @@
-
+@@ -179,6 +198,16 @@ struct qcom_pcie {
+
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-
+
+static inline void
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
+{
static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
{
gpiod_set_value_cansleep(pcie->reset, 1);
-@@ -280,6 +309,10 @@
+@@ -280,6 +309,10 @@ static int qcom_pcie_get_resources_2_1_0
if (IS_ERR(res->ext_reset))
return PTR_ERR(res->ext_reset);
-
+
+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
+ &res->phy_tx0_term_offset))
+ res->phy_tx0_term_offset = 0;
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
return PTR_ERR_OR_ZERO(res->phy_reset);
}
-@@ -309,7 +342,6 @@
+@@ -309,7 +342,6 @@ static int qcom_pcie_init_2_1_0(struct q
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- u32 val;
int ret;
-
+
ret = reset_control_assert(res->ahb_reset);
-@@ -378,15 +410,26 @@
+@@ -378,15 +410,26 @@ static int qcom_pcie_init_2_1_0(struct q
goto err_deassert_ahb;
}
-
+
- /* enable PCIe clocks and resets */
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
- val &= ~BIT(0);
+ /* Enable reference clock */
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
+ REF_USE_PAD, REF_SSP_EN);
-
+
ret = reset_control_deassert(res->phy_reset);
if (ret) {
@@ -83,6 +83,30 @@
#define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
#define PCIE_CAP_LINK1_VAL 0x2FD7F
-
+
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
+
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
+
#define PCIE20_PARF_Q2A_FLUSH 0x1AC
-
+
#define PCIE20_MISC_CONTROL_1_REG 0x8BC
-@@ -251,6 +275,57 @@
- writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
+@@ -251,6 +275,57 @@ static void qcom_pcie_2_1_0_ltssm_enable
+ writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
}
-
+
+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
+{
+ struct pcie_port *pp = &pcie->pci->pp;
+
static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
{
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-@@ -465,6 +538,9 @@
- writel(CFG_BRIDGE_SB_INIT,
- pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-
+ struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+@@ -465,6 +540,9 @@ static int qcom_pcie_init_2_1_0(struct q
+ writel(CFG_BRIDGE_SB_INIT,
+ pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
+
- return 0;
-
+ return 0;
+
err_deassert_ahb:
@@ -129,6 +129,8 @@
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
-
+
+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
+
struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
- struct clk *core_clk;
-@@ -218,6 +220,7 @@
- struct phy *phy;
- struct gpio_desc *reset;
- struct qcom_pcie_ops *ops;
+ struct clk *iface_clk;
+ struct clk *core_clk;
+@@ -218,6 +220,7 @@ struct qcom_pcie {
+ struct phy *phy;
+ struct gpio_desc *reset;
+ struct qcom_pcie_ops *ops;
+ uint32_t force_gen1;
};
-
+
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-@@ -532,6 +535,11 @@
-
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
+@@ -532,6 +535,11 @@ static int qcom_pcie_init_2_1_0(struct q
+
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+ if (pcie->force_gen1) {
+ writel_relaxed((readl_relaxed(
+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+ }
-
-
- /* Set the Max TLP size to 2K, instead of using default of 4K */
-@@ -1382,6 +1390,8 @@
- struct dw_pcie *pci;
- struct qcom_pcie *pcie;
- int ret;
+
+
+ /* Set the Max TLP size to 2K, instead of using default of 4K */
+@@ -1382,6 +1390,8 @@ static int qcom_pcie_probe(struct platfo
+ struct dw_pcie *pci;
+ struct qcom_pcie *pcie;
+ int ret;
+ uint32_t force_gen1 = 0;
+ struct device_node *np = pdev->dev.of_node;
-
- pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
- if (!pcie)
-@@ -1403,6 +1413,9 @@
- if (IS_ERR(pcie->reset))
- return PTR_ERR(pcie->reset);
-
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+@@ -1403,6 +1413,9 @@ static int qcom_pcie_probe(struct platfo
+ if (IS_ERR(pcie->reset))
+ return PTR_ERR(pcie->reset);
+
+ of_property_read_u32(np, "force_gen1", &force_gen1);
+ pcie->force_gen1 = force_gen1;
+
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
- pcie->parf = devm_ioremap_resource(dev, res);
- if (IS_ERR(pcie->parf))
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+ pcie->parf = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->parf))
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -131,6 +131,14 @@
-
+
#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
-
+
+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
+#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
+#define PCIE20_DEV_CAS 0x78
+#define PCIE20_MPS(x) __set(x, 7, 5)
+
struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
- struct clk *core_clk;
-@@ -1472,6 +1480,35 @@
- return 0;
+ struct clk *iface_clk;
+ struct clk *core_clk;
+@@ -1472,6 +1480,35 @@ static int qcom_pcie_probe(struct platfo
+ return 0;
}
-
+
+static void qcom_pcie_fixup_final(struct pci_dev *dev)
+{
+ int cap, err;
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
+
static const struct of_device_id qcom_pcie_match[] = {
- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+ { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
+ { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -407,6 +407,7 @@
+@@ -407,6 +407,7 @@ static void qcom_pcie_deinit_2_1_0(struc
{
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
+ struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+
+ clk_disable_unprepare(res->phy_clk);
- reset_control_assert(res->pci_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
-@@ -415,7 +415,6 @@
- reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
+ reset_control_assert(res->pci_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+@@ -415,7 +416,6 @@ static void qcom_pcie_deinit_2_1_0(struc
+ reset_control_assert(res->ext_reset);
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
- clk_disable_unprepare(res->aux_clk);
- clk_disable_unprepare(res->ref_clk);
- regulator_disable(res->vdda);
-@@ -472,12 +472,6 @@
- goto err_clk_core;
- }
-
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->ref_clk);
+ regulator_disable(res->vdda);
+@@ -472,12 +472,6 @@ static int qcom_pcie_init_2_1_0(struct q
+ goto err_clk_core;
+ }
+
- ret = clk_prepare_enable(res->phy_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable phy clock\n");
- goto err_clk_phy;
- }
-
- ret = clk_prepare_enable(res->aux_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable aux clock\n");
-@@ -541,6 +535,12 @@
- return ret;
- }
-
+ ret = clk_prepare_enable(res->aux_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+@@ -541,6 +535,12 @@ static int qcom_pcie_init_2_1_0(struct q
+ return ret;
+ }
+
+ ret = clk_prepare_enable(res->phy_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable phy clock\n");
+ goto err_deassert_ahb;
+ }
+
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
- if (pcie->force_gen1) {
-@@ -566,8 +566,6 @@
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+ if (pcie->force_gen1) {
+@@ -566,8 +566,6 @@ err_deassert_ahb:
err_clk_ref:
- clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->aux_clk);
err_clk_aux:
- clk_disable_unprepare(res->phy_clk);
-err_clk_phy:
- clk_disable_unprepare(res->core_clk);
+ clk_disable_unprepare(res->core_clk);
err_clk_core:
- clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->iface_clk);
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -408,7 +408,7 @@
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
- clk_disable_unprepare(res->phy_clk);
+@@ -408,7 +408,7 @@ static void qcom_pcie_deinit_2_1_0(struc
+ struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+
+ clk_disable_unprepare(res->phy_clk);
- reset_control_assert(res->pci_reset);
+ reset_control_assert(res->phy_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
-@@ -422,6 +422,9 @@
- { .compatible = "qcom,scm-msm8996",
- .data = NULL, /* no clocks */
- },
+@@ -422,6 +422,9 @@ static const struct of_device_id qcom_sc
+ { .compatible = "qcom,scm-msm8996",
+ .data = NULL, /* no clocks */
+ },
+ { .compatible = "qcom,scm-ipq806x",
+ .data = NULL, /* no clocks */
+ },
- { .compatible = "qcom,scm",
- .data = (void *)(SCM_HAS_CORE_CLK
- | SCM_HAS_IFACE_CLK
+ { .compatible = "qcom,scm",
+ .data = (void *)(SCM_HAS_CORE_CLK
+ | SCM_HAS_IFACE_CLK
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
-@@ -561,6 +561,24 @@
- return ret ? : le32_to_cpu(out);
+@@ -561,6 +561,24 @@ int __qcom_scm_pas_mss_reset(struct devi
+ return ret ? : le32_to_cpu(out);
}
-
+
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
+{
+ s32 ret;
+
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
{
- struct {
+ struct {
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
-@@ -366,6 +366,16 @@
- return ret ? : res.a1;
+@@ -366,6 +366,16 @@ int __qcom_scm_pas_mss_reset(struct devi
+ return ret ? : res.a1;
}
-
+
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
+{
+ return -ENOTSUPP;
+
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
{
- struct qcom_scm_desc desc = {0};
+ struct qcom_scm_desc desc = {0};
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
- return platform_driver_register(&qcom_scm_driver);
+ return platform_driver_register(&qcom_scm_driver);
}
subsys_initcall(qcom_scm_init);
+
@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese
extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
-
+
+#define SCM_IO_READ 1
+#define SCM_IO_WRITE 2
+#define SCM_SVC_IO_ACCESS 0x5
#include "../core.h"
#include "../pinconf.h"
#include "pinctrl-msm.h"
-@@ -638,6 +639,9 @@ static int msm_gpio_irq_set_type(struct
- const struct msm_pingroup *g;
- unsigned long flags;
- u32 val;
+@@ -638,6 +639,9 @@ static void msm_gpio_irq_ack(struct irq_
+ const struct msm_pingroup *g;
+ unsigned long flags;
+ u32 val;
+ u32 addr;
+ int ret;
+ const __be32 *reg;
-
- g = &pctrl->soc->groups[d->hwirq];
-
+
+ g = &pctrl->soc->groups[d->hwirq];
+
@@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct
- else
- clear_bit(d->hwirq, pctrl->dual_edge_irqs);
-
+ else
+ clear_bit(d->hwirq, pctrl->dual_edge_irqs);
+
+ int ret = of_device_is_compatible(pctrl->dev->of_node,
+ "qcom,ipq8064-pinctrl");
- /* Route interrupts to application cpu */
+ /* Route interrupts to application cpu */
- val = readl(pctrl->regs + g->intr_target_reg);
- val &= ~(7 << g->intr_target_bit);
- val |= g->intr_target_kpss_val << g->intr_target_bit;
+ pr_err("\n Routing interrupts to Apps proc failed");
+ }
+ }
-
- /* Update configuration for gpio.
- * RAW_STATUS_EN is left on for all gpio irqs. Due to the
+
+ /* Update configuration for gpio.
+ * RAW_STATUS_EN is left on for all gpio irqs. Due to the
@@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d
- return 0;
+ return 0;
}
EXPORT_SYMBOL(msm_pinctrl_remove);
-
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
-@@ -43,6 +43,8 @@
+@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
#else
static inline
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-@@ -73,5 +75,7 @@
+@@ -73,5 +75,7 @@ qcom_scm_set_remote_state(u32 state,u32
static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
-@@ -33,6 +34,8 @@
- struct device *dev;
- struct clk **clks;
- int num_clocks;
+@@ -33,6 +34,8 @@ struct dwc3_of_simple {
+ struct device *dev;
+ struct clk **clks;
+ int num_clocks;
+ struct reset_control *mstr_rst_30_0;
+ struct reset_control *mstr_rst_30_1;
};
-
+
static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
-@@ -102,6 +105,20 @@
- if (ret)
- return ret;
-
+@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p
+ if (ret)
+ return ret;
+
+ simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
+
+ if (!IS_ERR(simple->mstr_rst_30_0))
+ else
+ dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
+
- ret = of_platform_populate(np, NULL, NULL, dev);
- if (ret) {
- for (i = 0; i < simple->num_clocks; i++) {
-@@ -130,6 +147,12 @@
- clk_put(simple->clks[i]);
- }
-
+ ret = of_platform_populate(np, NULL, NULL, dev);
+ if (ret) {
+ for (i = 0; i < simple->num_clocks; i++) {
+@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct
+ clk_put(simple->clks[i]);
+ }
+
+ if (!IS_ERR(simple->mstr_rst_30_0))
+ reset_control_assert(simple->mstr_rst_30_0);
+
+ if (!IS_ERR(simple->mstr_rst_30_1))
+ reset_control_assert(simple->mstr_rst_30_1);
+
- of_platform_depopulate(dev);
-
- pm_runtime_put_sync(dev);
+ of_platform_depopulate(dev);
+
+ pm_runtime_put_sync(dev);
---
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1023,7 +1023,7 @@
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+@@ -1023,7 +1023,7 @@ static const struct flash_info spi_nor_i
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
+ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
+obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/
-
+
# Interconnect bus driver for OMAP SoCs.
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -93,6 +93,8 @@ config MVEBU_MBUS
- Driver needed for the MBus configuration on Marvell EBU SoCs
- (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
-
+ Driver needed for the MBus configuration on Marvell EBU SoCs
+ (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+
+source "drivers/bus/msm_bus/Kconfig"
+
config OMAP_INTERCONNECT
- tristate "OMAP INTERCONNECT DRIVER"
- depends on ARCH_OMAP2PLUS
+ tristate "OMAP INTERCONNECT DRIVER"
+ depends on ARCH_OMAP2PLUS
--- /dev/null
+++ b/include/dt-bindings/msm/msm-bus-ids.h
@@ -0,0 +1,869 @@
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -78,6 +78,13 @@ config QCOM_SMSM
- Say yes here to support the Qualcomm Shared Memory State Machine.
- The state machine is represented by bits in shared memory.
-
+ Say yes here to support the Qualcomm Shared Memory State Machine.
+ The state machine is represented by bits in shared memory.
+
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM
+ functions for various peripherals.
+
config QCOM_WCNSS_CTRL
- tristate "Qualcomm WCNSS control driver"
- depends on ARCH_QCOM
+ tristate "Qualcomm WCNSS control driver"
+ depends on ARCH_QCOM
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,98 @@
--- a/drivers/soc/lantiq/gphy.c
+++ b/drivers/soc/lantiq/gphy.c
-@@ -56,6 +56,7 @@ static const struct xway_gphy_match_data
+@@ -55,6 +55,7 @@ static const struct xway_gphy_match_data
};
static const struct of_device_id xway_gphy_match[] = {
{ .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
{ .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
{ .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
-@@ -130,6 +131,16 @@ static int xway_gphy_of_probe(struct pla
+@@ -111,6 +112,16 @@ static int xway_gphy_of_probe(struct pla
gphy_fw_name_cfg = of_device_get_match_data(dev);
+++ /dev/null
-From ae14aba7fc748b2da282b59a2f516a311ed1f6eb Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Tue, 27 Mar 2018 23:15:07 +0200
-Subject: [PATCH] MIPS: lantiq: gphy: Remove reboot/remove reset asserts
-
-While doing a global software reset, these bits are not cleared and let
-some bootloader fail to initialise the GPHYs. The bootloader don't expect
-these bits to be set, as they aren't during power on.
-
-The asserts were a workaround for a wrong syscon-reboot mask. With a mask
-set which includes the GPHY resets of the first reset register, the
-resets of the second reset register arn't required any more.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- drivers/soc/lantiq/gphy.c | 34 ----------------------------------
- 1 file changed, 34 deletions(-)
-
---- a/drivers/soc/lantiq/gphy.c
-+++ b/drivers/soc/lantiq/gphy.c
-@@ -30,7 +30,6 @@ struct xway_gphy_priv {
- struct clk *gphy_clk_gate;
- struct reset_control *gphy_reset;
- struct reset_control *gphy_reset2;
-- struct notifier_block gphy_reboot_nb;
- void __iomem *membase;
- char *fw_name;
- };
-@@ -65,24 +64,6 @@ static const struct of_device_id xway_gp
- };
- MODULE_DEVICE_TABLE(of, xway_gphy_match);
-
--static struct xway_gphy_priv *to_xway_gphy_priv(struct notifier_block *nb)
--{
-- return container_of(nb, struct xway_gphy_priv, gphy_reboot_nb);
--}
--
--static int xway_gphy_reboot_notify(struct notifier_block *reboot_nb,
-- unsigned long code, void *unused)
--{
-- struct xway_gphy_priv *priv = to_xway_gphy_priv(reboot_nb);
--
-- if (priv) {
-- reset_control_assert(priv->gphy_reset);
-- reset_control_assert(priv->gphy_reset2);
-- }
--
-- return NOTIFY_DONE;
--}
--
- static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
- dma_addr_t *dev_addr)
- {
-@@ -216,14 +197,6 @@ static int xway_gphy_probe(struct platfo
- reset_control_deassert(priv->gphy_reset);
- reset_control_deassert(priv->gphy_reset2);
-
-- /* assert the gphy reset because it can hang after a reboot: */
-- priv->gphy_reboot_nb.notifier_call = xway_gphy_reboot_notify;
-- priv->gphy_reboot_nb.priority = -1;
--
-- ret = register_reboot_notifier(&priv->gphy_reboot_nb);
-- if (ret)
-- dev_warn(dev, "Failed to register reboot notifier\n");
--
- platform_set_drvdata(pdev, priv);
-
- return ret;
-@@ -235,17 +208,10 @@ static int xway_gphy_remove(struct platf
- struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
- int ret;
-
-- reset_control_assert(priv->gphy_reset);
-- reset_control_assert(priv->gphy_reset2);
--
- iowrite32be(0, priv->membase);
-
- clk_disable_unprepare(priv->gphy_clk_gate);
-
-- ret = unregister_reboot_notifier(&priv->gphy_reboot_nb);
-- if (ret)
-- dev_warn(dev, "Failed to unregister reboot notifier\n");
--
- return 0;
- }
-
}
static const struct of_device_id mt7530_of_match[] = {
-@@ -1135,16 +1142,16 @@ static const struct of_device_id mt7530_
- { /* sentinel */ },
+@@ -1136,16 +1143,16 @@ static const struct of_device_id mt7530_
};
+ MODULE_DEVICE_TABLE(of, mt7530_of_match);
-static struct mdio_driver mt7530_mdio_driver = {
+static struct platform_driver mtk_mt7530_driver = {
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1948,6 +1948,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -3,6 +3,8 @@
+@@ -4,6 +4,8 @@
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
#else
#define do_extend_cmdline 0
#endif
-@@ -66,6 +68,65 @@ static uint32_t get_cell_size(const void
+@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void
return cell_size;
}
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
-@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt
+@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
}
*ptr = '\0';
-@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void *
+@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void *
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
-@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void *
+@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void *
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
}
--- a/init/main.c
+++ b/init/main.c
-@@ -89,6 +89,10 @@
+@@ -95,6 +95,10 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
static int kernel_init(void *);
extern void init_IRQ(void);
-@@ -540,6 +544,18 @@ asmlinkage __visible void __init start_k
+@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3961,6 +3961,15 @@ static int mvneta_ethtool_set_wol(struct
+@@ -3962,6 +3962,15 @@ static int mvneta_ethtool_set_wol(struct
return ret;
}
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
-@@ -3971,6 +3980,7 @@ static const struct net_device_ops mvnet
+@@ -3972,6 +3981,7 @@ static const struct net_device_ops mvnet
.ndo_fix_features = mvneta_fix_features,
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_do_ioctl = mvneta_ioctl,
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
-@@ -1214,10 +1233,6 @@ static void mvneta_port_disable(struct m
+@@ -1215,10 +1234,6 @@ static void mvneta_port_disable(struct m
val &= ~MVNETA_GMAC0_PORT_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
udelay(200);
}
-@@ -1277,44 +1292,6 @@ static void mvneta_set_other_mcast_table
+@@ -1278,44 +1293,6 @@ static void mvneta_set_other_mcast_table
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
}
static void mvneta_percpu_unmask_interrupt(void *arg)
{
struct mvneta_port *pp = arg;
-@@ -1467,7 +1444,6 @@ static void mvneta_defaults_set(struct m
+@@ -1468,7 +1445,6 @@ static void mvneta_defaults_set(struct m
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
-@@ -2692,26 +2668,11 @@ static irqreturn_t mvneta_percpu_isr(int
+@@ -2693,26 +2669,11 @@ static irqreturn_t mvneta_percpu_isr(int
return IRQ_HANDLED;
}
}
/* NAPI handler
-@@ -2727,7 +2688,6 @@ static int mvneta_poll(struct napi_struc
+@@ -2728,7 +2689,6 @@ static int mvneta_poll(struct napi_struc
u32 cause_rx_tx;
int rx_queue;
struct mvneta_port *pp = netdev_priv(napi->dev);
struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
if (!netif_running(pp->dev)) {
-@@ -2741,12 +2701,11 @@ static int mvneta_poll(struct napi_struc
+@@ -2742,12 +2702,11 @@ static int mvneta_poll(struct napi_struc
u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
}
/* Release Tx descriptors */
-@@ -3060,7 +3019,6 @@ static int mvneta_setup_txqs(struct mvne
+@@ -3061,7 +3020,6 @@ static int mvneta_setup_txqs(struct mvne
static void mvneta_start_dev(struct mvneta_port *pp)
{
int cpu;
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-@@ -3088,16 +3046,15 @@ static void mvneta_start_dev(struct mvne
+@@ -3089,16 +3047,15 @@ static void mvneta_start_dev(struct mvne
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE);
if (!pp->neta_armada3700) {
for_each_online_cpu(cpu) {
-@@ -3251,103 +3208,232 @@ static int mvneta_set_mac_addr(struct ne
+@@ -3252,103 +3209,232 @@ static int mvneta_set_mac_addr(struct ne
return 0;
}
}
/* Electing a CPU must be done in an atomic way: it should be done
-@@ -3626,10 +3712,9 @@ static int mvneta_stop(struct net_device
+@@ -3627,10 +3713,9 @@ static int mvneta_stop(struct net_device
static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
}
/* Ethtool methods */
-@@ -3640,44 +3725,25 @@ mvneta_ethtool_set_link_ksettings(struct
+@@ -3641,44 +3726,25 @@ mvneta_ethtool_set_link_ksettings(struct
const struct ethtool_link_ksettings *cmd)
{
struct mvneta_port *pp = netdev_priv(ndev);
}
/* Set interrupt coalescing for ethtools */
-@@ -3769,6 +3835,22 @@ static int mvneta_ethtool_set_ringparam(
+@@ -3770,6 +3836,22 @@ static int mvneta_ethtool_set_ringparam(
return 0;
}
static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
u8 *data)
{
-@@ -3785,26 +3867,35 @@ static void mvneta_ethtool_update_stats(
+@@ -3786,26 +3868,35 @@ static void mvneta_ethtool_update_stats(
{
const struct mvneta_statistic *s;
void __iomem *base = pp->base;
}
}
-@@ -3939,28 +4030,65 @@ static int mvneta_ethtool_get_rxfh(struc
+@@ -3940,28 +4031,65 @@ static int mvneta_ethtool_get_rxfh(struc
static void mvneta_ethtool_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
void *accel_priv,
select_queue_fallback_t fallback)
-@@ -3984,13 +4112,15 @@ static const struct net_device_ops mvnet
+@@ -3985,13 +4113,15 @@ static const struct net_device_ops mvnet
};
static const struct ethtool_ops mvneta_eth_tool_ops = {
.get_strings = mvneta_ethtool_get_strings,
.get_ethtool_stats = mvneta_ethtool_get_stats,
.get_sset_count = mvneta_ethtool_get_sset_count,
-@@ -3998,10 +4128,12 @@ static const struct ethtool_ops mvneta_e
+@@ -3999,10 +4129,12 @@ static const struct ethtool_ops mvneta_e
.get_rxnfc = mvneta_ethtool_get_rxnfc,
.get_rxfh = mvneta_ethtool_get_rxfh,
.set_rxfh = mvneta_ethtool_set_rxfh,
};
/* Initialize hw */
-@@ -4146,14 +4278,13 @@ static int mvneta_probe(struct platform_
+@@ -4147,14 +4279,13 @@ static int mvneta_probe(struct platform_
{
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
int tx_csum_limit;
int phy_mode;
int err;
-@@ -4169,31 +4300,11 @@ static int mvneta_probe(struct platform_
+@@ -4170,31 +4301,11 @@ static int mvneta_probe(struct platform_
goto err_free_netdev;
}
}
dev->tx_queue_len = MVNETA_MAX_TXD;
-@@ -4204,12 +4315,7 @@ static int mvneta_probe(struct platform_
+@@ -4205,12 +4316,7 @@ static int mvneta_probe(struct platform_
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);
pp->rxq_def = rxq_def;
-@@ -4231,7 +4337,7 @@ static int mvneta_probe(struct platform_
+@@ -4232,7 +4338,7 @@ static int mvneta_probe(struct platform_
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
err = PTR_ERR(pp->clk);
}
clk_prepare_enable(pp->clk);
-@@ -4357,6 +4463,14 @@ static int mvneta_probe(struct platform_
+@@ -4358,6 +4464,14 @@ static int mvneta_probe(struct platform_
/* 9676 == 9700 - 20 and rounding to 8 */
dev->max_mtu = 9676;
err = register_netdev(dev);
if (err < 0) {
dev_err(&pdev->dev, "failed to register\n");
-@@ -4368,14 +4482,6 @@ static int mvneta_probe(struct platform_
+@@ -4369,14 +4483,6 @@ static int mvneta_probe(struct platform_
platform_set_drvdata(pdev, pp->dev);
return 0;
err_netdev:
-@@ -4386,16 +4492,14 @@ err_netdev:
+@@ -4387,16 +4493,14 @@ err_netdev:
1 << pp->id);
}
err_free_stats:
err_free_irq:
irq_dispose_mapping(dev->irq);
err_free_netdev:
-@@ -4407,7 +4511,6 @@ err_free_netdev:
+@@ -4408,7 +4512,6 @@ err_free_netdev:
static int mvneta_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct mvneta_port *pp = netdev_priv(dev);
unregister_netdev(dev);
-@@ -4415,10 +4518,8 @@ static int mvneta_remove(struct platform
+@@ -4416,10 +4519,8 @@ static int mvneta_remove(struct platform
clk_disable_unprepare(pp->clk);
free_percpu(pp->ports);
free_percpu(pp->stats);
free_netdev(dev);
if (pp->bm_priv) {
-@@ -4470,9 +4571,6 @@ static int mvneta_resume(struct device *
+@@ -4471,9 +4572,6 @@ static int mvneta_resume(struct device *
return err;
}
struct device_node *dn;
unsigned int tx_csum_limit;
struct phylink *phylink;
-@@ -4315,6 +4316,7 @@ static int mvneta_probe(struct platform_
+@@ -4316,6 +4317,7 @@ static int mvneta_probe(struct platform_
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2704,8 +2704,7 @@ static int mvneta_poll(struct napi_struc
+@@ -2705,8 +2705,7 @@ static int mvneta_poll(struct napi_struc
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
mvneta_link_change(pp);
}
-@@ -3044,8 +3043,7 @@ static void mvneta_start_dev(struct mvne
+@@ -3045,8 +3044,7 @@ static void mvneta_start_dev(struct mvne
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
phylink_start(pp->phylink);
netif_tx_start_all_queues(pp->dev);
-@@ -3542,8 +3540,7 @@ static int mvneta_cpu_online(unsigned in
+@@ -3543,8 +3541,7 @@ static int mvneta_cpu_online(unsigned in
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
netif_tx_start_all_queues(pp->dev);
spin_unlock(&pp->lock);
return 0;
-@@ -3584,8 +3581,7 @@ static int mvneta_cpu_dead(unsigned int
+@@ -3585,8 +3582,7 @@ static int mvneta_cpu_dead(unsigned int
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4045,6 +4045,22 @@ static int mvneta_ethtool_set_wol(struct
+@@ -4046,6 +4046,22 @@ static int mvneta_ethtool_set_wol(struct
return ret;
}
static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
-@@ -4129,6 +4145,8 @@ static const struct ethtool_ops mvneta_e
+@@ -4130,6 +4146,8 @@ static const struct ethtool_ops mvneta_e
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4045,22 +4045,6 @@ static int mvneta_ethtool_set_wol(struct
+@@ -4046,22 +4046,6 @@ static int mvneta_ethtool_set_wol(struct
return ret;
}
static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
-@@ -4145,8 +4129,6 @@ static const struct ethtool_ops mvneta_e
+@@ -4146,8 +4130,6 @@ static const struct ethtool_ops mvneta_e
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
-@@ -5075,6 +5076,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
+@@ -5105,6 +5106,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
retval = -ENOMEM;
projects / openwrt / openwrt.git / commitdiff